USGS Science⌕ Search

SEARCH · USGS Science

Results for “Economic Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77Linked to original sources
USGS2021

Mineral resource inventory of North Dakota

Aside from construction aggregate materials, the value of nonfuel mineral commodities that have been produced in North Dakota is small, although there is potential for the existence of several mineral resource deposit types which are not economically viable at this time. In this report, we present a mineral resource inventory of the State of North Dakota, developed by the U.S. Geological Survey at the request the Bureau of Land Management. To set the stage for that inventory, we briefly outline the long and complex geologic history of North Dakota that extends back more than 3 billion years. Using several existing databases, we summarize the distribution of known mineral commodities and the results of commodity exploration over time. Using all available data, we discuss the potential for economic occurrences of 13 commodities in North Dakota, including some listed as Critical Minerals.

North Dakota↗
USGS1929

Geology of the De Queen and Caddo Gap quadrangles, Arkansas

The field study of the geology of the De Queen and Caddo Gap quadrangles extended over a period of many years, and although the scientific and economic results from the study are here set forth fully for the first time in a single report, a number of publications have been issued that have presented some of the more important results. The field work was begun in 1907 and continued intermittently until 1925. The work in 1907 was done under a cooperative agreement between the United States Geological Survey and the Arkansas Geological Survey and involved primarily an investigation of the slate deposits of west-central Arkansas but also the mapping of the rocks in the mountainous part of the Caddo Gap quadrangle. In that year A. H. Purdue, State geologist of Arkansas, had charge of the work and was assisted by R. D. Mesler and H. D. Miser. All the subsequent work in the Caddo Gap quadrangle, as well as all in the De Queen quadrangle, was done by the United States Geological Survey. The work since 1907 is briefly outlined below. In 1908 Mr. Purdue, assisted by Mr. Miser, completed the mapping of the rocks of the Caddo Gap quadrangle with the aid of valuable suggestions from C. W. Hayes, chief geologist, J. A. Taff, and E. O. Ulrich, who visited the field for several days. In 1910 Mr. Purdue, assisted by Mr. Miser, reviewed a part of the previous work in the Caddo Gap quadrangle and mapped the rocks in most of the mountainous portion of the De Queen quadrangle. In 1911 these geologists did additional work in both the De Queen and Caddo Gap quadrangles, and in 1912 Mr. Miser, assisted by Mr. Mesler, completed the mapping of the rocks in the De Queen quadrangle and then reviewed some of the earlier work in the Caddo Gap quadrangle. In 1913 Arthur Keith, and Messrs. Purdue and Miser spent several days in a field conference in the Caddo Gap quadrangle. During the conference the first identifiable fossils in the Blaylock sandstone, of Silurian age, were discovered. In 1914 Mr. Miser obtained a small collection of fossil plants from the Stanley shale near Gillham, Ark., also the first fossils from the Arkansas novaculite. In 1916 he made a special study of some of the mineral deposits of the quadrangles, including the deposits of diamonds, manganese ore, gravel, and asphalt, and in 1917 he revisited the diamond mines. An investigation of the volcanic ash and tuff in the "Bingen formation," of Upper Cretaceous age, in the Caddo Gap quadrangle and adjoining areas to the south and southwest was made in 1923 by Clarence S. Ross and Mr. Miser. Also in that year other fossil plants were collected from the Stanley shale at the earlier discovered locality near Gillham by Mr. Miser. (See pl. 9, A .) The aggregate time spent in collecting fossils at this locality was eight days, so scare are the fossils and so difficult are the conditions for collecting them. Besides the above work the authors made frequent reconnaissance studies of adjoining areas, and Mr. Miser was joined in 1923 by C. W. Honess for a field conference of a few days in the De Queen and Caddo Gap quadrangles. In 1925 Mr. Miser joined in the field Messrs. L. W. Stephenson and C. H. Dane for a few days in a study of the " Bingen " (Woodbine and Tokio) and other formations of Upper Cretaceous age in and near the Caddo Gap quadrangle. Mr. Dane was making at that time a special study of the deposits of Upper Cretaceous age in southwestern Arkansas under a cooperative agreement between the United States Geological Survey and the Arkansas Geological Survey. For some of the information on the Tokio formation the present writers are indebted to Mr. Dane.

Arkansas, Oklahoma↗
USGS2014

U.S. Geological Survey unconventional petroleum systems research in south Mississippi: Observations on burial history and thermal maturity in the Cretaceous

Shale hydrocarbon ‘resource’ plays have revolutionized the United States energy mix over the last 5 years. These plays are diverse in lithology and age but share the common feature of occurring in ‘tight’ formations which require hydraulic (hydro-) fracturing for economic flow rates. In general, economic success requires an organic-rich reservoir with a quartz- or carbonate-rich mineralogy that responds to artificial stimulation by fracturing. The U.S. Geological Survey (USGS) is tasked with estimating the quantity and quality of undiscovered hydrocarbons reservoired in shales. In support of that mission, we began an investigation of unconventional petroleum systems in the southern part of the Mississippi Salt Basin in 2012, building on earlier reconnaissance work that identified this area as potentially prospective for ‘shale’ gas (Enomoto et al., 2012). While our recent studies (Valentine et al., 2014a; Hackley et al., 2014) have suggested poor ‘shale’ gas prospectivity (due to low organic content, low porosity, high clay content, and significant depth), at least for the Aptian section, they also have generated a wealth of new information about thermal maturity in the Cretaceous of south Mississippi. In addition, our work to-date has set the stage for future USGS evaluation of unconventional hydrocarbons reservoired in the Upper Cretaceous Tuscaloosa Marine Shale (TMS). Here, we summarize recent USGS thermal maturity studies in the south Mississippi Salt Basin.

Mississippi↗
USGS2004

Incorporating uncertainty into mercury-offset decisions with a probabilistic network for National Pollutant Discharge Elimination System permit holders: An interim report

This interim report describes an alternative approach for evaluating the efficacy of using mercury (Hg) offsets to improve water quality. Hg-offset programs may allow dischargers facing higher-pollution control costs to meet their regulatory obligations by making more cost effective pollutant-reduction decisions. Efficient Hg management requires methods to translate that science and economics into a regulatory decision framework. This report documents the work in progress by the U.S. Geological Survey’s Western Geographic Science Center in collaboration with Stanford University toward developing this decision framework to help managers, regulators, and other stakeholders decide whether offsets can cost effectively meet the Hg total maximum daily load (TMDL) requirements in the Sacramento River watershed. Two key approaches being considered are: (1) a probabilistic approach that explicitly incorporates scientific uncertainty, cost information, and value judgments; and (2) a quantitative approach that captures uncertainty in testing the feasibility of Hg offsets. Current fate and transport-process models commonly attempt to predict chemical transformations and transport pathways deterministically. However, the physical, chemical, and biologic processes controlling the fate and transport of Hg in aquatic environments are complex and poorly understood. Deterministic models of Hg environmental behavior contain large uncertainties, reflecting this lack of understanding. The uncertainty in these underlying physical processes may produce similarly large uncertainties in the decisionmaking process. However, decisions about control strategies are still being made despite the large uncertainties in current Hg loadings, the relations between total Hg (HgT) loading and methylmercury (MeHg) formation, and the relations between control efforts and Hg content in fish. The research presented here focuses on an alternative analytical approach to the current use of safety factors and deterministic methods for Hg TMDL decision support, one that is fully compatible with an adaptive management approach. This alternative approach uses empirical data and informed judgment to provide a scientific and technical basis for helping National Pollutant Discharge Elimination System (NPDES) permit holders make management decisions. An Hg-offset system would be an option if a wastewater-treatment plant could not achieve NPDES permit requirements for HgT reduction. We develop a probabilistic decision-analytical model consisting of three submodels for HgT loading, MeHg, and cost mitigation within a Bayesian network that integrates information of varying rigor and detail into a simple model of a complex system. Hg processes are identified and quantified by using a combination of historical data, statistical models, and expert judgment. Such an integrated approach to uncertainty analysis allows easy updating of prediction and inference when observations of model variables are made. We demonstrate our approach with data from the Cache Creek watershed (a subbasin of the Sacramento River watershed). The empirical models used to generate the needed probability distributions are based on the same empirical models currently being used by the Central Valley Regional Water Quality Control Cache Creek Hg TMDL working group. The significant difference is that input uncertainty and error are explicitly included in the model and propagated throughout its algorithms. This work demonstrates how to integrate uncertainty into the complex and highly uncertain Hg TMDL decisionmaking process. The various sources of uncertainty are propagated as decision risk that allows decisionmakers to simultaneously consider uncertainties in remediation/implementation costs while attempting to meet environmental/ecologic targets. We must note that this research is on going. As more data are collected, the HgT and cost-mitigation submodels are updated and the uncertainties may be reduced. Subsequently, the value of using a probabilistic framework for estimating and explicitly stating these uncertainties within a decisionmaking process can be estimated when new data are collected. Future work includes the design and implementation of a Bayesian network decision support system (BN-DSS) to produce mitigation scenarios for offset-project evaluation in the Cache Creek watershed. The decisionmaker, a wastewater-treatment plant, is expected to evaluate potential Hg-offset programs in terms of changes in HgT load changes, MeHg-production potential, project cost, and other suitability criteria. Subsequently, scenarios can be analyzed by performing sensitivity analyses and ranking environmental and economic uncertainties in terms of the decisionmaker’s preferences and risk choices. Such an analysis allows decisionmakers and stakeholders to explore various scenarios and predict the consequences of different stated preferences over outcomes.

Open-File Report↗
USGS2023

City-scale geothermal energy everywhere to support renewable resilience – A transcontinental cooperation

Cities have important and varying incentives to transform their energy sector to all-electric with low carbon emissions. However, they often encounter a number of impediments when attempting to implement such a change. For example, while urban areas have the highest energy demand-density, cities often lack the space for installing additional energy generation and/or long-duration energy storage systems. Cities also have existing environmental issues from energy sources (e.g., pollution from dust, waste heat or noise) that make residents sensitive to energy infrastructure development. Utilizing power from conventional sources, such as natural gas, biomass and hydropower, which usually are distanced from the urban areas, also make cities more vulnerable to supply disruptions. One promising de-carbonizing energy option for cities focuses on their heating and cooling needs, which constitutes around 1/3 of U.S. and 1/2 of European energy consumption (including industrial processes like drying, pasteurization, etc.; Jadun and others, 2017; EU Commission 2022). If heating and cooling loads can be met by geothermal direct-use technologies, then the need for new electric sources can be greatly lessened. Despite the proven efficacy of geothermal energy as a city/community-scale heating and cooling resource, it is currently only a niche resource in the heating and cooling sector, though has significant potential for future growth. Historically, emphasis has been placed on geothermal electricity generation potential that requires higher temperature (greater than 90 °C) resources at drillable depths, but potentially viable areas are geographically limited and typically well removed from urban centers. Key drivers for investments were represented by greater political interest in renewable electricity production, higher revenues and less effort in distributing the produced energy via grids. In contrast, low-temperature (less than 90 °C) geothermal resources can be used directly for heating and cooling almost everywhere and are cost-effective in urban/suburban settings. In addition, the increased prominence of renewable electricity sources, such as wind and solar onto city-scale electric grids, has led to new urgency around questions of energy storage. Underground thermal energy storage (UTES), wherein surplus or waste heat is stored underground for later use, could present a long-duration energy storage solution. From October 2022 through September 2024, a transcontinental consortium consisting of geological surveys, geoscience organizations, industry representatives and universities aims to develop an understanding of the global potential for city-scale geothermal, proposing guidelines to aid in promoting the economic utilization of low temperature geothermal resources. Efforts will focus on providing city managers and other decision makers with the information needed to evaluate and implement suitable city/community-scale geothermal technologies. Funded by the U.S. Geological Survey’s John Wesley Powell Center for Analysis and Synthesis, this interdisciplinary consortium will showcase tools, datasets, and scientific recommendations to accelerate the broader understanding and adoption of renewable energy systems that access geothermal resources. The collaborative research activities include standardization of nomenclatures, resource description and characterization strategies globally. The results from these activities will be combined with a preliminary climate-driven, city-based energy needs related analysis to perform energy supply/demand matching analysis. The identification of city-specific applications that would benefit from the geothermal technologies provides the basis to up-scale city-specific determinations to regional and national assessments of resource estimates. The city-scale geothermal energy research initiative will ultimately provide the synergies and management analysis that can address benefits, environmental impacts, regulatory frameworks, sustainability, and suitability in retrofitted buildings or new as well as existing heating networks.

Conference Paper↗
USGS1990

Multielement extraction system for determining 19 trace elements in gold exploration samples

A multielement extraction system is being used successfully to provide essentially interference-free geochemical analyses to aid in gold exploration. The Methyl isobutyl ketone-Amine synerGistic Iodide Complex (MAGIC) extraction system separates Ag, As, Au, Bi, Cd, Cu, Ga, Hg, In, Mo, Pb, Pd, Pt, Sb, Se, Sn, Te, Tl, and Zn from interfering geological matrices. Quantitative extraction of these elements is accomplished over a broad range of acid normality making it possible to economically determine all 19 elements from a single digestion or leach solution. The resulting organic extracts are amenable to analysis by inductively coupled plasma atomic emission spectroscopy (ICP-AES) and flame atomic absorption spectroscopy (FAAS). For many years the principal shortcoming of ICP-AES was the complex spectral and stray-light interferences that were caused by the extreme variability of components such as Fe, Na, and Ca in common geological matrices. The MAGIC extraction allows determination of the extracted elements with enhanced sensitivity, from a virtually uniform matrix, by ICP-AES and FAAS. Because of its simultaneous multichannel capabilities, ICP-AES is the ideal instrumental technique for determining these 19 extracted elements. Ultratrace (sub-part-per-billion) determinations of Au and many of the other extracted elements can be made by graphite furnace atomic absorption spectroscopy (GFAAS), following back stripping of the extracts. The combination of the extraction followed by stripping of the organic phase eliminates 99.999% of potential interferences for Au. Gold determination by GFAAS from these extracts under the specified conditions yields a fourfold improvement in sensitivity over conventional GFAAS methods. This sensitivity enhancement and the interference-free matrix allow highly reliable determinations well into the parts-per-trillion range.

Conference Paper↗
USGS1952

Stratigraphic sections of the Phosphoria formation in Idaho, 1947-48, Part I

The Permian Phosphoria formation of the western states contains one of the world's largest reserves of phosphate. Although previous investigations (see especially Mansfield, 1927), including reconnaissance geologic mapping and sampling, established the location of most of the important deposits and their quality of scattered localities, they were not sufficiently detailed to permit a comparison of the merits of individual deposits or an appraisal of the reserves of phosphate rock that might be available under present economic conditions. Because the growing importance of the western phosphate deposits requires a better, more detailed understanding of their distribution and quality, the Geological Survey began in 1947 a comprehensive investigation, including (1) reconnaissance geologic mapping, mostly in Montana, of areas in which the Phosphoria formation could occur but where it had not previously been looked for or found; (2) geologic mapping, mostly in Montana, at a scale no smaller than 1:62,500, of several areas known to contain the Phosphoria formation but not previously mapped except in reconnaissance fashion; (3) geologic and topographic mapping, at a scale of 1:12,000, of some of the richest, thickest, and most accessible deposits; (4) measuring, describing, and sampling all beds of the phosphatic and shaly parts, and in some places the full thickness, of the Phosphoria formation and its stratigraphic equivalents at one or two localities per township over the entire field; (5) chemical and spectrographic analysis of the samples for phosphate, fluorine, minor metals, oil, and rock-forming constituents; and (6) petrologic and geochemical studies of the rocks and minerals of the formation. These studies are designed to define the regional and local geologic structures in which the phosphate bed lie, to provide a basis for the estimation of reserves of the inferred class over the entire region, and to determine the origin of the rocks and the elements contained in them. The data collected are not of the detail required to plan actual mining operations, but it is hoped they will guide industry in the selection of individual deposits worthy of further exploration. Most of the field work contemplated as a part of this investigation is now completed. Although the data will not be compiled or published in final form for some years to come, segments of the data, accompanied by little or no interpretation, will be published as preliminary maps or reports as they are assembled. The present report is the first of a series presenting in abbreviated form the description and analyses of the beds measured and sampled at various localities in southeastern Idaho (pl. 1). Companion reports presenting segments of the data from Montana, Wyoming, and Utah (Swanson and others, 1952, and McKelvey and others, 1952a and 1952b) are being released at the same time as this report, and others are in preparation.

Idaho↗
USGS1998

Economics and the 1995 National Assessment of United States Oil and Gas Resources

This report summarizes the economic component of the 1995 National Assessment of Oil and Gas Resources prepared by the U.S. Geological Survey for onshore and State offshore areas of the United States. Province and regional incremental cost functions for conventional undiscovered oil and gas fields, and selected unconventional oil and gas accumulations, allowing the ranking of areas by the incremental costs finding, developing, and producing these resources. Regional projections of additions to reserves from previously discovered fields to 2015 are also presented.

Circular↗
USGS1987

Uranium resource assessment by the Geological Survey; methodology and plan to update the national resource base

Based on the Memorandum of Understanding {MOU) of September 20, 1984, between the U.S. Geological Survey of the U.S. Department of Interior and the Energy Information Administration {EIA) of the U.S. Department of Energy {DOE), the U.S. Geological Survey began to make estimates of the undiscovered uranium endowment of selected areas of the United States in 1985. A modified NURE {National Uranium Resource Evaluation) method will be used in place of the standard NURE method of the DOE that was used for the national assessment reported in October 1980. The modified method, here named the 'deposit-size-frequency' {DSF) method, is presented for the first time, and calculations by the two methods are compared using an illustrative example based on preliminary estimates for the first area to be evaluated under the MOU. The results demonstrate that the estimate of the endowment using the DSF method is significantly larger and more uncertain than the estimate obtained by the NURE method. We believe that the DSF method produces a more realistic estimate because the principal factor estimated in the endowment equation is disaggregated into more parts and is more closely tied to specific geologic knowledge than by the NURE method. The DSF method consists of modifying the standard NURE estimation equation, U=AxFxTxG, by replacing the factors FxT by a single factor that represents the tonnage for the total number of deposits in all size classes. Use of the DSF method requires that the size frequency of deposits in a known or control area has been established and that the relation of the size-frequency distribution of deposits to probable controlling geologic factors has been determined. Using these relations, the principal scientist {PS) first estimates the number and range of size classes and then, for each size class, estimates the lower limit, most likely value, and upper limit of the numbers of deposits in the favorable area. Once these probable estimates have been refined by elicitation of the PS, they are entered into the DSF equation, and the probability distribution of estimates of undiscovered uranium endowment is calculated using a slight modification of the program by Ford and McLaren (1980). The EIA study of the viability of the domestic uranium industry requires an annual appraisal of the U.S. uranium resource situation. During DOE's NURE Program, which was terminated in 1983, a thorough assessment of the Nation's resources was completed. A comprehensive reevaluation of uranium resource base for the entire United States is not possible for each annual appraisal. A few areas are in need of future study, however, because of new developments in either scientific knowledge, industry exploration, or both. Four geologic environments have been selected for study by the U.S. Geological Survey in the next several years: (1) surficial uranium deposits throughout the conterminous United States, (2) uranium in collapse-breccia pipes in the Grand Canyon region of Arizona, (3) uranium in Tertiary sedimentary rocks of the Northern Great Plains, and (4) uranium in metamorphic rocks of the Piedmont province in the eastern States. In addition to participation in the National uranium resource assessment, the U.S. Geological Survey will take part in activities of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development and those of the International Atomic Energy Agency.

Circular↗
USGS2010

Magmatic sulfide-rich nickel-copper deposits related to picrite and (or) tholeiitic basalt dike-sill complexes: A preliminary deposit model

Magmatic sulfide deposits containing nickel (Ni) and copper (Cu), with or without (±) platinum-group elements (PGEs), account for approximately 60 percent of the world’s Ni production and are active exploration targets in the United States and elsewhere. On the basis of their principal metal production, magmatic sulfide deposits in mafic rocks can be divided into two major types: those that are sulfide-rich, typically with 10 to 90 percent sulfide minerals, and have economic value primarily because of their Ni and Cu contents; and those that are sulfide-poor, typically with 0.5 to 5 percent sulfide minerals, and are exploited principally for PGE. Because the purpose of this deposit model is to facilitate the assessment for undiscovered, potentially economic magmatic Ni-Cu±PGE sulfide deposits in the United States, it addresses only those deposits of economic significance that are likely to occur in the United States on the basis of known geology. Thus, this model focuses on deposits hosted by small- to medium-sized mafic and (or) ultramafic dikes and sills that are related to picrite and tholeiitic basalt magmatic systems generally emplaced in continental settings as a component of large igneous provinces (LIPs). World-class examples (those containing greater than 1 million tons Ni) of this deposit type include deposits at Noril’sk-Talnakh (Russia), Jinchuan (China), Pechenga (Russia), Voisey’s Bay (Canada), and Kabanga (Tanzania). In the United States, this deposit type is represented by the Eagle deposit in northern Michigan, currently under development by Kennecott Minerals.

Open-File Report↗
USGS1982

The economic feasibility of operational earth sensing from space

Earth-sensing satellites designed to follow Landsat involve spatial resolution in the order of 10 to 30 m as compared to the 80 m of the Landsat Multispectral Scanner (MSS). At these higher resolutions such satellites will perform inspection functions of high importance to government agencies and which are beyond the capabilities of the Landsat MSS. There is considerable evidence that nations that cannot afford their own Earth-sensing satellites are willing to pay a suitable price for the capability of inspecting their own land and adjacent sea areas. A unit price of 25 cents per square km per year is suggested as a reasonable fee which would provide economic viability to a well defined satellite system such as the Mapsat defined by the U.S. Geological Survey. This concept and pricing involve only the satellite and its data acquisition and transmission capability. Data reception, processing and distribution would remain a separate function to be implemented on a local or regional basis as is now done.

Open-File Report↗
USGS2025

The National integrated water availability assessment, water years 2010–20

Water availability is fundamentally important to human well-being, economic vitality, and ecosystem health. Because of its central importance, the U.S. Congress tasked the U.S. Geological Survey (USGS) and other Federal agencies with conducting regular, comprehensive assessments of water availability in the United States through the requirements under the SECURE Water Act. In response to this mandate, the USGS has developed the U.S. Geological Survey Integrated Water Availability Assessment—2010–20, which addresses aspects of water supply, quality, and use related to water availability in the United States. This is the first chapter of that report. The major climatic factors affecting water availability are also described. Multiple aspects of water availability are integrated to produce a more comprehensive analysis of water availability in the United States. This chapter enumerates the development, organization, and tools used in the USGS Integrated Water Availability Assessment. SECURE Water Act reports, developed by the Department of Energy Hydropower Climate Change Assessment and the Bureau of Reclamation West-Wide Climate and Hydrology Assessment, are also described. A distilled list of key findings from the overall report is also provided, serving as an introduction to each topic along with the most important high-level information.

conterminous United States↗
USGS2020

Numerical simulation of groundwater availability in central Moloka‘i, Hawai‘i

Since the 1990s, increased chloride concentrations of water pumped from wells (much of which is used for drinking water) and the effects of withdrawals on groundwater-dependent ecosystems have led to concerns over groundwater availability on the island of Molokaʻi, Hawaiʻi. An improved understanding of the hydrologic effects of proposed groundwater withdrawals is needed to ensure effective management of the groundwater resources of Molokaʻi, plan for possible growth, and accommodate cultural, social, and economic concerns. To address the information needs of managers and community stakeholders on Molokaʻi, the U.S. Geological Survey developed a numerical groundwater model capable of simulating salinity change and reduction in groundwater discharge in coastal areas of central and southern Molokaʻi. Estimates of groundwater recharge needed as input to the numerical groundwater model were made using a daily water budget for each decade during 1940−2012 (the period 2000−12 spanned 13 years) and the most current available data, including the distributions of monthly rainfall and potential evapotranspiration. Total island recharge during the decadal periods ranged from a low of about 189 Mgal/d during the 1970s to a high of 278 Mgal/d during the 1960s. These recharge estimates were used to develop an island-wide numerical groundwater model with simplifying assumptions (sharp interface between freshwater and saltwater; two-dimensional flow). The island-wide model provided estimates of groundwater inflows to the main area of interest simulated with a three-dimensional numerical groundwater model. Simulated withdrawal scenarios were selected in consultation with water managers and stakeholders and consisted of: (1) a baseline scenario using average recharge (1978−2007 rainfall and 2010 land cover) and average 2016−17 withdrawals; (2) a scenario using average recharge and withdrawals from existing wells at pending (as of January 2019) water-use permit rates; (3) six scenarios using average recharge and selected withdrawals from existing and proposed wells; and (4) a scenario using reduced recharge and selected withdrawals from existing and proposed wells. Results of the simulated withdrawal scenarios indicate that wells may be capable of producing groundwater with chloride concentrations below 250 mg/L at withdrawal rates exceeding average 2016−17 rates. However, the quality of water withdrawn from production wells is dependent on the rate and distribution of the withdrawals. For all nonbaseline scenarios, simulated groundwater discharge to the nearshore environment is reduced relative to the baseline scenario. Areas of discharge reduction may correspond to areas used for cultural or subsistence purposes. The three-dimensional numerical groundwater model developed for this study utilizes the latest available hydrologic and geologic information and is a useful tool for understanding the hydrologic effects of additional groundwater withdrawals in central Molokaʻi. The model has several limitations, including its nonuniqueness and inability to account for local-scale heterogeneities.

Hawaii↗
USGS1987

UNDERWATER MAPPING USING GLORIA AND MIPS.

Advances in digital image processing of the (GLORIA) Geological Long-Range Induced Asdic) sidescan-sonar image data have made it technically and economically possible to map large areas of the ocean floor including the Exclusive Economic Zone. Software was written to correct both geometric and radiometric distortions that exist in the original raw GLORIA data. A digital mosaicking technique was developed enabling 2 degree by 2 degree quadrangles to be generated.

Conference Paper↗