SEARCH · USGS Science

Results for “Journal of Maps”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

USGS1993

Map showing depth to basement in the deep-sea basins of the Pacific continental margin, Strait of Juan de Fuca to Cape Mendocino

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗

USGS2019

Estimating quick-flow runoff at the monthly timescale for the conterminous United States

The quantitative estimation of the quick-flow runoff component of streamflow is required for many hydrologic applications. Estimation at the monthly timescale and national spatial scale would be particularly useful for national water availability modeling. This paper reviews a sample of commonly used equations for quick-flow runoff, including several currently in use in continental-scale models. The review shows the wide range of equation forms or heuristics currently in use to predict quick-flow runoff, the limited spatial scale over which these equations are often developed or calibrated, and the scarcity of well-tested equations available for quick-flow runoff at the monthly timescale. Data were gathered from a set of 1301 gaged watersheds across the United States to test a range of equations from the literature, along with several alternative equations, to assess and compare their performance in predicting quick-flow runoff at the monthly timescale. The highest-performing equation was selected for application to monthly maps of explanatory variables to produce monthly quick-flow runoff water budget contribution maps. This equation is a regression against precipitation, soil saturated hydraulic conductivity, surficial geology type, and slope data. Its application indicates that average quick-flow runoff across the conterminous United States in the winter exceeds that in the summer by up to a factor of three. The monthly maps were explored and evaluated for the timespan of 2000-2015. The comparison of equation forms and produced monthly maps will be useful for a variety of hydrologic modeling and monitoring applications.

Journal of Hydrology↗

USGS2007

Improving regional-model estimates of urban-runoff quality using local data

Urban water-quality managers need load estimates of storm-runoff pollutants to design effective remedial programs. Estimates are commonly made using published models calibrated to large regions of the country. This paper presents statistical methods, termed model-adjustment procedures (MAPs), which use a combination of local data and published regional models to improve estimates of urban-runoff quality. Each MAP is a form of regression analysis that uses a local data base as a calibration data set to adjust the regional model, in effect increasing the size of the local data base without additional, expensive data collection. The adjusted regional model can then be used to estimate storm-runoff quality at unmonitored sites and storms in the locality. The four MAPs presented in this study are (1) single-factor regression against the regional model prediction, P u ; (2) least-squares regression against P u ; (3) least-squares regression against P u and additional local variables; and (4) weighted combination of P u and a local-regression prediction. Identification of the statistically most valid method among these four depends upon characteristics of the local data base. A MAP-selection scheme based on statistical analysis of the calibration data set is presented and tested.

Journal of the American Water Resources Associatio↗

USGS1974

Unique cartographic characteristics of ERTS

The ERTS television sensing system has unique cartographic advantages over aircraft and satellite film systems. These are longer life combined with greater coverage, transmission of data in near real time, orthogonality, excellent geometric precision for planimetric mapping, suitability for automation (because of the basically continuous image on a mathematically definable map projection), radiometric fidelity, and the extension of sensing capability to near-infrared wavelengths.

Journal of Research of the U.S. Geological Survey↗

USGS1975

Estimates of temperature and precipitation for northeastern Utah

Estimates of temperature and precipitation were made for northeastern Utah from information that was collected at 67 locations. The variable-length records were converted to the common-time base of 1941-70; then general relations were developed to extend the converted point values to unsampled sites. Regression techniques were used to fill voids in the temperature-data base. Incomplete precipitation records were adjusted to the 1941-70 average on the assumption that the ratio of concurrent data is directly proportional to the ratio of the respective 1941-70 average annual values at nearby sites. Equations were then developed through a computer program to express the relationship of temperature and precipitation with altitude and location and to extend the information to unsampled sites. Two-thirds of the observed and estimated average annual temperature and precipitation values are within ±1.5°F (1.0°C) and 2.08 in (53 mm), respectively, of the calculated averages. Schematic diagrams, plotted by computer, were prepared to show variations of altitude, temperature, and precipitation; and maps, also plotted by computer, show lines of equal altitude, precipitation, and temperature.

Utah↗

USGS2014

U.S. Geological Survey Science for the Wyoming Landscape Conservation Initiative - 2013 Annual Report

This is the sixth report produced by the U.S. Geological Survey (USGS) for the Wyoming Landscape Conservation Initiative (WLCI) to detail annual activities conducted by USGS for addressing specific management needs identified by WLCI partners. In FY2013, there were 25 ongoing and new projects conducted by the USGS. These projects fall into 8 major categories: (1) synthesizing and analyzing existing data to describe (model and map) current conditions on the landscape; (2) developing models for projecting past and future landscape conditions; (3) monitoring indicators of ecosystem conditions and the effectiveness of on-the-ground habitat projects; (4) conducting research to elucidate the mechanisms underlying wildlife and habitat responses to changing land uses; (5) managing and making accessible the large number of databases, maps, and other products being developed; (6) helping to integrate WLCI outcomes with future habitat enhancement and research projects; (7) coordinating efforts among WLCI partners; and (8) providing support to WLCI decision-makers and assisting with overall evaluation of the WLCI program. The two new projects initiated in FY2013 address (1) important agricultural lands in southwestern Wyoming, and (2) the influence of energy development on native fish communities. The remaining activities entailed our ongoing efforts to compile data, model landscape conditions, monitor trends in habitat conditions, conduct studies of wildlife responses to energy development, and upgrade Web-based products in support of both individual and overall WLCI efforts. Milestone FY2013 accomplishments included completing the development of a WLCI inventory and monitoring framework and the associated monitoring strategies, protocols, and analytics; and initial development of an Interagency Inventory and Monitoring Database, which will be accessible through the Monitoring page of the WLCI Web site at http://www.wlci.gov/monitoring. We also completed the initial phase of the mountain shrub-mapping project in the Big Piney-La Barge mule deer winter range. Finally, a 3-year survey of pygmy rabbits in four major gas-field areas was completed and used to validate the pygmy rabbit habitat model/map developed earlier in the project. Important products that became available for use by WLCI partners included publication of USGS Data Series report (http://pubs.usgs.gov/ds/800/pdf/ds800.pdf) that compiles our WLCI land cover and land use data, which depict current and historical patterns of sage-grouse habitat in relation to energy development and will be used to pose “what-if” scenarios to evaluate possible outcomes of alternative land-use strategies and practices on habitat and wildlife. Another important FY2013 product was a journal article (http://aapgbull.geoscienceworld.org/content/97/6/899.full) that describes the Mowry Shale and Frontier formation, which harbors coalbed methane and shale gas resources in Wyoming, Colorado, and Utah, for use in future scenario-building work. We also produced maps and databases that depict the structure and condition of aspen stands in the Little Mountain Ecosystem, and then presented this information to the Bureau of Land Management, Wyoming Game and Fish Department, and other interested entities for supporting aspen-management objectives.

Open-File Report↗

USGS1997

Estimating the social value of geologic map information: A regulatory application

People frequently regard the landscape as part of a static system. The mountains and rivers that cross the landscape, and the bedrock that supports the surface, change little during the course of a lifetime. Society can alter the geologic history of an area and, in so doing, affect the occurrence and impact of environmental hazards. For example, changes in land use can induce changes in erosion, sedimentation, and ground-water supply. As the environmental system is changed by both natural processes and human activities, the system's capacity to respond to additional stresses also changes. Information such as geologic maps describes the physical world and is critical for identifying solutions to land use and environmental issues. In this paper, a method is developed for estimating the economic value of applying geologic map information to siting a waste disposal facility. An improvement in geologic map information is shown to have a net positive value to society. Such maps enable planners to make superior land management decisions.

Journal of Environmental Economics and Management↗

USGS1986

A spherical electron-channelling pattern map for use in quartz petrofabric analysis

Electron channelling patterns (ECP's) are formed in the scanning electron microscope (SEM) by the interaction between the incident electrons and the lattice of crystalline specimens. The patterns are unique for a particular crystallographic orientation and are therefore of considerable potential in petrofabric studies provided they can be accurately indexed. Indexing requires an ECP-map of the crystallographic stereogram or unit triangle covering all possible orientations and hence ECP patterns. Due to the presence of long-range distortions in planar ECP-maps, it is more convenient to construct the maps over a spherical surface. This also facilitates the indexing of individual ECP's. A spherical ECP-map for quartz is presented together with an example of its use in petrofabric analysis.

Journal of Structural Geology↗

USGS1999

Depositional history of the Fire Clay coal bed (Late Duckmantian), Eastern Kentucky, USA

More than 3800 coal thickness measurements, proximate analyses from 97 localities, and stratigraphic and sedimentological analyses from more than 300 outcrops and cores were used in conjunction with previously reported palynological and petrographic studies to map individual benches of the coal and document bench-scale variability in the Fire Clay (Hazard No. 4) coal bed across a 1860 km2 area of the Eastern Kentucky Coal Field. The bench architecture of the Fire Clay coal bed consists of uncommon leader benches, a persistent but variable lower bench, a widespread, and generally thick upper bench, and local, variable rider benches. Rheotrophic conditions are inferred for the leader benches and lower bench based on sedimentological associations, mixed palynomorph assemblages, locally common cannel coal layers, and generally high ash yields. The lower bench consistently exhibits vertical variability in petrography and palynology that reflects changing trophic conditions as topographic depressions infilled. Infilling also led to unconfined flooding and ultimately the drowning of the lower bench mire. The drowned mire was covered by an air-fall volcanic-ash deposit, which produced the characteristic flint clay parting. The extent and uniform thickness of the parting suggests that the ash layer was deposited in water on a relatively flat surface without a thick canopy or extensive standing vegetation across most of the study area. Ash deposits led to regional ponding and establishment of a second planar mire. Because the topography had become a broadly uniform, nutrient-rich surface, upper-bench peats became widespread with large areas of the mire distant to clastic sources. Vertical sections of thick (> 70 cm), low-ash yield, upper coal bench show a common palynomorph change from arborescent lycopod dominance upward to fern and densospore-producing, small lycopod dominance, inferred as a shift from planar to ombrotrophic mire phases. Domed mires appear to have been surrounded by wide areas of planar mires, where the coal was thinner (< 70 cm), higher in ash yield, and dominated by arborescent lycopods. Rectangular thickness trends suggest that syndepositional faulting influenced peat accumulation, and possibly the position of the domed mire phase. Faulting also influenced post-depositional clastic environments of deposition, resulting in sandstone channels with angular changes in orientation. Channels and lateral facies were locally draped by high-ash-yield rider coal benches, which sometimes merged with the upper coal bench. These arborescent-lycopod dominant rider coal benches were profoundly controlled by palcotopography, much like the leader coal benches. Each of the benches of coal documented here represent distinctly different mires that came together to form the Fire Clay coal bed, rather than a single mire periodically split by clastic influx. This is significant as each bench of the coal has its own characteristics, which contribute to the total coal characteristics. The large data set allows interpretation of both vertical and lateral limits to postulated domed phases in the upper coal bench, and to the delineation of subtle tectonic structures that allow for meaningful thickness projections beyond the limits of present mining.A study was conducted to analyze the depositional history of the Fire Clay coal bed in the eastern Kentucky coal field. The study involved over 3800 coal thickness measurements, proximate analyses from 97 localities, and stratigraphic and sedimentological analyses from more than 300 outcrops and cores in conjunction with previously reported palynological and petrographic studies to map individual benches of the coal and document bench-scale variability.

International Journal of Coal Geology↗

USGS2012

Venus cartography

The entire surface of the planet Venus is being mapped at global and regional scales (1:50,000,000 through 1:1,500,000) with synthetic aperture radar (SAR), radar altimeter, and radiometer measurements of physical properties from the Magellan spacecraft. The mapping includes SAR image mosaics, shaded relief maps, and topographic contour overlays made from altimetry data and by radargrammetric methods. Methods used include new techniques of radar image processing that became operational as a result of the Magellan mission. The area being mapped (at a resolution of 75 m/pixel) is roughly equivalent to that of Earth, including seafloors. The mapping is designed to support geologic and geophysical investigations.

Journal of Geophysical Research E: Planets↗

USGS2009

An interpolation method for stream habitat assessments

Interpolation of stream habitat can be very useful for habitat assessment. Using a small number of habitat samples to predict the habitat of larger areas can reduce time and labor costs as long as it provides accurate estimates of habitat. The spatial correlation of stream habitat variables such as substrate and depth improves the accuracy of interpolated data. Several geographical information system interpolation methods (natural neighbor, inverse distance weighted, ordinary kriging, spline, and universal kriging) were used to predict substrate and depth within a 210.7-m 2 section of a second-order stream based on 2.5% and 5.0% sampling of the total area. Depth and substrate were recorded for the entire study site and compared with the interpolated values to determine the accuracy of the predictions. In all instances, the 5% interpolations were more accurate for both depth and substrate than the 2.5% interpolations, which achieved accuracies up to 95% and 92%, respectively. Interpolations of depth based on 2.5% sampling attained accuracies of 49–92%, whereas those based on 5% percent sampling attained accuracies of 57–95%. Natural neighbor interpolation was more accurate than that using the inverse distance weighted, ordinary kriging, spline, and universal kriging approaches. Our findings demonstrate the effective use of minimal amounts of small-scale data for the interpolation of habitat over large areas of a stream channel. Use of this method will provide time and cost savings in the assessment of large sections of rivers as well as functional maps to aid the habitat-based management of aquatic species.

West Virginia↗

USGS2012

A new species of Lophostoma d'Orbigny, 1836 (Chiroptera: Phyllostomidae) from Panama

We report the discovery of a new species of Lophostoma from Panama, which we name L. kalkoae . This new species resembles L. carrikeri and L. yasuni in possessing a white venter, but is distinguishable from both by external and cranial characteristics. The new species is similar in size to L. carrikeri and L. schulzi . Lophostoma sp. nov. can be most easily recognized by its combination of white venter, postauricular patches connected by a thin line of pale hair to the white fur on the chest, elongated clitoris and swollen labia, less strongly developed lateral projection of mastoid processes, well-marked indentation on the lingual cingulum of the upper canine, well-developed P3, well-developed posterior lingual cusp on the cingulum of P4, and parastyle absent on M1 and M2. We present a dichotomous key for the genus Lophostoma and a map showing all the localities where white-bellied Lophostoma have been recorded.

Journal of Mammalogy↗

USGS2003

Difficulties in determining factors that influence effective groundwater recharge in Ohio

As part of a COSI Academy research project, data from a recent statewide analysis of effective groundwater recharge were reexamined by students to further discern relations between recharge and selected environmental characteristics of individual drainage basins: 1) location of the main stem of a river relative to coarse and fine surficial sediments and 2) influence of land use. Lack of sufficiently detailed data was the principal difficulty in most phases of the examination. Other than a potential relation between recharge and the percentages of agricultural and forested land, no relations were found in visual comparisons of mapped and tabulated data.

Ohio Journal of Science↗

USGS2004

Comparison of a new GIS-based technique and a manual method for determining sinkhole density: An example from Illinois' sinkhole plain

A new Geographic Information System (GIS) method was developed as an alternative to the hand-counting of sinkholes on topographic maps for density and distribution studies. Sinkhole counts were prepared by hand and compared to those generated from USGS DLG data using ArcView 3.2 and the ArcInfo Workstation component of ArcGIS 8.1 software. The study area for this investigation, chosen for its great density of sinkholes, included the 42 public land survey sections that reside entirely within the Renault Quadrangle in southwestern Illinois. Differences between the sinkhole counts derived from the two methods for the Renault Quadrangle study area were negligible. Although the initial development and refinement of the GIS method required considerably more time than counting sinkholes by hand, the flexibility of the GIS method is expected to provide significant long-term benefits and time savings when mapping larger areas and expanding research efforts. ?? 2004 by The National Speleological Society.

Journal of Cave and Karst Studies↗

USGS2009

The observed relationship between wave conditions and beach response, Ocean Beach, San Francisco, CA

Understanding how sandy beaches respond to storms is critical for effective sediment management and developing successful erosion mitigation efforts. However, only limited progress has been made in relating observed beach changes to wave conditions, with one of the major limiting factors being the lack of temporally dense beach topography and nearshore wave data in most studies. This study uses temporally dense beach topographic and offshore wave data to directly link beach response and wave forcing with generally good results. Ocean Beach is an open coast high-energy sandy beach located in San Francisco, CA, USA. From April 2004 through the end of 2008, 60 three-dimensional topographic beach surveys were conducted on approximately a monthly basis, with more frequent “short-term surveys during the winters of 2005-06 and 2006-07. Shoreline position data from the short-term surveys show good correlation with offshore wave height, period, and direction averaged over several days prior to the survey (mean R*=0.54 for entire beach). There is, however, considerable alongshore variation in model performance, with R- values ranging from 0.81 to 0.19 for individual sections of the beach. After wave height, the direction of wave approach was the most important factor in determining the response of the shoreline, followed by wave period. Our results indicate that an empirical predictive model of beach response to wave conditions at Ocean Beach is possible with frequent beach mapping and wave data, and that such a model could be useful to coastal managers.

California↗

USGS1978

Inventory of land use and land cover of the Puget Sound region using Landsat digital data

Landsat multispectral scanner digital data from four bands were analyzed using computers to produce land use and land cover information of the Puget Sound region, Wash., for use by agencies in that area. The data were first geographically registered to map coordinates. This registration enabled samples of known land cover types to be digitized from the maps. Samples of the same land cover were grouped together and then subdivided by cluster analysis into spectrally similar classes. Spectral categories were associated with specific land cover classes and used to determine spectral signatures for classification of the entire region. Reclustering and reclassification techniques were developed and then employed to minimize certain classification errors. The classified data were displayed in color using a film recorder. This color image was enlarged photographically to a 1:100000 scale to match new base maps of the region. Although the result resembles a conventional polygonal land use and land cover map, certain image-like qualities remain and yield additional information about the landscape.

Washington↗

USGS1974

Thermal inertia mapping from satellite – Discrimination of geologic units in Oman

The Nimbus III and IV satellites provide reflectance and emittance data from the earth's surface at 8-km resolution. These data have been used to derive a physical property of geologic materials termed '"thermal inertia" which appears to have great promise for discriminating surficial units. A thermal inertia map of part of Oman was produced from the Nimbus satellite measurements. Correlation of this map with a reconnaissance geologic map showed gross agreement with the major units but also suggested the need for some modifications of the reconnaissance map. Some of the anomalies were verified by comparison with a later, more detailed map; others remain unexplained and may indicate previously undiscriminated geologic units.

Journal of Research of the U.S. Geological Survey↗

USGS1976

Use of thermal-infrared imagery in ground-water investigations, northwestern Montana

Thermal-infrared imagery was used to locate ground-water inflow along a 50-mile (80-kilometre) reach of the Kootenai River and Lake Koocanusa and a 55-mi (88-km) reach of the Clark Fork of the Columbia River in northwestern Montana and northeastern Idaho. The imagery confirmed that measured streamflow gains below Noxon Rapids Dam, ranging from 1,000 to 2,500 cubic feet per second (28 to 71 cubic metres per second), resulted from inflow of ground water, which was about 2.5° Celsius warmer than surface water. The thermal scanner (8.5-11 micrometres) used in May 1972 and March 1973 was mounted in a twin-engined aircraft. On the March 1973 flight, the data were recorded in an analog format on magnetic tape in flight, later were converted to digital format, and then were computer processed using an assignment of patterns to indicate differences in water temperature. Thus, subtle temperature differences are much easier to identify than they are oh conventional film-negative displays. The output data from the image-processing program can be converted to temperature maps having an isotherm spacing of 0.5°C.

Montana↗