USGS Science⌕ Search

SEARCH · USGS Science

Results for “Chemical Physics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources
USGS1978

Chabazite in siliceous tuffs of a Pliocene lacustrine deposit near Durkee, Baker County, Oregon

A relatively pure chabazite deposit of at least 75 X 10 6 metric tons occurs near the Durkee type locality of erionite. This erionite is in a welded tuff interbedded with lacustrine rocks- of a closed Pliocene basin. The zeolites, chabazite, erionite, clinoptilolite, and other authigenic silicate minerals are confined to a 27-square-kilometer area of altered rocks enclosed in relatively freshwater lacustrine beds. About 135 meters of the lower part of the 350-m stratigraphic section at the southeastern part of the lake basin contain zeolitic tuff. The chabazite is an early product of the reaction between glass of rhyolitic or dacitic composition and alkaline (pH>9) saline lake waters. Erionite, clinoptilolite, analcime, and potassium feldspar follow chabazite in the paragenetic sequence. At the erionite type locality, chabazite and clinoptilolite form megascopic crystal clusters within fractures and cavities in unaltered welded tuff. Elsewhere in the basin, most zeolite crystals in the altered airfall or reworked tuffs are less than 80 micrometers long. Chemical analyses, unit-cell determinations, and mean indices of refraction show that fine-grained chabazite varies in composition and physical parameters.

Oregon↗
USGS1956

Host rocks and their alterations as related to uranium-bearing veins in the United States

This paper, dealing with the different kinds of host rocks and their alterations associated with uranium-bearing veins in the United States, is a chapter of a comprehensive report entitled , "Geology of uranium-bearing vein deposits in the United States," in preparation by George W. Walker, Frank W. Osterwald, and others. The comprehensive report will include detailed information on tectonic and structural setting, kinds of host rocks, wall-rock alteration, mineralogy, physical characteristics, processes of deposition, and concepts of origin of uraniferous veins; but, because it will not be completed until sometime in the future, some chapters of the report are being transmitted as they are finished. Part of an introductory chapter to the comprehensive report entitled, "Classification and distribution of uranium-bearing veins in the United States" (Walker and Osterwald, 1956) has already been transmitted; several of the terms used herein are defined in the introductory chapter. Data included in this chapter demonstrate that uranium-bearing veins are: 1) in rocks of nearly all textural, chemical, and mineralogic types; 2) most abundant in holocrystalline, commonly equigranular, igeneous and metamorphic rocks characterized by a moderate to high silica content and and by similar physical properties. Although some of the physiochemical properties of the host rocks are discussed in terms of favorability or nonfavoribility for uranium deposition, the principal purpose of this chapter is to establish the petroloic environment in which uranium-bearing veins have been found. Because favorability or nonfavorability of host rocks is related complexly to the chemistry of ore solutions and to methods or uranium transport and deposition, several hypothetical processes of transport and deposition have been referred to briefly; these and other hypotheses will be outlines and discussed in greater detail in a subsequent chapter. The compilation of data leading to this report and its preparation by a member of the Uranium Research and Resource Section, U.S. Geological Survey, was done on behalf of the Division of Raw Materials, U.S. Atomic Energy Commission. The report is based on both published and unpublished information collected principally by personnel of the U.S. Geological Survey, the U.S. Atomic Energy Commission or its predecessor organization, the Manhattan Engineer District, and to a lesser extent by staff members of other Federal or State agencies and by geologists in private industry. Information concerning foreign uranium-bearing vein deposits has been extracted almost exclusively from published reports; references to these and other data are included at appropriate places.

Trace Elements Investigations↗
USGS2010

Characterization of transport in an acidic and metal-rich mountain stream based on a lithium tracer injection and simulations of transient storage

Physical parameters characterizing solute transport in the Snake River (an acidic and metal-rich mountain stream near Montezuma, Colorado) were variable along a 5.2-km study reach. Stream cross-sectional area and volumetric inflow each varied by a factor of 3. Because of transient storage, the residence time of injected tracers in the Snake River was longer than would be calculated by consideration of convective travel time alone. Distributed inflows along the stream were a significant source of in-stream chemical variations. These transport characteristics of the Snake River were established on the basis of the assumption of lithium as an ideally conservative tracer and use of simulations of advection, dispersion, and transient storage. Evaluations of the validity of this combined tracer and simulation approach lend confidence to the estimation of the physical transport parameters, but further development is warranted for methods of onsite transport experimentation in hydrologically complex, chemically reactive environments.

Water Resources Research↗
USGS2004

Water-resources-related information for the Milwaukee Metropolitan Sewerage District planning area, Wisconsin, 1970-2002

The Milwaukee Metropolitan Sewerage District (MMSD) Corridor Study is a three-phase project designed to improve the understanding of water resources in the stream corridors of the MMSD planning area by initially compiling existing data and using the compiled information to develop 3-year baseline and long-term monitoring plans. This report is one of the products of Phase I of the Corridor Study. A literature review of surface-water-quality, surface water- quantity, and ecology studies conducted from 1970 through 2001 was completed and is summarized in this report. An inventory of Geographic Information System spatial coverages available for the MMSD planning area has been assembled. A database of water, sediment, and tissue (fish, shellfish, and others) chemistry, macroinvertebrates, fish, algae, habitat, geomorphic, and other physical and ecological data was compiled from data sets from MMSD, U.S. Geological Survey, Wisconsin Department of Natural Resources, and the U.S. Environmental Protection Agency. More than 2.7 million results are available in the MMSD Corridor Study database and the compilation of multiple datasets allows for retrieving data from a central database rather than from each of the source datasets. Data for 1970 through 2002 were collected for the 420-square-mile planning area by various agencies using different field data-collection and laboratory analysis methods. Chemical constituents and ecological components that are important to an urban setting and well represented in the database were selected for further investigation. Each constituent or component is described in this report with some or all of the following: a text summary, map of sampling locations, and in some cases median concentrations, statistical distributions of concentrations by subwatershed, table of summary statistics by subwatershed, and graphs of temporal and (or) seasonal trends. Physical data presented in the report include streamflow, stream stage, and precipitation data. Chemical indicators of water quality presented in the report include field measurements and miscellaneous constituents (pH, alkalinity, specific conductance, hardness, dissolved oxygen, biochemical oxygen demand, and chloride), sediment (total suspended solids and suspended sediment), nutrients (total nitrogen, nitrate, Kjeldahl nitrogen, total phosphorus, and dissolved phosphorus), trace elements (cadmium, mercury, copper, lead, arsenic, chromium, nickel, and zinc), pesticides (historically used pesticides and pesticides still in use), and polychlorinated biphenyls. Ecological indicators of water quality discussed in the report include community surveys of macroinvertebrates and fish, chlorophyll a concentrations, habitat assessments and channel-measurement data, and fecal coliform and E. coli bacterial counts. In addition to the compilation of the database, a major purpose of this investigation was to identify additional sampling that should be conducted under the baseline monitoring phase, which will be the second phase of the Corridor Study. Additional sampling may include: • Some subwatersheds, such as those in the headwaters. • Emerging contaminants such as pharmaceuticals and personal care products (PPCPs), human hormones, organic wastewater contaminants, and other constituents that result from human activity. • E. coli, which can serve as an indicator of health risk to swimmers and other recreational water users. • Pesticides in all media. • PCBs. • Trace elements in water, bed sediment, and tissues (fish, shellfish, and others). • Samples during winter months or during early snowmelt episodes to address constituents such as chloride and some nutrients that have seasonal variability and that may be affected by factors such as road deicing during the winter. • Samples for macroinvertebrate and fish-community data and habitat assessments. • Physical data such as stream-channel cross-section profiles, bridge-scour assessments, flood-plain maps, structures, and shoreline conditions.

Wisconsin↗
USGS2016

Evaluating harvest-based control of invasive fish with telemetry: Performance of sea lamprey traps in the Great Lakes

Physical removal (e.g., harvest via traps or nets) of mature individuals may be a cost-effective or socially acceptable alternative to chemical control strategies for invasive species, but requires knowledge of the spatial distribution of a population over time. We used acoustic telemetry to determine the current and possible future role of traps to control and assess invasive sea lampreys, Petromyzon marinus , in the St. Marys River, the connecting channel between Lake Superior and Lake Huron. Exploitation rates (i.e., fractions of an adult sea lamprey population removed by traps) at two upstream locations were compared among three years and two points of entry to the system. Telemetry receivers throughout the drainage allowed trap performance (exploitation rate) to be partitioned into two components: proportion of migrating sea lampreys that visited trap sites (availability) and proportion of available sea lampreys that were caught by traps (local trap efficiency). Estimated exploitation rates were well below those needed to provide population control in the absence of lampricides and were limited by availability and local trap efficiency. Local trap efficiency estimates for acoustic-tagged sea lampreys were lower than analogous estimates regularly obtained using traditional mark–recapture methods, suggesting that abundance had been previously underestimated. Results suggested major changes would be required to substantially increase catch, including improvements to existing traps, installation of new traps, or other modifications to attract and retain more sea lampreys. This case study also shows how bias associated with telemetry tags can be estimated and incorporated in models to improve inferences about parameters that are directly relevant to fishery management.

Ecological Applications↗
USGS2005

Chapter K: Progress in the Evaluation of Alkali-Aggregate Reaction in Concrete Construction in the Pacific Northwest, United States and Canada

The supply of aggregates suitable for use in construction and maintenance of infrastructure in western North America is a continuing concern to the engineering and resources-management community. Steady population growth throughout the region has fueled demand for high-quality aggregates, in the face of rapid depletion of existing aggregate resources and slow and difficult permitting of new sources of traditional aggregate types. In addition to these challenges, the requirement for aggregates to meet various engineering standards continues to increase. In addition to their physical-mechanical properties, other performance characteristics of construction aggregates specifically depend on their mineralogy and texture. These properties can result in deleterious chemical reactions when aggregate is used in concrete mixes. When this chemical reaction-termed 'alkali-aggregate reaction' (AAR)-occurs, it can pose a major problem for concrete structures, reducing their service life and requiring expensive repair or even replacement of the concrete. AAR is thus to be avoided in order to promote the longevity of concrete structures and to ensure that public moneys invested in infrastructure are well spent. Because the AAR phenomenon is directly related to the mineral composition, texture, and petrogenesis of the rock particles that make up aggregates, an understanding of the relation between the geology and the performance of aggregates in concrete is important. In the Pacific Northwest, some aggregates have a moderate to high AAR potential, but many others have no or only a low AAR potential. Overall, AAR is not as widespread or serious a problem in the Pacific Northwest as in other regions of North America. The identification of reactive aggregates in the Pacific Northwest and the accurate prediction of their behavior in concrete continue to present challenges for the assessment and management of geologic resources to the owners and operators of pits and quarries and to the users of the concrete aggregates mined from these deposits. This situation is complicated by the length of time typically required for AAR to become noticeable in concrete construction in the Pacific Northwest, commonly on such a scale that other deterioration mechanisms may have masked the effects of AAR. Distinguishing between the effects of AAR and those related to other problems in concrete is important for understanding the nature and severity of AAR throughout the Pacific Northwest. Furthermore, developing an understanding of the extent of the problem will assist efforts to maximize the intelligent and stewardly use of aggregate resources in the Pacific Northwest. This chapter illustrates the current 'state of the art' of AAR studies in the Pacific Northwest, a region with a common geologic heritage as well as many distinct geologic elements. The optimal use of aggregates in the construction of concrete structures that will achieve their design life is possible through an understanding of the engineering and geologic properties of these aggregates and of their geologic setting.

Bulletin↗
USGS2016

Potash—A vital agricultural nutrient sourced from geologic deposits

This report summarizes the primary sources of potash in the United States. Potash is an essential nutrient that, along with phosphorus and nitrogen, is used as fertilizer for growing crops. Plants require sufficient potash to activate enzymes, which in turn catalyze chemical reactions important for water uptake and photosynthesis. When potassium is available in quantities necessary for healthy plant growth, disease resistance and physical quality are improved and crop yield and shelf life are increased. Potash is a water-soluble compound of potassium formed by geologic and hydrologic processes. The principal potash sources discussed are the large, stratiform deposits that formed during retreat and evaporation of intracontinental seas. The Paradox, Delaware, Holbrook, Michigan, and Williston sedimentary basins in the United States are examples where extensive potash beds were deposited. Ancient marine-type potash deposits that are close to the surface can be mined using conventional underground mining methods. In situ solution mining can be used where beds are too deep, making underground mining cost-prohibitive, or where underground mines are converted to in situ solution mines. Quaternary brine is another source of potash that is recovered by solar evaporation in manmade ponds. Groundwater from Pleistocene Lake Bonneville (Wendover, Utah) and the present-day Great Salt Lake in Utah are sources of potashbearing brine. Brine from these sources pumped to solar ponds is evaporated and potash concentrated for harvesting, processing, and refinement. Although there is sufficient potash to meet near-term demand, the large marine-type deposits are either geographically restricted to a few areas or are too deep to easily mine. Other regions lack sources of potash brine from groundwater or surface water. Thus, some areas of the world rely heavily on potash imports. Political, economic, and global population pressures may limit the ability of some countries from securing potash resources in the future. In this context, a historical perspective on U.S. potash production in a global framework is discussed.

Open-File Report↗
USGS2017

USGS Spectral Library Version 7

We have assembled a library of spectra measured with laboratory, field, and airborne spectrometers. The instruments used cover wavelengths from the ultraviolet to the far infrared (0.2 to 200 microns [μm]). Laboratory samples of specific minerals, plants, chemical compounds, and manmade materials were measured. In many cases, samples were purified, so that unique spectral features of a material can be related to its chemical structure. These spectro-chemical links are important for interpreting remotely sensed data collected in the field or from an aircraft or spacecraft. This library also contains physically constructed as well as mathematically computed mixtures. Four different spectrometer types were used to measure spectra in the library: (1) Beckman™ 5270 covering the spectral range 0.2 to 3 µm, (2) standard, high resolution (hi-res), and high-resolution Next Generation (hi-resNG) models of Analytical Spectral Devices (ASD) field portable spectrometers covering the range from 0.35 to 2.5 µm, (3) Nicolet™ Fourier Transform Infra-Red (FTIR) interferometer spectrometers covering the range from about 1.12 to 216 µm, and (4) the NASA Airborne Visible/Infra-Red Imaging Spectrometer AVIRIS, covering the range 0.37 to 2.5 µm. Measurements of rocks, soils, and natural mixtures of minerals were made in laboratory and field settings. Spectra of plant components and vegetation plots, comprising many plant types and species with varying backgrounds, are also in this library. Measurements by airborne spectrometers are included for forested vegetation plots, in which the trees are too tall for measurement by a field spectrometer. This report describes the instruments used, the organization of materials into chapters, metadata descriptions of spectra and samples, and possible artifacts in the spectral measurements. To facilitate greater application of the spectra, the library has also been convolved to selected spectrometer and imaging spectrometers sampling and bandpasses, and resampled to selected broadband multispectral sensors. The native file format of the library is the SPECtrum Processing Routines (SPECPR) data format. This report describes how to access freely available software to read the SPECPR format. To facilitate broader access to the library, we produced generic formats of the spectra and metadata in text files. The library is provided on digital media and online at https://speclab.cr.usgs.gov/spectral-lib.html . A long-term archive of these data are stored on the USGS ScienceBase data server ( https://dx.doi.org/10.5066/F7RR1WDJ ).

Data Series↗
USGS2001

Characterization of surface-water quality based on real-time monitoring and regression analysis, Quivira National Wildlife Refuge, south-central Kansas, December 1998 through June 2001

Because of the considerable wildlife benefits offered by the Quivira National Wildlife Refuge in south-central Kansas, there is a desire to ensure suitable water quality. To assess the quality of water flowing from Rattlesnake Creek into the refuge, the U.S. Geological Survey collected periodic water samples from December 1998 through June 2001 and analyzed the samples for physical properties, dissolved solids, total suspended solids, suspended sediment, major ions, nutrients, metals, pesticides, and indicator bacteria. Concentrations of 10 of the 125 chemicals analyzed did not meet water-quality criteria to protect aquatic life and drinking water in a least one sample. These were pH, turbidity, dissolved oxygen, dissolved solids, sodium, chloride, phosphorus, total coliform bacteria, E. coli bacteria, and fecal coliform bacteria. No metal or pesticide concentrations exceeded water-quality criteria. Twenty-two of the 43 metals analyzed were not detected, and 36 of the 46 pesticides analyzed were not detected. Because dissolved solids, sodium, chloride, fecal coliform bacteria, and other chemicals that are a concern for the health and habitat of fish and wildlife at the refuge cannot be measured continuously, regression equations were developed from a comparison of the analytical results of periodic samples and in-stream monitor measurements of specific conductance, pH, water temperature, turbidity, and dissolved oxygen. A continuous record of estimated chemical concentrations was developed from continuously recorded in-stream measurements. Annual variation in water quality was evaluated by comparing 1999 and 2000 sample data- the 2 years for which complete data sets were available. Median concentrations of alkalinity, fluoride, nitrate, and fecal coliform bacteria were smaller or did not change from 1999 to 2000. Dissolved solids, total suspended solids, sodium, chloride, sulfate, total organic nitrogen, and total phosphorus had increases in median concentrations from 1999 to 2000. Increases in the median concentrations of the major ions were expected due to decreased rainfall in 2000 and very low streamflow late in the year. Increases for solids and nutrients may have been due to the unusually high streamflow in the early spring of 2000. This was the time of year when fields were tilled, exposing solids and nutrients that were transported with runoff to Rattlesnake Creek. Load estimates indicate the chemical mass transported into the refuge and can be used in the development of total maximum daily loads (as specified by the U.S. Environmental Protection Agency) for water-quality contaminants in Rattlesnake Creek. Load estimates also were used to evaluate seasonal variation in water quality. Seasonal variation was most pronounced in the estimates of nutrient loads, and most of the nutrient load transported to the refuge occurred during just a few periods of surface runoff in the spring and summer. This information may be used by resource managers to determine when water-diversion strategies would be most beneficial. Load estimates also were used to calculate yields, which are useful for site comparisons. The continuous and real-time nature of the record of estimated concentrations, loads, and yields may be important for resource managers, recreationalists, or others for evaluating water-diversion strategies, making water-use decisions, or assessing the environmental effects of chemicals in time to prevent adverse effects on fish or other aquatic life at the refuge.

Kansas↗
USGS1987

UTILIZATION OF GEOGRAPHIC INFORMATION SYSTEMS TECHNOLOGY IN THE ASSESSMENT OF REGIONAL GROUND-WATER QUALITY.

The U. S. Geological Survey (USGS) in cooperation with the U. S. Environmental Protection Agency Office of Pesticide Programs and several State agencies in Oregon has prepared a digital spatial database at 1:500,000 scale to be used as a basis for evaluating the potential for ground-water contamination by pesticides and other agricultural chemicals. Geographic information system (GIS) software was used to assemble, analyze, and manage spatial and tabular environmental data in support of this project. Physical processes were interpreted relative to published spatial data and an integrated database to support the appraisal of regional ground-water contamination was constructed. Ground-water sampling results were reviewed relative to the environmental factors present in several agricultural areas to develop an empirical knowledge base which could be used to assist in the selection of future sampling or study areas.

Conference Paper↗
USGS2000

Hydrogeologic setting and potential for denitrification in ground water, Coastal Plain of southern Maryland

The types and distribution of Coastal Plain sediments in the Patuxent River Basin may contribute to relatively low concentrations of nitrate (typically less than 1 milligram per liter) in stream base flow because of the chemical reduction of dissolved nitrate (denitrification) in ground water. Water chemistry data from synoptic stream base-flow surveys in the Patuxent River Basin show higher dissolved nitrate concentrations in the Piedmont than in the Coastal Plain section of the watershed. Stream base flow reflects closely the chemistry of ground water discharging from the surficial (unconfined) aquifer to the stream. Because land use in the sampled subbasins is virtually the same in each section, differences in the physical and geochemical characteristics of the surficial aquifer may explain the observed differences in water chemistry. One possible cause of lower nitrate concentrations in the Coastal Plain is denitrification within marine sediments that contain chemically reduced compounds. During denitrification, the oxygen atoms on the nitrate (N0 3 -) molecule are transferred to a reduced compound and N gas is produced. Organic carbon and ferrous iron (Fe 2+ ), derived from the dissolution of minerals such as pyrite (FeS 2 ) and glauconite (an iron aluminosilicate clay), can act as reducing substrates; these reduced chemical species are common in the marine and estuarine deposits in Southern Maryland. The spatial distribution of geologic units and their lithology (sediment type) has been used to create a map of the potential for denitrification of ground water in the surficial aquifer of the Coastal Plain in Southern Maryland.

Maryland↗
USGS2006

Evaluating the relative contributions of hydroperiod and soil fertility on growth of south Florida mangroves

Low and high water periods create contrasting challenges for trees inhabiting periodically flooded wetlands. Low to moderate flood durations and frequencies may bring nutrient subsidies, while greater hydroperiods can be energetically stressful because of oxygen deficiency. We tested the hypothesis that hydroperiod affects the growth of mangrove seedlings and saplings in a greenhouse experiment by varying flood duration while keeping salinity and soil fertility constant. We measured the growth of mangrove trees along a hydroperiod gradient over a two-year period by tracking fine-scale diameter increment. Greenhouse growth studies indicated that under a full range of annual flood durations (0-8760 h/year), hydroperiod alone exerted a significant influence on growth for one species, Laguncularia racemosa, when flooding was imposed for two growing seasons. Field evaluations, on the other hand, indicated that increased flood duration may provide nutrient subsidies for tree growth. Diameter growth was related curvilinearly to site hydroperiod, including flood duration and frequency, as well as to salinity and soil fertility. An analysis of soil physico-chemical parameters suggests that phosphorus fertility, which was also linked directly to hydroperiod, is likely to influence growth on south Florida mangrove sites. The physical removal of phosphorus by greater flood frequencies from upland sources and/or addition of phosphorus from tidal flooding balanced against increased soil aeration and reduced water deficits may be an extremely important growth determinant for south Florida mangroves. ?? Springer 2006.

Hydrobiologia↗
USGS2019

Lakes as paleoseismic records in a seismically-active, low-relief area (Rieti Basin, central Italy)

Small lakes in low relief areas are atypical candidates for studies on paleoseismicity, but their sediments can contain seismically induced event layers (seismites) generated through strong ground shaking, sediment transport, hydrological reorganization and/or changes in groundwater chemistry and flow. Lakes Lungo and Ripasottile are shallow lakes (<10m deep) located in the tectonically active Rieti Basin in the central Apennines, Italy, where strong normal faulting earthquakes (Mw 6.5 to 7.0) regularly occur. Sediment cores from these lakes provide paleoseismic indicators for the past ~1000 years. Sedimentological and geochemical analysis reveals four event layers identified in both lakes that correspond with documented large-scale earthquakes in 1298, 1349, 1639, and 1703 AD. Chronological correlation between earthquakes and possible seismites is reliable because of the unusually high resolution of sediment dating available for the studied cores. The common physical structure is a physically homogenous bed (homogenite) of re-suspended sediment consisting of a denser, high magnetic susceptibility (MS) clastic base, with organic matter concentrated above. Chemical signatures are associated with some event layers and may represent abrupt or transient shifts to a groundwater-dominated system, or permanent changes in groundwater flow and/or spring discharge. Excursions in δ13Corg may represent disruptions or changes in carbon source. Not all event layers show the same features, a result attributed to differences in seismic processes as well as the lake attributes, and anthropogenic modification. The observations made here may provide a new means of detecting paleoseismicity and may be applied to other low relief lakes in seismically active areas.

Rieti Basin↗
USGS2002

Vapor-liquid phase equilibria of potassium chloride-water mixtures: Equation-of-state representation for KCl-H2O and NaCl-H2O

Measurements of isothermal vapor-liquid compositions for KCl-H2O as a function of pressure are reported. An equation of state, which was originally proposed by Pitzer and was improved and used by Tanger and Pitzer to fit the vapor-liquid coexistence surface for NaCl-H2O, has been used for representation of the KCl-H2O system from 300 to 410??C. Improved parameters are also reported for NaCl-H2O from 300 to 500??C. ?? 1990 American Chemical Society.

Journal of Physical Chemistry↗
USGS2015

Fecal indicator organism modeling and microbial source tracking in environmental waters: Chapter 3.4.6

Mathematical models have been widely applied to surface waters to estimate rates of settling, resuspension, flow, dispersion, and advection in order to calculate movement of particles that influence water quality. Of particular interest are the movement, survival, and persistence of microbial pathogens or their surrogates, which may contaminate recreational water, drinking water, or shellfish. Most models devoted to microbial water quality have been focused on fecal indicator organisms (FIO), which act as a surrogate for pathogens and viruses. Process-based modeling and statistical modeling have been used to track contamination events to source and to predict future events. The use of these two types of models require different levels of expertise and input; process-based models rely on theoretical physical constructs to explain present conditions and biological distribution while data-based, statistical models use extant paired data to do the same. The selection of the appropriate model and interpretation of results is critical to proper use of these tools in microbial source tracking. Integration of the modeling approaches could provide insight for tracking and predicting contamination events in real time. A review of modeling efforts reveals that process-based modeling has great promise for microbial source tracking efforts; further, combining the understanding of physical processes influencing FIO contamination developed with process-based models and molecular characterization of the population by gene-based (i.e., biological) or chemical markers may be an effective approach for locating sources and remediating contamination in order to protect human health better.

Book chapter↗
USGS2012

USGS Environmental health science strategy: providing environmental health science for a changing world: Public review release

America has an abundance of natural resources. We have bountiful clean water, fertile soil, and unrivaled national parks, wildlife refuges, and public lands. These resources enrich our lives and preserve our health and wellbeing. These resources have been maintained because of our history of respect for their value and an enduring commitment to their vigilant protection. Awareness of the social, economic, and personal value of the health of our environment is increasing. The emergence of environmentally driven diseases caused by environmental exposure to contaminants and pathogens is a growing concern worldwide. New health threats and patterns of established threats are affected by both natural and anthropogenic changes to the environment. Human activities are key drivers of emerging (new and re-emerging) health threats. Societal demands for land and natural resources, a better quality of life, improved economic prosperity, and the environmental impacts associated with these demands will continue to increase. Natural earth processes, climate trends, and related climatic events will add to the environmental impact of human activities. These environmental drivers will influence exposure to disease agents, including viral, bacterial, prion, and fungal pathogens, parasites, natural earth materials, toxins and other biogenic compounds, and synthetic chemicals and substances. The U.S. Geological Survey (USGS) defines environmental health science broadly as the interdisciplinary study of relations among the quality of the physical environment, the health of the living environment, and human health. The interactions among these three spheres are driven by human activities, ecological processes, and natural earth processes; the interactions affect exposure to contaminants and pathogens and the severity of environmentally driven diseases in animals and people. This definition provides USGS with a framework for synthesizing natural science information from across the Bureau and providing it to environmental, natural resource, agricultural, and public-health managers. The USGS is a Federal science agency with a broad range of natural science expertise relevant to environmental health. USGS provides scientific information and tools as a scientific basis for management and policy decision making. USGS specializes in science at the environment-health interface, by characterizing the processes that affect the interaction among the physical environment, the living environment, and people, and the resulting factors that affect ecological and human exposure to disease agents. This report describes a 10-year strategy that encompasses the portfolio of USGS environmental health science. It summarizes national environmental health priorities that USGS is best suited to address, and will serve as a strategic framework for USGS environmental health science goals, actions, and outcomes for the next decade. Implementation of this strategy is intended to aid coordination of USGS environmental health activities and to provide a focal point for disseminating information to stakeholders. The "One Health" paradigm advocated by the World Health Organization (WHO, 2011), and the American Veterinary Medicine Association (AVMA, 2008), among others, is based on a general recognition that the health of humans, animals, and the environment are inextricably linked. Thus, successful efforts to protect that health will require increased interdisciplinary research and increased communication and collaboration among the broader scientific and health community. This strategy is built upon that paradigm. The vision, mission, and five cornerstone goals of the USGS Environmental Health Science Strategy were developed with significant input from a wide range of stakeholders. Vision - The USGS is a premier source of the environmental health science needed to safeguard the health of the environment, fish, wildlife, and people. Mission - The mission of USGS in environmental health science is to contribute scientific information to environmental, natural resource, agricultural, and public-health managers, who use that science to support sound decision making. USGS provides the science to: - Goal 1: Identify, prioritize, and detect contaminants and pathogens of emerging environmental concern. - Goal 2: Reduce the impact of contaminants on the environment, fish, wildlife, and people. - Goal 3: Reduce the impact of pathogens on the environment, fish, wildlife, and people. - Goal 4: Discover the complex interactions and combined effects of exposure to contaminants and pathogens. - Goal 5: Prepare for and respond to environmental impacts and related health threats of natural and anthropogenic disasters. Goals 1 through 4 are intended to provide science to address environmental health threats in a logical order, from informing prevention and preparedness, to supporting systematic management response to environmental health issues. Goal 4 addresses the interaction among contaminants and pathogens, an issue of emerging concern in environmental health science. Goal 5 acknowledges the fact that natural and anthropogenic disasters can cause immediate and prolonged adverse environmental health threats. This strategy proposes that USGS take the following strategic science actions to achieve each of the five goals of this strategy: Goal 1: Identify, prioritize, and detect contaminants and pathogens of emerging environmental concern. - Strategic Science Action 1. - Prioritize contaminants and pathogens of emerging concern to guide research, detection, and management activities. - Strategic Science Action 2. - Conduct surveillance and monitoring to provide early warning of emerging health threats. - Strategic Science Action 3. - Develop approaches and tools that identify vulnerable environmental settings, ecosystems, and species. Goal 2: Reduce the impact of contaminants on the environment, fish, wildlife, and people. - Strategic Science Action 1. - Systematically characterize the sources, occurrence, transport and fate of environmental contaminants to guide efforts to manage and mitigate contamination. - Strategic Science Action 2. - Evaluate the threats of contamination on the health of the environment, fish, wildlife, and people, and inform the associated management and protection efforts. - Strategic Science Action 3. - Characterize potential human exposure to support establishment of health-based standards or guidelines and contamination-reduction efforts. Goal 3: Reduce the impact of pathogens on the environment, fish, wildlife, and people. - Strategic Science Action 1. - Determine the biotic and abiotic factors that control the ecology of infectious diseases affecting natural populations of aquatic and terrestrial species and potential transmission to other animals and humans. - Strategic Science Action 2. - Establish how natural and anthropogenic environmental changes affect the distribution and severity of infectious diseases in natural populations of aquatic and terrestrial species and potential transmission to other animals and humans. - Strategic Science Action 3. - Develop surveillance systems to identify changing patterns of disease activity in priority geographic areas. Goal 4: Discover the complex interactions and combined effects of exposure to contaminants and pathogens. - Strategic Science Action 1. - Identify how exposure to one class of disease agents (contaminants or pathogens) can make an organism more susceptible to effects from exposure to the other class of disease agents. - Strategic Science Action 2. - Implement interdisciplinary studies that characterize the effects of combined exposure to pathogens and contaminants. Goal 5: Prepare for and respond to the environmental impacts and related health threats of natural and anthropogenic disasters. - Strategic Science Action 1. - Establish a formal interdisciplinary science capability to rapidly assess the environmental health risks associated with disasters. - Strategic Science Action 2. - Enhance methods to anticipate, prepare for, and identify environmental, ecological, and related health impacts of future disasters. This strategy is one of seven USGS science strategies developed concurrently: - Climate and Land Use Change - Core Science Systems - Ecosystems - Energy and Mineral Resources - Environmental Health - Natural Hazards - Water. This strategy describes how USGS will address the highest priority environmental health issues facing the Nation. The ultimate intended outcome of this science strategy is prevention and reduction of adverse impacts to the quality of the environment, the health of our living resources, and human health. Communication with, and receiving input from, partners and stakeholders regarding their science needs is essential for successful implementation of this strategy. It is incumbent on USGS to reach out to all stakeholders to ensure that USGS efforts are focused on the highest priority environmental health issues and that products are provided in the most timely and usable form to all those who can use them. USGS must reach out to the scientific community, internally and externally, to ensure that our efforts are integrated with and take full advantage of the activities of others.

Open-File Report↗
USGS1994

Hydrologic data for northern Bucks County, Pennsylvania

Hydrologic and water-quality data were collected in northern Bucks County, Pa., as part of a study conducted by the U.S. Geological Survey, in cooperation with Bridgeton, Buckingham, Nockamixon, Plumstead, Solebury, Springfield, Tinicum, and Wrightstown Townships and New Hope Borough. Hydrologic data on ground water and surface water were collected to provide basic information on the quality and quantity of water resources in northern Bucks County. Ground-water data include descriptions of 1,357 wells and water levels for 28 observation wells measured during 1990-93. Ground-water-quality analyses for 117 wells include physical properties and concentrations of major ions, nutrients, selected metals and other trace constituents, radon, and volatile organic compounds. Surface-water data include chemical analyses of water samples collected at sites on Beaver Creek, Crooks Creek, Geddes Run, Little Tinicum Creek, Paunnacussing Creek, Pidcock Creek, Rapp Creek, Smithtown Creek, and Tinicum Creek.

Open-File Report↗
USGS2004

Water Resources Data, New Jersey, Water Year 2003; Volume 3. Water-Quality Data

Water-resources data for the 2003 water year for New Jersey are presented in three volumes, and consists of records of stage, discharge, and water-quality of streams; stage and contents of lakes and reservoirs; and water levels and water-quality of ground water. Volume 3 contains a summary of surface- and ground-water hydrologic conditions for the 2003 water year, a listing of current water-resources projects in New Jersey, a bibliography of water-related reports, articles, and fact sheets for New Jersey completed by the Geological Survey in recent years, water-quality records of chemical analyses from 123 continuing-record surface-water stations, 35 ground-water sites, records of daily statistics of temperature and other physical measurements from 20 continuous-recording stations, and 5 special-study sites consisting of 2 surface-water sites, 1 spring site, and 240 groundwater sites. Locations of water-quality stations are shown in figures 21-25. Locations of special-study sites are shown in figures 49-53. These data represent that part of the National Water Data System operated by the U.S. Geological Survey and cooperating federal, state, and local agencies in New Jersey.

Water Data Report↗