USGS Science⌕ Search

SEARCH · USGS Science

Results for “Precambrian Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

The Redskin granite: Evidence for thermogravitational diffusion in a Precambrian granite batholith

The 1000-Ma-old composite Pikes Peak batholith consists largely of medium- to coarse-grained biotite granite but is intruded by several smaller granite plutons. Two of these, the Tarryall Mountains batholith and the Redskin Granite (Hawley, 1969; Hawley and Wobus, 1977), are here interpreted as cupolas atop the main mass of the Pikes Peak batholith. Chemical analysis for 38 elements in rocks from the Redskin Granite, the Tarryall Mountains batholith, and the biotite granite of the Pikes Peak batholith support the contention that the compositions of the smaller plutons are unlikely to have evolved from that of the main mass of the batholith by crystal fractionation. It is believed that these compositions arose through liquid-state fractionation processes, possibly the convection-aided thermogravitational model of Shaw et al. (1976). It is important to recognize that the chemical signature of this fractionation process can be discerned in holocrystalline rocks as well as in their glassy equivalents because the process may be instrumental in the formation of some kinds of lithophile ore deposits.

Journal of Geophysical Research Solid Earth↗

Seismological and geodetic constraints on the 2011 M w 5.3 Trinidad, Colorado earthquake and induced deformation in the Raton Basin

The Raton Basin of southern Colorado and northern New Mexico is an actively produced hydrocarbon basin that has experienced increased seismicity since 2001, including the August 2011 M w 5.3 Trinidad normal faulting event. Following the 2011 earthquake, regional seismic observations were used to relocate 21 events, including the 2011 main shock, two foreshocks, and 13 aftershocks. Additionally, interferometric synthetic aperture radar (InSAR) observations of both the 2011 event and preevent basin deformation place constraint on the spatial kinematics of the 2011 event and localized basin subsidence due to ground water or gas withdrawal. We find that the 2011 earthquake ruptured an 8–10 km long segment of a normal fault at depths of 1.5–6.0 km within the crystalline Precambrian basement underlying the Raton Basin sedimentary rocks. The earthquake also nucleated within the crystalline basement in the vicinity of an active wastewater disposal site. The ensuing aftershock sequence demonstrated statistical properties expected for intraplate earthquakes, though the length of the 2011 earthquake is unexpectedly long for an M w 5.3 event, suggesting that wastewater disposal may have triggered a low stress drop, otherwise natural earthquake. Additionally, preevent and postevent seismicity in the Raton Basin spatially correlates to regions of subsidence observed in InSAR time series analysis. While these observations cannot discern a causal link between hydrocarbon production and seismicity, they constrain spatial relationships between active basin deformation and geological and anthropogenic features. Furthermore, the InSAR observations highlight the utility of space-based geodetic observations for monitoring and assessing anthropogenically induced and triggered deformation.

Journal of Geophysical Research B: Solid Earth↗

Seismicity induced by wastewater injection in Washington County, Ohio: Influence of preexisting structure, regional stress regime, and well operations

Recent seismicity in Washington County, Ohio, has been suggested to be induced by wastewater disposal operations despite injection ~2 km above the Precambrian basement. We investigated the relationships between disposal well locations and operational histories, spatiotemporal patterns of seismicity enhanced by waveform correlation, and mapped subsurface structures. We also analyzed proxies for in situ stress conditions to evaluate existing principal stress orientations and magnitudes. Double‐difference relocations of small ( M L ≤ 2.1) seismicity revealed linear clusters defining a NE‐SW orientation that parallels the trend of small‐amplitude folds in Upper Paleozoic rocks within 1–2 km of the injection well. Hypocenter depths of ~3.1 to 4.3 km indicate seismicity occurred along faults below the Silurian injection interval in lower Paleozoic strata and Precambrian crystalline basement. Similar folds/faults imaged in nearby seismic reflection lines were associated with basement‐involved fault systems that cut the injection interval targeted by the injection well, providing permeability pathways for fluid pressure increases that initiated slip. Interpreted faults were also optimally oriented in the regional stress field for reactivation due to injection‐related decreases in effective stress. Well completion records suggest that during the recorded seismicity, the Long Run‐1 well was injecting disposal fluids close to or above the fracture pressure of the targeted Silurian injection interval. A comparison of observed seismicity rates and monthly injection records from the disposal well also indicate a close correspondence between earthquake frequency and injection rate. Taken together, these results provide a physical framework for understanding why wastewater disposal operations induced the Washington County seismic sequence.

Ohio↗

40 Ar/ 39 Ar geochronological constraints on the formation of the Dayingezhuang gold deposit: New implications for timing and duration of hydrothermal activity in the Jiaodong gold province, China

China's largest gold resource is located in the highly endowed northwestern part of the Jiaodong gold province. Most gold deposits in this area are associated with the NE- to NNE-trending shear zones on the margins of the 130–126 Ma Guojialing granite. These deposits collectively formed at ca. 120 ± 5 Ma during rapid uplift of the granite. The Dayingezhuang deposit is a large (> 120 t Au) orogenic gold deposit in the same area, but located along the eastern margin of the Late Jurassic Linglong Metamorphic Core Complex. New 40 Ar/ 39 Ar geochronology on hydrothermal sericite and muscovite from the Dayingezhuang deposit indicate the gold event is related to evolution of the core complex at 130 ± 4 Ma and is the earliest important gold event that is well-documented in the province. The Dayingezhuang deposit occurs along the Linglong detachment fault, which defines the eastern edge of the ca. 160–150 Ma Linglong granite–granodiorite massif. The anatectic rocks of the massif were rapidly uplifted, at rates of at least 1 km/m.y. from depths of 25–30 km, to form the metamorphic core complex. The detachment fault, with Precambrian metamorphic basement rocks in the hangingwall and the Linglong granitoids and migmatites in the footwall, is characterized by early mylonitization and a local brittle overprinting in the footwall. Gold is associated with quartz–sericite–pyrite–K-feldspar altered footwall cataclasites at the southernmost area of the brittle deformation along the detachment fault. Our results indicate that there were two successive, yet distinct gold-forming tectonic episodes in northwestern Jiaodong. One event first reactivated the detachment fault along the edge of the Linglong massif between 134 and 126 Ma, and then a second reactivated the shears along the margins of the Guojialing granite. Both events may relate to a component of northwest compression after a middle Early Cretaceous shift from regional NW–SE extension to a NE–SW extensional regime.

Gondwana Research↗

Geologic map of the east part of the San Francisco Volcanic Field, north-central Arizona

The geologic map of the east part of the San Francisco volcanic field (called the East map area) is one of five adjoining geologic maps (fig. 1) prepared under the Geothermal Research Program of the U.S. Geological Survey as a basis for interpreting the history of magmatic activity in the volcanic field. This map is a revision of an earlier one (Moore and Wolfe, 1976). Detail of pyroclastic and alluvial deposits has been reduced for clarity on this uncolored version, and eolian deposits, represented by numerous active dunes of basaltic ash, have been completely omitted. Small cinder cones developed over rootless vents on the basalt flow (Qbb) of = vent 2019 have also been omitted. In addition, a few changes have been made in correlations of flows and vents. The stratigraphic classification has been modified because magnetic-polarity determinations and new K-Ar ages indicate that the physiographically defined Tappan and Woodhouse age groups (Moore and others, 1976) overlap significantly in age, and the rocks of those age groups are now assigned to the Brunhes or Matuyama Polarity Chronozones (Mankinen and Dalrymple, 1979). The San Francisco field, which is largely Pliocene and Pleistocene in age, is in northern Arizona, just north of the broad transition zone between the Colorado Plateau and the Basin and Range province. It is one of several dominantly basaltic volcanic fields of late Cenozoic age situated near the southern margin of the Colorado Plateau. The East map area encompasses approximately 1,220 km 2 . The volcanic field contains rocks ranging in composition from basalt to rhyolite--the products of eruption through Precambrian basement rocks and approximately a kilometer of overlying, nearly horizontal, Paleozoic and Mesozoic sedimentary rocks. About 500 km 3 of erupted rocks cover about 5,000 km 2 of predominantly Permian and locally preserved Triassic sedimentary rocks that form the erosionally stripped surface of the Colorado Plateau in northern Arizona. In the East map area, basalt, basaltic andesite and locally associated small dacite domes, and, in a few cases, andesite were extruded from numerous individual vents, each of which presumably erupted briefly and then became inactive. Such short-lived vents, represented mainly by cinder cones or tuff rings, are widely distributed over the map area, and their flows cover much of its surface. However, repeated eruption of andesite, dacite, and rhyolite domes and flows formed the O'Leary Peak eruptive center in the northwest part of the map area, and flows of andesite (Qa 1 and Qa 2 ) from the San Francisco Mountain stratovolcano entered the East map area from the west. A northeastward progression of volcanism during the past 15 m.y., from central Arizona into the San Francisco volcanic field, is shown by the compilation of Luedke and Smith (1978). Although complicated in detail, a general northeastward to eastward progression of volcanic activity is also apparent within the San Francisco volcanic field. Thus, much of the eruptive activity of the East map area occurred late in the development of the San Francisco field, and the East map area includes the youngest volcanic rocks of the field. These youngest rocks were formed during the Sunset Crater eruption, which occurred within the past 1,000 years (Smiley, 1958). A northeast-trending, faulted monocline occurs near Doney Mountain in the north-central part of the East map area, and a broad north- to northwest-trending anticline occurs at the east edge of the map area. Nearby volcanic rocks are not folded or faulted by either structure. Northwest-trending normal faults of small throw occur in the southern and northwestern parts of the map area. The faults in the northwestern part transect basalt flows of Matuyama and Brunhes ages (Tmb, Qmb, and Qbb). The volcanic rocks are not faulted elsewhere in the East map area. However, local northwestward elongation and alignment of vent deposits, as shown for example by the fissure deposits of the Sunset Crater eruption (Qbsbf), indicate the presence of a northwest-trending fracture system that apparently localized some of the eruptive feeders.

Arizona↗

The Precambrian terranes of Yemen and their correlation with those of Saudi Arabia and Somalia: Implications for the accretion of Gondwana

Most of the basement of Yemen consists of early Precambrian continental high-grade terranes and Neoproterozoic low-grade island arcs that were accreted together to form an arc-continent collage during the Pan-African orogeny (Windley et al., 1996; Whitehouse et al., 1998; Whitehouse et al., in press). The suture zones between the arc and gneiss terranes are major crustal- scale tectonic boundaries. The terranes are situated east of the Nabitah suture and of the collage of low-grade, mainly island arc terranes of the Arabian Shield, but they have been reworked by a Neoproterozoic event associated with island arc accretion. Further east in Yemen are mostly unconformable, very weakly deformed and very low-grade or unmetamorphosed sediments. Thus Yemen provides key information on the broad zone of Neoproterozoic reworking associated with the collisional boundary between western and eastern Gondwana.

Gondwana Research↗

An occurrence of disseminated uraninite in Wheeler Basin, Grand County, Colorado

Disseminated uraninite occurs in Wheeler Basin, Grand County, Colo., about 5 mi (8 km) southeast of Monarch Lake, in Precambrian metamorphic rocks consisting of migmatized gneiss and mixed gneiss and pegmatite. An intrusion of Precambrian Y Silver Plume Granite lies within 400 ft (122 m) of the occurrence. The disseminated uraninite is confined to parts of the host rock that are rich in biotite; highest grade found was 0.73 percent uranium. The disseminated uraninite occurs as cubes and grains, generally from 0.1 to 0.3 mm across. Unit cell edge of the uraninite, ≈ 5.48 A, suggests its pegmatitic origin. The origin of the uraninite disseminations is attributed by us to remobilization and concentration of elements during metamorphism caused by the intrusion of Silver Plume Granite. Uranium and lead isotopic analyses by K. R. Ludwig of uraninite and monazite from biotite concentrations confirm an apparent age of 1,450±20 m.y. for these minerals. This age is equivalent to that reported for the Silver Plume Granite. Although the Wheeler Basin occurrence is small in size, it has many similarities to the Rossing uranium deposit in South-West Africa.

Colorado↗

The 2016 groundwater flow model for Dane County, Wisconsin

A new groundwater flow model for Dane County, Wisconsin, replaces an earlier model developed in the 1990s by the Wisconsin Geological and Natural History Survey (WGNHS) and the U.S. Geological Survey (USGS). This modeling study was conducted cooperatively by the WGNHS and the USGS with funding from the Capital Area Regional Planning Commission (CARPC). Although the overall conceptual model of the groundwater system remains largely unchanged, the incorporation of newly acquired high-quality datasets, recent research findings, and improved modeling and calibration techniques have led to the development of a more detailed and sophisticated model representation of the groundwater system. The new model is three-dimensional and transient, and conceptualizes the county’s hydrogeology as a 12-layer system including all major unlithified and bedrock hydrostratigraphic units and two high-conductivity horizontal fracture zones. Beginning from the surface down, the model represents the unlithified deposits as two distinct model layers (1 and 2). A single layer (3) simulates the Ordovician sandstone and dolomite of the Sinnipee, Ancell, and Prairie du Chien Groups. Sandstone of the Jordan Formation (layer 4) and silty dolostone of the St. Lawrence Formation (layer 5) each comprise separate model layers. The underlying glauconitic sandstone of the Tunnel City Group makes up three distinct layers: an upper aquifer (layer 6), a fracture feature (layer 7), and a lower aquifer (layer 8). The fracture layer represents a network of horizontal bedding-plane fractures that serve as a preferential pathway for groundwater flow. The model simulates the sandstone of the Wonewoc Formation as an upper aquifer (layer 9) with a bedding-plane fracture feature (layer 10) at its base. The Eau Claire aquitard (layer 11) includes shale beds within the upper portion of the Eau Claire Formation. This layer, along with overlying bedrock units, is mostly absent in the preglacially eroded valleys along the Yahara River valley and in northeastern Dane County. Layer 12 represents the Mount Simon sandstone as the lowermost model layer. It directly overlies the Precambrian crystalline basement rock, whose top surface forms the lower boundary of the model. The model uses the USGS MODFLOW-NWT finite-difference code, a standalone version of MODFLOW-2005 that incorporates the Newton (NWT) solver. MODFLOW-NWT improves the handling of unconfined conditions by smoothing the transition from wet to dry cells. The model explicitly simulates groundwater–surface-water interaction with streamflow routing and lake-level fluctuation. Model input included published and unpublished hydrogeologic data from recent estimates of aquifer hydraulic conductivities. A spatial groundwater recharge distribution was obtained from a recent GIS-based, soil-water-balance model for Dane County. Groundwater withdrawals from pumping were simulated for 572 wells across the entire model domain, which includes Dane County and portions of seven neighboring counties—Columbia, Dodge, Green, Iowa, Jefferson, Lafayette, and Rock. These wells withdrew an average of 60 million gallons per day (mgd) over the 5-year period from 2006 through 2010. Within Dane County, 385 wells were simulated with an average withdrawal rate of 52 mgd. Model calibration used the parameter estimation code PEST, and calibration targets included heads, stream and spring flows, lake levels, and borehole flows. Steady-state calibration focused on the period 2006 through 2010; the transient calibration focused on the 7-week drought period from late May through July 2012. This model represents a significant step forward from previous work because of its finer grid resolution, improved hydrostratigraphic discretization, transient capabilities, and more sophisticated representation of surface-water features and multi-aquifer wells. Potential applications of the model include evaluation of potential sites for and impacts of new high-capacity wells, development of wellhead protection plans, evaluating the effects of changing land use and climate on groundwater, and quantifying the relationships between groundwater and surface water.

Wisconsin↗

Origin and age of the Lake Nyos maar, Cameroon

Lake Nyos occupies a young maar crater in the Precambrian granitic terrane of northwest Cameroon. The lake is partly surrounded by poorly consolidated, ultramafic nodule-bearing pyroclastic surge deposits that were explosively ejected from the Nyos crater at the time of its formation. Radiocarbon dates show that the maar probably formed about 400 years ago. Field evidence suggests that carbon dioxide could have been the principal volatile involved in the formation of the Nyos maar, and that the role of water may have been minor. The formation of the Nyos maar was preceded by a brief period of effusive basaltic volcanism, but the maar itself may have largely formed by cold, 'dry' explosive processes. Carbon dioxide may still be trapped interstitially in a diatreme inferred to underlie Lake Nyos; its gradual release into the waters of Lake Nyos may have set the stage for the tragic gas-release event of August 21, 1986. Only young maar lakes such as Nyos may pose a danger of future lethal gas releases. ?? 1989.

Journal of Volcanology and Geothermal Research↗

Geology and hydrocarbon potential of the Dead Sea Rift Basins of Israel and Jordan

Following its middle Miocene inception, numerous basins of varying lengths and depths developed along the Dead Sea fault zone, a large continental transform plate boundary. The modern day left-lateral fault zone has an accumulated left-lateral offset of 105 to 110 km (65 to 68 mi). The deepest basin along the fault zone, the Lake Lisan or Dead Sea basin, reaches depths of 7.5 to 8.5 km (24,500 ft to 28,000 ft), and shows evidence of hydrocarbons. The basins are compartmentalized by normal faulting associated with rapid basin subsidence and, where present, domal uplift accompanying synrift salt withdrawal. The stratigraphy of the fault zone is composed of a thick pre-wrench interval of early Tertiary to Precambrian strata overlain by a syn-wrench section of Miocene to Recent sediments. The main potential source rock is the pre-wrench Cretaceous Maastrichtian Ghareb Formation (and equivalents), which has a total organic carbon (TOC) content measurement of 8 to 18%. Lesser potential source rocks may also be found in the Pleistocene, Cretaceous (Turonian), Jurassic (Oxfordian–Callovian), and Triassic (Ladinian–Carnian). Geochemical analyses indicate that the source of all oils, asphalts, and tars recovered in the Lake Lisan basin is the Ghareb Formation. Geothermal gradients along the Dead Sea fault zone vary from basin to basin. Syn-wrench potential reservoir rocks are highly porous and permeable, whereas pre-wrench strata commonly exhibit lower porosity and permeability. Biogenic gas has been produced from Pleistocene reservoirs. Potential sealing intervals may be present in Neogene evaporites and tight lacustrine limestones and shales. Simple structural traps are not evident; however, subsalt traps may exist. Unconventional source rock reservoir potential has not been tested.

GCSSEPM Foundation Perkins-Rosen Research Conferen↗

Lead and strontium isotopes and related trace elements as genetic tracers in the Upper Cenozoic rhyolite-basalt association of the Yellowstone Plateau volcanic field

Supported by various field geologic and petrologic data, the contents of Pb, U, Th, Rb, and Sr and the isotopic compositions of Pb and Sr for upper Cenozoic volcanic rocks of the Yellowstone Plateau volcanic field are consistent with the hypothesis of derivation of the basaltic and rhyolitic magmas by partial melting of distinct source regions in the upper mantle and lower crust, respectively. All the basalt samples analyzed but one have systematically lower values of 207 Pb/ 204 Pb and 87 Sr/ 86 Sr than the rhyolites. The values of 206 Pb/ 204 Pb are smaller, and 87 Sr/ 86 Sr are mostly larger than known values in oceanic basalts. In all but one case, the values of 207 Pb/ 204 Pb are higher than expected from an extrapolation of known values in oceanic basalts to less radiogenic values of 206 Pb/ 204 Pb. Because there are no xenoliths, phenocrysts are only moderate to sparse in abundance, REE patterns are low and flat at the radiogenic end of lead isotopic compositions, several values of Rb/Sr are low, and 80% of the basalt samples form a well-developed secondary isochron separate from the rhyolites, we favor an interpretation for basalt genesis wherein isotopic signatures of most mafic magmas were attained in a continental ‘keel’ of mantlelike character about 2.6 b.y. old or somewhat older attached to the crust, and these signatures were unaltered by magma passage through the crust. At the very least, the current data continue to cast serious doubt as to the inevitability of crustal contamination for basaltic magma intruding the continental environment and postulate that much can be learned about the mantle under continents through the study of continental basalts. One basalt unit with an unusually low value of 207 Pb/ 204 Pb and an 87 Ar/ 86 Ar less than 0.704 may represent subcontinental ‘keel’-derived magma that rose unaltered to the surface. Our data also are not consistent with formation of this rhyolite-basalt association primarily by such processes as crystal fractionation, separation of immiscible silicate liquids from a common parental magma, or fractional melting of a homogeneous source. Rather as a conceptual model, we envision large mafic intrusions to have been injected into the lower crust resulting in rhyolite generation through partial anatexis of the adjacent wall rocks which probably had a 206 Pb/ 204 Pb < 17 and 87 Sr/ 86 Sr > 0.709; a model that has much in common with that proposed by Holmes (1931). All the other hypotheses listed have the necessary added complication that either the basalt or the rhyolite or both become contaminated after the two magma types separated, have problems accounting for the lack of igneous rocks of intermediate compositions or production of such large volumes of rhyolitic material (∼5000 km 3 ), and fail to explain why rhyolitic magma is not a more common occurrence in the ocean basin. We appeal to bouyancy of rhyolites to generate a barrier for basalt magma migration and account for the great preponderance of rhyolite relative to basalt at the surface. Furthermore, the complex isotopic picture in the rhyolites indicates that many of these magmas interacted with the upper crustal geologic units that they traversed. The interactions involved diverse processes, probably including reacton with hydrothermal fluids or hydrothermally altered rocks at high levels as well as by contamination with Phanerozoic sedimentary and Precambrian crystalline rocks at deeper levels. At the very least, we feel our study adds a cautionary note to the currently increasingly popular hypothesis that differentiation of basalt or gabbro magmas to rhyolite or granite (as distinct from tonalite or dacite) is a common occurrence and is therefore an important continential building process. Models for formation of rhyolite and granite predominantly by reworking of crust (anatexis) must still be considered. The primitive Archean mantle of the region was characterized by higher Rb/Sr, U/Pb, and Th/U values than are typical of modern suboceanic mantle. The mantle residuum within the continental subcrustal lithosperic ‘keel’ that resulted from the Archean crustal differentiation event probably was depleted in Rb/Sr and U/Pb, and the crust was correspondingly enriched in these ratios. The crust probably was further differentiated by an Archean high-grade metamorphism, during or after the primary event, into a granulitic lower crust depleted in U/Pb and Rb/Sr and a lower-grade upper crust enriched in these ratios.

Journal of Geophysical Research Solid Earth↗

Geology of part of the southern complex, Marquette district, Michigan

The southern complex, south of the Marquette synclinorium in the Marquette district of Michigan, is dominantly granitic. The granitic parts of the complex have Rb-Sr ages of about 2.5 b.y. and are classed as of Precambrian W age. The rocks are divided into two major units: (1.) Bell Creek Gneiss consisting mostly of coarse megacrystic granitic rocks and lesser amounts of mafic gneiss and metasedimentary rocks in layers concordant to the foliation of the granitic gneiss, and (2) Compeau Creek Gneiss, previously described to the east, which is mostly medium-grained granitic gneiss and lesser amounts of massive granitic rocks and locally abundant xenoliths of mafic and metasedimentary rocks. Compeau Creek Gneiss intrudes Bell Creek Gneiss throughout the area. Mafic and metasedimentary rocks in the Bell Creek Gneiss are interpreted as remnants of a greenstone belt. The granitic parts of the Bell Creek Gneiss are of problematic origin. Their composition suggests a magmatic origin, but they do not intrude any rocks with which they are in contact; they form concordant layers in all observed places. Granitic parts of the Compeau Creek Gneiss are suspected to be highly altered and partly melted sedimentary rocks. The mafic parts are probably xenoliths of mafic rocks from the Bell Creek Gneiss.

Michigan↗

Uplift of the Colorado Plateau due to lithosphere attenuation during Laramide low-angle subduction

The Colorado Plateau is blanketed by Phanerozoic marine and nonmarine strata as young as Cretaceous that are now exposed at elevations of about 2 km. Crustal thickening due to magmatism and horizontal crustal shortening was far less than necessary to cause this uplift, which is commonly attributed to the consequences of mantle lithosphere thinning and heating. The Colorado Plateau and the midcontinent region around Iowa consist of Precambrian bedrock overlain by a similar amount of Paleozoic platformal strata, and thus both regions once had similar lithospheric buoyancy. Mesozoic sedimentation increased the crustal thickness and lithospheric buoyancy of the Colorado Plateau relative to the midcontinent region. Backstripping calculations yield elevation without these sediments and lead to a calculated elevation difference between the two areas of about 1200 m, which represents unexplained plateau uplift. Review of constraints on uplift timing finds little support for a late Cenozoic uplift age and allows early to middle Cenozoic uplift, which is consistent with uplift mechanisms related to low-angle subduction that ended in the middle Cenozoic. Finite element heat flow calculations of low-angle subduction and lithosphere attenuation, using a range of initial lithosphere thicknesses and degree of attenuation, indicate that required uplift can result from tectonic removal of about 120 km of mantle lithosphere from an initially 200-km-thick lithosphere. This allows for partial preservation of North American mantle lithosphere with its distinctive isotopic signature in some late Cenozoic volcanic rocks and is consistent with normal Pn velocities in the uppermost mantle beneath the plateau.

Journal of Geophysical Research B: Solid Earth↗

Reservoir processes and fluid origins in the Baca geothermal system, Valles Caldera, New Mexico

At the Baca geothermal field in the Valles caldera, New Mexico, 19 deep wells were drilled in an attempt to develop a 50-MW e (megawatts electric) power plant. The chemical and isotopic compositions of steam and water samples have been used to indicate uniquely the origin of reservoir fluids and natural reservoir processes. Two distinct reservoir fluids exist at Baca. These fluids originate from the same deep, high-temperature (335°C), saline (2500 mg/kg Cl) parent water but have had different histories during upflow. One fluid (from wells 4 and 13) is isotopically light, high in radiogenic noble gases, CO 2 and HCO 3 , and low in Ca. It has a temperature of 290°–295°C and a reservoir chloride near 1900 mg/kg. This fluid resulted from rapid upward flow through 1.1- to 1.4-m.y.-old Bandelier Tuff reservoir rocks after long residence in pre-Bandelier (>7 m.y.) sediments and Precambrian basement rocks and 25% dilution with high-altitude cold groundwater from Redondo Peak. The other water (from wells 15, 19, and 24) moved slowly through the Bandelier Tuff and cooled conductively (with minor steam loss for well 19) from 335°C to 280°–260°C. Apparently, short residence in old basement rocks has left this water with low radiogenic gases. Conductive cooling without mixing has kept the original chloride and relatively heavy isotope composition of the deep water. The recharge to the deep parent water is not well understood but may be from lower elevation precipitation outside the Valles caldera area. Gases are in equilibrium in all-liquid reservoir fluids at near reservoir temperatures, and the concentrations of atmospheric gases are similar to those of air-saturated water, indicating little boiling and steam loss. All water, solutes, and gases in the reservoir fluids originate from air-saturated meteoric recharge water, watermineral reactions, and rock leaching, with the possible exception of excess 3He that must have an ultimate mantle source. This gas could originate directly from magma or from leaching of intrusive volcanic rocks beneath the Bandelier.

Journal of Geophysical Research Solid Earth↗

Cylindrical jointing in mafic dikes, central Beartooth Mountains, Montana

Cylindrical joints are well displayed in two Precambrian mafic dikes that cut granitic gneiss in the central Beartooth Mountains, Mont. The dikes are vertical and about 23 m (75 ft) and 23 to 46 m (75-150 ft) thick, respectively. The cylindrical joints are perpendicular to the dike walls, and the cylinders defined by the joints are as much as 5 m (16 ft) in diameter. No petrographic, textural, or other features related to or possibly responsible for the joints are recognized. The dikes are chemically and petrographically similar to quartz dolerite dikes found throughout the Beartooth Mountains. Some of these dikes show typical polygonal columnar joints; a few others have cylindrical jointing, but in most dikes neither kind of jointing was observed. The orientation of the cylindrical joints normal to the walls of the dikes indicates that they probably formed by thermal contraction during post-crystallization cooling of the dikes and are thus genetically related to the much more common polygonal jointing. However, the model proposed to explain the cylindrical joints suggests that their origin is partly dependent on the geometric relation between the orientation of the dikes and that of the predike fracture pattern in the host rock.

Montana, Wyoming↗

Porphyry copper exploration model for northern Sonora, Mexico

The regional tectonic pattern of the porphyry copper province of northern Sonora, Mexico, is similar to, but more complex than, the Colorado mineral belt. Four northeast-trending shear zones, spaced at 30- to 50-kilometer intervals from Hermosillo, Mexico, north to Nogales, Mexico, are interpreted from analysis of lineament data from Landsat-1 images. From comparison with other areas, these zones are believed to have Precambrian ancestry. North-northwest-trending lineaments, which commonly occur along range fronts, are interpreted to be the principal basin and range faults. North-south- and west-northwest-trending lineaments are believed to be related to lesser faults and fractures. Areas of hydrothermal alteration have been mapped on a regional scale by use of digital image-processing techniques. These altered areas occur on the flanks of the northeast-trending shear zones, generally near intersections with north-northwest-trending lineaments. This tectonic framework with associated alteration is similar to patterns in the Colorado Plateau, the porphyry copper province of Arizona, and central Mexico and is supported by relationships found in limited local mapping. The pattern of northeast-trending shear zones and north-northwest-trending faults in northern Sonora closely resembles the tectonic framework of the Colorado mineral belt. The younger sedimentary and volcanic cover, however, has not been eroded in Sonora as it has been in the Colorado mineral belt. This comparison with the Colorado mineral belt suggests that mineral deposits are most likely to be found in altered areas where a northeast-trending shear zone is intersected by north-northwest-trending faults. Seven areas with these characteristics have been defined in Sonora and are being evaluated by means of regional geophysical and geochemical data.

Sonora↗

Interpretation of gravity data in a complex volcano-tectonic setting, southwestern Nevada

This regional gravity study, based on an irregular 2-km data grid, was conducted during the past few years at Yucca Mountain, southern Nye County, Nevada, as part of a program to locate a suitable repository for high-level nuclear waste. About 100 surface rock samples, three borehole gamma-gamma logs, and one borehole gravity study provide excellent density control. A nearly linear increase in density of 0.26 g/cm 3 per kilometer of depth is indicated in the thick tuff sequences that underlie the mountain. Isostatic and 2.0-g/cm 3 Bouguer corrections were applied to the observed gravity values to remove regional gradients and topographic effects, respectively. The Bare Mountain gravity high, with an isostatic anomaly maximum of 48 mGal, is connected with a greater gravity high over the Funeral Mountains, to the southwest; together, these highs result from a continuous block of dense, metamorphosed Precambrian and Paleozoic rocks that stretches across much of the Walker Lane from the east edge of Death Valley to Bare Mountain. The Calico Hills gravity high appears more likely to originate from a northeast trending buried ridge of Paleozoic rocks that extends southwestward beneath Busted Butte, 5 km southeast of the proposed repository, where two- and three-dimensional modeling indicates that the pre-Cenozoic rocks lie less than 1000 m beneath the surface. Tuff, at least 4000 m thick, fills a large steep-sided depression in the pretuff rocks beneath Yucca Mountain and Crater Flat. The gravity low and the thick tuff section lie within a large collapse area that includes the Crater Flat-Timber Mountain-Silent Canyon caldera complexes. Gravity lows in Crater Flat itself are interpreted to coincide with the source areas of the Prow Pass Member, the Bullfrog Member, and the Tram Member of the Crater Flat Tuff; these source areas add nearly 350 km 2 to the previously recognized extent of the local caldera complexes. Southward extension of the broad gravity low associated with Crater Flat into the Amargosa Desert is evidence for sector graben-type collapse segments related to the formation of the Timber Mountain caldera and superimposed on the other volcanic and extensional structures within Crater Flat.

Journal of Geophysical Research Solid Earth↗

Saline ground-water resources of the Tularosa Basin, New Mexico

This report describes the location, extent, and quality of saline ground water in the Tularosa Basin, a north-trending elongated, intermontane, desert basin in south-central New Mexico. There are no through-flowing streams; runoff from the bordering mountains flows to ephemeral lakes in the center of the basin. Fresh-water supplies in the Tularosa Basin are limited; however, large volumes of saline ground-water underlie most of the basin. Consolidated rocks ranging from Precambrian through Cretaceous in age form "bedrock" aquifers in the basin. Where these rocks are exposed in the mountains bordering the basin, and in the north part of the basin, they may yield up to 150 gallons per minute, although yields are usually less than 20 gpm. Water at shallow depths in these rocks usually contain 1-3 g/l. Water quality deteriorates with depth, and more than 35 g/l water is present in some rock units. Few wells have penetrated these rocks beneath the alluvial deposits in the central part of the basin, where well yields and water quality are generally unknown. The most widely developed aquifer in the basin is the alluvial fill of Tertiary to Holocene age which exceeds 6,000 feet in thickness in the southern part of the basin. Well yields of as much as 1,400 gallons per minute have been measured. Fresh water lenses occur in the alluvial fill adjacent to the mountains on the east and west sides of the southern part of the basin. The water below the fresh-water lenses in the alluvial fill increases in salinity with depth. Salinity also increases toward the center of the basin. The altitude of isosaline surfaces and thickness of the saline-water zones are shown on maps of the entire basin and of the following detailed areas within the basin: Alamogordo, Tularosa, Carrizozo, and the western margin of the basin.

New Mexico↗