USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research - Planets”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources

Evolution of the Gorda Escarpment, San Andreas fault and Mendocino triple junction from multichannel seismic data collected across the northern Vizcaino block, offshore northern California

The Gorda Escarpment is a north facing scarp immediately south of the Mendocino transform fault (the Gorda/Juan de Fuca-Pacific plate boundary) between 126°W and the Mendocino triple junction. It elevates the seafloor at the northern edge of the Vizcaino block, part of the Pacific plate, ∼1.5 km above the seafloor of the Gorda/Juan de Fuca plate to the north. Stratigraphy interpreted from multichannel seismic data across and close to the Gorda Escarpment suggests that the escarpment is a relatively recent pop-up feature caused by north-south compression across the plate boundary. Close to 126°W, the Vizcaino block acoustic basement shallows and is overlain by sediments that thin north toward the Gorda Escarpment. These sediments are tilted south and truncated at the seafloor. By contrast, in a localized region at the eastern end of the Gorda Escarpment, close to the Mendocino triple junction, the top of acoustic basement dips north and is overlain by a 2-km-thick wedge of pre-11 Ma sedimentary rocks that thickens north, toward the Gorda Escarpment. This wedge of sediments is restricted to the northeast corner of the Vizcaino block. Unless the wedge of sediments was a preexisting feature on the Vizcaino block before it was transferred from the North American to the Pacific plate, the strong spatial correlation between the sedimentary wedge and the triple junction suggests the entire Vizcaino block, with the San Andreas at its eastern boundary, has been part of the Pacific plate since significantly before 11 Ma.

Journal of Geophysical Research B: Solid Earth↗

Poroelastic rebound along the Landers 1992 earthquake surface rupture

Maps of surface displacement following the 1992 Landers, California, earthquake, generated by interferometric processing of ERS-1 synthetic aperture radar (SAR) images, reveal effects of various postseismic deformation processes along the 1992 surface rupture. The large-scale pattern of the postseismic displacement field includes large lobes, mostly visible on the west side of the fault, comparable in shape with the lobes observed in the coseismic displacement field. This pattern and the steep displacement gradient observed near the Emerson-Camp Rock fault cannot be simply explained by afterslip on deep sections of the 1992 rupture. Models show that horizontal slip occurring on a buried dislocation in a Poisson's material produces a characteristic quadripole pattern in the surface displacement field with several centimeters of vertical motion at distances of 10–20 km from the fault, yet this pattern is not observed in the postseismic interferograms. As previously proposed to explain local strain in the fault step overs [ Peltzer et al ., 1996b], we argue that poroelastic rebound caused by pore fluid flow may also occur over greater distances from the fault, compensating the vertical ground shift produced by fault afterslip. Such a rebound is explained by the gradual change of the crustal rocks' Poisson's ratio value from undrained (coseismic) to drained (postseismic) conditions as pore pressure gradients produced by the earthquake dissipate. Using the Poisson's ratio values of 0.27 and 0.31 for the drained and undrained crustal rocks, respectively, elastic dislocation models show that the combined contributions of afterslip on deep sections of the fault and poroelastic rebound can account for the range change observed in the SAR data and the horizontal displacement measured at Global Positioning System (GPS) sites along a 60-km-long transect across the Emerson fault [ Savage and Svarc , 1997]. Using a detailed surface slip distribution on the Homestead Valley, Kickapoo, and Johnson Valley faults, we modeled the poroelastic rebound in the Homestead Valley pull apart. A Poisson's ratio value of 0.35 for the undrained gouge rocks in the fault zone is required to account for the observed surface uplift in the 3.5 years following the earthquake. This large value implies a seismic velocity ratio V p /V s of 2.1, consistent with the observed low V s values of fault zone guided waves at shallow depth [ Li et al ., 1997]. The SAR data also reveal postseismic creep along shallow patches of the Eureka Peak and Burnt Mountain faults with a characteristic decay time of 0.8 years. Coseismic, dilatant hardening (locking process) followed by post-seismic, pore pressure controlled fault creep provide a plausible mechanism to account for the decay time of the observed slip rate along this section of the fault.

Journal of Geophysical Research B: Solid Earth↗

Synthetic aperture radar interferometry coherence analysis over Katmai volcano group, Alaska

The feasibility of measuring volcanic deformation or monitoring deformation of active volcanoes using space-borne synthetic aperture radar (SAR) interferometry depends on the ability to maintain phase coherence over appropriate time intervals. Using ERS 1 C band (λ=5.66 cm) SAR imagery, we studied the seasonal and temporal changes of the interferometric SAR coherence for fresh lava, weathered lava, tephra with weak water reworking, tephra with strong water reworking, and fluvial deposits representing the range of typical volcanic surface materials in the Katmai volcano group, Alaska. For interferograms based on two passes with 35 days separation taken during the same summer season, we found that coherence increases after early June, reaches a peak between the middle of July and the middle of September, and finally decreases until the middle of November when coherence is completely lost for all five sites. Fresh lava has the highest coherence, followed by either weathered lava or fluvial deposits. These surfaces maintain relatively high levels of coherence for periods up to the length of the summer season. Coherence degrades more rapidly with time for surfaces covered with tephra. For images taken in different summers, only the lavas maintained coherence well enough to provide useful interferometric images, but we found only a small reduction in coherence after the first year for surfaces with lava. Measurement of volcanic deformation is possible using summer images spaced a few years apart, as long as the surface is dominated by lavas. Our studies suggest that in order to make volcanic monitoring feasible along the Aleutian arc or other regions with similar climatic conditions, observation intervals of the satellite with C band SAR should be at least every month from July through September, every week during the late spring/early summer or late fall, and every 2–3 days during the winter.

Journal of Geophysical Research B: Solid Earth↗

Mapping the rupture process of moderate earthquakes by inverting accelerograms

We present a waveform inversion method that uses recordings of small events as Green's functions to map the rupture growth of moderate earthquakes. The method fits P and S waveforms from many stations simultaneously in an iterative procedure to estimate the subevent rupture time and amplitude relative to the Green's function event. We invert the accelerograms written by two moderate Parkfield earthquakes using smaller events as Green's functions. The first earthquake ( M = 4.6) occurred on November 14, 1993, at a depth of 11 km under Middle Mountain, in the assumed preparation zone for the next Parkfield main shock. The second earthquake ( M = 4.7) occurred on December 20, 1994, some 6 km to the southeast, at a depth of 9 km on a section of the San Andreas fault with no previous microseismicity and little inferred coseismic slip in the 1966 Parkfield earthquake. The inversion results are strikingly different for the two events. The average stress release in the 1993 event was 50 bars, distributed over a geometrically complex area of 0.9 km 2 . The average stress release in the 1994 event was only 6 bars, distributed over a roughly elliptical area of 20 km 2 . The ruptures of both events appear to grow spasmodically into relatively complex shapes: the inversion only constrains the ruptures to grow more slowly than the S wave velocity but does not use smoothness constraints.

Journal of Geophysical Research B: Solid Earth↗

Closing the gap between regional and global travel time tomography

Recent global travel time tomography studies by Zhou [1996] and van der Hilst et al . [1997] have been performed with cell parameterizations of the order of those frequently used in regional tomography studies (i.e., with cell sizes of 1°–2°). These new global models constitute a considerable improvement over previous results that were obtained with rather coarse parameterizations (5° cells). The inferred structures are, however, of larger scale than is usually obtained in regional models, and it is not clear where and if individual cells are actually resolved. This study aims at resolving lateral heterogeneity on scales as small as 0.6° in the upper mantle and 1.2°–3° in the lower mantle. This allows for the adequate mapping of expected small-scale structures induced by, for example, lithosphere subduction, deep mantle upwellings, and mid-ocean ridges. There are three major contributions that allow for this advancement. First, we employ an irregular grid of nonoverlapping cells adapted to the heterogeneous sampling of the Earth's mantle by seismic waves [ Spakman and Bijwaard , 1998]. Second, we exploit the global data set of Engdahl et al . [1998], which is a reprocessed version of the global data set of the International Seismological Centre. Their reprocessing included hypocenter redetermination and phase reidentification. Finally, we combine all data used ( P , pP , and pwP phases) into nearly 5 million ray bundles with a limited spatial extent such that averaging over large mantle volumes is prevented while the signal-to-noise ratio is improved. In the approximate solution of the huge inverse problem we obtain a variance reduction of 57.1%. Synthetic sensitivity tests indicate horizontal resolution on the scale of the smallest cells (0.6° or 1.2°) in the shallow parts of subduction zones decreasing to approximately 2°–3° resolution in well-sampled regions in the lower mantle. Vertical resolution can be worse (up to several hundreds of kilometers) in subduction zones with rays predominantly pointing along dip. Important features of the solution are as follows: 100–200 km thick high-velocity slabs beneath all major subduction zones, sometimes flattening in the transition zone and sometimes directly penetrating into the lower mantle; large high-velocity anomalies in the lower mantle that have been attributed to subduction of the Tethys ocean and the Farallon plate; and low-velocity anomalies continuing across the 660 km discontinuity to hotspots at the surface under Iceland, east Africa, the Canary Islands, Yellowstone, and the Society Islands. Our findings corroborate that the 660 km boundary may resist but not prevent (present day) large-scale mass transfer from upper to lower mantle or vice versa. This observation confirms the results of previous, global mantle studies that employed coarser parameterizations.

Journal of Geophysical Research B: Solid Earth↗

Seismic structure of the southern Cascadia subduction zone and accretionary prism north of the Mendocino triple junction

Four multichannel-seismic reflection profiles, collected as part of the Mendocino triple junction seismic experiment, image the toe of the southern Cascadia accretionary prism. Today, 250–600 m of sediment is subducting with the Gorda plate, and 1500–3200 m is accreting to the northern California margin. Faults imaged west and east of the deformation front show mixed structural vergence. A north-south trending, 20 km long portion of the central margin is landward vergent for the outer 6–8 km of the toe of the prism. This region of landward vergence exhibits no frontal thrust, is unusually steep and narrow, and is likely caused by a seaward-dipping backstop close to the deformation front. The lack of margin-wide preferred seaward vergence and wedge-taper analysis suggests the prism has low basal shear stress. The three southern lines image wedge-shaped fragments of oceanic crust 1.1–7.3 km in width and 250–700 m thick near the deformation front. These wedges suggest shortening and thickening of the upper oceanic crust. Discontinuities in the seafloor west of the prism provide evidence for mass wasting in the form of slump blocks and debris fans. The southernmost profile extends 75 km west of the prism imaging numerous faults that offset both the Gorda basin oceanic crust and overlying sediments. These high-angle faults, bounding basement highs, are interpreted as strike-slip faults reactivating structures originally formed at the spreading ridge. Northeast or northwest trending strike-slip faults within the basin are consistent with published focal mechanism solutions and are likely caused by north-south Gorda-Pacific plate convergence.

Journal of Geophysical Research B: Solid Earth↗

Coseismic slip resolution along a plate boundary megathrust: the Nankai Trough, southwest Japan

Geodetic survey measurements are used to estimate the coseismic slip distribution in the 1944 Tonankai (M w =8.1) and 1946 Nankaido (M w =8.3) earthquakes and to assess quantitatively the degree to which this slip is resolved on the plate boundary megathrust. Data used include 798 angle changes from triangulation surveys, 328 leveling section differences, and 5 coseismic tidal gage offsets. Many of the nominally coseismic triangulation data span ∼50 years, nearly half the earthquake cycle, and correction for interseismic deformation using post-1950 observations is applied. Microseismicity is used to define the configuration of the plate boundary interface and approximate it with a continuous, multisegment fault model. Because the onshore geodetic data have very limited resolving power for offshore fault segments, offshore coseismic slip was constrained by Satctke's [1993] estimation based on tsunami data. The majority of the coseismic slip occurs between 15 and 25 km depth. Although resolution declines toward the trench axis, it is sufficiently good to define two distinct high-slip regions, one off southeastern Shikoku Island (11 m maximum) and the other offshore of Kii Peninsula (3 m maximum). The slip magnitude off southeastern Shikoku, coupled with the plate convergence rate, would imply an recurrence interval of about 270 years, much-longer than the average repeat time of ∼120 years for historical great earthquakes on the Nankai Trough. However, the maximum coseismic slip is sensitive to the assumed fault geometry, and slippage on trough-parallel splay faults could significantly decrease the maximum slip to about 6 m.

Journal of Geophysical Research B: Solid Earth↗

Greenland Sea Odden sea ice feature: Intra-annual and interannual variability

The “Odden” is a large sea ice feature that forms in the east Greenland Sea that may protrude eastward to 5°E from the main sea ice pack (at about 8°W) between 73° and 77°N. It generally forms at the beginning of the winter season and can cover 300,000 km 2 . Throughout the winter the outer edge of the Odden may advance and retreat by several hundred kilometers on timescales of a few days to weeks. Satellite passive microwave observations from 1978 through 1995 provide a continuous record of the spatial and temporal variations of this extremely dynamic phenomenon. Aircraft synthetic aperture radar, satellite passive microwave, and ship observations in the Odden show that the Odden consists of new ice types, rather than older ice types advected eastward from the main pack. The 17-year record shows both strong interannual and intra-annual variations in Odden extent and temporal behavior. For example, in 1983 the Odden was weak, in 1984 the Odden did not occur, and in 1985 the Odden returned late in the season. An analysis of the ice area and extent time series derived from the satellite passive microwave observations along with meteorological data from the International Arctic Buoy Program (IABP) determined the meteorological forcing associated with Odden growth, maintenance, and decay. The key meteorological parameters that are related to the rapid ice formation and decay associated with the Odden are, in order of importance, air temperature, wind speed, and wind direction. Oceanographic parameters must play an important role in controlling Odden formation, but it is not yet possible to quantify this role because of a lack of long-term oceanographic observations.

Journal of Geophysical Research C: Oceans↗

Physical characteristics of summer sea ice across the Arctic Ocean

Sea ice characteristics were investigated during July and August on the 1994 transect across the Arctic Ocean. Properties examined from ice cores included salinity, temperature, and ice structure. Salinities measured near zero at the surface, increasing to 3–4‰ at the ice-water interface. Ice crystal texture was dominated by columnar ice, comprising 90% of the ice sampled. Surface albedos of various ice types, measured with radiometers, showed integrated shortwave albedos of 0.1 to 0.3 for melt ponds, 0.5 for bare, discolored ice, and 0.6 to 0.8 for a deteriorated surface or snow-covered ice. Aerial photography was utilized to document the distribution of open melt ponds, which decreased from 12% coverage of the ice surface in late July at 76°N to almost none in mid-August at 88°N. Most melt ponds were shallow, and depth bore no relationship to size. Sediment was pervasive from the southern Chukchi Sea to the north pole, occurring in bands or patches. It was absent in the Eurasian Arctic, where it had been observed on earlier expeditions. Calculations of reverse trajectories of the sediment-bearing floes suggest that the southernmost sediment was entrained during ice formation in the Beaufort Sea while more northerly samples probably originated in the East Siberian Sea, some as far west as the New Siberian Islands.

Journal of Geophysical Research C: Oceans↗

Winter and early spring CO2 efflux from tundra communities of northern Alaska

Carbon dioxide concentrations through snow were measured in different arctic tundra communities on the North Slope of Alaska during winter and early spring of 1996. Subnivean CO 2 concentrations were always higher than atmospheric CO 2 . A steady state diffusion model was used to generate conservative estimates of CO 2 flux to the atmosphere. The magnitude of CO 2 efflux differed with tundra community type, and rates of carbon release increased from March to May. Winter CO 2 efflux was highest in riparian and snow bed communities and lowest in dry heath, upland tussock, and wet sedge communities. Snow generally accrues earlier in winter and is deeper in riparian and snow bed communities compared with other tundra communities, which are typically windswept and do not accumulate much snow during the winter. These results support the hypothesis that early and deep snow accumulation may insulate microbial populations from very cold temperatures, allowing sites with earlier snow cover to sustain higher levels of activity throughout winter compared to communities that have later developing snow cover. Extrapolating our estimates of CO 2 efflux to the entire snow-covered season indicates that total carbon flux during winter in the Arctic is 13–109 kg CO 2 -C ha −1 , depending on the vegetation community type. Wintertime CO 2 flux is a potentially important, yet largely overlooked, part of the annual carbon cycle of tundra, and carbon release during winter should be accounted for in estimates of annual carbon balance in arctic ecosystems.

Journal of Geophysical Research D: Atmospheres↗

Analysis of simulated advanced spaceborne thermal emission and reflection (ASTER) radiometer data of the Iron Hill, Colorado, study area for mapping lithologies

The advanced spaceborne thermal emission and reflection (ASTER) radiometer was designed to record reflected energy in nine channels with 15 or 30 m resolution, including stereoscopic images, and emitted energy in five channels with 90 m resolution from the NASA Earth Observing System AMI platform. A simulated ASTER data set was produced for the Iron Hill, Colorado, study area by resampling calibrated, registered airborne visible/infrared imaging spectrometer (AVIRIS) data, and thermal infrared multispectral scanner (TIMS) data to the appropriate spatial and spectral parameters. A digital elevation model was obtained to simulate ASTER-derived topographic data. The main lithologic units in the area are granitic rocks and felsite into which a carbonatite stock and associated alkalic igneous rocks were intruded; these rocks are locally covered by Jurassic sandstone, Tertiary rhyolitic tuff, and colluvial deposits. Several methods were evaluated for mapping the main lithologic units, including the unsupervised classification and spectral curve-matching techniques. In the five thermalinfrared (TIR) channels, comparison of the results of linear spectral unmixing and unsupervised classification with published geologic maps showed that the main lithologic units were mapped, but large areas with moderate to dense tree cover were not mapped in the TIR data. Compared to TIMS data, simulated ASTER data permitted slightly less discrimination in the mafic alkalic rock series, and carbonatite was not mapped in the TIMS nor in the simulated ASTER TIR data. In the nine visible and near-infrared channels, unsupervised classification did not yield useful results, but both the spectral linear unmixing and the matched filter techniques produced useful results, including mapping calcitic and dolomitic carbonatite exposures, travertine in hot spring deposits, kaolinite in argillized sandstone and tuff, and muscovite in sericitized granite and felsite, as well as commonly occurring illite/muscovite. However, the distinction made in AVIRIS data between calcite and dolomite was not consistently feasible in the simulated ASTER data. Comparison of the lithologie information produced by spectral analysis of the simulated ASTER data to a photogeologic interpretation of a simulated ASTER color image illustrates the high potential of spectral analysis of ASTER data to geologic interpretation.

Journal of Geophysical Research D: Atmospheres↗

Simulating the water balance of the Aral Sea with a coupled regional climate-lake model

Before coupled atmosphere-lake models can be used to study the response of large lake systems to climatic forcings, we must first evaluate how well they simulate the water balance and associated lake atmosphere interactions under present-day conditions. We evaluate the hydrology simulated by a lake model coupled to NCAR's regional climate model (RegCM2) in a study of the Aral Sea. The meteorological variables that are input to the lake model are simulated well by RegCM2. Simulated surface air temperatures closely match observed values, except during spring and fall when the simulated temperatures are too cold. The magnitude of precipitation is too high in the region surrounding the Aral Sea during summer and fall. On a yearly basis, RegCM2 produces a reasonable amount of runoff throughout the drainage basin. The lake model coupled to RegCM2 accurately simulates Aral Sea surface temperatures (SSTs). The lake model also simulates observed mid-winter ice fraction well, although the onset of ice growth occurs too late in the year and the ice melts too rapidly in the spring. The simulated annual evaporation from the Aral Sea is consistent with observed estimates; however, the simulated evaporation is greater than observed during summer and less than observed during winter. In a “stand-alone” lake model simulation, the simulated Aral Sea hydrology does not match observations as closely as in the coupled model experiment. These results suggest that a stand-alone lake model would not accurately simulate the hydrologic response of the Aral Sea to various forcings.

Journal of Geophysical Research D: Atmospheres↗

Television observations from Surveyor 3

A total of 6315 pictures were taken by the television camera on Surveyor 3 after the lunar landing. These pictures have provided much new information about the location of the landing site on the moon, the detailed topographic and geologic characteristics of the lunar surface, and the appearance of the earth as seen from the moon, both during eclipse of the sun and during partial direct illumination by the sun. Surveyor 3 landed in a subdued crater slightly more than 200 meters in diameter, which has a low rounded rim and is about 15 meters deep. The spacecraft is situated on the east wall of the crater, about half way between the center of the crater and the rim crest. The spacecraft is inclined 14.7° ± 1.0° toward the west. The selenographic coordinates of the landing site are 2.94°S latitude, 23.34°W longitude, relative to selenodetic control adopted by the Aeronautical Chart and Information Center. Small morphologic elements of the landing site include small craters, linear ridges and troughs, and fragmental debris. The craters and fragmental debris resemble those observed at the Surveyor 1 landing site, both in distribution of shape and in distribution of size. Most of the craters in Surveyor 1 and 3 pictures are inferred to be of impact origin. Their size-frequency distribution corresponds to the distribution that would be produced by repetitive bombardment by meteoroids, a bombardment sufficiently prolonged that the crater population has reached a steady state or has come to equilibrium. Some of the craters observed at the Surveyor 3 landing site are inferred to be of secondary impact origin, and some probably have been formed either by subsidence or by drainage of fragmental debris into cracks or fissures in the subsurface. Fragmental debris at the landing site is inferred to have been derived primarily by the same process of repetitive bombardment that produced the majority of craters. The inferred volumetric size-frequency distribution of fragments, derived from the observed size distribution of fragments on the surface, is similar to the distribution that would be produced by repetitive bombardment of coherent rocks by meteoroids with a mass-frequency distribution like that found from observed meteors and recovered meteorites on earth. Two prominent strewn fields of blocky debris were observed around two craters, 13 and 15 meters across, at the Surveyor 3 site. The 13-meter crater has a sharp raised rim, and the 15-meter crater has a more subdued rounded rim. The blocks associated with the subdued crater have twice as high a mean roundness as the blocks associated with the raised-rim crater, and they are much more deeply buried. The size-frequency distribution function for the fragments in each of the strewn fields of blocks resembles the size-frequency distribution for fragments ejected by impacts in strong rock, such as Meteor Crater, Arizona. Most of the fragments at the surface of the Surveyor 3 landing site are evidently part of a layer of fragmental material of low cohesion that is at least 1 meter thick along the upper parts of the wall of the crater in which Surveyor 3 landed and may be much thicker near the center of the crater. The evidence from the Surveyor 3 pictures suggests that this layer of debris, or regolith, is subject to downslope creep or mass movement. Creep is probably caused by seismic shaking, due mainly to near and far impact events and perhaps due partly to internal lunar seismicity. Disturbances of the lunar surface produced by Surveyor 3, like those produced by Surveyor 1, exposed material at depths of a few centimeters or less that was darker than the material at the surface. The albedo of the fine-grained fragmental debris is probably 20 to 30% lower at depths of only a fraction of a millimeter than it is at the optically observed surface. All coarse fragments protruding above the general level of the surface have a higher albedo than the fine-grained matrix of the surface. These general photometric relationships can be explained if it is assumed that the surfaces of the particles in the shallow lunar subsurface tend to become coated with a dark substance; the term proposed for this hypothetical substance is ‘lunar varnish’ On the protruding surface of blocks and coarse fragments the lunar varnish is scrubbed off by the processes that cause rounding. The exposed surfaces of fine particles on the lunar surface are similarly affected, but, because they are mixed relatively rapidly with particles just beneath the surface, the process is incomplete and the fine-grained material exposed at the lunar surface, therefore, has a lower albedo than blocks and other large fragments. Coating of particles by lunar varnish evidently takes place just beneath the surface. The estimated normal luminance factor (normal albedo) of an undisturbed part of the lunar surface next to footpad 2 of the Surveyor 3 spacecraft is 8.5%. An area of the lunar surface disturbed by the surface sampler has an estimated normal luminance factor of 6.6%, and fine-grained material placed on footpad 2 by the surface sampler has an estimated normal luminance factor of 7.6%. The errors in all these estimates may be as high as 25% because of uncertainties of correction required for light scattered from the camera mirror. Preliminary search for color differences, by color reconstitution methods, revealed no determinable differences in color among various coarse blocks, the fine-grained matrix of the surface, or fine-grained material disturbed by the surface sampler. Surveyor 3 pictures of the eclipse of the sun by the earth revealed a bright region in the refraction halo surrounding the earth, which was correlated with the position of the sun, and a series of bright beads that occurred over regions of the earth largely clear of clouds. Clouds tend to occult the refracted rays of the sun, most of which pass through the lower part of the atmosphere at the limb; the beads occurred in the depressions in the optical silhouette of the earth. Preliminary reduction of the color of the refracted light showed that the brightest region, near the position of the sun, exhibited a correlated color temperature close to 4800°K. The color temperature tended to be lower for light that followed paths of greater atmospheric absorption. Preliminary analysis of Surveyor 3 pictures of the partly illuminated earth revealed colors similar to the colors recorded from orbit by the Mercury and Gemini astronauts.

Journal of Geophysical Research↗

Lunar theory and processes

Despite the fact that the Surveyor 3 landed in a crater, the general appearance of the terrain is remarkably similar to that revealed by Surveyor 1. Evidence of the transport of material down the crater wall was observed. Some picture degradation occurred, apparently as a result of fine particulate lunar surface material being deposited on the TV system mirror during the unusual landing.

Journal of Geophysical Research↗

Rapid heat-flowing surveying of geothermal areas, utilizing individual snowfalls as calorimeters

Local differences in rate of heat transfer in vapor and by conduction through the ground in hot spring areas are difficult and time-consuming to measure quantitatively. Individual heavy snowfalls provide a rapid low-cost means of measuring total heat flow from such ground. After a favorable snowfall (heavy, brief duration, little wind, air temperature near 0°C), contacts between snow-covered and snow-free ground are mapped on a suitable base. Each mapped contact, as time elapses after a specific snowfall, is a heat-flow contour representing a decreasing rate of flow. Calibration of each mapped contact or snow line is made possible by the fact that snow remains on insulated surfaces (such as the boardwalks of Yellowstone's thermal areas) long after it has melted on adjacent warm ground. Heat-flow contours mapped to date range from 450 to 5500 μcal/cm 2 sec, or 300 to 3700 times the world average of conductive heat flow. The very high rates of heat flow (2000 to > 10,000 μcal/cm 2 sec) are probably too high, and the lower heat flows determinable by the method (<500 μcal/cm 2 sec) may be too low. Values indicated by the method are, however, probably within a factor of 2 of the total conductive and convective heat flow. Thermal anomalies from infrared imagery are similar in shape to heat-flow contours of a test area near Old Faithful geyser. Snowfall calorimetry provides a rapid means for evaluating the imagery and computer-derived products of the infrared data in terms of heat flow.

Yellowstone National Park↗

Implications of the Surveyor 7 results

The chemical and television data from the Surveyor 7 mission are discussed. The significance of the α-scattering analysis is found to depend on whether the flow unit underlying the spacecraft was laid down by mass flow at the time of the Tycho-forming impact. The chemical composition of the site is significantly lower in Fe than the composition of the previously analyzed mare sites; no other resolvable distinctions can be made. The higher albedo of the highlands is attributed to the lower iron content in the silicate minerals. By assigning the atomic composition to minerals common in basaltic rocks, we estimate-the highland rock density to be 3.0 and the mare density to be 3.2. The densities may be incorporated into a discussion of recent information on the gravitational field of the moon, yielding estimates of crustal thickness in the highlands around 30 to 50 km. A number of television pictures of rocks and fragments are shown, and we offer some suggestions about the type and origin of these objects. They compose a heterogeneous population in which the brighter rocks seem to be more resistant to mechanical breakdown than the dark rocks. The characteristics of the fine-grained component of the surface mantle are found to be similar to those at earlier Surveyor sites. The process of eroding exposed rocks and covering them with a blanket of fine particles appears to be relatively less advanced than at the sites previously studied; A bright line of light was seen on the western horizon after sunset, as was observed during Surveyor 5 and 6; this rather puzzling phenomenon is discussed again.

Journal of Geophysical Research↗

Observations of the lunar regolith and the Earth from the television camera on Surveyor 7

Surveyor 7, the last spacecraft of the Surveyor series, landed about 30 km north of the rim crest of Tycho, one of the most prominent and well-known features in the southern part of the moon. About 21,000 pictures were transmitted during two lunar days of operation. At the Surveyor 7 site, the cumulative size-frequency distribution of craters 13 cm to 3 meters in diameter follows closely the distribution of craters observed at the other Surveyor sites in the lunar maria. This distribution of small craters is believed to be a steady-state distribution.

Journal of Geophysical Research↗

Surface coating effects in remote sensing measurements

Measurements of the infrared spectra of a liquid-(water) coated quartz substrate and a solid-(pyrophyllite) coated quartzite are compared to theoretical values. Results demonstrate that in the case of the water-coated quartz, a loss in spectral contrast of the quartz emission occurs at the principal restrahlen wavelengths of 8.5, 9.0, and 12.5 µ but is most pronounced at 12.5 µ. In the case of pyrophyllite-coated quartzite, additional spectral features appear between 8.0 and 10.0 µ as the exposure of quartzite through the pyrophyllite coating is increased. Addition of the pure quartzite and pyrophyllite spectra, weighted by exposed area, is shown to satisfactorily describe the composite spectra.

Journal of Geophysical Research↗