SEARCH · USGS Science

Results for “Journal of Waterway, Port, Coastal, and Ocean Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,722 records · Page 76Linked to original sources

USGS2025

Rebuilding a volcano one lava flow at a time—Visualizing the lava dome-building eruption in the crater of Mount St. Helens, 1982–1986

Between 1980 and 1986, the U.S. Geological Survey made a series of 1:2,000-scale topographic contour maps from aerial photographic surveys to monitor the eruption. These maps were made for operational purposes and were not intended for publication. Since then, advances in technology made it possible to digitize the original, highly detailed hardcopy maps and derive new digital data elevation models of the surface of the lava dome. These digital elevation models allow for the visualization of the progression of the eruption and reveal the rubbly, chaotic surface of the lava flows and dome. Additionally, these new data help fill gaps in the long-term record of topographic changes that have occurred at the volcano since the May 18, 1980, eruption.

Washington↗

USGS1999

Episodic sediment-discharge events in Cascade Springs, southern Black Hills, South Dakota

Cascade Springs is a group of artesian springs in the southern Black Hills, South Dakota, with collective flow of about 19.6 cubic feet per second. Beginning on February 28, 1992, a large discharge of red suspended sediment was observed from two of the six known discharge points. Similar events during 1906-07 and 1969 were documented by local residents and newspaper accounts. Mineralogic and grain-size analyses were performed to identify probable subsurface sources of the sediment. Geochemical modeling was performed to evaluate the geochemical evolution of water discharged from Cascade Springs. Interpretations of results provide a perspective on the role of artesian springs in the regional geohydrologic framework. X-ray diffraction mineralogic analyses of the clay fraction of the suspended sediment were compared to analyses of clay-fraction samples taken from nine geologic units at and stratigraphically below the spring-discharge points. Ongoing development of a subsurface breccia pipe(s) in the upper Minnelusa Formation and/or Opeche Shale was identified as a likely source of the suspended sediment; thus, exposed breccia pipes in lower Hell Canyon were examined. Upper Minnelusa Formation breccia pipes in lower Hell Canyon occur in clusters similar to the discrete discharge points of Cascade Springs. Grain-size analyses showed that breccia masses lack clay fractions and have coarser distributions than the wall rocks, which indicates that the red, fine-grained fractions have been carried out as suspended sediment. These findings support the hypothesis that many breccia pipes were formed as throats of abandoned artesian springs. Geochemical modeling was used to test whether geochemical evolution of ground water is consistent with this hypothesis. The evolution of water at Cascade Springs could not be suitably simulated using only upgradient water from the Minnelusa aquifer. A suitable model involved dissolution of anhydrite accompanied by dedolomitization in the upper Minnelusa Formation, which is caused by upward leakage of relatively fresh water from the Madison aquifer. The anhydrite dissolution and dedolomitization account for the net removal of minerals that would lead to breccia pipe formation by gravitational collapse. Breccia pipes in the lower Minnelusa Formation are uncommon; however, networks of interconnected breccia layers and breccia dikes are common. These networks, along with vertical fractures and faults, are likely pathways for transmitting upward leakage from the Madison aquifer. It is concluded that suspended sediment discharged at Cascade Springs probably results from episodic collapse brecciation that is caused by subsurface dissolution of anhydrite beds and cements of the upper Minnelusa Formation, accompanied by replacement of dolomite by calcite. It is further concluded that many breccia pipes probably are the throats of artesian springs that have been abandoned and exposed by erosion. The locations of artesian spring-discharge points probably have been shifting outwards from the center of the Black Hills uplift, essentially keeping pace with regional erosion over geologic time. Thus, artesian springflow probably is a factor in controlling water levels in the Madison and Minnelusa aquifers, with hydraulic head declining over geologic time, in response to development of new discharge points. Development of breccia pipes as throats of artesian springs would greatly enhance vertical hydraulic conductivity in the immediate vicinity of spring-discharge points. Horizontal hydraulic conductivity in the Minnelusa Formation also may be enhanced by dissolution processes related to upward leakage from the Madison aquifer. Potential processes could include dissolution resulting from leakage in the vicinity of breccia pipes that are abandoned spring throats, active spring discharge, development of subsurface breccias with no visible surface expression or spring discharge, as well as general areal leakage from the Madison aquifer into the Minnelusa Formation.

South Dakota↗

USGS2026

Early Miocene volcanic rocks and associated tectonics, Lava Hills and southern Bristol Mountains, California

Volcanic rocks of latest Oligocene to early Miocene age form an east-west belt across part of the central eastern Mojave Desert from the Whipple Mountains on the east to the Rosamond Hills on the west. We term this the central belt because it is separated from northern and southern belts by swaths with no volcanic rocks. Limited geochronologic data indicate that much of the belt is latest Oligocene and early Miocene in age, about 24 to 19 Ma, a finding that is consistent with these rocks being overlain by the 18.8 Ma Peach Spring Tuff in many places. We describe Miocene geology in a central area of the belt, in the Lava Hills, southern Bristol Mountains, and southern Old Dad Mountains. Sedimentary basins formed coeval with early andesite to rhyolite volcanism, progressing from fluvial and lacustrine tuffaceous sandstone to volcanic lavas, tuffs, and breccias, indicating that early basins formed proximal to volcanic edifices. Higher strata are fluvial and lacustrine with lavas punctuating the sequence. Although basins may partly have been formed within topographic lows bounded by volcanic domes, plateaus, and stratovolcanoes, consistent stratigraphic sections over wide areas indicate that tectonic basin evolution affected broad areas. The volcanic section is capped by local basalt flows and the regional Peach Spring Tuff. Limited data on normal faults support interpretations of early extensional basin development caused by northeast-southwest oriented stretching. Later extension caused stratal rotations, tilting early deposits down to the southwest. This tilted and subsequently beveled basin architecture was overlain by the youngest volcanic deposits, primarily rhyolite and basalt. The Peach Spring Tuff, 18.8 Ma, lies within this upper unit. Similar stratigraphic and structural relations are exposed in the nearby Marble Mountains and Van Winkle Mountain sections, reinforcing that a broad area underwent similar volcanism and tectonism. In our study area the upper unit is only very gently tilted except near dextral strike-slip faults of the eastern California shear zone. These late Miocene to Recent faults are represented as four main fault zones spaced about 5 km apart, representing distributed shear north of the Bristol Lake basin.

California↗

USGS2026

Black rails in Baja California

Summarizing records from 1905 to 2025, we document the presence and distribution of the California black rail ( Laterallus jamaicensis coturniculus ) in northwestern México, particularly Baja California and the Colorado River Delta. This subspecies has a restricted distribution in the western U.S. and northwestern México. We found few records over the past century: sparse detections in the early 1900s and an increase in reported records after 2000. Over 120 years, we compiled 35 documented records of California black rail occurrence in Baja California with a minimum reported count of 56 rails. Our call-broadcast survey methods reconfirmed previously occupied sites and documented the species at a previously unreported site. Surveys in the Baja California portion of the Colorado River Delta yielded 20 detections across nine survey events between 2000 and 2022. In April 2003, standardized surveys detected 12 California black rails: 7 in Bahía de San Quintín, 3 in Arroyo San Telmo, and 2 in Arroyo El Rosario. Our recent survey work (2022–2025) recorded maximum monthly counts of 31 detections at Bahía de San Quintín and 15 detections at Estero de Punta Banda, the latter representing a previously undocumented location for the subspecies. These surveys also yielded the first photographic and acoustic documentation of California black rail in México. The contribution of spatial and temporal data provided by citizen science platforms increased our understanding of the subspecies’ distribution. Enforceable protection of this subspecies’ habitat is needed to safeguard its persistence.

Baja California↗

USGS2026

Rapid characterization of the 2025 Mw 8.8 Kamchatka, Russia earthquake

The 29 July 2025 M w 8.8 Kamchatka, Russia, earthquake was the sixth largest instrumentally recorded earthquake. This event was seismically well observed at regional and teleseismic distances, but publicly available near‐source data were sparse at the time of the event, presenting unique challenges for rapid source and impact characterization. The U.S. Geological Survey (USGS) National Earthquake Information Center provides global real‐time monitoring for earthquakes, including rapid response information products that estimate source characteristics, shaking, and the resulting impacts. We describe the USGS rapid response earthquake information products following the Kamchatka event and discuss their implications for ongoing hazards in the region. We describe potential improvements to our response workflows motivated by this event, including more rapid constraints on source geometries and the automated selection of fault geometries for finite‐fault inversions. The rapid response products together support the interpretation of a unilateral southwestward rupture with significant slip on the southwestern end of the rupture extent. The M w 8.8–9.0 event in 1952, which ruptured a comparable extent of the Kuril–Kamchatka subduction interface, has many similarities to the 2025 rupture. This illustrates that slip deficits may remain following great earthquakes and highlights the usefulness of comparative studies between historic and modern events.

Kuril-Kamchatka subduction zone↗

USGS1976

Diamond drilling at the Ma'milah Mine, Kingdom of Saudi Arabia

The Ma'millah gold mine is about 90 km southeast of At Ta'if at lat 21°03'N., long 41°18'E., in southwestern Saudi Arabia. The deposit, which was worked extensively by ancient miners, consists of several veins and massive lenses of quartz along a regional fault. The extensive ancient mine workings, large size of some quartz outcrops, and significant gold content of several samples indicated that subsurface exploration was warranted. Accordingly, two holes were drilled into the deposit during the interval December 1972 to February 1973. The drill findings were disappointing; the grade of vein material was found to be too low to be of economic interest and the quartz bodies were found to pinch out both along strike and downdip. The drilling program therefore was terminated. The deposit is not worth further exploration

Ma'milah Mine↗

USGS2025

Fluid inclusion constraints on the geometry of the magmatic plumbing system beneath Mauna Loa – Part 2: Xenoliths

Mauna Loa volcano erupts crystal-poor material at its summit and more crystal-rich material on its rift zones. Some of the more olivine-rich lava flows contain xenoliths with diverse mineralogy, including cumulate harzburgites with high-Mg# orthopyroxenes and high-Fo olivines (both > 84). Previous experimental work and thermodynamic modelling has proposed that high-Mg# orthopyroxenes only crystallize from Mauna Loa melts at high pressures (> 6 kbar, > 20 km), leading to suggestions that there is a region of sub-Moho magma storage at Mauna Loa in addition to the geophysically imaged magma reservoir at 2–5 km depth below the summit. We use melt and fluid inclusion barometry combined with thermodynamic models to further investigate this suggestion. Fluid inclusion data from harzburgites and dunitic xenoliths yield storage depths remarkably similar to those found in non-xenolithic crystals from lavas and tephras, with a clear peak at ~ 2–3 km (below the summit). Depths from melt inclusions in these xenoliths overlap with fluid inclusion pressures, ruling out the possibility of fluid inclusion re-equilibration during a period of stalling in a shallower reservoir. We examine five different thermodynamic models and find that the minimum pressure of olivine-orthopyroxene co-saturation varies by ~ 4 kbar (~ 12 km). These models also fail to predict that orthopyroxene is stable in ~ 15–80% of compositionally relevant experimental charges which grew orthopyroxene. Overall, this shows that phase stability modelling is an unreliable method of determining magma storage depth at Mauna Loa. We suggest that model discrepancies reflect a lack of experimental constraints on orthopyroxene stability at > 1200 ℃ and 0.01–5 kbar. Based on the presence of large oikocrystic orthopyroxenes completely enclosing rounded olivine chadacrysts, we suggest that these harzburgitic xenoliths formed through the reaction of intruding melts with olivine mush piles within the Mauna Loa edifice at ~ 3 km depth below the summit, with no need for a deeper storage reservoir. The predominance of pre-eruptive shallow storage means that there is more chance of detecting reservoir destabilization with geophysical monitoring techniques compared to a scenario where melts are supplied from sub-Moho reservoirs.

Hawaii↗

USGS2026

A framework for integrating spatiotemporal deep learning methods with landsat for annual land cover and impervious surface mapping

Land cover information is essential for understanding Earth’s surface dynamics and how vegetation, water, soil, climate, and terrain interact. The National Land Cover Database (NLCD) has been the authoritative source for consistent U.S. land cover mapping. To extend NLCD’s temporal resolution and reduce production latency, we developed the Land Cover Artificial Mapping System (LCAMS)—a prototype spatiotemporal deep learning framework piloted as the foundation for the new Annual NLCD. LCAMS builds on concepts from legacy NLCD and the U.S. Geological Survey Land Change Monitoring, Assessment, and Projection (LCMAP) initiatives. It employs a loosely coupled two-stage architecture consisting of independent but functionally interdependent spatial and temporal models. Spatial models extract per-year information from Landsat data, while the temporal models refine the spatial outputs to enforce inter-annual consistency—critical for reliable land change monitoring. LCAMS produces annual 30 m resolution land cover and impervious surface outputs, with region-specific fine-tuning to generalize across diverse landscapes and temporal dynamics. Validation was conducted using an independent dataset of 1925 randomly sampled plots from five U.S. Landsat Analysis Ready Data (ARD) tiles spanning 1985-2021, selected for spatial and temporal variability. This dataset was used consistently to evaluate LCAMS, Legacy NLCD, and LCMAP. Using the NLCD legend, LCAMS achieved 72.1 ± 1.60% overall agreement, compared to 71.1 ± 1.7% agreement for Legacy NLCD. Using the LCMAP legend, LCAMS achieved 83.4 ± 1.22% agreement, compared to 84.6 ± 1.11% agreement for LCMAP. Overall, LCAMS delivers comparable accuracy while offering higher thematic resolution, longer temporal coverage, and automated production of annual 30 m CONUS land cover.

Remote Sensing of Environment↗

USGS2023

Advancing subsurface investigations beyond the borehole with passive seismic horizontal-to-vertical spectral ratio and electromagnetic geophysical methods at transportation infrastructure sites in New Hampshire

The U.S. Geological Survey (USGS), in cooperation with the New Hampshire Department of Transportation (NHDOT), surveyed transportation infrastructure sites using rapidly deployable geophysical methods to assess benefits added to a comprehensive site characterization with traditional geotechnical techniques. Horizontal-to-vertical spectral-ratio (HVSR) passive-seismic and electromagnetic-induction (EMI) methods were applied at 4 sites including a roadway-stream crossing, roadway-bridge rail-trail crossing, commuter-parking expansion, and a railroad-adjacent river-cutbank slope-failure site. Additionally, ground-penetrating-radar (GPR) was used at the slope-failure site. Typically, subsurface geotechnical properties are determined from boring data; however, borings are often spaced hundreds of feet apart, potentially missing important spatial variability between boreholes. Geotechnical site characterization including geophysical surveys helped provide a more accurate characterization by using continuous or near continuous profiling. Three-component ambient noise measured with HVSR methods were used to determine resonance frequency and estimate sediment thickness. The method works when there is a strong shear-wave acoustic impedance contrast (> 2:1) between sediment and bedrock. Sediment thickness estimates from HVSR measurements were combined with boring data to make detailed maps of the bedrock surface altitude. The bulk electrical conductivity of the subsurface was indirectly measured with EMI methods and was used to identify lithologic variations, shallow bedrock, and conductive groundwater. Ground penetrating radar, which transmits pulses of electromagnetic energy into the subsurface and records the amplitude and timing of reflected signals, was used to identify bedding and changes in lithology or water content. By combining geophysical and boring data analyses, transportation projects produced more spatially comprehensive representations of geotechnical subsurface conditions than would be determined using conventional borings alone.

New Hampshire↗

USGS2026

3D semantic mapping of surface geological features

Semantic mapping in 3D is fundamental to a wide range of geoscientific studies and applications, including geomorphology, hazard assessment, and environmental monitoring. However, automatically segmenting geological features from large-scale photogrammetric datasets remains a significant challenge. We present a methodology to address this gap. Using overlapping images collected over environments of interest, Structure-from-Motion (SfM) produces georeferenced point clouds and estimates camera poses. Existing large vision models, such as Segment Anything Model, segment objects in the images, generating pixel-segmentation associations. To produce pixel-point associations, we project the points back onto the camera image planes. As objects are independently segmented across multiple images with different perspectives, we develop a segmentation mosaicking algorithm to build probabilistic point-segmentation associations that combines the pixel-segmentation associations and pixel-point associations. Our methodology is validated using both synthetic data generated by Kubric and real-world UAV-SfM data. The implementation is designed to be compatible with existing SfM software, including Agisoft and OpenDroneMap, for photogrammetry mapping in geoscience studies. As a case study, we apply our method to the semantic mapping of precariously balanced rocks (PBRs), which provide upper-bound constraints on historical ground motion shaking intensity. To support object-level identification of PBRs, we additionally integrated Grounding DINO, enabling text-prompted segmentation of features of interest within UAV imagery. This case study demonstrates the effectiveness of our method in generating a 3D semantic map of PBRs, enabling spatial distribution of PBR fragility for earthquake hazard analysis.

Computers & Geosciences↗

USGS2025

Accurate simulation of flow through dipping aquifers with MODFLOW 6 using enhanced cell connectivity

In simulations of groundwater flow through dipping aquifers, layers of model cells are often “deformed” to follow the top and bottom elevations of the aquifers. When this approach is used in MODFLOW, adjacent cells within the same model layer are vertically offset from one another, and the standard conductance-based (two-point) formulation for flow between cells does not rigorously account for these offsets. The XT3D multi-point flow formulation in MODFLOW 6 is designed to account for geometric irregularities in the grid, including vertical offsets, and to provide accurate results for both isotropic and anisotropic groundwater flow. A recent study evaluated the performance of the standard formulation and XT3D using a simple, synthetic benchmark model of a steeply dipping aquifer. Although XT3D generally improved the accuracy of flow simulations relative to the standard formulation as expected, neither formulation produced accurate flows in cases that involved large vertical offsets. In this paper, we explain that the inability of XT3D to produce accurate flows in the steeply dipping aquifer benchmark was not due to an inherent limitation of the flow formulation, but rather to the limited cell connectivity inherent in the most commonly used discretization packages in MODFLOW 6. Furthermore, we demonstrate that XT3D is able to produce the expected accuracy when adequate cell connectivity is introduced using MODFLOW's unstructured grid type and the aquifer is discretized vertically using at least two model layers.

Groundwater↗

USGS2026

Cotton farming pesticides affect ileal microbiota activity expressions of virulome but not resistome or metabolic pathways in a sedentary wild passerine

The increased use of agrochemicals to enhance crop production has had detrimental environmental effects including implication in the sharp decline of North American farmland-breeding birds. Here, using a combination of deep shotgun metatranscriptomics and pesticide exposure data, we sought to assess whether exposure to cotton ( Gossypium spp.) production had a differential effect on ileum multi-kingdom microbial activity, metabolism, anti-microbial resistance, and virulence factors of sedentary northern mockingbirds ( Mimus polyglottos ) sampled from two cotton-producing areas (16 birds in total) and one uncultivated area (7 birds) in Texas, USA. Both Shannon Index values (Adj. r 2 = 0.174, F (1,21) = 5.633, p = 0.027) and a Mantel test (Spearman ρ = 0.184, p = 0.013) supported a relationship between metabolically active microbiota Bray–Curtis dissimilarities and differences in pesticide mixtures among study areas. Virulence factor richness (Adj. r 2 = 0.182, F (1,21) = 5.890, p = 0.024), Shannon Index (Adj. r 2 = 0.231, F (1,21) = 7.612, p = 0.012), and load (sum of virulence factor abundances; Adj. r 2 = 0.160, F (1,21) = 5.194, p = 0.033) were related to total pesticide load (total quantity of pesticides). We found no pesticide effects on expression of either antimicrobial resistance genes or metabolic pathways.

Texas↗

USGS2024

Estimating domestic self-supplied water use in Rhode Island, 2014–21

Water withdrawal from private groundwater wells is often unaccounted for in water planning studies, and water from private wells can be a source of exposure to environmental contaminants. The sizes of populations that depend on private wells for domestic water use and the amounts of water that are withdrawn from these wells are generally poorly represented in data collection efforts because of the challenges of locating, metering, or gathering withdrawal information from individual property owners. To address this problem, the U.S. Geological Survey, in cooperation with the Rhode Island Water Resources Board, estimated the volume of water withdrawn from domestic self-supply wells and the populations who use them for the State of Rhode Island at a 30-meter pixel spatial resolution and one-month temporal resolution between July 2014 and June 2021. The number of people reliant on domestic self-supply wells has increased in Rhode Island over the study period; however, the statewide estimate of total water withdrawal has not statistically increased. Withdrawals from private wells are largest in the inland areas of the western part of the State, and the towns of Scituate and Charlestown have the highest estimated withdrawals. Statewide monthly withdrawals ranged from 3.987 million gallons per day in March 2018 to 7.767 million gallons per day in September 2016. The median per capita domestic water use rate was 46.0 gallons per capita per day.

Rhode Island↗

USGS2026

Bottom-up characterization of geologic methane emissions in the San Juan Basin in the southwestern USA

Methane is a potent greenhouse gas that plays an important role in atmospheric chemistry and global warming. The current global methane budget has large uncertainties, and a better understanding of the budget would help to guide strategies for reducing anthropogenic emissions to fight climate change. Natural geologic methane emissions are a particularly poorly constrained source, with top-down estimates from 14 C in ice cores suggesting much lower geologic emissions than bottom-up scaling of direct flux measurements. Our study aims to contribute to resolving this discrepancy through improved bottom-up characterization of geologic methane seepage in the San Juan Basin in southwestern Colorado and northwestern New Mexico, USA. We performed 983 new flux chamber measurements in this basin during summer 2022 and winter 2023 field campaigns. Our results, in combination with prior measurements, suggest that natural seepage in the San Juan Basin only occurs on or near the Fruitland coal outcrop. Specifically, our new measurements confirm previous measurements of seepage along the northwestern exposure of the Fruitland outcrop in Colorado (a known hydrodynamic overpressure region) and for the first time, identified seepage locations along the southernmost Fruitland outcrop exposure in New Mexico, in association with a coal cleat and a fault. Overall, seepage along the Fruitland coal outcrop is heterogeneously distributed, with both positive and negative (interpreted as microbial soil sink) methane fluxes. Features that are hypothesized to be predictive of seepage (e.g., faults) were not associated with positive methane fluxes in areas outside of the Fruitland outcrop. Our best estimate for total geologic methane seepage in the San Juan Basin from spatial interpolation and statistical upscaling is approximately 0.14 Tg CH 4 /yr, with a range from 0.029 to 0.48 Tg CH 4 /yr. This best-estimate value is lower than a previous bottom-up estimate from a gridded seepage inventory, but higher than a previous top-down estimate.

Colorado, New Mexico↗

USGS2025

Reply to, “Comment on ‘The 1886 Charleston, South Carolina, earthquake: Relic railroad offset reveals rupture,’ by Roger Bilham and Susan E. Hough”

We welcome this opportunity to respond to Pratt et al. (2024) (hereinafter P24). Bilham and Hough (2023) proposed a “first-cut” elastic deformation model for the 1886 earthquake, a quantitative source model constrained by identified coseismic constraints. A key observation was the measurement of a lateral offset of a railroad line south of Summerville, leading to a model with predominately dextral slip and minor convergence, from which we concluded that active faulting had raised the Penholoway Marine Terrace >6 m since ∼770 ka. P24 questioned these constraints and proposed an alternative rupture model with predominantly reverse slip. This alternative model is neither consistent with coseismic constraints nor with other geophysical data. In a revised model presented here, we recognize that uplift of the Penholoway Terrace is confined to the eastern edge of the terrace, which we conclude results from active folding and tectonic transpression centered on the dextral fault that offset the railroad in 1886.

South Carolina↗

USGS2023

Hidden system identification: Basin modeling as a tool for examining sedimentary geothermal resource potential

Three-dimensional (3D) geologic and temperature models have been developed for the onshore U.S. Gulf Coast. The results from these models identify areas of moderate- to high-temperature (90°-150°C and >150°C; respectively) geothermal resources at depths <6 km. This modeling study addresses the fundamental challenge of predicting where opportune temperature and lithology coincide. Unlike traditional geothermal systems with surface expressions of hydrothermal circulation (e.g., hot springs, fumaroles, sinter), sedimentary geothermal systems (SGS) are generally hidden. Historically, simplified efforts to predict subsurface temperatures in sedimentary basins have focused on linear temperature extrapolation that does not consider the variable thermal properties of different lithologies or lithologic changes with depth (e.g., compaction, lithification). Therefore, the need to understand basin architecture and predict temperatures in 3D within SGS is paramount to identifying geothermal resources and determining economic feasibility. Basin modeling software has long been used to characterize the subsurface conditions of sedimentary basins, including temperature, in the pursuit of finding hydrocarbons. This tool can also be adapted to evaluate the potential of geothermal resources in a sedimentary basin by predicting the confluence of desirable temperatures and reservoir lithologies. In this work, PetroMod basin modeling software was used to create a regional geologic model of the onshore U.S. Gulf Coast, covering over 500,000 km 2 calibrated to temperature data from wells. Inputs include structural surfaces from commercial databases, lithology information derived from published literature, and corrected bottom-hole temperatures (BHT) from over 6,000 wells. The resulting 3D geologic model can be used to predict temperatures throughout the basin. Maps were exported showing the depth, depositional unit, and reservoir lithology at which temperatures of 90°C and 150°C were reached, revealing over 400,000 km 2 of moderate- to high-temperature resources at depths <6 km. These maps function as a first-order screening tool to identify areas where low-, moderate-, or high-grade resource potential may exist, based on temperature and if optimal reservoir lithologies or depositional units of interest are present. Depending on the success criteria of a project, the same maps can be exported for any isotherm or incorporate other 1407 Gardner and Birdwell subsurface properties. The methodology employed in this work can be applied in any sedimentary basin with available subsurface data. Further calibration incorporating other data, including pressure and porosity, can expand the utility of basin modeling for geothermal evaluations. Basin modeling is a powerful but underutilized tool for identifying prospective geothermal resources in sedimentary basins.

Conference Paper↗

USGS2024

Streamflow depletion caused by groundwater pumping: Fundamental research priorities for management-relevant science

Reductions in streamflow caused by groundwater pumping, known as “streamflow depletion,” link the hydrologic process of stream-aquifer interactions to human modifications of the water cycle. Isolating the impacts of groundwater pumping on streamflow is challenging because other climate and human activities concurrently impact streamflow, making it difficult to separate individual drivers of hydrologic change. In addition, there can be lags between when pumping occurs and when streamflow is affected. However, accurate quantification of streamflow depletion is critical to integrated groundwater and surface water management decision making. Here, we highlight research priorities to help advance fundamental hydrologic science and better serve the decision-making process. Key priorities include (a) linking streamflow depletion to decision-relevant outcomes such as ecosystem function and water users to align with partner needs; (b) enhancing partner trust and applicability of streamflow depletion methods through benchmarking and coupled model development; and (c) improving links between streamflow depletion quantification and decision-making processes. Catalyzing research efforts around the common goal of enhancing our streamflow depletion decision-support capabilities will require disciplinary advances within the water science community and a commitment to transdisciplinary collaboration with diverse water-connected disciplines, professions, governments, organizations, and communities.

Water Resource Research↗

USGS2026

Decoding the oxidative digestion mechanism for polystyrene nanoplastic detection in the Great Lakes using a customizable Raman spectral processing algorithm

Despite the concerns surging around nanoplastics (NPs) regarding their prevalence and bioavailability in freshwater systems, robust detection of NPs in complex environmental matrices is hindered by the lack of standardized sample pretreatment and a mechanistic understanding of oxidative digestion. Here, we systematically investigate the interaction between hydrogen peroxide (H 2 O 2 ) and polystyrene (PS) NPs during digestion in deionized (DI) water and four environmental matrices from in and around the Great Lakes Basin. To facilitate high-throughput analysis, we develop Pre_peak, a customizable Raman spectral processing algorithm that achieves >99% accuracy for both NP identification and interference rejection, allowing reliable NP quantification via pixel counting and systematic decoding of the oxidative digestion mechanisms. In DI water, varying H 2 O 2 doses from 0 to 30% has negligible effects on the recovery and Raman signal intensity of PS NPs over 24 hours of digestion. However, morphological changes and aggregation of PS NPs are observed when the H 2 O 2 dose exceeds 20%. Prolonged digestion further leads to progressive NP loss. In natural waters, the optimal dosage and digestion duration depend on matrix characteristics, including dissolved organic matter (DOM) and ion composition. This study provides mechanistic insights into NP–oxidant interactions and underscores the need for matrix-tailored digestion protocols to advance standardized NP detection in freshwater environments.

Great Lakes↗