SEARCH · USGS Science

Results for “North American Journal of Fisheries Management”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 76Linked to original sources

USGS2025

Deterministic physics-based earthquake sequence simulators match empirical ground-motion models and enable extrapolation to data poor regimes: Application to multifault multimechanism ruptures

We use the deterministic earthquake simulator RSQSim to generate complex sequences of ruptures on fault systems used for hazard assessment. We show that the source motions combined with a wave propagation code create surface ground motions that fall within the range of epistemic uncertainties for the Next Generation Attenuation‐West2 set of empirical models. We show the model is well calibrated where there are good data constraints, and has good correspondence in regions with fewer data constraints. We show magnitude, distance, and mechanism dependence all arising naturally from the same underlying friction. The deterministic physics‐based approach provides an opportunity for better understanding the physical origins of ground motions. For example, we find that reduced stress drops in shallow layers relative to constant stress drop with depth lead to peak ground velocities in the near field that better match empirical models. The simulators may also provide better extrapolations into regimes that are poorly empirically constrained by data because physics, rather than surface shaking data parameterizations, is underlying the extrapolations. Having shown the model is credible, we apply it to a problem where observations are lacking. We examine the case of crustal faults above a shallow subduction interface seen to break coseismically in simulations of the New Zealand fault system. These types of events were left out of consideration in the most recent New Zealand national seismic hazard model due to the modeling complexity and lack of observational data to constrain ground‐motion models (GMMs). Here, we show that in the model, by breaking up the coseismic crustal and interface rupturing fault motions into two separate subevents, and then recombining the resulting ground‐motion measures in a square‐root‐of‐sum‐of‐squares incoherent manner, we reproduce well the ground‐motion measures from the full event rupture. This provides a new method for extrapolating GMMs to more complex multifault ruptures.

Seismological Research Letters↗

USGS2024

Predicting hydrothermal reservoir depth from chemical geothermometers using a three-dimensional temperature model in the Great Basin, USA

Recent work in the Great Basin region of the western United States has made it possible to predict the depth of hydrothermal reservoirs (i.e., the depth at which heat is accumulated prior to ascent via hydrothermal upflow) identified through geochemistry and to contextualize the spatial patterns of these reservoir depths. Chemical geothermometers use the chemical and mineral constituents of hydrothermal fluids to predict the temperature at which fluids equilibrated with the host rocks at depth. Assuming that most of the Great Basin is dominated by conductive conditions until a vertically connected hydrothermal flow path is created (e.g., by faulting), geothermometers reflect the chemical and thermal conditions at the depth interval that the fluid has conductively equilibrated over a long period before a vertical conduit allows convective upflow. By pairing geothermometer temperature estimates with our recent three-dimensional temperature model of conductive heat flow in the Great Basin, we estimate the corresponding reservoir depths and construct a map of circulation depths. The predicted depths from geothermometers have spatial patterns across the Great Basin that relate to patterns seen in other geologic and geophysical data. Deeper springs generally occur disproportionately in areas with higher strain rates and in basins. We posit that current elevated strain rates reflect patterns of historic deformation where ongoing tectonic activity maintains permeable pathways to deeper reservoirs, some of which are estimated to exceed 6 km depth. Basins, as expected, contain a disproportionate number of these deep systems, because the underlying aquifers are closer to the surface in basins, thus requiring less water pressure to reach the surface than in mountain ranges. Most springs estimated to have their source in a deep reservoir occur at places known to host a hydrothermal system; these refined depth estimates of the source reservoir can help to better constrain the source depth for many known hydrothermal systems across the Great Basin.

Arizona, California, Idaho, Nevada, Oregon, Utah↗

USGS2025

Chemical and isotopic fractionation during melt inclusion formation

Melt inclusions are used to study the origin and evolution of magmas. The extent to which they represent equilibrium melt compositions, however, critically hinges on the ratio of crystal growth rate to diffusion rate in melts. If the rate of crystal growth is limited by the supply of nutrients and the dissipation of unwanted components, the trapped melt will be depleted in compatible elements and enriched in incompatible elements. Despite widespread recognition of the potential for melt inclusions to trap disequilibrium compositions, their identification remains a challenge. Here, we demonstrate how stable isotopes provide a solution to this problem. Melt inclusions in basaltic tephra from Kīlauea volcano, Hawai‘i, display Mg isotope fractionation up to 0.49‰ ( 26 Mg/ 24 Mg) relative to bulk rock. These observations indicate that kinetic processes, such as chemical diffusion, are at play, as equilibrium mineral-melt isotope fractionation at high temperatures is an order of magnitude smaller. We propose that the heavy Mg isotopic compositions of the melt inclusions were generated by the faster diffusion and thus preferential incorporation of 24 Mg by the growing olivine, leaving the slower diffusant ( 26 Mg) behind. The incompatible elements (e.g., Ca, Ti, and K) are predicted to display similarly large fractionations when boundary layer effects are significant. These findings show that stable isotopes can be a useful tool in identifying disequilibrium compositions in melt inclusions.

Geology↗

USGS2024

Developments in African industrial minerals for renewable energy

Introduction Africa is emerging as a leading source for minerals used in the manufacture of batteries for electric vehicles and in other renewable energy applications. New graphite, lithium, and rare-earth mines have or could be opened in African countries from 2017 through 2026. Estimates of production capacities for graphite, lithium, and rare-earth mines for 2023 and beyond are based upon supply-side assumptions, such as announced plans for new capacity construction and bankable feasibility studies, as well as projected trends that could affect current producing facilities in 2023 and planned new facilities projected to come online by 2026. Forward-looking information, including estimates of future production capacities, graphite flake distributions, and timing of the start of operations, are subject to risk factors and uncertainties that could cause actual events or results to differ significantly from expected outcomes. Projects listed in this report are presented as an indication of industry plans and are not a U.S. Geological Survey (USGS) prediction of what will take place. Only projects with planned startup dates are included in this report; ther graphite, lithium, and rare-earth projects in Africa without startup dates were known to be in various stages of development but are not included in this fact sheet.

Fact Sheet↗

USGS2024

Mapping karst groundwater flow paths and delineating recharge areas for springs in the Little Sequatchie and Pryor Cove watersheds, Tennessee

The Little Sequatchie River and Pryor Cove Branch, in southern Tennessee, drain the eastern escarpment of the Cumberland Plateau to the Sequatchie River near the southern end of the Sequatchie Valley. The Little Sequatchie River is the largest tributary to the Sequatchie River by drainage area, covering over 120 square miles. The hydrology of the two drainage areas has been largely altered by karst processes, which has caused the majority of the streams to sink at the contact between the Mississippian Pennington Formation and the underlying Mississippian Bangor Limestone. The U.S. Geological Survey, in cooperation with the U.S. Fish and Wildlife Service and Tennessee Department of Environment and Conservation, initiated a study in 2021 to map the karst groundwater pathways in both watersheds in order to delineate recharge areas for several springs. One of these springs, Sequatchie Cave, represents a significant habitat for two Species of Greatest Conservation Need, the Glyphopsyche sequatchie (Sequatchie caddisfly) and the federally endangered Marstonia ogmorhaphe (royal marstonia). Springs and springflow-dominated streams in the Little Sequatchie River valley and Pryor Cove also provide water for agricultural practices and serve as a drinking water source for nearby communities. During the study, a total of 25 dye injections were conducted over eight rounds from January 2022 through March 2023. Dye traces from these injections helped to delineate recharge areas for six major springs, ranging from 7.3 to 65.2 square miles in area. The majority of the dye traces remained subsurface (from sinkpoint to recovery site) for long distances, with karst groundwater travelling nearly 8 miles before resurfacing. The dye traces also had rapid traveltimes, often travelling hundreds to thousands of feet per hour. The goal of this project was to provide scientific data related to karst groundwater pathways and spring recharge areas to aid State and Federal agencies in making informed decisions to protect and preserve this unique and vulnerable karst system.

Tennessee↗

USGS2025

Forecast, monitor, adapt: A multi-agency strategy to protect people from postfire debris flows

In 2020, a wildfire burned across Glenwood Canyon in Colorado, USA. A history of postfire debris flows in the region and a hazard assessment for the burn area indicated that potentially life-threatening debris flows could be triggered by rainfall within months of a wildfire. As a result, four government agencies evaluated strategies to help mitigate hazards, including the loss of human life, that may be associated with debris-flow events. After the fire, 26 large debris flows occurred in the summer of 2021 and three sediment-laden flows occurred in the summer of 2023, but there were no major injuries or fatalities reported. We found that integrating hazard assessment/ forecasting, monitoring, and adaptation scenarios was a successful strategy for reducing postfire debris-flow risks to human life (including injuries and fatalities). Weather forecasts and estimates of debris-flow triggering rainfall thresholds, likelihood, and volume were used to anticipate the timing, location, and magnitude of debris-flow events. Rainfall monitoring and detailed recordkeeping of storms that triggered debris flows were used to validate and update debris-flow warning thresholds that varied with time following the wildfire. Although the governmental agencies working in this burn area had distinct and differing agency mandates, they were able to integrate information to reduce the risk of debris-flow events to human life.

Colorado↗

USGS2000

Suspended-sediment characteristics in the Housatonic River Basin, western Massachusetts and parts of eastern New York and northwestern Connecticut, 1994-96

Suspended-sediment concentrations, discharges, loads, and yields were determined for eight subbasins in the Housatonic River Basin in western Massachusetts, eastern New York, and northwestern Connecticut from April 1994 through March 1996. Suspended-sediment samples were collected at three continuous-record sediment stations and at four partial-record sediment stations. Suspended-sediment concentrations in samples collected during the period of study ranged from less than 0.5 to 3,400 milligrams per liter, and concurrent streamflows ranged from 0.03 to 126 cubic feet per second per square mile at the seven stations. Median suspended-sediment concentrations in samples collected at each station ranged from 7 to 61 milligrams per liter. Median streamflows during suspended-sediment sampling ranged from 1.86 to 5.88 cubic feet per second per square mile. Instantaneous suspended-sediment yields ranged from less than 0.005 to 185 tons per day per square mile, and medians ranged from 0.03 to 1.12 tons per day per square mile at the seven stations. Total suspended-sediment loads (mass) from April 1994 through March 1996 at the continuous-record sediment stations were 11,603 tons at Housatonic River near Great Barrington, 7,929 tons at Green River, and 54,347 tons at Housatonic River near Ashley Falls. Suspended-sediment load during January 1996 at the Green River station accounted for about 54 percent of the total suspended-sediment load for the Green River during the 2-year study. Suspended-sediment load on January 19 and 20, 1996, at the Green River station accounted for about 50 percent of the January 1996 suspended-sediment load, or about 27 percent of the total suspended-sediment load during the 2-year study. This large suspended-sediment transport was the result of rainfall and snowmelt on January 19 and 20, 1996--the equivalent of a 5- to 6-inch rain storm in the Green River subbasin. Total suspended-sediment loads during the 2-year study at the partial-record sediment stations were 3,052 tons at Williams River, 1,758 tons at Ironworks Brook, and 17,927 tons at Konkapot River. Suspended-sediment yields from April 1994 through March 1996 at the continuous-record sediment stations were 21 (tons/yr)/mi 2 at Housatonic River near Great Barrington, 78 (tons/yr)/mi 2 at Green River, and 58 (tons/yr)/mi 2 at Housatonic River near Ashley Falls. Suspended-sediment yields during the 2- year study at the partial-record sediment stations were 35 (tons/yr)/mi 2 at Williams River, 78 (tons/yr)/mi 2 at Ironworks Brook, and 147 (tons/yr)/mi 2 at Konkapot River. Suspended-sediment yields were estimated for two subbasins in the Housatonic River Basin--Schenob Brook at Sheffield, a partial-record sediment station, and the area adjacent to the Housatonic River between Great Barrington and Ashley Falls. The estimate of suspended-sediment yield at Schenob Brook at Sheffield of 82 (tons/yr)/mi 2 is comparable to the yield determined for the Green River and Ironworks Brook. The estimate of suspended-sediment yield for the area adjacent to the Housatonic River between Great Barrington and Ashley Falls was 395 (tons/yr)/mi 2 . This estimated suspended-sediment yield was 2.7 to 18.8 times greater than that estimated for any of the other subbasins. Several basin and land-use characteristics thought to affect suspended-sediment transport in the subbasins were compared to the suspended-sediment yields. The characteristics that seemed to affect suspended-sediment discharge were dams, which contributes to decreased yields; Hadley, Limerick, Linlithgo, Saco, and Winooski silt loam soils (high erodibility soils), which contributes to increased yields; stratified-drift deposits, which contributes to increased yields; and agricultural and open land, which contributes to increased yields. The effect of stratified-drift deposits on suspended-sediment discharge is thought to be greater when those deposits are of glaciolacustrine (generally clay, silt, and fine sand), rather than glaciofluvial (clay, silt, sand, gravel, and cobbles) origin. The silt loam soils, glaciolacustrine deposits, and agricultural and open land are interrelated, inasmuch as the silt loam soils generally are associated with glaciolacustrine deposits and agricultural activities.

Connecticut, Massachusetts, New York↗

USGS1989

Techniques for simulating flood hydrographs and estimating flood volumes for ungaged basins in east and west Tennessee

A dimensionless hydrograph developed for a variety of basin conditions in Georgia was tested for its applicability to streams in East and West Tennessee by comparing it to a similar dimensionless hydrograph developed for streams in East and West Tennessee. Hydrographs of observed discharge at 83 streams in East Tennessee and 38 in West Tennessee were used in the study. Statistical analyses were performed by comparing simulated (or computed) hydrographs, derived by application of the Georgia dimensionless hydrograph, and dimensionless hydrographs developed from Tennessee data, with the observed hydrographs at 50 and 75% of their peak-flow widths. Results of the tests indicate that the Georgia dimensionless hydrography is virtually the same as the one developed for streams in East Tennessee, but that it is different from the dimensionless hydrograph developed for streams in West Tennessee. Because of the extensive testing of the Georgia dimensionless hydrograph, it was determined to be applicable for East Tennessee, whereas the dimensionless hydrograph developed from data on streams in West Tennessee was determined to be applicable in West Tennessee. As part of the dimensionless hydrograph development, an average lagtime in hours for each study basin, and the volume in inches of flood runoff for each flood event were computed. By use of multiple-regression analysis, equations were developed that relate basin lagtime to drainage area size, basin length, and percent impervious area. Similarly, flood volumes were related to drainage area size, peak discharge, and basin lagtime. These equations, along with the appropriate dimensionless hydrograph, can be used to estimate a typical (average) flood hydrograph and volume for recurrence-intervals up to 100 years at any ungaged site draining less than 50 sq mi in East and West Tennessee.

Tennessee↗

USGS2025

Factors influencing landslide occurrence in low-relief formerly glaciated landscapes: Landslide inventory and susceptibility analysis in Minnesota, USA

In landscapes recently impacted by continental glaciation, landslides may occur where topographic relief has been generated by the drainage of glacial lakes and ensuing post-glacial fluvial network development into unconsolidated glacially derived sediments and exhumed bedrock. To investigate linkages among environmental variables, post-glacial landscape development, and landslides, we created a landslide inventory of nearly 10,000 landslides in five regions of the formerly glaciated low-relief state of Minnesota, USA. Multivariate logistic regression indicates the importance of slope angle, lithology, and the development of stream valleys to landslide distribution. Areas underlain by fine-grained glaciolacustrine and nearshore deposits that are incised by streams are particularly prone to shallow (<1-2 m depth) landslides. Landslides also occur in a wide range of glacial and fluvial deposits, and as rockfall in layered Paleozoic sedimentary rocks in central and southern Minnesota and Precambrian igneous and sedimentary rocks in northeastern Minnesota. Although no more than 1-2% of the studied regions are susceptible to landslides, they can pose risk to life and safety, damage infrastructure, and impact water quality. The combination of recently generated low-relief steep slopes, extensive unconsolidated sediments, and layered sedimentary bedrock make this formerly glaciated landscape more susceptible to landslides than current national-scale models indicate.

Minnesota↗

USGS2026

Preface to the focus section on intraplate earthquakes

More than a half century after plate tectonics provided an overarching framework to explain earthquakes along active plate boundaries, numerous theories have been proposed to explain where, why, and how often earthquakes occur well away from active plate boundaries, but a paradigm remains elusive. Even the classification of earthquakes away from active plate boundaries as "intraplate" raises issues, with potentially important distinctions between Stable Continental Regions and more actively deforming regions including passive margins and failed rifts. Some of the largest known intraplate earthquakes themselves remain enigmatic, having occurred before the modern instrumental era. Hazard assessments are often data-limited: low fault-slip rates relative to landscape modification rates result in poor discoverability of fault sources, challenging the characterization of source zones and earthquake recurrence; the completeness and homogenization of instrumental earthquake catalogs using uncertain magnitude conversions can lead to uncertainties in earthquake recurrence; and, limited strong-motion observations for large-magnitude events at near-source distances leads to uncertainties in the selection and development of ground-motion models for seismic hazard studies. Data from recent intraplate earthquakes around the world—from the moment magnitude M 7.7 2001 Bhuj, India, earthquake 25 years ago to the 2024 M 4.8 Tewksbury, New Jersey earthquake—have yielded both new insights and new questions. The papers in this special focus discuss many of the long-standing challenges involved with intraplate earthquake investigations and provide a snapshot of the state of the art with current research to advance our understanding.

Seismological Research Letters↗

USGS2024

The new self-anchored suspension (SAS) San Francisco Bay Bridge- Its response to a small earthquake

This paper presents a summary of previously published work (Celebi 2023) related to the new Self-Anchored Suspension (SAS) bridge that went into service within the last decade as a replacement for the older truss bridge spanning between Yerba Buena Island and Oakland, California, within the San Francisco Bay Area. During the October 19, 1989 M6.9 Loma Prieta earthquake, which occurred ~100 km south of the Bay Bridge, a section of the upper deck of the truss bridge fell onto the lower deck – thus closing this important lifeline between San Francisco and Oakland. The SAS is unique, self-anchored, and suspended by a single tower that is pivotal in trafficking the cable and hanger system to support the decks. The SAS bridge is extensively instrumented by the California Geological Survey’s Strong Motion Instrumentation Program (CSMIP). There are approximately 85 channels of accelerometers in the seismic monitoring system that recorded the October 14, 2019 Mw4.6 Pleasant Hill earthquake. The data allow a complex but identifiable coupled response of the deck, tower, and cable system. Both acceleration and displacement time-history data are used to extract significant frequencies using system identification methods, including spectral analyses. Results are compared to those from finite-element-model (FEM) analyses carried out during the design and analysis process of the bridge in 2002 (Nader et al. 2002). There are differences between FEM analyses results and those from the low amplitude shaking caused by a seismic event. An apparent frequency (period) of the SAS bridge is assessed (approximately 5.2 seconds). In a plot of deck length versus period, there is an almost linear relationship with periods of other regular suspension bridges, such as the Golden Gate Bridge and the Carquinez Bridge, both in the San Francisco Bay.

California↗

USGS2025

RioM-1: A new calcite reference material for U-Pb LA-ICP-MS geochronology

Determining absolute ages of carbonate diagenesis, faulting, fossil formation, speleothem growth, carbonate-hosted hydrocarbon deposits, vein mineralisation and hydrothermal alteration has become increasingly accessible through LA-ICP-MS U-Pb dating of calcite, complementing traditional isotope dilution methods still applicable to certain materials (e.g., speleothems via micro-drilling). However, well-calibrated reference materials for LA-ICP-MS calcite geochronology remain scarce. Here, we characterise the Rio Maior calcite, designated ‘RioM-1’, as a potential reference material for U-Pb dating by LA-ICP-MS. Fragments (0.1 to 1 cm 3 ) from a single scalenohedral crystal were analysed by ID-TIMS (U-Pb), LA-ICP-MS (U-Pb and 87 Sr/ 86 Sr), and SIMS (O isotopes). RioM-1 displays high U mass fraction and low, though variable, proportions of common Pb. Combined ID-TIMS analyses from two independent laboratories yielded a Tera-Wasserburg lower intercept date of 63.93 ± 0.11 Ma (2 s , MSWD = 1.3, n = 16). LA-ICP-MS U-Pb data from three independent laboratories are concordant with the TIMS age, producing a pooled date of 64.10 ± 0.12/1.2 Ma (2 s , MSWD = 7.7, n = 708) and an initial 207 Pb/ 206 Pb ratio of 0.85 ± 0.01. Other calcite reference materials, when normalised to RioM-1, yielded dates within uncertainty of their published values. SIMS measurements returned a mean 18 O/ 16 O of 0.002044450 ± 181 (1 s ) and δ 18 O SMOW of 19.57 ± 0.92‰ (1 s ), while LA-ICP-MS strontium isotope measurement yielded a mean 87 Sr/ 86 Sr of 0.708177 ± 9 (2 s ).

Geostandards and Geoanalytical Research↗

USGS2024

Volcanic gas monitoring

Introduction As magma rises through the crust, decreasing pressure conditions allow volatiles to exsolve from the magma. These volatiles then migrate upward through the crust, where they can be stored at shallower levels or escape to the atmosphere. Rising magma also heats rock masses beneath volcanic centers, causing water in shallow aquifers and hydrothermal systems to boil and release additional gases and steam (see chapter F , this volume; Ingebritsen and Hurwitz, 2024). The chemistry and quantity of gases that reach the surface during periods of quiescence or volcanic unrest can reveal that gas-rich magma is ascending, crystallizing, or alternatively stalling, with important implications for volcanic hazard (for example, Sutton and others, 1992; Aiuppa and others, 2007, 2021; Werner and others, 2009, 2011, 2012; Moretti and others, 2013; de Moor and others, 2016; Lewicki and others, 2019; Edmonds and others, 2022; Kern and others, 2022; Kunrat and others, 2022). Most volcanoes in Alaska and the western United States are characterized by weak degassing, with one or more low-temperature fumaroles (typically near the local boiling temperature of water) and connect to a deeper and sometimes extensive hydrothermal system (for example, McGee and others, 2001; Symonds and others, 2003a, b). Hydrothermal systems will affect the chemistry of rising gases exsolved from deeper magma (Symonds and others, 2001), including sulfur dioxide (SO 2 ), hydrogen chloride (HCl), and water vapor (for example, Doukas and Gerlach, 1995; Gerlach and others, 1998, 2008; Symonds and others, 2001; Werner and others, 2013). As an example, depending on factors such as temperature, pressure, and oxidation state, rising SO 2 will react with groundwater to form hydrogen sulfide (H 2 S) gas, dissolved sulfate (SO 4 2− ), or elemental sulfur (Christenson, 2000; Symonds and others, 2001; Werner and others, 2008). The reaction and dissolution of SO 2 into shallow groundwater is commonly referred to as scrubbing, and can reduce the likelihood that ascending, degassing magma can be detected. Carbon dioxide, however, in addition to exsolving from magma early in the ascent process, is not easily removed by hydrothermal fluids (Lowenstern, 2001). As scrubbing and other processes take place, the SO 2 /H 2 S, CO 2 /SO 2 , and CO 2 /H 2 S ratios may change. High rates of SO 2 emission indicate that magma has moved to relatively shallow levels in the volcano and that the system has heated up enough to establish dry pathways from depth to the surface. Monitoring multiple gas species and the total output of those species is thereby useful for volcano monitoring during both periods of quiescence, to establish background degassing conditions, and during unrest, when gas geochemistry and emission rates can provide information on changing conditions, such as magma ascent. To provide context for multidisciplinary volcano forecasts, we focus on the following two key required capabilities: (1) characterizing baseline geochemistry and gas discharge from volcanoes and volcanic regions and (2) monitoring changes in gas geochemistry and discharge to inform forecasts of volcanic eruptions and their effects. Sufficient baseline data must be collected to identify and interpret anomalous degassing associated with volcanic unrest (for example, Sorey and others, 1998; Rouwet and others, 2014). Differences in volcano type, baseline degassing rates, local hydrology, and geography (for example, high versus low latitude) will result in a different baseline for each volcano. Volcanoes of any threat level that exhibit one or more degassing phenomena would ideally be monitored by techniques needed to establish baseline degassing data, with the sampling frequency of baseline data dictated by the threat level (table E1). Additional monitoring techniques become necessary during periods of unrest. In general, three of the most important techniques for gas monitoring are (1) direct sampling of fumarole, spring, and soil gases for laboratory geochemical measurements, (2) measurements of the chemical composition of the volcanic plume and emission rates of major gas species (for example, H 2 O, CO 2 , SO 2 , and H 2 S) by satellite, airborne, or ground-based techniques, and (3) measurements of diffuse emissions of CO 2 and other gases through soils. Various methods and instruments may be useful both for baseline studies and during unrest.

Scientific Investigations Report↗

USGS2026

Black rails in Baja California

Summarizing records from 1905 to 2025, we document the presence and distribution of the California black rail ( Laterallus jamaicensis coturniculus ) in northwestern México, particularly Baja California and the Colorado River Delta. This subspecies has a restricted distribution in the western U.S. and northwestern México. We found few records over the past century: sparse detections in the early 1900s and an increase in reported records after 2000. Over 120 years, we compiled 35 documented records of California black rail occurrence in Baja California with a minimum reported count of 56 rails. Our call-broadcast survey methods reconfirmed previously occupied sites and documented the species at a previously unreported site. Surveys in the Baja California portion of the Colorado River Delta yielded 20 detections across nine survey events between 2000 and 2022. In April 2003, standardized surveys detected 12 California black rails: 7 in Bahía de San Quintín, 3 in Arroyo San Telmo, and 2 in Arroyo El Rosario. Our recent survey work (2022–2025) recorded maximum monthly counts of 31 detections at Bahía de San Quintín and 15 detections at Estero de Punta Banda, the latter representing a previously undocumented location for the subspecies. These surveys also yielded the first photographic and acoustic documentation of California black rail in México. The contribution of spatial and temporal data provided by citizen science platforms increased our understanding of the subspecies’ distribution. Enforceable protection of this subspecies’ habitat is needed to safeguard its persistence.

Baja California↗

USGS2024

Streams, springs, and volcanic lakes for volcano monitoring

Introduction Volcanic unrest can trigger appreciable change to surface waters such as streams, springs, and volcanic lakes. Magma degassing produces gases and soluble salts that are absorbed into groundwater that feeds streams and lakes. As magma ascends, the amount of heat and degassing will increase, and so will any related geochemical and thermal signal. Subsurface magma movement can cause pressurization that alters hydrostatic head and may induce groundwater discharge. Fluid-pressure changes have been linked to distal volcano-tectonic earthquakes (White and McCausland, 2016; Coulon and others, 2017) and phreatic eruptions (for example, Yamaoka and others, 2016). Clearly, changes in groundwater and surface waters are both indicators of unrest and clues to how and where magma is rising toward the surface. Where possible, it is prudent to incorporate real-time hydrologic data into multiparameter monitoring of restless volcanoes. Hydrologic dynamics can also be tracked by changes in groundwater levels that are commonly measured in shallow boreholes (see of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume, on boreholes; Hurwitz and Lowenstern, 2024). Although inferred to be common, relatively few volcano-hydrology anomalies are well documented, and many are essentially anecdotal (Newhall and others, 2001), reflecting the fact that high-resolution time series remain rare. Extreme examples include the 2008 eruption of Nevado del Huila, Colombia, where relatively minor phreatomagmatic eruptions were accompanied by expulsion of as much as 300 million cubic meters of groundwater from fissures high on the volcano (Worni and others, 2011), generating large lahars. Substantial decreases in flow rate from springs about 8 kilometers from the summit of Mayon Volcano, Philippines, have been noted before most eruptions in the 20th century (Newhall and others, 2001). Stream monitoring at Redoubt Volcano in 2009 allowed Werner and others (2012) to recognize that groundwater was unable to absorb (or scrub) the high flux of volcanic gas and that a high CO 2 /SO 2 precursor signal had been evident for 5 months prior to the eruption. A key to better interpreting hydrologic anomalies—or even identifying them—is therefore obtaining adequate baseline data. Most hydrologic monitoring at U.S. volcanoes has been accomplished by intermittent sampling surveys with annual or less frequent sampling (for example, https://hotspringchem.wr.usgs.gov/index.php ). More frequent sampling, however, generally is needed to establish reliable baselines. A recent hydrologic and hydrothermal monitoring experiment at 25 sites and 10 of the 12 level 4 (very high threat) volcanoes in the U.S. portion of the Cascade Range demonstrated that there is sufficient temporal variability in hydrothermal fluxes, even during quiescent periods, that one-time measurements will commonly have limited interpretive value (Crankshaw and others, 2018). Thus, surveys are best augmented with data from streamgages (for example, Evans and others, 2004; Bergfeld and others, 2008). Streamflow (water discharge) data allow measured temperature and specific conductance to be converted to heat and solute mass fluxes, which could be insightful parameters for detecting anomalous activity (McCleskey and others, 2012). At the Yellowstone Caldera, long-term monitoring of river solutes has allowed calculation of the chloride flux, a proxy for heat discharge (Hurwitz and others, 2007; McCleskey and others, 2016) from the subsurface magma. This is readily accomplished because data from streamgages are continuously recorded and archived by the U.S. Geological Survey (USGS) National Water Information System (NWIS) (USGS, 2024). Similar studies on stratovolcanoes or shield volcanoes would be scientifically useful, and yet are logistically challenging, requiring streamgages on numerous radial drainages complemented by either frequent manual sampling or numerous deployments of equipment to measure water temperature and specific conductance as a proxy for water chemistry. Another challenge is that some volcanic areas, especially shield volcanoes, are characterized by near-surface porous rocks and soils, such that surface streams are rare and replaced by distant, dilute large-volume springs with only a trace of any original volcanically sourced water (Manga, 2001; Hurwitz and others, 2021). Volcanic lakes are worthy of special attention for monitoring efforts, as their temperature and composition can provide evidence of increased flux of volatile-rich fluids from below. Quantifying changes in volatile and heat release from magma can be simpler in lakes than for volcanoes with radial drainages and no major lakes. Moreover, volcanic lakes pose a range of hazards themselves, including phreatomagmatic eruptions, debris flows, flank collapse, tsunamis, and toxic gas release (Mastin and Witter, 2000; Delmelle and others, 2015; Manville, 2015; Rouwet and others, 2015)—hazards that have historically been responsible for substantial loss of life at many volcanoes worldwide (Manville, 2015). Catastrophic CO 2 release at Lake Nyos, Cameroon, in 1986 suffocated about 1,750 people and about 3,500 livestock and was probably triggered by a large landslide into the gas-saturated lake (Kling and others, 1987; Evans and others, 1993). Gas-charged springs in Soda Bay within Clear Lake (California) have caused almost a dozen deaths to bathers in the past hundred years (ABC News, 2000). A 2005 example of lake overturn and abundant gas release was documented at Mount Chiginagak in Alaska (Schaefer and others, 2008) but did not result in any human casualties. Although thermally stratified lakes, which promote trapping of exsolved magmatic gas, tend to develop in tropical regions, the phenomenon can also arise where salinity creates meromixis (a condition in which a lake does not mix completely), as occurs in Mono Lake, California (Jellison and Melack, 1993; Jellison and others, 1998). If magma erupts or flows into a lake, the interaction between hot magma and cold water can be explosive (Mastin and others, 2004; Zimanowski and others, 2015) and substantially expand the area affected by the eruption. Another hazard is the breaching of crater rims by landslides triggered by volcanic and (or) seismic activity. Under some circumstances, substantial volumes of water can be displaced, leading to large floods and lahars. Late Holocene lake flooding from Aniakchak Crater in the Alaska Peninsula (Waythomas, 2022) and from Paulina Lake in Newberry Crater, Oregon (Chitwood and Jensen, 2000), caused by the failure of outlet sills, testify to the substantial hazards at lake-filled calderas. Several volcanic systems in the United States host lakes known to receive heat and gas from underlying magma. These lakes vary widely in area, depth, and chemical composition. Lakes are present at level 4 volcanoes, including Crater Lake and Newberry Volcano in Oregon; Yellowstone Caldera in Wyoming; Long Valley Caldera, Clear Lake volcanic field, Medicine Lake, and Salton Buttes in California; and Aniakchak Crater, Mount Katmai, Fisher Caldera, Mount Okmok, and Kaguyak Crater, among others, in Alaska. A water lake was present in Halemaʻumaʻu, the crater of Kīlauea, Hawai‘i (fig. F1), from October 2019 to December 2020. Level 3 volcanoes with lakes include Mono Lake volcanic field (Calif.), Mount Bachelor (Ore.), Ukinrek Maars and Mount Chiginagak (Alaska), and Soda Lake (Nevada). In addition, there are lakes at many levels 1 and 2 volcanoes. In the United States, there are no strongly acidic lakes that receive abundant input of magmatic gas, such as those found at Mount Ruapehu (New Zealand), Ijen and Kelud (Indonesia), and Poás (Costa Rica). Nevertheless, many contain fluids that provide clues to magmatic processes below. Since publication of a previous report on recommended instrumentation for volcano monitoring (Moran and others, 2008), continuous hydrologic monitoring has become increasingly feasible. However, changes in water pressure, temperature, and chemistry remain, in general, poorly studied phenomena at volcanoes (Sparks, 2003; National Academies of Sciences, Engineering, and Medicine, 2017). Recent efforts by the USGS have included the temporary study of Cascade Range volcanoes, which included frequent (15 minute to hourly) temporal sampling of temperature, depth, and conductivity (Crankshaw and others, 2018; Ingebritsen and Evans, 2019). At Yellowstone Caldera, many streamgages have now added thermistors and specific conductance sensors, allowing estimation of time-dependent chloride flux as a proxy for variations in subsurface heat flux (McCleskey and others, 2012, 2016). Efforts to better understand lakes have also accelerated, with bathymetric mapping and sampling carried out at several locations in the United States. Especially thorough work was done at Yellowstone Lake thanks to the Hydrothermal Dynamics of Yellowstone Lake (HD-YLAKE, https://hdylake.org ) project, funded primarily by the National Science Foundation. In addition to geophysical surveys and recovery of cores and other samples, HD-YLAKE investigations included remotely operated vehicle (ROV) investigations of hydrothermal vents on the lake floor (fig. F2). Data collected by the ROV provided a better understanding of the thermal and chemical influx from lake-bottom hydrothermal systems (Sohn and others, 2017). In this chapter, we focus on detecting changes in the chemistry, temperature, discharge, or water levels of streams, springs, and lakes that can be caused by seismicity, volumetric strains, or increases in gas flux associated with ascending magma. There is unavoidable overlap with other chapters of this report. Samples of water and gas can also be obtained in boreholes ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume; Hurwitz and Lowenstern, 2024), both shallow and deep. Gas monitoring ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–E, 11 p., https://doi.org/10.3133/sir20245062e.">chapter E , this volume; Lewicki and others, 2024) relies in part on samples from springs and wells, particularly where measurable gas plumes are absent. Water acts as a trigger and lubricant for landslides and sediment-rich floods, and so hydrology has obvious relevance for lahar monitoring, as discussed in of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–H, 6 p., https://doi.org/10.3133/sir20245062h. ">chapter H (this volume; Thelen and others, 2024). Shared situational awareness among scientists engaged in geophysical, gas, and hydrologic monitoring will improve overall understanding of the volcanic hazard.

Scientific Investigations Report↗

USGS2025

Zircon as a pathfinder to REE mineralization

Carbonatites and alkaline silicate rocks are major primary sources of the rare earth elements (REE) and other critical metals, such as Nb. Despite the economic significance of these rocks, their formation and the processes of REE enrichment are poorly understood. Here, statistical analysis of a global dataset demonstrates that zircon geochemistry is a powerful recorder of REE metallogenesis and a potential pathfinder for REE deposits. Zircons from REE and Nb fertile intrusions lack Eu anomalies and have elevated Gd/Yb and Th/Yb, indicating they crystallised from magmas that originated from deep, oxidised and enriched mantle sources. Complexes with Nb enrichment have low U/Nb, reflecting an enriched mantle source, whereas high U/Nb in REE-only fertile intrusions suggest a subduction-metasomatised mantle source. Machine learning models demonstrate high accuracy in classifying zircon from barren and fertile deposits. Classification of detrital zircons shows that REE-enriched deposits correlate with supercontinent assembly, whereas Nb fertile complexes are associated with supercontinent breakup. This approach offers a new, mineral to global scale, petrologic and exploration tool that enhances understanding of REE metallogenesis.

Geochemical Perspectives Letters↗

USGS2024

Post-wildfire debris flows

Post-wildfire debris flows pose severe hazards to communities and infrastructure near and within recently burned mountainous terrain. Intense heat of wildfires changes the runoff characteristics of a watershed by combusting the vegetative canopy, litter, and duff, introducing ash into the soil and creating water repellant soils. Following wildfire, rainfall on bare ground is less able to infiltrate into the fire-altered soils and overland flow is less impeded by vegetation. Rainfall runoff in recently burned areas can erode hillslopes owing to the removal of soil binding organic matter near the soil surface by fire. In channels, loose, dry-ravel deposits composed of sand and gravel are readily entrained by concentrated runoff in channels. Entrainment of soil on hillslopes and in channels bulks up the sediment concentration of the rainfall runoff to generate debris flows capable of transporting boulders and large woody debris. Post-wildfire debris flows can be triggered by rainfall conditions that would typically produce little runoff during unburned conditions. The primary rainfall trigger for post-wildfire debris flows is high intensity rainfall during short duration convective rainstorms or periods of high rainfall intensity embedded within a long-duration frontal storm. Numerous observations of debris flows triggered by storms lasting less than an hour following periods of little to no rainfall indicate that antecedent rainfall is not a requirement for initiation of post-wildfire debris flows. Post-wildfire debris-flow hazard assessment entails estimating probability and magnitude of debris flows in the burned area, estimating debris-flow runout and intensity, and defining rainfall intensity-duration thresholds for debris-flow initiation. In the United States, probability and magnitude is estimated using empirically derived models largely based on data collected in southern California. The models provide maps to identify watersheds and drainage paths where post-wildfire hazards are most pronounced. Rainfall intensity-duration thresholds can be incorporated into flood hazard forecasting tools. Currently, work is underway to identify how to best implement debris-flow runout models in burned areas with efficiency and accuracy. Post-wildfire debris flows have been a long-recognized process in the Transverse Ranges of southern California; however, climate change is driving more frequent wildfires to burn more mountainous terrain throughout the western United States and worldwide. As a result, post-wildfire debris flows are becoming a more common threat in areas where they were once infrequent. As the threat of post-wildfire debris flow expands into new areas, evaluating the hazard becomes challenging because the degree to which wildfire increases debris-flow susceptibility varies from region to region. This chapter summarizes the knowledge to date for evaluating post-wildfire debris-flow susceptibility and hazard assessment. We summarize the characteristics of wildfire burn severity, topography, underlying soil and geology, and rainfall conditions that contribute to making a watershed most likely to produce post-wildfire debris flows. Methods for hazard assessment in the United States and other countries are summarized. We highlight knowledge gaps for how post-wildfire debris-flow susceptibility varies throughout the western United States and worldwide and identify research needs to improve hazard assessment methods in different geographies.

Book chapter↗

USGS2025

Mapping eelgrass (Zostera marina) cover and biomass at Izembek Lagoon, Alaska, using in-situ field data and Sentinel-2 satellite imagery

The U.S. Geological Survey and the U.S. Fish and Wildlife Service have developed a three-tiered strategy for monitoring eelgrass ( Zostera marina ) beds at Izembek Lagoon, Alaska, that targets different spatial and temporal scales. The broadest-scale monitoring (tier-1) uses satellite imagery about every 5 years to delineate the spatial extent of eelgrass beds throughout the lagoon. This report describes the most recent (mid-2020s) tier-1 eelgrass monitoring at Izembek Lagoon. The monitoring effort began by canvasing all satellite imagery collected during summer, under clear daytime skies and at low-tide, since the last tier-1 effort in 2006. Two eelgrass maps of Izembek Lagoon were generated by first creating maps of spectrally unique classes from two Sentinel-2 satellite images collected on July 1, 2016, and August 14, 2020, then attributing those spectral classes with information about eelgrass conditions based on field data. Specifically, maps depicting various eelgrass metrics, such as percentage of cover and modeled biomass, were generated using summaries of the ground data that spatially intersected each spectral class. Comparisons of the 2016 and 2020 Sentinel-2 maps showing eelgrass distributional extent, as well as a 2006 Landsat map, indicated that areas where eelgrass presence may have declined during 2006–20 were most prevalent in the central part of Izembek Lagoon. More recently, during 2016-20, areas of possible biomass decline were more prevalent in the southern part of the lagoon. Monitoring eelgrass conditions at Izembek Lagoon with satellite imagery and concurrent ground data allows conditions to be compared over time, but the influences of tide levels, growing season phenology, and spatiotemporal co-registration accuracy should be considered when designing and interpreting change detection analyses.

Alaska↗