SEARCH · USGS Science

Results for “Explorer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79Linked to original sources

USGS1982

Gulf of Alaska and Lower Cook Inlet summary report 3: Second revision of Outer Continental Shelf oil and gas activities in the Gulf of Alaska (including Lower Cook Inlet) and their onshore impacts: A summary report, September 1980

Five Outer Continental Shelf (OCS) lease sales have been held in the Gulf of Alaska subregion of Alaska. Lease Sale 39, in the northern Gulf of Alaska, was held on April 13, 1976, and it resulted in the leasing of 76 tracts. Lease Sale CI, held on October 27, 1977, resulted in the leasing of 87 tracts in Lower Cook Inlet. Lease Sale 55 in the eastern Gulf of Alaska, held on October 21, 1980, leased 35 tracts. The first Reoffering Sale (RS-1), held on June 30, 1981, resulted in the leasing of one tract in the eastern Gulf of Alaska. Lease Sale 60, the most recent sale in the subregion, was held on September 29, 1981. It resulted in the leasing of 13 tracts in the Lower Cook Inlet and the Shelikof Strait. Exploratory drilling has been conducted on tracts leased in Lease Sales 39 and CI. No commercial discoveries were made, and no further exploratory drilling is anticipated on tracts leased in either sale. ARCO has plans to explore a tract leased in Lease Sale 55 in January 1983. Chevron has conducted geohazard studies on tracts leased in Lease Sale 60. The results of these studies will determine if exploratory wells will be drilled. Exploratory drilling, if it does take place, is not anticipated before the summer of 1983. In March 1982, the Department of the Interior prepared new resource estimates for the Gulf of Alaska subregion. The risked mean resource estimates for tracts leased in Lease Sale 55 and Lease Sale RS-1 are 12.1 million barrels of oil and 46.2 billion cubic feet of gas. The risked mean resource estimates for tracts leased in Lease Sale 60 are 5.6 million barrels of oil and 5 billion cubic feet of gas. The onshore impacts from previous OCS exploration in the Gulf of Alaska and the Lower Cook Inlet were minimal. Yakutat will be used to support exploratory drilling on any Lease Sale 55 or Lease Sale RS-1 tracts. If exploratory drilling takes place on Lease Sale 60 tracts, support facilities are expected to be located in Kenai or on Kodiak Island.

Gulf of Alaska, Outer Continental Shelf↗

USGS1982

Thermal regime of permafrost at Prudhoe Bay, Alaska

Temperature measurements through permafrost in the oil field at Prudhoe Bay, Alaska, combined with laboratory measurements of the thermal conductivity of drill cuttings permit an evaluation of in situ thermal properties and an understanding of the general factors that control the geothermal regime. A sharp contrast in temperature gradient at ~600 m represents a contrast in thermal conductivity caused by the downward change from interstitial ice to interstitial water at the base of permafrost under near steady-state conditions. Interpretation of the gradient contrast in terms of a simple model for the conductivity of an aggregate yields the mean ice content and thermal conductivities for the frozen and thawed sections (8.1 and 4.7 mcal/cm sec ?C, respectively). These results yield a heat flow of ~1.3 HFU which is similar to other values on the Alaskan Arctic Coast; the anomalously deep permafrost is a result of the anomalously high conductivity of the siliceous ice-rich sediments. Curvature in the upper 160 m of the temperature profiles represents a warming of ~1.8?C of the mean surface temperature, and a net accumulation of 5-6 kcal/cm 2 by the solid earth surface during the last 100 years or so. Rising sea level and thawing sea cliffs probably caused the shoreline to advance tens of kilometers in the last 20,000 years, inundating a portion of the continental shelf that is presently the target of intensive oil exploration. A simple conduction model suggests that this recently inundated region is underlain by near-melting ice-rich permafrost to depths of 300-500 m; its presence is important to seismic interpretations in oil exploration and to engineering considerations in oil production. With confirmation of the permafrost configuration by offshore drilling, heat-conduction models can yield reliable new information on the chronology of arctic shorelines.

Open-File Report↗

USGS1982

Geology of areas marked by geophysical anomalies (B-35 and B-34), Wadi Bidah District, Kingdom of Saudi Arabia

Geophysical surveys in the Wadi Bidah district, in the southwestern part of the Kingdom of Saudi Arabia, have revealed anomalies of the type that may be caused by deposits of massive sulfides. Accordingly, a study was undertaken to investigate the geologic environment associated with the geophysical anomalies and to determine whether mineral exploration of the anomalous areas might be warranted. An extensive geochemical sampling program did not disclose any evidence of ore mineral concentrations in the rocks. Detailed geologic mapping shows the anomalous areas to be underlain by Precambrian carbonaceous graywacke, the outcrop patterns of which closely fit the anomaly patterns. Field evidence and petrologic studies indicate that carbonaceous material in the rocks is the cause of the geophysical anomalies. Nothing was found in the anomalous areas that suggests the presence of mineral deposits of commercial grade, and further mineral investigations or exploration in the areas is not recommended.

Open-File Report↗

USGS1982

Reconnaissance investigations of ancient gold mines in the southern part of the Wadi Bidah District, Jabal Ibrahim and Al Aqiq quadrangles, Kingdom of Saudi Arabia

Ancient gold mines in the southern part of the Wadi Bidah district, Kingdom of Saudi Arabia, are located either within lenses of ferruginous chert or in large felsic intrusions of Precambrian age. All are associated with quartz veins, stringers, and stockworks. Samples from both types of deposits have low silver and base-metal contents; samples from deposits within ferruginous chert have anomalous arsenic contents. None of the deposits are large enough to be considered as prime exploration targets at this time. Analytical results from the Bani Sar deposit, which is located within felsic plutonic rocks, are encouraging, but additional surface investigations are needed to define the size and extent of the mineralized zone. Deposits associated with ferruginous chert are also of exploration interest. Anomalous gold contents and other evidence of mineralization were found along a considerable exposure of the metasedimentary unit that contains the chert lenses.

Open-File Report↗

USGS1982

Drilling results at the Farah Garan ancient mine, southwestern Saudi Arabia

The Farah Garan ancient mine is located at fat 17?41'00'' N., long 43?38'15'' E. in the southwestern part of the Kingdom of Saudi Arabia. Three diamond drill holes intersected base-metal sulfides, which are present both as conformable layers in Precambrian tuffaceous volcanic rocks and as fracture fillings, irregularly shaped masses, disseminations, and clots in intensely hydrothermally altered and brecciated fault zones. The sulfides probably formed through volcanic processes in a shallow-marine environment and subsequently were greatly modified by tectonism and hydrothermal activity. Drill hole F.G.-1 intersected sparse base and precious metal minerals along a length of 30 m; several narrow, isolated zones contain as much as 22 grams per metric ton (g/t) silver, 1.25 percent copper, and 3.10 percent zinc. Drill hole F.G.-2 intersected low-grade base and precious metal minerals along a length of 50 m. Within this zone, a 10-m interval contains an average of 0.15 g/t gold, 10.7 g/t silver, and 0.86 percent zinc. Drill hole F.G.-3 cut commercial-grade base and precious metal minerals in a 3.55-m interval that contains an average of 20.06 g/t gold, 32.75 g/t silver, and 6.28 percent zinc. Additional exploration, including drilling and laboratory studies, is recommended to further define potential tonnages of base and precious metals intersected in drill hole F.G.-3 and to learn more about their genesis and mineral form. Arsenic and antimony are locally abundant in both drillcore and surface samples. Because of its weathering characteristics, mobility, and association with precious metals, arsenic commonly is a pathfinder for gold. Approximately 1,100 splits of surface samples collected in the Farah Garan area are stored at the Directorate General of Mineral Resources-U. S. Geological Survey chemical laboratory in Jiddah, and any further exploration should include assaying these samples for arsenic and antimony by wet-chemical analysis ?

Open-File Report↗

USGS1984

Engineering geology studies in the National Petroleum Reserve, Alaska

Engineering geology studies were conducted in direct support of the exploration program in the National Petroleum Reserve, Alaska. The studies included laboratory and field tests and observations to address design and construction problems of airfields, roads, drill pads and foundations, and to evaluate their actual performance. Permafrost containing large amounts of near surface ground ice as wedges, masses, and intergranular ice, required that all construction activity not disturb the thermal regime of the ground surface, which could lead to thaw of permafrost and ground subsidence. Summer activity, therefore was not allowable, yet the winter climate was so harsh that winter work was slow and inefficient. To allow summer operations at well sites planned for all year activity, it was necessary to adapt existing techniques for arctic construction and to devise new ones. The design and construction of facilities at the deep exploration wells at Inigok, Tunalik, and Lisburne posed the greatest challenge. These sites, requiring a year or more to drill, could only be attempted if continuous access to drilling and logistic supplies could be assured throughout the year, including the possibility of bringing in another drill rig, in the event of a blowout. Thus all-seasons airstrips were required at these wells. Sufficient quantities of local gravel were not readily available at the Inigok and Tunalik sites to construct the airstrips with the required 6 feet or more of gravel to prevent the underlying permafrost from thawing. Therefore, insulation was used to maintain the subbase of local sands in a continuously frozen state, which in turn was overlain by 15 inches of gravel or sandy gravel. Tests at the U.S. Army Waterways Experimental Station defined the minimum thickness of gravel required above the insulation to provide the desired bearing capacity for the C-130 type aircraft without crushing the insulation. Field testing also included the evaluation of another design option, using military landing mat underlain by insulation. Temperature recording devices were installed beneath the landing mat test sections, insulated runways, roads, drill pads, and reserve pits, to monitor the actual conditions and confirm the design assumptions. Investigations of thaw-settlement, erosion, and revegetation of all areas affected by construction were also conducted in anticipation of abandoning the sites, or, upgrading the facilities in the event the design life was extended.

Open-File Report↗

USGS1983

Preliminary results of spectral induced polarization measurements, Wadi Bidah District, Kingdom of Saudi Arabia

Laboratory spectral induced polarization (SIP) measurements on 29 carbonaceous schist samples from the Wadi Bidah district show that most are associated with very long polarization decays or, equivalently, large time constants. In contrast, measurements on two massive sulfide samples indicate shorter polarization decays or smaller time constants. This difference in time constants for the polarization process results in two differences in the phase spectra in the frequency range of from 0.06 to 1Hz. First, phase values of carbonaceous rocks generally decrease as a function of increasing frequency. Second, phase values of massive sulfide-bearing rocks increase as a function of increasing frequency. These results from laboratory measurements agree well with those from other reported SIP measurements on graphites and massive sulfides from the Canadian Shield. Four SIP lines, measured by using a 50-m dipole-dipole array, were surveyed at the Rabathan 4 prospect to test how well the results of laboratory sample measurements can be applied to larger scale field measurements. Along one line, located entirely over carbonaceous schists, the phase values decreased as a function of increasing frequency. Along a second line, located over both massive sulfides and carbonaceous schists as defined by drilling, the phase values measured over carbonaceous schists decreased as a function of increasing frequency, whereas those measured over massive sulfides increased. In addition, parts of two lines were surveyed down the axes of the massive sulfide and carbonaceous units. The phase values along these lines showed similar differences between the carbonaceous schists and massive sulfides. To date, the SIP survey and the SIP laboratory measurements have produced the only geophysical data that indicate an electrical difference between the massive sulfide-bearing rocks and the surrounding carbonaceous rocks in the Wadi Bidah district. However, additional sample and field measurements in areas of known mineralization would fully evaluate the SIP method as applied to various geologic environments and styles of massive sulfide mineralization. Additionally, the efficiency of SIP surveys in delineating areas of sulfide mineralization might be improved by surveying lines down the axes of known electrical conductors. An evaluation of the applied research done on the SIP method to date suggests that this technique offers significant exploration applications to massive sulfide exploration in the Kingdom of Saudi Arabia.

Open-File Report↗

USGS1994

Report on drilling activities in the Thar Desert, Sindh Province, Pakistan

Coal test drilling in the Thar Desert of southeast Pakistan was conducted as part of the Coal Exploration and Assessment Program (COALREAP) involving the United States Agency for International Development (USAID), the Geological Survey of Pakistan (GSP), and the U.S. Geological Survey. Drilling was performed in the Thar Desert, or Great Indian Desert, approximately 175 km northeast of Karachi. Twenty five exploration holes were drilled between January 1992 and May 1994. Drill core was described by geologists of the Pakistan Geological Survey and coal samples were analyzed in both the United States and Pakistan. U.S. Geological Survey geologists offered technical assistance, trained GSP personnel, and managed the drilling program according to an agreement with USAID under the Energy Planning and Development Project. Drilling was performed by the Geological Survey of Pakistan. During drilling, the first 50 m was rotary drilled and cuttings collected every 2 m for examination. Average depth for all coal beds is 214 m with a total average thickness of 10 m of coal per drill hole. Core was described, boxed, and stored at the Geological Survey of Pakistan core library at Sonda, near Hyderabad. Approximately 6,412 m of Paleocene to Eocene rock was drilled of which 3,990 m was cored and 1,113 m was rotary drilled. There was 1,309 m of core loss. Geophysical logging of each drill hole permitted detailed thicknesses of coal to be determined. Analysis of the coal indicated a rank of lignite B with an as-received heating value over 5,000 Btu. This report presents data collected at the drill sites and should be used in conjunction with the published interpretive report (Fassett and Durrani, 1994) and the USGS Open-File Report 94-167, which contains analysis of the coal samples. Tables provide quick reference to numeric data and results. Detailed index maps and specific data, for each drill hole are included. This report covers drill holes TP-5 to TP-31. Drill holes TP-16, 17, 21, 26, 27, and 29 were planned but not drilled due to time restraints and (or) a determination that those drill sites were not needed to effectively delineate the coal deposit. The basic data for drill holes TP-1 through TP-4 are included in SanFilipo and others, 1994 however, some data for these drill holes are included for consistency.

Sindh Province↗

USGS1996

City of Flagstaff Project: Ground Water Resource Evaluation, Remote Sensing Component

Many regions, cities, and towns in the Western United States need new or expanded water resources because of both population growth and increased development. Any tools or data that can help in the evaluation of an area's potential water resources must be considered for this increasingly critical need. Remotely sensed satellite images and subsequent digital image processing have been under-utilized in ground water resource evaluation and exploration. Satellite images can be helpful in detecting and mapping an area's regional structural patterns, including major fracture and fault systems, two important geologic settings for an area's surface to ground water relations. Within the United States Geological Survey's (USGS) Flagstaff Field Center, expertise and capabilities in remote sensing and digital image processing have been developed over the past 25 years through various programs. For the City of Flagstaff project, this expertise and these capabilities were combined with traditional geologic field mapping to help evaluate ground water resources in the Flagstaff area. Various enhancement and manipulation procedures were applied to the digital satellite images; the results, in both digital and hardcopy format, were used for field mapping and analyzing the regional structure. Relative to surface sampling, remotely sensed satellite and airborne images have improved spatial coverage that can help study, map, and monitor the earth surface at local and/or regional scales. Advantages offered by remotely sensed satellite image data include: 1. a synoptic/regional view compared to both aerial photographs and ground sampling, 2. cost effectiveness, 3. high spatial resolution and coverage compared to ground sampling, and 4. relatively high temporal coverage on a long term basis. Remotely sensed images contain both spectral and spatial information. The spectral information provides various properties and characteristics about the surface cover at a given location or pixel (that is, vegetation and/or soil type). The spatial information gives the distribution, variation, and topographic relief of the cover types from pixel to pixel. Therefore, the main characteristics that determine a pixel's brightness/reflectance and, consequently, the digital number (DN) assigned to the pixel, are the physical properties of the surface and near surface, the cover type, and the topographic slope. In this application, the ability to detect and map lineaments, especially those related to fractures and faults, is critical. Therefore, the extraction of spatial information from the digital images was of prime interest in this project. The spatial information varies among the different spectral bands available; in particular, a near infrared spectral band is better than a visible band when extracting spatial information in highly vegetated areas. In this study, both visible and near infrared bands were analyzed and used to extract the desired spatial information from the images. The wide swath coverage of remotely sensed satellite digital images makes them ideal for regional analysis and mapping. Since locating and mapping highly fractured and faulted areas is a major requirement for ground water resource evaluation and exploration this aspect of satellite images was considered critical; it allowed us to stand back (actually up about 440 miles), look at, and map the regional structural setting of the area. The main focus of the remote sensing and digital image processing component of this project was to use both remotely sensed digital satellite images and a Digital Elevation Model (DEM) to extract spatial information related to the structural and topographic patterns in the area. The data types used were digital satellite images collected by the United States' Landsat Thematic Mapper (TM) and French Systeme Probatoire d'Observation de laTerre (SPOT) imaging systems, along with a DEM of the Flagstaff region. The USGS Mini Image Processing Sy

Open-File Report↗

USGS1999

Geologic datasets for weights of evidence analysis in northeast Washington: 3. Minerals-related permits on national forests, 1967 to 1998

Permits to explore for and (or) develop mineral resources on forest land can be used to indicate locations and types of mineral-related activities on national forests. Permits for these activities require filing at the Forest Service a Notice of Intention (Notice) to conduct mineral exploration activities and (or) a Plan of Operation (Plan). A Plan of Operation is required is significant activities are anticipated. This compilation of Notices and Plans for the Colville, Kaniksu, Okanogan, and Wenatchee National Forests between 1967 and 1998 is intended for use in combination with geologic and economic information to predict future mineral-related activities in the region.

Washington↗

USGS1999

Geologic datasets for weights-of-evidence analysis in northeast Washington: 3. Minerals-related permits on national forests, 1967-1998

Washington↗

USGS2000

Seismic reflection results from the GYRE 1997 cruise of the Bryant Canyon on the Louisiana Gulf Coast

The Texas-Louisiana continental slope is one of the few remaining frontiers for hydrocarbon exploration within the US Exclusive Economic Zone. This area has a complex seafloor morphology and highly discontinuous shallow stratigraphy that are the result of deformation by the highly mobile Louann salt that underlies much of this margin shoreward of the Sigsbee Escarpment.Gas hydrates exist both on the sea floor and at depth throughout the gas hydrate stability zone which extends to several hundred meters beneath the sea floor at greater water depths. Multibeam bathymetry, GLORIA sidescan sonar imagery, and site-specific studies have identified the presence of faults, mass-wasting deposits, variable sediment types, and gas hydrates exposed on the seafloor. The expression of these features on the seafloor suggests a tectonically active area. The distribution of these different processes and their relation to the subsurface stratigraphy and tectonic setting are not well understood, yet an understanding of these issues is essential as exploration extends into this deep-water area. To address the questions of surficial processes and their connection with deeper structures underlying this continental margin, a three-week cruise was conducted by the USGS in April, 1997 aboard the RV GYRE. The study area focussed on Bryant Canyon, a former submarine canyon, through which turbidity currents transported sands from a shelf-edge delta upslope of the study area to the Bryant Fan on the rise seaward of the base of the slope. The cruise was divided into two parts. The first part was devoted to collecting seismic-reflection profiles across parts of the canyon system to define the shallow stratigraphy and to determine the presence and distribution of gas hydrates in this area. Approximately 555 km of single-channel seismic-reflection data were collected during this first part of the cruise. A track map showing the locations of the profiles, low-resolution images of the profiles, and the SEG-Y format of these data are all presented on this CD-ROM. During the second part of the cruise, 38 piston cores were collected to describe the shallow subsurface facies of the study area. The coring data will be availible in an open file report to be published by Hans Nelson.

Lousiana↗

USGS1999

The Red Sea Basin Province: Sudr-Nubia(!) and Maqna(!) Petroleum Systems

The Sudr-Nubia(!) oil-prone total petroleum system dominates the densely explored Gulf of Suez part of the rifted Red Sea Basin Province. Upper Cretaceous to Eocene source rocks, primarily the Senonian Sudr Formation, are organic-rich, areally uniform marine carbonates that have generated known ultimate recoverable reserves exceeding 11 BBOE. The name Nubia is used for sandstone reservoirs with a wide range of poorly constrained, pre-rift geologic ages ranging from Early Paleozoic to Early Cretaceous. Syn- and post-rift Tertiary reservoirs, especially the Kareem Formation, also contain significant reserves. Partly overlapping Sudr-Nubia(!) is the areally larger and geochemically distinct, oil-and-gas-prone Maqna(!) total petroleum system within the southern Gulf of Suez basin and the sparsely explored remaining Red Sea basin. Known ultimate recoverable reserves are 50-100 MMBOE and more than 900 MMBOE, respectively, in those areas. Both the source and reservoir rocks in this petroleum system are Tertiary, dominantly Miocene, in age. Maqna(!) has the greater potential for future resource development.

Open-File Report↗

USGS1999

Ghaba salt basin province and Fahud salt basin province, Oman; geological overview and total petroleum systems

Three Total Petroleum Systems each consisting of one assessment unit have been identified in the Ghaba and Fahud Salt Basin Provinces of north-central Oman. One Total Petroleum System and corresponding assessment unit, the North Oman Huqf/`Q'? Haushi(!) Total Petroleum System (201401) and Ghaba-Makarem Combined Structural Assessment Unit (20140101), were identified for the Ghaba Salt Basin Province (2014). In the Fahud Salt Basin Province, however, two overlapping Total Petroleum Systems (TPS) were recognized: 1) the North Oman Huqf ? Shu'aiba(!) TPS (201601); Fahud-Huqf Combined Structural Assessment Unit (20160101), and 2) the Middle Cretaceous Natih(!) TPS (201602); Natih-Fiqa Structural/Stratigraphic Assessment Unit (20160201). The boundary for each Total Petroleum System also defines the boundary of the corresponding assessment unit and includes all trap styles and hydrocarbon producing reservoirs within the petroleum system. In both the Ghaba and Fahud Salt Basin Provinces, hydrocarbons were generated from several deeply-buried source rocks within the Infracambrian Huqf Supergroup. One general `North Oman Huqf' type oil is dominant in the Fahud Salt Basin. Oils in the Ghaba Salt Basin are linked to at least two distinct Huqf source-rock units based on oil geochemistry: a general North Oman Huqf-type oil source and a more dominant `questionable unidentified-source' or `Q'-type Huqf oil source. These two Huqf-sourced oils are commonly found as admixtures in reservoirs throughout north-central Oman. Hydrocarbons generated from Huqf sources are produced from a variety of reservoir types and ages ranging from Precambrian to Cretaceous in both the Ghaba and Fahud Salt Basin Provinces. Clastic reservoirs of the Gharif and Al Khlata Formations, Haushi Group (M. Carboniferous to L. Permian), dominate oil production in the Ghaba Salt Basin Province and form the basis for the Huqf/`Q' ? Haushi(!) TPS. In contrast, the Lower Cretaceous Shu'aiba and Middle Cretaceous Natih limestones account for most of the production in the Fahud Salt Basin with about 50 percent of the basin's production from porous, fractured Shu'aiba limestones in Yibal field, thus the name North Oman Huqf ? Shu'aiba(!) TPS. Deep gas is produced mainly from Middle Cambrian to Lower Ordovician clastic reservoirs of the Haima Supergroup. Traps in nearly all hydrocarbon accumulations of these petroleum systems are mainly structural and were formed by one or more mechanisms. These trap-forming mechanisms were mainly periodic halokinesis of the thick Cambrian Ara Salt and consequent folding and faulting from basin loading, rifting, or other major tectonic events, particularly those events forming the Oman Mountains and associated foreland-basin system during the Late Cretaceous and Late Tertiary. Many of the future new-field targets will likely be low-relief, subtle structures, as many of the large structures have been drilled. Oman's recent interest and commitments to liquid natural gas export make deep gas a primary objective in the two North Oman Huqf petroleum systems. New-field exploration of deep gas and exploring deeper targets for gas in existing fields will likely identify a significant gas resource in the next thirty years. Moreover, salt-diapir flank traps in these two North Oman Huqf petroleum systems and salt basin provinces have gone essentially untested and will likely be targeted in the near-future. The Middle Cretaceous Natih(!) TPS is a small efficient system of the Fahud Salt Basin. Natih source rocks are only mature in the Late Cretaceous/Tertiary foredeep and production is primarily from Natih reservoirs; minor production from the Shu'aiba limestone is documented along fault-dip structures. Most traps are structural and are related to development of the foreland basin and formation of the Oman Mountains. Future targets of the Natih TPS will be less obvious than those of Fahud and Natih fields and likely includ

Open-File Report↗

USGS1919

Geology of northeastern Montana

A large region in northeastern Montana has never been thoroughly explored by geologists, owing to the fact that it is a part of the Great Plains and the belief that it is too monotonous and uninteresting to tempt anyone to turn aside from the pronounced geologic features a little farther west, for which Montana is noted. This region includes parts of Sheridan, Valley, Phillips, and Blaine counties. Its investigation was begun by Smith in 1908, when he made a geologic survey of the Fort Peck Indian Reservation. Beekly explored a strip of land along the Montana-North Dakota line from Missouri River to the international boundary, and Bauer examined the townships in which Plentywood and Scobey are situated. Their results are here included with those of the writer, who during the field seasons of 1915 and 1916 was engaged in an investigation of the lignite resources of the remainder of this region, which extends from a line within 12 miles of the Montana-North Dakota boundary westward about 200 miles.

Montana↗

USGS1999

Atlas of relations between climatic parameters and distributions of important trees and shrubs in North America

This atlas explores the continental-scale relations between the geographic ranges of woody plant species and climate in North America. A 25-km equal-area grid of modern climatic and bioclimatic parameters was constructed from instrumental weather records. The geographic distributions of selected tree and shrub species were digitized, and the presence or absence of each species was determined for each cell on the 25-km grid, thus providing a basis for comparing climatic data and species distributions. The relations between climate and plant distributions are explored in graphical and tabular form. The results of this effort are primarily intended for use in biogeographic, paleoclimatic, and global-change research.

Professional Paper↗

USGS2014

Geographic information system (GIS)-based maps of Appalachian basin oil and gas fields

One of the more recent maps of Appalachian basin oil and gas fields (and the adjoining Black Warrior basin) is the U.S. Geological Survey (USGS) compilation by Mast and others (1998) (see Trippi and others, this volume, chap. I.1). This map is part of a larger oil and gas field map for the conterminous United States that was derived by Mast and others (1998) from the Well History Control System (WHCS) database of Petroleum Information, Inc. (now IHS Energy Group). Rather than constructing the map from the approximately 500,000 proprietary wells in the Appalachian and Black Warrior part of the WHCS database, Mast and others (1998) subdivided the region into a grid of 1-mi 2 (square mile) cells and allocated an appropriate type of hydrocarbon production (oil production, gas production, oil and gas production, or explored but no production) to each cell. Each 1-mi 2 cell contains from 0 to 5 or more exploratory and (or) development wells. For example, if the wells in the 1-mi 2 cell consisted of three oil wells, one gas well, and one dry well, then the cell would be characterized on the map as an area of oil and gas production. The map by Mast and others (1998) accurately shows the distribution and types of hydrocarbon accumulation in the Appalachian and Black Warrior basins, but it does not show the names of individual fields. To determine the locality and name of individual oil and gas fields, one must refer to State oil and gas maps (for example, Harper and others, 1982), which are generally published at scales of 1:250,000 or 1:500,000 (see References Cited), and (or) published journal articles. Other recent USGS Appalachian basin oil and gas field maps show the distribution of oil and gas production with a cell size as small as 0.25 mi 2 , such as the maps converted by Trippi and others (this volume, chap. I.1) from proprietary well-location maps used in the USGS 2002 assessment of oil and gas resources of the Appalachian basin (Milici and others, 2003). Another set of Appalachian basin oil and gas cell maps (based on a cell size of 0.25 mi 2 ) was created for the USGS 1995 National Assessment of United States Oil and Gas Resources (Gautier and others, 1995; Beeman and others, 1996). Between 1991 and 1994, R.T. Ryder (with R.E. Mattick, J.B. Roen, and J.R. San Filipo, USGS, Reston, Va.) compiled oil and gas fields on stable-base mylar greenline base maps (scale 1:500,000) for selected plays in the Appalachian basin. These map compilations included field names and field numbers where assigned by State agencies. The purpose of the maps was to provide supporting data for the USGS 1995 National Assessment of United States Oil and Gas Resources (Gautier and others, 1995). In particular, the greenline oil and gas field maps were linked, where possible, with production data from State records and (or) published literature in order to determine ultimate sizes for conventional fields and estimated ultimate recovery (EUR) values for wells in continuous accumulations (for definitions of the conventional and continuous terminology, see USGS National Oil and Gas Assessment Team, 1995; Schmoker, 1997; Schenk and Pollastro, 2002). This approach was used in the 1995 national oil and gas assessment because ultimate field size and EUR data were unavailable in the Appalachian region from Petroleum Information, Inc., and other commercial sources. In 2006 and 2007, the greenline Appalachian basin field maps were digitized under the supervision of Scott Kinney and converted to geographic information system (GIS) files for chapter I.1 (this volume). By converting these oil and gas field maps to a digital format and maintaining the field names where noted, they are now available for a variety of oil and gas and possibly carbon-dioxide sequestration projects. Having historical names assigned to known digitized conventional fields provides a convenient classification scheme into which cumulative production and ultimate field-size databases can be organized. Moreover, as exploratory and development drilling expands across the basin, many previously named fields that were originally treated as conventional fields have evolved into large, commonly unnamed continuous-type accumulations. These new digital maps will facilitate a comparison between EUR values from recently drilled, unnamed parts of continuous accumulations and EUR values from named fields discovered early during the exploration cycle of continuous accumulations.

Appalachian basin↗

USGS2010

Using seismic b -values to interpret seismicity rates and physical processes during the preeruptive earthquake swarm at Augustine Volcano 2005-2006: Chapter 3 in The 2006 eruption of Augustine Volcano, Alaska

We use seismic b -values to explore physical processes during the Augustine Volcano 2005–6 preeruptive earthquake swarm. The preeruptive earthquake swarm was divided into two parts: the “long swarm,” which extended from April 30, 2005, to January 10, 2006; and the "short swarm," which started 13 hours before the onset of explosive activity on January 11, 2006. Calculations of b -value for each of these swarms and for a background period were performed. The short swarm, directly preceding the eruption, had the lowest calculated b -value. In addition to the low value, the shape of the b -value plot for the short swarm appears to have two separate slopes, a shallower slope for magnitudes as great as 1.2 and a steeper slope for magnitudes greater than 1.2. Calculations of b were also run for three precursory deformation stages suggested by a separate investigation of deformation at Augustine Volcano. The highest b -value, found in stage 2, may indicate an increase in pore pressure and in thermal gradient, which matches the geodetic interpretation of a proposed dike intrusion. Finer resolution changes of b are explored through calculations of b -value versus time. An initial drop in b -value in late 2004 preceded the onset of increased seismicity. The temporal nature of this change and its timing are corroborated by atmospheric temperature data recorded on the summit of the volcano, which increased at approximately the same time. Stress at Augustine Volcano was also studied using 79 earthquakes that returned acceptable focal mechanisms between January 1, 2002, and January 10, 2006. These mechanisms and an attempted stress-tensor inversion imply that stresses within the Augustine edifice are highly variable and do not display a dominant faulting style. A population of high-frequency volcano-tectonic earthquakes during the short swarm is found to have accompanying very-long-period (20 seconds and greater) energy. Statistical analysis indicates that these earthquakes are a separate population of events. We interpret this population of earthquakes to represent a separate and distinct physical process that was not seen before the 13 hours preceding the eruption. The b -value time series also indicates that when changes in stress, pore pressure, and thermal gradient occur simultaneously, that stress effects dominate the observed b -value.

Alaska↗