USGS Science⌕ Search

SEARCH · USGS Science

Results for “Dana”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

Comparative mobility of sulfonamides and bromide tracer in three soils

In animal agriculture, sulfonamides are one of the routinely used groups of antimicrobials for therapeutic and sub-therapeutic purposes. It is observed that, the animals when administered the antimicrobials, often do not completely metabolize them; and excrete the partially metabolized forms into the environment. Due to the continued use of antimicrobials and disposal of untreated waste, widespread occurrence of partially metabolized antimicrobials in aquatic and terrestrial environments has been reported in various scientific journals. In this research, the mobility of two sulfonamides - sulfamethazine (SMN), sulfathiazole (STZ) and a conservative bromide tracer was investigated in three soils collected from regions in the United States with large number of concentrated animal-feed operations. Results of a series of column studies indicate that the mobility of these two sulfonamides was dependent on pH, soil charge density, and contact time. At low pH and high charge density, substantial retention of sulfonamides was observed in all three soils investigated, due to the increased fraction of cationic and neutral forms of the sulfonamides. Conversely, enhanced mobility was observed at high pH, where the sulfonamides are predominantly in the anionic form. The results indicate that when both SMN and STZ are predominantly in anionic forms, their mobility approximates the mobility of a conservative bromide tracer. This observation is consistent for the mobility of both SMN and STZ individually, and also in the presence of several other antimicrobials in all three soils investigated. Higher contact time indicates lower mobility due to increased interaction with soil material.

Journal of Environmental Management↗

Reconstructing surface ocean circulation with 129 I time series records from corals

The long-lived radionuclide 129 I (half-life: 15.7 × 10 6 yr) is well-known as a useful environmental tracer. At present, the global 129 I in surface water is about 1–2 orders of magnitude higher than pre-1960 levels. Since the 1990s, anthropogenic 129 I produced from industrial nuclear fuels reprocessing plants has been the primary source of 129 I in marine surface waters of the Atlantic and around the globe. Here we present four coral 129 I time series records from: 1) Con Dao and 2) Xisha Islands, the South China Sea, 3) Rabaul, Papua New Guinea and 4) Guam. The Con Dao coral 129 I record features a sudden increase in 129 I in 1959. The Xisha coral shows similar peak values for 129 I as the Con Dao coral, punctuated by distinct low values, likely due to the upwelling in the central South China Sea. The Rabaul coral features much more gradual 129 I increases in the 1970s, similar to a published record from the Solomon Islands. The Guam coral 129 I record contains the largest measured values for any site, with two large peaks, in 1955 and 1959. Nuclear weapons testing was the primary 129 I source in the Western Pacific in the latter part of the 20th Century, notably from testing in the Marshall Islands. The Guam 1955 peak and Con Dao 1959 increases are likely from the 1954 Castle Bravo test, and the Operation Hardtack I test is the most likely source of the 1959 peak observed at Guam. Radiogenic iodine found in coral was carried primarily through surface ocean currents. The coral 129 I time series data provide a broad picture of the surface distribution and depth penetration of 129 I in the Pacific Ocean over the past 60 years.

Journal of Environmental Radioactivity↗

A spatial classification and database for management, research, and policy making: The Great Lakes aquatic habitat framework

Managing the world's largest and most complex freshwater ecosystem, the Laurentian Great Lakes, requires a spatially hierarchical basin-wide database of ecological and socioeconomic information that is comparable across the region. To meet such a need, we developed a spatial classification framework and database — Great Lakes Aquatic Habitat Framework (GLAHF). GLAHF consists of catchments, coastal terrestrial, coastal margin, nearshore, and offshore zones that encompass the entire Great Lakes Basin. The catchments captured in the database as river pour points or coastline segments are attributed with data known to influence physicochemical and biological characteristics of the lakes from the catchments. The coastal terrestrial zone consists of 30-m grid cells attributed with data from the terrestrial region that has direct connection with the lakes. The coastal margin and nearshore zones consist of 30-m grid cells attributed with data describing the coastline conditions, coastal human disturbances, and moderately to highly variable physicochemical and biological characteristics. The offshore zone consists of 1.8-km grid cells attributed with data that are spatially less variable compared with the other aquatic zones. These spatial classification zones and their associated data are nested within lake sub-basins and political boundaries and allow the synthesis of information from grid cells to classification zones, within and among political boundaries, lake sub-basins, Great Lakes, or within the entire Great Lakes Basin. This spatially structured database could help the development of basin-wide management plans, prioritize locations for funding and specific management actions, track protection and restoration progress, and conduct research for science-based decision making.

Great Lakes↗

Angler dynamics in the St. Clair-Detroit River System after decades of change

Habitat and water quality were historically degraded within the St. Clair-Detroit River System (SCDRS). Beginning in 2004, extensive habitat restoration projects were implemented remediating losses of fish spawning beds and shoreline areas. Monitoring of post-restoration activities documented recovering fish populations; however, angler response remains unknown. Extensive creel surveys were conducted pre-restoration (2002–2004), but post-restoration (2012 and later) surveys were intermittent. The goal of this project was to examine both to create a comprehensive picture of the effects of restoration on angling. We calculated catch and harvest rates and inspected answers to supplemental questions collected by state and provincial agencies. We estimated economic impact of angling with a combination of lodging and gas expenses. Post-restoration, catch rates were higher, but harvest rates were variable for Lake St. Clair and the Detroit River. The 2017 open water boat fishery on Lake St. Clair was worth ∼$26 million. Increased fishing opportunities resulting from continued habitat and population recovery are leading to increased catch rates and likely attracting anglers to the area.

Michigan, Ontario↗

Neoarchean paleoweathering of tonalite and metabasalt: Implications for reconstructions of 2.69Ga early terrestrial ecosystems and paleoatmospheric chemistry

Field and laboratory investigations of a 2690.83 Ma ( 207 Pb/ 206 Pb age of Saganaga Tonalite) unconformity exposed in outcrop in northeastern Minnesota, USA, reveal evidence for development of a deep paleoweathering profile with geochemical biosignatures consistent with the presence of microbial communities and weakly oxygenated conditions. Weathering profiles are characterized by a 5–50 m thick regolith that consists of saprolitized Saganaga Tonalite and Paulson Lake succession basaltic metavolcanic rocks retaining rock structure, which is cross-cut by a major unconformity surface marking development of a successor basin infilled with alluvial deposits. The regolith and unconformity are overlain by thick conglomerate deposits that contain both intrabasinal (saprock) as well as extrabasinal detritus. Thin-section microscopy and electron microprobe analyses reveal extensive hydrolysis and sericitization of feldspars, exfoliation and chloritization of biotite, and weathering of Fe-Mg silicates and Cu-Fe sulfides; weathering of Fe-Ti oxides was relatively less intense than for other minerals and evidence was found for precipitation of Fe oxides. Geochemical analyses of the tonalite, assuming immobile TiO 2 during weathering ( τ Ti, j ), show depletion of SiO 2 , Al 2 O 3 , Na 2 O, CaO, MgO, and MnO, and to a lesser degree of K 2 O, relative to least-weathered parent materials. Significant Fe was lost from the tonalite. A paleoatmospheric pCO 2 of 10–50 times PAL is estimated based on geochemical mass-balance of the tonalite profile and assuming a formation time of 50–500 Kyr. Interpretations of metabasalt paleoweathering are complicated by additions of sediment to the profile and extensive diagenetic carbonate (dolomite) overprinting. Patterns of release of P and Fe and retention of Y and Cu in tonalite are consistent with recent laboratory experiments of granite weathering, and with the presence of acidic conditions in the presence of organic ligands (produced, for example, by a primitive microbial community) during weathering. Cu metal in the profile may document lower pO 2 than present day at the surface. Comparison with previous studies of weathered tonalite and basalt (Denison, 2.45–2.22 Ga) in Ontario, Canada, reveal general similarities in paleoweathering with our study, as well as important differences related to lower paleoatmospheric pO 2 and terrestrial biosignature for the older Minnesota profile. A falling water table in the Alpine Lake locality is presumed to have promoted formation of this gossan-like deep-weathering system that extends to 50-m depth.

Minnesota↗

Mapping the 3-D extent of the Stillwater Complex, Montana—Implications for potential platinum group element exploration and development

Geophysical models characterize the exposed and interpreted buried extent of the Stillwater Complex, critical for understanding the origin of the layered mafic intrusion and its associated high-grade platinum group element resources. The 3D models, constrained by gravity, magnetic, xenolith, seismic, borehole, and rock property data indicate that the likely maximum extent of the Stillwater Complex beneath Phanerozoic cover is ~10 times greater than its outcrop, ~2240 km 2 . The thickness values are poorly constrained but vary from ~7000 to 12,000 m, depending on crustal and mantle density variations and depths to the top of the lower crust and mantle. This thickness may include dense metasedimentary units of the basin into which the Stillwater Complex intruded. Using the modeled thickness results in a volume estimate of ~24,700 km 3 , albeit poorly constrained. New analyses of xenoliths from the Cretaceous Sliderock and Suzie Peak intrusions produce ages of 2706–2716 Ma, corresponding to the age of the Stillwater Complex, and 2813 Ma, corresponding to the age of Archean gneissic basement. Seismic reflectors in inferred Archean crystalline basement, possibly including the Stillwater Complex, dip ~25–30° north, with segments dipping as much as 70° north. Layered reflectors beneath the Phanerozoic sedimentary section and above the inferred Archean crystalline basement may represent metasedimentary units, perhaps a southern extension of the Mesoproterozoic Belt Basin. The potential field models and the seismic reflection data suggest that the Stillwater Complex was dipping northward prior to deposition of Cambrian strata, perhaps uplifted in the late Archean or Proterozoic as previously proposed, and that during Laramide times, faulting and intrusions highly disrupted the complex. Temperature measurements from boreholes help constrain the depths of feasible mining of the complex.

Montana↗

On-orbit calibration and performance of the EMIT imaging spectrometer

The Earth surface Mineral dust source InvesTigation (EMIT) is a remote visible to shortwave infrared (VSWIR) imaging spectrometer that has been operating onboard the International Space Station since July 2022. This article describes EMIT's on-orbit spectroradiometric calibration and validation. Accurate spectroscopy is vital to achieve consistent mapping results with orbital imaging spectrometers. EMIT takes a unique approach to this challenge, with just six optical elements, no shutter, and no onboard calibration systems. Its simple design focuses on uniformity and stability to enable vicarious spectroradiometric calibration. Our experiments demonstrate that this approach is successful, approaching the fidelity of manual field spectroscopy in some cases, and enabling new and more accurate products across diverse Earth science disciplines. EMIT achieves several notable firsts for an instrument of its class. It demonstrates successful on-orbit adjustments of Focal Plane Array (FPA) alignment with sub-micron precision. It offers spectral uniformity better than 98%. Optical artifacts in the measurement channels are at least three orders of magnitude below the primary solar-reflected surface signals. Its noise performance enables percent-level discrimination in the depths of mineral absorption features. In these aspects, EMIT satisfies the stringent performance needs for the next generation of VSWIR imaging spectrometers to observe the Earth's ecosystems, geology , and water resources.

Remote Sensing of Environment↗

Is there a risk associated with the insect repellent DEET (N,N-diethyl-m-toluamide) commonly found in aquatic environments?

DEET ( N , N -diethyl- m -toluamide) is the active ingredient of most commercial insect repellents. This compound has commonly been detected in aquatic water samples from around the world indicating that DEET is both mobile and persistent, despite earlier assumptions that DEET was unlikely to enter aquatic ecosystems. DEET's registration category does not require an ecological risk assessment, thus information on the ecological toxicity of DEET is sparse. This paper reviews the presence of DEET in aqueous samples from around the world (e.g. drinking water, streams, open seawater, groundwater and treated effluent) with reported DEET concentrations ranging from 40–3000 ng L − 1 . In addition, new DEET data collected from 36 sites in coastal waterways from eastern Australia (detections ranging from 8 to 1500 ng L − 1 ) are examined. A summary of new and existing toxicity data are discussed with an emphasis on preparing a preliminary risk assessment for DEET in the aquatic environment. Collated information on DEET in the aquatic environment suggests risk to aquatic biota at observed environmental concentrations is minimal. However, the information available was not sufficient to conduct a full risk assessment due to data deficiencies in source characterisation, transport mechanisms, fate, and ecotoxicity studies. These risks warrant further investigation due to the high frequency that this organic contaminant is detected in aquatic environments around the world.

Science of the Total Environment↗

The occurrence of antibiotics in an urban watershed: From wastewater to drinking water

The presence of 28 antibiotics in three hospital effluents, five wastewater treatment plants (WWTPs), six rivers and a drinking water storage catchment were investigated within watersheds of South&ndash;East Queensland, Australia. All antibiotics were detected at least once, with the exception of the polypeptide bacitracin which was not detected at all. Antibiotics were found in hospital effluent ranging from 0.01&ndash;14.5 &mu;g L -1 , dominated by the &beta;-lactam, quinolone and sulphonamide groups. Antibiotics were found in WWTP influent up to 64 &mu;g L -1 , dominated by the &beta;-lactam, quinolone and sulphonamide groups. Investigated WWTPs were highly effective in removing antibiotics from the water phase, with an average removal rate of greater than 80% for all targeted antibiotics. However, antibiotics were still detected in WWTP effluents in the low ng L -1 range up to a maximum of 3.4 &mu;g L -1 , with the macrolide, quinolone and sulphonamide antibiotics most prevalent. Similarly, antibiotics were detected quite frequently in the low ng L -1 range, up to 2 &mu;g L -1 in the surface waters of six investigated rivers including freshwater, estuarine and marine samples. The total investigated antibiotic concentration (TIAC) within the Nerang River was significantly lower ( p < 0.05) than all other rivers sampled. The absence of WWTP discharge to this river is a likely explanation for the significantly lower TIAC and suggests that WWTP discharges are a dominant source of antibiotics to investigated surface waters. A significant difference ( p < 0.001) was identified between TIACs at surface water sites with WWTP discharge compared to sites with no WWTP discharge, providing further evidence that WWTPs are an important source of antibiotics to streams. Despite the presence of antibiotics in surface waters used for drinking water extraction, no targeted antibiotics were detected in any drinking water samples.

Queensland↗

Earthworm bioassays and seedling emergence for monitoring toxicity, aging and bioaccumulation of anthropogenic waste indicator compounds in biosolids-amended soil

Land application of biosolids (treated sewage sludge) can be an important route for introducing xenobiotic compounds into terrestrial environments. There is a paucity of available information on the effects of biosolids amendment on terrestrial organisms. In this study, the influence of biosolids and biosolids aging on earthworm (Eisenia fetida) reproduction and survival and lettuce (Lactuca sativa) seedling emergence was investigated. Earthworms were exposed to soils amended with varying quantities of biosolids (0, 1, 2, 3, or 4% dry mass). To investigate the influence of biosolids aging, the biosolids used in the study were aged for differing lengths of time (2 or 8 weeks) prior to exposure. All of the adult earthworms survived in the biosolids–amended soils at all concentrations that were aged for 2 weeks; however, only 20% of the adults survived in the soil amended with the highest concentration of biosolids and aged for 8 weeks. Reproduction as measured by mean number of juveniles and unhatched cocoons produced per treatment correlated inversely with biosolids concentration, although the effects were generally more pronounced in the 8-week aged biosolids–soil samples. Latent seedling emergence and reduced seedling fitness correlated inversely with biosolids concentration, but these effects were tempered in the 8-week aged versus the 2-week aged soil–biosolids mixtures. Anthropogenic waste indicator compounds (AWIs) were measured in the biosolids, biosolids–soil mixtures, and earthworm samples. Where possible, bioaccumulation factors (BAFs) were calculated or estimated. A wide variety of AWIs were detected in the biosolids (51 AWIs) and earthworm samples (≤ 19 AWI). The earthworms exposed to the 8-week aged biosolids–soil mixtures tended to accumulate greater quantities of AWIs compared to the 2-week aged mixture, suggesting that the bioavailability of some AWIs was enhanced with aging. The BAFs for a given AWI varied with treatment. Notably large BAFs were determined for some AWIs. For example, the maximum BAF determined for para-cresol, methyl salicylate, bisphenol-A, and cholesterol was greater than 100 in some treatments.

Science of the Total Environment↗

Chemical contaminants in water and sediment near fish nesting sites in the Potomac River basin: determining potential exposures to smallmouth bass (Micropterus dolomieu)

The Potomac River basin is an area where a high prevalence of abnormalities such as testicular oocytes (TO), skin lesions, and mortality has been observed in smallmouth bass (SMB, Micropterus dolomieu). Previous research documented a variety of chemicals in regional streams, implicating chemical exposure as one plausible explanation for these biological effects. Six stream sites in the Potomac basin (and one out-of-basin reference site) were sampled to provide an assessment of chemicals in these streams. Potential early life-stage exposure to chemicals detected was assessed by collecting samples in and around SMB nesting areas. Target chemicals included those known to be associated with important agricultural and municipal wastewater sources in the Potomac basin. The prevalence and severity of TO in SMB were also measured to determine potential relations between chemistry and biological effects. A total of 39 chemicals were detected at least once in the discrete-water samples, with atrazine, caffeine, deethylatrazine, simazine, and iso-chlorotetracycline being most frequently detected. Of the most frequently detected chemicals, only caffeine was detected in water from the reference site. No biogenic hormones/sterols were detected in the discrete-water samples. In contrast, 100 chemicals (including six biogenic hormones/sterols) were found in a least one passive-water sample, with 25 being detected at all such samples. In addition, 46 chemicals (including seven biogenic hormones/sterols) were found in the bed-sediment samples, with caffeine, cholesterol, indole, para-cresol, and sitosterol detected in all such samples. The number of herbicides detected in discrete-water samples per site had a significant positive relation to TO rank (a nonparametric indicator of TO), with significant positive relations between TO rank and atrazine concentrations in discrete-water samples and to total hormone/sterol concentration in bed-sediment samples. Such significant correlations do not necessarily imply causation, as these chemical compositions and concentrations likely do not adequately reflect total SMB exposure history, particularly during critical life stages.

Potomac River Basin↗

Mycotoxins: diffuse and point source contributions of natural contaminants of emerging concern to streams

To determine the prevalence of mycotoxins in streams, 116 water samples from 32 streams and three wastewater treatment plant effluents were collected in 2010 providing the broadest investigation on the spatial and temporal occurrence of mycotoxins in streams conducted in the United States to date. Out of the 33 target mycotoxins measured, nine were detected at least once during this study. The detections of mycotoxins were nearly ubiquitous during this study even though the basin size spanned four orders of magnitude. At least one mycotoxin was detected in 94% of the 116 samples collected. Deoxynivalenol was the most frequently detected mycotoxin (77%), followed by nivalenol (59%), beauvericin (43%), zearalenone (26%), β-zearalenol (20%), 3-acetyl-deoxynivalenol (16%), α-zearalenol (10%), diacetoxyscirpenol (5%), and verrucarin A (1%). In addition, one or more of the three known estrogenic compounds (i.e. zearalenone, α-zearalenol, and β-zearalenol) were detected in 43% of the samples, with maximum concentrations substantially higher than observed in previous research. While concentrations were generally low (i.e. < 50 ng/L) during this study, concentrations exceeding 1000 ng/L were measured during spring snowmelt conditions in agricultural settings and in wastewater treatment plant effluent. Results of this study suggest that both diffuse (e.g. release from infected plants and manure applications from exposed livestock) and point (e.g. wastewater treatment plants and food processing plants) sources are important environmental pathways for mycotoxin transport to streams. The ecotoxicological impacts from the long-term, low-level exposures to mycotoxins alone or in combination with complex chemical mixtures are unknown

Science of the Total Environment↗

Comparison of in vitro estrogenic activity and estrogen concentrations insource and treated waters from 25 U.S. drinking water treatment plants

In vitro bioassays have been successfully used to screen for estrogenic activity in wastewater and surface water, however, few have been applied to treated drinking water. Here, extracts of source and treated water samples were assayed for estrogenic activity using T47D-KBluc cells and analyzed by liquid chromatography-Fourier transform mass spectrometry (LC-FTMS) for natural and synthetic estrogens (including estrone, 17β-estradiol, estriol, and ethinyl estradiol). None of the estrogenswere detected above the LC-FTMS quantification limits in treated samples and only 5 source waters had quantifiable concentrations of estrone, whereas 3 treated samples and 16 source samples displayed in vitro estrogenicity. Estrone accounted for themajority of estrogenic activity in respective samples, however the remaining samples that displayed estrogenic activity had no quantitative detections of known estrogenic compounds by chemical analyses. Source water estrogenicity (max, 0.47 ng 17β-estradiol equivalents (E2Eq) L−1) was below levels that have been linked to adverse effects in fish and other aquatic organisms. Treated water estrogenicity (max, 0.078 ng E2Eq L−1) was considerably below levels that are expected to be biologically relevant to human consumers. Overall, the advantage of using in vitro techniques in addition to analytical chemical determinations was displayed by the sensitivity of the T47D-KBluc bioassay, coupled with the ability tomeasure cumulative effects of mixtures, specifically when unknown chemicals may be present.

Science of the Total Environment↗

The importance of quality control in validating concentrationsof contaminants of emerging concern in source and treateddrinking water samples

A national-scale survey of 247 contaminants of emerging concern (CECs), including organic and inorganic chemical compounds, andmicrobial contaminants, was conducted in source and treated drinkingwater samples from 25 treatment plants across the United States.Multiplemethodswere used to determine these CECs, including six analytical methods tomeasure 174 pharmaceuticals, personal care products, and pesticides. A three-component quality assurance/quality control (QA/QC) programwas designed for the subset of 174 CECswhich allowed us to assess and compare performances of themethods used. The three components included: 1) a common field QA/ QC protocol and sample design, 2) individual investigator-developed method-specific QA/QC protocols, and 3) a suite of 46method comparison analytes thatwere determined in two or more analytical methods. Overallmethod performance for the 174 organic chemical CECs was assessed by comparing spiked recoveries in reagent, source, and treated water over a two-year period. In addition to the 247 CECs reported in the larger drinking water study, another 48 pharmaceutical compoundsmeasured did not consistentlymeet predetermined quality standards. Methodologies that did not seem suitable for these analytes are overviewed. The need to exclude analytes based on method performance demonstrates the importance of additional QA/QC protocols.

Science of the Total Environment↗

Rainfall-runoff of anthropogenic waste indicators from agricultural fields applied with municipal biosolids

The presence of anthropogenic contaminants such as antimicrobials, flame-retardants, and plasticizers in runoff from agricultural fields applied with municipal biosolids may pose a potential threat to the environment. This study assesses the potential for rainfall-induced runoff of 69 anthropogenic waste indicators (AWIs), widely found in household and industrial products, from biosolids amended field plots. The agricultural field containing the test plots was treated with biosolids for the first time immediately prior to this study. AWIs present in soil and biosolids were isolated by continuous liquid-liquid extraction and analyzed by full-scan gas chromatography/mass spectrometry. Results for 18 AWIs were not evaluated due to their presence in field blank QC samples, and another 34 did not have sufficient detection frequency in samples to analyze trends in data. A total of 17 AWIs, including 4-nonylphenol, triclosan, and tris(2-butoxyethyl)phosphate, were present in runoff with acceptable data quality and frequency for subsequent interpretation. Runoff samples were collected 5 days prior to and 1, 9, and 35 days after biosolids application. Of the 17 AWIs considered, 14 were not detected in pre-application samples, or their concentrations were much smaller than in the sample collected one day after application. A range of trends was observed for individual AWI concentrations (typically from 0.1 to 10 μg/L) over the course of the study, depending on the combination of partitioning and degradation mechanisms affecting each compound most strongly. Overall, these results indicate that rainfall can mobilize anthropogenic contaminants from biosolids-amended agricultural fields, directly to surface waters and redistribute them to terrestrial sites away from the point of application via runoff. For 14 of 17 compounds examined, the potential for runoff remobilization during rainstorms persists even after three 100-year rainstorm-equivalent simulations and the passage of a month.

Science of the Total Environment↗

Nationwide reconnaissance of contaminants of emerging concern in source and treated drinking waters of the United States: Pharmaceuticals

Mobile and persistent chemicals that are present in urban wastewater, such as pharmaceuticals, may survive on-site ormunicipal wastewater treatment and post-discharge environmental processes. These pharmaceuticals have the potential to reach surface and groundwaters, essential drinking-water sources. A joint, two-phase U.S. Geological Survey-U.S. Environmental Protection Agency study examined source and treated waters from 25 drinking-water treatment plants from across the United States. Treatment plants that had probable wastewater inputs to their source waters were selected to assess the prevalence of pharmaceuticals in such source waters, and to identify which pharmaceuticals persist through drinking-water treatment. All samples were analyzed for 24 pharmaceuticals in Phase I and for 118 in Phase II. In Phase I, 11 pharmaceuticals were detected in all source-water samples, with amaximumof nine pharmaceuticals detected in any one sample. The median number of pharmaceuticals for all 25 samples was five. Quantifiable pharmaceutical detections were fewer, with a maximum of five pharmaceuticals in any one sample and a median for all samples of two. In Phase II, 47 different pharmaceuticals were detected in all source-water samples, with a maximum of 41 pharmaceuticals detected in any one sample. The median number of pharmaceuticals for all 25 samples was eight. For 37 quantifiable pharmaceuticals in Phase II, median concentrations in source water were below 113 ng/L.

Science of the Total Environment↗

Human health screening and public health significance of contaminants of emerging concern detected in public water supplies

The source water and treated drinking water from twenty five drinking water treatment plants (DWTPs) across the United States were sampled in 2010–2012. Samples were analyzed for 247 contaminants using 15 chemical and microbiological methods. Most of these contaminants are not regulated currently either in drinking water or in discharges to ambient water by the U. S. Environmental Protection Agency (USEPA) or other U.S. regulatory agencies. This analysis shows that there is little public health concern for most of the contaminants detected in treated water from the 25 DWTPs participating in this study. For vanadium, the calculated Margin of Exposure (MOE) was less than the screening MOE in two DWTPs. For silicon, the calculated MOE was less than the screening MOE in one DWTP. Additional study, for example a national survey may be needed to determine the number of people ingesting vanadium and silicon above a level of concern. In addition, the concentrations of lithium found in treated water from several DWTPs are within the range previous research has suggested to have a human health effect. Additional investigation of this issue is necessary. Finally, new toxicological data suggest that exposure to manganese at levels in public water supplies may present a public health concern which will require a robust assessment of this information.

Science of Total Environment↗

Microbial pathogens in source and treated waters from drinking water treatment plants in the United States and implications for human health

An occurrence survey was conducted on selected pathogens in source and treated drinking water collected from 25 drinking water treatment plants (DWTPs) in the United States. Water samples were analyzed for the protozoa Giardia and Cryptosporidium (EPA Method 1623); the fungi Aspergillus fumigatus , Aspergillus niger and Aspergillus terreus (quantitative PCR [qPCR]); and the bacteria Legionella pneumophila (qPCR), Mycobacterium avium , M. avium subspecies paratuberculosis , and Mycobacterium intracellulare (qPCR and culture). Cryptosporidium and Giardia were detected in 25% and in 46% of the source water samples, respectively (treated waters were not tested). Aspergillus fumigatus was the most commonly detected fungus in source waters (48%) but none of the three fungi were detected in treated water. Legionella pneumophila was detected in 25% of the source water samples but in only 4% of treated water samples. M. avium and M. intracellulare were both detected in 25% of source water, while all three mycobacteria were detected in 36% of treated water samples. Five species of mycobacteria, Mycobacterium mucogenicum , Mycobacterium phocaicum , Mycobacterium triplex , Mycobacterium fortuitum , and Mycobacterium lentiflavum were cultured from treated water samples. Although these DWTPs represent a fraction of those in the U.S., the results suggest that many of these pathogens are widespread in source waters but that treatment is generally effective in reducing them to below detection limits. The one exception is the mycobacteria, which were commonly detected in treated water, even when not detected in source waters.

Science of the Total Environment↗