USGS ScienceSearch

SEARCH · USGS Science

Results for “Coast and Ocean”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

U.S. Geological Survey national shoreline change— Summary statistics for updated vector shorelines (1800s–2010s) and associated shoreline change data for the Georgia and Florida coasts

Rates of shoreline change have been updated for the open-ocean sandy coastlines of Georgia and Florida as part of the U.S. Geological Survey’s Coastal Change Hazards programmatic focus. This work was formerly within the National Assessment of Shoreline Change project. Shorelines were compiled from the original report published in 2005, recent update reports, and additional light detection and ranging (lidar) shorelines which were extracted from lidar data collected prior to and following Hurricane Irma, which made landfall in September 2017. These shorelines were used to compute long- and short-term rates that incorporate the proxy-datum bias on a transect-by-transect basis. The proxy-datum bias accounts for the unidirectional onshore bias of proxy-based high water line shorelines relative to datum-based mean high water shorelines. In this study, the coast of Georgia exhibited the highest average rates of erosion and accretion in both the long term (approximately 150 years) and the short term (approximately 30 years). Shoreline positions from the mid-1800s through 2018 were used to update the shoreline change rates for Florida and Georgia using the Digital Shoreline Analysis System (DSAS) software.

Florida, Georgia

USGS Arctic Ocean Carbon Cruise 2012: Field Activity L-01-12-AR to collect carbon data in the Arctic Ocean, August-September 2012

From August 25 to September 27, 2012, the United States Coast Guard Cutter (USCGC) Healy was part of an Extended Continental Shelf Project to determine the limits of the extended continental shelf in the Arctic. On a non-interference basis, a USGS ocean acidification team participated on the cruise to collect baseline water data in the Arctic. The collection of data extended from coastal waters near Barrow, Alaska, to 83°2'N., -175°36'W., and southward back to coastal waters near Barrow and on to Dutch Harbor, Alaska. As a consequence, a number of hypotheses were tested and questions asked associated with ocean acidification, including: What is the saturation state for different parts of the basin? What factors drive the saturation state in the different parts of the basin? How does saturation state compare to other regions? How do the carbon fluxes compare in the different parts of the basin? What is the buffering capacity of the water (Revelle factor)? What kind of variability does carbon demonstrate in the Arctic (near shore versus offshore and diurnal)? During the cruise, underway continuous and discrete water samples were collected, and discrete water samples were collected at stations to document the carbonate chemistry of the Arctic waters and quantify the saturation state of seawater with respect to calcium carbonate. These data are critical for providing baseline information in areas where no data have existed prior and will also be used to test existing models and predict future trends.

Arctic Ocean

Combining storm flood water level and topography to prioritize inter-basin transfer of non-native aquatic species in the United States

Flooded areas can create temporary connections between adjacent drainages and are a relatively understudied pathway for the spread of aquatic invasive species. The Nonindigenous Aquatic Species Database’s Flood and Storm Tracker maps were developed to help natural resource managers with post-storm aquatic invasive species detection and assessment efforts. As of the summer of 2023, 16 Flood and Storm Tracker maps have been published from hurricanes and flooding events in the United States and territorial islands. Three regions along the coasts of the Gulf of Mexico and Atlantic Ocean had overlapping areas of repeated flood impacts, and fifteen pairs of adjacent river basins were potentially connected during floods. Each map had a median of 77 non-native freshwater taxa and a median of three U.S. prohibited species within their respective flood-impacted area. The Flood and Storm Tracker maps provide resource managers with information about new aquatic invasions due to potential flood dispersal that can assist with early detection and rapid response systems.

Biological Invasions

Regional crustal structure and tectonics of the Pacific Coastal States: California, Oregon, and Washington

The Pacific Coastal States form a complex geologic environment in which the crust and lithosphere have been continuously reworked. We divide the region tectonically into the southern transform regime of the San Andreas fault and the northern subduction regime, and summarize the geophysical framework with contour maps of crustal thickness, lithospheric and seismicity cross sections, and results from site-specific geophysical studies. The uniformity of crustal thickness (30 ± 2 km) in southern California is remarkable, and appears to be primarily the result of crustal extension in the Mojave Desert and ductile shear of the lower crust along the plate transform boundary. Southern California seismicity defines a broad zone of deformation that extends from the Borderland to the Mojave Desert (about 300 km). The geophysical framework of central and northern California records magmatism and accretion associated with the Mesozoic and Cenozoic subduction, late Cenozoic transform faulting, and in the Basin and Range to the east, extension. The crust thickens from about 20 km at the coast to as much as 55 km in the Sierra Nevada, and thins to about 30 km in the Basin and Range. Cross sections of the crust show that seismic velocities and densities vary significantly over short distances perpendicular to the coast, reflecting processes that include the accretion of oceanic sediments and igneous crust, and significant lateral motion of crustal blocks. Maximum hypocentral depths in central California become deeper as the crust thickens to the west, but seismicity is low beneath the Great Valley and Sierra Nevada, which together appear to form a relatively undeforming block. The lower crust of the Pacific Coastal States has a high average seismic velocity (6.7 km/sec or greater), which probably is the product of tectonic underplating of oceanic crust and/or magmatic underplating by a basaltic melt.

California, Oregon, Washington

Water resources of Lincoln County coastal area, Oregon

The Lincoln County coastal area is underlain by Tertiary volcanic and sedimentary rocks of low permeability that store only a small volume of the annual precipitation which averages 68 inches (1,730 millimeters). Consequently, the Tertiary units yield small quantities of water to wells and furnish little ground-water discharge to maintain the base flow of streams. Although streamflow is normally abundant during the wet season, flow decreases greatly during summer when needed most. Quaternary marine terrace deposits of semiconsolidated sand border the western part of the area and are the most productive aquifers. Several wells drilled into the Quaternary deposits are among the highest producing wells of the area, with yields of 25 to 60 gallons per minute (1.6 to 3.8 liters per second). The Siletz River Volcanics is one of the better aquifers in the area and generally yields water in volumes sufficient for domestic use. The average well drilled into these rocks yields 5 to 10 gallons per minute (0.3 to 0.6 liters per second). Locally, this formation is quite permeable and has a producing well in the study area, with a yield of 120 gallons per minute (7.6 liters per second). Other volcanic rocks of small areal extent and largely untested, are the basalts near Depoe Bay, Cape Foulweather, Yachats, and Cape Perpetua. Wells drilled in January 1976 near Depoe Bay indicate that as much as 125 gal/min (10 L/s) of water can be obtained from wells drilled into the basalt. Tertiary marine sedimentary rocks of siltstone and sandstone are widespread throughout the area. Yields of wells drilled in these rocks are generally low (less than 5 gallons per minute, or 0.3 liters per second), and many wells in these formations produce no usable quantities of ground water. Approximately 5,000,000 acre-feet (6,000 cubic hectometers) of water discharges annually into the Pacific Ocean from all streams along the Lincoln County coast. About 85 percent of the annual streamflow occurs from November through April. Minimum streamflaws occur from August through October when, at times, as little as 450 acre-feet (55 hectometers) per day flows from all streams. Most of the ground water, with the exception of water from some wells drilled in the marine siltstone and sandstone, contains relatively small concentrations of dissolved minerals. Wells that tap the marine deposits at low altitudes have high concentrations of dissolved minerals, particularly sodium and chloride. In general, analyses of water from the 14 streams sampled in Lincoln County show very good chemical quality. The iron content of Depoe and Thiel Creeks is above the Environmental Protection Agency's recommended limit of 0.3 milligrams per liter for drinking water. Annual water use totals 6.7 billion gallons, which is less than 0.5 percent of runoff. About 70 percent of the use is for industrial purposes at one lumber products mill, about 25 percent is for public supplies, and less than 5 percent for irrigation. Water supplies for all municipalities in Lincoln County currently (1975) are obtained from surface-water sources. Because of rapid economic development of the coastal area, it is expected that additional water will be needed in the future. Additional water can be supplied (1) by reservoirs on major streams; (2) by the expansion, in some locations, of present surface-water facilities on small streams; and (3) locally, by an additional small volume of supplemental water from ground-water sources.

Oregon

Geologic map of the Wildcat Lake 7.5' quadrangle, Kitsap and Mason Counties, Washington

The Wildcat Lake quadrangle lies in the forearc of the Cascadia subduction zone, about 20-km east of the Cascadia accretionary complex exposed in the Olympic Mountains (Tabor and Cady, 1978),and about 100-km west of the axis of the Cascades volcanic arc. The quadrangle lies near the middle of the Puget Lowland, which typically has elevations less than 600 feet (183 m), but on Gold Mountain, in the center of the quadrangle, the elevation rises to 1761 feet (537 m). This anomalously high topography also provides a glimpse of the deeper crust beneath the Lowland. Exposed on Green and Gold Mountains are rocks related to the Coast Range basalt terrane. This terrane consists of Eocene submarine and subaerial tholeiitic basalt of the Crescent Formation, which probably accreted to the continental margin in Eocene time (Snavely and others, 1968). The Coast Range basalt terrane may have originated as an oceanic plateau or by oblique marginal rifting (Babcock and others, 1992), but its subsequent emplacement history is complex (Wells and others, 1984). In southern Oregon, onlapping strata constrain the suturing to have occurred by 50 Ma; but on southern Vancouver Island where the terrane-bounding Leech River fault is exposed, Brandon and Vance (1992) concluded suturing to North America occurred in the broad interval between 42 and 24 Ma. After emplacement of the Coast Range basalt terrane, the Cascadia accretionary complex,exposed in the Olympic Mountains west of the quadrangle,developed by frontal accretion and underplating (e.g., Clowes and others, 1987). The Seattle basin, part of which lies to the north of Green Mountain, also began to develop in late Eocene time due to forced flexural subsidence along the Seattle fault zone (Johnson and others, 1994). Domal uplift of the accretionary complex beneath the Olympic Mountains occurred after approximately 18 million years ago (Brandon and others, 1998). Ice-sheet glaciation during Quaternary time reshaped the topography of the quadrangle, and approximately two-thirds of the map area is covered with Quaternary deposits related to the last glaciation. Geophysical studies and regional mapping indicate the Seattle fault lies north of Green Mountain. This fault produced a large earthquake about 1000 years ago and may pose a significant earthquake hazard (Bucknam and others, 1992; Atwater and Moore, 1992; Karlin and Abella,1992; Schuster and others, 1992; Jacoby and others, 1992). We found no evidence of Holocene faulting in the Wildcat Lake quadrangle. Geologic mapping within and marginal to the quadrangle began with Willis (1898), who described glacial deposits in Puget Sound. Weaver (1937) correlated volcanic rocks in the quadrangle to the Eocene Metchosin Volcanics on Vancouver Island. Sceva (1957), Garling and Moleenar (1965), and Deeter (1978) all focused on mapping and understanding the Quaternary stratigraphy of the Kitsap Peninsula, but they also examined bedrock in the quadrangle. Reeve (1979) was the first to examine the igneous rocks on Green and Gold Mountains in some detail, and Clark (1989) significantly improved Reeve's (1979) mapping. Clark's (1989) mapping was conducted soon after extensive logging on the mountains. A surficial geologic map of the Seattle 1:100,000-scale quadrangle, which includes the Wildcat Lake 1:24,000-scale quadrangle, was published by Yount and others (1993). Yount and Gower (1991) also published a bedrock geologic map of the Seattle quadrangle. Geologic mapping for this report was conducted by Haeussler in the spring and summer of 1998 and in the winter of 1999. We could not substantially improve upon the bedrock mapping of Clark (1989) and thus it is incorporated into this map. Well data in the southeastern corner of the map area also helped to constrain the surficial mapping (Geomatrix Consultants, 1997). In addition, 1995 vintage 1:12,000-scale aerial photographs were used in mapping Quaternary deposits. Geologic time scale is that of Berggeren and others (1995).

Washington

Map of glacial limits and possible refugia in the southern Alexander Archipelago, Alaska, during the late Wisconsin glaciation

During the late Wisconsin glaciation (circa 26,000-13,000 carbon-14 yr BP) the Cordilleran glacier complex formed vast ice fields and large glaciers along the crest of the Coast Mountains. As these glaciers flowed west to the Pacific Ocean, they were joined by local glaciers originating on the higher reaches of the Alexander Archipelago (Mann and Hamiltion, 1995). This extensive volume of ice was channeled into deep troughs (present-day fiords) that formed major outlet glaciers, such as the glaciers that occupied Chatham Strait and Dixon Entrance. In several places along the coast, deep glacially scoured submarine troughs indicate that glaciers reached to the edge of the continental shelf. For instance, the glacier that extended into the Dixon Entrance trough is known to have extended to the edge of the continental shelf. Its retreat began sometime after 16,000-15,000 carbon-14 yr BP (Barrie and Conway, 1999).

Miscellaneous Field Studies Map

The gravity field of the U.S. Atlantic continental margin

Approximately 39,000 km of marine gravity data collected during 1975 and 1976 have been integrated with U.S. Navy and other available data over the U.S. Atlantic continental margin between Florida and Maine to obtain a 10 mgal contour free-air gravity anomaly map. A maximum typically ranging from 0 to +70 mgal occurs along the edge of the shelf and Blake Plateau, while a minimum typically ranging from −20 to −80 mgal occurs along the base of the continental slope, except for a −140 mgal minimum at the base of the Blake Escarpment. Although the maximum and minimum free-air gravity values are strongly influenced by continental slope topography and by the abrupt change in crustal thickness across the margin, the peaks and troughs in the anomalies terminate abruptly at discrete transverse zones along the margin. These zones appear to mark major NW—SE fractures in the subsided continental margin and adjacent deep ocean basin, which separate the margin into a series of segmented basins and platforms. Rapid differential subsidence of crustal blocks on either side of these fractures during the early stages after separation of North America and Africa (Jurassic and Early Cretaceous) is inferred to be the cause of most of the gravity transitions along the length of margin. The major transverse zones are southeast of Charleston, east of Cape Hatteras, near Norfolk Canyon, off Delaware Bay, just south of Hudson Canyon and south of Cape Cod. Local Airy isostatic anomaly profiles (two-dimensional, without sediment corrections) were computed along eight multichannel seismic profiles. The isostatic anomaly values over major basins beneath the shelf and rise are generally between −10 and −30 mgal while those over the platform areas are typically 0 to +20 mgal. While a few isostatic anomaly profiles show local 10–20 mgal increases seaward of the East Coast Magnetic Anomaly (ECMA: inferred to mark the ocean-continent boundary), the lack of a consistent correlation indicates that the relationship of isostatic gravity anomalies to the magnetic anomalies and the ocean—continent transition is variable. Two-dimensional gravity models have been computed for two profiles off Cape Cod, Massachusetts and Cape May, New Jersey, where excellent reflection, refraction and magnetic control appear to define 10 and 12 km deep sedimentary basins beneath the shelf, respectively and 10 km deep basins beneath the rise. The basins are separated by a 6–8 km deep basement ridge which underlies the ECMA and appears to mark the landward edge of oceanic crust. The gravity models suggest that the oceanic crust is between 11 and 18 km thick beneath the ECMA, but decreases to a thickness of less than 8 km within the first 20–90 km to the southeast. In both profiles, the derived crustal thickness variations support the interpretation that the ECMA occurs over the ocean-continent boundary. The crust underlying the sedimentary cover appears to be 12 to 15 km thick on the landward side of the ECMA and gradually thickens to normal continental values of greater than 25 km within the first 60 to 110 km to the northwest. Multichannel seismic profiles across platform areas, such as Cape Hatteras and Cape Cod, indicate the ocean-continent transition zones there are much narrower than profiles across major sedimentary basins, such as the one off New Jersey.

Tectonophysics

The Indian Ocean: The geology of its bordering lands and the configuration of its floor

The ocean realm, which covers more than 70 percent of the earth's surface, contains vast areas that have scarcely been touched by exploration. The best known parts of the sea floor lie close to the borders of the continents, where numerous soundings have been charted as an aid to navigation. Yet, within this part of the sea floor, which constitutes a border zone between the toast and the ocean deeps, much more detailed information is needed about the character of the topography and geology. At many places, stratigraphic and structural features on the coast extend offshore, but their relationships to the rocks of the shelf and slope are unknown, and the geology of the coast must be projected seaward across the continental shelf and slope. The Indian Ocean, the third largest ocean of the world, has been selected for intensive study by an international group using all modern techniques to determine its physical characteristics. This report, with accompanying illustrations, has been prepared as a very generalized account of some aspects of the geology of the vast coastal areas of the northern Indian Ocean in relation to the bordering shelves and ocean deeps. Its general purpose is to serve as background reading.

IMAP

Geologic Map of the Woodland Quadrangle, Clark and Cowlitz Counties, Washington

The Woodland 7.5' quadrangle is situated in the Puget-Willamette Lowland approximately 50 km north of Portland, Oregon (fig. 1). The lowland, which extends from Puget Sound into west-central Oregon, is a complex structural and topographic trough that lies between the Coast Range and the Cascade Range. Since late Eocene time, the Cascade Range has been the locus of an active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range occupies the forearc position within the Cascadia arc-trench system and consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Woodland quadrangle lies at the northern edge of the Portland Basin, a roughly 2000-km2 topographic and structural depression that is the northernmost of several sediment-filled structural basins, which collectively constitute the Willamette Valley segment of the Puget-Willamette Lowland (Beeson and others, 1989; Swanson and others, 1993; Yeats and others, 1996). The Portland Basin is approximately 70 km long and 30 km wide; its long dimension is oriented northwest. Its northern boundary coincides, in part, with the lower Lewis River, which flows westward through the center of the quadrangle. The Lewis drains a large area in the southern Washington Cascade Range, including the southern flank of Mount St. Helens approximately 25 km upstream from the quadrangle, and joins the Columbia River about 6 km south of Woodland (fig. 1). Northwest of Woodland, the Columbia River exits the broad floodplain of the Portland Basin and flows northward through a relatively narrow bedrock valley at an elevation near sea level. The flanks of the Portland Basin consist of Eocene through Miocene volcanic and sedimentary rocks that rise to elevations exceeding 2000 ft (610 m). Seismic-reflection profiles (L.M. Liberty, written commun., 2003) and lithologic logs of water wells (Swanson and others, 1993; Mabey and Madin, 1995) indicate that as much as 550 m of late Miocene and younger sediments have accumulated in the deepest part of the basin near Vancouver. Most of this basin-fill material was carried in from the east by the Columbia River but sediment deposited by streams draining the adjacent highlands are locally important. The Portland Basin has been interpreted as a pull-apart basin located in the releasing stepover between two en echelon, northwest-striking, right-lateral fault zones (Beeson and others, 1985, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). These fault zones are thought to reflect regional transpression and dextral shear within the forearc in response to oblique subduction of the Pacific Plate along the Cascadia Subduction Zone (Pezzopane and Weldon, 1993; Wells and others, 1998). The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded on its northeast flank by the Portland Hills Fault Zone (Balsillie and Benson, 1971; Beeson and others, 1989; Blakely and others, 1995), which is probably an active structure (Wong and others, 2001; Liberty and others, 2003). The nature of the corresponding northeastern margin of the basin is less clear, but a poorly defined and partially buried dextral extensional fault zone has been hypothesized from topography, microseismicity, potential field-anomalies, and reconnaissance geologic mapping (Beeson and others, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). Another dextral structure may control the north-northwest-trending reach of the Columbia River between Portland and Longview (Blakely and others, 1995; Evarts, 2002; Evarts and others, 2002). This map is a contribution to a U.S. Geological Survey program designed to improve the geologic database for the Portland Basin part of the Pacific Northwest urban corridor,

Scientific Investigations Map

Geologic Map of the Saint Helens Quadrangle, Columbia County, Oregon, and Clark and Cowlitz Counties, Washington

The Saint Helens 7.5' quadrangle is situated in the Puget-Willamette Lowland approximately 35 km north Portland, Oregon. The lowland, which extends from Puget Sound into west-central Oregon, is a complex structural and topographic trough that lies between the Coast Range and the Cascade Range. Since late Eocene time, Cascade Range has been the locus of a discontinuously active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range occupies the forearc position within the Cascadia arc-trench system and consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Saint Helens quadrangle lies in the northern part of the Portland Basin, a roughly 2000-km2 topographic and structural depression. It is the northernmost of several sediment-filled structural basins that collectively constitute the Willamette Valley segment of the Puget-Willamette Lowland (Beeson and others, 1989; Swanson and others, 1993; Yeats and others, 1996). The rhomboidal basin is approximately 70 km long and 30 km wide, with its long dimension oriented northwest. The Columbia River flows west and north through the Portland Basin at an elevation near sea level and exits through a confined bedrock valley less than 2.5 km wide about 16 km north of Saint Helens. The flanks of the basin consist of Eocene through Miocene volcanic and sedimentary rocks that rise to elevations exceeding 2000 ft (610 m). Seismic-reflection profiles (L.M. Liberty, written commun., 2003) and lithologic logs of water wells (Swanson and others, 1993; Mabey and Madin, 1995) indicate that as much as 550 m of late Miocene and younger sediments have accumulated in the deepest part of the basin near Vancouver. Most of this basin-fill material was carried in from the east by the Columbia River but contributions from streams draining the adjacent highlands are locally important. The Portland Basin has been interpreted as a pull-apart basin located in the releasing stepover between two echelon, northwest-striking, right-lateral fault zones (Beeson and others, 1985, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). These fault zones are thought to reflect regional transpression and dextral shear within the forearc in response to oblique subduction along the Cascadia Subduction Zone Pezzopane and Weldon, 1993; Wells and others, 1998). The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded its northeast flank by the Portland Hills Fault Zone (Balsillie and Benson, 1971; Beeson and others, 1989; Blakely and others, 1995), which is probably an active structure (Wong and others, 2001; Liberty and others, 2003). The nature of the corresponding northeastern margin of the basin is less clear, but a poorly defined and partially buried dextral extensional fault zone has been hypothesized from topography, microseismicity, potential fieldanomalies, and reconnaissance geologic mapping (Beeson and others, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). Another dextral structure, the Kalama Structural Zone of Evarts (2002), may underlie the north-northwest-trending reach of the Columbia River north of Woodland (Blakely and others, 1995). This map is a contribution to a U.S. Geological Survey (USGS) program designed to improve the geologic database for the Portland Basin region of the Pacific Northwest urban corridor, the populated forearc region of western Washington and Oregon. Better and more detailed information on the bedrock and surficial geology of the basin and its surrounding area is needed to refine assessments of seismic risk (Yelin and Patton, 1991; Bott and Wong, 1993), ground-failure hazards (Madin and Wang, 1999; Wegmann and Walsh, 2001) and resource availability in this rapid

Scientific Investigations Map

Geologic map of the Sauvie Island quadrangle, Multnomah and Columbia Counties, Oregon, and Clark County, Washington

Introduction The Sauvie Island 7.5' quadrangle is situated in the Puget-Willamette Lowland northwest of downtown Portland, Oreg. This lowland, which extends from Puget Sound to west-central Oregon, is a complex structural and topographic trough between the Coast Range and the Cascade Range. Since late Eocene time, the Cascade Range has been the locus of a discontinuously active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range, which occupies the fore-arc position within the Cascadia arc-trench system, consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Sauvie Island quadrangle lies along the southwest margin of the Portland Basin, a 2,000-km 2 topographic and structural depression. The basin boundary is an abrupt topographic break at the base of the Tualatin Mountains, which separates the Portland and Tualatin Basins. The Tualatin Mountains are underlain by lava flows of the Miocene Columbia River Basalt Group that have been folded into an asymmetric anticline. Oligocene marine sedimentary rocks, not exposed at the surface, are inferred to underlie the basalt flows. The abrupt basin boundary marks the location of the northwest-striking Portland Hills Fault Zone, which is probably an active structure. The Columbia River flows west and north through the Portland Basin at nearly sea level. The Willamette River enters the Columbia near the southeast corner of the map area. Seismic-reflection profiles and lithologic logs of water wells show as much as 550 m of late Miocene and younger sediments in the deepest part of the basin east of the quadrangle. Deposits exposed at the surface consist chiefly of Holocene and late Pleistocene fluvial and eolian sediments and man-made fill. This map contributes to a U.S. Geological Survey program to improve the geologic database for the Portland region of the Pacific Northwest urban corridor. The map and ancillary data will support assessments of seismic risk, ground-failure hazards, and resource availability.

Oregon, Washington

Preliminary results of a binational research cruise in the Western Arctic Ocean

This paper is a condensed version of a report on the preliminary results of a research cruise under the direction of the U. S. Geological Survey, on board the United States Coast Guard Cutter Polar Star to Northwind Ridge and Canada Basin of the Western Arctic Ocean, during the period August 16‐September 15, 1993. Major objectives of the cruise were to: survey the geology of the North‐wind Ridge and Canada Basin; determine whether radionuclide contamination from disposal of solid and liquid nuclear wastes by the former Soviet Union in the Kara and Barents seas had penetrated the North American Arctic; acquire sediment cores in support of research on the history of glaciation in the region; and gain a better understanding of water structure and currents, sea‐ice physics, and sediment and nutrient transport.

Arctic Ocean, Canada Basin, Northwind Ridge

Nearshore wave-induced cyclical flexing of sea cliffs

[1] Evolution of a tectonically active coast is driven by geomorphically destructive energy supplied by ocean waves. Wave energy is episodic and concentrated; sea cliffs are battered by the geomorphic wrecking ball every 4-25 s. We measure the response of sea cliffs to wave assault by sensing the ground motion using near-coastal seismometers. Sea cliffs respond to waves in two distinct styles. High-frequency motion (20 Hz) reflects the natural frequency of the sea cliff as it rings in response to direct wave impact. Low-frequency motion in the 0.1-0.05 Hz (10-20 s) band consistently agrees with the dominant nearshore wave period. Integrating microseismic velocities suggests 50 ??m and 10 ??m displacements in horizontal and vertical directions, respectively. Displacement ellipsoids exhibit simultaneous downward and seaward sea cliff motion with each wave. Video footage corroborates the downward sea cliff flex in response to the imposed water load on the wave cut platform. Gradients in displacement amplitudes documented using multiple seismometers suggest longitudinal and shear strain of the flexing sea cliff on the order of 0.5-4 ?? strains during each wave loading cycle. As this sea cliff flexure occurs approximately 3 million times annually, it has the potential to fatigue the rock through cyclical loading. Local sea cliff retreat rates of 10 cm/yr imply that a given parcel of rock is flexed through roughly 109 cycles of increasing amplitude before exposure to direct wave attack at the cliff face. Copyright 2005 by the American Geophysical Union.

Journal of Geophysical Research F: Earth Surface

Barkley Canyon gas hydrates: A synthesis based on two decades of seafloor observation and remote sensing

Barkley Canyon is one of the few known sites worldwide with the occurrence of thermogenic gas seepage and formation of structure-II and structure-H gas hydrate mounds on the seafloor. This site is the location of continuous seafloor monitoring as part of the Ocean Networks Canada (ONC) cabled observatory off the west coast off Vancouver Island, British Columbia, Canada. We combine repeat remotely operated vehicle (ROV) seafloor video observations, mapping with an autonomous underwater vehicle (AUV), ship-, ROV-, and AUV-based identification of gas flares, as well as seismic and Chirp data to investigate the distribution of fluid migration pathways. Geologically, the site with the prominent gas hydrate mounds and associated fluid seepage is covering an area of ∼0.15 km 2 and is situated on a remnant of a rotated fault block that had slipped off the steep flanks of the north-east facing canyon wall. The gas hydrate mounds, nearly constant in dimension over the entire observation period, are associated with gas and oil seepage and surrounded by debris of chemosynthetic communities and authigenic carbonate. The formation of gas hydrate at and near the seafloor requires additional accommodation space created by forming blisters at the seafloor that displace the regular sediments. An additional zone located centrally on the rotated fault block with more diffuse seepage (∼0.02 km 2 in extent) has been identified with no visible mounds, but with bacterial mats, small carbonate concretions, and clam beds. Gas venting is seen acoustically in the water column up to a depth of ∼300 m. However, acoustic water-column imaging during coring and ROV dives showed rising gas bubbles to much shallower depth, even <50 m, likely a result of degassing of rising oil droplets, which themselves cannot be seen acoustically. Combining all observations, the location of the gas hydrate mounds is controlled by a combination of fault-focused fluid migration from a deeper reservoir and fluid seepage along more permeable strata within the rotated slope block. Fluids must be provided continuously to allow the sustained presence of the gas hydrate mounds at the seafloor.

Barkley Canyon

What the cliffs near America’s earliest settlements tell us about climate change

Climate change is a big problem for natural habitats, people, and the systems that support society, including roads, water supply, electrical grids, and phone and internet connections. It’s an important theme in politics, economics, and culture. Scientists make computer models to show what the climate might be like in the future, and it looks very different from what we are used to. Scientists can also learn about the future climate by looking at geological records from the past. About 3 million years ago, most of the US east coast was under water. Sediments that collected on the ocean floor show what the ocean environment was like back then. Some of these sediments are now exposed above water as bluffs along the James River near colonial Jamestown in southeastern Virginia, and they hold many clues as to what Earth may look like in the future.

Virginia

National shoreline change—Summary statistics of shoreline change from the 1800s to the 2010s for the coast of California

Rates of shoreline change have been updated for the open-ocean sandy coastline of California as part of studies conducted by the U.S. Geological Survey. Shorelines from the original assessment (1800s through 1998 or 2002), as well as additional shoreline position data from 2009 to 2011, 2015, and 2016 extracted from light detection and ranging (lidar) data, were used to compute long-term rates (approximately 150 years) that incorporate the proxy-datum bias on a transect-by-transect basis. The proxy-datum bias accounts for the unidirectional onshore bias of proxy-based high water line shorelines relative to datum-based mean high water shorelines. In areas where the methods for delineating shorelines did not make it possible to compute a bias correction, the rates are reported without that correction. In this study, the coasts of northern and central California exhibited the highest average rates of erosion, whereas southern California exhibited the highest average rate of accretion. The maximum erosion rate was in San Mateo County in central California. The maximum rate of accretion was in Humboldt County in northern California. Rates were calculated at 19,063 transect locations. Shoreline positions from the mid-1800s through 2016 were used to update shoreline change rates in California using the Digital Shoreline Analysis System (DSAS) software.

California

Far field tsunami simulations of the 1755 Lisbon earthquake: Implications for tsunami hazard to the U.S. East Coast and the Caribbean

The great Lisbon earthquake of November 1st, 1755 with an estimated moment magnitude of 8.5-9.0 was the most destructive earthquake in European history. The associated tsunami run-up was reported to have reached 5-15??m along the Portuguese and Moroccan coasts and the run-up was significant at the Azores and Madeira Island. Run-up reports from a trans-oceanic tsunami were documented in the Caribbean, Brazil and Newfoundland (Canada). No reports were documented along the U.S. East Coast. Many attempts have been made to characterize the 1755 Lisbon earthquake source using geophysical surveys and modeling the near-field earthquake intensity and tsunami effects. Studying far field effects, as presented in this paper, is advantageous in establishing constraints on source location and strike orientation because trans-oceanic tsunamis are less influenced by near source bathymetry and are unaffected by triggered submarine landslides at the source. Source location, fault orientation and bathymetry are the main elements governing transatlantic tsunami propagation to sites along the U.S. East Coast, much more than distance from the source and continental shelf width. Results of our far and near-field tsunami simulations based on relative amplitude comparison limit the earthquake source area to a region located south of the Gorringe Bank in the center of the Horseshoe Plain. This is in contrast with previously suggested sources such as Marqu??s de Pombal Fault, and Gulf of C??diz Fault, which are farther east of the Horseshoe Plain. The earthquake was likely to be a thrust event on a fault striking ~ 345?? and dipping to the ENE as opposed to the suggested earthquake source of the Gorringe Bank Fault, which trends NE-SW. Gorringe Bank, the Madeira-Tore Rise (MTR), and the Azores appear to have acted as topographic scatterers for tsunami energy, shielding most of the U.S. East Coast from the 1755 Lisbon tsunami. Additional simulations to assess tsunami hazard to the U.S. East Coast from possible future earthquakes along the Azores-Iberia plate boundary indicate that sources west of the MTR and in the Gulf of Cadiz may affect the southeastern coast of the U.S. The Azores-Iberia plate boundary west of the MTR is characterized by strike-slip faults, not thrusts, but the Gulf of Cadiz may have thrust faults. Southern Florida seems to be at risk from sources located east of MTR and South of the Gorringe Bank, but it is mostly shielded by the Bahamas. Higher resolution near-shore bathymetry along the U.S. East Coast and the Caribbean as well as a detailed study of potential tsunami sources in the central west part of the Horseshoe Plain are necessary to verify our simulation results. ?? 2008 Elsevier B.V.

Marine Geology