USGS Science⌕ Search

SEARCH · USGS Science

Results for “International Journal of Environmental Science and Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 77Linked to original sources
USGS2024

SCEC/USGS Community Stress Drop Validation Study: How spectral fitting approaches influence measured source parameters

Spectral source parameters used to estimate an earthquake’s stress drop (Δσ) can vary significantly across measurement approaches. The Statewide California Earthquake Center/U.S. Geological Survey Community Stress-Drop Validation Study was initiated to compare source parameter estimates, focusing initially on a dataset from the 2019 Ridgecrest earthquake sequence. As part of that validation effort, here we focus on one potential source of uncertainty: whether spectral fitting approaches alone, applied to a common set of spectra from the 2019 Ridgecrest sequence result in different source parameter estimates. By using a common set of benchmark spectra analyzed across a consistent frequency band of 1–40 Hz, we eliminate many sources of variability. A subgroup of validation study participants volunteered to estimate the low-frequency displacement (Ω0) and corner frequency ( f c ) by fitting a smooth function to benchmark displacement spectra. Participants used linear- or log-sampled spectra, assumed a Brune or Boatwright spectral model, and applied different misfit criteria. We compare 17 approaches used to estimate Ω0, f c , and Δσ for 54 earthquake spectra. Our results reveal that 35% of events have Δσ estimates within a factor of two, whereas others exhibit variations exceeding an order of magnitude. The variability in Ω0 and f c can largely be attributed to whether a spectrum is consistent with the smooth function of an idealized simple crack model. The trade-off between Ω0 and f c may be more pronounced when using linearly sampled spectra, as higher frequency spectral bumps control the fits. As expected, methods that assumed a Boatwright model tended to have lower Ω0 and somewhat higher f c compared to those assuming a Brune model, although resulting Δσ estimates are similar. When compared to the overall validation study results, the fitting approach alone may account for between 5% and 90% (25% on average) of the total variability in spectral Δσ.

California↗
USGS2025

Quantifying groundwater response and uncertainty in beaver-influenced mountainous floodplains using machine learning-based model calibration

Beavers ( Castor canadensis ) alter river corridor hydrology by creating ponds and inundating floodplains, and thereby improving surface water storage. However, the impact of inundation on groundwater, particularly in mountainous alluvial floodplains with permeable gravel/cobble layers overlain by a soil layer, remains uncertain. Numerical modeling across various floodplain structures considers topographic and sediment complexity and multidirectional flow, linking inundation to groundwater response. This study develops a model-data integration workflow to address uncertainty in groundwater response to beaver-induced inundations in a mountainous alluvial floodplain in the Upper Colorado River Basin. Uncertain factors include seasonal hydrologic dynamics, hydraulic conductivities, floodplain structures, and meteorological forcings. We employed an ensemble of groundwater models, based on geophysical and hydrologic data, with machine learning-based calibration using a neural density estimator. This allowed us to quantify the vertical flux from the soil layer to the permeable gravel bed, the down-valley underflow within the gravel bed, and their ratios. Results show a significant increase in the vertical flux relative to down-valley underflow, from 2% during dry pond periods to 20% during wet periods, serving as an analogy for conditions without and with beaver ponds. The study highlights the influence of floodplain structure on groundwater storage, water balance, and water quality impacted by beaver ponds. A thick gravel bed layer, with a large down-valley underflow, minimizes the effect of beaver-induced inundation on water quality. We emphasize the need for field-scale measurements of floodplain structure and improved characterization of evapotranspiration changes to reduce uncertainty in groundwater response.

Colorado↗
USGS2024

Chloride concentrations in groundwater from the western part of the Southern Hills regional aquifer system, Louisiana, 2021–22

Groundwater is heavily used for public supply and industrial uses in the Baton Rouge, Louisiana, area. Lowered water levels resulting from groundwater withdrawals have induced the movement of saltwater towards wells in East Baton Rouge and West Baton Rouge Parishes. Saltwater intrusion has the potential to affect water supply infrastructure, reduce water availability for some uses, and increase treatment costs. To document current conditions, samples were collected from 161 wells screened in 10 aquifers of the Southern Hills regional aquifer system during November 2021 through February 2022. The results were compared with historical data to identify where chloride concentrations are increasing, which could indicate that saltwater intrusion is occurring. Saltwater intrusion, to varying degrees and areal extents, was observed in most of the 10 aquifers. The limited availability of monitoring wells near or within some of the known saltwater plume areas restricts tracking of the movement or delineation of the plumes’ current extents.

Louisiana↗
USGS2026

From model to action: Identifying the gaps in coastal marsh models for decision making

Coastal salt marsh modeling projects are designed to answer questions about where salt marshes may migrate, how they can migrate, and how they will be impacted by changing water levels. While this information is vital for climate-resilient marsh conservation, translating these findings into actionable results remains a challenge. The authors examined the actionability of marsh modeling efforts in the United States by analyzing data collected from semi-structured interviews of marsh model users ( n = 24) across two ongoing projects along the U.S. East Coast and the Gulf of America (Gulf of Mexico). By qualitatively analyzing the interview data, the authors found that the tasks of practitioners who use coastal marsh model outputs fall into three major themes: (1) marsh restoration, (2) planning with uncertainty, and (3) conserving habitat for marsh-reliant species. For each of these themes, the authors identify unmet needs, including high spatial resolution information for local planning, accessible descriptions of uncertainty to increase user confidence, and the incorporation of human dimensions data (e.g., human alterations to the landscape such as impoundments and culverts) for a comprehensive understanding of the coastal salt marsh. Marsh modeling projects should strategize how to fulfil these unmet user needs so that marsh modeling outputs can better support decisions related to marsh conservation and restoration.

Gulf of America, United States East Coast↗
USGS2025

Groundwater dominates snowmelt runoff and controls streamflow efficiency in the western United States

Climate change in seasonally snow-covered mountain catchments is reducing water supply and decreasing streamflow predictability. Here, we use tritium age dating to show that contrary to the common assumption that snowmelt quickly contributes to runoff, streamflow during snowmelt in western US catchments is dominated by older groundwater. The average age of streamwater during snowmelt runoff (5.7 ± 4.3 years) was intermediate to the average age of groundwater (10.4 ± 4.5 years) and recent precipitation, indicating that 58% (±34%) of snowmelt runoff was derived from groundwater. Water ages, streamflow, and groundwater storage were mediated by bedrock geology: low-permeability hard rock/shale catchments exhibited younger ages, less storage, and more efficient streamflow generation than high-permeability sandstone/clastic catchments. Our results demonstrate that snowmelt runoff is the result of multiple prior years of climate mediated by groundwater storage. Including these interactions will be crucial for predicting water resources as climate and landscape changes accelerate.

western united States↗
USGS2025

Groundwater budget for the surficial aquifer surrounding Lake Nokomis, Minneapolis, Minnesota

During prolonged periods of above-average precipitation, rising groundwater levels have the potential to cause damage to and interfere with underground infrastructure and building foundations. To understand the relations between precipitation and groundwater in the vicinity of Lake Nokomis, the U.S. Geological Survey, in collaboration with the University of Minnesota, quantified five components of the groundwater budget: groundwater recharge, change in surficial aquifer storage, surficial aquifer groundwater discharge to Lake Nokomis, groundwater evapotranspiration, and groundwater discharge to underlying bedrock aquifers. Field data, geologic records, and empirical calculation methods were used to quantify groundwater budget components for April 2023 through April 2024. Lake water budget data indicate that Lake Nokomis is a flowthrough system during periods with no outflow through the weir, with groundwater inputs equal to outputs. Roughly 40 percent of precipitation that fell in the study area was added to the surficial aquifer as recharge. Uncertainty in the vertical hydraulic conductivity resulted in wide-ranging estimates (spanning three orders of magnitude) of water discharging from the surficial aquifer to the underlying bedrock aquifer. Drought conditions persisted for the duration of this study and were not representative of the conditions that motivated this study. This study is a start towards understanding relations between precipitation, Lake Nokomis levels, and groundwater levels that could affect local underground infrastructure.

Minnesota↗
USGS2026

A temporal look at the influence of topographic amplification on earthquake-triggered landslides in 3D seismic simulations

Earthquakes are a primary trigger for landslides, often leading to catastrophic consequences. While numerous studies have explored the spatial distribution of earthquake-triggered landslides, understanding the interaction between seismic waves and topography remains a critical challenge. Topographic irregularities can cause seismic wave amplification, altering ground shaking, and can trigger landslides that are challenging for predictive models to anticipate. This study investigates the spatial and temporal evolution of topographically amplified landslides, focusing on coseismic landslides triggered by the Mw 7.5 mainshock of the 2018 Papua New Guinea earthquake and post-seismic landslides associated with its four aftershocks, each exceeding Mw 6.0. We employ low-frequency, three-dimensional numerical ground shaking simulations and data-driven multivariate analyses to examine how landslides evolved from the coseismic to post-seismic periods. Our findings reveal a spatial shift in landslide distribution, in which the mainshock triggered slope failures predominantly on steep hillslopes, and the aftershocks triggered landslides on gentler slopes, often near geologic boundaries. We attribute this transition partly to the earthquake legacy effect of the mainshock, where the mainshock caused weakening of these hillslopes, making them more prone to failure when aftershocks occur. Additionally, the concentration of failures along geologic contacts in the post-seismic phase suggests that site amplification, stemming from contrasts in subsurface materials, exerts a key influence on landslide occurrence. Although not explicitly captured in our current numerical simulations, this mechanism warrants further investigation for more accurate hazard modeling.

JGR Solid Earth↗
USGS2026

SlideDetect: Spatio-temporal landslide detection using a three-dimensional convolutional neural network

Landslides pose a serious and ongoing threat to both human lives and infrastructure worldwide; therefore, it is of interest to predict where and when landslides are likely to occur. Advances in machine learning techniques have spurred numerous studies aimed at estimating relative landslide propensity, but are limited to spatial (as opposed to temporal) prediction due to the sparsity of landslide timing data. We address this data gap by training SlideDetect, a 3-dimensional convolutional neural network (3D CNN), to identify landslides based on their spatial and temporal occurrence within multitemporal image stacks. We use an inventory of landsides triggered by the 2018 Hokkaido earthquake and two years of monthly composite optical imagery spanning this event. The model can identify not only landslide location but also landslide date with an area under the precision-recall curve (PR-AUC) of 0.84. We further present a new standard for presenting PR curve results that explicitly compares model performance at different confidence thresholds, allowing for clearer model evaluation and comparison. Our new approach to constraining landslide timing paired with this more consistent and objective method for evaluating model performance shows considerable promise, and with further application and testing, SlideDetect could enhance the data availability and tools needed to advance landslide hazard and risk assessments.

JGR Machine Learning and Computation↗
USGS2024

Predicted exposure of communities in southeastern United States to climate-related coastal hazards

A rigorous analysis of 21st Century multi-hazard exposure for U.S. Southeast Atlantic coastal communities indicates that up to 70% of residents will be exposed daily to shallow and emerging groundwater by ~2100, 15 times higher than from surficial flooding alone. This threat further exacerbates other coastal stressors, such as flooding, subsidence, and beach erosion, that impact these vulnerable coastal communities and ecosystems under expected future climate change scenarios.

Florida, Georgia, North Carolina, South Carolina, ↗
USGS2025

Completion summary for monitor wells NRF-17 and NRF-18 at the Naval Reactors Facility, Idaho National Laboratory, Idaho

The U.S. Geological Survey (USGS)—in cooperation with the U.S. Department of Energy (DOE) for the Naval Reactors Laboratory Field Office that supports operations for the Naval Reactors Facility (NRF) located at the Idaho National Laboratory (INL)—drilled and constructed well NRF-17 (formerly borehole USGS 151) and well NRF-18 (formerly borehole USGS 152) for stratigraphic framework analyses and water-quality monitoring at the Idaho National Laboratory (INL) near the NRF, in southeastern Idaho. Borehole USGS 151 was continuously cored from about 48 to 1,070 feet (ft) below land surface (BLS); rotary drilled from approximately 1,070 to 1,720 ft BLS; and re-drilled to complete construction as a monitor well NRF-17, completed to 461 ft BLS. Borehole USGS 152 was continuously cored from approximately 19 to 1,259 ft BLS; rotary drilled from approximately 1,259 to 1,630 ft BLS; and re-drilled to complete construction as a monitor well NRF-18, completed to 450 ft BLS. Geophysical data were examined with photographed core material to record lithologic descriptions and to suggest zones where groundwater flow was anticipated. Basalt flows varied from highly fractured to dense, with high-to-low vesiculation. Well NRF-17 generally was constructed in mostly dense basalt (greater than 75 percent), and well NRF-18 was constructed in primarily fractured and (or) vesicular basalt. In well NRF-17, the well capacity is directly affected by the limited amount of fractured basalt, which serves as the primary pathway for groundwater. This effect was observed during the pumping test conducted after the well's final construction. Single-well aquifer tests were done at wells NRF-17 and NRF-18 to provide estimates of transmissivity and hydraulic conductivity after final well construction and initial well development. Estimated values of transmissivity and hydraulic conductivity for well NRF-17 were 8.81 feet squared per day (ft 2 /d) and 1.04×10 -2 feet per day (ft/d), respectively. Estimated values of transmissivity and hydraulic conductivity for well NRF-18 were 4.77×10 3 ft 2 /d and 5.61 ft/d, respectively. The NRF-17 pump test resulted in 19.41 ft of measured drawdown at a sustained average pumping rate of 3.3 gallons per minute (gal/min). The NRF-18 pump test resulted in 0.55 ft of measured drawdown at a sustained average pumping rate of 31.0 gal/min. Water-quality samples collected from the two wells were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Water samples for select inorganic constituents showed concentrations consistent with signatures from tributary valley groundwater with influences from ephemeral surface-water recharge from the Big Lost River. Water-quality samples analyzed for stable isotopes of oxygen and hydrogen are consistent with signatures from tributary valley groundwater and surface-water recharge inputs to the aquifer. No measured water-quality results were greater than their respective maximum contaminant levels for public drinking-water supplies. Inorganic and nutrient water-quality results for well NRF-17 and well NRF-18 suggest the groundwater in this area is potentially affected by industrial wastewater disposal.

Idaho↗
USGS2026

Controls on natural hydrogen generation during serpentinization of mantle rocks

Mantle rocks undergoing serpentinization can generate significant amounts of natural hydrogen, yet the rates and controlling processes remain poorly understood. Here, we constrain the possible hydrogen generation rates in two distinct mantle rock types, the fertile lherzolites of the Western Pyrenees and the depleted harzburgites of Northern California, to relatively low rates of ~0.1 to ~0.5 tonnes H₂ yr⁻¹ km⁻³ of reactive rock. When integrated over the full reactive volumes, this corresponds to total production rates of ~300 to ~600 tonnes H₂ yr⁻¹. By combining three-dimensional geophysical inversion with numerical modelling of fluid-rock processes, we show that hydrogen generation rates are mainly limited by H₂ saturation in the fluid and reaction kinetics. Under these constraints, hydrogen generation in mantle-derived serpentinization systems proceeds slowly, making rapid large-scale replenishment unlikely and suggesting that large, economically relevant accumulations, would require timescales of thousands to tens of thousands of years to develop.

northern California, western Pyrenees↗
USGS2024

The new self-anchored suspension (SAS) San Francisco Bay Bridge- Its response to a small earthquake

This paper presents a summary of previously published work (Celebi 2023) related to the new Self-Anchored Suspension (SAS) bridge that went into service within the last decade as a replacement for the older truss bridge spanning between Yerba Buena Island and Oakland, California, within the San Francisco Bay Area. During the October 19, 1989 M6.9 Loma Prieta earthquake, which occurred ~100 km south of the Bay Bridge, a section of the upper deck of the truss bridge fell onto the lower deck – thus closing this important lifeline between San Francisco and Oakland. The SAS is unique, self-anchored, and suspended by a single tower that is pivotal in trafficking the cable and hanger system to support the decks. The SAS bridge is extensively instrumented by the California Geological Survey’s Strong Motion Instrumentation Program (CSMIP). There are approximately 85 channels of accelerometers in the seismic monitoring system that recorded the October 14, 2019 Mw4.6 Pleasant Hill earthquake. The data allow a complex but identifiable coupled response of the deck, tower, and cable system. Both acceleration and displacement time-history data are used to extract significant frequencies using system identification methods, including spectral analyses. Results are compared to those from finite-element-model (FEM) analyses carried out during the design and analysis process of the bridge in 2002 (Nader et al. 2002). There are differences between FEM analyses results and those from the low amplitude shaking caused by a seismic event. An apparent frequency (period) of the SAS bridge is assessed (approximately 5.2 seconds). In a plot of deck length versus period, there is an almost linear relationship with periods of other regular suspension bridges, such as the Golden Gate Bridge and the Carquinez Bridge, both in the San Francisco Bay.

California↗
USGS2025

Extremophile hotspots linked to containerized industrial waste dumping in a deep-sea basin

Decaying barrels on the seafloor linked to DDT contamination have raised concerns about the public health implications of decades old industrial waste dumped off the coast of Los Angeles. To explore their contents, we collected sediment cores perpendicular to five deep-sea barrels. The concentration of DDT and its breakdown products were highly elevated relative to control sites yet did not vary with distance from the barrels, suggesting that they were not associated with the contamination. Sediment cores collected through white halos surrounding three barrels were enriched in calcite and had elevated pH. The associated microbial communities were low diversity and dominated by alkalophilic bacteria with metagenome-assembled genomes adapted to high pH. A solid concretion sampled between a white halo and barrel was composed of brucite, a magnesium hydroxide mineral that forms at high pH. Based on these findings, we postulate that leakage of containerized alkaline waste triggered the formation of mineral concretions that are slowly dissolving and raising the pH of the surrounding sediment pore water. This selects for taxa adapted to extreme alkalinity and drives the precipitation of “anthropogenic” carbonates forming white halos, which serve as a visual identifier of barrels that contained alkaline waste. Remarkably, containerized alkaline waste discarded >50 years ago represents a persistent pollutant creating localized mineral formations and microbial communities that resemble those observed at some hydrothermal systems. These formations were observed at one-third of the visually identified barrels in the San Pedro Basin and have unforeseen, long-term consequences for benthic communities in the region.

California↗
USGS2024

Parameter ESTimation with the Gauss–Levenberg–Marquardt algorithm: An intuitive guide

In this paper, we review the derivation of the Gauss–Levenberg–Marquardt (GLM) algorithm and its extension to ensemble parameter estimation. We explore the use of graphical methods to provide insights into how the algorithm works in practice and discuss the implications of both algorithm tuning parameters and objective function construction in performance. Some insights include understanding the control of both parameter trajectory and step size for GLM as a function of tuning parameters. Furthermore, for the iterative Ensemble Smoother (iES), we discuss the importance of noise on observations and show how iES can cope with non-unique outcomes based on objective function construction. These insights are valuable for modelers using PEST, PEST++, or similar parameter estimation tools.

Groundwater↗
USGS2025

SURF: An automated method for building nonplanar 3D fault models from earthquake hypocenters

Accurately characterizing 3D fault geometry is vital for improving our understanding of earthquake behavior and informing the development of seismic hazard models. Despite their importance, subsurface fault structures tend to be poorly constrained because of limitations in observational data. Improvements to the seismic networks and earthquake detection algorithms have increased the precision and volume of earthquake catalogs, which help illuminate detailed subsurface fault structure and provide the most direct information available about fault geometries at depth. We present a Python package to automate generating 3D fault geometries directly from hypocentral seismicity patterns. This method begins with clustering events based on their spatial density, identifying coherent patterns. Nearby clusters are then merged based on the similarity of their orientations. We fit nonplanar surfaces using support vector regression to balance surface accuracy with minimal deviations from planarity. The fault models are output as quadrilateral meshes at user‐defined resolution. In the process of generating the 3D fault surfaces, we compute the spatial density of seismicity around the surface and the planarity as quantitative metrics of the model outputs. As a proof of concept, we apply this approach to the San Andreas–Calaveras fault junction region and the 2019 Ridgecrest earthquake sequence, both in California, which contain complex subparallel faults well defined at the Earth’s surface and abundant microseismicity. These case studies demonstrate the method’s ability to model complex fault structures, including long continuous fault surfaces, crossing faults, variably dipping segments, and subparallel faults. We test the method on both standard network catalogs and double‐difference relocated catalogs. We find that our seismicity‐based fault model results align with published 3D models that incorporate additional constraints and interpretations ( Plesch et al. , 2020 ; Aagaard and Hirakawa, 2021 ). This workflow provides a low‐user‐input solution for estimating fault geometries at depth from earthquake catalogs.

California↗
USGS2024

Earthquake-triggered ground-failure inventory associated with the M7.1 2018 Southcentral Alaska earthquake

The 30 November 2018, magnitude (Mw) 7.1 earthquake in Southcentral Alaska triggered substantial landslides, liquefaction, and ground cracking throughout the region, resulting in widespread geotechnical damage to buildings and infrastructure. Despite a challenging reconnaissance and remote-sensing environment, we constructed a detailed digital inventory of ground failure associated with the event from several sources. Sources included information derived from remotely sensed data, and data compiled from literature, social media postings, and earthquake damage information compiled by local, state, and federal agencies. Each instance of ground failure within the inventory contains information on the location and type of observed ground failure, and the methods and data used to document the occurrence. Where high-quality data, such as LIDAR or satellite imagery, were available and showed the ground-failure instance clearly, the extent is mapped as a polygon or polyline. All other locations are mapped as points. There are a total of 886 ground-failure instances documented within the inventory (400 landslides, 286 liquefaction features, and 200 features unattributed to specific processes). A semi-quantitative confidence scheme is used to describe mapping certainty associated with each ground-failure feature. This inventory represents a relatively moderate ground-failure-triggering event that occurred in a subarctic environment. This data paper describes the content within the inventory, the inventory data collection procedures, and limitations of the data. Events of this type are not often documented in detail; thus, adding the inventory data to the US Geological Survey Open Repository of Earthquake-Triggered Ground-Failure Inventories further diversifies the datasets available to the scientific community to be used to better understand and model earthquake-triggered ground failure.

Alaska↗
USGS2024

Site response in the Walnut Creek–Concord region of the San Francisco Bay, California: Ground motion amplification in a fault-bounded basin

Thirty‐seven portable accelerometers were deployed in the eastern San Francisco Bay communities of Walnut Creek and Concord to study site response in a fault‐bounded, urban, sedimentary basin. Local earthquakes were recorded for a period of two years from 2017 to 2019 resulting in 101 well‐recorded events. Site response is estimated by two methods: the reference site spectral ratio method and a source‐site spectral inversion method. The reference site spectral ratio method allows investigation of the variability of site amplification with source azimuth and frequency. The source‐site spectral inversion method yields the best least‐squares fit to site response for a database of ground‐motion records. Both methods show substantial amplification in the Walnut Creek–Concord basin below 2 Hz indicating strong surface‐wave development. Greater amplification is seen for sources aligned along the long axis of the basin. Inversion using close‐in sources at short distances yields lower amplification at longer periods than the entire data set due to reduced surface‐wave generation for steeper angles of incidence. Inversion of site response spectra for shallow shear‐wave velocity using a global search algorithm yields V S30 values consistent with generalized mapping results based on geology and topography but with greater variability due to local site variations. 3D finite‐element modeling shows greater amplification in the Walnut Creek–Concord basin with a basin‐edge effect likely contributing to higher ground motions. Topography is also seen to lead to increased scattering and shadowing effects.

California↗
USGS2026

Season and antecedent conditions impact concentration-discharge relationships for dissolved organic carbon and alkalinity in southeast Alaskan watershed

Fluvial export of dissolved carbon plays an important role in watershed-scale biogeochemistry. Predicted changes in climate are expected to impact watershed hydrologic regimes, and in turn, the sources and export of dissolved carbon from watersheds. Here, we utilize high resolution measurements of discharge and dissolved carbon concentration to examine how concentration-discharge (CQ) relationships vary seasonally and during high flow events over the main runoff season (May–October) in a temperate forested watershed in Southeast Alaska. Concentration-discharge relationships for dissolved organic carbon (DOC) and alkalinity demonstrated strong seasonal patterns, with more linear relationships in May and June versus other months. Changing power law model slopes ( b values; the exponent in a power law regression between runoff and carbon yields) indicated potentially shifting watershed sources (biogenic vs. geologic) and contrasting dominant flowpaths (shallow vs. deeper groundwater) for DOC and alkalinity over the sampling period. During the largest storm event of the study, DOC and alkalinity b values shifted from an overall pattern of transport (mean b = 1.58 values >1.0 indicate transport limitation) and source limitation (mean b = 0.48, values <1.0 indicate source limitation) to chemostatic (DOC, b = 0.99; alkalinity, b = 1.019). In June through August, patterns in hysteresis index suggest that CQ relationships were altered when storms followed in close succession to each other. Together, these findings indicate that seasonal and antecedent flow conditions play a role in dissolved carbon export from forested watersheds. Understanding these dynamics, particularly during winter months, will become increasingly important as changes to hydroclimate impact riverine carbon export.

Alaska↗