USGS Science⌕ Search

SEARCH · USGS Science

Results for “Frontiers in Marine Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,606 records · Page 79Linked to original sources
USGS2024

Status and performance of the ShakeAlert® earthquake early warning system: 2019-2023

The U.S. Geological Survey (USGS)‐operated ShakeAlert® system is the United States West Coast earthquake early warning system ( Given et al. , 2018 ). In this study we detail ShakeAlert’s performance during some of the largest events seen by the system thus far. Statewide public alerting using ShakeAlert messages was authorized in California in October 2019. Over the next few years, public alerts were expanded into Oregon and then into Washington ( U.S. Geological Survey, 2024 ). ShakeAlert source results are routinely compared to the USGS Comprehensive Catalog (ComCat; Guy et al. , 2015 ; U.S. Geological Survey, Earthquake Hazards Program, 2017 ), which contains the earthquake location and magnitude determined using complete waveform data. M 4.5 and larger is the threshold used for public alerting and was deliberately set below the level where damage is likely to compensate for cases where the system underestimates the magnitude. Between 17 October 2019 and 1 September 2023, the ShakeAlert system created 95 events with maximum magnitude estimates of M ≥4.5, the public alerting threshold. 94 of the 95 events were due to real earthquakes. Seven were categorized “false” per ShakeAlert’s internal definition that there was no matching catalog event within 100 km and 30 s of origin time; however, all but one of these were real earthquakes that were poorly located, primarily because they were at the edges of the seismic network. Three detected events were labeled “missed” because they were very poorly located (>100 km location error). In addition, the system did not produce solutions for four ComCat events M ≥4.5 ( U.S. Geological Survey, Earthquake Hazards Program, 2017 ), which were all at the edge of the alerting and network boundaries. The ShakeAlert system has accurately detected the majority of earthquakes that have occurred within the operational region since completing the public rollout, and alerts from the system have been delivered to millions of cell phone users throughout the West Coast.

California, Oregon, Washington↗
USGS2024

Utilization of stochastic ground motion simulations for scenario-based performance assessment of geo-structures

Probabilistic seismic performance assessments of engineered structures can be highly sensitive to the seismic input excitation and its variability. In the present study, the scenario-based performance assessment recommended by Federal Emergency Management Agency (FEMA) P-58 guidelines is adopted to estimate seismic fragility of concrete dams for various seismic hazard scenarios. Due to the scarcity of recorded ground motions and thereby their poor representation of uncertainties, stochastic ground motion simulation methods are utilized to obtain the required input excitations. Moreover, to understand the uncertainty in ground motion simulation models, two broadband stochastic simulation models are used to generate input excitations representing six seismic hazard scenarios defined by earthquake magnitude, source-to-site distance, and soil conditions. Optimal intensity measure parameters for each scenario are identified using a systematic procedure that considers criteria such as efficiency, practicality, proficiency, sufficiency, and hazard compatibility. Fragility curves and surfaces are derived using the cloud analysis technique, taking into account various damage measures and limit state functions. The study finds that the derived fragility curves are particularly sensitive to the selection of earthquake scenarios, the choice of records, and the methods used to calculate fragility curves, with less sensitivity observed to different engineering demand parameters. Given this sensitivity, particularly to ground motion selection, the study highlights the necessity of incorporating both model-to-model variability (epistemic uncertainty) and record-to-record variability (aleatory uncertainty), alongside the established material and modeling uncertainties, in the probabilistic seismic assessment.

Reliability Engineering and System Safety (RESS)↗
USGS2024

Three-dimensional temperature maps of the Williston Basin, USA: Implications for deep hot sedimentary and enhanced geothermal resources

As part of U.S. Geological Survey's (USGS) efforts to identify and assess geothermal energy resources of the US, a three-dimensional (3D) geologic and thermal model has been constructed for the Williston Basin, USA. The geologic model consists of all sedimentary units above the Proterozoic and Archean crystalline rock (called basement herein), with a total sedimentary thickness of up to 5 km near the basin center. Twenty-nine geologic units were mapped from interpreted formation tops from 16,465 wells. A 3D temperature model was constructed to a depth of 7 km by constructing a 3D heat flow model for the sedimentary units, followed by estimating underlying temperature using a one-dimensional (1D) analytic solution for heat flow within the underlying crystalline basement. Using the sedimentary basin model, heat flow was simulated in 3D and was calibrated using three temperature datasets: 1) 24 high-confidence static temperature logs (equilibrium thermal profiles), 2) more than15,000 drill stem test (DST) measurements from >7,000 wells, and 3) more than 45,000 bottomhole temperature (BHT) measurements from >14,000 wells. The DST and BHT datasets provide broad spatial coverage, but are lower confidence, primarily because measurements were made prior to attaining thermal equilibrium. DST and BHT measurements were binned regionally to develop representative thermal profiles that generally agree with these lower quality data (hereafter called pseudowell temperature profiles). Layer properties (primarily thermal conductivity and compaction curves) were set to best estimate values, then the heat flow model was calibrated to fit pseudowell and static temperature logs primarily by adjusting basal heat flow to approximate the overall temperature profile. Minor adjustments to thermal conductivity allowed adjusting changes in slope at lithologic contacts. Resulting maps include 3D temperature and basal (bottom of sedimentary units) heat flow estimates, which are used as input for the temperature model of the basement. The crystalline basement temperature model uses an analytic 1D solution to the heat flow equation that requires estimates of heat flow and temperature at the upper boundary (i.e., the sediment/basement contact), radiogenic heat production within the crystalline basement, and reference thermal conductivity (i.e., uncorrected for temperature). Two regions of high heat flow are identified: 1) in western North Dakota along the North American Central Plains Conductivity Anomaly and 2) in eastern Montana near the Poplar dome. Within the sedimentary column in the center of the basin of the basin, an area of approximately 100,000 km2 is predicted to have moderate- to high-temperature geothermal resources (>90 °C) under the thickest sequences of sediments. Where thick insulation and high heat flow coincide, electric-grade resources can be less than 4 km deep. Assuming a maximum feasible drilling depth of 7 km, temperatures are predicted to be as high as 175 °C. The geologic model may be used to identify strata at sufficient temperatures that may have natural permeability or that may have conditions that favor development of enhanced/engineered geothermal systems resources.

Montana, North Dakota, South Dakota↗
USGS2026

Streamflow, water quality, and constituent loads and yields, Scituate Reservoir drainage area, Rhode Island, water year 2023

As part of a long-term cooperative program to monitor water quality within the Scituate Reservoir drainage area, the U.S. Geological Survey, in cooperation with Providence Water (formerly the Providence Water Supply Board), collected streamflow and water-quality data in tributaries to the Scituate Reservoir, Rhode Island. Streamflow and concentrations of chloride and sodium estimated from records of specific conductance for 16 tributaries were used to calculate loads of chloride and sodium during water year 2023 (October 1, 2022, through September 30, 2023). Water-quality samples were collected by Providence Water at 38 sampling stations on tributaries to the Scituate Reservoir during water year 2023. These water-quality data are summarized by using values of central tendency and are used, in combination with measured (or estimated) streamflows, to calculate loads and yields of selected water-quality constituents for water year 2023. Annual mean streamflows for monitoring stations in this study ranged from 0.47 to 34.4 cubic feet per second during water year 2023. At the 16 continuous-record streamgages, tributaries transported about 3,000 metric tons of chloride and 1,900 metric tons of sodium to the Scituate Reservoir; annual chloride yields for the tributaries ranged from 19 to 200 metric tons per square mile, and annual sodium yields ranged from 13 to 120 metric tons per square mile. At the stations where water-quality samples were collected by Providence Water, the medians of the median daily loads were 65,000 million colony forming units per day for coliform bacteria, 870 million colony forming units per day for Escherichia coli , 200 kilograms per day for chloride, 8.2 grams per day as nitrogen for nitrite, 520 grams per day as nitrogen for nitrate, and 300 grams per day as orthophosphate for phosphate. The medians of the median yields were 25,000 million colony forming units per day per square mile for coliform bacteria, 600 million colony forming units per day per square mile for Escherichia coli , 65 kilograms per day per square mile for chloride, 4.6 grams per day per square mile as nitrogen for nitrite, 180 grams per day per square mile as nitrogen for nitrate, and 180 grams per day per square mile as orthophosphate for phosphate.

Rhode Island↗
USGS2025

Re-Os geochronology of molybdenite by LA-ICP-MS/MS

Re-Os geochronology is a powerful tool to directly date sulphide mineralisation using phases such as molybdenite, pyrite and chalcopyrite. We present a snapshot of a method in development utilizing laser ablation inductively coupled-plasma ‘triple quad’ mass spectrometry (LA-ICP-MS/MS) for Re-Os geochronology of molybdenite. While traditional LA-(MC)-ICP-MS measurements are limited by the >90% isobaric interference correction of parent radioactive 187 Re on radiogenic daughter 187 Os, the MS/MS technology minimizes this correction through careful instrument tuning and use of a (CH 4 + H 2 + He) reaction gas mixture to mass shift 187 Os away from 187 Re. We demonstrate the potential of the MS/MS technique by presenting robust Re-Os dates for three different molybdenite samples ranging in age from ~28 to 1520 Ma.

Conference Paper↗
USGS2025

The U.S. Geological Survey National Water Quality Network—Groundwater, 2024

The U.S. Geological Survey (USGS) operates a National Water Quality Network (NWQN) to monitor trends in groundwater quality and assess emerging contaminants of concern. It is a “network of networks” with 81 subnetworks being sampled on a decadal time scale. Each year, 8 of the subnetworks are sampled. Subnetworks have 20–30 wells each and include studies of domestic supply wells or shallow groundwater (20–50 feet deep) underlying urban land use or agricultural land use. Currently there are 2,089 wells in the network. All wells are sampled for physical properties, nutrients, major ions, trace elements, per- and polyfluoroalkyl substances (PFAS), and a subset of wells are sampled for pesticides, volatile organic compounds, radionuclides, and microbiological contaminants.

Contiguous United States↗
USGS2024

RegionGrow3D: A deterministic analysis for characterizing discrete three-dimensional landslide source areas on a regional scale

Regional-scale characterization of shallow landslide hazards is important for reducing their destructive impact on society. These hazards are commonly characterized by (a) their location and likelihood using susceptibility maps, (b) landslide size and frequency using geomorphic scaling laws, and (c) the magnitude of disturbance required to cause landslides using initiation thresholds. Typically, this is accomplished through the use of inventories documenting the locations and triggering conditions of previous landslides. In the absence of comprehensive landslide inventories, physics-based slope stability models can be used to estimate landslide initiation potential and provide plausible distributions of landslide characteristics for a range of environmental and forcing conditions. However, these models are sometimes limited in their ability to capture key mechanisms tied to discrete three-dimensional (3D) landslide mechanics while possessing the computational efficiency required for broad-scale application. In this study, the RegionGrow3D (RG3D) model is developed to broadly simulate the area, volume, and location of landslides on a regional scale (≥1,000 km 2 ) using 3D, limit-equilibrium (LE)-based slope stability modeling. Furthermore, RG3D is incorporated into a susceptibility framework that quantifies landsliding uncertainty using a distribution of soil shear strengths and their associated probabilities, back-calculated from inventoried landslides using 3D LE-based landslide forensics. This framework is used to evaluate the influence of uncertainty tied to shear strength, rainfall scenarios, and antecedent soil moisture on potential landsliding and rainfall thresholds over a large region of the Oregon Coast Range, USA.

Journal of Geophysical Research: Earth Surface↗
USGS2025

Remote single-station seismic monitoring of the July–October 2022 earthquake swarm at Tau volcano, American Samoa

From July to October 2022, a non-eruptive volcanic earthquake swarm occurred within ~15 km of Taʻū Island, located in eastern American Samoa. Felt reports from local residents were the only available information about the swarm when it started, as American Samoa lacked a seismic monitoring network. We developed a consistent single-station catalog for the entire swarm, using seismic data from the nearest station IU.AFI, ~250 km away. We applied the EQTransformer deep-learning model (Mousavi et al., 2020), automatically picking Pn and Sn arrivals on IU.AFI continuous data. We retained only events with Sn-Pn times of 22.5–25 seconds, consistent with the expected locations based on felt reports, then detected smaller swarm events with subsequent template-matching. This single-station catalog characterized the swarm’s onset and escalation to peak activity before a multi-agency field response team installed a local seismic network in mid-August 2022. This permanent seismic network captured the swarm’s decline. EQTransformer identified short S-P times on the first two locally deployed seismometers, both Raspberry Shake sensors, to constrain the swarm’s distance from Taʻū Island. Modern seismological processing methods, combined with basic observations such as felt reports, can quickly contribute useful information during an earthquake response in a poorly monitored region.

American Somoa↗
USGS2025

Linking stream-reach nitrogen loads and groundwater “reachsheds” to inform wastewater-nitrogen management actions, Cape Cod, Massachusetts

Study Region Cape Cod, Massachusetts, U.S.A. Study Focus Anthropogenic nitrogen (N) is a key factor in degrading groundwater and surface-water quality, particularly in coastal New England where onsite wastewater systems are prevalent. This study evaluated whether direct N-load measurements in streams on Cape Cod, Massachusetts, coupled with flow-path information from groundwater-flow models, can effectively identify potential land areas where nitrogen mitigation could substantially reduce loads to receiving waters. Nitrogen fluxes were measured along 63 stream reaches during winter and summer and paired with simulated groundwater recharge areas to identify and rank potential areas for reduction of nonpoint-source N inputs. New Hydrologic Insights for the Region Reach-scale nitrate-N loads ranged from −39.1–1182 kg-N/yr per 100 m of stream, indicating spatially variable groundwater inputs across seasons. “Reachsheds” — areas contributing groundwater recharge to specific stream reaches — were delineated using a regional groundwater-flow model. Strong correlations were found between observed N loads and land-use characteristics, especially the number of septic systems and total N inputs from the sum of considered sources. Observed N loads were moderately correlated with recharge area size and wastewater flow estimates. Correlating reach-specific groundwater N loads with land use and parcel-scale nitrogen-yield data identified reachsheds with the highest potential for N load reduction. This approach enables targeted implementation of restoration efforts to optimize nutrient management and support regional load reduction.

Massachusetts↗
USGS2025

Petrogenesis and mineralization potential of the Bradley Peak komatiitic basalts, Wyoming Province

The ca. 2.72 Ga Bradley Peak greenstone terrane in the Wyoming Province contains spinifex- and cumulate-textured komatiitic volcanic rocks that may host Ni-Cu-PGE sulfide mineralization. New whole rock geochemistry classifies these rocks as Al-undepleted komatiitic basalts derived from a parental melt with ~17 wt. % MgO. Isotopic data (Sm-Nd, Re-Os) and REE profiles suggest a plume source and possible assimilation of juvenile footwall volcanic rocks. Calculated sulfur concentrations at sulfide saturation and low-detection PGE geochemistry indicate these magmas did not saturate a sulfide liquid resulting in sulfide mineralization. Although the Bradley Peak komatiitic basalt flows are unlikely to host magmatic sulfide mineralization, they are likely the source of Au for regional orogenic gold deposits.

Wyoming↗
USGS2025

Paleoseismology and paleogeodesy using coral microatolls

Establishing the rupture extent and slip distribution of individual paleo-earthquakes is vital for assessing fault behavior including the persistence of rupture segmentation, recurrence patterns, and similarity of successive events, key issues in both fault mechanics and hazard assessment. Techniques with high temporal and geodetic precision as well as a wide distribution of study sites are necessary to investigate past earthquakes in such detail. Coral microatoll growth is one of the best types of geologic record for paleoseismology and paleogeodesy given these needs, as it provides long, continuous, widely distributed records of centimeter-scale vertical tectonic motion with potentially annual-level temporal precision. This chapter describes the process of interpreting microatoll growth records to obtain time series of relative sea level, tectonic vertical deformation fields, and finally slip and coupling parameters on an underlying fault interface.

Book chapter↗
USGS2026

Corundum discovered by SuperCam and the Perseverance rover at Jezero crater, Mars

Mars is primarily composed of mafic mineral assemblages and their alteration products, but small, scattered rocks strewn across the landscape offer clues to greater petrological diversity. While traversing the Jezero crater rim, the Perseverance rover encountered several plagioclase-rich light-toned float rocks. SuperCam identified the distinctive signature of corundum (α-Al 2 O 3 ) in these rocks using time-resolved luminescence spectroscopy. Two strong peaks (692.7 and 694.1 nm) with millisecond lifetimes, and additional supporting lines, are consistent with Cr 3+ substitution for Al 3+ in corundum. Corundum forms in Al-rich, Si-depleted environments through magmatic or metamorphic processes. Given the rocks' small size, association with plagioclase, and location on the crater rim, we interpret the most plausible formation scenario to be impact induced metamorphism at the interface of a felsic and a mafic/ultramafic member with the likely action of fluids at some stage, although other possibilities are not excluded.

Geophysical Research Letters↗
USGS2024

Geospatial PDF map of the compilation of GIS data for the mineral industries and related infrastructure of Africa

Introduction In 2021, the U.S. Geological Survey's (USGS) National Minerals Information Center (NMIC) completed the project titled "Compilation of geospatial data for the mineral industries and related infrastructure of Africa." This project aimed to leverage the expertise and capabilities of the NMIC to collect, synthesize, and interpret geospatial data to inform on the extractive resources of the African region and expand the NMIC's understanding on the impact of mineral industry of African nations in the global economy. The African region, which comprises the independent nations that make up the African continent and its associated islands and dependencies, consists of a total of 58 mineral producing countries. The primary objective of this effort was to create a fully attributed Geographic Information System (GIS) portraying existing mining infrastructure, resources, and development capacity across Africa along with the related infrastructure capable of supporting current (for the reference year 2018) and future extractive industry operations in the region. The compiled GIS geodatabase with supporting documentation including comprehensive metadata was published as a USGS data release titled "Compilation of Geospatial Data (GIS) for the Mineral Industries and Related Infrastructure of Africa." This georeferenced portable document format (GeoPDF) map sheet presents a new geographic information product containing a partial representation of the GIS data. This GeoPDF map provides a visual comparison of the distribution of mineral industry and related infrastructure GIS data, which contributes to a deeper understanding of the intersections and complexities of the extractive industries within Africa.

Open-File Report↗
USGS2025

Earthquake stress drop, source spectra from laboratory experiments, and the apparent unsteadiness of frictional slip

Over a range of co-seismic total energy release, high sample rate slip, stress, and slip velocity measurements were made during frictional failure to determine seismic source properties. The near-field measurements were used to estimate stress drops using spectral approaches that are analogous to the standard seismological moment-corner determined Δσ and acceleration amplitude Δσ arms stress drops. Rapid frictional sliding produces slip velocity amplitude spectra that vary with frequency -1 so long as the energy dissipated by friction approaches the total energy release. Under these conditions Δσ and Δσ arms are similar in size. Since these are nearly direct measurements of fault slip velocity and because they produce flat acceleration spectra between the corner and an apparent fmax, friction in these experiments seems to produce dynamic acceleration and deceleration at all resolved frequencies. The physical origin of this unsteady motion is not known exactly but likely reflects rapid dynamic variations in fault strength or applied stress. On the other hand, when the total energy stored prior to failure is artificially made somewhat larger relative to that which can be dissipated by friction the velocity spectra vary with frequency -2 immediately below the corner. At these conditions Δσ and Δσ arms diverge. The excess stored energy is preferentially partitioned into radiated energy upon failure. Collectively the experiments imply that to produce unsteady, white noise accelerations that are observed for natural earthquakes, requires that at least 95% of the energy released does not escape the source region to be radiated to the far-field.

Bulletin of the Seismological Society of America↗
USGS2026

Where will the cat cross the road? Comparing camera and GPS-based models for identifying wildlife corridors

Designing effective wildlife corridors is a critical conservation challenge in fragmented landscapes. GPS-based step selection functions strongly predict dispersal corridors and connectivity, but GPS collaring can be expensive and invasive. Camera-based occupancy models are widely used for connectivity analyses but may involve trade-offs in data resolution. Despite widespread use of both approaches, few studies have directly compared them using concurrent datasets. We developed a stacked single-species, single-season occupancy model and a Circuitscape connectivity surface for mountain lions (Puma concolor) on Washington’s Olympic Peninsula, USA, and compared them with a connectivity surface from an existing integrated step selection function. Both models predicted mountain lion GPS locations well, with binned Spearman rank correlations of 1 for Circuitscape and 0.96 for the step selection function, though step selection better identified habitat use by dispersers. Connectivity predictions were moderately correlated across the landscape ( r = 0.26), but agreement was strongest in human-dominated areas most critical for corridor planning. We conclude that GPS-based approaches are advantageous when data collection is feasible and the focus is on dispersal or fine-scale movement. However, camera-based approaches may be preferable for multi-species monitoring, large spatial and temporal scales, noninvasive sampling, when resources are limited, or when fine-scale or dispersal-specific inference is not required.

Washington↗
USGS2001

Water, ice, meteorological, and speed measurements at South Cascade Glacier, Washington, 1999 balance year

Winter snow accumulation and summer snow, firn, and ice melt were measured at South Cascade Glacier, Washington, to determine the winter and net balances for the 1999 balance year. The 1999 winter snow balance, averaged over the glacier, was 3.59 meters, and the net balance was 1.02 meters. Since the winter balance record began in 1959, only three winters have had a higher winter balance. Since the net balance record began in 1953, only 2 years have had a greater positive net balance than 1999. Runoff was measured from the glacier and an adjacent non-glacierized basin. Air temperature, precipitation, and humidity were measured nearby, and ice speed was measured. This report makes these data available to the glaciological and climatological community.

Washington↗
USGS2024

Substrate Enhancement Pilot Project—Monitoring summary and evaluation, Kootenai River, Idaho, 2012–22

To assess changes in substrate conditions and the efficacy of artificially placed substrates at select sites on the Kootenai River near Bonners Ferry, Idaho, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, completed repeat bathymetric, velocimetric, and underwater videography surveys. Collectively, three project sites throughout the Kootenai River make up the Substrate Enhancement Pilot Project (SEPP), an effort intended to improve spawning and egg incubation viability at locations identified to be aquatic habitat limited for the endangered Kootenai River white sturgeon (Acipenser transmontanus). Following the placement of coarse substrates at each site, bathymetric, velocimetric, and underwater videography data were collected from 2012 to 2022 to assess the role of deposition and erosion on maintaining suitable white sturgeon spawning and incubation substrates. Minimal erosion and deposition occurred at all Substrate Enhancement Pilot Project sites, according to interannual and intra-annual net volumetric changes between bathymetric surveys. Depending on the timing of bathymetric surveys relative to the annual peak streamflow conditions, isolated locations of deposition or erosion were observed at each site and the potential for deposition or erosion was supported by measured mean depth-averaged velocities. This study concluded that variability of deposition and scour were common at each site throughout the monitoring period and may be attributed to fluctuations in streamflow. Repeat bathymetric, underwater videography, and velocity mapping surveys were used to verify the interstitial spaces and surfaces of substrates at each SEPP site remained free of fine sediments for intervals longer than a year but were susceptible to deposition between high streamflow events.

Idaho↗
USGS2024

Parsimonious high-resolution landslide susceptibility modeling at continental scales

Landslide susceptibility maps are fundamental tools for risk reduction, but the coarse resolution of current continental-scale models is insufficient for local application. Complex relations between topographic and environmental attributes characterizing landslide susceptibility at local scales are not transferrable across areas without landslide data. Existing maps with multiple susceptibility classifications under-represent landslide potential in moderate and gently sloping terrain. We leverage an extensive landslide database ( N = 613,724), a high-resolution digital elevation model (10-m), and high-performance computing resources, to develop a new nationwide susceptibility map for the contiguous United States, Hawaii, Alaska, and Puerto Rico. We calculate four alternative linear and nonlinear thresholds of topographic slope and relief using an objective split-sample calibration. We down-sample our results to a 90-m grid to account for uncertainty in the digital elevation model and landslide position, and evaluate these thresholds' ability to differentiate areas of greater susceptibility. The less conservative nonlinear model optimally balances our priorities of capturing observed landslides (99%) while minimizing area covered by susceptible terrain (43%). Independent evaluation with four statewide landslide inventories ( N = 172,367) reinforces our model selection but highlights spatially variable performance. Therefore, we propose a novel approach to susceptibility classification using the concentration of landslide-prone terrain within each down-sampled grid. While landslides are possible within any cells containing susceptible terrain, those with the highest concentration capture the majority of observed landslides. Our new map characterizes landside susceptibility more consistently than prior models; our transparent classification approach also provides flexibility for accommodating different tolerances in risk reduction measures.

AGU Advances↗