USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research - Atmospheres”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76Linked to original sources
USGS2012

Surface coating effects in remote sensing measurements

Measurements of the infrared spectra of a liquid-(water) coated quartz substrate and a solid-(pyrophyllite) coated quartzite are compared to theoretical values. Results demonstrate that in the case of the water-coated quartz, a loss in spectral contrast of the quartz emission occurs at the principal restrahlen wavelengths of 8.5, 9.0, and 12.5 µ but is most pronounced at 12.5 µ. In the case of pyrophyllite-coated quartzite, additional spectral features appear between 8.0 and 10.0 µ as the exposure of quartzite through the pyrophyllite coating is increased. Addition of the pure quartzite and pyrophyllite spectra, weighted by exposed area, is shown to satisfactorily describe the composite spectra.

Journal of Geophysical Research↗
USGS2012

Energy and plane waves in linear viscoelastic media

The mathematical framework for describing plane waves in elastic and linear anelastic media is presented. Theoretical results suggest that the nature of plane waves in anelastic materials is distinctly different from the nature of plane waves in elastic materials. In elastic media the only type of inhomogeneous plane wave ( P or S ) that can propagate is one for which planes of constant phase are perpendicular to planes of constant amplitude. However, in anelastic media this is the only type of inhomogeneous wave that cannot propagate. For an inhomogeneous P or S plane wave the particle motion is elliptical, the velocity is less than that of a corresponding homogeneous wave, the maximum attenuation is greater than that of a corresponding homogeneous wave, and the direction of maximum energy flow is not the direction of phase propagation. Expressions for the energy flux, energy densities, dissipated energy, stored energy, and Q −1 are derived from an explicit energy conservation relation, valid for an arbitrary steady state viscoelastic radiation field. Each energy expression is valid for homogeneous or inhomogeneous P or S plane waves in elastic or linear anelastic media.

Journal of Geophysical Research↗
USGS2012

Geochemistry of thermal waters in Long Valley, Mono County, California

Thermal springs and wells in Long Valley, California, issue sodium bicarbonate‐chloride waters containing 1000–1420 mg/l of dissolved solids. Thermal waters of sodium bicarbonate‐chloride composition are usually associated with hot‐water reservoirs. Chloride concentrations and stable isotope data indicate that the thermal waters have had varied histories. All of the thermal springs issue a mixture of fluid from the thermal reservoir and less saline, cooler water from one or more shallow aquifers. The composition of springs in Hot Creek Gorge may have been further altered by minor subsurface boiling. Thermal springs between Hot Creek and Lake Crowley issue mixtures of fresh and thermal waters which have lost heat by conductive cooling and changed composition by reaction with rock in the shallow aquifer. The silica content of water from Magma Richie 5 and mixing calculations based on the concentrations of silica in thermal waters collected from springs in Hot Creek Gorge and along Little Hot Creek indicate a temperature of at least 200°C in the thermal reservoir. The sodium‐potassium‐calcium geothermometer yields a reservoir temperature estimate near 200°C for most of the thermal springs. If geothermal energy is developed in Long Valley, the high concentrations of arsenic (up to 2.2 mg/l), boron (up to 15 mg/l), and total dissolved solids in the thermal fluids will make it necessary to isolate the effluent of production wells from the freshwater system.

California↗
USGS2012

Preseismic and coseismic deformation associated with the Hollister, California, earthquake of November 28, 1974

The epicenter of the Hollister earthquake ( M L = 5.1) of November 28, 1974, is located near the center of an 81‐line trilateration network which has been surveyed annually since 1971. Five lines in the neighborhood of the epicenter were surveyed just 2 days before the earthquake, and two other lines nearby were surveyed 48 days earlier. Although some of these measurements suggest a possible preearthquake anomaly in line length, the anomaly is within the uncertainty in measurement. A comparison of the most recent preearthquake survey (June 1974) and the most immediate postearthquake survey (December 1974 to January 1975) of the entire network indicates a uniform linear contraction of about 0.8 ppm. This is most reasonably attributed to survey error even though a systematic error of that magnitude is unexpected. We conclude that no demonstrable preseismic or coseismic deformation was detected and suggest that an upper limit for these phenomena is less than 1 ppm in line length. A reasonable dislocation model for the Hollister earthquake yields coseismic changes in line length not greater than a few parts in 10 7 , well below the limit of detection in Geodolite surveys.

California↗
USGS2012

Determination of three‐dimensional velocity anomalies under a seismic array using first P arrival times from local earthquakes: 1. A homogeneous initial model

Geiger's method of locating local earthquakes has been extended to include the effect of P velocity variation along the ray paths in three dimensions. The crustal structure was modeled by rectangular blocks, and a parameter was assigned to each block describing the perturbation of P wave slowness in the block. On the basis of an initial model, a set of linear equations for the observed first P arrival times was formulated in terms of the source and medium parameters. The source parameters for all the earthquakes in the data set and medium parameters for all the blocks penetrated by the seismic rays were then determined simultaneously by the damped least squares method. A computer program has been written for the case of a homogeneous initial medium model with constant P velocity. It has been tested with artificial data and applied to a set of local earthquakes recorded by a dense seismic array in Bear Valley, California. The resultant velocity distribution in the top 5 km shows a narrow low‐velocity zone of about 5 km/s in the San Andreas fault zone sandwiched between high‐velocity regions of about 6 km/s.

California↗
USGS2012

Relocation of local earthquakes by seismic ray tracing

Seismic ray tracing is used to relocate a set of local earthquakes recorded by a dense seismic array in Bear Valley, California. The crustal velocity structure is two-dimensional and incorporates most of the known and inferred velocity differences in the region. Relocated hypocenters fall within the San Andreas fault zone, and P residuals, without elevation or station corrections, now appear to be more internally consistent in the rms sense. Ray takeoff angles and azimuths are distinctly different from those of a uniformly layered earth model. Focal mechanism solutions using only traced data are well determined and have few inconsistent data. Zones of convergence and divergence of rays suggest large variations in observed amplitudes across the local network.

California↗
USGS2012

Heat-flow data and their relation to observed geothermal phenomena near Klamath Falls, Oregon

Two holes were drilled to depths of about 180 m in the Lower Klamath Lake basin south of Klamath Falls, Oregon, to obtain heat flow data and to provide estimates of the thermal conductivity of the valley fill. Twenty-nine thermal conductivity determinations on eight cores give a mean conductivity of 1.82 mcal/cm s °C (0.75 W/m °K). Curvature in the upper 50 m of both terriperature profiles indicates a decrease in surface temperature of about 1.8°C, presumably resulting frorn reclamation of what was marshland in the early part of this century. A surprisingly low heat flow of 0.3 HFU (1 HFU = 10 −6 cal/cm 2 s = 41.8 mW/m 2 ) was measured at site LS near the center of the basin. At site OC-1, 7 km east of LS and 2 km from the Klamath Hills geothermal zone, the heat flow was 1.44 HFU, also a low value in this setting. Temperature profiles in 15 unused water wells in the area had linear gradients ranging from 47° to 170°C/km. The corresponding lower limits of heat flow (conductivities measured at the two heat flow sites being used) range from 0.8 to 3.1 HFU. These variations in heat flow evidently are caused by temperature variations in a convecting system within the near-surface volcanic rocks and do not provide firm constraints on the nature of heat sources at depth.

Journal of Geophysical Research↗
USGS2012

Strain accumulation on the San Andreas Fault near Palmdale, California

Precise distance measurements of a 10×25 km 15‐station trilateration network that spans the San Andreas fault west of Palmdale, California, have been repeated annually in the period 1971–1975. The network appears to be deforming under simple uniform tensor shear of about 0.21±0.03 μstrain/yr with the direction of maximum right‐lateral shear parallel to the local strike of the San Andreas fault. Comparison of trilateration with triangulation surveys of the same network shows that the rate of strain accumulation has been constant over the past 40 yr. The strain accumulation can be explained by conventional dislocation models (i.e., slip at depth beneath a locked section) of the San Andreas fault with 30‐ to 50‐mm/yr slip. Leveling surveys along a 16‐km line that crosses the fault at Palmdale indicate significant changes in tilt but with frequent reversals, so that no net tilt has accumulated in the overall period 1935–1975.

California↗
USGS2012

Implications of a magnetic model of the Long Valley caldera, California

A quantitative magnetic model of Long Valley, California, shows that the magnetic field above this caldera is dominated by intracaldera Bishop tuff, part of the ash flow tuff whose eruption precipitated the caldera collapse. We propose that about half of the 350 km 3 of intracaldera Bishop tuff, or that part beneath the resurgent dome, has been subjected to extensive hydrothermal alteration. The heat that produced this alteration is apparently associated with the residual magma chamber, and much of the formation may still be hot (>200°C). The magnetic minerals in the remaining intracaldera Bishop tuff have not been drastically altered, presumably because the tuff was not heated sufficiently. As a result, the tuff may not be very hot today. The model also reveals the existence of parts of two large precaldera mountains beneath the caldera fill. The resolving power attained in this investigation was possible because we were dealing with large, magnetically distinct lithologic units and a large amount of geological and geophysical data were available constraints to produce the solution.

California↗
USGS2012

Paleomagnetism of welded tuffs of the Yellowstone group

Two of the three ash flow tuffs of the Yellowstone Group are stably magnetized throughout their extent: the Lava Creek tuff (0.60 m.y.) in a normal direction and the Mesa Falls tuff (1.22 m.y.) in a reversed direction. In contrast, much of the Huckleberry Ridge tuff, which was erupted during a polarity transition or field excursion 1.92 m.y. ago and initially magnetized in an intermediate direction ( D = 214.5°, I = −2.2°, and α 95 = 4.1°), has been partially remagnetized in a normal field. Much of the overprint of the Huckleberry Ridge tuff is carried in low‐temperature oxidation products with low coercivities and low blocking temperatures, so that it is commonly removed in peak alternating fields less than 200 Oe or at temperatures less than 400°C. Hematite, having higher coercivities and blocking temperatures, is partly responsible for remagnetization in some specimens, but neither alternating field nor thermal demagnetization enables recovery of the original thermal remanent magnetization in these samples. The chemical overprinting is most pronounced in the devitrified tuff of the flow interior. Stable magnetization is observed in the Huckleberry Ridge tuff in the less porous densely welded portions at the base and boundaries of partial cooling units and in the tuff of the distal margins, where groundwater influences were minimal. Paleomagnetic directions of chilled margins within compound cooling units of the Lava Creek and Huckleberry Ridge tuffs support geological evidence that eruption of each ash flow sheet was rapid and that the source calderas were formed during a short period of time.

Idaho, Montana, Wyoming↗
USGS2012

Paleomagnetic results from the Lassiter Coast, Antarctica, and a test for oroclinal bending of the Antarctic Peninsula

Paleomagnetic results from 17 magnetically stable units of Upper Cretaceous (‘Andean’) plutons and dikes of the Lassiter Coast, on the southern Antarctic Peninsula, define a mean paleomagnetic pole at 87°S, 131°W (α 95 = 11.5°). This indicates that little latitudinal movement of the southern Antarctic Peninsula has occurred during the past 100 m.y. All magnetically stable intrusives are normally polarized and are believed to have been emplaced during the Late Cretaceous epoch of predominantly normal polarity. There is no evidence of postemplacement remagnetization. The uncertainty in declination at the 95% confidence level is computed for both the Lassiter Coast data and those data available from other Andean sites in the Antarctic Peninsula. Within the limits of uncertainty, data from four localities north of 68°S support the contention of Dalziel et al. (1973) that there has not been any apparent post‐Late‐Cretaceous oroclinal bending in the northern half of the peninsula. For sites to the south in the Lassiter Coast, the uncertainty in declination, due to steep inclinations, is too large to support reliably or deny any large‐scale structural bending.

Antarctic Peninsula, Lassiter Coast↗
USGS2012

Geodimeter measurements of strain during the Southern California Uplift

A review of geodimeter measurements made along the ‘big‐bend’ section of the San Andreas fault in southern California indicates no significant increment in strain during the period of major uplift (late 1959 to mid‐1963). Specifically, no evidence of an increment in compressional strain normal to the San Andreas fault at the time of the uplift was found. Geodolite measurements at four networks along the big bend independently indicate that the strain rate during the 1974–1977 episode of subsidence was essentially a uniaxial north‐south compression at the rate of about ⅓ μstrain/yr. Whether the 1974–1977 rate is significantly different from earlier rates determined by triangulation is not clear owing to a rather large variability in the earlier determinations.

California↗
USGS2012

Revised geomagnetic polarity time scale for the interval 0–5 m.y. B.P.

A change in the constants used in K‐Ar dating and a significant increase in new data have made a recompilation and recomputation of data used to define the Late Cenozoic K‐Ar polarity time scale highly desirable at this time. All available data in the range 0–5 m.y. have been recalculated using the refined constants, with 354 data points in this time interval now meeting the minimum criteria for acceptability. Recalculation of the major polarity epoch boundaries has yielded ages of 0.73 m.y. for the Brunhes‐Matuyama, 2.48 m.y. for the Matuyama‐Gauss, and 3.40 m.y. for the Gauss‐Gilbert boundaries. A revised polarity time scale has been constructed based on available K‐Ar data and information obtained from marine magnetic anomalies and deep‐sea sedimentary cores.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Deformation across the Salton Trough, California, 1973-1977

A trilateration network extending across the San Andreas, San Jacinto, and Elsinore faults in the vicinity of the Salton Sea, California, has been surveyed to very high precision several times in the 5‐year interval 1973–1977. The average strain across the entire network is essentially a uniaxial north‐south contraction at the rate of about 0.3 μstrain/a. There is no substantial strain perpendicular to the Salton trough, indicating no tendency to either open or close that rift. The observed uniaxial north‐south contraction differs from a pure shear parallel to the major faults by a uniform dilatation of about −0.25 μstrain/a that is only partly explained. The shear strain across the network reaches a maximum near the San Jacinto fault and could be explained by right lateral slip at depth on that fault. The displacement pattern also suggests right lateral slip at depth on the San Jacinto fault with total right lateral relative movement near 50 mm/a across the 120‐km breadth of the network. The deformation appears to be uniform in time in the 1973–1977 interval. A dislocation model of the deformation suggests about 50±15 mm/a of relative right lateral slip at depth distributed between the San Andreas, San Jacinto, and Elsinore faults and demonstrates that a significant average dilatation can be generated by pure strike slip on several subparallel faults.

California↗
USGS2012

Comparison of the TRM of the Yellowstone Group and the DRM of some Pearlette ash beds

Air fall ash beds (Pearlette) originating from rhyolitic eruptions in the Yellowstone‐Island Park region of Wyoming and Idaho are discontinuous but widespread throughout the western United States. Accumulation and deposition of ashes occurred in low‐energy fluvial and lacustrine environments. These ash beds have been correlated, according to their chemistry and remanent magnetism, with specific eruptions of tuffs of the Pleistocene Yellowstone Group. Type O Pearlette ash beds are normally magnetized and correlate with the Lava Creek Tuff (0.60 m.y.), whereas type S Pearlette ash beds are reversely magnetized and correlate with the Mesa Falls Tuff (1.22 m.y.). The mean direction of detrital remanent magnetization (DRM) of 11 type O Pearlette ash beds is identical to the mean direction of thermal remanent magnetization (TRM) of the Lava Creek Tuff after correcting for differences in site latitude and longitude. Considered separately, only 2 of the 13 Pearlette ash beds studied possess mean inclinations significantly shallower than, and only 4 have mean declinations significantly different from, those of their correlative tuffs. Identical directions of magnetization measured from evenly laminated and highly contorted type O ash suggest that a readjustment of magnetic grains in water‐saturated ash shortly after deposition may account for the close agreement of TRM and DRM.

Idaho, Montana, Wyoming↗
USGS2012

Strain accumulation rates in the western United States between 1970 and 1978

The rate of dilatation and the rate and direction of shear have been determined from trilateration data for 23 Geodolite networks in the western United States. Sixteen nets are located along the San Andreas fault system between Point Reyes, California, and the United States‐Mexico border. Other locations are across the Garlock fault in California; across Puget Sound near Seattle, Washington; near Hanford in eastern Washington; near Hebgen Lake in Montana; across the Wasatch fault at Ogden, Utah; across the Rio Grande rift at Socorro, New Mexico; and Dixie Valley in Nevada; and at the northern end of Owens Valley on the California‐Nevada border. Implicit in the treatment are the assumptions that the strain was accumulating at a constant rate over the time period (within the interval 1970–1978) and over the local area (usually about 50‐km diameter) covered by the surveys. Of the nets located away from the San Andreas fault, only Ogden and Hebgen show significant strain accumulation. At Ogden the deformation is principally an east‐west compression of 0.23±0.05 μstrain/yr and at Hebgen Lake a northeast‐southwest extension of 0.17±0.03 μstrain/yr. Along the San Andreas fault system the rate of shear is 0.2 to 0.4μ/yr. The direction of shear agrees very well with the surface strike of nearby faults. This agreement is maintained even in regions like the ‘big bend,’ where both the fault strike and the observed shear direction are more westerly than they are elsewhere. Shear strain in northern California appears to be concentrated more closely on the faults, whereas in southern California the strain is a broader, smoother feature. In the San Francisco Bay area the strain data indicate slip at depth on both the San Andreas and the Calaveras faults. In addition to the observed shear the nets in California indicate a negative dilatation (areal decrease) of about 0.2 μstrain/yr. This dilatation is unexplained, but the following sources appear unlikely: (1) systematic survey error, (2) an association with the southern California uplift, (3) an association with the big bend in the San Andreas fault in Southern California, or (4) the result of the superposition of a uniaxial strain on the Pacific‐North American plate boundary shear.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Regional deformation of the Sierra Nevada, California, on conjugate microfault sets

Strike slip microfaults are pervasive throughout the granitic rocks of the eastern Sierra Nevada. Offsets typically range from less than a millimeter to several tens of centimeters but exceed 100 m in some places. The spacing between microfaults varies from a few tens of centimeters to a few tens of meters throughout much of the high Sierra Nevada. Many of these microfaults are loci of slickensided, compact fault gouge, and they are commonly mineralized by quartz veinlets with minor amounts of epidote, chlorite, and rare sulphide minerals. The microfaults are oriented in two nearly vertical conjugate sets; a north to northeast striking set showing right lateral offset and an east to northeast striking set showing left lateral offset. Microfaults with left lateral offset are more common than microfaults with right lateral offset. Most lineaments visible on aerial photographs are microfaults. The age of this microfaulting is not precisely known. It developed after consolidation of the youngest granitic plutons in the Sierra (79 m.y. B.P.) and is known to cut a late Miocene volcanic dike in one area. Slickensides along the microfaults are subhorizontal but show a slight (about 3°) westward plunging average inclination, suggesting that much of the deformation occurred prior to the westward tilting of the Sierran block in late Tertiary time. The direction of maximum horizontal extensional strain (determined as the bisector of average microfault trends) changes systematically from north to south (WNW at 38.5°N; NW at 36.5°N). A pure shear constant volume solution based on a detailed study of microfaults at 37°20′N indicates a maximum extension of 2.3% in a N61°W direction. These extension directions are remarkably parallel to late Mesozoic to present‐day tectonic extension directions in the Basin and Range province. The pattern of microfaulting demonstrates that the supposedly monolithic Sierran terrane was also affected by the late Cenozoic and possibly earlier regional extension of western North America and provides an independent criterion for determining extensional strain directions.

California↗
USGS2012

Geodolite measurements of deformation near Hollister, California, 1971-1978

A 24‐station trilateration network spanning the San Andreas and Calaveras faults near Hollister, California, has been surveyed each year between 1971 and 1978, inclusive. Two moderate ( M L = 5) earthquakes have occurred within the network during the interval. No convincing preseismic or coseismic anomalies associated with those earthquakes have been identified. The deformation of the network can be described roughly by rigid body motion of the three blocks bounded by the two faults with accommodation occurring by right‐lateral strike slip on the San Andreas (13±2 mm/a) and Calaveras (17±2 mm/a) faults. The required slip rates are within the range of the observed fault creep on those faults. A more detailed analysis of the deformation indicates appreciable strain accumulation (0.4 μstrain/a tensor shear) within the block lying between the San Andreas and Calaveras faults. Many of the features of the observed deformation can be produced by an elementary dislocation model, indicating that most of the deformation is associated directly with slip on the major faults. The network is not extensive enough to define uniquely the relative motion across the San Andreas fault system, but the data are consistent with a value of about 38 mm/a. The rate of deformation in 1971–1978 was not uniform but rather appears to have been higher than normal in 1973–1974 and lower than normal in 1975–1976.

California↗