SEARCH · USGS Science

Results for “Algorithms”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources

USGS2023

Annual and inter-annual variability in the diffuse attenuation coefficient and turbidity in an urbanized Washington lake from 2013 to 2022 assessed using Landsat-8/9

Water clarity, defined in this study using measurements of the downwelling diffuse light attenuation coefficient (K d ) and turbidity, is an important indicator of lake trophic status and ecosystem health. We used in-situ measurements to evaluate existing semi-analytical models for K d and turbidity, developed a regional turbidity model based on spectral shape, and evaluated the spatial and temporal trends in Lake Washington from 2013 to 2022 using Landsat-8/9 Operational Land Imager (OLI). We found no significant trends from 2013 to 2022 in K d or turbidity when both the annual and full datasets were considered. In addition to the spring peak lasting from April through June, autumn K d peaks were present at all sites, a pattern consistent with seasonal chlorophyll a and zooplankton concentrations. There existed no autumn peak in the monthly turbidity dataset, and the spring peak occurred two months before the K d peak, nearly mirroring seasonal variability in the Cedar River discharge rates over the same period. The K d and turbidity algorithms were thus each more sensitive to different sources of water clarity variability in Lake Washington.

Washington↗

USGS2024

A "Region-Specific Model Adaptation (RSMA)" based training data method in large-scale land cover mapping

An accurate and historical land cover monitoring dataset for Alaska could provide fundamental information for a range of studies, such as conservation habitats, biogeochemical cycles, and climate systems, in this distinctive region. This research addresses challenges associated with the extraction of training data for timely and accurate land cover classifications in Alaska over longer time periods (e.g., greater than 10 years). Specifically, we designed the “Region-Specific Model Adaptation (RSMA)” method for training data. The method integrates land cover information from the National Land Cover Database (NLCD), LANDFIRE’s Existing Vegetation Type (EVT), and the National Wetlands Inventory (NWI) and machine learning techniques to generate robust training samples based on the Anderson Level II classification legend. The assumption of the method is that spectral signatures vary across regions because of diverse land surface compositions; however, despite these variations, there are consistent, collective land cover characteristics that span the entire region. Building upon this assumption, this research utilized the classification power of deep learning algorithms and the generalization ability of RSMA to construct a model for the RSMA method. Additionally, we interpreted existing vegetation plot information for land cover labels as validation data to reduce inconsistency in the human interpretation. Our validation results indicate that the RSMA method improved the quality of the training data derived solely from the NLCD by approximately 30% for the overall accuracy. The validation assessment also demonstrates that the RSMA method can generate reliable training data on large scales in regions that lack sufficient reliable data.

Remote Sensing↗

USGS2024

Mapping river flow from thermal images in approximately real time: Proof of concept on the Sacramento River, California, USA

Image velocimetry has become an effective method of mapping flow conditions in rivers, but this analysis is typically performed in a post-processing mode after data collection is complete. In this study, we evaluated the potential to infer flow velocities in approximately real time as thermal images are being acquired from an uncrewed aircraft system (UAS). The sensitivity of thermal image velocimetry to environmental conditions was quantified by conducting 20 flights over four days and assessing the accuracy of image-derived velocity estimates via comparison to direct field measurements made with an acoustic Doppler current profiler (ADCP). This analysis indicated that velocity mapping was most reliable when the air was cooler than the water. We also introduced a workflow for River Velocity Measurement in Approximately Real Time (RiVMART) that involved transferring brief image sequences from the UAS to a ground station as distinct data packets. The resulting velocity fields were as accurate as those generated via post-processing. A new particle image velocimetry (PIV) algorithm based on staggered image sequences increased the number of image pairs available for a given image sequence duration and slightly improved accuracy relative to a standard PIV implementation. Direct, automated geo-referencing of image-derived velocity vectors based on information on the position and orientation of the UAS acquired during flight led to poor alignment with vectors that were geo-referenced manually by selecting ground control points from an orthophoto. This initial proof-of-concept investigation suggests that our workflow could enable highly efficient characterization of flow fields in rivers and might help support applications that require rapid response to changing conditions.

California↗

USGS2025

Understanding the influence of image enhancement on underwater object detection: A quantitative and qualitative study

Underwater image enhancement is often perceived as a disadvantageous process to object detection. We propose a novel analysis of the interactions between enhancement and detection, elaborating on the potential of enhancement to improve detection. In particular, we evaluate object detection performance for each individual image rather than across the entire set to allow a direct performance comparison of each image before and after enhancement. This approach enables the generation of unique queries to identify the outperforming and underperforming enhanced images compared to the original images. To accomplish this, we first produce enhanced image sets of the original images using recent image enhancement models. Each enhanced set is then divided into two groups: (1) images that outperform or match the performance of the original images and (2) images that underperform. Subsequently, we create mixed original-enhanced sets by replacing underperforming enhanced images with their corresponding original images. Next, we conduct a detailed analysis by evaluating all generated groups for quality and detection performance attributes. Finally, we perform an overlap analysis between the generated enhanced sets to identify cases where the enhanced images of different enhancement algorithms unanimously outperform, equally perform, or underperform the original images. Our analysis reveals that, when evaluated individually, most enhanced images achieve equal or superior performance compared to their original counterparts. The proposed method uncovers variations in detection performance that are not apparent in a whole set as opposed to a per-image evaluation because the latter reveals that only a small percentage of enhanced images cause an overall negative impact on detection. We also find that over-enhancement may lead to deteriorated object detection performance. Lastly, we note that enhanced images reveal hidden objects that were not annotated due to the low visibility of the original images.

Remote Sensing↗

USGS2010

Phenological classification of the United States: A geographic framework for extending multi-sensor time-series data

This study introduces a new geographic framework, phenological classification, for the conterminous United States based on Moderate Resolution Imaging Spectroradiometer (MODIS) Normalized Difference Vegetation Index (NDVI) time-series data and a digital elevation model. The resulting pheno-class map is comprised of 40 pheno-classes, each having unique phenological and topographic characteristics. Cross-comparison of the pheno-classes with the 2001 National Land Cover Database indicates that the new map contains additional phenological and climate information. The pheno-class framework may be a suitable basis for the development of an Advanced Very High Resolution Radiometer (AVHRR)-MODIS NDVI translation algorithm and for various biogeographic studies.

Remote Sensing↗

USGS2014

High spatial resolution WorldView-2 imagery for mapping NDVI and its relationship to temporal urban landscape evapotranspiration factors

Evapotranspiration estimation has benefitted from recent advances in remote sensing and GIS techniques particularly in agricultural applications rather than urban environments. This paper explores the relationship between urban vegetation evapotranspiration (ET) and vegetation indices derived from newly-developed high spatial resolution WorldView-2 imagery. The study site was Veale Gardens in Adelaide, Australia. Image processing was applied on five images captured from February 2012 to February 2013 using ERDAS Imagine. From 64 possible two band combinations of WorldView-2, the most reliable one (with the maximum median differences) was selected. Normalized Difference Vegetation Index (NDVI) values were derived for each category of landscape cover, namely trees, shrubs, turf grasses, impervious pavements, and water bodies. Urban landscape evapotranspiration rates for Veale Gardens were estimated through field monitoring using observational-based landscape coefficients. The relationships between remotely sensed NDVIs for the entire Veale Gardens and for individual NDVIs of different vegetation covers were compared with field measured urban landscape evapotranspiration rates. The water stress conditions experienced in January 2013 decreased the correlation between ET and NDVI with the highest relationship of ET-Landscape NDVI (Landscape Normalized Difference Vegetation Index) for shrubs (r 2 = 0.66) and trees (r 2 = 0.63). However, when the January data was excluded, there was a significant correlation between ET and NDVI. The highest correlation for ET-Landscape NDVI was found for the entire Veale Gardens regardless of vegetation type (r 2 = 0.95, p > 0.05) and the lowest one was for turf (r 2 = 0.88, p > 0.05). In support of the feasibility of ET estimation by WV2 over a longer period, an algorithm recently developed that estimates evapotranspiration rates based on the Enhanced Vegetation Index (EVI) from MODIS was employed. The results revealed a significant positive relationship between ETMODIS and ETWV2 (r 2 = 0.9857, p > 0.05). This indicates that the relationship between NDVI using high resolution WorldView-2 imagery and ground-based validation approaches could provide an effective predictive tool for determining ET rates from unstressed mixed urban landscape plantings.

Adelaide↗

USGS2015

An automated approach for mapping persistent ice and snow cover over high latitude regions

We developed an automated approach for mapping persistent ice and snow cover (glaciers and perennial snowfields) from Landsat TM and ETM+ data across a variety of topography, glacier types, and climatic conditions at high latitudes (above ~65°N). Our approach exploits all available Landsat scenes acquired during the late summer (1 August–15 September) over a multi-year period and employs an automated cloud masking algorithm optimized for snow and ice covered mountainous environments. Pixels from individual Landsat scenes were classified as snow/ice covered or snow/ice free based on the Normalized Difference Snow Index (NDSI), and pixels consistently identified as snow/ice covered over a five-year period were classified as persistent ice and snow cover. The same NDSI and ratio of snow/ice-covered days to total days thresholds applied consistently across eight study regions resulted in persistent ice and snow cover maps that agreed closely in most areas with glacier area mapped for the Randolph Glacier Inventory (RGI), with a mean accuracy (agreement with the RGI) of 0.96, a mean precision (user’s accuracy of the snow/ice cover class) of 0.92, a mean recall (producer’s accuracy of the snow/ice cover class) of 0.86, and a mean F-score (a measure that considers both precision and recall) of 0.88. We also compared results from our approach to glacier area mapped from high spatial resolution imagery at four study regions and found similar results. Accuracy was lowest in regions with substantial areas of debris-covered glacier ice, suggesting that manual editing would still be required in these regions to achieve reasonable results. The similarity of our results to those from the RGI as well as glacier area mapped from high spatial resolution imagery suggests it should be possible to apply this approach across large regions to produce updated 30-m resolution maps of persistent ice and snow cover. In the short term, automated PISC maps can be used to rapidly identify areas where substantial changes in glacier area have occurred since the most recent conventional glacier inventories, highlighting areas where updated inventories are most urgently needed. From a longer term perspective, the automated production of PISC maps represents an important step toward fully automated glacier extent monitoring using Landsat or similar sensors.

Remote Sensing↗

USGS2016

Mapping annual forest cover in sub-humid and semi-arid regions through analysis of landsat and PALSAR imagery

Accurately mapping the spatial distribution of forests in sub-humid to semi-arid regions over years is a challenging task and causes difficulty to forest management. Relatively large uncertainties still exist in the spatial distribution of forests and deforestation in the sub-humid and semi-arid regions. Numerous publications have used either optical or synthetic aperture radar (SAR) remote sensing imagery, but the resultant forest cover maps often have large errors. In this study, we proposed a pixel- and rule-based algorithm to identify and map annual forests from 2007 to 2010 in Oklahoma, USA, a transition region with various climate and landscapes, using the integration of the L-band ALOS PALSAR Fine Beam Dual Polarization (FBD) mosaic dataset and Landsat images. The overall accuracy and Kappa coefficient of the PALSAR/Landsat forest map were about 88.2% and 0.75 in 2010, with the user and producer accuracy about 93.4% and 75.7%, based on the 3,270 random ground plots collected in 2012 and 2013. Compared with the forest products from JAXA, NLCD, OKESM and OKFRA, the PALSAR/Landsat forest map showed great improvement. The area of the PALSAR/Landsat forest was about 40,149 km2 in 2010, which was close to the area from OKFRA (40,468 km2), but much larger than those from JAXA (32,403 km2) and NLCD (37,628 km2). We analyzed annual forest cover dynamics, and the results show extensive deforestation (2,761 km2, 6.9% of the total forest area in 2010) and reforestation (3,630 km2, 9.0%) in the southeast and central Oklahoma, and the total area of forests increased by 684 km2 from 2007 to 2010. This study clearly demonstrates the potential of data fusion between PALSAR and Landsat images for mapping annual forest cover dynamics in sub-humid to semi-arid regions, and the resultant forest maps would be helpful to forest management.

Oklahoma↗

USGS2017

Evaluation of the U.S. Geological Survey Landsat burned area essential climate variable across the conterminous U.S. using commercial high-resolution imagery

The U.S. Geological Survey has produced the Landsat Burned Area Essential Climate Variable (BAECV) product for the conterminous United States (CONUS), which provides wall-to-wall annual maps of burned area at 30 m resolution (1984–2015). Validation is a critical component in the generation of such remotely sensed products. Previous efforts to validate the BAECV relied on a reference dataset derived from Landsat, which was effective in evaluating the product across its timespan but did not allow for consideration of inaccuracies imposed by the Landsat sensor itself. In this effort, the BAECV was validated using 286 high-resolution images, collected from GeoEye-1, QuickBird-2, Worldview-2 and RapidEye satellites. A disproportionate sampling strategy was utilized to ensure enough burned area pixels were collected. Errors of omission and commission for burned area averaged 22 ± 4% and 48 ± 3%, respectively, across CONUS. Errors were lowest across the western U.S. The elevated error of commission relative to omission was largely driven by patterns in the Great Plains which saw low errors of omission (13 ± 13%) but high errors of commission (70 ± 5%) and potentially a region-growing function included in the BAECV algorithm. While the BAECV reliably detected agricultural fires in the Great Plains, it frequently mapped tilled areas or areas with low vegetation as burned. Landscape metrics were calculated for individual fire events to assess the influence of image resolution (2 m, 30 m and 500 m) on mapping fire heterogeneity. As the spatial detail of imagery increased, fire events were mapped in a patchier manner with greater patch and edge densities, and shape complexity, which can influence estimates of total greenhouse gas emissions and rates of vegetation recovery. The increasing number of satellites collecting high-resolution imagery and rapid improvements in the frequency with which imagery is being collected means greater opportunities to utilize these sources of imagery for Landsat product validation.

Remote Sensing↗

USGS2007

A coupled remote sensing and simplified surface energy balance approach to estimate actual evapotranspiration from irrigated fields

Accurate crop performance monitoring and production estimation are critical for timely assessment of the food balance of several countries in the world. Since 2001, the Famine Early Warning Systems Network (FEWS NET) has been monitoring crop performance and relative production using satellite-derived data and simulation models in Africa, Central America, and Afghanistan where ground-based monitoring is limited because of a scarcity of weather stations. The commonly used crop monitoring models are based on a crop water-balance algorithm with inputs from satellite-derived rainfall estimates. These models are useful to monitor rainfed agriculture, but they are ineffective for irrigated areas. This study focused on Afghanistan, where over 80 percent of agricultural production comes from irrigated lands. We developed and implemented a Simplified Surface Energy Balance (SSEB) model to monitor and assess the performance of irrigated agriculture in Afghanistan using a combination of 1-km thermal data and 250m Normalized Difference Vegetation Index (NDVI) data, both from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor. We estimated seasonal actual evapotranspiration (ETa) over a period of six years (2000-2005) for two major irrigated river basins in Afghanistan, the Kabul and the Helmand, by analyzing up to 19 cloud-free thermal and NDVI images from each year. These seasonal ETa estimates were used as relative indicators of year-to-year production magnitude differences. The temporal water-use pattern of the two irrigated basins was indicative of the cropping patterns specific to each region. Our results were comparable to field reports and to estimates based on watershed-wide crop water-balance model results. For example, both methods found that the 2003 seasonal ETa was the highest of all six years. The method also captured water management scenarios where a unique year-to-year variability was identified in addition to water-use differences between upstream and downstream basins. A major advantage of the energy-balance approach is that it can be used to quantify spatial extent of irrigated fields and their water-use dynamics without reference to source of water as opposed to a water-balance model which requires knowledge of both the magnitude and temporal distribution of rainfall and irrigation applied to fields. ?? 2007 by MDPI.

Sensors↗

USGS2022

Test of a screw-style fish lift for introducing migratory fish into a selective fish passage device

Barriers are an effective mechanism for managing invasive species like sea lamprey in the Lau-rentian Great Lakes, but are detrimental because they limit the migration of desirable, native species. Fish passage technologies that selectively pass desirable species while blocking unde-sirable species are needed. Optical sorting tools combined with newly developed computer learning algorithms could be used to identify invasive species from high resolution imagery and potentially isolate them from an assortment of Great Lakes fishes. Many existing barriers lack fishways and optical sorting may require fish to be dewatered for image capture. The Archimedes screw, a device originating from 234 BC, offers the potential to continuously lift fish and water over low-head barriers or into an optical sorting device. To test the efficacy of an Archimedes screw fish lift to capture and pass Great Lakes fishes, we built a field-scale prototype and installed it at the Cheboygan Dam, Michigan USA in 2021. The fish lift safely transported 704 fish (688 of which were suckers) in 11 days. Passage of suckers through the fish lift increased with water temperature and attraction flow. There were no observed injuries in transported fish or mortalities in a subset of suckers held post-transport.

Michigan↗

USGS2024

Reach-scale mapping of surface flow velocities from thermal images acquired by an uncrewed aircraft system along the Sacramento River, California, USA

An innovative payload containing a sensitive mid-wave infrared camera was flown on an uncrewed aircraft system (UAS) to acquire thermal imagery along a reach of the Sacramento River, California, USA. The imagery was used as input for an ensemble particle image velocimetry (PIV) algorithm to produce near-continuous maps of surface flow velocity along a reach approximately 1 km in length. To assess the accuracy of PIV velocity estimates, in situ measurements of flow velocity were obtained with an acoustic Doppler current profiler (ADCP). ADCP measurements were collected along pre-planned cross-section lines within the area covered by the imagery. The PIV velocities showed good agreement with the depth-averaged velocity measured by the ADCP, with R 2 ">

Water↗

USGS2015

Comparison of four different energy balance models for estimating evapotranspiration in the Midwestern United States

The development of different energy balance models has allowed users to choose a model based on its suitability in a region. We compared four commonly used models—Mapping EvapoTranspiration at high Resolution with Internalized Calibration (METRIC) model, Surface Energy Balance Algorithm for Land (SEBAL) model, Surface Energy Balance System (SEBS) model, and the Operational Simplified Surface Energy Balance (SSEBop) model—using Landsat images to estimate evapotranspiration (ET) in the Midwestern United States. Our models validation using three AmeriFlux cropland sites at Mead, Nebraska, showed that all four models captured the spatial and temporal variation of ET reasonably well with an R 2 of more than 0.81. Both the METRIC and SSEBop models showed a low root mean square error (<0.93 mm·day −1 ) and a high Nash–Sutcliffe coefficient of efficiency (>0.80), whereas the SEBAL and SEBS models resulted in relatively higher bias for estimating daily ET. The empirical equation of daily average net radiation used in the SEBAL and SEBS models for upscaling instantaneous ET to daily ET resulted in underestimation of daily ET, particularly when the daily average net radiation was more than 100 W·m −2 . Estimated daily ET for both cropland and grassland had some degree of linearity with METRIC, SEBAL, and SEBS, but linearity was stronger for evaporative fraction. Thus, these ET models have strengths and limitations for applications in water resource management.

Nebraska↗

USGS2022

Integration of vegetation classification with land cover mapping: Lessons from regional mapping efforts in the Americas

Aims : Natural resource management and biodiversity conservation rely on inventories of vegetation that span multiple management or political jurisdictions. However, while remote sensing data and analytical tools have enabled production of maps at increasing spatial resolution and reliability, there are limited examples where national or continental-scaled maps are produced to represent vegetation at high thematic detail. We illustrate two examples that have bridged the gap between traditional land cover mapping and modern vegetation classification. Study area : Our two case studies include national ( USA ) and continental (North and South America) vegetation and land cover mapping. These studies span conditions from subpolar to tropical latitudes of the Americas. Methods : Both case studies used a supervised modeling approach with the International Vegetation Classification ( IVC ) to produce maps that provide for greater thematic detail. Georeferenced locations for these vegetation types are used by machine learning algorithms to train a predictive model and generate a distribution map. Results : The USA LANDFIRE (Landscape Fire and Resource Management Planning Tools Project) case study illustrates how a history of vegetation-based classification and availability of key inputs can come together to generate standard map products covering more than 9.8 million km 2 that are unsurpassed anywhere in the world in terms of spatial and thematic resolution. That being said, it also remains clear that mapping at the thematic resolution of the IVC Group and finer resolution require very large and spatially balanced inputs of georeferenced samples. Even with extensive prior data collection efforts, these remain a key limitation. The NatureServe effort for the Americas - encompassing 22% of the global land surface - demonstrates methods and outputs suitable for worldwide application at continental scales. Conclusions : Continued collection of input data used in the case studies could enable mapping at these spatial and thematic resolutions around the globe.

Vegetation Classification and Survey↗

USGS2014

Assessing effects of variation in global climate data sets on spatial predictions from climate envelope models

Climate change poses new challenges for natural resource managers. Predictive modeling of species–environment relationships using climate envelope models can enhance our understanding of climate change effects on biodiversity, assist in assessment of invasion risk by exotic organisms, and inform life-history understanding of individual species. While increasing interest has focused on the role of uncertainty in future conditions on model predictions, models also may be sensitive to the initial conditions on which they are trained. Although climate envelope models are usually trained using data on contemporary climate, we lack systematic comparisons of model performance and predictions across alternative climate data sets available for model training. Here, we seek to fill that gap by comparing variability in predictions between two contemporary climate data sets to variability in spatial predictions among three alternative projections of future climate. Overall, correlations between monthly temperature and precipitation variables were very high for both contemporary and future data. Model performance varied across algorithms, but not between two alternative contemporary climate data sets. Spatial predictions varied more among alternative general-circulation models describing future climate conditions than between contemporary climate data sets. However, we did find that climate envelope models with low Cohen's kappa scores made more discrepant spatial predictions between climate data sets for the contemporary period than did models with high Cohen's kappa scores. We suggest conservation planners evaluate multiple performance metrics and be aware of the importance of differences in initial conditions for spatial predictions from climate envelope models.

Journal of Fish and Wildlife Management↗

USGS2010

Tracking tracer breakthrough in the hyporheic zone using time‐lapse DC resistivity, Crabby Creek, Pennsylvania

Characterization of the hyporheic zone is of critical importance for understanding stream ecology, contaminant transport, and groundwater‐surface water interaction. A salt water tracer test was used to probe the hyporheic zone of a recently re‐engineered portion of Crabby Creek, a stream located near Philadelphia, PA. The tracer solution was tracked through a 13.5 meter segment of the stream using both a network of 25 wells sampled every 5–15 minutes and time‐lapse electrical resistivity tomographs collected every 11 minutes for six hours, with additional tomographs collected every 100 minutes for an additional 16 hours. The comparison of tracer monitoring methods is of keen interest because tracer tests are one of the few techniques available for characterizing this dynamic zone, and logistically it is far easier to collect resistivity tomographs than to install and monitor a dense network of wells. Our results show that resistivity monitoring captured the essential shape of the breakthrough curve and may indicate portions of the stream where the tracer lingered in the hyporheic zone. Time‐lapse resistivity measurements, however, represent time averages over the period required to collect a tomographic data set, and spatial averages over a volume larger than captured by a well sample. Smoothing by the resistivity data inversion algorithm further blurs the resulting tomograph; consequently resistivity monitoring underestimates the degree of fine‐scale heterogeneity in the hyporheic zone.

Pennsylvania↗

USGS2004

Object-based inversion of crosswell radar tomography data to monitor vegetable oil injection experiments

Crosswell radar methods can be used to dynamically image ground-water flow and mass transport associated with tracer tests, hydraulic tests, and natural physical processes, for improved characterization of preferential flow paths and complex aquifer heterogeneity. Unfortunately, because the raypath coverage of the interwell region is limited by the borehole geometry, the tomographic inverse problem is typically underdetermined, and tomograms may contain artifacts such as spurious blurring or streaking that confuse interpretation. We implement object-based inversion (using a constrained, non-linear, least-squares algorithm) to improve results from pixel-based inversion approaches that utilize regularization criteria, such as damping or smoothness. Our approach requires pre- and post-injection travel-time data. Parameterization of the image plane comprises a small number of objects rather than a large number of pixels, resulting in an overdetermined problem that reduces the need for prior information. The nature and geometry of the objects are based on hydrologic insight into aquifer characteristics, the nature of the experiment, and the planned use of the geophysical results. The object-based inversion is demonstrated using synthetic and crosswell radar field data acquired during vegetable-oil injection experiments at a site in Fridley, Minnesota. The region where oil has displaced ground water is discretized as a stack of rectangles of variable horizontal extents. The inversion provides the geometry of the affected region and an estimate of the radar slowness change for each rectangle. Applying petrophysical models to these results and porosity from neutron logs, we estimate the vegetable-oil emulsion saturation in various layers. Using synthetic- and field-data examples, object-based inversion is shown to be an effective strategy for inverting crosswell radar tomography data acquired to monitor the emplacement of vegetable-oil emulsions. A principal advantage of object-based inversion is that it yields images that hydrologists and engineers can easily interpret and use for model calibration.

Journal of Environmental & Engineering Geophysics↗

USGS2019

A preliminary assessment of hyperspectral remote sensing technology for mapping submerged aquatic vegetation in the Upper Delaware River National Parks

Hyperspectral remote sensing of submerged aquatic vegetation is a complex and difficult process that is affected by unique constraints on the energy flow profile near and below the water surface. In addition, shallow, winding, lotic systems, such as the Upper Delaware River, present additional remote sensing problems in the form of specular reflectance, variable depth and constituents in the water column and sometimes extremely weak signal strength due to absorption and scattering in the water column that can be statistically overwhelmed by the reflectance from upland vegetation in any individual image scene. Here we test hyperspectral imagery from the Civil Air Patrol’s (CAP), Airborne Real-time Cueing Hyperspectral Enhanced Recon (ARCHER) system in the scenic waters of two National Parks on the Upper Delaware River. A number of unique image processing problems were encountered, including specular reflectance from winding lotic systems, variable depth and flow dynamics of the riverine environment, and disproportionate signal strength from surface reflectance in this riverine environment. This were solved by applying a specular reflectance removal algorithm, applying field data collections to classification results and masking upland vegetation so as to not statistically overwhelm the weak reflectance signal from surface and near-surface water. Much was learned about conducting imaging spectroscopy in such difficult conditions. Significant results include successful mapping of SAV presenece/absence, advantages of upland masking of the reflectance signal, and a numkber of processing approaches that are unique to this environment. In this paper we summarize our results and identify unique issues that must be addressed in this environment

New Jersey, New York, Pennsylvania↗