USGS Science⌕ Search

SEARCH · USGS Science

Results for “Surveys in Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75Linked to original sources

1989 Exclusive Economic Zone symposium: Summary and recommendations

The fourth in a series of biennial national Exclusive Economic Zone symposia was held on November 14–16, 1989 . The purpose of the meeting was to examine ongoing and planned mapping and research activities in the ocean waters of the United States. Approximately 220 individuals attended the meeting. Issues discussed related to digital seafloor mapping projects, cooperative federal‐state programs, and requirements for additional data and information. Symposium recommendations included the need for increased surveying in coastal waters, development of standards for digital data dissemination, increased coordination with coastal states and federal agencies, and additional geophysical measurement systems abroad all mapping ships.

Marine Geodesy↗

Design and application of an electromagnetic vibrator seismic source

Vibrational seismic sources frequently provide a higher-frequency seismic wavelet (and therefore better resolution) than other sources, and can provide a superior signal-to-noise ratio in many settings. However, they are often prohibitively expensive for lower-budget shallow surveys. In order to address this problem, I designed and built a simple but effective vibrator source for about one thousand dollars. The "EMvibe" is an inexpensive electromagnetic vibrator that can be built with easy-to-machine parts and off-the-shelf electronics. It can repeatably produce pulse and frequency-sweep signals in the range of 5 to 650 Hz, and provides sufficient energy for recording at offsets up to 20 m. Analysis of frequency spectra show that the EMvibe provides a broader frequency range than the sledgehammer at offsets up to ??? 10 m in data collected at a site with soft sediments in the upper several meters. The EMvibe offers a high-resolution alternative to the sledgehammer for shallow surveys. It is well-suited to teaching applications, and to surveys requiring a precisely-repeatable source signature.

Journal of Environmental & Engineering Geophysics↗

Geohydrology of Recharge and Seawater Intrusion in the Pajaro Valley, Santa Cruz and Monterey Counties, California

The U.S. Geological Survey (USGS) in cooperation with the Pajaro Valley Water Management Agency (PVWMA), has completed the collection and analyses of geologic, hydrologic, geophysical, and geochemical data in the coastal aquifer systems of the Pajaro Valley (fig. 1). These data were collected to delineate the geohydrologic framework of seawater intrusion, as well as, the source, age, and movement of ground water in the coastal aquifer systems (Hanson, 2003).

Fact Sheet↗

Audiomagnetotelluric data to characterize the Revett-type copper-silver deposits at Rock Creek in the Cabinet Mountains Wilderness, Montana

The Revett-type deposits at Rock Creek are part of the concealed stratabound copper-silver deposits located in the Cabinet Mountains Wilderness of Montana. The U.S. Geological Survey is conducting a series of multidisciplinary studies as part of the Assessment Techniques for Concealed Mineral Resources project. Geologic, geochemical, geophysical, and mineral resources data are being evaluated with existing and new mineral deposit models to predict the possibility and probability of undiscovered deposits in covered terranes. To help characterize the size, resistivity, and depth of the mineral deposit concealed beneath thick overburden, a regional southwest-northeast audiomagnetotelluric sounding profile was acquired. Further studies will attempt to determine if induced polarization parameters can be extracted from the magnetotelluric data to determine the size of the mineralized area. The purpose of this report is to release the audiomagnetotelluric sounding data collected along that southwest-northeast profile. No interpretation of the data is included.

Montana↗

High-resolution seismic-reflection profiles collected by the R/V James M. Gilliss, cruise GS 7903-4, in the Baltimore Canyon outer continental shelf area, offshore New Jersey

High-resolution seismic-reflection profiles were collected by the U.S. Geological Survey (USGS) aboard R/V JAMES M. GILLIS (cruise GS 7903-4) from 27 June to 11 July 1979 over the Continental Slope of the Eastern United States between Lindenkohl and Hudson Canyons. These data were acquired as part of a study to determine potential geologic hazards to petroleum development of the Baltimore Canyon trough area. On this cruise, the Continental Slope between Carteret and South Toms Canyons was surveyed along lines spaced one-half nautical mile apart to study the size and distribution of mass-wasting features as a guide to assess the importance of mass-wasting processes on the Continental Slope. The seimsic-reflection profiles were placed to complement other data gathered previously by the USGS and to continue a survey grid begun in 1978 aboard the R/V COLUMBUS !SELIN, cruise CI 7807-1. Track-line distances totaled 1,555 km of 40-in3 air-gun (with wave shaper) profiles, 1, 750 km of 800-J sparker data, and 1,780 km of 3 .5-kHz data. All data are of high quality. A side-scan sonar system was operated briefly along the uppermost Continental Slope to acquire data over 70 km of ship's track. In addition, experimental profiling data were collected from a hydrophone towed at depth over the midslope on the end of the side-scan cable; the surface-towed sparker was used as a sound source. High-resolution profiles were collected by this method over 105 km of track. Navigation was by Loran-C (5-minute fix interval) and satellite. The original data may be inspected at the offices of the U.S. Geological Survey in Woods Hole, Massachusetts 02543. Microfilm copies of the data from this cruise are available for purchase from the National Geophysical and Solar-Terrestrial Data Center (NGSDC), Boulder, Colorado 80303.

Open-File Report↗

Hydrogeologic and geochemical characteristics of the Ogallala and White River aquifers, Cheyenne, Wyoming

The Ogallala aquifer and the underlying White River aquifer are important ground-water resources of public and private drinking water in the Cheyenne, Wyoming area. In 1997, as part of a cooperative project between the Cheyenne Board of Public Utilities and the U.S. Geological Survey, a well was installed to develop information for those two aquifers. Information provided for the Ogallala aquifer included core descriptions, geophysical logs, water levels, aquifer transmissivity, water quality, isotopic analysis, and geochemical modeling. Information for the White River aquifer was limited to core descriptions and geophysical logs.Evaluation of the core obtained from the drill hole showed the sediments to be primarily sands, silts, and clays. The thickness of the Ogallala Formation at the well site was estimated to be 246 feet. Water levels and precipitation from October 1, 1998 to September 30, 1999 indicated that water levels responded to precipitation. During that time, water levels ranged from 6,002.41 feet to 6,004.27 feet above mean sea level. The transmissivity was estimated to be 1.1 feet squared/day. The temperature differences between the municipal water and the Ogallala aquifer water were examined in relation to selected hydraulic conductivities and it was found that the warmer municipal water would slightly increase the hydraulic conductivity if the water were injected into the Ogallala aquifer.The water quality of a sample from the Ogallala 1 well indicated the predominant major ions were calcium, magnesium, and bicarbonate. Isotopic analyses of hydrogen-2, tritium, chlorine-36, carbon-14, and carbon-13 indicated the water was a mixture of pre- and post-1953 recharge. A simple geochemical mixing model indicated there was the potential for dissolution of anhydrite, calcite, gypsum, and dolomite and precipitation of goethite, hematite, pyrolusite, and amorphous ferric hydroxide if municipal and Ogallala aquifer waters were mixed.

Water-Resources Investigations Report↗

Porphyry copper exploration model for northern Sonora, Mexico

The regional tectonic pattern of the porphyry copper province of northern Sonora, Mexico, is similar to, but more complex than, the Colorado mineral belt. Four northeast-trending shear zones, spaced at 30- to 50-kilometer intervals from Hermosillo, Mexico, north to Nogales, Mexico, are interpreted from analysis of lineament data from Landsat-1 images. From comparison with other areas, these zones are believed to have Precambrian ancestry. North-northwest-trending lineaments, which commonly occur along range fronts, are interpreted to be the principal basin and range faults. North-south- and west-northwest-trending lineaments are believed to be related to lesser faults and fractures. Areas of hydrothermal alteration have been mapped on a regional scale by use of digital image-processing techniques. These altered areas occur on the flanks of the northeast-trending shear zones, generally near intersections with north-northwest-trending lineaments. This tectonic framework with associated alteration is similar to patterns in the Colorado Plateau, the porphyry copper province of Arizona, and central Mexico and is supported by relationships found in limited local mapping. The pattern of northeast-trending shear zones and north-northwest-trending faults in northern Sonora closely resembles the tectonic framework of the Colorado mineral belt. The younger sedimentary and volcanic cover, however, has not been eroded in Sonora as it has been in the Colorado mineral belt. This comparison with the Colorado mineral belt suggests that mineral deposits are most likely to be found in altered areas where a northeast-trending shear zone is intersected by north-northwest-trending faults. Seven areas with these characteristics have been defined in Sonora and are being evaluated by means of regional geophysical and geochemical data.

Sonora↗

A three-dimensional geophysical model of the crust in the Barents Sea region: Model construction and basement characterization

BARENTS50, a new 3-D geophysical model of the crust in the Barents Sea Region has been developed by the University of Oslo, NORSAR and the U.S. Geological Survey. The target region comprises northern Norway and Finland, parts of the Kola Peninsula and the East European lowlands. Novaya Zemlya, the Kara Sea and Franz-Josef Land terminate the region to the east, while the Norwegian-Greenland Sea marks the western boundary. In total, 680 1-D seismic velocity profiles were compiled, mostly by sampling 2-D seismic velocity transects, from seismic refraction profiles. Seismic reflection data in the western Barents Sea were further used for density modelling and subsequent density-to-velocity conversion. Velocities from these profiles were binned into two sedimentary and three crystalline crustal layers. The first step of the compilation comprised the layer-wise interpolation of the velocities and thicknesses. Within the different geological provinces of the study region, linear relationships between the thickness of the sedimentary rocks and the thickness of the remaining crystalline crust are observed. We therefore, used the separately compiled (area-wide) sediment thickness data to adjust the total crystalline crustal thickness according to the total sedimentary thickness where no constraints from 1-D velocity profiles existed. The BARENTS50 model is based on an equidistant hexagonal grid with a node spacing of 50 km. The P -wave velocity model was used for gravity modelling to obtain 3-D density structure. A better fit to the observed gravity was achieved using a grid search algorithm which focussed on the density contrast of the sediment-basement interface. An improvement compared to older geophysical models is the high resolution of 50 km. Velocity transects through the 3-D model illustrate geological features of the European Arctic. The possible petrology of the crystalline basement in western and eastern Barents Sea is discussed on the basis of the observed seismic velocity structure. The BARENTS50 model is available at http://www.norsar.no/seismology/barents3d/ .

Geophysical Journal International↗

Identifying hydraulically conductive fractures with a slow-velocity borehole flowmeter

The U.S. Geological Survey used a recently developed heat-pulse flowmeter to measure very slow borehole axial water velocities in granitic rock at a site near Lac du Bonnet, Manitoba, Canada. The flowmeter was used with other geophysical measurements to locate and identify hydraulically conducting fractures contributing to the very slow vertical water flow in the two boreholes selected for study. The heat-pulse flowmeter has no moving parts and operates on the tag–trace principle. It is an improved version of the flowmeter developed by the Water Research Centre in England in 1975. The U.S. Geological Survey's heat-pulse flowmeter has a flow-measuring range in water of 0.06–6 m/min, and can resolve velocity differences as slow as 0.01 m/min. This is an order of magnitude slower than the stall speed of spinner flowmeters. The flowmeter is 1.16 m long and 44 mm in diameter. It was calibrated in columns of 76 and 152 mm diameter, to correspond to the boreholes studied. The heat-pulse flowmeter system is evaluated, and problems peculiar to the measurement of very slow axial water velocities in boreholes are discussed. Key words : flowmeter, borehole flow, low flow, borehole geophysics.

Manitoba↗

Hydrologic conditions, stream-water quality, and selected groundwater studies conducted in the Lawrenceville area, Georgia, 2003-2008

Hydrologic studies conducted during 2003-2008 as part of the U.S. Geological Survey Cooperative Water Program with the City of Lawrenceville, Georgia, provide important data for the management of water resources. The Cooperative Water Program includes (1) hydrologic monitoring (precipitation, streamflow, and groundwater levels) to quantify baseline conditions in anticipation of expanded groundwater development, (2) surface-water-quality monitoring to provide an understanding of how stream quality is affected by natural (such as precipitation) and anthropogenic factors (such as impervious area), and (3) geologic studies to better understand groundwater flow and hydrologic processes in a crystalline rock setting. The hydrologic monitoring network includes each of the two watersheds projected for groundwater development?the Redland-Pew Creek and upper Alcovy River watersheds?and the upper Apalachee River watershed, which serves as a background or control watershed because of its similar hydrologic and geologic characteristics to the other two watersheds. In each watershed, precipitation was generally greater during 2003-2005 than during 2006-2008, and correspondingly streamflow and groundwater levels decreased. In the upper Alcovy River and Redland-Pew Creek watersheds, groundwater level declines during 2003-2008 were mostly between 2 and 7 feet, with maximum observed declines of as much as 28.5 feet in the upper Alcovy River watershed, and 49.1 feet in the Redland-Pew Creek watershed. Synoptic base-flow measurements were used to locate and quantify gains or losses to streamflow resulting from groundwater interaction (groundwater seepage). In September 2006, seepage gains were measured at five of nine reaches evaluated in the upper Alcovy River watershed, with losses in the other four. The four losing reaches were near the confluence of the Alcovy River and Cedar Creek where the stream gradient is low and bedrock is at or near the land surface. In the Redland-Pew Creek watershed, groundwater seepage gains were observed at each of the 10 reaches measured during September 2008. Continuous specific conductance, temperature, and turbidity data were collected at gage sites located on Pew and Shoal Creeks, which drain about 32 percent of the city area, and at a background site on the Apalachee River located outside the city boundary. Continuous surface-water monitoring data indicate that reduced precipitation during 2006-2008 resulted in lower turbidity and higher stream temperature and specific conductance than in 2003-2005. In comparison to the other two stream sites, water at the Apalachee River site had the lowest mean and median values for specific conductance, and the greatest mean and median values for turbidity during October 2005-December 2008. In addition to continuous water-quality monitoring, samples were collected periodically to determine fecal-coliform bacteria concentrations. None of the individual samples at the three sites exceeded the Georgia Environmental Protection Division (GaEPD) limit of 4,000 most probable number of colonies per 100 milliliters (MPN col/100 mL) for November through April. In the Redland-Pew Creek and Shoal Creek watersheds, the GaEPD 30-day geometric mean standard of 200 MPN col/100 mL for May-October was exceeded twice during two sampling periods in May-October 2007 and twice during two sampling periods in May-October 2008. Groundwater studies conducted during 2003-2007 include the collection of borehole geophysical logs from four test wells drilled in the upper Alcovy River watershed to provide insight into subsurface geologic characteristics. A flowmeter survey was conducted in a well south of Rhodes Jordan Park to help assess the interconnection of the well with surface water and the effectiveness of a liner-packer assembly installed to eliminate that interconnection. At that same well, hydraulic packer tests were conducted in the open-hole section of the well, and water samp

Georgia↗

Preliminary Gravity and Ground Magnetic Data in the Arbuckle Uplift near Sulphur, Oklahoma

Improving knowledge of the geology and geophysics of the Arbuckle Uplift in south-central Oklahoma is a goal of the Framework Geology of Mid-Continent Carbonate Aquifers project sponsored by the United States Geological Survey (USGS) National Cooperative Geologic Mapping Program (NCGMP). In May 2007, we collected ground magnetic and gravity observations in the Hunton Anticline region of the Arbuckle Uplift, near Sulphur, Oklahoma. These observations complement prior gravity data collected for a project sponsored by the National Park Service and helicopter electromagnetic (HEM) and aeromagnetic data collected in March 2007 for the NCGMP project. This report describes the instrumentation and processing that was utilized in the May 2007 geophysical fieldwork, and it presents preliminary results as gravity anomaly maps and magnetic anomaly profiles. Digital tables of gravity and magnetic observations are provided as a supplement to this report. Future work will generate interpretive models of these anomalies and will involve joint analysis of these ground geophysical measurements with airborne and other geophysical and geological observations, with the goal of understanding the geological structures influencing the hydrologic properties of the Arbuckle-Simpson aquifer.

Open-File Report↗

Hydrogeology and extent of saltwater intrusion on Manhasset Neck, Nassau County, New York

Manhasset Neck, a peninsula on the northern shore of Long Island, N.Y., is underlain by unconsolidated deposits that form a sequence of aquifers and confning units. Ground water at several public-supply wells has been affected by the intrusion of saltwater from the surrounding embayments (Manhasset Bay, Long Island Sound, Hempstead Harbor). Twenty-two boreholes were drilled during 1992-96 for the collection of hydrogeologic, geochemical, and geophysical data to delineate the subsurface geology and the extent of saltwater intrusion within the peninsula. A series of continuous high-resolution seismic- reflection surveys was completed in 1993 and 1994 to delineate the character and extent of the hydrogeologic deposits beneath the embayments surrounding Manhasset Neck. The new drill-core data indicate two hydrogeologic units--the North Shore aquifer and the North Shore confining unit--where the Lloyd aquifer, Raritan confining unit, and the Magothy aquifer have been completely removed by glacial erosion. Water levels at selected observation wells were measured quarterly throughout the study. These data, and continuous water-level records, indicate that (1) the upper glacial (water-table) and Magothy aquifers are hydraulically connected and that their water levels do not respond to tidal fluctuations, and (2) the Lloyd and North Shore aquifers also are hydraulically connected, but their water levels do respond to pumping and tidal fluctuations. Offshore seismic-reflection surveys in the surrounding embayments, and drill-core samples, indicate at least four glacially eroded buried valleys with subhorizontal, parallel reflectors indicative of draped bedding that is interpreted as infilling by silt and clay. The buried valleys (1) truncate the surrounding coarse-grained deposits, (2) are asymmetrical and steep sided, (3) trend northwest-southeast, (4) are 2 to 4 miles long and about 1 mile wide, and (5) extend to more than 400 feet below sea level. Water from 12 public-supply wells screened in the Magothy and upper glacial aquifers contained volatile organic compounds in concentrations above the New York State Department of Health Drinking Water maximum contaminant levels, as did water from one public- supply well screened in the Lloyd aquifer and from two observation wells screened in the upper glacial aquifer. Five distinct areas of saltwater intrusion have been delineated in Manhasset Neck; three extend into the Lloyd and North Shore aquifers, and two extend into the upper glacial and Magothy aquifers. Borehole-geophysical-logging data indicate that several of these saltwater wedges range from a few feet to more than 125 feet in thickness and have sharp freshwater-saltwater interfaces, and that chloride concentrations within these wedges in 1997 ranged from 102 to 9,750 milligrams per liter. Several public-supply wells have either been shut down or are currently being affected by these saltwater wedges. Data show active saltwater intrusion in at least two of the wedges.

New York↗

Quantification of aquifer properties with surface nuclear magnetic resonance in the Platte River valley, central Nebraska, using a novel inversion method

Surface nuclear magnetic resonance, a noninvasive geophysical method, measures a signal directly related to the amount of water in the subsurface. This allows for low-cost quantitative estimates of hydraulic parameters. In practice, however, additional factors influence the signal, complicating interpretation. The U.S. Geological Survey, in cooperation with the Central Platte Natural Resources District, evaluated whether hydraulic parameters derived from surface nuclear magnetic resonance data could provide valuable input into groundwater models used for evaluating water-management practices. Two calibration sites in Dawson County, Nebraska, were chosen based on previous detailed hydrogeologic and geophysical investigations. At both sites, surface nuclear magnetic resonance data were collected, and derived parameters were compared with results from four constant-discharge aquifer tests previously conducted at those same sites. Additionally, borehole electromagnetic-induction flowmeter data were analyzed as a less-expensive surrogate for traditional aquifer tests. Building on recent work, a novel surface nuclear magnetic resonance modeling and inversion method was developed that incorporates electrical conductivity and effects due to magnetic-field inhomogeneities, both of which can have a substantial impact on the data. After comparing surface nuclear magnetic resonance inversions at the two calibration sites, the nuclear magnetic-resonance-derived parameters were compared with previously performed aquifer tests in the Central Platte Natural Resources District. This comparison served as a blind test for the developed method. The nuclear magnetic-resonance-derived aquifer parameters were in agreement with results of aquifer tests where the environmental noise allowed data collection and the aquifer test zones overlapped with the surface nuclear magnetic resonance testing. In some cases, the previously performed aquifer tests were not designed fully to characterize the aquifer, and the surface nuclear magnetic resonance was able to provide missing data. In favorable locations, surface nuclear magnetic resonance is able to provide valuable noninvasive information about aquifer parameters and should be a useful tool for groundwater managers in Nebraska.

Nebraska↗

Summary of the mineral- and energy-resource endowment, BLM roswell resource area, east-central New Mexico

In this summary of two comprehensive resource reports produced by the U.S. Bureau of Mines and the U.S. Geological Survey for the U.S. Bureau of Land Management, we discuss the mineral- and energyresource endowment of the 14-millon-acre Roswell Resource Area, New Mexico, managed by the Bureau of Land Management. The Bureau and Survey reports result from separate studies that are compilations of published and unpublished data and integrate new findings on the geology, geochemistry, geophysics, mineral, industrial, and energy commodities, and resources for the seven-county area. The reports have been used by the Bureau of Land Management in preparation of the Roswell Resource Area Resource Management Plan, and will have future use in nationwide mineral- and energy-resource inventories and assessments, as reference and training documents, and as public-information tools. In the Roswell Resource Area, many metals, industrial mineral commodities, and energy resources are being, or have been, produced or prospected. These include metals and high-technology materials, such as copper, gold, silver, thorium, uranium and/or vanadium, rare-earth element minerals, iron, manganese, tungsten, lead, zinc, and molybdenum; industrial mineral resources, including barite, limestone/dolomite, caliche, clay, fluorspar, gypsum, scoria, aggregate, and sand and gravel; and fuels and associated resources, such as oil, gas, tar sand and heavy oil, coal, and gases associated with hydrocarbons. Other commodities that have yet to be identified in economic concentrations include potash, halite, polyhalite, anhydrite, sulfur, feldspar, building stone and decorative rock, brines, various gases associated with oil and gas exploration, and carbon dioxide. ?? 1993 Oxford University Press.

Nonrenewable Resources↗