SEARCH · USGS Science

Results for “The Mountain Geologist”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 77Linked to original sources

USGS2026

Streamflow, water quality, and constituent loads and yields, Scituate Reservoir drainage area, Rhode Island, water year 2023

As part of a long-term cooperative program to monitor water quality within the Scituate Reservoir drainage area, the U.S. Geological Survey, in cooperation with Providence Water (formerly the Providence Water Supply Board), collected streamflow and water-quality data in tributaries to the Scituate Reservoir, Rhode Island. Streamflow and concentrations of chloride and sodium estimated from records of specific conductance for 16 tributaries were used to calculate loads of chloride and sodium during water year 2023 (October 1, 2022, through September 30, 2023). Water-quality samples were collected by Providence Water at 38 sampling stations on tributaries to the Scituate Reservoir during water year 2023. These water-quality data are summarized by using values of central tendency and are used, in combination with measured (or estimated) streamflows, to calculate loads and yields of selected water-quality constituents for water year 2023. Annual mean streamflows for monitoring stations in this study ranged from 0.47 to 34.4 cubic feet per second during water year 2023. At the 16 continuous-record streamgages, tributaries transported about 3,000 metric tons of chloride and 1,900 metric tons of sodium to the Scituate Reservoir; annual chloride yields for the tributaries ranged from 19 to 200 metric tons per square mile, and annual sodium yields ranged from 13 to 120 metric tons per square mile. At the stations where water-quality samples were collected by Providence Water, the medians of the median daily loads were 65,000 million colony forming units per day for coliform bacteria, 870 million colony forming units per day for Escherichia coli , 200 kilograms per day for chloride, 8.2 grams per day as nitrogen for nitrite, 520 grams per day as nitrogen for nitrate, and 300 grams per day as orthophosphate for phosphate. The medians of the median yields were 25,000 million colony forming units per day per square mile for coliform bacteria, 600 million colony forming units per day per square mile for Escherichia coli , 65 kilograms per day per square mile for chloride, 4.6 grams per day per square mile as nitrogen for nitrite, 180 grams per day per square mile as nitrogen for nitrate, and 180 grams per day per square mile as orthophosphate for phosphate.

Rhode Island↗

USGS2024

A methodology to estimate CO2 and energy gas storage resources in depleted conventional gas reservoirs

Depleted hydrocarbon reservoirs are subsurface geological structures capable of sequestering vast quantities of carbon dioxide (CO 2 ) as well as storing other energy gases for later usage, such as natural gas, and potentially hydrogen (H 2 ). Here we outline a methodology to quantify multi-gas storage resources in depleted conventional gas reservoirs for usage in assessments by the United States Geological Survey (USGS) at the scale of sedimentary basins. The methodology consists first of quantifying accessible pore volume in a depleted reservoir for natural gas storage using up to three equations. Input data are derived from commonly reported or estimated reservoir parameters and natural gas production volumes, and equations may be combined in linear models to improve pore volume estimates. Storage estimates from these equations are tested and validated for 31 reservoirs in the Michigan Basin Province, USA that were previously converted to underground gas storage facilities and have known (federally reported) natural gas storage capacities. Secondly, natural gas storage capacities can be transformed via fluid substitution calculations to estimate the storage resources for non-native fluids, applied here for, CO 2 , H 2 , and methane-H 2 blends, accounting for molecule-specific deviations from ideal gas behavior at reservoir pressures and temperatures as well as differing storage efficiencies. Importantly, the storage of non-native fluids may not be appropriate in all depleted gas reservoir settings due to potential risks like leakage, in particular in the case of H 2 storage, requiring additional knowledge of caprock sealing capacity. Given this caveat, we demonstrate the fluid substitution method for natural gas reservoirs of the Northern Niagaran Reef and Southern Niagaran Reef USGS plays in the Michigan Basin Province, as these trends of Silurian pinnacle reefs are capped with tight-sealing evaporite facies. The deterministic equations outlined from this methodology can be incorporated into future probabilistic USGS gas storage assessments for CO 2 , H 2 , and natural gas resources in the United States.

Michigan↗

USGS2026

Determination of baseline water-quality conditions using continuous specific conductance and discrete measurements of total dissolved solids and selected major ions, Arkansas River Basin, Colorado

From 2022 through 2024, the U.S. Geological Survey (USGS) in cooperation with the Regional Resources Planning Group (Southeastern Colorado Water Conservancy District, Colorado Springs Utilities, Pueblo Water, Lower Arkansas Valley Water Conservancy District, Aurora Water, and Upper Arkansas Water Conservancy District) established a basinwide water-quality monitoring network in the Arkansas River Basin in Colorado. The study leveraged ongoing continuous measurements of streamflow and specific conductance (SC) at 13 sites along the main stem Arkansas River and Fountain Creek from the USGS 07108600 Arkansas River at Granite, Colo., (Ark Granite) site to the USGS 07137500 Arkansas River near Coolidge, Kansas, (Ark Coolidge) site. Baseline water-quality conditions were established using data from October 1989 through September 2022 to help identify changes in water quality that could result from changes in land and water use. Total dissolved solids (TDS) concentration was the main indicator of general water quality in this study because it can be accurately estimated from SC and is sensitive to changes in streamflow, water operations, and source contributions. Median TDS concentrations in Arkansas River samples (October 1989 through December 2023) ranged from 75 milligrams per liter (mg/L) at Ark Granite near the headwaters to 3,660 mg/L at Ark Coolidge near the Colorado–Kansas State line. Distinct seasonal differences in median streamflow and TDS were apparent during the winter and summer months. Seasonal Kendall tests showed no significant trends in monthly mean streamflow (October 1995 through September 2022) at Arkansas River sites upstream from Pueblo Reservoir. Upward trends in TDS concentrations and loads occurred only at Ark Granite. Downward trends in streamflow, TDS concentrations, and TDS loads occurred at Arkansas River sites from USGS 07109500 Arkansas River near Avondale, Colo., to Ark Coolidge. Downward trends in streamflow and SC (surrogate for TDS) were more prevalent during winter base flow months and may indicate changes in groundwater quantity, and possibly groundwater quality, potentially affecting the river water-quality condition.

Colorado↗

USGS2025

Fossil diatoms in Arctic marine surface sediments

Diatoms are one of the main constituents of marine phytoplankton in the Arctic, and thanks to their siliceous skeletons, diatom fossils are relatively well preserved in sediments. Due to their species-specific sensitivity to different ocean conditions, their abundance and assemblages in sediments are routinely used by paleoceanographers to reconstruct the state of the surface ocean in the past (Koç 2007). By using statistical methods, we can obtain valuable knowledge about their ecological preferences (Oksman et al. 2019) and generate quantitative reconstructions of various parameters, such as sea-surface temperature and sea-ice concentration through time (Krawczyk et al. 2021; Sha et al. 2014). The Marine Arctic Diatoms (MARDI) working group (WG) ( pastglobalchanges.org/mardi ) aims to advance knowledge on marine-diatom ecology and diatom-based reconstructions by compiling and harmonizing data from surface-sediment samples across the Arctic.

Pages Magazine↗

USGS2025

Simulation of groundwater flow in Wake County, North Carolina, 2000 through 2070

In 2019, the U.S. Geological Survey and Wake County Environmental Services began a collaborative study to evaluate groundwater resources and long-term groundwater availability in the county’s fractured-rock groundwater system. Wake County, in central North Carolina, is experiencing rapid population growth, associated land development, and changing water use. Hydrogeologic data including groundwater levels, aquifer testing, borehole fracture flow measurements, water-quality samples, and groundwater age-dating tracers were collected, along with findings from previous investigations, to help inform a conceptual model of the flow system used to develop a modular three-dimensional finite-difference groundwater-flow model (MODFLOW) for simulating historical and future groundwater conditions from 2000 to 2070. Hydraulic conductivity and transmissivity ranges were estimated from 17 slug tests and 21 borehole-flow measurements. Groundwater-quality analytical results from 19 sampling sites indicate that oxidation-reduction (redox) conditions varied within the regolith and bedrock and that minimal evaporation occurred before recharge entered the groundwater system. Age dating revealed mixtures of older and younger water, ranging from the 1940s to the 1990s—indicating variable flow pathways of recharge within permeable bedrock fracture zones. To simplify the complex fractured-rock groundwater system, two layers representing the regolith and the fractured bedrock were used in the MODFLOW model. Model calibration included parameter estimation and provided a reasonable fit to observed groundwater levels and estimated stream base flows. The model forecast scenarios incorporated future climate-model data for two emissions scenarios with land cover change projections to simulate potential impacts to future groundwater levels, recharge, and base flows. Recharge and base flow projections were largely within historical ranges, with no apparent long-term trends, but did indicate a slight downward shift in median values—likely, in part, because of differences in spatial resolution of input climate datasets. Seasonal patterns were consistent with historical data, with projections of possible increases in future winter recharge. Model limitations are discussed, and additional monitoring and model refinement needs are highlighted to support decision making for local groundwater management.

North Carolina↗

USGS2024

Identifying transportation data and system needs for a Federal lands transportation data platform

Executive Summary Modern transportation and land-use planning efforts include information from many sources to address topics such as safety, efficiency, commercial, and social needs. This wide breadth of topics provides opportunities for collaboration and development of common tools for diverse users. In many cases, different information systems provide the spatial data and geographic content necessary for transportation and land-use planners to consider multiple lines of evidence. The Federal Highway Administration Office of Federal Lands Highway (FLH) and Federal Land Management Agency partners use detailed spatial and quantitative data to inform transportation decisions. However, logistic challenges to data sharing exist because data are often managed by separate agencies; data-exchange frameworks and interagency data agreements are insufficient; and consistency from aggregated data requires maintenance, coordination, and supporting infrastructure. The FLH and U.S. Geological Survey collaboratively examined (1) use and availability of spatial data for transportation planning and (2) a possible mechanism to use more shared and consistent data in a common planning environment. The goals of this collaborative effort were to describe data needs from the perspective of planners and to identify opportunities for shared data resources. Results presented here focus on two workshops and a subsequent investigation of data and tools available from partner agencies. The objectives of this report are to (1) describe information used in transportation planning with geographic data; (2) identify spatially explicit data that inform transportation plans and could be shared among all partners; and (3) describe current platforms, planning and administrative opportunities, and potential barriers to developing an integrated planning tool. Key information and data needs were identified in three major classes: system, user, and influential factors. System data are parts of the transportation network and information about the condition of individual segments and the network. User data provide details about the function of the system and insights into potential needs; for example, user trips between source and destinations inform road and network demands that can lead to congestion and safety issues (in the future, user data might also include scenarios and projections based on land-use plans). Influential data represent social and environmental factors that influence transit demands and network conditions. These factors could be popular locations or seasonal events that influence demand and congestion; wildlife habitat or migration intersections that affect safety and management priorities; or geologic features that influence hazards, maintenance, and safety. Responses described here provide specific information for web-tool design and give a framework for interagency communication and cooperation to address specific information needs for integrated planning. Existing web-mapping and web-services, and the data that inform them, are also described. Commonly, these data are created and published by one agency, and the core users are outside of that agency; for example, threatened species distributions are published by the U.S. Fish and Wildlife Service for consideration by planners in advance of National Environmental Policy Act (42 U.S.C. 4321 et seq.) evaluation. This report is provided to inform FLH leaders and Federal Land Management Agency partners by articulating user needs and requirements for integrated planning tool(s). Programmers creating a secure web-based data-sharing platform (with data-viewing, -analysis and -download functions) can use the information presented here to organize data and user interfaces. This integrated perspective can help FLH and Federal Land Management Agency partners develop transportation networks that better serve the needs of people in local communities and across States and the Nation.

Open-File Report↗

USGS2024

Aboveground carbon stocks across a hydrological gradient: Ghost forests to non-tidal freshwater forested wetlands

Upper estuarine forested wetlands (UEFWs) play an important role in the sequestration of atmospheric carbon (C), which is facilitated by their position at the boundary of terrestrial and maritime environments but threatened by sea level rise. This study assessed the change in aboveground C stocks along the estuarine–riverine hydrogeomorphic gradient spanning salt-impacted freshwater tidal forested wetlands to freshwater forested wetlands in seasonally tidal and nontidal landscape positions. Standing stocks of C in forested wetlands were measured along two major coastal river systems, the Winyah Bay in South Carolina and the Savannah River in Georgia (USA), replicating and expanding a previous study to allow the assessment of change over time. Aboveground C stocks on these systems averaged 172.9 Mg C ha −1 , comparable to those found in UEFWs across the globe and distinct from the terrestrial forested ecosystems they are often considered to be a part of during large-scale C inventory efforts. Groundwater salinity conditions as low as 1.3 ppt were observed in conjunction with losses of aboveground C. When viewed in context alongside expected sea level rise and corresponding saltwater intrusion estimates, these data suggest a marked decrease in aboveground C stocks in forested wetlands situated in and around tidal estuaries.

Georgia, South Carolina↗

USGS2025

Avak Creek oil occurrence, North Slope, Alaska: Newly discovered oil seep on Native lands, near village of Utqiagvik

An unknown occurrence of oil was detected near Avak Creek on Native lands on the North Slope of Alaska. Determining the source of oil was imperative for allowing stakeholders (Federal, State, and local government agencies and the landowner, an Alaska Native corporation) to make timely and informed decisions and mount a mitigation response, if required. The regional and local geological framework of the Avak Creek site was constructed using seismic surveys, well data, and basin modeling results, to identify local petroleum systems, map structural geometry and faults, define source rock thermal maturity distributions, and infer likely oil-migration pathways. Molecular hydrocarbon fingerprints (biomarkers, diamondoids, compound-specific isotopes) of the oil were compared to those of local and regional oil seeps, exploration well tests, and produced oils. Biomarker acid distributions characterized the history and extent of petroleum biodegradation. Integrating subsurface and geochemical parameters, the oil is interpreted to be a natural seep generated locally, predominantly from the Brookian Lower Cretaceous Hue Shale/gamma-ray zone, rather than an anthropogenic source of pollution. Results highlight sophisticated analytical technologies used to characterize complex, compositionally altered hydrocarbons. Results also advance our understanding of Brookian source rock distribution, subsurface petroleum migration pathways, and Arctic Alaska petroleum systems.

Alaska↗

USGS2023

Connecting flood-related fluvial erosion and deposition with vulnerable downstream road-stream crossings

Fluvial erosion is increasingly responsible for infrastructure and building damages associated with floods as the intensity of extreme rainfalls hit rural and urban rivers in a variety of climate settings across the United States. Extreme floods in 2016 and 2018 caused widespread culvert blockages and road failures, including extensive damage along steep tributaries and ravines in the Marengo River, Wisconsin, watershed during 2016 and 2018. A study conducted by the U.S. Geological Survey (USGS), Wisconsin Wetlands Association (WWA), Ashland County, and the Northwest Wisconsin Regional Planning Commission (NWRPC) investigated the special concern of fluvial erosion hazards (FEHs) associated with gullying, streamside landslides, and the loss of wetland storage in headwaters. In 2019, a pilot study was begun to map and classify ephemeral and perennial streams and wetlands in terms of their sensitivity to FEHs. This study combined data from field-based rapid geomorphic assessments (RGAs) coupled with a stream network-wide geographic information system (GIS) approach for mapping stream segments, referred to as fluvial process zones (FPZ), sensitive to erosion, deposition, and channel change. The GIS approach used nationally available 10-meter (m) resolution topology and an extended stream network to map FPZs based on Strahler stream order, stream power, channel slope, presence of adjacent steep valley sides and headwater flats, and adjacent landform setting. Bankfull channel widths derived from RGA-based hydraulic geometry curves combined with drainage areas, an estimate of bankfull flow, and channel slope were used to calculate specific stream power for the FPZs. Lastly, the FPZs were characterized by their location within three major landform settings that affect erosion potential. The resulting vulnerability maps provided a screening framework to identify FPZs that are sensitive to incision, gullying and mass wasting along steep headwater ephemeral channels, as well as downstream perennial channels that have the potential for valley-side landslides, coarse sediment deposition, and channel change. Lastly, each FPZ was characterized in terms of hydrologic alteration associated with ditching. The vulnerability mapping products and rankings of sensitivity of FPZs will ultimately be used by Ashland County and their collaborators to prioritize natural flood management projects that mitigate FEHs, restore hydrology, and reconnect channels with adjacent wetlands and floodplains.

Wisconsin↗

USGS2026

Characterizing changes in postfire debris-flow hazard as burned areas recover

Emergency assessments of postfire debris-flow hazards that are performed by the U.S. Geological Survey (USGS) provide estimates of debris-flow likelihood and rainfall triggering conditions that are used for evaluating and managing runoff-generated debris-flow hazards in recently burned areas throughout the western United States. Although the immediate postfire period, within roughly one year after fire, is typically the most susceptible to runoff-generated debris flows, the hazard evolves in time and space as the burned area recovers. The recovery trajectory a given burned area will take depends on local climate and weather and can be difficult to predict. Some burned areas recover quickly, whereas others experience debris flows for multiple years after fire. As a result, extending our ability to update debris-flow likelihood estimates and rainfall thresholds based on observed recovery of the burned area would be beneficial. We present a method for multi-year runoff-generated debris-flow hazard assessment that leverages the USGS “M1” debris-flow likelihood model and integrates updated, satellite-derived, normalized burn ratio data to estimate vegetation recovery. We predict recovery-aware rainfall thresholds and validate them against a multi-year debris-flow hazard prediction and could be adapted for use with other debris-flow models that incorporate burn severity data.

Arizona, California, Colorado, New Mexico, Washing↗

USGS2024

Testing megathrust rupture models using tsunami deposits

The 26 January 1700 CE Cascadia subduction zone earthquake ruptured much of the plate boundary and generated a tsunami that deposited sand in coastal marshes from northern California to Vancouver Island. Although the depositional record of tsunami inundation is extensive in some of these marshes, few sites have been investigated in enough detail to map the inland extent of sand deposition and depict variability in tsunami deposit thickness and grain size. We collected 129 cores in marshes of the Salmon River estuary in Oregon and reanalyzed 114 core logs from a 1987–88 study that mapped the inland extent of circa 1700 CE sandy tsunami deposits. The ca. 1700 CE tsunami deposit in the Salmon River estuary is easily recognized in cores ≤1 m deep in which a buried marsh peat is overlain by a well sorted sand bed with a sharp lower contact that thins and fines inland. We use tsunami deposit data and models of sandy tsunami sediment transport (using Delft3D-FLOW) to test 15 rupture models that could represent a ca. 1700 CE earthquake. At least 12–16 m of slip offshore of the Salmon River, which results in 0.8–1.0 m of coastal coseismic subsidence, is required to match the ca. 1700 CE sand deposit's inland extent, which is consistent with models of heterogeneous megathrust slip in ca. 1700 CE. Our methods of detailed tsunami deposit mapping, combined with sediment transport modeling, can be used to test models of megathrust ruptures and their tsunamis to potentially improve earthquake and tsunami hazard assessments.

JGR Earth Surface↗

USGS2025

A regional model comparison between MODPATH and MT3D of groundwater travel time distributions

Groundwater quality changes in wells and streams lag behind changes to land use due to groundwater travel times. Two contaminant transport methods were compared to assess differences in their simulated travel time distributions (TTDs) to streams and wells in the Wisconsin Central Sands. MODPATH simulates advective groundwater flow with particle tracking, while MT3D simulates age-mass using a finite difference solution without dispersion to allow for direct comparison of the two methods. MODPATH appropriately simulates groundwater TTDs from the water table to surface discharge but is subject to inaccuracies at weak-sink well cells due to the flow-model grid discretization and imprecise location of well discharge within well cells. MT3D better represents weak-sink well cells since it removes mass in proportion to the prescribed pumping rate, although travel time within well cells is neglected. Conversely, MT3D's treatment of surface water boundary cells is not as accurate as MODPATH because mass should be removed from the water table rather than the full cell volume. MT3D simulations of TTDs can also be confounded by the instantaneous vertical distribution of mass introduced throughout recharge cells instead of at the water table, which initiates mass along deeper flow paths. We evaluated 9 MODPATH and 13 MT3D implementations, generating differences in median travel times of up to 18 years. Both methods have strengths and weaknesses, with MT3D better representing weak-sink well cell behavior and MODPATH better representing surficial recharge and discharge. The effect of these characteristics on simulated TTDs, along with ideas for ameliorating method weaknesses, is discussed.

Wisconsin↗

USGS2021

Factors influencing distribution of Coccidioides immitis in soil, Washington State, 2016

Coccidioides immitis and Coccidioides posadasii are causative agents of Valley fever, a serious fungal disease endemic to regions with hot, arid climate in the United States, Mexico, and Central and South America. The environmental niche of Coccidioide s spp. is not well defined, and it remains unknown whether these fungi are primarily associated with rodents or grow as saprotrophs in soil. To better understand the environmental reservoir of these pathogens, we used a systematic soil sampling approach, quantitative PCR (qPCR), culture, whole-genome sequencing, and soil chemical analysis to identify factors associated with the presence of C. immitis at a known colonization site in Washington State linked to a human case in 2010. We found that the same strain colonized an area of over 46,000 m 2 and persisted in soil for over 6 years. No association with rodent burrows was observed, as C. immitis DNA was as likely to be detected inside rodent holes as it was in the surrounding soil. In addition, the presence of C. immitis DNA in soil was correlated with elevated levels of boron, calcium, magnesium, sodium, and silicon in soil leachates. We also observed differences in the microbial communities between C. immitis -positive and -negative soils. Our artificial soil inoculation experiments demonstrated that C. immitis can use soil as a sole source of nutrients. Taken together, these results suggest that soil parameters need to be considered when modeling the distribution of this fungus in the environment.

Washington↗

USGS2024

Slope Unit Maker (SUMak): An efficient and parameter-free algorithm for delineating slope units to improve landslide modeling

Slope units are terrain partitions bounded by drainage and divide lines. In landslide modeling, including susceptibility modeling and event-specific modeling of landslide occurrence, slope units provide several advantages over gridded units, such as better capturing terrain geometry, improved incorporation of geospatial landslide-occurrence data in different formats (e.g., point and polygon), and better accommodating the varying data accuracy and precision in landslide inventories. However, the use of slope units in regional ( > 100 km 2 ) landslide studies remains limited due, in part, to the large computational costs and/or poor reproducibility with current delineation methods. We introduce a computationally efficient algorithm for the parameter-free delineation of slope units that leverages tools from within TauDEM and GRASS, using an R interface. The algorithm uses geomorphic laws to define the appropriate scaling of the slope units representative of hillslope processes, avoiding the often ambiguous determination of slope unit size. We then demonstrate how slope units enable more robust regional-scale landslide susceptibility and event-specific landslide occurrence maps.

Natural Hazards and Earth Systems Sciences (NHESS)↗

USGS2026

Family life is critical for migration and survival in a long-lived social bird

Extended parental care is common among birds and particularly well known among long-lived migratory species. Yet, factors influencing the duration of parental care are poorly understood, and empirical evidence for the functional importance of family life for offspring development is scarce. Using unique tracking and genetic data of 55 adult and juvenile migratory Bewick’s swans, among which 18 parent-offspring pairs and 13 sibling pairs, we quantify variation in family bond duration and identify the cause and consequences of their dissolution. Families generally broke up during the second half of the first northward migration of the offspring, when offspring were nearly one year old. Earlier separation occurred on the wintering grounds in response to disturbance ( n = 10 juveniles) and led to delayed migration and, critically, lower survival (40 vs. 86%). Our results provide rare empirical evidence that family bonds, as a pathway for social learning, are not just important, but vital to the migration and survival of young family-living birds.

Behavioral Ecology and Sociobiology↗

USGS2025

Metal-rich lacustrine sediments from legacy mining perpetuate copper exposure to aquatic-riparian food webs

Historic copper mining left a legacy of metal-rich tailings resulting in ecological impacts along and within Torch Lake, an area of concern in the Keweenaw Peninsula, Michigan, USA. Given the toxicity of copper to invertebrates, this study assessed the influence of this legacy on present day nearshore aquatic and terrestrial ecosystems. We measured the metal (Co, Cu, Ni, Zn, Cd) and metalloid (As) concentrations in sediment, pore water, surface water, larval and adult insects, and two riparian spider taxa collected from Torch Lake and a nearby reference lake. Overall, elevated metal and metalloid concentrations, particularly Cu, were measured in all sediment samples and some surface and pore water samples collected from Torch Lake. For instance, Cu concentrations in the Torch Lake sediment were ∼200% higher than the reference lake and all measured concentrations exceeded predicted effects concentrations by at least ninefold. Within larval insect tissues, we observed 160% higher Cu concentrations than measured in the reference lake, and Cu was the only measured element above predicted effects concentrations in Torch Lake. Adult insects collected at both lakes had similar metal concentrations irrespective of exposure levels. Yet we found 100% higher copper concentrations in Torch Lake riparian spiders, demonstrating elevated exposure risk to insectivores across the aquatic-terrestrial boundary. Our results highlight that other metals in the mixture may not be as concerning to adjacent riparian ecosystems, but copper remains a contaminant of concern in Torch Lake 60 years after mining ceased.

Michigan↗

USGS2024

A multidisciplinary approach that considers occurrence, geochemistry, bioavailability, and toxicity to prioritize critical minerals for environmental research

Critical minerals (or critical elements) are minerals or elements that are essential to global security and development and have supply chains vulnerable to disruption. In general, knowledge of the environmental behavior and health effects of critical elements is needed to support the development of safe and environmentally responsible supplies. This knowledge includes identifying potential consequences of increased critical element production and use, alternative critical element sources such as mine wastes, and adverse effects of critical elements on ecosystem condition and organismal health. Here we identify significant data gaps in the understanding of critical elements in surficial and aquatic environments, and the need, given the large number of commodities (50) identified on the 2022 critical minerals list for the United States, for an approach to prioritize them for study of their environmental fate and effects. We propose a multidisciplinary approach for this prioritization, considering measures of occurrence, geochemistry, bioavailability, and toxicity. We describe relatively easy-to-obtain metrics for each of these topic areas and demonstrate the utility of this integrated prioritization approach using indium and zinc as examples. This approach facilitates prioritizing research with a focus on those critical elements that are most mobile in the environment, bioavailable, toxic, or simply lacking data in these categories.

Environmental Science & Technology↗

USGS2025

Reaction kinetics and accelerant effects of sulfides in early mature hydrocarbon generation using hydrous pyrolysis

Hydrocarbon generation in organic-rich sediments is influenced by the molecular organic composition and relative abundance of associated minerals. Certain mineral-derived elements act as catalysts and reaction intermediaries, facilitating early-stage hydrocarbon formation in potential source rocks. This study investigated the role of sulfur contributed from pyrite as an accelerant in thermal reaction, focusing on its effects on early maturation and consequent hydrocarbon generation from gilsonite (low-sulfur solid petroleum). Hydrous pyrolysis (HP) experiments were conducted on mixtures of gilsonite and pyrite in varying ratios (1:0.1, 1:0.5, 1:1, 1:2, and 1:10 w/w gilsonite:pyrite) at 320, 350, and 370 °C for 72 h. Untreated and thermally altered residues were analyzed using solid bitumen reflectance (BR o , %), total organic carbon (TOC) content, programmed temperature pyrolysis, scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and X-ray diffraction (XRD) to evaluate the potential accelerant role of pyritic sulfur in hydrocarbon formation. The results show HP residues at 320 and 350 °C with greater pyrite concentrations had higher BR o , while reflectance values were similar in the 370 °C residues, regardless of pyrite concentration, suggesting enhanced reaction at lower thermal conditions. Increasing pyrite content systematically decreased hydrogen index (HI) values while increasing the transformation ratio (TR) and production index (PI), indicating enhanced conversion of organic matter to hydrocarbons with increasing pyrite concentrations. Gas yields increased with pyrite addition, particularly at 350 °C, confirming secondary cracking effects. However, gas production stabilized or declined at higher pyrite loadings (1:10), suggesting alternative reaction pathways such as coke formation. Our data indicate the presence of pyrite lowers the activation energy for thermal cracking, shifting peak experimental hydrocarbon generation temperatures downward by 20–30 °C, with the most pronounced accelerant effects observed at moderate pyrite concentrations (1:0.5 and 1:1). The thermodynamic framework reveals that pyrite stability is influenced by experimental conditions, with pyrrhotite formation favored in the presence of gilsonite due to reduced oxygen fugacity. Pyrite transformation to pyrrhotite, as observed through XRD, SEM-EDS, and predicted by thermodynamic data, further supports the accelerant role of S, as pyrrhotite exhibits a higher hydrogen transfer potential, promoting early oil generation. These findings highlight the importance of pyrite in modulating hydrocarbon generation pathways in organic-rich systems.

Journal of Analytical and Applied Pyrolysis↗