USGS Science⌕ Search

SEARCH · USGS Science

Results for “Marine Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79Linked to original sources

The use of vertical seismic profiles in seismic investigations of the earth

During the past 8 years, the U.S. Geological Survey has conducted an extensive investigation on the use of vertical seismic profiles (VSP) in a variety of seismic exploration applications. Seismic sources used were surface air guns, vibrators, explosives, marine air guns, and downhole air guns. Source offsets have ranged from 100 to 7800 ft. Well depths have been from 1200 to over 10,000 ft. We have found three specific ways in which VSPs can be applied to seismic exploration. First, seismic events observed at the surface of the ground can be traced, level by level, to their point of origin within the earth. Thus, one can tie a surface profile to a well log with an extraordinarily high degree of confidence. Second, one can establish the detectability of a target horizon, such as a porous zone. One can determine (either before or after surface profiling) whether or not a given horizon or layered sequence returns a detectable reflection to the surface. The amplitude and character of the reflection can also be observed. Third, acoustic properties of a stratigraphic sequence can be measured and sometimes correlated to important exploration parameters. For example, sometimes a relationship between apparent attenuation and sand percentage can be established. The technique shows additional promise of aiding surface exploration indirectly through studies of the evolution of the seismic pulse, studies of ghosts and multiples, and studies of seismic trace inversion techniques. Nearly all current seismic data‐processing techniques are adaptable to the processing of VSP data, such as normal moveout (NMO) corrections, stacking, single‐and multiple‐channel filtering, deconvolution, and wavelet shaping.

Geophysics↗

Storm-influenced deltaic deposits of the Middle Jurassic Gaikema Sandstone in a measured section on the northern Iniskin Peninsula, Cook Inlet basin, Alaska

Middle Jurassic strata of the Gaikema Sandstone were deposited about 170 million years ago on a delta that was located on the western shoreline of the Cook Inlet basin (Detterman and Hartsock, 1966; LePain and others, 2011, 2013). The delta was built by swift, sediment-laden rivers that flowed southeastward from a mountainous volcanic terrane west of the Bruin Bay fault (fig. 6-1). Upon reaching the edge of the Jurassic sea, the rivers dumped abundant sand, gravel, and mud into a depocenter on the northern Iniskin Peninsula, about 240 km southwest of Anchorage (figs. 6-1, 6-2). This report provides a preliminary description and interpretation of a detailed, 34-m-thick measured section in the Gaikema Sandstone on the south shore of Chinitna Bay at latitude 59.816°N, longitude 153.168°W (figs. 6-1–6-3). The sandstone in this measured section exhibits hummocky cross lamination and other features suggestive of storm-influenced deposition on the shallow-marine, seaward margin of the Gaikema delta. Our field studies of the Gaikema Sandstone were conducted during 2013 and 2014 as part of a collaborative effort by the Alaska Division of Geological & Geophysical Surveys (DGGS), Alaska Division of Oil and Gas (DOG), and U.S. Geological Survey (USGS) to provide the public with reliable information on the geologic framework and petroleum resource potential of Cook Inlet basin (Gillis, 2013, 2014). Jurassic rocks in Cook Inlet, including the Gaikema Sandstone, are of economic interest because they could contain significant undiscovered petroleum resources (Bureau of Ocean Energy Management, 2011; Stanley and others, 2011a, 2011b, 2013a; LePain and others, 2013).

Alaska↗

Vulnerability of coastal wetlands in the Southeastern United States: climate change research results, 1992-97

As part of the USGCRP research framework on coastal lands and ecosystems, the Biological Resources Division of the U.S. Geological Survey (National Wetlands Research Center) entered into partnership with Rice University, Louisiana State University, Duke University, Clemson University, University of Southwestern Louisiana, University of Georgia, and the Virginia Institute of Marine Studies (University of Virginia ) to (1) document the current state vulnerability of coastal ecosystems including an assessment of past changes in land cover, (2) develop an understanding of the processes which underlie these changes, and (3) predict the extent of future alterations to these habitats and the consequences for the sustainability of the resource and land base. This document summarized the initial findings of our collaborative efforts. Overall, the studies exemplify an integrated approach addressing questions at the species, community, and landscape levels of organization and focusing on factors related to hydroperiod, sea-level rise, disturbance events, and coastal marsh submergence.

Biological Science Report↗

Geologic map of the Riverside West 7.5' quadrangle, Riverside County, California

Open-File Report 01-451 contains a digital geologic map database of the Riverside West 7.5’ quadrangle, Riverside County, California that includes: ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. A PostScript file to plot the geologic map on a topographic base, containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in rsw_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f.Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗

Arsenic in New Jersey Coastal Plain streams, sediments, and shallow groundwater: effects from different geologic sources and anthropogenic inputs on biogeochemical and physical mobilization processes

Arsenic (As) concentrations in New Jersey Coastal Plain streams generally exceed the State Surface Water Quality Standard (0.017 micrograms per liter (&micro;g/L)), but concentrations seldom exceed 1 &micro;g/L in filtered stream-water samples, regardless of geologic contributions or anthropogenic inputs. Nevertheless, As concentrations in unfiltered stream water indicate substantial variation because of particle inputs from soils and sediments with differing As contents, and because of discharges from groundwater of widely varying chemistry. In the Inner Coastal Plain, streams draining to lower reaches of the Delaware River traverse As-rich glauconitic sediments of marine origin in which As contents typically are about 20 milligrams per kilogram (mg/kg) or greater. In some of these sedimentary units, As concentrations exceed the New Jersey drinking-water maximum contaminant level (5 &micro;g/L) in shallow groundwater that discharges to streams. Microbes, fueled by organic carbon beneath the streambed, reduce iron (Fe) and As, releasing As and Fe into solution in the shallow groundwater from geologic materials that likely include (in addition to glauconite) other phyllosilicates, apatite, and siderite. When the groundwater discharges to the stream, the dissolved Fe and As are oxidized, the Fe precipitates as a hydroxide, and the As sorbs or co-precipitates with the Fe. Because of the oxidation/precipitation process, dissolved As concentrations measured in filtered stream waters of the Inner Coastal Plain are about 1 &micro;g/L, but the total As concentrations (and loads) are greater, substantially amplified by As-bearing suspended sediment in stormflows. In the Outer Coastal Plain, streams draining to the Atlantic Ocean traverse quartz-rich sediments of mainly deltaic origin where the As content generally is low (<8 mg/kg). In unfiltered and filtered water samples, As concentrations typically are less than 1 &micro;g/L in the acidic stream water and groundwater of the Outer Coastal Plain, but are greater in waters from urban areas. Despite the generally small geologic contributions to Outer Coastal Plain groundwater, where wastewater inputs were indicated, concentrations of As in unfiltered shallow groundwater discharging to small urban streams exceeded the maximum contaminant level. With a history of agriculture in the New Jersey Coastal Plain, anthropogenic inputs of As, such as residues from former pesticide applications in soils, can amplify any geogenic As in runoff. Such inputs contribute to an increased total As load to a stream at high stages of flow. As a result of yet another anthropogenic influence, microbes that reduce and mobilize As beneath the streambeds are stimulated by inputs of dissolved organic carbon (DOC). Although DOC is naturally occurring, anthropogenic contributions from wastewater inputs may deliver increased levels of DOC to subsurface soils and ultimately groundwater. Arsenic concentrations may increase with the increases in pH of groundwater and stream water in developed areas receiving wastewater inputs, as As mobilization caused by pH-controlled sorption and desorption reactions are likely to occur in waters of neutral or alkaline pH (for example, Nimick and others, 1998; Barringer and others, 2007b). Because of the difference in As content of the geologic materials in the two sub-provinces of the Coastal Plain, the amount of As that is mobile in groundwater and stream water is, potentially, substantially greater in the Inner Coastal Plain than in the Outer Coastal Plain. In turn, streams within the Inner and Outer Coastal Plain can receive substantially more As in groundwater discharge from developed areas than from environments where DOC appears to be of natural origin.

New Jersey↗

Geologic map of the Lake Mathews 7.5' quadrangle, Riverside County, California

Open-File Report 01-479 contains a digital geologic map database of the Lake Mathews 7.5’ quadrangle, Riverside County, California that includes: ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. A PostScript file to plot the geologic map on a topographic base, containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in lkm_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Miscellaneous Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous.Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand.In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f. Even though this is an Open-File report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗

Geologic map of the Corona North 7.5' quadrangle, Riverside and San Bernardino Counties, California

Open-File Report 02-22 contains a digital geologic map database of the Corona North 7.5’ quadrangle, Riverside and San Bernardino Counties, California that includes: ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. A Postscript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in crn_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced precise 1:24,000- scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗

Geologic map of the Steele Peak 7.5' quadrangle, Riverside County, California

Open-File Report 01-449 contains a digital geologic map database of the Steele Peak 7.5’ quadrangle, Riverside County, California that includes: ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. A Postscript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in stp_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗

Geologic map of the Sunnymead 7.5' quadrangle, Riverside County, California

Open-File Report 01-450 contains a digital geologic map database of the Sunnymead 7.5’ quadrangle, Riverside County, California that includes: ARC/INFO (Environmental Systems Research Institute, http:/www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. A Postscript file to plot the geologic map on a topographic base, containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in sun_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗

Geologic map of the Riverside East 7.5' quadrangle, Riverside County, California

Open-File Report 01-452 contains a digital geologic map database of the Riverside East 7.5’ quadrangle, Riverside County, California that includes: ARC/INFO Environmental Systems Research Institute (http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. A Postscript file to plot the geologic map on a topographic base, containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in rse_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗

Geologic map of the Corona South 7.5' quadrangle, Riverside and Orange counties, California

Open-File Report 01-021 contains a digital geologic map database of the Corona South 7.5’ quadrangle, Riverside County, California that includes: 1. ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. 2. A Postscript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. 3. Portable Document Format (.pdf) files of: a. A Readme file; includes in Appendix I, data contained in crs_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Marine deposits are in part overlain by local, mostly alluvial fan, deposits and are labeled Qomf. Grain size follows f. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

California↗

Campanian coastal plain sediments in southeastern Missouri and southern Illinois - Significance to the early geologic history of the northern Mississippi Embayment

Basal Cretaceous deposits in the northernmost part of the Mississippi Embayment in southeastern Missouri and southern Illinois have been correlated previously with the Tuscaloosa Formation of Alabama. New palynological data indicate that these clastic deposits comprise non-marine and marine sections of middle to late Campanian age. They consist of a lower non-marine deposit, the herein newly proposed Post Creek Formation, and an upper marine deposit that we correlate in part with the Coffee Sand of Tennessee. These Campanian deposits overlie a diachronous Mesozoic paleosol, Little Bear Formation, and are progressively overlain by the McNairy Sand of early to middle Maastrichtian age, the Owl Creek Formation of middle to late Maastrichtian age, and the Porters Creek Clay of late Paleocene age. Outcrops and subsurface occurrences of the Post Creek Formation are widespread around the northern margin of the Mississippi Embayment. In contrast, the Coffee Sand is more restricted in distribution, and is present in southeast Missouri only as an outlier. Extensive occurrences of the Coffee Sand are found in Tennessee and further south in the embayment. This study shows that (1) the basal Cretaceous deposits in the northern Mississippi Embayment are not equivalent to the Tuscaloosa Formation, but are entirely separate stratigraphic units, (2) the shallow Cretaceous Interior Seaway occupied the northernmost part of the present Mississippi Embayment by the late Campanian, and (3) a large part of the northern embayment may have experienced an episode of uplift and erosion during the latest Campanian or earliest Maastrichtian, prior to deposition of McNairy Sand. ?? 1997 Academic Press Limited.

Illinois, Missouri↗

Buried Triassic basin in the central Savannah River area, South Carolina and Georgia

A basin filled with Triassic red beds, located on the South Carolina–Georgia line ∼32 km southeast of Augusta, Georgia, is buried beneath ∼350 m of Coastal Plain sediments. An extensive aeromagnetic survey, seismic refraction and reflection surveys, and geophysical logs and samples from three wells define the extent and character of the basin. This basin, herein named the Dunbarton Triassic basin, is ∼50 km long, 10 km wide, and trends northeast. The northwest margin of the basin is well defined by the aeromagnetic survey, a seismic reflection traverse, and a well that passed through 485 m of Triassic fanglomerate before entering the crystalline metamorphic rocks below. Near the center of the Triassic basin, a well passed through 902 m of maroon Triassic mudstone and sandstone of fluvial origin without penetrating the bottom of the basin. The permeability of the Triassic rock is extremely low, and water-transmitting fractures were not penetrated. Even slight water-level disturbances in the Triassic wells require many years to recover. Total dissolved solids of the water from the Triassic basin are about twice that in the crystalline metamorphic rocks that surround it. The inferred geologic history of this basin is similar to the history of Triassic basins that crop out in North Carolina.

Georgia, South Carolilna↗

Bacterial sulfur disproportionation constrains timing of neoproterozoic oxygenation

Various geochemical records suggest that atmospheric O 2 increased in the Ediacaran (635–541 Ma), broadly coincident with the emergence and diversification of large animals and increasing marine ecosystem complexity. Furthermore, geochemical proxies indicate that seawater sulfate levels rose at this time too, which has been hypothesized to reflect increased sulfide oxidation in marine sediments caused by sediment mixing of the newly evolved macrofauna. However, the exact timing of oxygenation is not yet understood, and there are claims for significant oxygenation prior to the Ediacaran. Furthermore, recent evidence suggests that physical mixing of sediments did not become important until the late Silurian. Here we report a multiple sulfur isotope record from a ca. 835–630 Ma succession from Svalbard, further supported by data from Proterozoic strata in Canada, Australia, Russia, and the United States, in order to investigate the timing of oxygenation. We present isotopic evidence for onset of globally significant bacterial sulfur disproportionation and reoxidative sulfur cycling following the 635 Ma Marinoan glaciation. Widespread sulfide oxidation helps to explain the observed first-order increase in seawater sulfate concentration from the earliest Ediacaran to the Precambrian-Cambrian boundary by reducing the amount of sulfur buried as pyrite. Expansion of reoxidative sulfur cycling to a global scale also indicates increasing environmental O 2 levels. Thus, our data suggest that increasing atmospheric O 2 levels may have played a role in the emergence of the Ediacaran macrofauna and increasing marine ecosystem complexity.

Geology↗

Offshore gas hydrate sample database with an overview and preliminary analysis

Synopsis -- A database of offshore gas hydrate samples was constructed from published observations and measurements. More than 90 samples from 15 distinct regions are represented in 13 data categories. This database has permitted preliminary description of gas hydrate (chiefly methane hydrate) tendencies and associations with respect to their geological environment. Gas hydrates have been recovered from offshore sediment worldwide and from total depths (water depth plus subseabed depth) ranging from 500 m to nearly 6,000 m. Samples have come from subbottom depths ranging from 0 to 400 m. Various physiographic provinces are represented in the data set including second order landforms such as continental margins and deep-sea trenches, and third order forms such as submarine canyons, continental slopes, continental margin ridges and intraslope basins. There is a clear association between fault zones and other manifestations of local, tectonic-related processes, and hydrate-bearing sediment. Samples of gas hydrate frequently consist of individual grains or particles. These types of hydrates are often further described as inclusions or disseminated in the sediment. Moreover, hydrates occur as a cement, as nodules, or as layers (mostly laminae) or in veins. The preponderance of hydrates that could be characterized as 2- dimensional (planar) were associated with fine sediment, either as intercalated layers or in fractures. Hydrate cements were commonly associated with coarser sediment. Hydrates have been found in association with grain sizes ranging from clay through gravel. More hydrates are associated with the more abundant finer-grained sediment than with coarser sediment, and many were discovered in the presence of both fine (silt and clay) and coarse sediment. The thickness of hydrate zones (i. e., sections of hydrate-bearing sediment) varies from a few centimeters to as much as 30 m. In contrast, the thickness of layers of pure hydrate or the dimensions of individual hydrate grains were most often characterized in terms of millimeters or centimeters, although a pure hydrate layer discovered in the Middle America Trench off Guatemala was as much as 3-4-m-thick. The data suggest that grains, or thin veins or laminae of pure gas hydrate may be ubiquitous in many hydrate zones but that typically they may only comprise a minor component of the thicker zones. In more than 80 percent of the hydrate samples the methane was of biogenic origin. The methane in the remainder was either classified as (or may be at least part) thermogenic. Each site where thermogenic gas was identified is characterized by faults or other manifestions of a dynamic geological environment (e.g., diapirs, mud volcanoes, gas seeps). Every sample in the database came from within the zone of theoretical methane hydrate stability, as determined on the basis of assumed regional pressure and temperature gradients. Most show that they were situated --- expressed in terms of depth --- well above the phase boundary and about 70% of the samples were located more than 100 m above the assumed regional position of that boundary. The calculated subseabed positions of the phase boundaries and the BSRs (bottom simulating reflector) are essentially identical. This may be taken as general corroboration of the regional phase boundary calculations and the concept of the BSR. Three provocative aspects of marine gas hydrates have been disclosed by the database: gas hydrates are frequently situated at much shallower subseabed depths than the assumed contemporary position of the regional phase boundary hydrates are often found in areas typified by faults or other indicators of a dynamic geological environment zones of gas hydrate-bearing sediment tend to be tens of centimeters to tens of meters thick but the hydrate within the thicker zones tends to be only a minor constituent. Whether existing as dispersed particles, cements, or pure layers or vein

Open-File Report↗

U.S. Geological Survey assessment of global potash production and resources—A significant advancement for global development and a sustainable future.

During the past 15 yr, the global requirement for fertilizers has grown considerably, mainly due to demand by a larger and wealthier world population for more and higher-quality food. The demand and price for potash as a primary fertilizer ingredient have increased in tandem, because of the necessity to increase the quantity and quality of food production on the decreasing amount of available arable land. The primary sources of potash are evaporates, which occur mainly in marine salt basins and a few brine-bearing continental basins. World potash resources are large, but distribution is inequitable and not presently developed in countries where population and food requirements are large and increasing. There is no known substitute for potash in fertilizer, so knowledge of the world’s potash resources is critical for a sustainable future. The U.S. Geological Survey recently completed a global assessment of evaporite-hosted potash resources, which included a geographic information system–based inventory of known potash resources. This assessment included permissive areas or tracts for undiscovered resources at a scale of 1:1,000,000. Assessments of undiscovered potash resources were conducted for a number of the world’s evaporite-hosted potash basins. The data collected provide a major advance in our knowledge of global potash resources that did not exist prior to this study. The two databases include: (1) potash deposits and occurrences, and (2) potash tracts (basins that contain these deposits and occurrences and potentially undiscovered potash deposits). Data available include geology, mineralogy, grade, tonnage, depth, thickness, areal extent, and structure, as well as numerous pertinent references.

GSA Special Papers↗

Climatic-eustatic control of Holocene nearshore parasequence development, southeastern Texas coast

Sediment cores, seismic profiles, radiocarbon dates, and faunal assemblages were used to interpret the depositional setting and geological evolution of the southeastern Texas coast during the last glacio-eustatic cycle. Discrete lithofacies and biofacies zones in the ebb-dominated Sabine Lake estuary and adjacent chenier plain record alternating periods of rapid marine flooding and gradual shoaling related to linked climatic/eustatic fluctuations. Monospecific zones of the mollusks Rangia cuneata and Crassostrea virginica, respectively, indicate high fresh water outflow followed by invasion of marine water, whereas intervening organic-rich zones record bayhead delta deposition. High-frequency parasequence stacking patterns within the valley fill and across the adjacent interfluve reflect an initial rapid rise in sea level about 9 ka that flooded abandoned alluvial terraces and caused onlap of Holocene marsh in the incised valley. The rapid rise was followed by slowly rising and oscillating sea level that filled the deepest portions of the incised valleys with fluvially dominated estuarine deposits, and then a maximum highstand (+1 m msl) about 5 ka that flooded the former subaerial coastal plain between the incised valleys and constructed the highest beach ridges. Between 3.5 and 1.5 ka, sea level oscillated and gradually fell, causing a forced regression and rapid progradation of both the chenier plain and accretionary barrier islands. The only significant sands in the valley fill are (1) falling-stage and lowstand-fluvial sediments between the basal sequence boundary and transgressive surface unconformity, and (2) highstand beach-ridge sediments of the chenier plain.

Texas↗

On the fidelity of oxygen isotope-based sea level reconstructions: A case study of Marine Isotope Stage 3

Although foraminiferal oxygen isotope records (δ 18 O F ) have long been used to develop time-continuous estimates of past global ice volume, growing evidence indicates that the ice volume and temperature contributions to δ 18 O F diverge considerably over the last glacial cycle. Across Marine Isotope Stage 3 (MIS 3; 57 to 29 ka), estimates of peak global sea level based on δ 18 O F are ∼30 m lower than reconstructions based on recent glacial geology, geologic sea-level records, and glacial isostatic adjustment (GIA) modeling approaches. Here we address this mismatch by quantifying uncertainties in converting δ 18 O F to global sea level during MIS 3. We review the geochemical tools to assess the contributions of ocean temperature, diagenesis, and the isotopic composition of ice sheets to δ 18 O F records across MIS 3. We show that recent advances in our understanding of these and other factors that contribute uncertainty (e.g., global sea level during the Last Glacial Maximum) help to explain the MIS 3 gap between global sea level estimates based on δ 18 O F and GIA analyses of geologic sea-level records. We find that the accuracy and precision of MIS 3 ocean temperature reconstructions is likely a key contributor, and various MIS 3 temperature reconstructions can reduce the “gap” by 30%–70% (∼10–20 m). Future improvements in the precision of temperature reconstructions will better constrain the ice volume component of δ 18 O F records. Ultimately, assessing the fidelity of δ 18 O F as a proxy for global ice volume is key to disentangling the feedbacks between climate and ice sheets over the Pleistocene.

Paleoceanography and Paleoclimatology↗