SEARCH · USGS Science

Results for “Earth and Space Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,660 records · Page 76Linked to original sources

USGS2024

Timing and geometry of the Chemehuevi Formation reveal a late Pleistocene sediment pulse into the Lower Colorado River

The Chemehuevi Formation is a distinctive 50−150-m-thick wedge-shaped Pleistocene sedimentary unit deposited by the Colorado River. It lines the perimeters of the river’s floodplains and bedrock canyons for more than 600 km between the mouth of the Grand Canyon and the delta region in the Gulf of California. The formation is composed of a basal tan to light-yellowish-brown and pale-orange mud-dominated facies overlain and interbedded by a light-yellow-brown sand-dominated facies. The unit is one of two extensively exposed aggradational packages in the Lower Colorado River corridor, in addition to a series of other smaller alluvial terrace deposits. The Chemehuevi Formation appears to represent the response of a fully integrated Colorado River system to a significant perturbation, in contrast to the Bullhead Alluvium, which is likely a unique result of Pliocene river integration. The aggradation of the Chemehuevi Formation in the Lower Colorado River corridor may be similarly due to a unique event in the Colorado River system, or it may instead be a well-preserved sedimentary sequence recording typical behavior of the Colorado River below the Grand Canyon in the late Pleistocene. As such, multiple causal mechanisms have been proposed, but no study to date has conclusively explained the Chemehuevi Formation. To help resolve its timing, duration, and origin, we applied post-infrared infrared stimulated luminescence, carbonate U-Th series, and zircon sensitive high-resolution ion microprobe U-Th series geochronology to determine the ages of key exposures of the unit over a wide spatial area. These new data demonstrate that the Chemehuevi Formation was deposited ca. 110−90 ka. The depositional ages collectively overlap, suggesting that deposition occurred rapidly relative to the resolution of the geochronometers. The new depositional timing coincides with a shift from glacial to interglacial conditions after the marine isotope stage 5-6 transition. This observation is consistent with a climate-induced sediment pulse as a causal mechanism, yet correlations with similar deposits in the Colorado River headwaters or in neighboring catchments appear elusive. Potentially, climate transitions between glacial and interglacial periods induced a sediment pulse from hillslopes of the Colorado River system that resulted in the Chemehuevi Formation. An alternative or additional explanation is that the Chemehuevi Formation represents release of lava dam−impounded sediment in the Grand Canyon. The surface geometry of the Chemehuevi Formation projects upstream to the approximate location of lava dams, and the largest possible lava dam impoundment (the Upper Prospect dam) is comparable in volume to the formation. The lava dam hypothesis appears to be a possible explanation for the Chemehuevi Formation. However, tying deposition to a specific lava dam or series of lava dams remains challenging due to discrepancies in timing and volume. The combined effects of a series of lava dams may have led to the Chemehuevi Formation, as the last Pleistocene lava dam eruption coincides with the onset of deposition. Alternatively, the formation may result from the combined effects of both regional climate transitions and the lava dams that created a transient reservoir to compound a climate transition−driven sediment pulse. The geochronologic data presented here do not allow us to distinguish between the lava dam or climate transition hypotheses but will need to be reconciled with any future proposed depositional model.

Arizona, California, Nevada↗

USGS2024

Using stable oxygen isotope dual-inlet isotope-ratio mass spectrometry to elucidate uranium transport and mixed 230Th/U calcite formation ages at the seminal Devils Hole, Nevada, natural laboratory

Rationale Vein calcite in Devils Hole has been precipitating continuously in oxygen-isotope equilibrium at a constant temperature for over 500 000 years, providing an unmatched δ 18 O paleoclimate time series. A substantial issue is that coeval calcite (based on matching δ 18 O values) has uranium-series ages differing by 12 000 years. Methods An unparalleled high-accuracy δ 18 O chronology series from continuously submerged calcite was used to correct the published uranium-series ages of non-continuously formed calcite in two cores, cyclically exposed by water-table decline during glacial–interglacial transitions. This method relies on the premise that the δ 18 O values of coevally precipitated calcite are identical, allowing matching calcite δ 18 O values to establish formation ages. Results Exposed calcite can have apparent ages that are 12 000 years too young due to unrecognized uranium mobility and resulting mixed ages identified in over 50 mixed uranium-series ages from previous studies. Secondary uranium in fluids, sourced from the formation or dissolution of porous carbonate deposits (folia) with high uranium-238 ( 238 U) concentrations, has migrated up to 10 mm into vein calcite. Conclusions The continuously submerged Devils Hole δ 18 O chronology is not explained by orbital forcing. Rather, this chronology represents a regional climate record in the southern Great Basin of sea-surface-temperature (SST) variations off California, variations that preceded the last and penultimate deglaciations by 5000 to approximately 10 000 years. Temporal discrepancies between the continuously submerged Devils Hole chronology and other regional δ 18 O records (e.g., the Leviathan chronology) can be explained by unrecognized cryptic, pernicious uranium mobility, leading to model estimations that may be thousands of years younger than actual ages. Consequently, paleo-moisture availability, water-table, and groundwater recharge models based on these mixed uranium-series ages are too young by as much as 12 000 years. The potential for post-formation uranium addition in subaerial cores and speleothems underscores the need for caution in uranium-series dating, highlighting δ 18 O time-series comparisons as a method for identifying mixed ages.

Nevada↗

USGS2025

lasertram: A Python library for time resolved analysis of laser ablation inductively coupled plasma mass spectrometry data

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) data has a wide variety of uses in the geosciences for in-situ chemical analysis of complex natural materials. Improvements to instrument capabilities and operating software have drastically reduced the time required to generate large volumes of data relative to previous methodologies. Raw data from LA-ICP-MS, however, is in counts per unit time (typically counts per second), not elemental concentrations and converting these count ratesto concentrations requires additional processing. For complex materials where the ablated volume may contain a range of material compositions, a moderate amount of user input is also required if appropriate concentrations are to be accurately calculated. In geologic materials such as glasses and minerals that potentially have numerous heterogeneities (e.g., microlites or other inclusions) within them, this is typically determiningwhether the total ablation signal should be filtered to remove these heterogeneities. This necessitates that the LA-ICP-MS data processing pipeline is one that is not automated, but is also designed to enable rapid and efficient processing of large volumes of data. Here we introduce , a Python library for the time resolved analysis of LA-ICP-MS data. We outline its mathematical theory, code structure, and provide an example of how it can be used to provide the time resolved analysis necessitated by LA-ICP-MS data of complex geologic materials. Throughout the pipeline we show how metadata and data are incrementally added to the objects created such that virtually any aspect of an experiment may be interrogated and its quality assessed. We also show, that when combined with other Python libraries for building graphical user interfaces, it can be utilized outside of a pure scripting environment. can be found at https://doi.org/10.5066/P1DZUR3Z

Applied Computing and Geosciences↗

USGS1986

Water-quality appraisal of NASQAN stations below impoundments, eastern Tennessee

The National Stream Quality Accounting Network (NASQAN) is a network of stations at which systematic and continuing water-quality data are collected. Major objectives of this U.S. Geological Survey program are (1) to depict areal variability of streamflow and water-quality conditions nationwide on a year-by-year basis and (2) to detect long-term changes in streamflow and stream quality. Several NASQAN stations in East Tennessee are downstream from impoundments which have a significant effect on water quality. NASQAN data obtained from the Tennessee River below Watts Bar Dam and the Clinch River below Melton Hill Dam were compared to water-quality data from the basins upstream. The comparison indicates that NASQAN data obtained below impoundment may not be adequate to describe a composite picture of water quality in the accounting unit. Detention time of storage in the impoundments is believed to moderate the range of constituent values observed at the NASQAN stations. Data obtained upstream and downstream from Watts Bar Dam indicate that the water sampled at the NASQAN station comes from stratified layers of the impoundment and is not representative of an integrated sample of water from the impoundment. Values of total recoverable iron suggest that, because of adsorption to sediments in impoundments, some constituents are not accurately described by sampling below impoundments. Relations between water-quality constituents and flow at stations on the Clinch River and Tennessee River are not well defined due to regulation. Direct load computations for many constituents were therefore not possible, which diminished the utility of data from these NASQAN stations to account for quantity versus quality of the water. Load computations were only possible for ionic constituents through use of a continuous specific-conductance record as an intermediary. Compensation for the effects of discharge prior to application of the Seasonal Kendall test for trends could not be done and identification of trends in water-quality constituents caused by some process (source) change was not possible. Some water-quality trends indicated by data from the Clinch and Tennessee Rivers might reflect the decreasing trend in discharge during the 1972-82 water years. Thus the stations below Watts Bar Dam and below Melton Hill Dam do not adequately meet the NASQAN objective to detect and assess long-term changes in stream quality.

Tennessee↗

USGS2024

Groundwater quality near the Placerita Oil Field, California, 2018

Groundwater-quality data and potential fluid-migration pathways near the Placerita Oil Field in Los Angeles County, California, were examined by the U.S. Geological Survey to determine if oil-field fluids (water and gas from oil-producing and non-producing zones) have mixed with groundwater resources. Six of the 13 new groundwater samples collected for this study contained petroleum hydrocarbons, thermogenic gas, inorganic chemical signatures, and (or) isotopic values consistent with potential mixing with fluids from hydrocarbon-bearing formations. For historical groundwater samples, benzene was the most detected petroleum hydrocarbon. The historical groundwater samples with a benzene concentration greater than 0.5 micrograms per liter were from environmental monitoring wells at industrial or commercial facilities unrelated to oil and gas development that, in many cases, have identified soil or groundwater contamination and were not typically analyzed for other constituents that could provide additional lines of evidence for potential mixing with oil-field fluids. Methane was not detected in any of the 12 historical samples with a reported measurement. Reviewing historical data revealed factors that could potentially adversely affect groundwater quality in the study area. These factors include modified hydraulic gradients caused by large volumes of water extracted from the main production area and reinjected downgradient into nonproducing zones, well-barrier failures in wells constructed in the northern part of the oil field before the 1970s, well-barrier failures in produced-water disposal wells downgradient from the main production area, and naturally occurring hydrocarbons at shallow intervals. The groundwater samples most geochemically similar to samples from hydrocarbon-bearing formations were in areas where hydrocarbons are naturally occurring at shallow intervals and where oil development is at shallow depths. Additional data for hydraulic heads, water quality, and formation temperatures at multiple depths in areas with large injection volumes and well-integrity issues are needed to evaluate whether those factors have contributed to mixing between fluids from oil-producing or injection formations and groundwater resources.

California↗

USGS2024

Thermo-hydrologic processes governing supra-permafrost talik dynamics in discontinuous permafrost near Umiujaq (Québec, Canada)

Widespread supra-permafrost talik formation is currently recognized as a critical mechanism that could accelerate permafrost thaw in the Arctic (e.g., Connon et al. 2018; Farquharson et al. 2022). However, the trajectory of permafrost dynamics following talik formation may prove difficult to predict. Physically-based cryohydrogeologic models provide a powerful tool for understanding processes and factors controlling talik dynamics and, ultimately, how permafrost will respond to climate change. Such models are typically used to represent multiple non-linear processes relevant for groundwater systems in cold regions, such as coupled heat and groundwater movement, including freeze-thaw dynamics and the effects on the surface energy balance and the subsurface thermal and hydraulic properties (Lamontagne-Hallé et al. 2020). Though cryohydrogeologic modeling advances have been made in simulating talik dynamics, few applications have been tested against robust long-term hydrometeorological and subsurface observations.

Quebec↗

USGS1976

The water quality of Livingston Reservoir on the Trinity River, Southeastern Texas

The concentrations of dissolved solids, chloride, and sulfate in Livingstone Reservoir on the Trinity River in southeastern Texas usually average less than 250 mg/1 (milligrams per litre), 40 mg/1, and 50 mg/1, respectively. The water is usually hard or moderately hard (61 to 180 mg/1 as calcium carbonate). The concentrations of principal dissolved constituents in the reservoir are usually maximum during summer and fall when evaporation is high and inflow is low. Thermal stratification of the reservoir usually begins in March and persists until September or October. Neither the seasonal variation of dissolved constituents in inflow to the reservoir nor thermal stratification has resulted in significant stratification of the principal dissolved constituents. However, thermal stratification has resulted in significant seasonal and areal variations of dissolved oxygen, which results in higher concentration of dissolved iron, dissolved manganese, total phosphorus, and total inorganic nitrogen.

Texas↗

USGS2024

Distinguishing natural sources from anthropogenic events in seismic data

As seismic data are increasingly used to investigate a diverse range of subsurface phenomena beyond regular fast-rupturing earthquakes (Peng and Gomberg, 2010; Beroza and Ide, 2011), it is important to acknowledge that human-generated ground vibrations may be mistaken for naturally generated subsurface processes (Larose et al., 2015; Li et al., 2018). Correct discrimination of natural processes from anthropogenic noise is especially pressing given the trend in seismic detection research toward automated algorithms and machine learning methods (Yoon et al., 2015; Kong et al., 2019;Mousavi and Beroza, 2022) and the growth in seismic data collection in new environments such as urban and industry settings (e.g., Díaz et al.,2017).

Seismological Research Letters↗

USGS2025

Rapid emplacement of the Keaiwa Lava Flow of 1823 from the Great Crack in the Southwest Rift Zone of Kilauea volcano

The Keaīwa Lava Flow of 1823 in the Southwest Rift Zone of Kīlauea volcano is unusual for its expansive pāhoehoe sheet flow morphology and lack of constructive vent topography, despite having a similar tholeiitic basalt composition to other lavas erupted from Kīlauea. This lava flow issued from a ∼10-km-long continuous fissure now known as the Great Crack, and has an unusually thin sheet flow morphology with margin thicknesses of ∼15–110 cm (average of 42 cm). Based on field observations of the lava flow at its fissure vent (e.g., drain-back features), we propose that the Great Crack formed, or at least significantly widened, just prior to and syn-eruptively with this 1823 eruption. The absence of pyroclastic cones or spatter ramparts indicates that the eruption consisted of a rapid outpouring of relatively degassed lava as the fissure unzipped. The rapidly moving lava flow overtopped pre-existing tumuli and scoria cones (e.g., Lava Plastered Cones) up to ∼10 m tall. Glass and whole-rock chemistry yield homogeneous compositions for the lavas erupted from the Great Crack, with glass compositions of 6.40 ± 0.10 wt% MgO and whole-rock compositions of 7.39 ± 0.07 wt% MgO. Lava pads erupted from a short western fissure system are richer in mafic minerals (e.g., olivine and clinopyroxene), and show slightly more MgO-rich whole-rock compositions (7.79 ± 0.05 wt%). MgO-in-glass thermometry on juvenile spatter yield eruption temperatures of 1153 ± 13°C that are typical of Kīlauea lavas. Thus, the extensive sheet-like lava flow morphology is not a direct consequence of unusual magmatic or rheological conditions (i.e., low viscosity). Instead, the flow morphology is associated with high effusion rates caused by sudden drainage of uprift magma as it erupted from the Great Crack. Lava flow modeling on a 2-m-resolution digital elevation model indicates that a minimum bulk effusion rate of ∼5800 m 3 /s (∼3500 m 3 /s dense rock equivalent) and a minimum flow velocity of ∼11 m/s are required for the lava flow to overcome the topography of the Lava Plastered Cones. This effusion rate is among the highest inferred for eruptions in Hawaiʻi and around the world. This study highlights a less frequent eruption style at Hawaiian volcanoes characterized by a sudden outpouring of lava from an unusual fissure system. Local eyewitness accounts indicate that the 1823 eruption was preceded by seismicity. Given the complex magmatic-volcanic-tectonic relations across Kīlauea, we speculate that the south flank could have slipped over one or more events that ultimately triggered unzipping of the Great Crack and passive release of briefly stored uprift magma. An eruption similar to 1823 at Kīlauea or Mauna Loa, with an eruptive timeframe that could be as short as an hour, with high effusion rates and rapid flow front velocities, would not easily allow for a timely response.

Hawaii↗

USGS2026

Spatially referenced watershed models for the binational Red–Assiniboine River Basin: Bayesian vs frequentist comparison

Excess nutrient loading remains a leading cause of declining water quality in lakes, estuaries, and coastal waters worldwide, with global economic costs of US$200 billion – US$2 trillion annually from impacts on fisheries, tourism, freshwater resources, and water treatment. Our study focuses on total phosphorus (TP) in Lake Winnipeg and its binational Red-Assiniboine River Basin, where nutrient inputs have degraded water quality and increased cyanobacterial blooms. These changes pose ecological, public health, and economic risks. We applied a spatially referenced watershed model with a hybrid statistical-mechanistic structure partitioning annual nutrient loads into land-use export, land-to-water delivery, and in-reservoir decay. Bayesian and traditional frequentist model calibrations were compared. In the frequentist model, coefficients for agricultural inputs, forests /wetlands, stream channels, precipitation, and reservoir losses were statistically significant, whereas coefficient for wastewater was not. In contrast, all variables were successfully calibrated using the Bayesian approach. Model results delineate TP-export hotspots across the basin, showing that 54–62% of TP originates from the U.S., with agricultural sources ranging 62–72%—highlighting the importance of agriculture-focused Best Management Practices. Given the global relevance of nutrient-driven water-quality challenges, our results highlight Bayesian calibration for robust risk assessment and adaptive nutrient management.

Red–Assiniboine River Basin↗

USGS2016

Sedimentary exhalative (sedex) zinc-lead-silver deposit model

This report draws on previous syntheses and basic research studies of sedimentary exhalative (sedex) deposits to arrive at the defining criteria, both descriptive and genetic, for sedex-type deposits. Studies of the tectonic, sedimentary, and fluid evolution of modern and ancient sedimentary basins have also been used to select defining criteria. The focus here is on the geologic characteristics of sedex deposit-hosting basins that contain greater than 10 million metric tons of zinc and lead. The enormous size of sedex deposits strongly suggests that basin-scale geologic processes are involved in their formation. It follows that mass balance constraints of basinal processes can provide a conceptual underpinning for the evaluation of potential ore-forming mechanisms and the identification of geologic indicators for ore potential in specific sedimentary basins. Empirical data and a genetic understanding of the physicochemical, geologic, and mass balance conditions required for each of these elements are used to establish a hierarchy of quantifiable geologic criteria that can be used in U.S. Geological Survey national assessments. In addition, this report also provides a comprehensive evaluation of environmental considerations associated with the mining of sedex deposits.

Scientific Investigations Report↗

USGS2025

Estimating the probability of export restrictions to inform mineral criticality

As demand for advanced technologies rises, mineral commodities will increase in geopolitical importance. To assess risks associated with mineral commodity supply chain disruptions, governmental agencies and others have developed "criticality" assessments, with criticality described using the economic impact and probability of supply chain disruptions. In previous work, subjective supply risk indicators were developed to approximate this probability, typically combining several factors such as supply diversity and political stability of trading partners, where indicator weightings can substantially impact results. This work explicitly quantifies trade barrier probability using an ensemble of several machine learning classifiers, with probability estimates informed by exogenous variables such as prior trade barrier implementation and global export dominance. Major differences in the high-probability countries and commodities are observed across models, but the ensemble method highlights Indonesia, China, Tanzania, and the United States as particularly high risk. This approach enables a direct, quantitative, objective approach to assessing trade barrier probability, enhancing risk identification and prioritization for policymakers.

SSRN↗

USGS2026

Effects of human activity on Khumbu Glacier: Towards a sustainable Everest Base Camp

The Everest Base Camp (EBC), a critical staging area for mountaineers attempting to summit Mount Everest, has seen a significant increase in human activity over the past few decades. The increasing number of climbers, trekkers, and support staff, particularly at the campsite area, has intensified environmental impacts on the Khumbu Glacier. This study investigates the effects of human activity at EBC, focusing on three contributors to glacier melt: global climate change, local fossil fuel consumption, and human urinary discharge. Through field data collected during the spring 2023 climbing season, this study examines the energy released through the use of liquefied petroleum gas (LPG), kerosene, and petrol for cooking, heating, and electricity, as well as the heat generated by human urinary discharge. The total heat energy released from these activities at EBC in the spring of 2023 was 849,174 ± 179,774 MJ, which would be sufficient to melt 2492 ± 528 tons of glacier ice and snow. Trends in land surface temperature at EBC and adjacent environments during the 1991–2023 period were calculated from Landsat 5, 7, and 9 satellite data. The 32-year Landsat record reveals that EBC surface temperature increased by 0.28 °C year −1 , which was roughly twice the rate of warming at the surface of Khumbu Glacier adjacent to EBC and about 15% higher than the temperature increase of the debris-covered terrain immediately to the north of EBC. The findings suggest that addressing these anthropogenic influences could help to preserve the Khumbu Glacier and support the sustainability of mountaineering in the region. This paper also takes a transformative approach and explores stable and safer locations in case there is a necessity to relocate the current EBC. Two sites have been identified southwest of the existing EBC, which, unlike the current supraglacial site, are situated on stable ground.

Everest Base Camp, Khumbu Glacier↗

USGS2026

Potential impacts of groundwater pumping on stream temperature are greatest in streams with substantial cold groundwater inflows

Groundwater pumping-induced reductions in streamflow (known as ‘streamflow depletion’) have been documented worldwide, but potential impacts of streamflow depletion on stream temperature are not well understood. Here, we use two types of models to identify potential impacts of pumping on stream temperature across the conterminous United States (CONUS) to determine which aspects of a stream's annual thermograph (thermal signatures) can be used to monitor and manage streamflow depletion impacts on stream temperature. We used long-term streamflow and stream temperature data from 30 streamgages across CONUS and surrogate models of streamflow depletion to analyse potential stream temperature impacts at each site. We compared two different stream temperature modelling approaches: (i) a process-based energy balance model and (ii) statistical regression models based on air temperature and stream discharge. We calculated a suite of thermal signatures under depleted and non-depleted conditions for each stream and found that maximum annual 7-day temperature and annual temperature range are potentially the most sensitive to streamflow depletion, with potential changes of at least 2°C at > 70% of the sites when using the process-based model. We also found that the regression-based models predicted much less sensitivity of stream temperature to streamflow depletion than the process-based model. This work provides an initial evaluation and sensitivity analysis of the potential impacts of streamflow depletion on stream temperature. We demonstrate that stream temperature may be most sensitive to pumping in streams with a high proportion of flow sourced from relatively cold groundwater inputs, and that regression-based stream temperature models may underpredict stream temperature changes caused by streamflow depletion.

conterminous United States↗

USGS2024

Following the tug of the audience from complex to simplified hazards maps at Cascade Range volcanoes

Volcano-hazard maps are broadly recognized as important tools for forecasting and managing volcanic crises and for disseminating spatial information to authorities and people at risk. As scientists, we might presume that hazards maps can be developed at the time and with the methods of our discretion, yet the co-production of maps with stakeholder groups, who have programmatic needs of their own, can sway the timing, usability, and acceptance of map products. We examine two volcano hazard map-making efforts by staff at the U.S. Geological Survey. During the 1990s and early 2000s scientists developed a series of hazard assessments and maps with detailed zonations for volcanoes in Washington and Oregon. In 2009, the National Park Service expressed the need for simplified versions of the existing hazard maps for a high-profile visitor center exhibit. This request created an opportunity for scientists to rethink the objectives, scope, content, and map representations of hazards. The primary focus of this article is a discussion of processes used by scientists to distill the most critical information within the official parent maps into a series of simplified maps using criteria specified. We contextualize this project with information about development of the parent maps, public response to the simplified hazard maps, the value of user engagement in mapmaking, and with reference to the abundance of guidance available to the next generation of hazard-mapmakers. We argue that simplified versions of maps should be developed in tandem with any hazard maps that contain technical complexities, not as a replacement, but as a mechanism to broaden awareness of hazards. We found that when scientists endeavor to design vivid and easy-to-understand maps, people in many professions find uses for them within their organization’s information products, resulting in extensive distribution.

Washington↗

USGS2026

Quantitative mineral resource assessment of lithium pegmatite deposits in the southern Appalachian orogen

The first quantitative mineral resource assessment for undiscovered lithium pegmatite deposits in the southern Appalachian region of the United States was conducted. Permissive tracts for lithium pegmatite deposits were delineated by integrating lithological, tectonic, geochemical, geophysical and mineral occurrence data. Lithium pegmatite prospectivity of the tracts was ranked with simplified mappable criteria, including proximity to Paleozoic felsic intrusions and major lithotectonic structures, stream sediment geochemical anomalies, and pegmatite occurrence data. The geospatial data and permissive tracts were used to estimate the number of undiscovered lithium pegmatite deposits. These estimates were integrated into probabilistic simulations along with a new global lithium pegmatite grade and tonnage dataset to quantify potential contained undiscovered lithium resources. An economic filter was applied to convert the probabilistic estimates of contained lithium into recoverable material. The identified lithium pegmatite resources for the Carolina Lithium and Kings Mountain deposits, North Carolina, contain 1589 thousand tons (kt) of Li 2 O. The median contained undiscovered resource for the southern Appalachian orogen was estimated to be 2240 kt Li 2 O. At 90% confidence, the region contains at least 130 kt Li 2 O, and 10,700 kt at 10% confidence. After applying economic filters, the median recoverable contained resource was 1430 kt Li 2 O, corresponding to approximately 201 years of current lithium imports for consumption in the United States. North and South Carolina are likely to contain most of these resources. Coarse data resolution and intra-state variations in the geological data contribute to uncertainty of undiscovered lithium pegmatite resources. Continued efforts to harmonize disparate geospatial datasets with updated or new information can improve the accuracy and precision of estimated undiscovered lithium pegmatite resources in the study area and at broader scales.

Alabama, Georgia, Maryland, North Carolina, South ↗

USGS1996

Analysis of nutrients in the surface waters of the Georgia–Florida Coastal Plain study unit, 1970–91

During the early phase of the Georgia-Florida National Water Quality Assessment study, existing information on nutrients was compiled and analyzed in order to evaluate the nutrient concentrations within the 61,545 square mile study unit. Evaluation of the nutrient concentrations collected at surface-water sites between October 1, 1970, and September 30, 1991, utilized the environmental characteristics of land resource provinces, land use, and nonpoint and point-source discharges within the study unit. Long-term trends were investigated to determine the temporal distribution of nutrient concentrations. In order to determine a level of concern for nutrient concentrations, the U.S. Environmental Protection Agency (USEPA) guidelines were used: (1) for nitrate concentrations, the maximum contaminant level in public-drinking water supplies (10 mg/L); (2) for ammonia concentrations, the chronic exposure of aquatic organisms to un-ionized ammonia (2.1 mg/L); (3) for total-phosphorus concentrations, the recommended concentration in flowing water to discourage excessive growth of aquatic plants (0.1 mg/L); and (4) for kjeldahl concentrations, however, no guidelines were available. For sites within the 10 major river basins, median nutrient concentrations were enerally below USEPA guidelines, except for total-phosphorus concentrations where 45 percent of the medians exceeded the guideline. The only median ammonia concentration that exceeded the guideline occurred at the Swift Creek site (3.4 mg/L), in the Suwannee River basin, perhaps due to wastewater discharges. For all sites within the Withlacoochee, Aucilla, and St. Marys River basins, median concentrations of nitrate, ammonia, and total phosphorus were below the USEPA guidelines. Nutrient data at each monitoring site within each major basin were aggregated for comparisons of median nutrient concentrations among major basins. The Ochlockonee and Hillsborough River basins had the highest median nutrient concentrations, the Aucilla River basin had the lowest. Median concentrations of nitrate and ammonia among all major basins were below USEPA guidelines. The median total-phosphorus concentrations for the following river basins exceeded the USEPA guideline: Hillsborough, St. Johns, Suwannee, Ochlockonee, Satilla, Altamaha, and Ogeechee. Although nutrient concentrations within the study unit were low, long-term increasing trends were found in all four nutrients. All 18 study-unit wide nitrate trends had increasing slopes ranging from less than 0.01 to 0.07 (mg/L)/yr. The range in slope for the 13 ammonia trends was -0.03 to 0.01 (mg/L)/yr with 6 increasing trends in the northern part of the study unit. Of the 17 total-phosphorus trends found in the study unit, 10 were found at sites where the median concentration exceeded the USEPA guideline. At these 10 sites, 4 sites had increasing trends with slopes ranging from less than 0.01 to 0.07 (mg/L)/yr, 5 sites had decreasing trends with slopes ranging from -0.01 to -0.24 (mg/L)/yr, and one site showed a seasonal concentration trend. Median nutrient concentrations were significantly different among the four land resource provinces: Southern Piedmont, Southern Coastal Plain, Coastal Flatwoods, and Central Florida Ridge. As a result, nutrient concentrations among basins with similar nutrient inputs but located within different land resource provinces are not expected to be the same due to differences in the combination of factors such as soil permeability, runoff rates, and stream channel slopes. This concept is an important consideration in designing a surface-water quality network within the study area. For the most part, the Coastal Flatwoods showed the lowest median nutrient concentrations and the Southern Coastal Plain had the highest median nutrient concentrations. Lower median nitrate concentrations in surface-water basins were associated with the forest/wetland land-use category and higher median concentrations of nitrate and ammonia with the urban category when land-use percentages were classified into four land-use categories (agriculture, forest/wetland, mixed, and urban). These results were reasonable based on expected high nutrient inputs from urban areas and low inputs from forested and wetland areas. However, the lack of association between high nutrient concentrations and the agricultural land-use category was not expected since high nutrient inputs are generally needed for agriculture production.

Florida, Georgia↗

USGS2026

PFAS remediation in a bioelectrochemical system inoculated with the west branch consortium (WBC-2)

Groundwater contamination by per - and polyfluoroalkyl substances (PFAS) poses a persistent environmental and public health concern. This study evaluates a two-chambered bioelectrochemical system (BES) inoculated with the West Branch Consortium (WBC-2) for PFAS remediation. Under an applied cathodic potential of −450 mV (versus Ag/AgCl), the BES with active WBC-2 achieved >99.0% perfluorooctanesulfonic acid (PFOS) removal within 21 days in deionized water with culture medium and > 98.9% removal of PFOS, perfluorooctanoic acid (PFOA), perfluorohexanoic acid (PFHxA), and perfluorohexanesulfonic acid (PFHxS) in contaminated groundwater after 102 days. Intermediate formation (e.g., PFOA, 6:2 fluorotelomer sulfonate (6:2 FTS), perfluoropropionic acid (PFPrA), perfluorobutanoic acid (PFBA)) and background-corrected fluoride release were consistent with PFOS transformation under anaerobic reducing conditions potentially involving defluorination. Following repeated PFOS spikes (100 μg/L on Days 0, 50, and 399), PFOA, PFPrA, and PFBA accumulated over 664 days. Despite being the dominant accumulated compound, PFOA accounted for <1.8% of the total spiked PFOS mass. Minimal PFOS transformation occurred in controls without active WBC-2, highlighting the importance of microbial metabolism. Biofilm analysis revealed dense colonization of rod-shaped bacteria on carbon fiber brushes. Enrichment of Bacillus , Agrobacterium , and other low-abundance taxa suggests selective adaptation to BES and PFAS conditions. These findings highlight BES driven by electrochemically stimulated microbial activity as a promising strategy for PFAS remediation.

Journal of Water Process Engineering↗