USGS Science⌕ Search

SEARCH · USGS Science

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77Linked to original sources

Seismic Sources and Recurrence Rates as Adopted by USGS Staff for the Production of the 1982 and 1990 Probabilistic Ground Motion Maps for Alaska and the Conterminous United States

The construction of a probabilistic ground-motion hazard map for a region follows a sequence of analyses beginning with the selection of an earthquake catalog and ending with the mapping of calculated probabilistic ground-motion values (Hanson and others, 1992). An integral part of this process is the creation of sources used for the calculation of earthquake recurrence rates and ground motions. These sources consist of areas and lines that are representative of geologic or tectonic features and faults. After the design of the sources, it is necessary to arrange the coordinate points in a particular order compatible with the input format for the SEISRISK-III program (Bender and Perkins, 1987). Source zones are usually modeled as a point-rupture source. Where applicable, linear rupture sources are modeled with articulated lines, representing known faults, or a field of parallel lines, representing a generalized distribution of hypothetical faults. Based on the distribution of earthquakes throughout the individual source zones (or a collection of several sources), earthquake recurrence rates are computed for each of the sources, and a minimum and maximum magnitude is assigned. Over a period of time from 1978 to 1980 several conferences were held by the USGS to solicit information on regions of the United States for the purpose of creating source zones for computation of probabilistic ground motions (Thenhaus, 1983). As a result of these regional meetings and previous work in the Pacific Northwest, (Perkins and others, 1980), California continental shelf, (Thenhaus and others, 1980), and the Eastern outer continental shelf, (Perkins and others, 1979) a consensus set of source zones was agreed upon and subsequently used to produce a national ground motion hazard map for the United States (Algermissen and others, 1982). In this report and on the accompanying disk we provide a complete list of source areas and line sources as used for the 1982 and later 1990 seismic hazard maps for the conterminous U.S. and Alaska. These source zones are represented in the input form required for the hazard program SEISRISK-III, and they include the attenuation table and several other input parameter lines normally found at the beginning of an input data set for SEISRISK-III.

Open-File Report↗

Geology and mineral deposits of the Minnie Moore and Bullion mineralized areas, Blaine County, Idaho

In the early 1880?s the discovery of rich ores in the Minnie Moore and Bullion mineralized areas sparked a rush to settle and develop the Wood River valley. Silver and lead discoveries in these areas spurred the boom in mining after completion of the Oregon Short Line Railroad to Hailey in 1883. In both areas the ore comprises galena, sphalerite, and tetrahedrite in a gangue of siderite, calcite, or quartz. Minor goldbearing quartz veins are also present. The ore is in fissure and replacement veins along fracture systems that formed in Late Cretaceous time, after intrusion of nearby granodiorite or quartz diorite stocks. The ore formed under mesothermal conditions and heat was supplied by the nearby plutons. In the Minnie Moore area, the mineralized veins are cut by low-angle normal faults that are of probable Eocene age. In the Minnie Moore mineralized area, the host rock is the middle part of the Devonian Milligen Formation, (the informal Lucky Coin limestone and Triumph argillite), which is the same stratigraphic level as the host ore in the rich Triumph mine northeast of Hailey. In the Bullion mineralized area, the ore is hosted by the lower member of the Middle Pennsylvanian to Lower Permian Dollarhide Formation. Rich ore was mined in several tunnels that reached the Mayflower vein, a northwest-striking mineralized shear zone. The deposits are thought to be mainly mesothermal veins that formed in association with Cretaceous magmatism. The syngenetic stratiform model of ore formation has often been applied to these deposits, however, no evidence of syngenetic mineralization was found in this study. Faulting has displaced most of the major orebodies and thus has made mining these deposits a challenge.

Bulletin↗

Vertebrate fossil-bearing paleosol units (Willwood Formation, Lower Eocene, Northwest Wyoming, U.S.A.): Implications for taphonomy, biostratigraphy, and assemblage analysis

In the lower 300 m of the fluvial Willwood Formation of northwest Wyoming, most large concentrations of vertebrate fossils consist of disarticulated and broken skeletal remains that occur in widespread, tubular, thin (2 cm-1 m) greenish- and bluish-gray mudstones that are low in percentage of free iron, aluminum, and manganese, relatively high in percentages of organic carbon, and often show evidence of clay eluviation. These units lie atop sesquioxide-rich, sometimes clay-illuviated variegated unit (red, yellow, purple, and mottled variants) and are relicts of the A horizons of podzolic spodosols (aquods). The wide distribution of bone fragments, the numerical proportions of bone elements, weathering of the fragments, and biogenic evidence indicate the vertebrate remains accumulated gradually as litter on the surface of the soils and became incorporated into the A horizon. The bones were disarticulated, broken, and otherwise disturbed by the action of scavengers prior to burial. Occurrence of abundant vertebrate remains in discrete, readily identifiable, and widespread paleosol units makes these units valuable biostratigraphic markers (zonules, faunules). Evidence of geologically short-term lag accumulation of the bones is important to assemblage analysis; the paleosol concentrations result from attritional mortalities that more closely reflect composition of the life assemblage than do remains concentrated by fluvial transport or predators.

Wyoming↗

Minor epigenetic, diagenetic, and syngenetic sulfide, fluorite, and barite occurrences in the central United States

Metallic sulfides, fluorite , barite , and celestite are widespread in the sedimentary rocks of the central United States . Many occurrences are epigenetic concentrations either in known major mineral districts or in clusters of deposits that warrant further exploration for potential ore. Evaluation of trace-element composition, of fluid inclusions, of depositional temperature, and of isotopic composition of sulfur may help discriminate potentially economic deposits from even more widespread, probably noneconomic, syngeneic occurrences . Known major mineral districts and many promising sulfide occurrences are located along complex major fault systems and particularly over structural domes at intersections of fault systems. Economically promising sulfide deposits occur along a west-trending fault system crossing Kentucky and Missouri near the 38th parallel, particularly at associated cryptoexplosion structures along it, at the intersection of the fault system with the Cincinnati arch. Elsewhere in the central United States , promising sulfide occurrences are located along the crest of the Findlay arch, near Serpent Mound, Ohio, along the northwest-trending Mount Carmel fault in southwestern Indiana, and buried at depth in oil fields of west- central Kansas.Other types of deposits that are productive or may have some future economic interest are locally economic and possibly syngenetic red-bed copper occurrences in Oklahoma, Texas, Kansas, and Pennsylvania. Most widespread are the black shale and pyritic sandstone beds, some of which have been a source of pyrite for sulfur and sulfuric acid in conjunction with coal mining. Bedded barite deposits of possibly diagenetic origin have been mined in Arkansas. Diagenetic siderite concretions containing sulfides and barite were widespread sources of iron in the 19th century.

Economic Geology↗

Hydrogeology of a Biosolids-Application Site Near Deer Trail, Colorado, 1993-99

This report presents hydrogeology data and interpretations resulting from two studies related to biosolids applications at the Metro Wastewater Reclamation District property near Deer Trail, Colorado, done by the U.S. Geological Survey in cooperation with the Metro Wastewater Reclamation District: (1) a 1993-99 study of hydrology and water quality for the Metro Wastewater Reclamation District central property and (2) a 1999 study of regional bedrock-aquifer structure and local ground-water recharge. Biosolids were applied as a fertilizer during late 1993 through 1999. The 1993 Metro Wastewater Reclamation District property boundary constitutes the study area, but hydrogeologic structure maps for a much larger area are included in the report. The study area is located on the eastern margin of the Denver Basin, a bowl-shaped sequence of sedimentary rocks. The uppermost bedrock formations in the vicinity of the study area consist of the Pierre Shale, the Fox Hills Sandstone, and the Laramie Formation, parts of which comprise the Laramie-Fox Hills hydrostratigraphic unit and thus, where saturated, the Laramie-Fox Hills aquifer. In the vicinity of the study area, the Laramie-Fox Hills hydrostratigraphic unit dips gently to the northwest, crops out, and is partially eroded. The Laramie-Fox Hills aquifer is either absent or not fully saturated within the Metro Wastewater Reclamation District properties, although this aquifer is the principal aquifer used for domestic supply in the vicinity of the study area. Yield was small from two deep monitoring wells in the Laramie-Fox Hills aquifer within the study area. Depth to water in these wells was about 110 and 150 feet below land surface, and monthly water levels fluctuated 0.5 foot or less. Alluvial aquifers also are present in the unconsolidated sand and loess deposits in the valleys of the study area. Interactions of the deeper parts of the Laramie-Fox Hills aquifer with shallow ground water in the study area include a general close hydraulic connection between alluvial and bedrock aquifers, recharge of the Cottonwood Creek and much of the Muddy Creek alluvial aquifers by the bedrock aquifer, and possible recharge of the bedrock aquifer by a Rattlesnake Creek tributary. Some areas of shallow ground water were recharged by infiltration from rain or ponds, but other areas likely were recharged by other ground water. Data for shallow ground water indicate that ground-water recharge takes less than a day at some sites to about 40 years at another site. Depth to shallow ground water in the study area ranged from about 2 feet to about 37 feet below land surface. Shallow ground-water levels likely were affected by evapotranspiration. Ground water is present in shallow parts of the bedrock aquifer or in alluvial aquifers in four drainage basins: Badger Creek, Cottonwood Creek, Muddy Creek, and Rattlesnake Creek. These drainage basins generally contained only ephemeral streams, which flow only after intense rain.

Water-Resources Investigations Report↗

Ground-water control in the Neyveli lignite field, South Arcot district, Madras State, India

Unconsolidated deposits of the Cuddalore series of Miocene age underlie much of the coastal plain of southern Madras . Several lignite seams occur in a thick sequence of sand, gravel, and clay that dips seaward about 40 to 100 feet per mile. The principal seam of lignite mapped in the Neyveli area averages more than 50 feet in thickness, underlies at least 80 square miles, and occurs at a minimum depth of 165 feet near Neyveli , where deposits totalling 230 million tons have been proved in an area of 4J square miles. The lignite seam is immediately underlain, throughout its area of occurrence, by a thick bed of sand and gravel that contains artesian water, the head of which is more than 100 feet above the top of the lignite at Neyveli . The sand and gravel aquifer is exposed to recharge in and near its outcrop area, 6 to 10 miles northwest of Neyveli , where the average annual rainfall is 41 inches. Hydraulic tests of the aquifer indicate that ground-water control for mining by opencast from a pit 6,000 feet long and 1,200 feet wide will require continuous withdrawal of about 40,000 gallons (Imperial) per minute from wells in and adjacent to the mine. The well field , including 50 to 65 large-capacity wells, must move with the open cut; and no appreciable decrease in the withdrawal rate can be expected throughout the life of the mine, which is designed to produce about 3j million tons of raw lignite per year.

Madras State↗

Surficial geology and geomorphology of Potter County, Pennsylvania

Potter County is located in the Appalachian Plateaus of north-central Pennsylvania and contains the headwaters of the Genesee River, the Allegheny River, and the Susquehanna River. Drift of Wisconsin age covers the northeastern part of the county. This study includes a detailed survev of the surficial deposits of the Genesee quadrangle in north-central Potter County and a reconnaissance of the remainder of the county; a soil survey and a botanical survey were carried on concurrently. The region is a deeply dissected plateau having extensive areas of steeply sloping land separated by narrow ridges and valleys; there is very little level land. Near the junction of the three watersheds the uplands rise to altitudes of more than 2,500 feet. The maximum relief in the Susquehanna drainage is more than 1,500 feet; in the Genesee and Allegheny drainage it. is about 800 feet. Valley walls are steep (15° to 30°), and the uplands have gentle slopes (0.5° to 10°). The drainage pattern is trellised. The climate is continental. Temperatures range from about -30° F. to more than 100° F. The average annual precipitation ranges approximately from 34 to 42 inches. Floods may occur at any season of the year. The large volumes of water from rain or melting snow carried by small streams come from springs. There is little precise data on frost in the ground, but it is probable that the ground seldom freezes in forested areas. The soils of Potter County have relatively immature profiles with poorly developed horizons that commonly have many characteristics inherited from their parent materials. At the great soil group level, the zonal soils are divided into Podzol soils and Brown Podzolic soils. Many soils have a high silt content in the upper part of the profile, apparently derived (at least partly) from a mantle of eolian silt. Mos~ of Potter County is covered by second-growth forests consisting of 40- to 60-year-old hardwood stands. The present forests growing on slopes and summits are composed approximately of 25 species of trees. The northern hardwood region includes most of the county, with an oak-forest region near the borders, principally along its southern margin. Potter County is underlain by sandstone, siltstone, shale, conglomerate, and minor amounts of coal and calcareous rock that range in age from Late Devonian to Pennsylvanian. These rocks form broad open folds that strike northeast. South of the border of the Wisconsin drift, and possibly at two localities inside the drift border, are scattered remnants of ancient soils (here called paleosol), that were formed in preWisconsin time-probably during the Sangamon interglacial stage. This paleosol ranges in texture from clay loam to silt loam, ranges in color from yellowish red to red, includes a few percent to more than 25 percent of rock fragments, and apparently contains a small percentage of gibbsite and varying amounts of kaolinite. Known thicknesses range from 1 to 33 feet. Paleosol was developed on diverse kinds of parent material, such as till, stratified drift, colluvium, and residuum, at altitudes ranging from a few hundred to 2,400 feet. The climatic conditions under which the paleosol formed are uncertain; however, these ancient soils may record an episode of subtropical climatic conditions during which lateritic soils were formed. Perhaps these soils are analogous to the Red-Yellow Podzolic soils of southeastern United States. Except for one possible remnant, no pre-Wisconsin drift has been recognized in Potter County. The Wisconsin glacial deposits of Potter County belong to either the Iowan or Tazewell substages and are dominantly till with minor amounts of glaciofluvial deposits. Erratics of igneous or metamorphic rock comprise less than 0.1 percent of the total number of rock fragments. The till is slightly weathered to depths ranging from 3 to about 12 feet. The drift border is indefinite and has been drawn at the southern limit of erratics or well-rounded or striated pebbles and is only locally marked by a terminal moraine or by a distinct change in the surficial deposits. The drift border is relatively straight and crosses the Genesee quadrangle in a northwesterly direction with little regard for the major topographic features, thus suggesting that the Wisconsin ice sheet had a relatively straight and steep front. Over most of the unglaciated part of Potter County, the bedrock is concealed beneath rubble that probably was formed during the Iowan or Tazewell substage, almost contemporaneously with the adjacent drift. In general, the rubble is thickest and most extensive within about 10 miles of the drift border, becoming thinner and less continuous farther away. The apparent parallelism between a belt of thick periglacial deposits and the drift border suggests that the deposits result from climatic factors in operation while the Wisconsin ice sheet was nearby. Ancient soil structures or patterned ground occur at, or near, the surface of both the periglacial deposits and the adjacent drift. These ancient soil structures are so similar to modern forms in arctic or alpine environments that they are considered to be the result of vigorous frost action. Many of the structures are believed to be a result of down-slope movement of debris by solifluction, facilitated by a frozen subsoil as much as 10 feet deep. Perennially frozen ground may have been present, but this is not a prerequisite. The periglacial deposits underlie long smooth slopes that extend from ridge crest to valley bottom. Flood plains are absent near the headwaters of many streams, the valley walls forming a V-shaped profile. While frost action was in progress, forests probably were restricted to flood plains, lower slopes, and scattered upland areas. Large parts of the upland were bare or partly covered by tundra vegetation; elsewhere, there were scattered trees but no dense forest. 1 2 SURFICIAL GEOLOGY AND GEOMORPHOLOGY OF POTTER COUNTY, PENNSYLVANIA Recent alluvium and alluvial fans include sand and sandy loams, 1 to 3 feet thick, that overlie gravel. The alluvium contains organic matter and lenses of finer materials. Thickness ranges from a few to more than 100 feet. Along the principal streams the alluvium probably overlies Pleistocene deposits. Most of the alluvial fans are composed of unstratified rubbly, pebbly, cobbly. or bouldery sandy loams to silty clay loams with local lenses of stratified sand and gravel. The alluvial fans mapped in the Genesee quadrangle probably include both Wisconsin stage and Recent deposits. The summits of the A.ppalachian Plateaus in north-central Pennsylvania have long been recognized as the remnants or traces of one or more peneplains. To test this hypothesis, a restored contour map was prepared to show the configuration of a supposed peneplain on the assumption that the plateau tops are remnants of such an old erosion surface. The restored contours delineate a surface that corresponds roughly to rock structure. In general, the uplands slope parallel to the dip of the bedrock. The major streams, such as the West Branch Susquehanna River, cross the ridges and valleys of the restored surface in such a way that it is difficult to suppose that the restored surface was ever graded to these streams. On the contrary, it is probable that the restored surface never existed and that the plateau tops are structurally controlled surfaces held up by sandstone and conglomerate beds in the Pottsville and Pocono formations. The plateau tops may have been lowered by erosion as much as 200 feet during the Pleistocene-in other words, after the major streams were incised. If this portion of the Appalachian Plateaus was ever reduced to a peneplain, such a hypothetical surface must have lain many hundreds of feet above the uplands of the present day. The only alternative that might involve peneplanation is the improbable hypothesis that the plateau tops are remnants of a slightly deformed peneplain and that the peneplain was folded along the axes of the Appalachian orogeny. This remote possibility is not supported by any known evidence. The geomorphic analysis yields no new data on the origin of the cross-axial drainage. Regardless of whether the plateaus are peneplain remnants or are structurally controlled surfaces, the beginning of the major southeastward-flowing streams long antedates the existing landscape. The geomorphic history of Potter County begins with an assumed long interval of erosion during the Mesozoic and early Cenozoic eras, for which no record remains in this area. The southeast master drainage was established by the latter part of the Tertiary period (perhaps at a much earlier date), probably as the result of the northwestward migration of the Atlanticinterior divide. In late Pliocene(?) time, areas adjacent to parts of the West Branch Susquehanna River-and probably elsewhere-had a moderate relief ranging from 300 to 700 feet. Some segments of the West Branch meandered across a broad valley that lay about 900 feet above the present streams. The landscape probably was covered by deep residual soils, perhaps by saprolite. The early Pleistocene history of Potter County is essentially unknown. No deposits of the Kansan stage are known except for a possible trace of pre-Illinoian drift on the uplands in central Potter County (Ayers Hill quadrangle). Some deposits in central and eastern Pennsylvania may be of Kansan age. It is probable that the assumed Aftonian regolith was removed by mass movements and other processes during the Kansan stage, thus resulting in a lowering of the plateau tops by as much as 10 feet. By the close of the Yarmouth(?) interglacial stage the major streams were incised to essentially their present depths. The climates of the Yarmouth interglacial stage probably produced deep residual soils over the landscape, parts of which may still be preserved in the paleosol remnants of the present day. No Illinoian drift is known in Potter County, but drift assigned to this stage occurs in areas to the northwest and to the southeast. Some valleys, such as Kettle Creek valley, were filled with sand and gravel alluvium to depths of as much as 150 feet above their present flood plains. It is assumed that the Yarmouth residual soils were removed by mass movements and other processes induced by a periglacial climate, thus lowering the plateau tops by as much as 10 feet. During the Sangamon interglacial stage, deep (10-to-20 foot) residual soils or paleosol were developed in Potter County and probably throughout much of Pennsylvania, perhaps as a result of lateritic weathering in a subtropical climate. It is possible that the paleosol was largely removed by mass movements and by running water during late Sangamon time. During either the Iowan or Tazewell substages of the Wisconsin (perhaps the Iowan), the ice sheet advanced into the northeastern part of Potter County. The drift is similar to the Olean drift (local usage). The paleosol was almost completely removed by mass movements and other processes induced· by a periglacial climate, prior to drift deposition. This removal probably resulted in a lowering of the plateau tops by as much as 10 feet since Sangamon time. Nearly contemporaneously with drift deposition, the periglacial deposits were formed by frost heaving, solifluction, and fluvial transport in areas outside the drift border. Soil structures or patterned ground were developed on both the drift and the periglacial deposits. It is probable that the forests in the periglacial area were greatly restricted and that large areas on the uplands were essentially treeless. Little is known about the history of Potter County in postOlean time. Presumably, forests completely covered the county by the onset of the next substage, during which the Binghamton drift of MacClintock and Apfel was deposited. This drift also is found in southern New York State. The formation of the alluvium and alluvial fans probably began in the Tazewell substage and continued during the Recent epoch. Since these deposits were formed there has been very little dissection. There is little, if any, difference between soils developed on periglacial deposits and soils developed on drift. The roots of fallen trees have disturbed the soil horizons, and it is unlikely that the existing soil profiles are more than 500 years old. The forested landscape of Potter County has a distinctive microrelief ranging from a few inches to a few feet of mounds and pits produced by the roots of fallen trees. Most mounds and pits range from 10 to 20 feet in length and from 6 to 15 feet in width. On level land, many mounds are oriented with their long axes trending northward, and in some areas the orientation is random. On slopes, the mounds are oriented with their long axes at right angles to the maximum slope as a result of trees falling downslope. The toppling of trees increases the permeability of surficial deposits and mixes and destroys the soil horizons. The microrelief is a factor in forest development. The toppling of trees on slopes is a significant agent of slope erosion. The process loosens, breaks up, or overturns the upper 2 to 3 feet of the forest soil, and it tends to make the surficial layer more stony and to produce features resembling soil structures.

Pennsylvania↗

Comparison of peak-flow estimation methods for small drainage basins in Maine

Understanding the accuracy of commonly used methods for estimating peak streamflows is important because the designs of bridges, culverts, and other river structures are based on these flows. Different methods for estimating peak streamflows were analyzed for small drainage basins in Maine. For the smallest basins, with drainage areas of 0.2 to 1.0 square mile, nine peak streamflows from actual rainfall events at four crest-stage gaging stations were modeled by the Rational Method and the Natural Resource Conservation Service TR-20 method and compared to observed peak flows. The Rational Method had a root mean square error (RMSE) of -69.7 to 230 percent (which means that approximately two thirds of the modeled flows were within -69.7 to 230 percent of the observed flows). The TR-20 method had an RMSE of -98.0 to 5,010 percent. Both the Rational Method and TR-20 underestimated the observed flows in most cases. For small basins, with drainage areas of 1.0 to 10 square miles, modeled peak flows were compared to observed statistical peak flows with return periods of 2, 50, and 100 years for 17 streams in Maine and adjoining parts of New Hampshire. Peak flows were modeled by the Rational Method, the Natural Resources Conservation Service TR-20 method, U.S. Geological Survey regression equations, and the Probabilistic Rational Method. The regression equations were the most accurate method of computing peak flows in Maine for streams with drainage areas of 1.0 to 10 square miles with an RMSE of -34.3 to 52.2 percent for 50-year peak flows. The Probabilistic Rational Method was the next most accurate method (-38.5 to 62.6 percent). The Rational Method (-56.1 to 128 percent) and particularly the TR-20 method (-76.4 to 323 percent) had much larger errors. Both the TR-20 and regression methods had similar numbers of underpredictions and overpredictions. The Rational Method overpredicted most peak flows and the Probabilistic Rational Method tended to overpredict peak flows from the smaller (less than 5 square miles) drainage basins and underpredict peak flows from larger drainage basins. The results of this study are consistent with the most comprehensive analysis of observed and modeled peak streamflows in the United States, which analyzed statistical peak flows from 70 drainage basins in the Midwest and the Northwest.

Maine↗

Volcanic history and 40 Ar/ 39 Ar and 14 C geochronology of Terceira Island, Azores, Portugal

Seven new 40 Ar/ 39 Ar and 23 new radiocarbon ages of eruptive units, in support of new geologic mapping, improve the known chronology of Middle to Late Pleistocene and Holocene volcanic activity on the island of Terceira, Azores and define an east-to-west progression in stratovolcano growth. The argon ages indicate that Cinco Picos Volcano, the oldest on Terceira, completed its main subaerial cone building activity by about 370–380 ka. Collapse of the upper part of the stratovolcanic edifice to form a 7 × 9 km caldera occurred some time after 370 ka. Postcaldera eruptions of basalt from cinder cones on and near the caldera floor and trachytic pyroclastic flow and pumice fall deposits from younger volcanoes west of Cinco Picos have refilled much of the caldera. The southern portion of Guilherme Moniz Volcano, in the central part of the island, began erupting prior to 270 ka and produced trachyte domes, flows, and minor pyroclastic deposits until at least 111 ka. The northern part of Guilherme Moniz Caldera is less well exposed than the southern part, but reflects a similar age range. The northwest portion of the caldera was formed sometime after 44 ka. Several well-studied ignimbrites that blanket much of the island likely erupted from Guilherme Moniz Volcano. The Pico Alto Volcanic Center, a tightly spaced cluster of trachyte domes and short flows, is a younger part of Guilherme Moniz Volcano. Stratigraphic studies and our new radiocarbon ages suggest that most of the Pico Alto eruptions occurred during the period from about 9000 to 1000 years BP. Santa Barbara Volcano is the youngest stratovolcano on Terceira, began erupting prior to 29 ka, and has been active historically.

Azores↗

Neogene rotations and quasicontinuous deformation of the Pacific Northwest continental margin

Paleomagnetically determined rotations about vertical axes of 15 to 12 Ma flows of the Miocene Columbia River Basalt Group of Oregon and Washington decrease smoothly with distance from the plate margin, consistent with a simple physical model for continental deformation that assumes the lithosphere behaves as a thin layer of fluid. The average rate of northward translation of the continental margin since 15 Ma calculated from the rotations, using this model, is about 15 mm/yr, which suggests that much of the tangential motion between the Juan de Fuca and North American plates since middle Miocene time has been taken up by deformation of North America. The fluid-like character of the large-scale deformation implies that the brittle upper crust follows the motions of the deeper parts of the lithosphere.

Geology↗

The Northeast Stream Quality Assessment

In 2016, the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) is assessing stream quality in the northeastern United States. The goal of the Northeast Stream Quality Assessment (NESQA) is to assess the quality of streams in the region by characterizing multiple water-quality factors that are stressors to aquatic life and evaluating the relation between these stressors and biological communities. The focus of NESQA in 2016 will be on the effects of urbanization and agriculture on stream quality in all or parts of eight states: Connecticut, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, and Vermont. Findings will provide the public and policymakers with information about the most critical factors affecting stream quality, thus providing insights about possible approaches to protect the health of streams in the region. The NESQA study will be the fourth regional study conducted as part of NAWQA and will be of similar design and scope to the first three, in the Midwest in 2013, the Southeast in 2014, and the Pacific Northwest in 2015 ( http://txpub.usgs.gov/RSQA/ ).

Connecticut, Massachusetts, New Hampshire, New Jer↗

Sediment yields for selected streams in Texas

The U.S. Geological Survey began a study to determine sediment yields for selected streams in Texas during the 1966 water year to provide information for areas in which sediment-yield data were meager or lacking. These data will aid in delineating problem areas and planning for water-resources development in the State. This report presents estimates of suspended-sediment loads and yields from 20 drainage basins ranging in area from 26 to 1,410 square miles. These estimates are based on samples collected periodically during water years 1966-74. Sediment loads ranged from 1,500 tons per year at the station North Fork Hubbard Creek near Albany to 278,000 tons per year at the station Wichita River at Wichita Falls. Sediment yields ranged from 15 tons per square mile per year in the drainage area of East Yegua Creek near Dime Box to 500 tons per square mile per year in the drainage area of Denton Creek near Justin. Sediment yields from drainage areas generally decrease from northwest to southeast across the State.

Texas↗

Geology of the north end of the Salt Valley Anticline, Grand County, Utah

This report describes the geology and hydrology of a portion of the Salt Valley anticline lying north of Moab, Utah, that is being studied as a potential site for underground storage of nuclear waste in salt. Selection of this area was based on recommendations made in an earlier appraisal of the potential of Paradox basin salt deposits for such use. Part of sec. 5, T. 23 S., R. 20 E. has been selected as a site for subsurface investigation as a potential repository for radioactive waste. This site has easy access to transportation, is on public land, is isolated from human habitation, is not visible from Arches National Park, and the salt body lies within about 800 feet (244 m) of the surface. Further exploration should include investigation of possible ground water in the caprock and physical exploration of the salt body to identify a thick bed of salt for use as a storage zone that can be isolated from the shaly interbeds that possibly contain quantities of hydrocarbons. Salt Valley anticline, a northwest-trending diapiric structure, consists of Mesozoic sedimentary rocks arched over a thick core of salt of the Paradox Member of the Middle Pennsylvanian Hermosa Formation. Salt began to migrate to form and/or develop this structure shortly after it was deposited, probably in response to faulting. This migration caused upwelling of the salt creating a linear positive area. This positive area, in turn, caused increased deposition of sediments in adjacent areas which further enhanced salt migration. Not until late Jurassic time had flowage of the salt slowed sufficiently to allow sediments of the Morrison and younger formations to be deposited across the salt welt. A thick cap of insoluble residue was formed on top of the salt diapir as a result of salt dissolution through time. The crest of the anticline is breached; it collapsed in two stages during the Tertiary Period. The first stage was graben collapse during the early Tertiary; the second stage occurred after Miocene regional uplift had caused downcutting streams to breach the salt core resulting in further collapse. The axis of the anticline is a narrow generally flat-floored valley containing a few hills composed of downdropped Mesozoic rocks foundered, in the caprock. The caprock, which underlies thin alluvium in the valley, is composed of contorted gypsum, shale, sandstone, and limestone--the insoluble residue of the Paradox salt.

Open-File Report↗

Stratigraphy and hydrologic conditions at the Brookhaven National Laboratory and vicinity, Suffolk County, New York, 1994-97

Brookhaven National Laboratory (BNL) has installed many test borings as part of an effort to delineate the extent of ground-water contamination at the site. In 1994, the U.S. Geological Survey began a study in cooperation with BNL to define the stratigraphy in the 28-square-mile area encompassing BNL, and to monitor ground-water levels in the 300 squaremile area of central Suffolk County that surrounds BNL. The uppermost geologic units at BNL are of Pleistocene age. These sediments are underlain unconformably by the Matawan Group-Magothy Formation, undifferentiated (referred to as the Magothy Formation), of Cretaceous age, which typically consists of light- to dark-gray, variably sorted sand interbedded with light- to dark-gray clay layers; it also contains beds of grayish-brown to brownish-gray sand. Bed thicknesses differ substantially within each boring and tend to be laterally discontinuous as a result of their terrestrial deltaic depositional environment, although a prominent clay unit, referred to as the ?grayish-brown clay? in this report, was encountered at many borings. Pollen-sample analyses confirm that this unit is of Cretaceous age and is the uppermost unit of Cretaceous sediments in several parts of the study area. The upper surface of the Cretaceous deposits is irregular within the 28-square-mile study area and has relief of about 120 feet. Several prominent channels and ridges in the surface are aligned generally northwest-southeast. The Cretaceous surface beneath BNL is characterized more by local erosional features than by the regional cuesta shape that was suggested by previous authors. The overlying Pleistocene-aged units include (1) a sand layer overlain by the Gardiners Clay, (2) the Gardiners Clay, and (3) upper Pleistocene deposits, which include the Upton unit, glacial outwash, glaciolacustrine deposits, and terminal moraine deposits. The sand unit below the Gardiners Clay was the first Pleistocene unit to be deposited atop the irregular surface of the Cretaceous deposits in this area. The Gardiners Clay was deposited during a major rise in sea level as the sea encroached into parts of the present-day BNL study area. The shallow part of the upper Pleistocene deposits generally consists of light-brown sand and gravel but overlies green to grayish-green, variably sorted sand, silt, and clay at altitudes of 50 to 70 feet below sea level in some parts of the study area. This lower part of the upper Pleistocene deposits in the study area was referred to by previous investigators as the unidentified unit and has been designated as the Upton unit in this report. The discharge of ground water to the Peconic and Carmans Rivers locally affects the water-table configuration. The main ground-water divide on Long Island is about 0.5 miles north of the site; a secondary divide originates near the start of flow of the Peconic River and extends east-southeastward toward the South Fork. The water-table configuration on the BNL site is affected by pumping from supply wells and remediation wells, by infiltration of the water through recharge basins, by discharge from the sewage-treatment plant, and by local near-surface clay units. The horizontal hydraulic gradient at BNL typically is 0.001 foot per foot but can steepen near recharge basins and pumping wells. Vertical flow gradients within the upper Pleistocene deposits (upper glacial aquifer) were as large as 0.007 foot per foot (downward) in the northern part of BNL and were negligible in the southern part. Downward vertical gradients between the lower part of the upper glacial aquifer and the upper part of the Magothy Formation (Magothy aquifer) were about 0.018 foot per foot throughout the site.

Water-Resources Investigations Report↗

Geology of the Stroudsburg quadrangle and Adjacent areas, Pennsylvania--New Jersey

The Stroudsburg area is within the Valley and Ridge and Great Valley physiographic provinces, Northampton and Monroe Counties, Pennsylvania, and Warren County, New Jersey. The northeast-trending subparallel valleys and ridges resulted from erosion of folded heterogeneous sedimentary rocks. These are Middle Ordovician to Middle Devonian in age and are more than 17,000 feet thick. Deposition of a thick flysch sequence (Martinsburg Formation of Ordovician age) accompanied onset of Taconic orogenesis. It was followed by deposition of a thick molasse sequence of Silurian and Early Devonian age (continental and marginal-marine clastics--Shawangunk Formation and Bloomsburg Red Beds--overlain by predominantly marginal-marine and subtidal limestone, dolomite, shale, and sandstone--Poxono Island Formation through Oriskany Group). Basin deepening and gradual shallowing occurred during Esopus through Mahantango deposition, heralding the Acadian clastic wedge exposed north of the Stroudsburg area. Interpretation of sedimentary structures and regional stratigraphic relations suggest that the Silurian and Devonian rocks were deposited in the following environments: A1luviated coastal plain (meandering and braided streams), tidal flats (supratidal and intertidal), barrier zone, and neritic zone (upper and lower). The rock stratigraphic units have been grouped into four lithotectonic units, each having a different style of deformation. Folds produced in these rocks are disharmonic, and it is believed that each rock sequence is set off from units above and below by decollements, or zones of detachment. Movement was northwest into the Appalachian basin, primarily by gravitational sliding. The contact between the Shawangunk Formation of Silurian age and Martinsburg Formation of Ordovician age, is one zone of detachment as well as an angular unconformity. Deformational effects of the Middle to Late Ordovician Taconic orogeny are elusive, but it appears that the folds and most minor structures, including the prominent regional cleavage, were produced during the late Paleozoic Appalachian orogeny and are superimposed upon larger Taconic folds and faults. Field relations and microscopic study suggest that the regional cleavage in the Stroudsburg area is due to laminar flow of pelitic material along cleavage folia accompanied by mechanical reorientation of platy and elongate minerals and neocrystallization of mica, quartz, chlorite, and probably albite. Numerous lines of evidence point to the conclusion that cleavage developed after the rock was indurated and formed at, and Just below, conditions of low-grade metamorphism. Intensity of cleavage development increases to the southeast across the area. Second-generation slip cleavage, also believed to be Appalachian in age, formed by mechanical reorientation of minerals as well as by limited new mineral growth. The topography had a profound effect on the direction of movement of the Wisconsin glacier, as well as the manner of its retreat and the deposits that were formed. Till and stratified drift of Wisconsin age and till of Illinoian(?) age are common in the area. Wisconsin deglaciation occurred by northeastward retreat and by stagnation. A conspicuous terminal moraine marks the limit of Wisconsin ice movement. Lake Sciota was dammed between the retreating ice, the moraine, and the surrounding ridges north of Godfrey Ridge. Several deltas mark ice stand positions during the retreat of the ice. Lake-bottom and kame deposits are locally common in Cherry Valley. South of Kittatinny Mountain, on the other hand, melt water was freely discharged to the south. The wind and water gaps in the Stroudsburg area (including Delaware Water Gap and Wind Gap) are structurally controlled; specifically they are located where folds die out in short distances, where folding is locally more intense, or where resistant rocks dip steeply and have a narrow width of outcrop. This conclusion is contrary to

Open-File Report↗

Geology and ground-water conditions of Clark County, Washington, with a description of a major alluvial aquifer along the Columbia River

This report presents the results of an investigation of the ground-water resources of the populated parts of Clark County. Yields adequate for irrigation can be obtained from wells inmost farmed areas in Clark County, Wash. The total available supply is sufficient for all foreseeable irrigation developments. In a few local areas aquifers are fine-grained, and yields of individual wells are low. An enormous ground-water supply is available from a major alluvial aquifer underlying the flood plain of the Columbia River in the vicinity of Vancouver, Camas, and Washougal, where the aquifer is recharged, in part, by infiltration from the river. Yields of individual wells are large, ranging to as much as 4,000 gpm (gallons per minute). Clark County lies along the western flank of the Cascade Range. in the structural lowland (Willamette-Puget trough) between those mountains and the Coast Ranges to the west. The area covered by the report includes the urban, the suburban, and most of the agricultural lands in the county. These lands lie on a Series of nearly fiat plains and benches which rise steplike from the level of the Columbia River (a few feet above sea level) to about 800 feet above sea level. Clark County is-drained by the Columbia River (the trunk stream of the Pacific Northwest) and its tributaries. The Columbia River forms the southern and western boundaries of the county. Although the climate of the county is considered to be humid, the precipitation ranging from about 37 to more than 110 inches annually in various parts of the county, the unequal seasonal distribution (about 1.5 inches total for ;July and August in the agricultural area) makes irrigation highly desirable for most .crops and essential for some specialized crops. Consolidated rocks of Eocene to Miocene age, chiefly volcanic lava flows and pyroclastics but including some sedimentary strata, crop out in the foothills of the Cascades in the eastern part of the county and underlie the younger, unconsolidated rocks in the lowlands to the west At most places small to moderate quantities of water can be obtained from fractures in the older consolidated rocks. However, in the populated parts of the county, these rocks generally are overlain by considerable thicknesses of more permeable materials, and few wells have been drilled in them. Springs and dug wells yield an ample domestic supply at a number of outlying farms in the foothills. The younger (Pliocene to Recent) unconsolidated materials were deposited chiefly by streams in the basin formed by downwarping of the older rocks. However, some lake deposits and glacial drift also are included. The oldest unit of this group, the lower member of the Troutdale formation of Pliocene age, consists chiefly of clay, silt, and fine sand but includes lenses of coarser sand and, rarely, gravel. The maximum known thickness of the lower member of the Troutdale formation is about 660 feet. This unit is not a good aquifer because most of the strata are fine grained. However, at a few places drilled wells have penetrated lenses of coarser grained materials in these deposits and have obtained small to moderate amounts of water from them. The upper member of the Troutdale formation consists almost entirely of lightly to moderately cemented gravel, of which the most striking feature is the presence of a considerable percentage of quartzite pebbles. The average thickness of the upper member of the Troutdale may originally have been 300 to 400 feet. The member crops out over considerable areas in the county and, where conditions of topography and exposure are optimum, has beer very deeply weathered. It is suggested that the upper member of the Troutdale formation may prove to be of early Pleistocene age.

Washington↗

Upper Cretaceous sequences and sea-level history, New Jersey Coastal Plain

We developed a Late Cretaceous sealevel estimate from Upper Cretaceous sequences at Bass River and Ancora, New Jersey (ODP [Ocean Drilling Program] Leg 174AX). We dated 11-14 sequences by integrating Sr isotope and biostratigraphy (age resolution ??0.5 m.y.) and then estimated paleoenvironmental changes within the sequences from lithofacies and biofacies analyses. Sequences generally shallow upsection from middle-neritic to inner-neritic paleodepths, as shown by the transition from thin basal glauconite shelf sands (transgressive systems tracts [TST]), to medial-prodelta silty clays (highstand systems tracts [HST]), and finally to upper-delta-front quartz sands (HST). Sea-level estimates obtained by backstripping (accounting for paleodepth variations, sediment loading, compaction, and basin subsidence) indicate that large (>25 m) and rapid (???1 m.y.) sea-level variations occurred during the Late Cretaceous greenhouse world. The fact that the timing of Upper Cretaceous sequence boundaries in New Jersey is similar to the sea-level lowering records of Exxon Production Research Company (EPR), northwest European sections, and Russian platform outcrops points to a global cause. Because backstripping, seismicity, seismic stratigraphic data, and sediment-distribution patterns all indicate minimal tectonic effects on the New Jersey Coastal Plain, we interpret that we have isolated a eustatic signature. The only known mechanism that can explain such global changes-glacio-eustasy-is consistent with foraminiferal ??18O data. Either continental ice sheets paced sea-level changes during the Late Cretaceous, or our understanding of causal mechanisms for global sea-level change is fundamentally flawed. Comparison of our eustatic history with published ice-sheet models and Milankovitch predictions suggests that small (5-10 ?? 106 km3), ephemeral, and areally restricted Antarctic ice sheets paced the Late Cretaceous global sea-level change. New Jersey and Russian eustatic estimates are typically one-half of the EPR amplitudes, though this difference varies through time, yielding markedly different eustatic curves. We conclude that New Jersey provides the best available estimate for Late Cretaceous sea-level variations. ?? 2004 Geological Society America.

Geological Society of America Bulletin↗

Geologic map of the Big Delta B-2 quadrangle, east-central Alaska

New 1:63,360-scale geologic mapping of the Big Delta B-2 quadrangle provides important data on the structural setting and age of geologic units, as well as on the timing of gold mineralization plutonism within the Yukon-Tanana Upland of east-central Alaska. Gold exploration has remained active throughout the region in response to the discovery of the Pogo gold deposit, which lies within the northwestern part of the quadrangle near the south bank of the Goodpaster River. Geologic mapping and associated geochronological and geochemical studies by the U.S. Geological Survey (USGS) and the Alaska Department of Natural Resources, Division of Mining and Water Management, provide baseline data to help understand the regional geologic framework. Teck Cominco Limited geologists have provided the geologic mapping for the area that overlies the Pogo gold deposit as well as logistical support, which has lead to a much improved and informative product. The Yukon-Tanana Upland lies within the Tintina province in Alaska and consists of Paleozoic and possibly older(?) supracrustal rocks intruded by Paleozoic (Devonian to Mississippian) and Cretaceous plutons. The oldest rocks in the Big Delta B-2 quadrangle are Paleozoic gneisses of both plutonic and sedimentary origin. Paleozoic deformation, potentially associated with plutonism, was obscured by intense Mesozoic deformation and metamorphism. At least some of the rocks in the quadrangle underwent tectonism during the Middle Jurassic (about 188 Ma), and were subsequently deformed in an Early Cretaceous contractional event between about 130 and 116 Ma. New U-Pb SHRIMP data presented here on zircons from the Paleozoic biotite gneisses record inherited cores that range from 363 Ma to about 2,130 Ma and have rims of euhedral Early Cretaceous metamorphic overgrowths (116 +/- 4 Ma), interpreted to record recrystallization during Cretaceous west-northwest-directed thrusting and folding. U-Pb SHRIMP dating of monazite from a Paleozoic gneiss sample yields an age of 112 +/- 2 Ma; the monazite presumably grew during the waning stages of the intense regional Cretaceous ductile deformation. The Cretaceous ductile deformation was followed closely by granite plutonism and gold mineralization. The main pulse of gold mineralization is temporally and spatially associated with the Cretaceous granitic dikes and plutons and occurred during regional uplift and extension.

IMAP↗