USGS Science⌕ Search

SEARCH · USGS Science

Results for “Stratigraphy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77Linked to original sources
USGS1987

BOREHOLE NEUTRON ACTIVATION: THE RARE EARTHS.

Neutron-induced borehole gamma-ray spectroscopy has been widely used as a geophysical exploration technique by the petroleum industry, but its use for mineral exploration is not as common. Nuclear methods can be applied to mineral exploration, for determining stratigraphy and bed correlations, for mapping ore deposits, and for studying mineral concentration gradients. High-resolution detectors are essential for mineral exploration, and by using them an analysis of the major element concentrations in a borehole can usually be made. A number of economically important elements can be detected at typical ore-grade concentrations using this method. Because of the application of the rare-earth elements to high-temperature superconductors, these elements are examined in detail as an example of how nuclear techniques can be applied to mineral exploration.

IEEE Transactions on Nuclear Science↗
USGS2009

Strategic analysis for the MER Cape Verde approach

The Mars Exploration Rover Opportunity has recently completed a two year campaign studying Victoria Crater. The campaign culminated in a close approach of Cape Verde in order to acquire high resolution imagery of the exposed stratigraphy in the cliff face. The close approach to Cape Verde provided significant challenges for every subsystem of the rover as the rover needed to traverse difficult, uncharacterised terrain and approach a cliff face with the potential of blocking out solar energy and communications with Earth. In this paper we describe the strategic analyses performed by the science and engineering teams so that we could successfully achieve the science objectives while keeping the rover safe. ??2009 IEEE.

Conference Paper↗
USGS1986

Shuttle imaging radar: Physical controls on signal penetration and subsurface scattenng in the Eastern Sahara

SIR-A signal penetration and subsurface backscatter within the upper meter or so of the sediment blanket in the Eastern Sahara of southern Egypt and northern Sudan are enhanced both by radar sensor parameters and by the physical and chemical characteristics of eolian and alluvial materials. Interpretation of SIR-A images by McCauley et al. [1], [2] dramatically changed previous concepts of the role that fluvial processes have played over the past 10000 to 30000000 years in shaping this now extremely flat, featureless, and hyperarid landscape. In the present paper we summarize the near-surface stratigraphy, the electrical properties of materials, and the types of radar interfaces found to be responsible for different classes of SIR-A tonal response. The dominant factors related to efficient microwave signal penetration into the sediment blanket include a) favorable distribution of particle sizes, b) extremely low moisture content and c) reduced geometric scattering at the SIR-A frequency (1.3 GHz). The depth of signal penetration that results in a recorded backscatter, here called "radar imaging depth," was documented in the field to be a maximum of 1.5 m, or 0.25 of the calculated "skin depth," for the sediment blanket. Radar imaging depth is estimated to be between 2 and 3 m for active sand dune materials. Diverse permittivity interfaces and volume scatterers within the shallow subsurface are responsible for most of the observed backscatter not directly attributable to grazing outcrops.

IEEE Transactions on Geoscience and Remote Sensing↗
USGS2022

Snow depth retrieval with an autonomous UAV-mounted software-defined radar

We present results from a field campaign to measure seasonal snow depth at Cameron Pass, Colorado, using a synthetic ultrawideband software-defined radar (SDRadar) implemented in commercially available Universal Software Radio Peripheral (USRP) software-defined radio hardware and flown on a small hexacopter unmanned aerial vehicle (UAV). We coherently synthesize an ultrawideband signal from stepped frequency 50-MHz subpulses across 600-2100-MHz frequency bands using a novel nonuniform nonlinear synthetic wideband waveform reconstruction technique that minimizes sweep time and completely eliminates problematic grating lobes and other processing artifacts traditionally seen in stepped waveform synthesis. We image seasonal snow across two transects: a 400-m open Meadow Transect and a 380-m forested transect. We present a surface detection algorithm that fuses data from LiDAR, global navigation satellite system (GNSS)/global positioning system (GPS), and features in the radargram itself to obtain high precision estimates of both snow and ground surface reflections, and thus total snow depth, represented as two-way travel time. The measurements are validated against independent ground-based ground-penetrating radar measurements with correlations coefficients as high as ρ = 0.9 demonstrated. Finally, we compare backscattered radar data collected by the UAV-SDRadar while hovering proximal to a known snow pit with in situ measured snow dielectric profiles and demonstrate imaging of snow stratigraphy.

Colorado↗
USGS2016

Detrital zircon geochronology of pre- and syncollisional strata, Acadian orogen, Maine Appalachians

The Central Maine Basin is the largest expanse of deep-marine, Upper Ordovician to Devonian metasedimentary rocks in the New England Appalachians, and is a key to the tectonics of the Acadian Orogeny. Detrital zircon ages are reported from two groups of strata: (1) the Quimby, Rangeley, Perry Mountain and Smalls Falls Formations, which were derived from inboard, northwesterly sources and are supposedly older; and (2) the Madrid, Carrabassett and Littleton Formations, which were derived from outboard, easterly sources and are supposedly younger. Deep-water deposition prevailed throughout, with the provenance shift inferred to mark the onset of foredeep deposition and orogeny. The detrital zircon age distribution of a composite of the inboard-derived units shows maxima at 988 and 429 Ma; a composite from the outboard-derived units shows maxima at 1324, 1141, 957, 628, and 437 Ma. The inboard-derived units have a greater proportion of zircons between 450 and 400 Ma. Three samples from the inboard-derived group have youngest age maxima that are significantly younger than the nominal depositional ages. The outboard-derived group does not share this problem. These results are consistent with the hypothesised provenance shift, but they signal potential problems with the established stratigraphy, structure, and (or) regional mapping. Shallow-marine deposits of the Silurian to Devonian Ripogenus Formation, from northwest of the Central Maine Basin, yielded detrital zircons featuring a single age maximum at 441 Ma. These zircons were likely derived from a nearby magmatic arc now concealed by younger strata. Detrital zircons from the Tarratine Formation, part of the Acadian foreland-basin succession in this strike belt, shows age maxima at 1615, 980 and 429 Ma. These results are consistent with three episodes of zircon recycling beginning with the deposition of inboard-derived strata of the Central Maine Basin, which were shed from post-Taconic highlands located to the northwest. Next, southeasterly parts of this succession were deformed in the Acadian orogeny, shedding detritus towards the northwest into what remained of the basin. Finally, by Pragian time, all strata in the Central Maine Basin had been deformed and detritus from this new source accumulated as the Tarratine Formation in a new incarnation of the foreland basin. Silurian-Devonian strata from the Central Maine Basin have similar detrital zircon age distributions to coeval rocks from the Arctic Alaska and Farewell terranes of Alaska and the Northwestern terrane of Svalbard. We suggest that these strata were derived from different segments of the 6500-km-long Appalachian-Caledonide orogen.

Maine, New Hampshire↗
USGS2008

Early Miocene sequence development across the New Jersey margin

Sequence stratigraphy provides an understanding of the interplay between eustasy, sediment supply and accommodation in the sedimentary construction of passive margins. We used this approach to follow the early to middle Miocene growth of the New Jersey margin and analyse the connection between relative changes of sea level and variable sediment supply. Eleven candidate sequence boundaries were traced in high-resolution multi-channel seismic profiles across the inner margin and matched to geophysical log signatures and lithologic changes in ODP Leg 150X onshore coreholes. Chronologies at these drill sites were then used to assign ages to the intervening seismic sequences. We conclude that the regional and global correlation of early Miocene sequences suggests a dominant role of global sea-level change but margin progradation was controlled by localized sediment contribution and that local conditions played a large role in sequence formation and preservation. Lowstand deposits were regionally restricted and their locations point to both single and multiple sediment sources. The distribution of highstand deposits, by contrast, documents redistribution by along shelf currents. We find no evidence that sea level fell below the elevation of the clinoform rollover, and the existence of extensive lowstand deposits seaward of this inflection point indicates efficient cross-shelf sediment transport mechanisms despite the apparent lack of well-developed fluvial drainage. ?? 2008 The Authors. Journal compilation ?? 2008 Blackwell Publishing.

Basin Research↗
USGS2008

100 Myr record of sequences, sedimentary facies and sea level change from Ocean Drilling Program onshore coreholes, US Mid-Atlantic coastal plain

We analyzed the latest Early Cretaceous to Miocene sections (???110-7Ma) in 11 New Jersey and Delaware onshore coreholes (Ocean Drilling Program Legs 150X and 174AX). Fifteen to seventeen Late Cretaceous and 39-40 Cenozoic sequence boundaries were identified on the basis of physical and temporal breaks. Within-sequence changes follow predictable patterns with thin transgressive and thick regressive highstand systems tracts. The few lowstands encountered provide critical constraints on the range of sea-level fall. We estimated paleowater depths by integrating lithofacies and biofacies analyses and determined ages using integrated biostratigraphy and strontium isotopic stratigraphy. These datasets were backstripped to provide a sea-level estimate for the past ???100 Myr. Large river systems affected New Jersey during the Cretaceous and latest Oligocene-Miocene. Facies evolved through eight depositional phases controlled by changes in accommodation, long-term sea level, and sediment supply: (1) the Barremian-earliest Cenomanian consisted of anastomosing riverine environments associated with warm climates, high sediment supply, and high accommodation; (2) the Cenomanian-early Turonian was dominated by marine sediments with minor deltaic influence associated with long-term (107 year) sea-level rise; (3) the late Turonian through Coniacian was dominated by alluvial and delta plain systems associated with long-term sea-level fall; (4) the Santonian-Campanian consisted of marine deposition under the influence of a wave-dominated delta associated with a long-term sea-level rise and increased sediment supply; (5) Maastrichtian-Eocene deposition consisted primarily of starved siliciclastic, carbonate ramp shelf environments associated with very high long-term sea level and low sediment supply; (6) the late Eocene-Oligocene was a starved siliciclastic shelf associated with moderately high sea-level and low sediment supply; (7) late early-middle Miocene consisted of a prograding shelf under a strong wave-dominated deltaic influence associated with major increase in sediment supply and accommodation due to local sediment loading; and (8) over the past 10 Myr, low accommodation and eroded coastal systems were associated with low long-term sea level and low rates of sediment supply due to bypassing. ?? 2008 The Authors. Journal compilation ?? 2008 Blackwell Publishing.

Basin Research↗
USGS1991

Defining the Devonian: 1979-89

Describes the work of the Subcommission on Devonian Stratigraphy which has attempted to achieve consensus on each of the Devonian boundaries, based mainly on biostratigraphic information. The base of the Devonian system and each of the Devonian stages are defined. -S.J.Stone

Lethaia↗
USGS2005

Hydrochemistry of the Mahomet Bedrock Valley Aquifer, East-Central Illinois: Indicators of recharge and ground-water flow

A conceptual model of the ground-water flow and recharge to the Mahomet Bedrock Valley Aquifer (MVA), east-central Illinois, was developed using major ion chemistry and isotope geochemistry. The MVA is a “basal” fill in the east-west trending buried bedrock valley composed of clean, permeable sand and gravel to thicknesses of up to 61 m. It is covered by a thick sequence of glacial till containing thinner bodies of interbedded sand and gravel. Ground water from the MVA was found to be characterized by clearly defined geochemical regions with three distinct ground-water types. A fourth ground-water type was found at the confluence of the MVA and the Mackinaw Bedrock Valley Aquifer (MAK) to the west. Ground water in the Onarga Valley, a northeastern tributary of the MVA, is of two types, a mixed cation-SO 4 2- type and a mixed cation-HCO 3 type. The ground water is enriched in Na + Ca 2+ , Mg 2+ , and SO 4 2- which appears to be the result of an upward hydraulic gradient and interaction of deeper ground water with oxidized pyritic coals and shale. We suggest that recharge to the Onarga Valley and overlying aquifers is 100% from bedrock (leakage) and lateral flow from the MVA to the south. The central MVA (south of the Onarga Valley) is composed of relatively dilute ground water of a mixed cation-HC0 3 type, with low total dissolved solids, and very low concentrations of Cl - and SO 4 2- . Stratigraphie relationships of overlying aquifers and ground-water chemistry of these and the MVA suggest recharge to this region of the MVA (predominantly in Champaign County) is relatively rapid and primarily from the surface. Midway along the westerly flow path of the MVA (western MVA), ground water is a mixed cation-HCO 3 - type with relatively high Cl - , where Cl - increases abruptly by one to two orders of magnitude. Data suggest that the increase in Cl - is the result of leakage of saline ground water from bedrock into the MVA. Mass-balance calculations indicate that approximately 9.5% of recharge in this area is from bedrock. Concentrations of Na + , HCO 3 - , As, and TDS also increase in the western MVA. Ground water in the MAK is of a Ca 2+ -HCO 3 2- type. Mass-balance calculations, using Cl - as a natural, conservative tracer, indicate that approximately 17% of the ground water flowing from the confluence area is derived from the MVA.

Groundwater↗
USGS2005

Importance of the Vadose Zone in analyses of unconfined aquifer tests

Analytical models commonly used to interpret unconfined aquifer tests have been based on upper-boundary (water table) conditions that do not adequately address effects of time-varying drainage from the vadose zone. As a result, measured and simulated drawdown data may not agree and hydraulic parameters may be inaccurately estimated. A 72-hour aquifer test conducted in Cape Cod, Massachusetts, in a slightly heterogeneous, coarse-grained, glacial outwash deposit was found to be a good candidate for testing models with different upper-boundary conditions. In general, under the commonly invoked assumption of instantaneous drainage, measured and simulated draw-downs were found to agree with one another only at late time and early time. In the intermediate-time range, because of delayed drainage, measured drawdowns always exceeded simulated values, most noticeably in piezometers located near the water table. To reduce these discrepancies, an analytical model was developed that can fully account for time-varying drainage given that the aquifer is not strongly heterogeneous. The approach is flexible as the model, which makes use of empirical relations, does not constrain drainage to follow any particular functional relation. By this approach, measured and simulated drawdowns agree over the complete time range, and the estimated parameters are consistent with prior studies and with what is known about the aquifer geometry, stratigraphy, and composition. By properly accounting for vadose zone drainage, it was found that realistic estimates of all hydraulic parameters, including specific yield, could be obtained with or without the use of late-time data.

Ground Water↗
USGS2007

Fracture control of ground water flow and water chemistry in a rock aquitard

There are few studies on the hydrogeology of sedimentary rock aquitards although they are important controls in regional ground water flow systems. We formulate and test a three-dimensional (3D) conceptual model of ground water flow and hydrochemistry in a fractured sedimentary rock aquitard to show that flow dynamics within the aquitard are more complex than previously believed. Similar conceptual models, based on regional observations and recently emerging principles of mechanical stratigraphy in heterogeneous sedimentary rocks, have previously been applied only to aquifers, but we show that they are potentially applicable to aquitards. The major elements of this conceptual model, which is based on detailed information from two sites in the Maquoketa Formation in southeastern Wisconsin, include orders of magnitude contrast between hydraulic diffusivity (K/Ss) of fractured zones and relatively intact aquitard rock matrix, laterally extensive bedding-plane fracture zones extending over distances of over 10 km, very low vertical hydraulic conductivity of thick shale-rich intervals of the aquitard, and a vertical hydraulic head profile controlled by a lateral boundary at the aquitard subcrop, where numerous surface water bodies dominate the shallow aquifer system. Results from a 3D numerical flow model based on this conceptual model are consistent with field observations, which did not fit the typical conceptual model of strictly vertical flow through an aquitard. The 3D flow through an aquitard has implications for predicting ground water flow and for planning and protecting water supplies. ?? 2007 National Ground Water Association.

Ground Water↗
USGS2010

Arsenic Geochemistry and Hydrostratigraphy in Midwestern U.S. Glacial Deposits

Arsenic concentrations exceeding the U.S. EPA's 10 ??g/L standard are common in glacial aquifers in the midwestern United States. Previous studies have indicated that arsenic occurs naturally in these aquifers in association with metal-(hydr)oxides and is released to groundwater under reducing conditions generated by microbial oxidation of organic matter. Despite this delineation of the arsenic source and mechanism of arsenic mobilization, identification of arsenic-impacted aquifers is hindered by the heterogeneous and discontinuous nature of glacial sediments. In much of the Midwest, the hydrostratigraphy of glacial deposits is not sufficiently characterized to predict where elevated arsenic concentrations are likely to occur. This case study from southeast Wisconsin presents a detailed characterization of local stratigraphy, hydrostratigraphy, and geochemistry of the Pleistocene glacial deposits and underlying Silurian dolomite. Analyses of a single core, water chemistry data, and well construction reports enabled identification of two aquifers separated by an organic-rich aquitard. The upper, unconfined aquifer provides potable water, whereas arsenic generally exceeds 10 ??g/L in the deeper aquifer. Although coring and detailed hydrostratigraphic characterization are often considered impractical, our results demonstrate that a single core improved interpretation of the complex lithology and hydrostratigraphy. This detailed characterization of hydrostratigraphy facilitated development of well construction guidelines and lays the ground work for further studies of the complex interactions among aquifer sediments, hydrogeology, water chemistry, and microbiology that lead to elevated arsenic in groundwater. Copyright ?? 2009 The Author(s). Journal compilation ?? 2009 National Ground Water Association.

Ground Water↗
USGS2010

Multiple well-shutdown tests and site-scale flow simulation in fractured rocks

A new method was developed for conducting aquifer tests in fractured-rock flow systems that have a pump-and-treat (P&T) operation for containing and removing groundwater contaminants. The method involves temporary shutdown of individual pumps in wells of the P&T system. Conducting aquifer tests in this manner has several advantages, including (1) no additional contaminated water is withdrawn, and (2) hydraulic containment of contaminants remains largely intact because pumping continues at most wells. The well-shutdown test method was applied at the former Naval Air Warfare Center (NAWC), West Trenton, New Jersey, where a P&T operation is designed to contain and remove trichloroethene and its daughter products in the dipping fractured sedimentary rocks underlying the site. The detailed site-scale subsurface geologic stratigraphy, a three-dimensional MODFLOW model, and inverse methods in UCODE_2005 were used to analyze the shutdown tests. In the model, a deterministic method was used for representing the highly heterogeneous hydraulic conductivity distribution and simulations were conducted using an equivalent porous media method. This approach was very successful for simulating the shutdown tests, contrary to a common perception that flow in fractured rocks must be simulated using a stochastic or discrete fracture representation of heterogeneity. Use of inverse methods to simultaneously calibrate the model to the multiple shutdown tests was integral to the effectiveness of the approach.

Groundwater↗
USGS2010

Hydrogeologic framework of fractured sedimentary rock, Newark Basin, New Jersey

The hydrogeologic framework of fractured sedimentary bedrock at the former Naval Air Warfare Center (NAWC), Trenton, New Jersey, a trichloroethylene (TCE)-contaminated site in the Newark Basin, is developed using an understanding of the geologic history of the strata, gamma-ray logs, and rock cores. NAWC is the newest field research site established as part of the U.S. Geological Survey Toxic Substances Hydrology Program, Department of Defense (DoD) Strategic Environmental Research and Development Program, and DoD Environmental Security Technology Certification Program to investigate contaminant remediation in fractured rock. Sedimentary bedrock at the NAWC research site comprises the Skunk Hollow, Byram, and Ewing Creek Members of the Lockatong Formation and Raven Rock Member of the Stockton Formation. Muds of the Lockatong Formation that were deposited in Van Houten cycles during the Triassic have lithified to form the bedrock that is typical of much of the Newark Basin. Four lithotypes formed from the sediments include black, carbon-rich laminated mudstone, dark-gray laminated mudstone, light-gray massive mudstone, and red massive mudstone. Diagenesis, tectonic compression, off-loading, and weathering have altered the rocks to give some strata greater hydraulic conductivity than other strata. Each stratum in the Lockatong Formation is 0.3 to 8 m thick, strikes N65 degrees E, and dips 25 degrees to 70 degrees NW. The black, carbon-rich laminated mudstone tends to fracture easily, has a relatively high hydraulic conductivity and is associated with high natural gamma-ray count rates. The dark-gray laminated mudstone is less fractured and has a lower hydraulic conductivity than the black carbon-rich laminated mudstone. The light-gray and the red massive mudstones are highly indurated and tend to have the least fractures and a low hydraulic conductivity. The differences in gamma-ray count rates for different mudstones allow gamma-ray logs to be used to correlate and delineate the lithostratigraphy from multiple wells. Gamma-ray logs and rock cores were correlated to develop a 13-layer gamma-ray stratigraphy and 41-layer lithostratigraphy throughout the fractured sedimentary rock research site. Detailed hydrogeologic framework shows that black carbon-rich laminated mudstones are the most hydraulically conductive. Water-quality and aquifer-test data indicate that groundwater flow is greatest and TCE contamination is highest in the black, carbon- and clay-rich laminated mudstones. Large-scale groundwater flow at the NAWC research site can be modeled as highly anisotropic with the highest component of permeability occurring along bedding planes.

New Jersey↗
USGS2017

Sedimentological and petrographic analysis of drill core FC77-1 from the flank of the central uplift, Flynn Creek impact structure, Tennessee

Drill core FC 77‐1 on the flank of the central uplift, Flynn Creek impact structure, Tennessee, contains 175 m of impact breccia lying upon uplifted Lower Paleozoic carbonate target stratigraphy. Sedimentological analysis of this 175‐m interval carbonate breccia shows that there are three distinct sedimentological units. In stratigraphic order, unit 1 (175–109 m) is an overall coarsening‐upward section, whereas the overlying unit 2 (109–32 m) is overall fining‐upward. Unit 3 (32–0 m) is a coarsening‐upward sequence that is truncated at the top by postimpact erosion. Units 1 and 3 are interpreted as debris or rock avalanches into finer sedimentary deposits within intracrater marine waters, thus producing progressively coarser, coarsening‐upward sequences. Unit 2 is interpreted to have formed by debris or rock avalanches into standing marine waters, thus forming sequential fining‐upward deposits. Line‐logging of clasts ranging from 5 mm to 1.6 m, and thin‐section analysis of selected drill core samples (including clasts < 5 mm), both show that the Flynn Creek impact breccia consists almost entirely of dolostone clasts (90%), with minor components of cryptocrystalline melt clasts, chert and shale fragments, and clastic grains. Cryptocrystalline melt clasts, which appear isotropic in thin section, are in fact made of exceedingly fine quartz crystals that exhibit micro‐Fourier transform infrared (FTIR ) and micro‐Raman spectra consistent with crystalline quartz. These cryptocrystalline melt clasts are the first melt clasts of any kind to be reported from Flynn Creek impact structure.

Tennessee↗
USGS2020

Relative influence of antecedent topography and sea-level rise on barrier-island migration

The response of barrier islands to sea-level rise is modulated by combinations of coastal processes, eco-geomorphic feedbacks, and structural controls, such as antecedent topography. Interactions among these drivers can lead to complex and non-linear changes in island morphology and transitions between migrational, erosional, or progradational states. This study seeks to constrain the morphologic consequences of barrier islands migrating across complex antecedent topography in response to rising sea level. The stratigraphy of four barrier-backbarrier systems along the U.S. Mid-Atlantic coast informs idealized geometries of diverse antecedent substrate. These outcomes are integrated into a cross-shore morphodynamic model of barrier-island migration to quantify the influence of this antecedent geology on barrier-retreat behavior. Additionally, this study explores the future response of specific barrier islands to various rates of sea-level rise over multi-decadal to millennial timescales. The results show antecedent substrate slope plays a central role in barrier morphodynamic behaviour. In particular, migration across a subaqueous backbarrier ridge (e.g., coastal barrier or dune deposits from earlier sea-level highstands) can cause a succession of phase changes in a modern island. For example, the case studies illustrate the steep slopes and decreased backbarrier accommodation associated with antecedent highs greater than 3 m in profile can greatly reduce island migration rates, effectively “pinning” the island in place, even with sea-level rise rates up to 6 mm yr-1. However, once the island migrates over the high, backbarrier accommodation increases, leading to enhanced overwash fluxes, more rapid landward migration, and possible drowning. Additionally, the results indicate that antecedent substrate may slow barrier-island migration by providing sediment through both shoreface and inlet processes. The field and modelling insights from this study are presented as a conceptual model of the relative influence of various antecedent features on barrier-island dynamics along sandy, siliciclastic coasts.

Maryland, New Jersey, Virginia↗
USGS2023

Spatial distribution and variability of lobe facies in a large sand-rich submarine fan system: Neoproterozoic Zerrissene Group, Namibia

The deposits of the upper Neoproterozoic Zerrissene Group of central-western Namibia represent a large siliciclastic deep-water depositional system that showcases the intricacies of facies and architectural relationships from bed-scale to fan-system-scale. The lack of vegetation in the Namib Desert and regular east–west repetition of folded stratigraphy (reflecting ca 50% tectonic shortening) provides quasi-three-dimensional exposure over a current area of approximately 2700 square kilometres. The Brak River Formation, the middle sand-rich unit of the Zerrissene Group, consists of nearly 600 m of strata exposed in multiple parallel continuous outcrops up to ca 10 km in length and oriented obliquely to depositional dip. Ten stratigraphic sections are correlated ca 32 km ( ca 64 km restored) across the basin and offer exposure comparable in scale to modern submarine fans. Six sedimentary facies are identified and grouped into four facies associations that represent axial-to-marginal portions of deep-water lobes in an unconfined submarine fan system. Spatial facies patterns, regional thickness variations, and palaeocurrents indicate that Brak River Formation sediments were transported primarily from the north to south–south-west through a trough-like basin, and deposited within an unconfined basin plain at the junction of the Adamastor and Khomas oceans. The unique outcrop exposure and extent permits the documentation of system-scale architecture and basin configuration of the Brak River submarine fan system. A transition from the sand-rich lower Brak River Formation to more intercalated mudstone-dominated intervals in the middle and upper Brak River Formation is interpreted to record a change from aggradational to compensational stacking of lobe deposits. This records the evolution of a large submarine fan as it filled the subtle seafloor topography and became less confined at the system-scale. The documentation of these deep-water deposits from centimetre-scale to basin-scale provides a new model for a system with extensive long-distance transport of sand-rich sediment gravity flows to submarine lobes without apparent channelization.

Sedimentology↗
USGS2026

Acoustic measurements and modeling of sub-bottom layers on the summit of the Atlantis II Seamount

Sub-bottom profiler images taken from the summit plateau of the Atlantis II Seamount reveal distinct seabed stratigraphy, including marine sediment, limestone, and basalt layers. Acoustic reflection data also show arrivals reflecting from this sub-bottom structure. A wavenumber integration model with elastic geoacoustic properties is able to reproduce the arrival pattern of seabed reflections and particularly the phase inversion of the sub-bottom return. The reflection model suggests that the limestone layer is eroded with high porosity and possesses a lower compressional velocity than a well-cemented layer. The model results also highlight the necessity of incorporating elastic effects for realistic geoacoustic characterization.

JASA Express Letters↗