SEARCH · USGS Science

Results for “Electronics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76Linked to original sources

USGS2009

Design and Performance of an Enhanced Bioremediation Pilot Test in a Tidal Wetland Seep, West Branch Canal Creek, Aberdeen Proving Ground, Maryland

Because of a lack of available in situ remediation methods for sensitive wetland environments where contaminated groundwater discharges, the U.S. Geological Survey, in cooperation with the U.S. Army Garrison, Aberdeen Proving Ground, Maryland, conceived, designed, and pilot tested a permeable reactive mat that can be placed horizontally at the groundwater/surface-water interface. Development of the reactive mat was part of an enhanced bioremediation study in a tidal wetland area along West Branch Canal Creek at Aberdeen Proving Ground, where localized areas of preferential discharge (seeps) transport groundwater contaminated with carbon tetrachloride, chloroform, tetrachloroethene, trichloroethene, and 1,1,2,2-tetrachloroethane from the Canal Creek aquifer to land surface. The reactive mat consisted of a mixture of commercially available organic- and nutrient-rich peat and compost that was bioaugmented with a dechlorinating microbial consortium, WBC-2, developed for this study. Due to elevated chlorinated methane concentrations in the pilot test site, a layer of zero-valent iron mixed with the peat and compost was added at the base of the reactive mat to promote simultaneous abiotic and biotic degradation. The reactive mat for the pilot test area was designed to optimize chlorinated volatile organic compound degradation efficiency without altering the geotechnical and hydraulic characteristics, or creating undesirable water quality in the surrounding wetland area, which is referred to in this report as achieving geotechnical, hydraulic, and water-quality compatibility. Optimization of degradation efficiency was achieved through the selection of a sustainable organic reactive matrix, electron donor, and bioaugmentation method. Consideration of geotechnical compatibility through design calculations of bearing capacity, settlement, and geotextile selection showed that a 2- to 3-feet tolerable thickness of the mat was possible, with 0.17 feet settlement predicted for unconsolidated sediments between 1.5 and 6 years following installation of the reactive mat. To ensure hydraulic compatibility in the mat design, mat materials that had a hydraulic conductivity greater than the surrounding wetland sediments were selected, and the mixture was optimized to consist of 1.5 parts compost, 1.5 parts peat and 1 part sand as a safeguard against fluidization. Sediment and matrix properties also indicated that a nonwoven geotextile with a cross-plane flow greater than that of the native sediments was suitable as the base of the reactive mat. Another nonwoven geotextile was selected for installation between the iron mix and organic zones of the mat to create more laminar flow conditions within the mat. Total metals and sequential extraction procedure analyses of mat materials, which were conducted to evaluate water-quality compatibility of the mat materials, showed that concentrations of metals in the compost ranged from one-half to one order of magnitude below consensus-based probable effect concentrations in sediment. A 22-inch-thick reactive mat, containing 0.5 percent WBC-2 by volume, was constructed at seep area 3-4W and monitored from October 2004 through October 2005 for the pilot test. No local, immediate failure of the mat or of wetland sediments was observed during mat installation, indicating that design estimates of bearing capacity and geotextile textile selection ensured the integrity of the mat and wetland sediments during and following installation. Measurements of surface elevation of the mat showed an average settlement of the mat surface of approximately 0.25 feet after 10 months, which was near the predicted settlement for unconsolidated sediment. Monitoring showed rapid establishment and sustainment throughout the year of methanogenic conditions conducive to anaerobic biodegradation and efficient dechlorination activity by WBC-2. The median mass removal of chloromethanes and total chloroethenes and ethane during the

Scientific Investigations Report↗

USGS2009

Community exposure to lahar hazards from Mount Rainier, Washington

Geologic evidence of past events and inundation modeling of potential events suggest that lahars associated with Mount Rainier, Washington, are significant threats to downstream development. To mitigate potential impacts of future lahars and educate at-risk populations, officials need to understand how communities are vulnerable to these fast-moving debris flows and which individuals and communities may need assistance in preparing for and responding to an event. To support local risk-reduction planning for future Mount Rainier lahars, this study documents the variations among communities in King, Lewis, Pierce, and Thurston Counties in the amount and types of developed land, human populations, economic assets, and critical facilities in a lahar-hazard zone. The lahar-hazard zone in this study is based on the behavior of the Electron Mudflow, a lahar that traveled along the Puyallup River approximately 500 years ago and was due to a slope failure on the west flank of Mount Rainier. This lahar-hazard zone contains 78,049 residents, of which 11 percent are more than 65 years in age, 21 percent do not live in cities or unincorporated towns, and 39 percent of the households are renter occupied. The lahar-hazard zone contains 59,678 employees (4 percent of the four-county labor force) at 3,890 businesses that generate $16 billion in annual sales (4 and 7 percent, respectively, of totals in the four-county area) and tax parcels with a combined total value of $8.8 billion (2 percent of the study-area total). Employees in the lahar-hazard zone are primarily in businesses related to manufacturing, retail trade, transportation and warehousing, wholesale trade, and construction. Key road and rail corridors for the region are in the lahar-hazard zone, which could result in significant indirect economic losses for businesses that rely on these networks, such as the Port of Tacoma. Although occupancy values are not known for each site, the lahar-hazard zone contains numerous dependent-population facilities (for example, schools and child day-care centers), public venues (for example, religious organizations and hotels), and critical facilities (for example, police and fire stations). The lahar-hazard zone also includes high-volume tourist sites, such as Mount Rainier National Park and the Puyallup Fairgrounds. Community exposure to lahars associated with Mount Rainier varies considerably among 27 communities and four counties—some may experience great losses that reflect only a small portion of their community and others may experience relatively small losses that devastate them. Among 27 communities, the City of Puyallup has the highest number of people and assets in the lahar-hazard zone, whereas the communities of Carbonado, Fife, Orting, and Sumner have the highest percentages of people and assets in this zone. Based on a composite index, the cities of Puyallup, Sumner, and Fife have the highest combinations of the number and percentage of people and assets in lahar-prone areas.

Washington↗

USGS2011

Development of flood-inundation maps for the West Branch Susquehanna River near the Borough of Jersey Shore, Lycoming County, Pennsylvania

Streamflow data, water-surface-elevation profiles derived from a Hydrologic Engineering Center River Analysis System hydraulic model, and geographical information system digital elevation models were used to develop a set of 18 flood-inundation maps for an approximately 5-mile reach of the West Branch Susquehanna River near the Borough of Jersey Shore, Pa. The inundation maps were created by the U.S. Geological Survey in cooperation with the Susquehanna River Basin Commission and Lycoming County as part of an ongoing effort by the National Oceanic and Atmospheric Administration's National Weather Service to focus on continued improvements to the flood forecasting and warning abilities in the Susquehanna River Basin and to modernize flood-forecasting methodologies. The maps, ranging from 23.0 to 40.0 feet in 1-foot increments, correspond to river stage at the U.S. Geological Survey streamgage 01549760 at Jersey Shore. The electronic files used to develop the maps were provided to the National Weather Service for incorporation into their Advanced Hydrologic Prediction Service website. The maps are displayed on this website, which serves as a web-based floodwarning system, and can be used to identify areas of predicted flood inundation associated with forecasted flood-peak stages. During times of flooding or predicted flooding, these maps can be used by emergency managers and the public to take proactive steps to protect life and reduce property damage caused by floods.

Pennsylvania↗

USGS2012

Assessment of the geoavailability of trace elements from minerals in mine wastes: analytical techniques and assessment of selected copper minerals

In this study, four randomly selected copper-bearing minerals were examined—azurite, malachite, bornite, and chalcopyrite. The objectives were to examine and enumerate the crystalline and chemical properties of each of the minerals, to determine which, if any, of the Cu-bearing minerals might adversely affect systems biota, and to provide a multi-procedure reference. Laboratory work included use of computational software for quantifying crystalline and amorphous material and optical and electron imaging instruments to model and project crystalline structures. Chemical weathering, human fluid, and enzyme simulation studies were also conducted. The analyses were conducted systematically: X-ray diffraction and microanalytical studies followed by a series of chemical, bio-leaching, and toxicity experiments.

Scientific Investigations Report↗

USGS2012

Estimating basin lagtime and hydrograph-timing indexes used to characterize stormflows for runoff-quality analysis

A nationwide study to better define triangular-hydrograph statistics for use with runoff-quality and flood-flow studies was done by the U.S. Geological Survey (USGS) in cooperation with the Federal Highway Administration. Although the triangular hydrograph is a simple linear approximation, the cumulative distribution of stormflow with a triangular hydrograph is a curvilinear S-curve that closely approximates the cumulative distribution of stormflows from measured data. The temporal distribution of flow within a runoff event can be estimated using the basin lagtime, (which is the time from the centroid of rainfall excess to the centroid of the corresponding runoff hydrograph) and the hydrograph recession ratio (which is the ratio of the duration of the falling limb to the rising limb of the hydrograph). This report documents results of the study, methods used to estimate the variables, and electronic files that facilitate calculation of variables. Ten viable multiple-linear regression equations were developed to estimate basin lagtimes from readily determined drainage basin properties using data published in 37 stormflow studies. Regression equations using the basin lag factor (BLF, which is a variable calculated as the main-channel length, in miles, divided by the square root of the main-channel slope in feet per mile) and two variables describing development in the drainage basin were selected as the best candidates, because each equation explains about 70 percent of the variability in the data. The variables describing development are the USGS basin development factor (BDF, which is a function of the amount of channel modifications, storm sewers, and curb-and-gutter streets in a basin) and the total impervious area variable (IMPERV) in the basin. Two datasets were used to develop regression equations. The primary dataset included data from 493 sites that have values for the BLF, BDF, and IMPERV variables. This dataset was used to develop the best-fit regression equation using the BLF and BDF variables. The secondary dataset included data from 896 sites that have values for the BLF and IMPERV variables. This dataset was used to develop the best-fit regression equation using the BLF and IMPERV variables. Analysis of hydrograph recession ratios and basin characteristics for 41 sites indicated that recession ratios are random variables. Thus, recession ratios cannot be estimated quantitatively using multiple linear regression equations developed using the data available for these sites. The minimums of recession ratios for different streamgages are well characterized by a value of one. The most probable values and maximum values of recession ratios for different streamgages are, however, more variable than the minimums. The most probable values of recession ratios for the 41 streamgages analyzed ranged from 1.0 to 3.52 and had a median of 1.85. The maximum values ranged from 2.66 to 11.3 and had a median of 4.36.

Scientific Investigations Report↗

USGS2013

Hydrographic surveys of the Missouri and Yellowstone Rivers at selected bridges and through Bismarck, North Dakota, during the 2011 flood

The U.S. Geological Survey (USGS), in cooperation with the North Dakota Department of Transportation and the North Dakota State Water Commission, completed hydrographic surveys at six Missouri River bridges and one Yellowstone River bridge during the 2011 flood of the Missouri River system. Bridges surveyed are located near the cities of Cartwright, Buford, Williston, Washburn, and Bismarck, N. Dak. The river in the vicinity of the bridges and the channel through the city of Bismarck, N. Dak., were surveyed. The hydrographic surveys were conducted using a high-resolution multibeam echosounder (MBES), the RESON SeaBat TM 7125, during June 6–9 and June 28–July 9, 2011. The surveyed area at each bridge site extended 820 feet upstream from the bridge to 820 feet downstream from the bridge. The surveyed reach through Bismarck consisted of 18 miles of the main channel wherever depth was sufficient. Results from these emergency surveys aided the North Dakota Department of Transportation in evaluating the structural integrity of the bridges during high-flow conditions. In addition, the sustained high flows made feasible the surveying of a large section of the normally shallow channel with the MBES. In general, results from sequential bridge surveys showed that as discharge increased between the first and second surveys at a given site, there was a general trend of channel scour. Locally, complex responses of scour in some areas and deposition in other areas of the channel were identified. Similarly, scour around bridge piers also showed complex responses to the increase in flow between the two surveys. Results for the survey area of the river channel through Bismarck show that, in general, scour occurred around river structures or where the river has tight bends and channel narrowing. The data collected during the surveys are provided electronically in two different file formats: comma delimited text and CARIS Spatial Archive TM (CSAR TM ) format.

North Dakota↗

USGS2013

Erosion monitoring along the Coosa River below Logan Martin Dam near Vincent, Alabama, using terrestrial light detection and ranging (T-LiDAR) technology

Alabama Power operates a series of dams on the Coosa River in east central Alabama. These dams form six reservoirs that provide power generation, flood control, recreation, economic opportunity, and fish and wildlife habitats to the region. The Logan Martin Reservoir is located approximately 45 kilometers east of Birmingham and borders Saint Clair and Talladega Counties. Discharges below the reservoir are controlled by power generation at Logan Martin Dam, and there has been an ongoing concern about the stability of the streambanks downstream of the dam. The U.S. Geological Survey, in cooperation with Alabama Power conducted a scientific investigation of the geomorphic conditions of a 115-meter length of streambank along the Coosa River by using tripod-mounted terrestrial light detection and ranging technology. Two surveys were conducted before and after the winter flood season of 2010 to determine the extent and magnitude of geomorphic change. A comparison of the terrestrial light detection and ranging datasets indicated that approximately 40 cubic meters of material had been eroded from the upstream section of the study area. The terrestrial light detection and ranging data included in this report consist of electronic point cloud files containing several million georeferenced data points, as well as a surface model measuring changes between scans.

Alabama↗

USGS2014

External quality-assurance project report for the National Atmospheric Deposition Program/National Trends Network and Mercury Deposition Network, 2009-2010

The U.S. Geological Survey operated six distinct programs to provide external quality-assurance monitoring for the National Atmospheric Deposition Program/National Trends Network (NTN) and Mercury Deposition Network (MDN) during 2009–2010. The field-audit program assessed the effects of onsite exposure, sample handling, and shipping on the chemistry of NTN samples; a system-blank program assessed the same effects for MDN. Two interlaboratory-comparison programs assessed the bias and variability of the chemical analysis data from the Central Analytical Laboratory (CAL) and Mercury (Hg) Analytical Laboratory (HAL). The blind-audit program was also implemented for the MDN to evaluate analytical bias in total Hg concentration data produced by the HAL. The co-located-sampler program was used to identify and quantify potential shifts in NADP data resulting from replacement of original network instrumentation with new electronic recording rain gages (E-gages) and precipitation collectors that use optical sensors. The results indicate that NADP data continue to be of sufficient quality for the analysis of spatial distributions and time trends of chemical constituents in wet deposition across the United States. Results also suggest that retrofit of the NADP networks with the new precipitation collectors could cause –8 to +14 percent shifts in NADP annual precipitation-weighted mean concentrations and total deposition values for ammonium, nitrate, sulfate, and hydrogen ion, and larger shifts (+13 to +74 percent) for calcium, magnesium, sodium, potassium, and chloride. The prototype N-CON Systems bucket collector is more efficient in the catch of precipitation in winter than Aerochem Metrics Model 301 collector, especially for light snowfall.

Scientific Investigations Report↗

USGS2014

The lifecycle of silver in the United States in 2009

Because silver is highly sought after for its properties, which make it eminently suitable for new technology applications, a clear understanding of the flow of materials in the economy, the historical context, and trends for the future can help project the future of silver in the economy of the United States. Silver has many properties that are desired in today’s economy. It has superior electrical and heat conductivity, chemical stability, high-temperature strength, malleability, and other characteristics that make it important in high-tech electronic and other industrial applications. Because it is relatively scarce as a natural resource and is easily coined, silver historically has been an important monetary metal. As knowledge of silver chemistry has increased, many industrial end uses have been developed. This study reviews the flows of silver into various end uses and examines the nature of the end use with respect to the silver properties desired and the ability of the end use to produce recyclable end-of-life materials. For the most part, silver can be profitably recycled, but the recycling activity is helped by tipping fees (fees imposed on scrap generators by scrap collectors for taking the material) for materials that might otherwise be regulated as hazardous wastes. New high-technology applications use silver in nanolevel amounts, leading to a potential for dissipative loss and reduced recycling capability.

Scientific Investigations Report↗

USGS2014

Geochronology and correlation of Tertiary volcanic and intrusive rocks in part of the southern Toquima Range, Nye County, Nevada

Extensive volcanic and intrusive igneous activity, partly localized along regional structural zones, characterized the southern Toquima Range, Nevada, in the late Eocene, Oligocene, and Miocene. The general chronology of igneous activity has been defined previously. This major episode of Tertiary magmatism began with emplacement of a variety of intrusive rocks, followed by formation of nine major calderas and associated with voluminous extrusive and additional intrusive activity. Emplacement of volcanic eruptive and collapse megabreccias accompanied formation of some calderas. Penecontemporaneous volcanism in central Nevada resulted in deposition of distally derived outflow facies ash-flow tuff units that are interleaved in the Toquima Range with proximally derived ash-flow tuffs. Eruption of the Northumberland Tuff in the north part of the southern Toquima Range and collapse of the Northumberland caldera occurred about 32.3 million years ago. The poorly defined Corcoran Canyon caldera farther to the southeast formed following eruption of the tuff of Corcoran Canyon about 27.2 million years ago. The Big Ten Peak caldera in the south part of the southern Toquima Range Tertiary volcanic complex formed about 27 million years ago during eruption of the tuff of Big Ten Peak and associated air-fall tuffs. The inferred Ryecroft Canyon caldera formed in the south end of the Monitor Valley adjacent to the southern Toquima Range and just north of the Big Ten Peak caldera in response to eruption of the tuff of Ryecroft Canyon about 27 million years ago, and the Moores Creek caldera just south of the Northumberland caldera developed at about the same time. Eruption of the tuff of Mount Jefferson about 26.8 million years ago was accompanied by collapse of the Mount Jefferson caldera in the central part of the southern Toquima Range. An inferred caldera, mostly buried beneath alluvium of Big Smoky Valley southwest of the Mount Jefferson caldera, formed about 26.5 million years ago with eruption of the tuff of Round Mountain. The Manhattan caldera south of the Mount Jefferson caldera and northwest of the Big Ten Peak caldera formed in association with eruption of a series of tuffs, principally the Round Rock Formation, mostly ash-flow tuff, about 24.4 million years ago. Extensive 40 Ar/ 39 Ar dating of about 60 samples that represent many of the Tertiary extrusive and intrusive rocks in the southern Toquima Range provides precise ages that refine the chronology of previously dated units. New geochronologic data indicate that the petrogenetically related Corcoran Canyon, Ryecroft Canyon, and Mount Jefferson calderas formed during a period of about 560,000 years. Electron microprobe analyses of phenocrysts from 20 samples of six dated units underscore inferred petrogenetic relations among some of these units. In particular, compositions of augite, hornblende, and biotite in tuffs erupted from the Corcoran Canyon, Ryecroft Canyon, and Mount Jefferson calderas are similar, which suggests that magmas represented by these tuffs have similar petrogenetic histories. The unique occurrence of hypersthene in Isom-type tuff confirms its derivation from a source beyond the southern Toquima Range.

Nevada↗

USGS2014

Pesticide trends in major rivers of the United States, 1992-2010

This report is part of a series of pesticide trend assessments led by the National Water-Quality Assessment Program of the U.S. Geological Survey. This assessment focuses on major rivers of various sizes throughout the United States that have large watersheds with a range of land uses, changes in pesticide use, changes in management practices, and natural influences typical of the regions being drained. Trends were assessed at 59 sites for 40 pesticides and pesticide degradates during each of three overlapping periods: 1992–2001, 1997–2006, and 2001–10. In addition to trends in concentration, trends in agricultural-use intensity (agricultural use) were also assessed at 57 of the sites for 35 parent compounds with agricultural uses during the same three periods. The SEAWAVE-Q model was used to analyze trends in concentration, and parametric survival regression for interval-censored data was used to assess trends in agricultural use. All trends are provided in downloadable electronic files. A subset of 39 sites was chosen to represent non-nested, generally independent basins for a national analysis of pesticide and agricultural-use trends for the most prevalent pesticides (15 pesticides and 2 degradation products). Graphical and numerical results are presented to provide a national overview of concentration and use trends. As another perspective on understanding pesticide concentration trends in large rivers in relation to multiple tributary watersheds, this report also presents a detailed assessment of concentration and use trends for simazine, metolachlor, atrazine, deethylatrazine, and diazinon for a set of 17 nested sites in the Mississippi River Basin (including the Ohio and Missouri River Basins), for the second and third trend periods. Pesticides strongly dominated by agricultural use—cyanazine, metolachlor, atrazine, and alachlor—had widespread agreement between concentration trends and agricultural-use trends. Pesticides with substantial use in agricultural and urban applications—simazine, tebuthiuron, Dacthal, pendimethalin, chlorpyrifos, malathion, diazinon, fipronil, carbofuran, and carbaryl—had concentration trends that were mostly explained by a combination of agricultural-use trends and concentration trends in urban streams that were evaluated in a separate companion study. The importance of the urban stream trends for explaining concentration trends in major rivers indicates the significance of nonagricultural uses of some pesticides to concentrations in major rivers despite the much smaller area of urban land use compared to agriculture. Deethylatrazine, a degradate of atrazine, was the only pesticide compound assessed that had frequent occurrences during 1997–2006 and 2001–10 of concentration trends in the opposite direction of use trends (atrazine use). The nested analysis for the Mississippi River indicates that most trends observed in the largest rivers—multiple Mississippi River sites, the Ohio River, and the Missouri River—are consistent with streamflow contributions and concentration trends observed at tributary sites. Streamflow (incorporated into the trend model and shown in the nested basin analysis), trends in agricultural use of pesticides (quantified in this report), and urban use of pesticides (represented by concentration trends in a companion study of urban streams) are all important influences on pesticide concentrations in streams and rivers. Consideration of these influences is vital to understanding trends in pesticide concentrations.

Scientific Investigations Report↗

USGS2015

Geochemical conditions and the occurrence of selected trace elements in groundwater basins used for public drinking-water supply, Desert and Basin and Range hydrogeologic provinces, 2006-11: California GAMA Priority Basin Project

The geochemical conditions, occurrence of selected trace elements, and processes controlling the occurrence of selected trace elements in groundwater were investigated in groundwater basins of the Desert and Basin and Range (DBR) hydrogeologic provinces in southeastern California as part of the Priority Basin Project (PBP) of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA PBP is designed to provide an assessment of the quality of untreated (raw) groundwater in the aquifer systems that are used for public drinking-water supply. The GAMA PBP is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey and the Lawrence Livermore National Laboratory. The DBR hydrogeologic provinces consist of 141 defined groundwater basins separated by mountain ranges, faults, and other features. This report presents analyses of data collected from nine study areas within the DBR hydrogeologic provinces: Antelope Valley, Borrego Valley, the Central Desert area, Coachella Valley, Colorado River, Indian Wells Valley, Low-Use Basins of the Mojave and Sonoran Deserts, the Mojave, and Owens Valley. Collectively, these nine study areas are referred to as the DBR study unit. The study unit covers approximately 7,000 square miles and includes the 63 groundwater basins in the DBR hydrogeologic provinces in which groundwater is used for public drinking-water supply. The vast majority of the 223 wells sampled for this study were long-screened production wells used primarily for public supply. Uncorrected carbon-14 ( 14 C) groundwater ages for samples collected in the DBR study unit ranged from less than (<) 100 to 33,700 years before present (BP). Sixty-six percent of sample ages were greater than (>) 100 years BP, and 40 percent were >3,800 years BP. Samples collected from wells located adjacent to mountain-front recharge areas or major surface-water features generally had younger groundwater ages than did samples collected from wells located away from mountain fronts or towards the distal ends of basin groundwater flow paths. Most groundwater sampled in the DBR study unit had alkaline pH: 89 percent of sample pH values ranged from 7.1 to 9.8, with 37 percent greater than or equal to (≥) 7.9. Groundwater age was significantly correlated (positively) with pH, likely because silicate weathering is a primary control on groundwater pH and is a slow process. The oxidation-reduction (redox) condition of the groundwater sampled in the DBR study unit was predominantly oxic (71 percent), except in the Colorado River study area where organic-rich fluvial aquifers provide the electron donors necessary to support iron-reducing (anoxic-Fe) redox processes. The cation type of 78 percent of the samples was either sodium- or mixed-type, and the anion type of 83 percent of the samples was either bicarbonate- or mixed-type. Sodium-type groundwaters generally were older and more alkaline than calcium-type groundwaters, consistent with the change in water chemistry expected from cation exchange between groundwater and aquifer sediments over long periods of time. Because of the correlation with young groundwater, calcium-type groundwater was predominantly from wells located adjacent to mountain-front recharge areas. Arsenic (As), boron (B), fluoride (F), molybdenum (Mo), strontium (Sr), uranium (U), and vanadium (V) were selected for assessment in this study because they occurred at concentrations greater than California Department of Public Health or U.S. Environmental Protection Agency regulatory or non-regulatory drinking-water-quality benchmarks in more than 2 percent of the 223 samples collected in the DBR study unit. As and F were detected most commonly (18 and 13 percent, respectively) at concentrations above associated water-quality benchmarks and Sr and V least frequently (both at 3 percent). Given that 14 C groundwater ages are predominantly >100 years BP, land use in the study unit is primarily undeveloped, and chemicals derived from anthropogenic sources, such as volatile organic compounds, were infrequently detected, high concentrations of these trace elements in groundwater were most likely the result of natural factors and not anthropogenic factors. As, F, Mo, and V concentrations showed significant positive correlations to groundwater age and to pH. This relation is partly due to the sources of trace elements likely being the weathering of primary minerals, such as silicate minerals, which is a slow process that takes place over hundreds to thousands of years. This relation also reflects the positive correlation between groundwater age and pH. Geochemical modeling predicted that the dominant species of As, Mo, and V in solution were oxyanions (HAsO 4 2– , MoO 4 2– , and H 2 VO 4– ), which are likely to be mobile in alkaline groundwater because mineral surfaces composing aquifer matrices have a predominantly negative surface charge under alkaline conditions. F also exists predominantly as a negatively charged ion (F – ). At pH values >7.5, saturation indices generated by the geochemical modeling program PHREEQC indicated that F solubility may be somewhat limited by the precipitation of the mineral fluorapatite [Ca 5 (PO 4 ) 3 F]. Speciation modeling of As in anoxic-Fe groundwater (iron-reducing conditions) showed that samples were supersaturated with orpiment (As 2 S 3 ), indicating that mineral precipitation may be responsible for low As concentrations observed in reducing groundwater. In contrast, U concentrations showed significant negative correlations to groundwater age and to pH. Higher U concentrations generally occurred in samples for which geochemical modeling indicated that the uncharged ternary complex Ca 2 UO 2 (CO 3 ) 3 was the dominant aqueous U species. This uncharged complex is not attracted to the charged surfaces of minerals and thus increases U solubility. Formation of Ca 2 UO 2 (CO 3 ) 3 was greater in younger groundwaters because calcium and uranium concentrations generally were lower in older groundwaters, likely due to cation-exchange processes and precipitation of the mineral calcite as groundwater pH increased. Co-precipitation of U with the calcite (CaCO 3 ) may remove U from the aqueous phase. Saturation indices indicated that the anoxic-Fe groundwaters from the Colorado River study area were supersaturated with the mineral uraninite (UO 2 ), suggesting that UO 2 precipitation may be responsible for the low concentrations of U observed in these samples. Concentrations of strontium, which exists primarily in a cationic form (Sr 2+ ), were not significantly correlated with either groundwater age or pH. Strontium concentrations showed a strong positive correlation with total dissolved solids (TDS). Dissolved constituents, such as Sr, that interact with mineral surfaces through outer-sphere complexation become increasingly soluble with increasing TDS concentrations of groundwater. Boron concentrations also showed a significant positive correlation with TDS, indicating the B may interact to a large degree with mineral surfaces through outer-sphere complexation.

California↗

USGS2017

Maps and grids of hydrogeologic information created from standardized water-well drillers’ records of the glaciated United States

As part of the National Water Availability and Use Program established by the U.S. Geological Survey (USGS) in 2005, this study took advantage of about 14 million records from State-managed collections of water-well drillers’ records and created a database of hydrogeologic properties for the glaciated United States. The water-well drillers’ records were standardized to be relatively complete and error-free and to provide consistent variables and naming conventions that span all State boundaries. Maps and geospatial grids were developed for (1) total thickness of glacial deposits, (2) total thickness of coarse-grained deposits, (3) specific-capacity based transmissivity and hydraulic conductivity, and (4) texture-based estimated equivalent horizontal and vertical hydraulic conductivity and transmissivity. The information included in these maps and grids is required for most assessments of groundwater availability, in addition to having applications to studies of groundwater flow and transport. The texture-based estimated equivalent horizontal and vertical hydraulic conductivity and transmissivity were based on an assumed range of hydraulic conductivity values for coarse- and fine-grained deposits and should only be used with complete awareness of the methods used to create them. However, the maps and grids of texture-based estimated equivalent hydraulic conductivity and transmissivity may be useful for application to areas where a range of measured values is available for re-scaling. Maps of hydrogeologic information for some States are presented as examples in this report but maps and grids for all States are available electronically at the project Web site (USGS Glacial Aquifer System Groundwater Availability Study, http://mi.water.usgs.gov/projects/WaterSmart/Map-SIR2015-5105.html ) and the Science Base Web site, https://www.sciencebase.gov/catalog/item/58756c7ee4b0a829a3276352 .

Alaska, Connecticut, Idaho, Illinois, Indiana, Iow↗

USGS2015

Lead scrap use and trade patterns in the United States, 1995-2012

Since 1995, domestic production of lead has increasingly shifted from primary mining and smelting to the recovery of lead-bearing scrap by the secondary lead industry, which accounted for 91 percent of U.S. lead production in 2012. Increasingly stringent environmental regulations for lead emissions in the United States have contributed to the closure of primary lead refineries and the consolidation of the secondary lead industry. Domestic production of lead from the primary and secondary sectors in 2012 is essentially unchanged from the amount produced in 1995. The U.S. secondary industry produced an estimated 145,000 metric tons more refined lead in 2012 than it did in 1995, primarily by recovering lead from battery scrap, allowing the U.S. to maintain production at a level sufficient to supply much of the domestic demand for lead. Exports of lead contained in batteries, electronics, and scrap and waste increased more than 380 percent from 1998 through 2011. Trade patterns of lead scrap products among Canada, Mexico, and the United States have changed since initiation of the North American Free Trade Agreement in 1994, providing more flexibility of movement of materials such as lead scrap among these three trading partners. Canada was the source of an average of 98 percent of the lead contained in scrap batteries imported into the United States during the period 1998 through 2012. Canada received about 92 percent of the lead contained in scrap and waste exported from the United States in 1998; Mexico received about 89 percent of the lead contained in battery scrap exported from the United States in 2012. Domestic secondary lead facilities have been able to maintain production because of increasing domestic and foreign supply of spent lead-acid vehicle batteries, which accounted for about 95 percent of U.S. secondary lead consumption in 2012. Increased industrialization in China, India, and the Republic of Korea has led to increased demand for lead concentrates, lead scrap, and refined lead from imported sources to supplement growing domestic production. Consequently, about 94 percent of the lead in ores and concentrate produced in the United States was exported to Asia in 2012 compared to about 18 percent in 1995, and about 72 percent of lead-based scrap was exported from the United States to Asian countries in 2012 compared to about 7 percent in 1995.

Scientific Investigations Report↗

USGS2016

Hydrogeologic investigations of the Miocene Nogales Formation in the Nogales Area, Upper Santa Cruz Basin, Arizona

Hydrogeologic investigations were conducted to evaluate the groundwater resource potential for the Miocene Nogales Formation in the Nogales area, southern Arizona. Results indicate that parts of the formation may provide new, deeper sources of groundwater for the area. Geologic mapping determined the hydrogeologic framework of the formation by defining lithologic, mineralogic, and stratigraphic characteristics; identifying potential aquifers and confining units; and mapping faults and fractures which likely influence groundwater flow. Geophysical modeling was used to determine the basin geometry and thickness of the Nogales Formation and younger alluvial aquifers and to identify target areas (deep subbasins) which may prove to be productive aquifers. Volcaniclastic sandstone samples from the formation were analyzed for porosity, bulk density, saturated hydraulic conductivity, and fabric. Effective porosity ranges from 16 to 42 percent, bulk density from 1.6 to 2.47 grams per cubic centimeter, and saturated hydraulic conductivity (SHC) from 4 to 57 centimeters per day (4.9×10 -5 to 6.7×10 -4 centimeters per second). Thin sections show that sandstone framework grains consist of quartz, feldspar, biotite, hornblende, pumice, volcanic glass, and opaque minerals. The matrix in most samples consists of pumice fragments, and some contain predominantly silt and clay. Samples with a mostly silt and clay matrix have lower porosity and SHC compared to samples with mostly pumice, which have higher and wider ranges of porosity and SHC. Pore space in the Nogales Formation sediments includes moldic, intercrystalline, and fracture porosity. Some intercrystalline pore space is partially filled with calcite cement. About one third of the samples contain fractures, which correspond to fractures noted in outcrops in all members of the formation. Scanning electron microscope (SEM) and x-ray diffraction (XRD) analyses indicate that most of the samples contained the zeolite clinoptilolite and mixed-layer clay. X-ray diffraction analyses verified clinoptilolite as the only zeolite in Nogales Formation samples; they also verified the presence of smectite and illite clay and some kaolinite. Samples which contain greater amounts of clinoptilolite and lesser amounts of smectite have high porosity and SHC in narrow ranges. However, samples with abundant smectite and lesser amounts of clinoptilolite span the entire ranges of porosity and SHC for the formation. All members of the Nogales Formation are fractured and faulted as a result of Tertiary Basin and Range extensional deformation, which was broadly contemporaneous with deposition of the formation. These structures may have significant influence on groundwater flow in the upper Santa Cruz basin because, although many of the sediments in the formation have characteristics indicating they may be productive aquifers based only on porous-media flow, fracturing in these sediments may further enhance permeability and groundwater flow in these basin-fill aquifers by orders of magnitude.

Arizona↗

USGS2017

The discovery and character of Pleistocene calcrete uranium deposits in the Southern High Plains of west Texas, United States

This report describes the discovery and geology of two near-surface uranium deposits within calcareous lacustrine strata of Pleistocene age in west Texas, United States. Calcrete uranium deposits have not been previously reported in the United States. The west Texas uranium deposits share characteristics with some calcrete uranium deposits in Western Australia—uranium-vanadium minerals hosted by nonpedogenic calcretes deposited in saline lacustrine environments. In the mid-1970s, Kerr-McGee Corporation conducted a regional uranium exploration program in the Southern High Plains province of the United States, which led to the discovery of two shallow uranium deposits (that were not publicly reported). With extensive drilling, Kerr-McGee delineated one deposit of about 2.1 million metric tons of ore with an average grade of 0.037 percent U 3 O 8 and another deposit of about 0.93 million metric tons of ore averaging 0.047 percent U 3 O 8 . The west-Texas calcrete uranium-vanadium deposits occur in calcareous, fine-grained sediments interpreted to be deposited in saline lakes formed during dry interglacial periods of the Pleistocene. The lakes were associated with drainages upstream of a large Pleistocene lake. Age determinations of tephra in strata adjacent to one deposit indicate the host strata is middle Pleistocene in age. Examination of the uranium-vanadium mineralization by scanning-electron microscopy indicated at least two generations of uranium-vanadium deposition in the lacustrine strata identified as carnotite and a strontium-uranium-vanadium mineral. Preliminary uranium-series results indicate a two-component system in the host calcrete, with early lacustrine carbonate that was deposited (or recrystallized) about 190 kilo-annum, followed much later by carnotite-rich crusts and strontium-uranium-vanadium mineralization in the Holocene (about 5 kilo-annum). Differences in initial 234 U/ 238 U activity ratios indicate two separate, distinct fluid sources.

Texas↗

USGS2019

Capacity and area of Grand Lake O’ the Cherokees, northeastern Oklahoma, 2009

In February 2017, the Grand River Dam Authority filed to relicense the Pensacola Hydroelectric Project with the Federal Energy Regulatory Commission. The predominant feature of the Pensacola Hydroelectric Project is Pensacola Dam, which impounds Grand Lake O’ the Cherokees (locally called Grand Lake) in northeastern Oklahoma. Identification of information gaps and assessment of project effects on stakeholders are central aspects of the Federal Energy Regulatory Commission relicensing process. Due to the natural changes to the reservoir over time, new capacity and area tables are needed periodically. The most recent complete capacity and area table was produced in 1940. Capacity and area tables identify the relations between the elevation of the water surface and the volume of water that can be impounded at each water surface elevation. This report (1) presents an updated capacity and area table for Grand Lake O’ the Cherokees for 2009, (2) describes the methods used to calculate the updated capacity and area values presented in the table, and (3) compares the updated capacity table to historical capacity tables produced from a survey in 1940 and from a hydrographic survey of the lake by the Oklahoma Water Resources Board in 2009. The new capacity values computed for Grand Lake O’ the Cherokees indicate that capacity at conservation pool elevation has decreased about 157,000 acre-feet or 10 percent since 1940 and capacity at top of dam elevation has decreased about 200,000 acre-feet or 8 percent since 1940. This difference in the capacities could be attributed to the advancements of technologies; the techniques used for surveying lakes have changed from the 1940 survey to the 2009 survey. Another possible reason for loss in capacity could be as time progresses, lakes like Grand Lake O’ the Cherokees slowly impound sediment carried by the rivers that feed into the lakes, thus diminishing the amount of water that the lake holds. The most recent survey used measured water depths and Global Position System collected electronically, but the methods used to collect data in 1940 are unknown. Due to the advancement of technology, the 2009 survey is likely more precise than the 1940 survey.

Oklahoma↗

USGS2021

A comparison of Landsat 8 Operational Land Imager and Provisional Aquatic Reflectance science product, Sentinel–2B, and WorldView–3 imagery for empirical satellite-derived bathymetry, Unalakleet, Alaska

Satellite-derived bathymetry (SDB) based upon an empirical band ratio method is a cost-effective means for mapping nearshore bathymetry in coastal areas vulnerable to natural hazards. This is particularly important for the low-lying coastal community of Unalakleet, Alaska, that has been negatively affected not only by flooding, storm surge, and historically strong storms but also by high erosion rates stemming from the Unalakleet River and Norton Sound. The purpose of this study was to assess the viability of different satellite imagery, including Landsat 8 (L8) Operational Land Imager, Sentinel–2B, WorldView–3, and L8 Provisional Aquatic Reflectance science product, for deriving SDB for Unalakleet, Alaska. Correlations were performed between satellite imagery band ratios and topobathymetric (topobathy) light detection and ranging (lidar) and in situ single-beam sound navigation and ranging (sonar). The satellite imagery correlations with topobathy lidar did not yield as high of a linear relation with water depths as the satellite imagery correlations with the single-beam sonar. An extinction depth, where light no longer attenuates through the water column, was not identified because of the shallow depths within the topobathy lidar and single-beam sonar datasets. Although some single-beam soundings measured at 7 meters deep, the correlations with the SDB band ratios did not yield a strong linear relation. Satellite imagery band ratio correlations with Electronic Navigational Chart soundings did not yield a strong linear relation because of older source data. Less than optimal linear regressions were most likely due to the geography of Unalakleet, Alaska, a low-lying coastal community subject to high erosion rates from surrounding waters. This study is one of the first attempts to compare different satellite imagery band ratio correlations with topobathy lidar and in situ sonar to assess the viability for nearshore SDB for coastal Unalakleet, Alaska.

Alaska↗