USGS Science⌕ Search

SEARCH · USGS Science

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79Linked to original sources
USGS1971

Geochemical, aeromagnetic, and generalized geologic maps showing distribution and abundance of gold and copper, Golconda and Iron Point quadrangles, Humboldt County, Nevada

Detailed geologic and geochemical studies of the four 7 1/2-minute quadrangles that make up the Edna Mountain 15-minute quadrangle in Humboldt County, Nevada, were begun during the 1969 summer field season. The objectives of the project are to map the geology of this structurally complex area at 1:24,000 scale and to determine the regional distribution and abundance of metals in rocks of the area and the factors that control the distribution and abundance of those metals. Tungsten-bearing hot-spring tufa, metalliferous black shale in Ordovician rocks, base-metal and barite deposits in Paleozoic sedimentary rocks, and copper-molybdenum in granodiorite plutons of Cretaceous age occur in the Edna Mountain area. None of these deposits have been of much economic signigicance, although tungsten was mined from the hot-spring deposits during World War II.

Nevada↗
USGS2003

Geology of Paleozoic Rocks in the Upper Colorado River Basin in Arizona, Colorado, New Mexico, Utah, and Wyoming, Excluding the San Juan Basin

The geology of the Paleozoic rocks in the Upper Colorado River Basin in Arizona, Colorado, New Mexico, Utah, and Wyoming, was studied as part of the U.S. Geological Survey's Regional Aquifer-System Analysis Program to provide support for hydrogeological interpretations. The study area is segmented by numerous uplifts and basins caused by folding and faulting that have recurred repeatedly from Precambrian to Cenozoic time. Paleozoic rocks in the study area are 0-18,000 feet thick. They are underlain by Precambrian igneous, metamorphic, and sedimentary rocks and are overlain in most of the area by Triassic formations composed mostly of shale. The overlying Mesozoic and Tertiary rocks are 0-27,000 feet thick. All Paleozoic systems except the Silurian are represented in the region. The Paleozoic rocks are divisible into 11 hydrogeologic units. The basal hydrogeologic unit consisting of Paleozoic rocks, the Flathead aquifer, predominantly is composed of Lower to Upper Cambrian sandstone and quartzite. The aquifer is 0-800 feet thick and is overlain gradationally to unconformably by formations of Cambrian to Mississippian age. The Gros Ventre confining unit consists of Middle to Upper Cambrian shale with subordinate carbonate rocks and sandstone. The confining unit is 0-1,100 feet thick and is overlain gradationally to unconformably by formations of Cambrian to Mississippian age. The Bighom aquifer consists of Middle Cambrian to Upper Ordovician limestone and dolomite with subordinate shale and sandstone. The aquifer is 0-3,000 feet thick and is overlain unconformably by Devonian and Mississipplan rocks. The Elbert-Parting confining unit consists of Lower Devonian to Lower Mississippian limestone, dolomite, sandstone, quartzite, shale, and anhydrite. It is 0-700 feet thick and is overlain conformably to unconformably by Upper Devonian and Mississippian rocks. The Madison aquifer consists of two zones of distinctly different lithology. The lower (Redwall-Leadville) zone is 0-2,500 feet thick and is composed almost entirely of Upper Devonian to Upper Mississippian limestone, dolomite, and chert. The overlying (Darwin-Humbug) zone is 0-800 feet thick and consists of Upper Mississippian limestone, dolomite, sandstone, shale, gypsum, and solution breccia. The Madison aquifer is overlain conformably by Upper Mississippian and Pennsylvanian rocks. The Madison aquifer in most areas is overlain by Upper Mississippian to Middle Pennsylvanian rocks of the Four Comers confining unit. The lower part of this confining unit, the Belden-Molas subunit, consists of as much as 4,300 feet of shale with subordinate carbonate rocks, sandstone, and minor gypsum. The upper part of the confining unit, the Paradox-Eagle Valley subunit, in most places consists of as much as 9,700 feet of interbedded limestone, dolomite, shale, sandstone, gypsum, anhydrite, and halite. Locally, the evaporitic rocks are deformed into diapirs as much as 15,000 feet thick. The Four Corners confining unit is overlain gradationally to disconformably by Pennsylvanian rocks. The uppermost Paleozoic rocks comprise the Canyonlands aquifer, which is composed of three zones with distinctly different lithologies. The basal (Cutler-Maroon) zone consists of as much as 16,500 feet of Lower Pennsylvanian to Lower Permian sandstone, conglomerate, shale, limestone, dolomite, and gypsum. The middle (Weber-De Chelly) zone consists of as much as 4,000 feet of Middle Pennsylvanian to Lower Permian quartz sandstone with minor carbonate rocks and shale. The upper (Park City-State Bridge) zone consists of as much as 800 feet of Lower to Upper Permian limestone, dolomite, shale, sandstone, phosphorite, chert, and gypsum. The Canyonlands aquifer is overlain disconformably to unconformably by formations of Triassic and Jurassic age.

Professional Paper↗
USGS2013

Zirconium

Zirconium is the 20th most abundant element in the Earth’s crust. It occurs in a variety of rock types and geologic environments but most often in igneous rocks in the form of zircon (ZrSiO 4 ). Zircon is recovered as a coproduct of the mining and processing of heavy mineral sands for the titanium minerals ilmenite and rutile. The sands are formed by the weathering and erosion of rock containing zircon and titanium heavy minerals and their subsequent concentration in sedimentary systems, particularly in coastal environments. A small quantity of zirconium, less than 10 kt/a (11,000 stpy), compared with total world production of 1.4 Mt (1.5 million st) in 2012, was derived from the mineral baddeleyite (ZrO 2 ), produced from a single source in Kovdor, Russia.

Mining Engineering↗
USGS2011

Geologic framework and hydrogeology of the middle Carson River Basin, Eagle, Dayton, and Churchill Valleys, West-Central Nevada

Changes in land use and water use and increasing development of water resources in the middle Carson River basin may affect flow of the river and, in turn, affect downstream water users dependent on sustained river flows to Lahontan Reservoir. The U.S. Geological Survey, in cooperation with the Bureau of Reclamation, began a study in 2008 of the middle Carson River basin, extending from Eagle Valley to Churchill Valley. Various types of geologic and hydrologic data were compiled from previous studies, collected for this study, and compiled and analyzed to provide a framework for development of a numerical model of the groundwater and surface-water flow systems of the basin. Geologic units that are assumed to have similar hydrologic characteristics were grouped into hydrogeologic units comprised of consolidated rocks of pre-Cenozoic age that underlie a unit of consolidated volcanic rock and semi-consolidated sediments of Tertiary age. The principal aquifer in the study area is comprised of unconsolidated sediments of Quaternary age. The Quaternary sediments include alluvial fan, fluvial, and lake sediments, and were grouped into a basin-fill hydrogeologic unit that overlies the pre-Cenozoic and Tertiary hydrologic units. The thickness of the combined section of Tertiary volcanic and sedimentary rocks and Quaternary basin-fill deposits previously was estimated to range from zero where pre-Cenozoic rocks are exposed to greater than 10,000 feet in the Bull Canyon subbasin, and greater than 6,000 feet on the western side of Churchill Butte and beneath the Desert Mountains. The thickness of Quaternary basin-fill sediments was estimated using gravity data and lithologic descriptions from driller’s logs. The most permeable parts of basin-fill sediments are greater than 1,000 feet thick in the Carson Plains subbasin, greater than 800 feet and 600 feet thick in the western and northeastern parts of the Stagecoach subbasin, and greater than 1,000 feet and 800 feet thick in the northern and southern parts of Churchill Valley, respectively. The distribution of aquifer properties was estimated for basin-fill sediments using slug-test and aquifer test data, and the lithologic descriptions of previously mapped geologic units. Slug-test data show hydraulic conductivity is greater than 10 to greater than 100 feet per day for fluvial sediments near the flood plain, less than 10 feet per day for basin-fill sediments outside the flood plain, and less than 1 foot per day for consolidated rocks. Estimates of transmissivity exceed 20,000 feet squared per day near the Carson River in Dayton, Churchill, and western Lahontan Valleys and in the northern part of the Stagecoach subbasin, and exceed 10,000 feet squared per day in the western part of Churchill Valley. A transmissivity of 90,000 feet squared per day was estimated from results of an aquifer test in the Carson Plains subbasin, indicating that permeable gravel and cobble zones at depths greater than 400 feet supplied water to the pumping well. Estimates of specific yield ranged from less than 1 to 2 percent for most consolidated rocks, from 1 to 15 percent for semi-consolidated Tertiary sediments, and from 10 to 40 percent for unconsolidated basin-fill sediments. Water-level altitude maps based on measurements at about 300 wells in 2009 show water levels have declined as much as 70 feet since 1964 on the northwestern side of Eagle Valley, about 10 feet since 1995 near Dayton in the Carson Plains subbasin, and from 5 to 10 feet since 1982 in the western and northeastern parts of the Stagecoach subbasin and the northwestern part of Churchill Valley. The declines are likely the result of municipal and agricultural pumping. The maps show a groundwater divide between the Carson Plains and Stagecoach subbasins, and a continuous hydraulic gradient between the Stagecoach subbasin and Churchill Valley. Groundwater flow directions are uncertain beneath parts of the boundary of Churchill Valley. The altitude of the top of pre-Cenozoic rocks shows thick sections of saturated Tertiary rocks and sediments south of the Dead Camel Mountains and beneath the eastern part of the Desert Mountains through which groundwater flow between Churchill Valley, Mason Valley, and Lahontan Valley may take place. North of Lahontan reservoir, beneath the Dead Camel Mountains, and beneath the southern part of Adrian Valley, the altitude of pre-Cenozoic rocks indicates groundwater flow between the three valleys is minimal. Streamflow measurements, supported by data on the deuterium content and specific conductance of surface-water samples, indicate a loss of Carson River streamflow in the Riverview subbasin, streamflow gains in the Moundhouse subbasin and the eastern part of the Carson Plains subbasin, and streamflow losses in the Bull Canyon subbasin. Comparisons of fluctuations in groundwater levels to those in stream stage in the Carson Plains subbasin indicate that streamflow lost to infiltration from the Carson River, from irrigation ditches, and from irrigated fields is an important source of groundwater recharge. Fluctuations in groundwater levels compared with the stage of Lahontan Reservoir in Churchill Valley indicate losses to infiltration from the reservoir during high stage and groundwater seepage to the reservoir during low stage.

Nevada↗
USGS1972

Reconnaissance geology of the Precambrian rocks in the Wadi Mahraghah quadrangle, Kingdom of Saudi Arabia

The Wadi Mahraghah quadrangle covers an area of 2863 sq km at the eastern edge of the Precambrian Shield in Saudi Arabia. Precambrian rocks are exposed in the western quarter of the quadrangle. To the east the Precambrian rocks are overlain by limestone of Permian age and by Quaternary sand and gravel. The Precambrian rocks consist of granite intruded by a swarm of andesite dikes. These igneous rocks are overlain by sedimentary formations of the Precambrian Murdama Group comprising conglomerate of the Z'reiba Formation which grades upward into graywacke of the Abt Formation. Rhyolite dikes intrude the Abt. Possibly owing to these rhyolite dikes, or possibly as a result of weak mineralization along west-northwest- and east-trending faults related to the Najd fault zone, the area underlain by graywacke and conglomerate is characterized by threshold or anomalous amounts of beryllium in samples of wadi sand. Samples of sand from granitic areas contain threshold amounts of barium and lanthanum, but none is anomalous, no ancient mine nor other megascoplc evidence of mineralization was found; however,

Open-File Report↗
USGS1991

Geology of the Ishmas gold district, Kingdom of Saudi Arabia

The Ishmas gold district was mapped at 1:25,000 scale to place auriferous mineralization into geologic perspective, to assist in creating an ore-deposit model, and to aid in devising a strategy for subsequent exploration elsewhere in the Jabal Ishmas-Wadi Tathlith gold belt. The precratonic evolution of the district began with the deposition of a tholeiitic mafic volcanic and volcaniclastic sequence that was intruded by diabase and gabbro. Basaltic to rhyodacitic volcanism following a calc-alkaline evolutionary trend ensued. Subsequent deposition of a thick wacke and sandstone unit represented the final phase in the volcano sedimentary accumulation. The emplacement of a large lopolithic layered-gabbro complex marked the end of the precratonic evolutionary cycle. The district coincides with the boundary of two allochthonous terranes. The collisional Nabitah orogeny represents the suturing of the two terranes. The effects of this event are manifested by numerous north-trending, steeply dipping faults, shear zones, and mylonite belts, as well as diapiric serpentinite. During the waning stages of the orogeny, auriferous quartz pods were precipitated in dilatant structures within the north-trending shear zones by deep-seated circulating fluids. The emplacement of a tonalite stock was closely followed by the formation of N. 20°-35° W. -trending faults. These faults influenced the emplacement of dacite porphyry stocks and associated auriferous quartz veins. The auriferous veins are massive, tabular open-fracture fillings that are spatially, temporally, and genetically related to the dacite porphyry. The emplacement of a quartz monzodiorite stock was responsible for additional auriferous quartz vein mineralization that is almost exclusively hosted by the intrusion. A nearly random orientation of the veins indicates that no regional structure influenced their formation. The formation of a series of N. 60°-80° W -trending faults represents the final episode in the district's geologic history and corresponds to the cratonic reactivation that affected a large part of the Arabian Shield (that is, the Najd faulting event).

Open-File Report↗
USGS1962

Manganese in the United States, exclusive of Alaska and Hawaii

The manganese deposits in the United States (exclusive of Alaska and Hawaii) are shown on the accompanying map. The deposits have been divided into several genetic types distinguished on the map by symbols. The principal distinction is between syngenetic deposits, in which the manganese was deposited contemporaneously with the enclosing rocks, and epigenetic, in which manganese was introduced into sedimentary rocks after their deposition or into igneous rocks after solidification. Because hydrothermal, metamorphic, and particularly supergene processes modify and in places concentrate manganese minerals after deposition of the element, classification of many deposits is subject to uncertainties. A third category, deposits of unknown or uncertain origin, is therefore included also. Subdivisions of these principal categories are based on the geologic history subsequent to original accumulation of the syngenetic deposits, and on gross mineralogic nature of the epigenetic ones.

Mineral Investigations Resource Map↗
USGS2009

Sidescan-Sonar Imagery and Surficial Geologic Interpretations of the Sea Floor in Western Rhode Island Sound

The U.S. Geological Survey (USGS) and National Oceanic and Atmospheric Administration (NOAA) have been working together to interpret sea-floor geology along the northeastern coast of the United States. In 2004, the NOAA Ship RUDE completed survey H11322, a sidescan-sonar and bathymetric survey that covers about 60 square kilometers of the sea floor in western Rhode Island Sound. This report interprets sidescan-sonar and bathymetric data from NOAA survey H11322 to delineate sea-floor features and sedimentary environments in the study area. Paleozoic bedrock and Cretaceous Coastal Plain sediments in Rhode Island Sound underlie Pleistocene glacial drift that affects the distribution of surficial Holocene marine and transgressional sediments. The study area has three bathymetric highs separated by a channel system. Features and patterns in the sidescan-sonar imagery include low, moderate, and high backscatter; sand waves; scarps; erosional outliers; boulders; trawl marks; and dredge spoils. Four sedimentary environments in the study area, based on backscatter and bathymetric features, include those characterized by erosion or nondeposition, coarse-grained bedload transport, sorting and reworking, and deposition. Environments characterized by erosion or nondeposition and coarse-grained bedload transport are located in shallower areas and environments characterized by deposition are located in deeper areas; environments characterized by sorting and reworking processes are generally located at moderate depths.

Open-File Report↗
USGS2011

Notes on interpretation of geophysical data over areas of mineralization in Afghanistan

Afghanistan has the potential to contain substantial metallic mineral resources. Although valuable mineral deposits have been identified, much of the country’s potential remains unknown. Geophysical surveys, particularly those conducted from airborne platforms, are a well-accepted and cost-effective method for obtaining information on the geological setting of a given area. This report summarizes interpretive findings from various geophysical surveys over selected mineral targets in Afghanistan, highlighting what existing data tell us. These interpretations are mainly qualitative in nature, because of the low resolution of available geophysical data. Geophysical data and simple interpretations are included for these six areas and deposit types: (1) Aynak: Sedimentary-hosted copper; (2) Zarkashan: Porphyry copper; (3) Kundalan: Porphyry copper; (4) Dusar Shaida: Volcanic-hosted massive sulphide; (5) Khanneshin: Carbonatite-hosted rare earth element; and (6) Chagai Hills: Porphyry copper.

Open-File Report↗
USGS2005

Hydrogeology of the Mogollon Highlands, central Arizona

The Mogollon Highlands, 4,855 square miles of rugged, mountainous terrain at the southern edge of the Colorado Plateau in central Arizona, is characterized by a bedrock-dominated hydrologic system that results in an incompletely integrated regional ground-water system, flashy streamflow, and various local water-bearing zones that are sensitive to drought. Increased demand on the water resources of the area as a result of recreational activities and population growth have made necessary an increased understanding of the hydrogeology of the region. The U.S. Geological Survey conducted a study of the geology and hydrology of the region in cooperation with the Arizona Department of Water Resources under the auspices of the Arizona Rural Watershed Initiative, a program launched in 1998 to assist rural areas in dealing with water-resources issues. The study involved the analysis of geologic maps, surface-water and ground-water flow, and water and rock chemical data and spatial relationships to characterize the hydrogeologic framework. The study area includes the southwestern corner of the Colorado Plateau and the Mogollon Rim, which is the eroded edge of the plateau. A 3,000- to 4,000-foot sequence of early to late Paleozoic sedimentary rocks forms the generally south-facing scarp of the Mogollon Rim. The area adjacent to the edge of the Mogollon Rim is an erosional landscape of rolling, step-like terrain exposing Proterozoic metamorphic and granitic rocks. Farther south, the Sierra Ancha and Mazatzal Mountain ranges, which are composed of various Proterozoic rocks, flank an alluvial basin filled with late Cenozoic sediments and volcanic flows. Eight streams with perennial to intermittent to ephemeral flow drain upland regions of the Mogollon Rim and flow into the Salt River on the southern boundary or the Verde River on the western boundary. Ground-water flow paths generally are controlled by large-scale fracture systems or by karst features in carbonate rocks. Stream channels are also largely controlled by structural features, such as regional joint or fault systems. Precipitation, which shows considerable variability in amount and intensity, recharges the ground-water system along the crest of the Mogollon Rim and to a lesser extent along the crests and flanks of the rim and the Mazatzal Mountains and Sierra Ancha. Flashy runoff in the mainly bedrock stream channels is typical. Springs are distributed throughout the region, typically discharging at or above the contact of variably permeable formations along the face of the Mogollon Rim with a scattering of low-discharge springs in the Proterozoic rocks below the rim. The surface of the Colorado Plateau is the primary recharge area for the C aquifer in which ground-water flows north toward the Little Colorado River and south toward the Mogollon Highlands. Within the study area, flow from the C aquifer primarily discharges from large, stable springs in the upper East Verde River, Tonto Creek, and Canyon Creek Basins along the top of the Mogollon Rim and to the west as base flow in West Clear Creek. On the basis of chemical evidence and the distribution and flow characteristics of springs and perennial streams, the C aquifer is also the source of water for the limestone aquifer that discharges from carbonate rocks near the base of the Mogollon Rim. Vertical flow from the C aquifer, the base of which is in the Schnebly Hill Formation, recharges the limestone aquifer that discharges mainly at Fossil Springs in the western part of the study area and as base flow in Cibecue Creek on the eastern edge of the study area. Local, generally shallow aquifers of variable productivity occur in plateau and mesa-capping basalts in the sedimentary rocks of the Schnebly Hill and Supai Formations, in fractured zones of the Proterozoic Payson granite, and in the alluvium of the lower Tonto Creek Basin. Where time series data exist, such water-bearing zones are shown to be sensitive to short-

Scientific Investigations Report↗
USGS2011

Assessing controls on perched saturated zones beneath the Idaho Nuclear Technology and Engineering Center, Idaho

Waste byproducts associated with operations at the Idaho Nuclear Technology and Engineering Center (INTEC) have the potential to contaminate the eastern Snake River Plain (ESRP) aquifer. Recharge to the ESRP aquifer is controlled largely by the alternating stratigraphy of fractured volcanic rocks and sedimentary interbeds within the overlying vadose zone and by the availability of water at the surface. Beneath the INTEC facilities, localized zones of saturation perched on the sedimentary interbeds are of particular concern because they may facilitate accelerated transport of contaminants. The sources and timing of natural and anthropogenic recharge to the perched zones are poorly understood. Simple approaches for quantitative characterization of this complex, variably saturated flow system are needed to assess potential scenarios for contaminant transport under alternative remediation strategies. During 2009-2011, the U.S. Geological Survey (USGS), in cooperation with the U.S. Department of Energy, employed data analysis and numerical simulations with a recently developed model of preferential flow to evaluate the sources and quantity of recharge to the perched zones. Piezometer, tensiometer, temperature, precipitation, and stream-discharge data were analyzed, with particular focus on the possibility of contributions to the perched zones from snowmelt and flow in the neighboring Big Lost River (BLR). Analysis of the timing and magnitude of subsurface dynamics indicate that streamflow provides local recharge to the shallow, intermediate, and deep perched saturated zones within 150 m of the BLR; at greater distances from the BLR the influence of streamflow on recharge is unclear. Perched water-level dynamics in most wells analyzed are consistent with findings from previous geochemical analyses, which suggest that a combination of annual snowmelt and anthropogenic sources (for example, leaky pipes and drainage ditches) contribute to recharge of shallow and intermediate perched zones throughout much of INTEC. The source-responsive fluxes model was parameterized to simulate recharge via preferential flow associated with intermittent episodes of streamflow in the BLR. The simulations correspond reasonably well to the observed hydrologic response within the shallow perched zone. Good model performance indicates that source-responsive flow through a limited number of connected fractures contributes substantially to the perched-zone dynamics. The agreement between simulated and observed perched-zone dynamics suggest that the source-responsive fluxes model can provide a valuable tool for quantifying rapid preferential flow processes that may result from different land management scenarios.

Scientific Investigations Report↗
USGS1956

Summary of reconnaissance for radioactive deposits in Alaska, 1945-1954, and an appraisal of Alaskan uranium possibilities

In the period 1945-1954 over 100 investigations for radioactive source materials were made in Alaska. The nature of these investigations ranged from field examinations of individual prospects or the laboratory analysis of significantly radioactive samples submitted by prospectors to reconnaissance studies of large districts. In this period no deposits of uranium or thorium that would warrant commercial exploitation were discovered. The investigations, however, disclosed that radioactive materials occur in widely scattered areas of Alaska and in widely diverse environments. Many igneous rocks throughout Alaska are weakly radioactive because of uranium- and thorium-bearing accessory minerals, such as allanite, apatite, monazite, sphene, xenotime, and zircon; more rarely the radioactivity of these rocks is due to thorianite or thorite and their uranoan varieties. The felsic rocks, for example, granites and syenites, are generally more radioactive than the mafic igneous rocks. Pegmatites, locally, have also proved to be radioactive, but they have little commercial significance. No primary uranium oxide minerals have been found yet in Alaskan vein deposits, except, perhaps, for a mineral tentatively identified as pitchblende in the Hyder district of southeastern Alaska. However, certain occurrences of secondary uranium minerals, chiefly those of the uranite group, on the Seward Peninsula, in the Russian Mountains, and in the vicinity of Kodiak suggest that pitchblende-type ores may occur at depth beneath zones of alteration. Thorite-bearing veins have been discovered on Prince of Wales Island in southeastern Alaska. Although no deposits or carnotite-type minerals have been found in Alaska, several samples containing such minerals have been submitted by Alaskan prospectors. Efforts to locate the deposits from which these minerals were obtained have been unsuccessful, but review of available geologic data suggests that several Alaskan areas are potentially favorable for carnotite-type deposits. The chief of these areas is the Alaska Peninsula-Cook Inlet area which encompasses most of the reported occurrences of the prospectors' carnotite-type samples. Alaska is also potentially favorable for the occurrence of large bodies of the very low-grade uraniferous sedimentary rocks, such as phosphorites and black shales. This type of deposit, however, has not received much study because of the emphasis on the search for bonanza-type high-grade ores. Uraniferous phosphorites similar to those of Idaho, Montana, and Wyoming occur in northern Alaska on the north flank of the Brooks Range; black shales comparable to the uraniferous shales of the Chattanooga formation of southeastern United States have been noted along the Yukon River near the international boundary. Placer deposits in Alaska have some small potential for the production of the radioactive elements as byproducts of gold- and tin-placer mining. the placer area believed to have the relatively greatest potential in Alaska lies in the Kahiltna River valley where concentrates are known to contain such commercial minerals as ilmenite, cassiterite, platinum, and gold in addition to uranothorianite and monazite. The possibilities of the natural fluids--water and petroleum--have not yet been tested in Alaska to any great extent. Studies of fluids are in progress to determine whether they may be used to discover and define areas potentially favorable for the occurrence of uraniferous lodes.

Alaska↗
USGS1956

Geology of the Ralston Buttes district, Jefferson County, Colorado: a preliminary report

The Ralston Buttes district in Jefferson County is one of the most significant new uranium districts located east of the Continental Divide in Colorado. The district is east of the Colorado Front Range mineral belt, along the east front of the range. From November 1953 through October 1956, about 10,000 tons of uranium ore, much of which was high-grade pitchblende-bearing vein material, was shipped from the district. The ore occurs in deposits that range in size from bodies containing less than 50 tons to ore shoots containing over 1,000 tons. The only other mining activity in the area has been a sporadic production of beryl, feldspar, and scrap mica from Precambrian pegmatites, and quarrying of dimension stone, limestone, and clay from sedimentary rocks. Most of the Ralston Buttes district consists of complexly folded Precambrian metamorphic and igneous rocks - gneiss, schist, quartzite, amphibolite, and granodiorite. Paleozoic and Mesozoic sedimentary rocks crop out in the northeastern part of the district. These rocks are cut by northwesterly-trending fault systems of Laramide age and by small bodies of intrusive rocks that are Tertiary in age. The typical uranium deposits in the district are hydrothermal veins occupying openings in Laramide fault breccias or related fractures that cut the Precambrian rocks. Pitchblende and lesser amounts of secondary uranium minerals are associated with sparse base-mental sulfides in a gangue of carbonate minerals, potash feldspar, and, more rarely, quartz. Less common types of deposits consist of pitchblende and secondary uranium minerals that occupy fractures cutting pegmatites and quartz veins. The uranium deposits are concentrated in two areas, the Ralston Creek area and the Golden Gate Canyon area. The deposits in the Ralston Creek area are located along the Rogers fault system, and the deposits in the Golden Gate Canyon area are along the Hurricane Hill fault system. Two geologic factors were important to the localization of the uranium deposits: (1) favorable structural environment and (2) favorable host rocks. The deposits in each of the two major areas are located where a northwesterly-trending Laramide fault system splits into a complex network of faults. Also, most of the deposits appear to be localized where the faults cut Precambrian rocks rich in hornblende, biotite, or garnet and biotite. The ore controls recognized in this relatively new uranium district may have wider application in areas of similar geology elsewhere in the Front Range.

Colorado↗
USGS2006

Siberian platform: Geology and natural bitumen resources

The Siberian platform is located between the Yenisey River on the west and the Lena River on the south and east. The Siberian platform is vast in size and inhospitable in its climate. This report is concerned principally with the setting, formation, and potential volumes of natural bitumen. In this report the volumes of maltha and asphalt referred to in the Russian literature are combined to represent natural bitumen. The generation of hydrocarbons and formation of hydrocarbon accumulations are discussed. The sedimentary basins of the Platform are described in terms of the Klemme basin classification system and the conditions controlling formation of natural bitumen. Estimates of in-place bitumen resources are reviewed and evaluated. If the bitumen volume estimate is confined to parts of identified deposits where field observations have verified rock and bitumen grades values, the bitumen resource amounts to about 62 billion barrels of oil in-place. However, estimates of an order of magnitude larger can be obtained if additional speculative and unverified rock volumes and grade measures are included.

Open-File Report↗
USGS2018

Processes and facies relationships in a Lower(?) Devonian rocky shoreline depositional environment, East Lime Creek Conglomerate, south‐western Colorado, USA

Rocky shorelines are relatively common features along modern coastlines, but few have been recognized in the geological record. The hard substrates of rocky shorelines telescope the width of offshore marine environments, thus the diagnostic deposits observed in such settings today have a low preservation potential due to small accommodation space and high‐energy conditions. This study recognized previously overlooked, laterally extensive Lower(?) Devonian rocky shoreline deposits in the San Juan Mountains of south‐western Colorado. The newly defined lithostratigraphic unit, the East Lime Creek Conglomerate (ELCC), is 0–23 m thick, unconformably overlying Proterozoic crystalline rocks and unconformably overlain by the Upper Devonian Ignacio Formation and/or Elbert Formation. The unit mostly consists of clast‐supported cobble‐boulder conglomerate with rounded quartzite clasts up to 1.4 m in length interbedded with thin sandstone layers and lenses. Sandstones in the ELCC are distinguished from unconformably overlying Upper Devonian sedimentary rocks because they have sericite cements. Most importantly, there are buttressing relationships between the ELCC and underlying Proterozoic crystalline rocks interpreted as palaeo‐sea cliffs, palaeo‐wave‐cut platforms and palaeo‐tombolos. A proposed rocky shoreline facies model includes headlands with upper shoreface‐beachface tabular cobble‐boulder gravels sourced from rock fall talus, nearshore subaqueous debris‐flow deposits and intervening pocket beaches with imbricated, stratified pebble‐cobble gravel sheets. Palaeocurrent data ( n = 338) from clast long‐axis orientations, imbrication and cross‐bedding indicate south‐to‐north transport roughly onshore‐offshore to a coastline consisting of alternating rocky headlands and pocket beaches. This Lower(?) Devonian unit documents a previously unrecognized episode in the geological history of south‐western Colorado.

Colorado↗
USGS2011

High geologic slip rates since early Pleistocene Initiation of the San Jacinto and San Felipe fault zones in the San Andreas fault system: southern California, USA

The San Jacinto right-lateral strike-slip fault zone is crucial for understanding plate-boundary dynamics, regional slip partitioning, and seismic hazards within the San Andreas fault system of southern California, yet its age of initiation and long-term average slip rate are controversial. This synthesis of prior and new detailed studies in the western Salton Trough documents initiation of structural segments of the San Jacinto fault zone at or slightly before the 1.07-Ma base of the Jaramillo subchron. The dextral faults changed again after ca. 0.5–0.6 Ma with creation of new fault segments and folds. There were major and widespread basinal changes in the early Pleistocene when these new faults cut across the older West Salton detachment fault. We mapped and analyzed the complex fault mesh, identified structural segment boundaries along the Clark, Coyote Creek, and San Felipe fault zones, documented linkages between the major dextral faults, identified previously unknown active strands of the Coyote Creek fault 5 and 8 km NE and SW of its central strands, and showed that prior analyses of these fault zones oversimplify their complexity. The Clark fault is a zone of widely distributed faulting and folding SE of the Santa Rosa Mountains and unequivocally continues 20–25 km SE of its previously inferred termination point to the San Felipe Hills. There the Clark fault zone has been deforming basinal deposits at an average dextral slip rate of ≥10.2 +6.9/−3.3 mm/yr for ~0.5–0.6 m.y. Five new estimates of displacement are developed here using offset successions of crystalline rocks, distinctive marker beds in the late Cenozoic basin fill, analysis of strike-slip–related fault-bend folds, quantification of strain in folds at the tips of dextral faults, and gravity, magnetic, and geomorphic data sets. Together these show far greater right slip across the Clark fault than across either the San Felipe or Coyote Creek faults, despite the Clark fault becoming “hidden” in basinal deposits at its SE end as strain disperses onto a myriad of smaller faults, strike-slip ramps and flats, transrotational systems of cross faults with strongly domain patterns, and a variety of fault-fold sets. Together the Clark and Buck Ridge–Santa Rosa faults accumulated ~16.8 +3.7/−6.0 km of right separation in their lifetime near Clark Lake. The Coyote Ridge segment of the Coyote Creek fault accumulated ~3.5 ± 1.3 km since roughly 0.8–0.9 Ma. The San Felipe fault accumulated between 4 and 12.4 km (~6.5 km preferred) of right slip on its central strands in the past 1.1–1.3 Ma at Yaqui and Pinyon ridges. Combining the estimates of displacement with ages of fault initiation indicates a lifetime geologic slip rate of 20.1 +6.4/−9.8 mm/yr across the San Jacinto fault zone (sum of Clark, Buck Ridge, and Coyote Creek faults) and about ~5.4 +5.9/−1.4 mm/yr across the San Felipe fault zone at Yaqui and Pinyon ridges. The NW Coyote Creek fault has a lifetime slip rate of ~4.1 +1.9/−2.1 mm/yr, which is a quarter of that across the Clark fault (16.0 +4.5/−9.8 mm/yr) nearby. The San Felipe fault zone is not generally regarded as an active fault in the region, yet its lifetime slip rate exceeds those of the central and southern Elsinore and the Coyote Creek fault zones. The apparent lower slip rates across the San Felipe fault in the Holocene may reflect the transfer of strain to adjacent faults in order to bypass a contractional bend and step at Yaqui Ridge. The San Felipe, Coyote Creek, and Clark faults all show evidence of major structural adjustments after ca. 0.6–0.5 Ma, and redistribution of strain onto new right- and left-lateral faults and folds far removed from the older central fault strands. Active faults shifted their locus and main central strands by as much as 13 km in the middle Pleistocene. These changes modify the entire upper crust and were not localized in the thin sedimentary basin fill, which is only a few kilometers thick in most of the western Salton Trough. Steep microseismic alignments are well developed beneath most of the larger active faults and penetrate basement to the base of the seismogenic crust at 10–14 km. We hypothesize that the major structural and kinematic adjustments at ca. 0.5–0.6 Ma resulted in major changes in slip rate within the San Jacinto and San Felipe fault zones that are likely to explain the inconsistent slip rates determined from geologic (1–0.5 m.y.; this study), paleoseismic, and geodetic studies over different time intervals. The natural evolution of complex fault zones, cross faults, block rotation, and interactions within their broad damage zones might explain all the documented and implied temporal and spatial variation in slip rates. Co-variation of slip rates among the San Jacinto, San Felipe, and San Andreas faults, while possible, is not required by the available data. Together the San Jacinto and San Felipe fault zones have accommodated ~25.5 mm/yr since their inception in early Pleistocene time, and were therefore slightly faster than the southern San Andreas fault during the same time interval. If the westward transfer of plate motion continues in southern California, the southern San Andreas fault in the Salton Trough may change from being the main plate boundary fault to defining the eastern margin of the growing Sierra Nevada microplate, as implied by other workers.

California↗
USGS1996

Hydrogeology of, and simulation of ground-water flow in, a mantled carbonate-rock system, Cumberland Valley, Pennsylvania

The U.S. Geological Survey conducted a study in a highly productive and complex regolith-mantled carbonate valley in the northeastern part of the Cumberland Valley, Pa., as part of its Appalachian Valleys and Piedmont Regional Aquifer-system Analysis program. The study was designed to quantify the hydrogeologic characteristics and understand the ground-water flow system of a highly productive and complex thickly mantled carbonate valley. The Cumberland Valley is characterized by complexly folded and faulted carbonate bedrock in the valley bottom, by shale and graywacke to the north, and by red-sedimentary and diabase rocks in the east-southeast. Near the southern valley hillslope, the carbonate rock is overlain by wedge-shaped deposit of regolith, up to 450 feet thick, that is composed of residual material, alluvium, and colluvium. Locally, saturated regolith is greater than 200 feet thick. Seepage-run data indicate that stream reaches, near valley walls, are losing water from the stream, through the regolith, to the ground-water system. Results of hydrograph-separation analyses indicate that base flow in stream basins dominated by regolith-mantled carbonate rock, carbonate rock, and carbonate rock and shale are 81.6, 93.0, and 67.7 percent of total streamflow, respectively. The relative high percentage for the regolith-mantled carbonate-rock basin indicates that the regolith stores precipitation and slowly, steadily releases this water to the carbonate-rock aquifer and to streams as base flow. Anomalies in water-table gradients and configuration are a result of topography and differences in the character and distribution of overburden material, permeability, rock type, and geologic structure. Most ground-water flow is local, and ground water discharges to nearby springs and streams. Regional flow is northeastward to the Susquehanna River. Average-annual water budgets were calculated for the period of record from two continuous streamflow-gaging stations. Average-annual precipitation range from 39.0 to 40.5 inches, and averages about 40 inches for the model area. Average-annual recharge, which was assumed equal to the average-annual base flow, ranged from 12 inches for the Conodoguinet Creek, and 15 inches for the Yellow Breeches Creek. The thickly-mantled carbonate system was modeled as a three- dimensional water-table aquifer. Recharge to, ground-water flow through, and discharge from the Cumberland Valley were simulated. The model was calibrated for steady-state conditions using average recharge and discharge data. Aquifer horizontal hydraulic conductivity was calculated from specific-capacity data for each geologic unit in the area. Particle-tracking analyses indicate that interbasin and intrabasin flows of groundwater occur within the Yellow Breeches Creek Basin and between the Yellow Breeches and Conodoguinet Creek Basins.

Pennsylvania↗
USGS1992

Bedrock geology and mineral resources of the Knoxville 1° x 2° quadrangle, Tennessee, North Carolina, and South Carolina

The Knoxville 1° x 2° quadrangle spans the Southern Blue Ridge physiographic province at its widest point from eastern Tennessee across western North Carolina to the northwest corner of South Carolina. The quadrangle also contains small parts of the Valley and Ridge province in Tennessee and the Piedmont province in North and South Carolina. Bedrock in the Valley and Ridge consists of unmetamorphosed, folded and thrust-faulted Paleozoic miogeoclinal sedimentary rocks ranging in age from Cambrian to Mississippian. The Blue Ridge is a complex of stacked thrust sheets divided into three parts: (1) a west flank underlain by rocks of the Late Proterozoic and Early Cambrian Chilhowee Group and slightly metamorphosed Late Proterozoic Ocoee Supergroup west of the Greenbrier fault; (2) a central part containing crystalline basement of Middle Proterozoic age (Grenville), Ocoee Supergroup rocks east of the Greenbrier fault, and rocks of the Murphy belt; and (3) an east flank containing the Helen, Tallulah Falls, and Richard Russell thrust sheets and the amphibolitic basement complex. All of the east flank thrust sheets contain polydeformed and metamorphosed sedimentary and igneous rocks of mostly Proterozoic age. The Blue Ridge is separated by the Brevard fault zone from a large area of rocks of the Inner Piedmont to the east, which contains the Six Mile thrust sheet and the ChaugaWalhalla thrust complex. All of these rocks are also polydeformed and metamorphosed sedimentary and igneous rocks. The Inner Piedmont rocks in this area occupy both the Piedmont and part of the Blue Ridge physiographic provinces. The intensity of deformation and metamorphism increases from west to east in the Blue Ridge. The west flank is mostly chlorite grade or relatively unmetamorphosed, and the central part of the Blue Ridge is mostly staurolite, garnet, or biotite grade, although sillimanite grade rocks occur along the eastern part of the central Blue Ridge in the vicinity of the leading edge of the Hayesville fault. The east flank of the Blue Ridge and much of the Inner Piedmont are at kyanite or sillimanite grade of regional metamorphism except for a zone of retrograde rocks in the Brevard fault zone and a small area of biotite-grade rocks in the extreme southwest part of the Grandfather Mountain window in the northeast corner of the quadrangle. The major mineral resources in the Knoxville 1° x 2° quadrangle are construction materials and a variety of industrial minerals mostly related to either granite and pegmatite or ultramafic rocks. Past production in the quadrangle of metals, which are of secondary importance relative to construction materials and industrial minerals, include copper in massive sulfides of the Besshi type, gold-bearing quartz veins, and residual iron and manganese deposits. Resources are discussed in relation to the Valley and Ridge, Blue Ridge, and Piedmont provinces. The following resources are the most important: A. Construction materials: Dimension stone of the Tennessee marble district in the Valley and Ridge. Limestone and dolomite of the Valley and Ridge. Sand and gravel and crushed stone, widespread throughout the quadrangle. B. Industrial minerals: Feldspar, flake mica, and quartz produced by flotation methods from the Spruce Pine Alaskite (muscovite granodiorite) in the east flank of the Blue Ridge. The district produces about half of the U.S. feldspar and significant amounts of the U.S. flake mica. Olivine produced from alpine-type dunite bodies in the east flank of the Blue Ridge. Talc and marble from the Murphy belt in the central part of the Blue Ridge. Vermiculite produced from a large deposit near Tigerville, S.C., in the Inner Piedmont. Deposit worked out and mine backfilled. Smaller deposits associated with ultramafic rocks in the east flank of the Blue Ridge are now uneconomic and have not been worked in the past 20 years. C. Metals: Copper in three deposits, the Fontana and Hazel Creek mines in the Great Smoky Mountains National Park in the Central Blue Ridge, and the Cullowhee mine in the east flank of the Blue Ridge. D. Organic fuels: The rocks of the quadrangle contain no coal and probably lie outside the maximum range in thermal maturity permitting the survival of oil. The rocks in the Valley and Ridge and for a short distance eastward below the west flank of the Blue Ridge probably lie within a zone of thermal maturity permitting the survival of natural gas. Consequently the western part of the quadrangle is an area of high risk for hydrocarbon exploration. No exploration drilling has been done in this belt.

North Carolina, South Carolina, Tennessee↗