USGS Science⌕ Search

SEARCH · USGS Science

Results for “Information Systems”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79Linked to original sources
USGS2002

Fifty-year flood-inundation maps for Siguatepeque, Honduras

After the devastating floods caused by Hurricane Mitch in 1998, maps of the areas and depths of the 50-year-flood inundation at 15 municipalities in Honduras were prepared as a tool for agencies involved in reconstruction and planning. This report, which is one in a series of 15, presents maps of areas in the municipality of Siguatepeque that would be inundated by 50-year floods on Rio Selguapa, Rio Guique, Rio Celan, Rio Calan, and Quebrada Chalantuma. Geographic Information System (GIS) coverages of the flood inundation are available on a computer in the municipality of Siguatepeque as part of the Municipal GIS project and on the Internet at the Flood Hazard Mapping Web page (http://mitchnts1.cr.usgs.gov/projects/floodhazard.html). These coverages allow users to view the flood inundation in much more detail than is possible using the maps in this report. Water-surface elevations for 50-year-floods on each of the streams studied were computed using HEC-RAS, a one-dimensional, steady-flow, step-backwater computer program. The channel and floodplain cross sections used in HEC-RAS were developed from an airborne light-detection-and-ranging (LIDAR) topographic survey of the area and ground surveys at six bridges. There are no nearby long-term stream-gaging stations on any of the streams studied; therefore, the 50-year-flood discharges were estimated using a regression equation that relates the 50-year-flood discharge to drainage area and mean annual precipitation. The 50-year-flood discharges estimated for Rio Selguapa, Rio Guique, Rio Celan, Rio Calan, and Quebrada Chalantuma are 323, 168, 161, 146, and 90 cubic meters per second, respectively.

Siguatepeque↗
USGS2002

Fifty-year flood-inundation maps for Sonaguera, Honduras

After the devastating floods caused by Hurricane Mitch in 1998, maps of the areas and depths of the 50-year-flood inundation at 15 municipalities in Honduras were prepared as a tool for agencies involved in reconstruction and planning. This report, which is one in a series of 15, presents maps of areas in the municipality of Sonaguera that would be inundated by a 50-year flood of Rio Sonaguera and its tributary, Rio Juan Lazaro. Geographic Information System (GIS) coverages of the flood inundation are available on a computer in the municipality of Sonaguera as part of the Municipal GIS project and on the Internet at the Flood Hazard Mapping Web page (http://mitchnts1.cr.usgs.gov/projects/floodhazard.html). These coverages allow users to view the flood inundation in much more detail than is possible using the maps in this report. Water-surface elevations for an estimated 50-year-flood on Rio Sonaguera and Rio Juan Lazaro at Sonaguera were determined using HEC-RAS, a one-dimensional, steady-flow, step-backwater computer program. The channel and floodplain cross sections used in HEC-RAS were developed from an airborne light-detection-and-ranging (LIDAR) topographic survey of the area and a ground survey at the bridge. There are no nearby long-term stream-gaging stations on Rio Sonaguera or Rio Juan Lazaro; therefore, the 50-year-flood discharge for Rio Sonaguera above the confluence with Rio Juan Lazaro, 194 cubic meters per second; for Rio Juan Lazaro at its mouth, 168 cubic meters per second, and for Rio Sonaguera at the downstream end of the study area, 282 cubic meters per second; were estimated using a regression equation that relates the 50-year-flood discharge to drainage area and mean annual precipitation.

Sonaguera↗
USGS2002

Fifty-year flood-inundation maps for Tegucigalpa, Honduras

After the devastating floods caused by Hurricane Mitch in 1998, maps of the areas and depths of the 50-year-flood inundation at 15 municipalities in Honduras were prepared as a tool for agencies involved in reconstruction and planning. This report, which is one in a series of 15, presents maps of areas in the municipality of Tegucigalpa that would be inundated by a 50-year flood of Rio Choluteca, Rio Grande, Rio Guacerique, and Rio Chiquito. Geographic Information System (GIS) coverages of the flood inundation are available on a computer in the municipality of Tegucigalpa as part of the Municipal GIS project and on the Internet at the Flood Hazard Mapping Web page (http://mitchnts1.cr.usgs.gov/projects/floodhazard.html). These coverages allow users to view the flood inundation in much more detail than is possible using the maps in this report. Water-surface elevations for an estimated 50-year-flood on Rio Choluteca, Rio Grande, Rio Guacerique, and Rio Chiquito at Tegucigalpa were determined using HEC-RAS, a one-dimensional, steady-flow, step-backwater computer program. The channel and floodplain cross sections used in HEC-RAS were developed from an airborne light-detection-and-ranging (LIDAR) topographic survey of the area and ground surveys at bridges. There are no nearby long-term stream-gaging stations; therefore, the 50-year-flood discharges were estimated using a regression equation that relates the 50-year-flood discharge to drainage area and mean annual precipitation. The estimated 50-year-flood discharge is 922 cubic meters per second at Rio Choluteca at downstream end of the study area boundary, 663 cubic meters per second at the mouth of the Rio Grande, 475 cubic meters per second at the mouth of the Rio Guacerique, and 254 cubic meters per second at the mouth of the Rio Chiquito.

Tegucigalpa↗
USGS2002

Fifty-year flood-inundation maps for Tocoa, Honduras

After the devastating floods caused by Hurricane Mitch in 1998, maps of the areas and depths of the 50-year-flood inundation at 15 municipalities in Honduras were prepared as a tool for agencies involved in reconstruction and planning. This report, which is one in a series of 15, presents maps of areas in the municipality of Tocoa that would be inundated by a 50-year flood of Rio Tocoa. Geographic Information System (GIS) coverages of the flood inundation are available on a computer in the municipality of Tocoa as part of the Municipal GIS project and on the Internet at the Flood Hazard Mapping Web page (http://mitchnts1.cr.usgs.gov/projects/floodhazard.html). These coverages allow users to view the flood inundation in much more detail than is possible using the maps in this report. Water-surface elevations for an estimated 50-year-flood on Rio Tocoa at Tocoa were estimated using HEC-RAS, a one-dimensional, steady-flow, step-backwater computer program. The channel and floodplain cross sections used in HEC-RAS were developed from an airborne light-detection-and-ranging (LIDAR) topographic survey of the area and a ground survey at one bridge. There are no nearby long-term stream-gaging stations on Rio Tocoa; therefore, the 50-year-flood discharge for Rio Tocoa, 552 cubic meters per second, was estimated using a regression equation that relates the 50-year-flood discharge to drainage area and mean annual precipitation. The drainage area and mean annual precipitation estimated for Rio Tocoa at Tocoa are 204 square kilometers and 1,987 millimeters, respectively. It was assumed that a portion of the 50-year flood, 200 cubic meters per second, would escape the main channel and flow down a side channel before re-entering the main channel again near the lower end of the study area.

Tocoa↗
USGS2003

Methods for quality-assurance review of water-quality data in New Jersey

This report is an instructional and reference manual that describes methods developed and used by the U.S. Geological Survey (USGS), New Jersey District, to assure the accuracy and precision of the results of analyses of surface- and ground-water samples received from analyzing laboratories and, ultimately, to ensure the integrity of water-quality data in USGS databases and published reports. A statistical-analysis computer program, COMP.PPL, is used to determine whether the values reported by the laboratories are internally consistent, whether they are reasonable when compared with values for samples previously collected at the same site, and whether they exceed applicable drinking-water regulations. The program output consists of three files -- QWREVIEW, QWOUTLIERS, and QWCALC. QWREVIEW presents the results of tests of chemical logic and shows values that exceed drinking-water regulations. QWOUTLIERS identifies values that fall outside the historical range of values for the site sampled. QWCALC shows values and calculations used for reference purposes. Because values that are identified by the program as questionable may or may not be in error, the reviewer looks at both qualitative and quantitative relations between analytes during the period of record and then uses technical judgement to decide whether to accept a questionable value or investigate further. Guidelines for, and the use of regression analysis in, making this decision are described. Instructions are given for requesting that the analyzing laboratory reanalyze a constituent or otherwise verify the reported value. If, upon reanalysis or verification, a value is still questionable, consideration must be given to deleting the value or marking the value in the USGS National Water Information System database as having been reviewed and rejected.

New Jersey↗
USGS2002

Spatial digital database for the geology of the San Pedro River Basin in Cochise, Gila, Graham, Pima, and Pinal Counties, Arizona

This spatial digital database for the geology of the San Pedro River Basin in southeastern Arizona was compiled from three maps by Dickinson (1993, 1998, 2000). Mylar originals of the map sheets were scanned, and the resultant images were rectified to a mathematically-generated set of latitude and longitude registration points. Geologic linework was digitized from the rectified images on screen using ArcView (ver. 3.2), and the resultant shapefiles were converted to ArcInfo (ver. 7.2) coverages. Lines and polygons were then attributed; and the files were merged omtp a single ArcInfo database (quib24k). This digital spatial database is one of many being created by the U.S. Geological Survey as an ongoing effort to provide geologic information in a geographic information system (GIS) for use in spatial analysis. This database can be queried in many ways to produce a variety of geologic maps. Digital base map data files (topography, roads, towns, rivers and lakes, etc.) are not included: they may be obtained from a variety of commercial and government sources. This database is not meant to be used or displayed at any scale larger than 1:24,000 (for example, 1:12,000). The map area is located in southeastern Arizona. This report describes the map units, the methods used to convert the geologic map data into a digital format, and the ArcInfo GIS file structures and relationships; and it explains how to download the digital files from the U.S. Geological Survey public access World Wide Web site on the Internet. See figures 2 and 3 for page-size versions of the map compilation.

Arizona↗
USGS2003

ERF1_2 -- Enhanced River Reach File 2.0

The digital segmented network based on watershed boundaries, ERF1_2, includes enhancements to the U.S. Environmental Protection Agency's River Reach File 1 (RF1) (USEPA, 1996; DeWald and others, 1985) to support national and regional-scale surface water-quality modeling. Alexander and others (1999) developed ERF1, which assessed the hydrologic integrity of the digital reach traces and calculated the mean water time-of-travel in river reaches and reservoirs. ERF1_2 serves as the foundation for SPARROW (Spatially Referenced Regressions (of nutrient transport) on Watershed) modeling. Within the context of a Geographic Information System, SPARROW estimates the proportion of watersheds in the conterminous U.S. with outflow concentrations of several nutrients, including total nitrogen and total phosphorus, (Smith, R.A., Schwarz, G.E., and Alexander, R.B., 1997). This version of the network expands on ERF1 (Version 1.2; Alexander, et al., 1999) and includes the incremental and total drainage area derived from 1-kilometer (km) elevation data for North America. Previous estimates of the water time-of-travel were recomputed for reaches with water-quality monitoring sites that included two reaches. The mean flow and velocity estimates for these split reaches are based on previous estimation methods (Alexander et al., 1999) and are unchanged in ERF1_2. Drainage area calculations provide data used to estimate the contribution of a given nutrient to the outflow. Data estimates depend on the accuracy of node connectivity. Reaches split at water-quality or pesticide-monitoring sites indicate the source point for estimating the contribution and transport of nutrients and their loads throughout the watersheds. The ERF1_2 coverage extends the earlier drainage area founded on the 1-kilometer data for North America (Verdin, 1996; Verdin and Jenson, 1996). A 1-kilometer raster grid of ERF1_2 projected to Lambert Azimuthal Equal Area, NAD 27 Datum (Snyder, 1987), was merged with the HYDRO1K flow direction data set (Verdin and Jenson, 1996) to generate a DEM-based watershed grid, ERF1_2WS_LG. The watershed boundaries are maintained in a raster (grid cell) format as well as a vector (polygon) format for subsequent model analysis. Both the coverage, ERF1_2, and the grid, ERF1_2WS_LG, are available at: URL:http://water.usgs.gov/lookup/getspatial?erf1_2

Open-File Report↗
USGS2002

Rationale and operational plan to upgrade the U.S. gravity database

A concerted effort is underway to prepare a substantially upgraded digital gravity anomaly database for the United States and to make this data set and associated usage tools available on the internet. This joint effort, spearheaded by the geophysics groups at the National Imagery and Mapping Agency (NIMA), University of Texas at El Paso (UTEP), U.S. Geological Survey (USGS), and National Oceanic and Atmospheric Administration (NOAA), is an outgrowth of the new geoscientific community initiative called Geoinformatics (www.geoinformaticsnetwork.org). This dominantly geospatial initiative reflects the realization by Earth scientists that existing information systems and techniques are inadequate to address the many complex scientific and societal issues. Currently, inadequate standardization and chaotic distribution of geoscience data, inadequate accompanying documentation, and the lack of easy-to-use access tools and computer codes for analysis are major obstacles for scientists, government agencies, and educators. An example of the type of activities envisioned, within the context of Geoinformatics, is the construction, maintenance, and growth of a public domain gravity database and development of the software tools needed to access, implement, and expand it. This product is far more than a high quality database; it is a complete data system for a specific type of geophysical measurement that includes, for example, tools to manipulate the data and tutorials to understand and properly utilize the data. On August 9, 2002, twenty-one scientists from the federal, private and academic sectors met at a workshop to discuss the rationale for upgrading both the United States and North American gravity databases (including offshore regions) and, more importantly, to begin developing an operational plan to effectively create a new gravity data system. We encourage anyone interested in contributing data or participating in this effort to contact G.R. Keller or T.G. Hildenbrand. This workshop was the first step in building a web-based data system for sharing quality gravity data and methodology, and it builds on existing collaborative efforts. This compilation effort will result in significant additions to and major refinement of the U.S. database that is currently released publicly by NOAA’s National Geophysical Data Center and will also include an additional objective to substantially upgrade the North American database, released over 15 years ago (Committee for the Gravity Anomaly Map of North America, 1987).

Open-File Report↗
USGS2002

Lithogeochemical character of near-surface bedrock in the New England coastal basins

This geographic information system (GIS) data layer shows the generalized lithologic and geochemical, termed lithogeochemical, character of near-surface bedrock in the New England Coastal Basin (NECB) study area of the U.S. Geological Survey's National Water Quality Assessment (NAWQA) Program. The area encompasses 23,000 square miles in western and central Maine, eastern Massachusetts, most of Rhode Island, eastern New Hampshire and a small part of eastern Connecticut. The NECB study area includes the Kennebec, Androscoggin, Saco, Merrimack, Charles, and Blackstone River Basins, as well as all of Cape Cod. Bedrock units in the NECB study area are classified into lithogeochemical units based on the relative reactivity of their constituent minerals to dissolution and the presence of carbonate or sulfide minerals. The 38 lithogeochemical units are generalized into 7 major groups: (1) carbonate-bearing metasedimentary rocks; (2) primarily noncalcareous, clastic sedimentary rocks with restricted deposition in discrete fault-bounded sedimentary basins of Mississipian or younger age; (3) primarily noncalcareous, clastic sedimentary rocks at or above biotite-grade of regional metamorphism; (4) mafic igneous rocks and their metamorphic equivalents; (5) ultramafic rocks; (6) felsic igneous rocks and their metamorphic equivalents; and (7) unconsolidated and poorly consolidated sediments.

Connecticut, Maine, Massachusetts, New Hampshire, ↗
USGS2002

Streamflow gain/loss in the Republican River basin, Nebraska, May 1975

This arc and point data set contains streamflow-measurement sites and reaches indicating streamflow gain or loss under base-flow conditions along Republican River tributaries in Dundy and Chase Counties, Nebraska during May 19 to 20, 1975 (U.S. Geological Survey, 1976). The streamflow measurements were made to obtain data on ground-water/surface-water interaction. Flow was observed visually to be zero, was measured, or was estimated at 55 sites. Tributaries were followed upstream until the first road crossing where zero flow was encountered. For selected streams, points of zero flow upstream of the first zero flow site also were checked. Streamflow gain or loss for each stream reach was calculated by subtracting the streamflow values measured at the upstream end of the reach and values for contributing tributaries from the downstream value. The data obtained reflected base-flow conditions suitable for estimating streamflow gains and losses for stream reaches between sites. This digital data set was created by manually plotting locations of streamflow measurements. These points were used to designate steam-reach segments to calculate gain/loss per river mile. Reach segments were created by manually splitting the lines from a 1:250,000-scale hydrography data set (Soenksen and others, 1999) at every location where the streams were measured. Each stream-reach segment between streamflow-measurement sites was assigned a unique reach number. All other lines in the hydrography data set without reach numbers were omitted. This data set was created to archive the calculated streamflow gains and losses of tributary streams to the Republican River in Dundy and Chase Counties, Nebraska, in May 1975, and make the data available for use with geographic information systems (GIS). If measurement sites are used separately from reaches, the maximum scale of 1:100,000 should not be exceeded. When used in conjunction with the reach segments, the maximum scale should not exceed 1:250,000.

Open-File Report↗
USGS2002

Streamflow gain/loss in the Republican River basin, Nebraska, July 1975

This arc and point data set contains streamflow-measurement sites and reaches indicating streamflow gain or loss under base-flow conditions along Republican River tributaries in Dundy and Chase Counties, Nebraska during July 14 to 18, 1975 (U.S. Geological Survey, 1976). The streamflow measurements were made to obtain data on ground-water/surface-water interaction. Flow was observed visually to be zero, was measured, or was estimated at 55 sites. Tributaries were followed upstream until the first road crossing where zero flow was encountered. For selected streams, points of zero flow upstream of the first zero flow site also were checked. Streamflow gain or loss for each stream reach was calculated by subtracting the streamflow values measured at the upstream end of the reach and values for contributing tributaries from the downstream value. The data obtained reflected base-flow conditions suitable for estimating streamflow gains and losses for stream reaches between sites. This digital data set was created by manually plotting locations of streamflow measurements. These points were used to designate stream-reach segments to calculate gain/loss per river mile. Reach segments were created by manually splitting the lines from a 1:250,000 hydrography data set (Soenksen and others, 1999) at every location where the streams were measured. Each stream-reach segment between streamflow-measurement sites was assigned a unique reach number. All other lines in the hydrography data set without reach numbers were omitted. This data set was created to archive the calculated streamflow gains and losses of tributary streams to the Republican River in Dundy and Chase Counties, Nebraska, in July 1975, and make the data available for use with geographic information systems (GIS). If measurement sites are used separately from reaches, the maximum scale of 1:100,000 should not be exceeded. When used in conjunction with the reach segments, the maximum scale should not exceed 1:250,000.

Open-File Report↗
USGS2002

Streamflow gain/loss in the Republican River basin, Nebraska, October 1975

This arc and point data set contains streamflow-measurement sites and reaches indicating streamflow gain or loss under base-flow conditions along Republican River tributaries in Dundy and Chase Counties, Nebraska during October 6 to 8, 1975 (U.S. Geological Survey, 1977). The streamflow measurements were made to obtain data on ground-water/surface-water interaction. Flow was observed visually to be zero, was measured, or was estimated at 64 sites. Tributaries were followed upstream until the first road crossing where zero flow was encountered. For selected streams, points of zero flow upstream of the first zero flow site also were checked. Streamflow gain or loss for each stream reach was calculated by subtracting the streamflow values measured at the upstream end of the reach and values for contributing tributaries from the downstream value. The data obtained reflected base-flow conditions suitable for estimating streamflow gains and losses for stream reaches between sites. This digital data set was created by manually plotting locations of streamflow measurements. These points were used to designate stream-reach segments to calculate gain/loss per river mile. Reach segments were created by manually splitting the lines from a 1:250,000 hydrography data set (Soenksen and others, 1999) at every location where the streams were measured. Each stream-reach segment between streamflow-measurement sites was assigned a unique reach number. All other lines in the hydrography data set without reach numbers were omitted. This data set was created to archive the calculated streamflow gains and losses of tributary streams to the Republican River in Dundy and Chase Counties, Nebraska, in October 1975, and make the data available for use with geographic information systems (GIS). If measurement sites are used separately from reaches, the maximum scale of 1:100,000 should not be exceeded. When used in conjunction with the reach segments, the maximum scale should not exceed 1:250,000.

Open-File Report↗
USGS2002

Streamflow gain/loss in the Republican River basin, Nebraska, October 1978

This arc and point data set contains streamflow-measurement sites and reaches indicating streamflow gain or loss under base-flow conditions along the Republican River and tributaries in Nebraska during October 10 to 18, 1978 (U.S. Geological Survey, 1980). The streamflow measurements were made to obtain data on ground-water/surface-water interaction. Flow was observed visually to be zero, was measured, or was estimated at 254 sites. The measurements were made on the main stem of the Republican River and all flowing tributaries that enter the Republican River between Swanson and Harlan County reservoirs in the Nebraska part of the Republican River Basin. Tributaries were followed upstream until the first road crossing where zero flow was encountered. For selected streams, points of zero flow upstream of the first zero flow site also were checked. Streamflow gain or loss for each stream reach was calculated by subtracting the streamflow values measured at the upstream end of the reach and values for contributing tributaries from the downstream value. The data obtained reflected base-flow conditions suitable for estimating streamflow gains and losses for stream reaches between sites. This digital data set was created by manually plotting locations of streamflow measurements. These points were used to designate stream-reach segments to calculate gain/loss per river mile. Reach segments were created by manually splitting the lines from a 1:250,000 hydrography data set (Soenksen and others, 1999) at every location where the streams were measured. Each stream-reach segment between streamflow-measurement sites was assigned a unique reach number. All other lines in the hydrography data set without reach numbers were omitted. This data set was created to archive the calculated streamflow gains and losses in part of the Republican River Basin, Nebraska, in October 1978, and make the data available for use with geographic information systems (GIS). If measurement sites are used separately from reaches, the maximum scale of 1:100,000 should not be exceeded. When used in conjunction with the reach segments, the maximum scale should not exceed 1:250,000.

Open-File Report↗
USGS2002

Streamflow gain/loss in the Republican River Basin, Nebraska, April to May 1980

This arc and point data set contains streamflow-measurement sites and reaches indicating streamflow gain or loss under base-flow conditions along Republican River tributaries in Nebraska during April 28 to May 1, 1980 (U.S. Geological Survey, 1981). The streamflow measurements were made to obtain data on ground-water/surface-water interaction. Flow was observed visually to be zero, was measured, or was estimated at 147 sites. The measurements were made on the main stem of the Republican River and all flowing tributaries that enter the Republican River between Muddy Creek in western Hitchcock County and Deer Creek in western Furnas County, Nebraska. Tributaries were followed upstream until the first road crossing where zero flow was encountered. For selected streams, points of zero flow upstream of the first zero flow site also were checked. Streamflow gain or loss for each stream reach was calculated by subtracting the streamflow values measured at the upstream end of the reach and values for contributing tributaries from the downstream value. The data obtained reflected base-flow conditions suitable for estimating streamflow gains and losses for stream reaches between sites. This digital data set was created by manually plotting locations of streamflow measurements. These points were used to designate stream-reach segments to calculate gain/loss per river mile. Reach segments were created by manually splitting the lines from a 1:250,000 hydrography data set (Soenksen and others, 1999) at every location where the streams were measured. Each stream-reach segment between streamflow-measurement sites was assigned a unique reach number. All other lines in the hydrography data set without reach numbers were omitted. This data set was created to archive the calculated streamflow gains and losses of selected streams in part of the Republican River Basin, Nebraska, in April and May 1980, and make the data available for use with geographic information systems (GIS). If measurement sites are used separately from reaches, the maximum scale of 1:100,000 should not be exceeded. When used in conjunction with the reach segments, the maximum scale should not exceed 1:250,000.

Open-File Report↗
USGS2002

Streamflow gain/loss in the Republican River basin, Nebraska, October 1980

This arc and point data set contains streamflow-measurement sites and reaches indicating streamflow gain or loss under base-flow conditions along the Republican River and tributaries in Nebraska during October 20 to 21, 1980 (U.S. Geological Survey, 1982). The streamflow measurements were made to obtain data on ground-water/surface-water interaction. Flow was observed visually to be zero, was measured, or was estimated at 118 sites. The measurements were made on the main stem of the Republican River and all flowing tributaries that enter the Republican River between Harlan County Reservoir and the Republican River near Hardy, Nebraska gaging station in part of the Republican River Basin, Nebraska. Tributaries were followed upstream until the first road crossing where zero flow was encountered. For selected streams, points of zero flow upstream of the first zero flow site also were checked. Streamflow gain or loss for each stream reach was calculated by subtracting the streamflow values measured at the upstream end of the reach and values for contributing tributaries from the downstream value. The data obtained reflected base-flow conditions suitable for estimating streamflow gains and losses for stream reaches between sites. This digital data set was created by manually plotting locations of streamflow measurements. These points were used to designate stream-reach segments to calculate gain/loss per river mile. Reach segments were created by manually splitting the lines from a 1:250,000 hydrography data set (Soenksen and others, 1999) at every location where the streams were measured. Each stream-reach segment between streamflow-measurement sites was assigned a unique reach number. All other lines in the hydrography data set without reach numbers were omitted. This data set was created to archive the calculated streamflow gains and losses of selected streams in part of the Republican River Basin, Nebraska, in October 1980, and make the data available for use with geographic information systems (GIS). If measurement sites are used separately from reaches, the maximum scale of 1:100,000 should not be exceeded. When used in conjunction with the reach segments, the maximum scale should not exceed 1:250,000.

Open-File Report↗
USGS2002

Streamflow gain/loss in the Republican River basin, Nebraska, October 1981

This arc and point data set contains streamflow-measurement sites and reaches indicating streamflow gain or loss under base-flow conditions along the Republican River and tributaries in Nebraska during October 19 to 20, 1981 (Engel and others, 1984). The streamflow measurements were made to obtain data on ground-water/surface-water interaction. Flow was observed visually to be zero, was measured, or was estimated at 105 sites. The measurements were made on the main stem of the Republican River and all flowing tributaries that enter the Republican River between Muddy Creek in western Furnas County and Harlan County Reservoir in the Nebraska part of the Republican River Basin. Tributaries were followed upstream until the first road crossing where zero flow was encountered. For selected streams, points of zero flow upstream of the first zero flow site were also checked. Streamflow gain or loss for each stream reach was calculated by subtracting the streamflow values measured at the upstream end of the reach and values for contributing tributaries from the downstream value. The data obtained reflected base-flow conditions suitable for estimating streamflow gains and losses for stream reaches between sites. This digital data set was created by manually plotting locations of streamflow measurements. These points were used to designate stream-reach segments to calculate gain/loss per river mile. Reach segments were created by manually splitting the lines from a 1:250,000 hydrography data set (Soenksen and others, 1999) at every location where the streams were measured. Each stream-reach segment between streamflow-measurement sites was assigned a unique reach number. All other lines in the hydrography data set without reach numbers were omitted. This data set was created to archive the calculated streamflow gains and losses of selected streams in the Republican River Basin, Nebraska, in October 1981, and make the data available for use with geographic information systems (GIS). If measurement sites are used separately from reaches, the maximum scale of 1:100,000 should not be exceeded. When used in conjunction with the reach segments, the maximum scale should not exceed 1:250,000.

Open-File Report↗
USGS2002

Streamflow gain/loss in the Republican River basin, Nebraska, March 1989

This arc and point data set contains streamflow measurement sites and reaches indicating streamflow gain or loss under base-flow conditions along the Republican River and tributaries in Nebraska during March 21 to 22, 1989 (Boohar and others, 1990). These measurements were made to obtain data on ground-water/surface-water interaction. Flow was visually observed to be zero, was measured, or was estimated at 136 sites. The measurements were made on the main stem of the Republican River and all flowing tributaries that enter the Republican River above Swanson Reservoir and parts of the Frenchman, Red Willow, and Medicine Creek drainages in the Nebraska part of the Republican River Basin. Tributaries were followed upstream until the first road crossing where zero flow was encountered. For selected streams, points of zero flow upstream of the first zero flow site were also checked. Streamflow gain or loss for each stream reach was calculated by subtracting the streamflow values measured at the upstream end of the reach and values for contributing tributaries from the downstream value. The data obtained reflected base-flow conditions suitable for estimating streamflow gains and losses for stream reaches between sites. This digital data set was created by manually plotting locations of streamflow measurements. These points were used to designate stream-reach segments to calculate gain/loss per river mile. Reach segments were created by manually splitting the lines from a 1:250,000 hydrography data set (Soenksen and others, 1999) at every location where the streams were measured. Each stream-reach segment between streamflow-measurement sites was assigned a unique reach number. All other lines in the hydrography data set without reach numbers were omitted. This data set was created to archive the calculated streamflow gains and losses of selected streams in part of the Republican River Basin, Nebraska in March 1989, and make the data available for use with geographic information systems (GIS). If measurement sites are used separately from reaches, the maximum scale of 1:100,000 should not be exceeded. When used in conjunction with the reach segments, the maximum scale should not exceed 1:250,000.

Open-File Report↗
USGS2002

Streamflow gain/loss in the Republican River Basin, Nebraska, October 1998

This arc and point data set contains streamflow-measurement sites and reaches indicating streamflow gain or loss under base-flow conditions along the Republican River and tributaries in Nebraska during October 25 to 28, 1998 (Boohar, 2000). The streamflow measurements were made to obtain data on ground-water/surface-water interaction. Flow was observed visually to be zero, was measured, or was estimated at 374 sites. The measurements were made on the main stem of the Republican River and all flowing tributaries that enter the Republican River between Swanson and Harlan County Reservoirs in the Nebraska part of the Republican River Basin. Tributaries were followed upstream until the first road crossing where zero flow was encountered. Measurements also included estimates of average wastewater discharge during the period when the flow measurements were made, based upon data obtained from towns having measureable wastewater discharge. For selected streams, points of zero flow upstream of the first zero flow site also were checked. Streamflow gain or loss for each stream reach was calculated by subtracting the streamflow values measured at the upstream end of the reach and values for contributing tributaries from the downstream value. The data obtained reflected base-flow conditions suitable for estimating streamflow gains and losses for stream reaches between sites. However, due to fluctuations in streamflow on the main stem of the Republican River above Swanson Reservoir during the measurement period, flow measurements on the main stem could not be used for calculating reach gains and losses. Flows measured on tributaries to the Republican River above Swanson Reservoir were of suitable quality to use for streamflow gain/loss calculations. Flows on Sappa Creek did not reflect base-flow conditions and thus were not suitable for investigating ground-water/surface-water interaction. This digital data set was created by manually plotting locations of streamflow measurements. These points were used to designate stream-reach segments to calculate gain/loss per river mile Reach segments were created by manually splitting the lines from a 1:250,000 hydrography data set (Soenksen and others, 1999) at every location where the streams were measured. Each stream-reach segment between streamflow-measurement sites was assigned a unique reach number. All other lines in the hydrography data set without reach numbers were omitted. This data set was created to archive the calculated streamflow gains and losses of streams in the Republican River Basin, Nebraska, in October 1998, and make the data available for use with geographic information systems (GIS). If measurement sites are used separately from reaches, the maximum scale of 1:100,000 should not be exceeded. When used in conjunction with the reach segments, the maximum scale should not exceed 1:250,000.

Open-File Report↗