SEARCH · USGS Science

Results for “Remote Sensing in Earth Systems Sciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

USGS2017

The Mars Science Laboratory Curiosity rover Mastcam instruments: Preflight and in-flight calibration, validation, and data archiving

The NASA Curiosity rover Mast Camera (Mastcam) system is a pair of fixed-focal length, multispectral, color CCD imagers mounted ~2 m above the surface on the rover's remote sensing mast, along with associated electronics and an onboard calibration target. The left Mastcam (M-34) has a 34 mm focal length, an instantaneous field of view (IFOV) of 0.22 mrad, and a FOV of 20° × 15° over the full 1648 × 1200 pixel span of its Kodak KAI-2020 CCD. The right Mastcam (M-100) has a 100 mm focal length, an IFOV of 0.074 mrad, and a FOV of 6.8° × 5.1° using the same detector. The cameras are separated by 24.2 cm on the mast, allowing stereo images to be obtained at the resolution of the M-34 camera. Each camera has an eight-position filter wheel, enabling it to take Bayer pattern red, green, and blue (RGB) “true color” images, multispectral images in nine additional bands spanning ~400–1100 nm, and images of the Sun in two colors through neutral density-coated filters. An associated Digital Electronics Assembly provides command and data interfaces to the rover, 8 Gb of image storage per camera, 11 bit to 8 bit companding, JPEG compression, and acquisition of high-definition video. Here we describe the preflight and in-flight calibration of Mastcam images, the ways that they are being archived in the NASA Planetary Data System, and the ways that calibration refinements are being developed as the investigation progresses on Mars. We also provide some examples of data sets and analyses that help to validate the accuracy and precision of the calibration.

Earth and Space Science↗

USGS2013

Geodatabase compilation of hydrogeologic, remote sensing, and water-budget-component data for the High Plains aquifer, 2011

The High Plains aquifer underlies almost 112 million acres in the central United States. It is one of the largest aquifers in the Nation in terms of annual groundwater withdrawals and provides drinking water for 2.3 million people. The High Plains aquifer has gained national and international attention as a highly stressed groundwater supply primarily because it has been appreciably depleted in some areas. The U.S. Geological Survey has an active program to monitor the changes in groundwater levels for the High Plains aquifer and has documented substantial water-level changes since predevelopment: the High Plains Groundwater Availability Study is part of a series of regional groundwater availability studies conducted to evaluate the availability and sustainability of major aquifers across the Nation. The goals of the regional groundwater studies are to quantify current groundwater resources in an aquifer system, evaluate how these resources have changed over time, and provide tools to better understand a systems response to future demands and environmental stresses. The purpose of this report is to present selected data developed and synthesized for the High Plains aquifer as part of the High Plains Groundwater Availability Study. The High Plains Groundwater Availability Study includes the development of a water-budget-component analysis for the High Plains completed in 2011 and development of a groundwater-flow model for the northern High Plains aquifer. Both of these tasks require large amounts of data about the High Plains aquifer. Data pertaining to the High Plains aquifer were collected, synthesized, and then organized into digital data containers called geodatabases. There are 8 geodatabases, 1 file geodatabase and 7 personal geodatabases, that have been grouped in three categories: hydrogeologic data, remote sensing data, and water-budget-component data. The hydrogeologic data pertaining to the northern High Plains aquifer is included in three separate geodatabases: (1) base data from a groundwater-flow model; (2) hydrogeology and hydraulic properties data; and (3) groundwater-flow model data to be used as calibration targets. The remote sensing data for this study were developed by the U. S. Geological Survey Earth Resources Observation and Science Center and include historical and predicted land-use/land-cover data and actual evapotranspiration data by using remotely sensed temperature data. The water-budget-component data contains selected raster data from maps in the “Selected Approaches to Estimate Water-Budget Components of the High Plains, 1940 Through 1949 and 2000 Through 2009” report completed in 2011 ( http://pubs.usgs.gov/sir/2011/5183/ ). Federal Geographic Data Committee compliant metadata were created for each spatial and tabular data layer in the geodatabases.

Colorado, Kansas, Nebraska, New Mexico, Oklahoma, ↗

USGS2025

An integrated sensor network and data driven approach to satellite remote sensing of dissolved organic matter

Traditional remote sensing retrieval models for water quality have historically relied on limited, localized data sets due to the prohibitive costs of extensive field campaigns and logistical challenges of collecting match-up data with satellite overpasses. As a result, these models often lack generalizability across seasons, tides, and sites. Furthermore, small field data sets limit the utility of modern machine learning techniques to advance remote sensing retrieval models. In situ optical sensors deployed in a sensor network to continuously monitor larger water bodies can drastically increase the number of measurements, providing the opportunity to develop new approaches for building robust remote sensing retrieval models by leveraging both remote sensing data and in situ networks as an integrated monitoring system. This study leverages a large “ground-to-space” sensor network that combines an in situ optical sensor network with satellite-based remote sensing to overcome these limitations. Utilizing a large-scale data set from the U.S. Geological Survey's Sacramento—San Joaquin River Delta monitoring network, of dissolved organic matter fluorescence measurements, and remote sensing data from the European Space Agency's Sentinel-2A and -2B satellites, this study implemented a data driven approach for dissolved organic matter models. The data set, consisting of 982 samples collected between 2018 and 2021 was used to train and validate a random forest model ( R 2 = 0.76, RMSE = 6.1 Quinine Sulfate Equivalents), with demonstrated applicability across diverse site conditions, tidal stages, and seasons. This work provides a scalable solution to address critical challenges in water quality monitoring and offers a replicable framework for global water quality management.

Calfornia↗

USGS2014

Advances in a distributed approach for ocean model data interoperability

An infrastructure for earth science data is emerging across the globe based on common data models and web services. As we evolve from custom file formats and web sites to standards-based web services and tools, data is becoming easier to distribute, find and retrieve, leaving more time for science. We describe recent advances that make it easier for ocean model providers to share their data, and for users to search, access, analyze and visualize ocean data using MATLAB® and Python®. These include a technique for modelers to create aggregated, Climate and Forecast (CF) metadata convention datasets from collections of non-standard Network Common Data Form (NetCDF) output files, the capability to remotely access data from CF-1.6-compliant NetCDF files using the Open Geospatial Consortium (OGC) Sensor Observation Service (SOS), a metadata standard for unstructured grid model output (UGRID), and tools that utilize both CF and UGRID standards to allow interoperable data search, browse and access. We use examples from the U.S. Integrated Ocean Observing System (IOOS®) Coastal and Ocean Modeling Testbed, a project in which modelers using both structured and unstructured grid model output needed to share their results, to compare their results with other models, and to compare models with observed data. The same techniques used here for ocean modeling output can be applied to atmospheric and climate model output, remote sensing data, digital terrain and bathymetric data.

Journal of Marine Science and Engineering↗

USGS2019

Recognizing the Famine Early Warning Systems Network: Over 30 years of drought early warning science advances and partnerships promoting global food security

On a planet with more than 7 billion people, how do we identify the millions of drought-afflicted people who face a real threat of livelihood disruption or death without humanitarian assistance? Typically, these people are poor and heavily dependent on rainfed agriculture and livestock. Most live in Africa, Central America, or Southwest Asia. When the rains fail, incomes diminish while food prices increase, cutting off the poorest (most often women and children) from access to adequate nutrition. As seen in Ethiopia in 1984 and Somalia in 2011, food shortages can lead to famine. Yet these slow onset disasters also provide opportunities for effective intervention, as seen in Ethiopia in 2015 and Somalia in 2017. Since 1985, the US Agency for International Development's Famine Early Warning Systems Network (FEWS NET) has been providing evidence-based guidance for effective humanitarian relief efforts. FEWS NET depends on a Drought Early Warning System (DEWS) to help understand, monitor, model and predict food insecurity. Here we provide an overview of FEWS NET's DEWS using examples from recent climate extremes. While drought monitoring and prediction provides just one part of FEWS NET's monitoring system, it draws from many disciplines - remote sensing, climate prediction, agro-climatic monitoring, and hydrologic modeling. Here we describe FEWS NET's multi-agency multi-disciplinary DEWS and Food Security Outlooks. This DEWS uses diagnostic analyses to guide predictions. Mid-season droughts are monitored using multiple cutting-edge earth observing systems. Crop and hydrologic models can translate these observations into impacts. This information feeds into FEWS NET reports, helping to save lives by motivating and targeting timely humanitarian assistance.

Bulletin of the American Meteorological Society↗

USGS2024

Dust in the Critical Zone: North American case studies

The dust cycle facilitates the exchange of particles among Earth's major systems, enabling dust to traverse ecosystems, cross geographic boundaries, and even move uphill against the natural flow of gravity. Dust in the atmosphere is composed of a complex and ever-changing mixture that reflects the evolving human footprint on the landscape. The emission, transport, and deposition of dust interacts with and connects Critical Zone processes at all spatial and temporal scales. Landscape properties, land use, and climatic factors influence the wind erosion of soil and nutrient loss, which alters the long-term ecological dynamics at erosional locations. Once in the atmosphere, dust particles influence the amount of solar radiation reaching Earth, and interact with longwave (terrestrial) radiation, with cascading effects on the climate system. Finally, the wet and dry deposition of particles influences ecosystem structure, composition, and function over both short and long-term scales. Tracking dust particles from source to sink relies on monitoring and measurement of the geochemical composition and size distribution of the particles, space-borne and ground-based remote sensing, and dust modeling. Dust is linked to human systems via land use and policies that contribute to dust emissions and the health-related consequences of particulate loads and composition. Despite the significant influence dust has in shaping coupled natural-human systems, it has not been considered a key component of the Critical Zone. Here, we demonstrate that dust particles should be included as a key component of the Critical Zone by outlining how dust interacts with and shapes Earth System processes from generation, through transport, to deposition. We synthesize current understanding from global research and identify critical data and knowledge gaps while showcasing case studies from North America.

Earth-Science Reviews↗

USGS2003

Imaging spectroscopy: Earth and planetary remote sensing with the USGS Tetracorder and expert systems

Imaging spectroscopy is a tool that can be used to spectrally identify and spatially map materials based on their specific chemical bonds. Spectroscopic analysis requires significantly more sophistication than has been employed in conventional broadband remote sensing analysis. We describe a new system that is effective at material identification and mapping: a set of algorithms within an expert system decision‐making framework that we call Tetracorder. The expertise in the system has been derived from scientific knowledge of spectral identification. The expert system rules are implemented in a decision tree where multiple algorithms are applied to spectral analysis, additional expert rules and algorithms can be applied based on initial results, and more decisions are made until spectral analysis is complete. Because certain spectral features are indicative of specific chemical bonds in materials, the system can accurately identify and map those materials. In this paper we describe the framework of the decision making process used for spectral identification, describe specific spectral feature analysis algorithms, and give examples of what analyses and types of maps are possible with imaging spectroscopy data. We also present the expert system rules that describe which diagnostic spectral features are used in the decision making process for a set of spectra of minerals and other common materials. We demonstrate the applications of Tetracorder to identify and map surface minerals, to detect sources of acid rock drainage, and to map vegetation species, ice, melting snow, water, and water pollution, all with one set of expert system rules. Mineral mapping can aid in geologic mapping and fault detection and can provide a better understanding of weathering, mineralization, hydrothermal alteration, and other geologic processes. Environmental site assessment, such as mapping source areas of acid mine drainage, has resulted in the acceleration of site cleanup, saving millions of dollars and years in cleanup time. Imaging spectroscopy data and Tetracorder analysis can be used to study both terrestrial and planetary science problems. Imaging spectroscopy can be used to probe planetary systems, including their atmospheres, oceans, and land surfaces.

Journal of Geophysical Research E: Planets↗

USGS2016

Users and uses of Landsat 8 satellite imagery—2014 survey results

Executive Summary In 2013, Landsat 8 began adding high quality, global, moderate-resolution imagery to the more than 40-year archive of Landsat imagery. To assess the potential effects of the availability of Landsat 8 imagery on users and their work, the U.S. Geological Survey (USGS) Land Remote Sensing Program (LRS) initiated a survey of Landsat users. The objectives of the survey were to 1. Characterize various Landsat user groups, such as United States (U.S.) and international users and Landsat 8 and non-Landsat 8 users; 2. Identify any differences among user groups in uses and preferences; 3. Measure the importance of and satisfaction with Landsat 8 attributes; 4. Assess the importance to users of the frequency of usable imagery; and 5. Determine any challenges in using Landsat 8. The online survey was sent to 51,617 Landsat users registered with USGS in May 2014. Almost 13,000 people responded to the survey for a response rate of 25 percent (n = 12,966). Current Landsat users (users who had used Landsat in their work in the year prior to the survey) composed 89 percent of the sample (n = 11,549) and past Landsat users composed 11 percent (n = 1,417). The results reported here apply to current Landsat users registered with the USGS Earth Resources Observation and Science (EROS) Center. Users from 161 countries responded to the survey. Of those, 19 percent were citizens or permanent residents of the United States and 81 percent resided in other countries. More than 70 percent of current users had used Landsat 8 in the year prior to the survey. The majority of Landsat 8 users (65 percent) were established users who used Landsat imagery regularly both before and after Landsat 8 imagery became available. The average current Landsat user was male, 36 years old, and highly educated, with 9 years of experience using satellite imagery or geographic information system (GIS) software. Landsat 8 users had, on average, two more years of experience than non-Landsat 8 users. Users were employed predominantly by academic institutions (65 percent), followed by private businesses (13 percent), Federal governments (10 percent), State and local governments (6 percent), and nonprofit organizations (6 percent). Of the Landsat imagery obtained in the past year by current users, on average 31 percent came from a Landsat 8 sensor. An equivalent amount came from the Landsat 7 ETM+ sensor (33 percent); slightly less came from Landsats 4 and 5 TM sensors (27 percent). Much less came from Landsats 1 through 5 MSS sensors (5 percent). Overall, more than a third of users’ work used Landsat imagery (38 percent). Of this work, on average, 37 percent of the work was operational. Landsat 8 users considered a greater proportion of their work operational than non-Landsat 8 users (39 percent compared with 29 percent). Environmental sciences and management were the most commonly selected primary applications (selected by 42 percent of users). Land use/land cover (23 percent) was the second most commonly selected primary application, followed by education (12 percent), agriculture (9 percent), and planning and development (6 percent). Landsat 8 users were asked to rank the importance of certain attributes in determining whether to use Landsat 8 imagery in their work. The archive was ranked most important, followed by cost, spatial resolution, extent of coverage, data quality, and frequency of revisit. Users were asked how satisfied they were with these same attributes as they currently apply to Landsat 8 imagery. On average, users were most satisfied with lack of cost, extent of coverage, data quality, and the archive, but they were satisfied with all attributes. Users were asked how often they needed Landsat imagery to meet various requirements for their primary application. The survey question specifically asked how often users needed usable imagery, which differs from how often they would like the Landsat satellites to acquire an image. Users were asked to identify their needed frequency of usable imagery for the following levels: 1. Threshold level—the minimum frequency of usable imagery needed to be of any value to their primary application. 2. Breakthrough level—the frequency of usable imagery that would result in a significant improvement for their primary application of the imagery. 3. Target level—the frequency of usable imagery that would only provide a limited additional increase in the expected performance for their primary application. To meet the threshold level, three-quarters of users needed usable imagery every 17 days or less frequently. At the breakthrough level, two-thirds of users (64 percent) needed a usable image every 5–16 days. The current constellation of two satellites (Landsat 7 and 8) is capable of meeting the threshold and breakthrough needs of most users at least some of the time, but a single satellite would be highly unlikely to do so. Two-fifths of users (40 percent) felt that usable imagery provided every 4 days or more frequently would meet their target level which the current Landsat constellation cannot provide. Landsat 8 users were significantly more likely than non-Landsat 8 users to need usable imagery more frequently to meet their target levels. Additionally, U.S. Landsat 8 users were significantly more likely than other Landsat users to need usable imagery more frequently in order meet both their breakthrough and target levels. To explore the effect of the availability of Landsat 8 imagery on Landsat imagery use in general, established users (those who had consistently used Landsat imagery both before and after Landsat 8 imagery became available) using Landsat 8 imagery were asked about changes in the amount of Landsat imagery they used. The majority of established users using Landsat 8 imagery (60 percent) reported an average increase of 51 percent in the number of scenes obtained after Landsat 8 imagery became available. Landsat 8 users were asked if they had encountered challenges in using Landsat 8 whereas non-Landsat 8 users were asked if such challenges had played a role in why they were not using Landsat 8 imagery. Although many users did not encounter challenges when using or trying to use Landsat 8 data, slightly less than 30 percent did encounter issues with processing the data to a usable point. The most common issue reported was not being able to create or have access to a surface reflectance corrected product. Other challenges were related to the file sizes of images being too large to download, store, or analyze. There were no statistically significant differences between Landsat 8 and non-Landsat 8 users in terms of challenges encountered when using or trying to use the imagery, which indicates that users were not unduly discouraged by the challenges they may have encountered. When asked about potential consequences of not using Landsat 8, more than half of the non-Landsat 8 users did not report detrimental effects on their work from not using the imagery. Of those who did report detrimental effects, decreased quality of work, decreased scope of work, and increased time spent on work were the most common.

Open-File Report↗

USGS2026

Streamflow and surface-water presence data availability across the conterminous United States: A review for headwater systems

Water is essential for life on Earth, supporting ecosystems, human health, and economic activities. Hydrology relies on observational data, and this paper discusses regional and national datasets for the conterminous United States (CONUS) publicly available as of 2023, focusing on headwaters, defined as first- and second-order streams at 1:24000 scale. It identifies 72 primary and secondary datasets and 11 repositories and argues how better integration and accessibility of hydrological data can improve research. The paper distinguishes between datasets where streamflow was the primary data collection objective and those where it was secondary. This distinction highlights opportunities to consider data from efforts peripheral to hydrology but is still useful for understanding hydrologic conditions. The analysis reveals that out of about 118 000 active and inactive stream observation sites, about 6.6% and 25% are located on first- and second-order streams, respectively. This indicates a substantial data gap for headwater systems, which account for over 77% of stream length in CONUS. Federal agencies manage 72% of hydrologic monitoring sites across all stream orders, but only 34% of these are in headwater systems. Academic institutions operate about 2% of sites, with almost half (48%) in headwater systems, focusing on ecosystem research. State agencies also operate about 2% of sites, primarily on larger systems, with 19% on headwaters. Additionally, 23% of sites are managed by multiple agencies. Spatial patterns further reveal pronounced disparities among physiographic regions. Eastern and coastal provinces show relatively dense monitoring, while central and western regions show sparse coverage. These gaps reflect historical priorities, logistical constraints, funding limitations, and the high cost of continuous instrumentation. To address biases in monitoring networks, data collection could be enhanced with low-cost monitoring, community science, and remote sensing technologies. This study also notes the benefits of long-term monitoring and prioritizing retention of streamgages with longer records.

conterminous United States↗

USGS2014

Spectral masking of goethite in abandoned mine drainage systems: implications for Mars

Remote sensing studies of the surface of Mars use visible- to near-infrared (VNIR) spectroscopy to identify hydrated and hydroxylated minerals, which can be used to constrain past environmental conditions on the surface of Mars. However, due to differences in optical properties, some hydrated phases can mask others in VNIR spectra, complicating environmental interpretations. Here, we examine the role of masking in VNIR spectra of natural precipitates of ferrihydrite, schwertmannite, and goethite from abandoned mine drainage (AMD) systems in southeastern Pennsylvania. Mixtures of ferrihydrite, schwertmannite, and goethite were identified in four AMD sites by using X-ray diffractometry (XRD), and their XRD patterns compared to their VNIR spectra. We find that both ferrihydrite and schwertmannite can mask goethite in VNIR spectra of natural AMD precipitates. These findings suggest that care should be taken in interpreting environments on Mars where ferrihydrite, schwertmannite, or goethite are found, as the former two may be masking the latter. Additionally, our findings suggest that outcrops on Mars with both goethite and ferrihydrite/schwertmannite VNIR signatures may have high relative abundances of goethite, or the goethite may exist in a coarsely crystalline phase.

Pennsylvania↗

USGS2024

Increasing seasonal variation in the extent of rivers and lakes from 1984 to 2022

Knowledge of the spatial and temporal distribution of surface water is important for water resource management, flood risk assessment, monitoring ecosystem health, constraining estimates of biogeochemical cycles and understanding our climate. While global-scale spatiotemporal change detection of surface water has significantly improved in recent years due to planetary-scale remote sensing and computing, it has remained challenging to distinguish the changing characteristics of rivers and lakes. Here we analyze the spatial extent of permanent and seasonal rivers and lakes globally over the past 38 years based on new data of river system extents and surface water trends. Results show that while the total permanent surface area of both rivers and lakes has remained relatively constant, the areas with intermittent seasonal coverage have increased by 12 % and 27 % for rivers and lakes, respectively. The increase is statistically significant in over 84 % of global water catchments based on Spearman's rank correlations (rho) above 0.05 and p values less than 0.05. The seasonal river extent is nearly 32 % larger than the previously observed annual mean river extent, suggesting large seasonal variations that impact not only ecosystem health but also estimations of terrestrial biogeochemical cycles of carbon. The outcomes of our analysis are shared as the Surface Area of Rivers and Lakes (SARL) database, serving as a valuable resource for monitoring and research of hydrological cycles, ecosystem accounting, and water management.

Hydrology and Earth System Sciences↗

USGS2022

Fifty years of Landsat science and impacts

Since 1972, the Landsat program has been continually monitoring the Earth, to now provide 50 years of digital, multispectral, medium spatial resolution observations. Over this time, Landsat data were crucial for many scientific and technical advances. Prior to the Landsat program, detailed, synoptic depictions of the Earth's surface were rare, and the ability to acquire and work with large datasets was limited. The early years of the Landsat program delivered a series of technological breakthroughs, pioneering new methods, and demonstrating the ability and capacity of digital satellite imagery, creating a template for other global Earth observation missions and programs. Innovations driven by the Landsat program have paved the way for subsequent science, application, and policy support activities. The economic and scientific value of the knowledge gained through the Landsat program has been long recognized, and despite periods of funding uncertainty, has resulted in the program's 50 years of continuity, as well as substantive and ongoing improvements to payload and mission performance. Free and open access to Landsat data, enacted in 2008, was unprecedented for medium spatial resolution Earth observation data and substantially increased usage and led to a proliferation of science and application opportunities. Here, we highlight key developments over the past 50 years of the Landsat program that have influenced and changed our scientific understanding of the Earth system. Major scientific and programmatic impacts have been realized in the areas of agricultural crop mapping and water use, climate change drivers and impacts, ecosystems and land cover monitoring, and mapping the changing human footprint. The introduction of Landsat collection processing, coupled with the free and open data policy, facilitated a transition in Landsat data usage away from single images and towards time series analyses over large areas and has fostered the widespread use of science-grade data. The launch of Landsat-9 on September 27, 2021, and the advanced planning of its successor mission, Landsat-Next, underscore the sustained institutional support for the program. Such support and commitment to continuity is recognition of both the historic impact the program, and the future potential to build upon Landsat's remarkable 50-year legacy.

Remote Sensing of Environment↗

USGS2025

Global methane budget 2000-2020

Understanding and quantifying the global methane (CH 4 ) budget is important for assessing realistic pathways to mitigate climate change. CH 4 is the second most important human-influenced greenhouse gas in terms of climate forcing after carbon dioxide (CO 2 ), and both emissions and atmospheric concentrations of CH 4 have continued to increase since 2007 after a temporary pause. The relative importance of CH 4 emissions compared to those of CO 2 for temperature change is related to its shorter atmospheric lifetime, stronger radiative effect, and acceleration in atmospheric growth rate over the past decade, the causes of which are still debated. Two major challenges in quantifying the factors responsible for the observed atmospheric growth rate arise from diverse, geographically overlapping CH 4 sources and from the uncertain magnitude and temporal change in the destruction of CH 4 by short-lived and highly variable hydroxyl radicals (OH). To address these challenges, we have established a consortium of multidisciplinary scientists under the umbrella of the Global Carbon Project to improve, synthesise, and update the global CH 4 budget regularly and to stimulate new research on the methane cycle. Following Saunois et al. (2016, 2020), we present here the third version of the living review paper dedicated to the decadal CH 4 budget, integrating results of top-down CH 4 emission estimates (based on in situ and Greenhouse Gases Observing SATellite (GOSAT) atmospheric observations and an ensemble of atmospheric inverse-model results) and bottom-up estimates (based on process-based models for estimating land surface emissions and atmospheric chemistry, inventories of anthropogenic emissions, and data-driven extrapolations). We present a budget for the most recent 2010–2019 calendar decade (the latest period for which full data sets are available), for the previous decade of 2000–2009 and for the year 2020. The revision of the bottom-up budget in this 2025 edition benefits from important progress in estimating inland freshwater emissions, with better counting of emissions from lakes and ponds, reservoirs, and streams and rivers. This budget also reduces double counting across freshwater and wetland emissions and, for the first time, includes an estimate of the potential double counting that may exist (average of 23 Tg CH 4 yr −1 ). Bottom-up approaches show that the combined wetland and inland freshwater emissions average 248 [159–369] Tg CH 4 yr −1 for the 2010–2019 decade. Natural fluxes are perturbed by human activities through climate, eutrophication, and land use. In this budget, we also estimate, for the first time, this anthropogenic component contributing to wetland and inland freshwater emissions. Newly available gridded products also allowed us to derive an almost complete latitudinal and regional budget based on bottom-up approaches. For the 2010–2019 decade, global CH 4 emissions are estimated by atmospheric inversions (top-down) to be 575 Tg CH 4 yr −1 (range 553–586, corresponding to the minimum and maximum estimates of the model ensemble). Of this amount, 369 Tg CH 4 yr −1 or ∼ 65 % is attributed to direct anthropogenic sources in the fossil, agriculture, and waste and anthropogenic biomass burning (range 350–391 Tg CH 4 yr −1 or 63 %–68 %). For the 2000–2009 period, the atmospheric inversions give a slightly lower total emission than for 2010–2019, by 32 Tg CH 4 yr −1 (range 9–40). The 2020 emission rate is the highest of the period and reaches 608 Tg CH 4 yr −1 (range 581–627), which is 12 % higher than the average emissions in the 2000s. Since 2012, global direct anthropogenic CH 4 emission trends have been tracking scenarios that assume no or minimal climate mitigation policies proposed by the Intergovernmental Panel on Climate Change (shared socio-economic pathways SSP5 and SSP3). Bottom-up methods suggest 16 % (94 Tg CH 4 yr −1 ) larger global emissions (669 Tg CH 4 yr −1 , range 512–849) than top-down inversion methods for the 2010–2019 period. The discrepancy between the bottom-up and the top-down budgets has been greatly reduced compared to the previous differences (167 and 156 Tg CH 4 yr −1 in Saunois et al. (2016, 2020) respectively), and for the first time uncertainties in bottom-up and top-down budgets overlap. Although differences have been reduced between inversions and bottom-up, the most important source of uncertainty in the global CH 4 budget is still attributable to natural emissions, especially those from wetlands and inland freshwaters. The tropospheric loss of methane, as the main contributor to methane lifetime, has been estimated at 563 [510–663] Tg CH 4 yr −1 based on chemistry–climate models. These values are slightly larger than for 2000–2009 due to the impact of the rise in atmospheric methane and remaining large uncertainty ( ∼ 25 %). The total sink of CH 4 is estimated at 633 [507–796] Tg CH 4 yr −1 by the bottom-up approaches and at 554 [550–567] Tg CH 4 yr −1 by top-down approaches. However, most of the top-down models use the same OH distribution, which introduces less uncertainty to the global budget than is likely justified. For 2010–2019, agriculture and waste contributed an estimated 228 [213–242] Tg CH 4 yr −1 in the top-down budget and 211 [195–231] Tg CH 4 yr −1 in the bottom-up budget. Fossil fuel emissions contributed 115 [100–124] Tg CH 4 yr −1 in the top-down budget and 120 [117–125] Tg CH 4 yr −1 in the bottom-up budget. Biomass and biofuel burning contributed 27 [26–27] Tg CH 4 yr −1 in the top-down budget and 28 [21–39] Tg CH 4 yr −1 in the bottom-up budget. We identify five major priorities for improving the CH 4 budget: (i) producing a global, high-resolution map of water-saturated soils and inundated areas emitting CH 4 based on a robust classification of different types of emitting ecosystems; (ii) further development of process-based models for inland-water emissions; (iii) intensification of CH 4 observations at local (e.g. FLUXNET-CH 4 measurements, urban-scale monitoring, satellite imagery with pointing capabilities) to regional scales (surface networks and global remote sensing measurements from satellites) to constrain both bottom-up models and atmospheric inversions; (iv) improvements of transport models and the representation of photochemical sinks in top-down inversions; and (v) integration of 3D variational inversion systems using isotopic and/or co-emitted species such as ethane as well as information in the bottom-up inventories on anthropogenic super-emitters detected by remote sensing (mainly oil and gas sector but also coal, agriculture, and landfills) to improve source partitioning.

Earth System Science Data↗

USGS2022

Weakly supervised spatial deep learning for Earth image segmentation based on imperfect polyline labels

In recent years, deep learning has achieved tremendous success in image segmentation for computer vision applications. The performance of these models heavily relies on the availability of large-scale high-quality training labels (e.g., PASCAL VOC 2012). Unfortunately, such large-scale high-quality training data are often unavailable in many real-world spatial or spatiotemporal problems in earth science and remote sensing (e.g., mapping the nationwide river streams for water resource management). Although extensive efforts have been made to reduce the reliance on labeled data (e.g., semi-supervised or unsupervised learning, few-shot learning), the complex nature of geographic data such as spatial heterogeneity still requires sufficient training labels when transferring a pre-trained model from one region to another. On the other hand, it is often much easier to collect lower-quality training labels with imperfect alignment with earth imagery pixels (e.g., through interpreting coarse imagery by non-expert volunteers). However, directly training a deep neural network on imperfect labels with geometric annotation errors could significantly impact model performance. Existing research that overcomes imperfect training labels either focuses on errors in label class semantics or characterizes label location errors at the pixel level. These methods do not fully incorporate the geometric properties of label location errors in the vector representation. To fill the gap, this article proposes a weakly supervised learning framework to simultaneously update deep learning model parameters and infer hidden true vector label locations. Specifically, we model label location errors in the vector representation to partially reserve geometric properties (e.g., spatial contiguity within line segments). Evaluations on real-world datasets in the National Hydrography Dataset (NHD) refinement application illustrate that the proposed framework outperforms baseline methods in classification accuracy.

ACM Transactions on Intelligent Systems and Techno↗

USGS2025

From hydrated silica to quartz: Potential hydrothermal precipitates found in Jezero crater, Mars

On Earth, silica-rich phases from opal to quartz are important indicators and tracers of geological processes. Hydrated silica, such as opal, is a particularly good matrix for the preservation of molecular and macroscopic biosignatures. Cherts, a type of silica-dominated rocks, provide a unique archive of ancient terrestrial life while quartz is the emblematic mineral of the Earth's continental crust. On Mars, hydrated silica has been detected in several locations based on remote sensing and rover-based studies. In the present article we report on the detection of cobbles made of hydrated silica (opal or chalcedony), as well as well-crystallized quartz. These detections were made with the SuperCam instrument onboard Perseverance (Mars 2020 mission), using a combination of LIBS, infrared and Raman spectroscopy. Quartz-dominated stones are detected unambiguously for the first time on the Martian surface, and based on grain size and crystallinity are proposed to be of hydrothermal origin. Although these rocks were all found as float, we propose that these detections are part of a common hydrothermal system, and represent different depths / temperatures of precipitation. This attests that hydrothermal processes were active in and around Jezero crater, possibly triggered by the Jezero crater-forming impact. These silica-rich rocks, in particular opaline silica, are very promising targets for sampling and return to Earth given their high biosignature preservation potential.

Earth and Planetary Science Letters↗

USGS2013

A GIS and statistical approach to identify variables that control water quality in hydrothermally altered and mineralized watersheds, Silverton, Colorado, USA

Hydrothermally altered bedrock in the Silverton mining area, southwest Colorado, USA, contains sulfide minerals that weather to produce acidic and metal-rich leachate that is toxic to aquatic life. This study utilized a geographic information system (GIS) and statistical approach to identify watershed-scale geologic variables in the Silverton area that influence water quality. GIS analysis of mineral maps produced using remote sensing datasets including Landsat Thematic Mapper, advanced spaceborne thermal emission and reflection radiometer, and a hybrid airborne visible infrared imaging spectrometer and field-based product enabled areas of alteration to be quantified. Correlations between water quality signatures determined at watershed outlets, and alteration types intersecting both total watershed areas and GIS-buffered areas along streams were tested using linear regression analysis. Despite remote sensing datasets having varying watershed area coverage due to vegetation cover and differing mineral mapping capabilities, each dataset was useful for delineating acid-generating bedrock. Areas of quartz–sericite–pyrite mapped by AVIRIS have the highest correlations with acidic surface water and elevated iron and aluminum concentrations. Alkalinity was only correlated with area of acid neutralizing, propylitically altered bedrock containing calcite and chlorite mapped by AVIRIS. Total watershed area of acid-generating bedrock is more significantly correlated with acidic and metal-rich surface water when compared with acid-generating bedrock intersected by GIS-buffered areas along streams. This methodology could be useful in assessing the possible effects that alteration type area has in either generating or neutralizing acidity in unmined watersheds and in areas where new mining is planned.

Colorado↗

USGS2026

Understanding the resource potential of natural hydrogen on Earth: Scientific gaps, uncertainties and recommendations

A comprehensive scientific research roadmap is essential to bridge knowledge gaps and deepen the understanding of key geological, geochemical, and geophysical aspects of natural hydrogen (H 2 ) as a potential new energy resource. This paper reviews major scientific uncertainties on natural H 2 , suggesting research priorities, as a guide for defining exploration strategies, techniques, and data interpretation. The uncertainties concern all phases of the natural H 2 cycle, from generation (source rocks) through migration (advection and diffusion) and accumulation (reservoir and cap rocks) to the application and interpretation of subsurface and surface geochemical and geophysical exploration techniques. Understanding H 2 sources and generation rates (the amount of H 2 generated by a given volume of rock over time) is crucial for determining whether a geological H 2 system operates as a short-term dynamic system with rapid H 2 production and release, or as a conventional gas system with long-term accumulations, analogous to petroleum reservoirs. Preliminary estimates for serpentinisation, radiolysis, and organic matter degradation suggest that H 2 generation is not inherently fast, especially for non-hydrothermal continental systems (crystalline basement of shields, ophiolites, peridotite massifs, sedimentary basins), and long-term accumulations, like those of fossil natural gas systems, represent the most likely scenario. The mechanisms of H 2 migration through geological formations require application of fundamental principles of fluid-flow physics, distinguishing advection and diffusion, as well as their forms (from gas-phase, bubble flows to aqueous solutions). Additional studies of H 2 accumulation and retention in subsurface reservoirs could improve understanding of mechanisms of H 2 migration by focusing on the rock fluid-bearing properties and the factors affecting H 2 preservation, such as the presence of cap rocks impermeable to H 2 , pressure conditions, residence times, and microbial or abiotic consumption. Advanced techniques, including reservoir modelling, flow simulations, 3D imaging (micro-CT) of H 2 -bearing rocks, and extraction and analysis of gas occluded in rocks, can provide insights into the stability and potential recoverability of H 2 accumulations. The interpretation of surface exploration techniques, including gas geochemistry, geophysics, and remote sensing, long employed in mineral and energy resource exploration, is now being adapted for natural H 2 studies, but challenges remain in the data interpretation. Distinguishing H 2 seepage due to geological degassing from H 2 produced near the surface by modern microbial processes or artificial sources, such as hammering or drilling for soil-gas sampling, drilling into aquifers, and corrosion in boreholes, is an essential step in exploration. The simple detection of H 2 in soils, even in morphological structures like sub-circular depressions or “fairy circles”, cannot be cursorily interpreted as a signal of natural H 2 seepage from a deep source. A holistic geochemical approach, including isotopic analyses of gases associated with H 2 , is recommended to distinguish among the variety of possible H 2 origins. Observations of H 2 in wells should be interrogated to rule out possible artifacts such as corrosion and drill bit metamorphism. The integration of multiple geophysical methods, including seismic, gravimetric, magnetic, and electro-magnetic surveys, is recommended to mitigate interpretation ambiguities regarding the structure of a subsurface H 2 system (source and reservoir rocks, including fluid and gas storage), due to the non-uniqueness of rock-specific physical properties.

Earth-Science Reviews↗

USGS2022

The future of coastal monitoring through satellite remote sensing

Satellite remote sensing is transforming coastal science from a “data-poor” field into a “data-rich” field. Sandy beaches are dynamic landscapes that change in response to long-term pressures, short-term pulses, and anthropogenic interventions. Until recently, the rate and breadth of beach change have outpaced our ability to monitor those changes, due to the spatiotemporal limitations of our observational capacity. Over the past several decades, only a handful of beaches worldwide have been regularly monitored with accurate yet expensive in situ surveys. The long-term coastal-change data of these few well-monitored beaches have led to in-depth understanding of many site-specific coastal processes. However, because the best-monitored beaches are not representative of all beaches, much remains unknown about the processes and fate of the other >99% of unmonitored beaches worldwide. The fleet of Earth-observing satellites has enabled multiscale monitoring of beaches, for the very first time, by providing imagery with global coverage and up to daily frequency. The long-standing and ever-expanding archive of satellite imagery will enable coastal scientists to investigate coastal change at sites vulnerable to future sea-level rise, that is, (almost) everywhere. In the past decade, our capability to observe coastal change from space has grown substantially with computing and algorithmic power. Yet, further advances are needed in automating monitoring using machine learning, deep learning, and computer vision to fully leverage this massive treasure trove of data. Extensive monitoring and investigation of the causes and effects of coastal change at the requisite spatiotemporal scales will provide coastal managers with additional, valuable information to evaluate problems and solutions, addressing the potential for widespread beach loss due to accelerated sea-level rise, development, and reduced sediment supply. Monitoring from Earth-observing satellites is currently the only means of providing seamless data with high spatiotemporal resolution at the global scale of the impending impacts of climate change on coastal systems.

Cambridge Prisms: Coastal Futures↗