USGS Science⌕ Search

SEARCH · USGS Science

Results for “Southeastern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75Linked to original sources

Boron isotope systematics of tourmaline formation in the Sullivan Pb-Zn-Ag deposit, British Columbia, Canada

We report here the results of 54 boron isotope analyses of tourmaline associated with the giant Sullivan Pb-Zn-Ag deposit in southeastern British Columbia, Canada. The ??11B values range from -11.1 to -2.9???, which is almost as great as the range found worldwide in tourmalines from 33 massive sulfide deposits and tourmalinites in dominantly clastic metasedimentary terranes. The major control on the overall ??11B values of the Sullivan tourmalinites is the boron source. Potential controls over the large range of the data also include: (1) differences in formation temperatures of the tourmalinites, (2) different stages of tourmaline formation, (3) variations in the proportions of dissolved boron incorporated into the tourmaline (Rayleigh fractionation), (4) seawater entrainment, and (5) post-depositional metamorphism. The boron isotope data at Sullivan are consistent with boron derivation from leaching of footwall clastic sediments. However, the great abundance of tourmaline in the Sullivan deposit suggests that the local clastic sediments were not the sole source of boron, and we argue that non-marine evaporites, buried deep below the orebody, are the most viable source of this additional boron. It is likely that some of the variation in tourmaline ??11B values reflect mixing of boron from these two sources. Comparison of the potential effects of these controls with geologic and other geochemical evidence suggests that major causes for the wide range of ??11B values measured at Sullivan are seawater entrainment and Rayleigh fractionation, although in places, post-depositional alteration and thermal metamorphism were important in determining ??11B values of some of the recrystallized tourmalinites.

Chemical Geology↗

Hawaiian-emperor chain and its relation to cenozoic circumpacific tectonics

The Hawaiian Ridge and Emperor Seamounts appear to form a single chain of tholeiitic shield volcanoes that erupted sequentially on the sea floor of the central Pacific Ocean during Tertiary and Quaternary time. The chain cuts obliquely across the older Cretaceous structural patterns of that sea floor. While the pattern of the chain as a whole is linear, the individual volcanoes lie on short, sigmoidal, en echelon loci that are subparallel with respect to each other and that may represent extensional features in the crust and upper mantle. In general, the order of eurption progressed from northwest to southeaśt along the chain, but the rate of progression of volcanism along individual loci is nonlinear where best studied in the southeastern part of the chain. Furthermore, simultaneous eruptions appear to have occurred within a distance along the chain of about 200 to 400 km. The available data are consistent with a genesis related to the motion of the Pacific crust over a melting spot in the mantle. This melting spot, which may be due to either excess heat or pressure release, appears to have a diameter of about 300 km and is presently centered slightly north of the island of Hawaii. We concur with the idea that the bend in the Hawaiian-Emperor chain probably reflects a significant change in the motion of the Pacific plate. Our best estimate of the age of the Hawaiian-Emperor bend, based on the existing radiometric data, is 24.6 ± 2.5 m.y., which correlates with a time of increased tectonic activity in the western Pacific island arcs and along the northern and eastern boundaries of the Pacific plate. The vector change in the motion of the Pacific plate (with respect to the melting spot) that is required to produce the bend is about 12 cm/yr in a west-southwest-ward direction. © 1972, The Geological Society of America, Inc.

Hawaii↗

A guide to continent-ocean transect E-1: Adirondacks to Georges Bank

The geologic strip-map for Transect E-l cuts a swath from the Thousand Islands region on the New York-Ontario border to the Atlantic Ocean floor off Georges Bank (see Fig. 1). It includes portions of New York, Ontario and of all of the New England states. The western part, mainly in New York, belongs to the North American craton. The remainder of the onland portion, east of Logan's Line, belongs to the Appalachian Orogen. Southeastward from Logan's Line the transect crosses a series of distinctive terranes. Several of these terranes are believed to be exotic, and to have been accreted to the North American craton during the Paleozoic. Superposed on these are several grabens and half-grabens containing early Mesozoic sediments and mafic volcanics. There are also Mesozoic eruptive complexes of an alkalic nature cutting across the Appalachian Orogen from southern Quebec, across New England, and continuing as a chain of seamounts offshore. Cenozoic rocks are limited to a small, but significant occurrence near Brandon, Vermont (BL on Fig. 2) and a few occurrences in the Cape Cod region and on the adjacent islands in southeastern Massachusetts.

GSA's DNAG Continent-Ocean Transect Series↗

Chapter 5. Assessment of undiscovered conventional oil and gas resources-Lower Cretaceous Travis Peak and Hosston formations, Jurassic Smackover interior salt basins total petroleum system, in the East Texas basin and Louisiana-Mississippi salt basins provinces

The Lower Cretaceous Travis Peak Formation of east Texas and southern Arkansas (and the correlative Hosston Formation of Louisiana and Mississippi) is a basinward-thickening wedge of terrigenous clastic sedimentary rocks that underlies the northern Gulf of Mexico Basin from east Texas across northern Louisiana to southern Mississippi. Clastic detritus was derived from two main fluvial-deltaic depocenters, one in northeastern Texas and the other extending from southeastern Mississippi northwestward into northeastern Louisiana. Across the main hydrocarbon-productive trend in east Texas and northern Louisiana, the Travis Peak and Hosston Formations are about 2,000 ft thick. The most likely sources for hydrocarbons in Travis Peak and Hosston reservoirs are two stratigraphically lower units, lime mudstones of the Upper Jurassic Smackover Formation and organic-rich shales of the Upper Jurassic Bossier Shale of the Cotton Valley Group. As a result of the absence of proximal source rocks and a lack of effective migration pathways from stratigraphically or geographically distant source rocks, hydrocarbon charge is sufficient for development of conventional gas accumulations but insufficient for development of basin-centered gas. The petroleum assessment of the Travis Peak and Hosston Formations was conducted by using a total petroleum system model. A total petroleum system includes all of the important elements of a hydrocarbon fluid system needed to develop oil and gas accumulations, including source and reservoir rocks, hydrocarbon generation, migration, traps and seals, and undiscovered accumulations. A total petroleum system is mappable and may include one or more assessment units. For each assessment unit, reservoir rocks contain similar geology, exploration characteristics, and risk. The Jurassic Smackover Interior Salt Basins Total Petroleum System is defined for this assessment to include (1) Upper Jurassic Smackover carbonates and calcareous shales and organic-rich shales of the Upper Jurassic Bossier Shale of the Cotton Valley Group and (2) Lower Cretaceous Travis Peak and Hosston Formations. The Jurassic Smackover Interior Salt Basins Total Petroleum System includes three conventional Travis Peak-Hosston assessment units: Travis Peak-Hosston Gas and Oil (AU 50490205), Travis Peak-Hosston Updip Oil (AU 50490206), and Travis Peak-Hosston Hypothetical Updip Oil (AU 50490207). A fourth assessment unit, the Hosston Hypothetical Slope-Basin Gas Assessment Unit, was named and numbered (AU 50490208) but not geologically defined or quantitatively assessed owing to a lack of data. Together, assessment units 50490205 to 50490207 are estimated to contain a mean undiscovered conventional resource of 29 million barrels of oil, 1,136 billion cubic feet of gas, and 22 million barrels of natural gas liquids.

Alabama, Arkansas. Florida, Georgia, Louisiana, Mi↗

Stratigraphy and vertical hydraulic conductivity of the St. Francois Confining Unit in the Viburnum Trend and evaluation of the Unit in the Viburnum Trend and exploration areas, southeastern Missouri

The confining ability of the St. Francois confining unit (Derby-Doerun Dolomite and Davis Formation) was evaluated in ten townships (T. 31?35 N. and R. 01?02 W.) along the Viburnum Trend of southeastern Missouri. Vertical hydraulic conductivity data were compared to similar data collected during two previous studies 20 miles south of the Viburnum Trend, in two lead-zinc exploration areas that may be a southern extension of the Viburnum Trend. The surficial Ozark aquifer is the primary source of water for domestic and public-water supplies and major springs in southern Missouri. The St. Francois confining unit lies beneath the Ozark aquifer and impedes the movement of water between the Ozark aquifer and the underlying St. Francois aquifer (composed of the Bonneterre Formation and Lamotte Sandstone). The Bonneterre Formation is the primary host formation for lead-zinc ore deposits of the Viburnum Trend and potential host formation in the exploration areas. For most of the more than 40 years the mines have been in operation along the Viburnum Trend, about 27 million gallons per day were being pumped from the St. Francois aquifer for mine dewatering. Previous studies conducted along the Viburnum Trend have concluded that no large cones of depression have developed in the potentiometric surface of the Ozark aquifer as a result of mining activity. Because of similar geology, stratigraphy, and depositional environment between the Viburnum Trend and the exploration areas, the Viburnum Trend may be used as a pertinent, full-scale model to study and assess how mining may affect the exploration areas. Along the Viburnum Trend, the St. Francois confining unit is a complex series of dolostones, limestones, and shales that generally is 230 to 280 feet thick with a net shale thickness ranging from less than 25 to greater than 100 feet with the thickness increasing toward the west. Vertical hydraulic conductivity values determined from laboratory permeability tests were used to represent the St. Francois confining unit along the Viburnum Trend. The Derby-Doerun Dolomite and Davis Formation are statistically similar, but the Davis Formation would be the more hydraulically restrictive medium. The shale and carbonate values were statistically different. The median vertical hydraulic conductivity value for the shale samples was 62 times less than the carbonate samples. Consequently, the net shale thickness of the confining unit along the Viburnum Trend significantly affects the effective vertical hydraulic conductivity. As the percent of shale increases in a given horizon, the vertical hydraulic conductivity decreases. The range of effective vertical hydraulic conductivity for the confining unit in the Viburnum Trend was estimated to be a minimum of 2 x 10-13 ft/s (foot per second) and a maximum of 3 x 10-12 ft/s. These vertical hydraulic conductivity values are considered small and verify conclusions of previous studies that the confining unit effectively impedes the flow of ground water between the Ozark aquifer and the St. Francois aquifer along the Viburnum Trend. Previously-collected vertical hydraulic conductivity data for the two exploration areas from two earlier studies were combined with the data collected along the Viburnum Trend. The nonparametric Kruskal-Wallis statistical test shows the vertical hydraulic conductivity of the St. Francois confining unit along the Viburnum Trend, and west and east exploration areas are statistically different. The vertical hydraulic conductivity values generally are the largest in the Viburnum Trend and are smallest in the west exploration area. The statistical differences in these values do not appear to be attributed strictly to either the Derby-Doerun Dolomite or Davis Formation, but instead they are caused by the differences in the carbonate vertical hydraulic conductivity values at the three locations. The calculated effective vertical hydraulic conductivity range for the St. Franc

Water-Resources Investigations Report↗

Hydrogeologic framework and ground-water Flow in quaternary deposits at the U.S. Army Atterbury Joint Maneuver Training Center near Edinburgh, Indiana, 2002-2003

A hydrogeologic framework was developed for unconsolidated Quaternary deposits at the U.S. Army Atterbury Joint Maneuver Training Center. The framework describes the potential for the occurrence of ground water on the basis of physiography and the distribution of geologic materials within the study area. Four geologic units-the Jessup, Trafalgar, Atherton, and Martinsville Formations-were identified, and their distribution was mapped as four hydrogeologic regions. The Jessup and Trafalgar Formations are fine-grained, poorly sorted tills. At least two facies of the Atherton Formation, the lacustrine and outwash facies, are in the study area. The Martinsville Formation includes materials deposited or reworked since the glacial period. With the exception of the Atherton Formation outwash facies, the Quaternary deposits are primarily fine-grained, silt- and clay-rich sediments that function as confining layers or aquitards. The Atherton Formation out-wash facies includes sand and gravel deposits that constitute the primary aquifers in the study area. The four hydrogeologic regions mapped in this investigation are designated as the Bedrock, Jessup Till, Trafalgar Till, and Atherton Outwash Regions. Each region represents an area with a distinctive physiographic expression and vertical sequence of Quaternary deposits. The Bedrock Region in the western and southwestern part of the study area commonly is underlain by 0 to 15 feet of Martinsville Formation resting directly on bedrock. Potential ground-water yields are limited. The Jessup Till Region in the southeastern part of the study area includes the uplands on either side of the stream valleys. Sediments commonly range from 30 to 90 feet in thickness. This region includes clay-rich till of the Jessup Formation and sand and gravel deposits of the Atherton Formation outwash facies; the Atherton Formation outwash facies tends to be thin, and ground-water yields will be moderate. The Trafalgar Till Region in the north and northwest-central part of the study area commonly is underlain by 10 to 30 feet of Trafalgar till or Trafalgar till over 25 to 50 feet of Jessup till. Within, separating, and beneath these tills are deposits of the Atherton Formation outwash facies-the sand and gravel deposits with the best potential to support a water-supply well. Generally, the outwash facies in this region are thin sand and gravel lenses, except in a few locations that are in excess of 30 feet thick. The Atherton Outwash Region is the lowland area associated with the major valleys in all but the far southwestern part of the study area. This region has the greatest thickness of outwash facies sands and gravels (often in excess of 20 feet), which are the primary aquifers. In the Atterbury Joint Maneuver Training Center, the combined Atherton Outwash Region and the Trafalgar Till Region have the greatest potential as infiltration areas because of low topographic relief and(or) sandy soils. From water-level data collected in July and August 2003, horizontal ground-water flow was determined generally to be toward the Atherton Outwash Region and the valley of the Drift-wood River to the east. Vertical hydraulic gradients were documented at nested well pairs. At two sites, upwardly directed gradients are reflected by flowing wells. Ground-water discharge to surface water is likely in some eastern reaches of the valleys of Nineveh and Lick Creeks. In the valley of Nineveh Creek, potential for ground-water discharge is indicated by the presence of a flowing well, upwardly directed vertical hydraulic gradients, and ground-water heads that were higher than surface-water elevations. In the valley of Lick Creek, ground-water discharge also is indicated by the presence of flowing wells and ground-water heads that were higher than surface-water elevations.

Indiana↗

Assessment of the hydrogeology and water quality in a near-shore well field, Sarasota, Florida

The city of Sarasota, Florida, operates a downtown well field that pumps mineralized water from ground water sources to supply a reverse osmosis plant. Because of the close proximity of the well field to Sarasota Bay and the high sulfate and chloride concentrations of ground-water supplies, a growing concern exists about the possibility of lateral movement of saltwater in a landward direction (intrusion) and vertical movement of relict sea water (upconing). In 1992, the U.S. Geological Survey began a 3-year study to evaluate the hydraulic characteristics and water quality of ground-water resources within the downtown well field and the surrounding 235-square-mile study area. Delineation of the hydrogeology of the study area was based on water- quality data, aquifer test data, and extensive borehole geophysical surveys (including gamma, caliper, temperature, electrical resistivity, and flow meter logs) from the six existing production wells and from a corehole drilled as part of the study, as well as from published and unpublished reports on file at the U.S. Geological Survey, the Southwest Florida Water Management District, and consultant's reports. Water-quality data were examined for spatial and temporal trends that might relate to the mechanism for observed water-quality changes. Water quality in the study area appears to be dependent upon several mechanisms, including upconing of higher salinity water from deeper zones within the aquifer system, interbore-hole flow between zones of varying water quality through improperly cased and corroded wells, migration of highly mineralized waters through structural deformities, and the presence of unflushed relict seawater. A numerical ground-water flow model was developed as an interpretative tool where field-derived hydrologic characteristics could be tested. The conceptual model consisted of seven layers to represent the multilayered aquifer systems underlying the study area. Particle tracking was utilized to delineate the travel path of water as it enters the model area under a set of given conditions. Within the model area, simulated flow in the intermediate aquifer system originates primarily from the northwestern boundary. Simulated flow in the Upper Floridan aquifer originates in lower model layers (deeper flow zones) and ultimately can be traced to the southeastern and northwestern boundaries. Volumetric budgets calculated from numerical simulation of a hypothetical well field indicate that the area of contribution to the well field changes seasonally. Although ground-water flow patterns change with wet and dry seasons, most water enters the well-field flow system through lower parts of the Upper Floridan aquifer from a southeastern direction. Moreover, particle tracking indicated that ground-water flow paths with strictly lateral pathlines in model layers correspond to the intermediate aquifer system, whereas particles traced through model layers corresponding to the Upper Floridan aquifer had components of vertical and lateral flow.

Water-Resources Investigations Report↗

Geology and paleontology of the Santa Maria district, California

Stratigraphy, paleontology, and geologic history.-A basement' consisting of igneous rocks of the Jurassic(?) Franciscan formation and sediments of the Upper Jurassic Knoxville formation, and formations of Tertiary and Quaternary age are exposed in the Santa Maria district. The outcrop section, exclusive of the Franciscan, has a maximum thickness of about 10,000 feet, the subsurface section about 27,000 feet. At no locality, however, is either outcrop or subsurface section as thick as the total maxima for the formations. The outcrop Franciscan is made up of altered basalt, gabbro (generally- greatly altered), and minor areas of peridotite and serpentine. The marine Knoxville formation, consisting of shale, thin-bedded calcareous sandstone, and conglomerate, was deposited on the igneous rocks of the Franciscan. It has an outcrop thickness of about 500 feet and a known subsurface thickness of at least 1,250 feet. Aucella cf. A. piochii, which occurs in both outcrop and subsurface sections, suggests late Jurassic age. The Franciscan and Knoxville were probably uplifted during Taliaferro's Diablan orogeny at the close of the Jurassic and formed a land area that presumably endured during early Cretaceous and perhaps during much of late Cretaceous time. If sediments were laid down while 10,000 feet of Upper Cretaceous were deposited in the adjoining San Rafael Mountains, they were eroded following uplift at the close of the Cretaceous, when Reed and Hollister's San Rafael uplift was formed. The district is inferred to have been part of a Franciscan and Knoxville land area at the south border of the San Rafael uplift during all of early Tertiary time. The known history of the district as part of a Tertiary basin began in the early Miocene(?), possibly a little earlier or possibly 3: little later, when the nonmarine sediments of the early Miocene(?) Lospe formation were deposited. The Lospe formation has a maximum thickness of 2, 700 feet, and is made up of coarse-grained reddish sandstone and conglomerate, and greenish sandstone, gypsiferous siltstone, and mudstone. White tuff is a minor but conspicuous constituent. The Lospe formation overlies the Knoxville, or· overlaps it and rests on the Franciscan. The first known Tertiary invasion of the sea took place immediately thereafter in early middle Miocene time, and from then on until approximately the end of the Pliocene the sea occupied continuously at least most of the region. The extent of the Miocene basin is not certainly known, but it was part of an extensive· basin that has been designated the Santa Barbara embayment. The early middle Miocene Point Sal formation is the earliest marine Tertiary formation. It has an outcrop thickness of as much as 1,500 feet and a maximum subsurface thickness of 3,600 feet, and consists of siltstone, mudstone, and thin beds of sandstone. The Point Sal formation overlies the Lospe formation without marked discontinuity, or overlaps it and rests on Knoxville or Franciscan. It contains a large foraminiferal fauna representing the Siphogenerina hughesi zone, or the lower part of Kleinpell's Relizian stage. The Monterey shale overlies the Point Sal formation without noticeable discontinuity, or overlaps all the older sedimentary formations and rests on the Franciscan. It has a maximum outcrop thickness of 2,100 feet, but is as much as 5,000 feet thick in some subsurface sections. The Monterey is divided into three mapped members. The lower member is characterized by phosphatic shale and somewhat porcelaneous shale; the middle member by chert and cherty shale; and the upper member by porcelaneous shale, or by both porcelaneous shale and diatomaceous strata. The lower member contains Foraminifera representing the upper part of Kleinpell's Relizian stage and all of his Luisian stage, the middle member a few species indicating the lower part of his Mohnian stage, and the upper member a fauna representing the upper part of the Bolivina hughesi zone, at the top of the Mohnian, and in part a younger unnamed faunal division; that is, the Monterey is of late middle and late Miocene age. The diverse stratigraphic relations of the Lospe and Point Sal formations and Monterey shale along the borders of the Franciscan rocks forming Point Sal Ridge are inferred to be the result of repeated movements during Miocene time in the area of basement rocks west of the district, presumably extending westward beyond the present coast. Toward the close of the Miocene, low ridges appeared on the floor of the sea, ridges that grew during Pliocene time and were destined to become anticlines. At the same time deformation took place in the northeastern part of the district, and elsewhere on some anticlines, or on other structural highs bounded by faults. In those areas the Sisquoc formation overlies the Monterey shale with marked discordance; elsewhere there is no discordance. Two facies of the Sisquoc formation are mapped: a marginal sandstone facies, designated the Tinaquaic sandstone member, and a basin facies. The Tinaquaic sandstone member is 1,400 feet thick and contains megafossils of middle Pliocene age (also early Pliocene just east of the mapped area). It is unconformable on the Monterey. The basin facies, at least 3,000 feet thick in outcrop sections and 5,000 in some subsurface sections, consists of diatomaceous mudstone, other types of diatomaceous ·strata, somewhat porcelaneous mudstone, and porcelaneous shale-deposits that are ordinarily characteristic of the Monterey shale. Even in areas where the two formations are lithologically indistinguishable and conformable, a field basis for differentiating them has been established. The basin facies of the Sisquoc conformably overlies the Monter.ey in outcrop sections, but in some subsurface sections the formations are unconformable, and on the north limb of the Santa Maria Valley syncline the basin facies of the Sisquoc overlaps the Monterey onto the basement, thus forming the overlap trap for the oil in the Monterey in the Santa Maria Valley field. The lower and middle parts of the basin facies contain Foraminifera of the Bolivina obliqua zone. Kleinpell assigned that zone to the lower part of his late upper Miocene Delmontian stage. Assignment to the upper Delmontian, however, appears to be preferable. The upper few hundred feet of the basin facies contain Foraminifera similar to those in the overlying Foxen mudstone and megafossils of middle Pliocene affinities. The basin facies is therefore considered late upper Miocene to middle Pliocene. The submarine ridges were growing during Pilocene time. The Foxen mudstone is missing on them and in the northeastern part of the district. On the north limb of the Santa Maria Valley syncline, the Foxen overlaps the Sisquoc formation and rests on the basement. In the basins between the submarine ridges, the mudstone, siltstone, and fine-grained sandstone of the Foxen (800 feet thick in outcrop sections and as much as 2, 750 in subsurface sections) overlie conformably the Sisquoc formation. In some of the areas where the Foxen is missing as a lithologic unit, it appears to be represented by condensed deposits of phosphatic pellets, mapped with the underlying or overlying Formation, depending on the matrix, or by a condensed section of fine-grained sand, mapped with lithologically indistinguishable sand in the basal part of the overlying formation. Though foraminifera are abundant in the Foxen mudstone, relatively few species are represented. Those from the lower part of the formation may be of middle Pliocene age. Megafossils from the upper part of the Foxen are considered late Pliocene. The formation is therefore assigned to the middle(?) and upper Pliocene. Movements during Pliocene time in the basement area west of Point Sal Ridge are indicated by the occurrence in the western Casmalia Hills of coarse detritus from the Monterey in the upper part of the Sisquoc formation and in the Foxen mudstone. During late Pliocene time, when the Careaga sandstone was deposited, the Pliocene sea had its greatest extent. The region then flooded may be referred to as the Santa Maria basin. Throughout most of the district two mapped members of the Careaga sandstone are differentiated: the Cebada fine-grained member, which has a maximum outcrop thickness of 1,000 feet, and the Graciosa coarse-grained member, 50 to 425 feet thick. Mild deformation continued during the late Pliocene. The Cebada fine-grained member is missing on the embryonic anticlines, where it is overlapped by the Graciosa coarse-grained member. Both members of the Careaga sandstone contain a large megafauna. The nonmarine Paso Robles formation conformably overlies the Careaga sandstone. The Paso Robles consists chiefly of sand and gravel, but clay, marl, and limestone are the most characteristic constituents. The maximum outcrop thickness is 2,000 feet, the estimated maximum subsurface thickness 4,500 feet. The Paso Robles fresh-water fauna is meager, consisting of a few species similar to living forms. The formation is currently assigned to the interval including late Pliocene and early Pleistocene(?). The age assignment late Pliocene(?) and early Pleistocene, however, may be preferable for the Santa Maria district. Then followed the only period of strong general deformation in the known Tertiary and Pleistocene history of the district. The present structural features of the district were formed at that time, and the submarine ridges appeared as fully formed anticlines. Dating of the deformation is uncertain, because of uncertainty concerning the age of the Paso Robles formation. It is, however, without much doubt of the same age as the welldated strong middle Pleistocene deformation in the Ventura basin. Terrace deposits, laid down on both wave-cut and stream-cut platforms, are rather arbitrarily assigned to the late Pleistocene. The oldest and most extensive terrace deposits, not more than 100 feet thick, are designated the Orcutt sand. The Orcutt sand itself is tilted as much as 12° on the limbs of anticlines and is faulted on the north limb of the Graciosa anticline, indicating renewed growth of the anticlines, presumably in late Pleistocene time. Terrace deposits apparently younger than the Orcutt sand are arched in a low anticline west of lower Foxen Canyon. Structure.-Santa Maria Valley is the boundary between two structural provinces. To the north, valleys and hills are either synclines or anticlines. To the south, on the contrary, major valleys coincide generally with major synclines, and the hills are anticlinal. Santa Maria Valley itself is a syncline. Unlike valleys farther south in the district, however, it lies athwart an older uplift. Also unlike most of the valleys farther south, the axis of the syncline is not in the middle of the valley, but is far to the south near the bordering hills. Indeed, in the western Casmalia Hills, the anticline in the bordering hills is overturned and overrides the axis of the syncline. The major structural features of the district have a general west-northwestward trend parallel to the trend of the basin. Minor westward-trending and northward-trending folds and faults, however, extend across the trend of the major features. The district includes areas of wide, open folds and also areas of narrow, closely spaced, and steeply tilted folds, as well as some major overturned anticlines, most of the latter overturned northward. The closely spaced folds coincide almost invariably with outcrops of the Monterey shale and Point Sal formation. Physiography.-The surface on which the terrace deposits, designated the Orcutt sand, were deposited is extensive but is locally deformed, and only remnants are preserved. Toward the coast it changes from a stream-cut surface to a wave-cut surface. In the coastal area three main marine terraces are recognized: the high terrace (altitude about 800 feet), the intermediate terrace (altitude about 600 feet), and the low terrace (altitude 50 to 125 feet). An indurated layer is present at or near the surface at many localities scattered throughout the district. It is suggested that the indurated layer is an ancient hardpan, the incomplete skeleton of a former soil profile developed on a former surface of less relief than the present surface. Sand dunes extend inland from the coast at the north and south borders of the mapped area. They are classified under three age groups: old, intermediate, and modern. The old dunes, which have a protective cover of natural vegetation and are now inactive, are far more extensive than those of the other two groups. They cover many square miles on a terrace bordering Santa Maria Valley, and extend 20 miles inland. It has not been determined whether their inactivity is due to a cutting off of the supply of sand, or to a climatic change. Occurrence of oil.--Oil has been produced in the Santa Maria district since 1901, the total production to the end of 1947 being 269,657,000 barrels. Throughout the district most of the oil is heavy. Seven producing fields are located in the mapped area. In order of discovery from oldest to youngest the fields are as follows: Orcutt, Lompoc, West Cat Canyon, East Cat Canyon, Casmalia, Gato Ridge, and Santa Maria Valley. The Santa Maria Valley field is the largest in both area and productive capacity. It is the largest overlap field in coastal California, and one of the last major fields found in the State up to 1947. The Las Flores (Monterey) pool is transforming the West Cat Canyon field into one of the major fields of the district. The Monterey shale is the chief oil-bearing formation, and the principal reservoir in the Monterey consists of fractured chert and cherty shale. Sand in the Sisquoc formation is the sole reservoir in the minor East Cat Canyon field and in the Pliocene pool of the West Cat Canyon field. The Point Sal formation yields some oil in the southeastern part of the Santa Maria Valley field (the only part of that field where the formation is present) and a recent well in the Casmalia field is producing a small amount of relatively light oil from the Point Sal. The Lospe formation is also productive in a recent well in the Casmalia field. The Knoxville formation is productive in three areas in the northern part of the Santa Maria Valley field. The Point Sal formation offers the greatest promise for deeper-zone production. The Lospe and Knoxville formations can no longer be ignored in areas where younger marine formations overlap against them. Oil possibilities in undeveloped areas.--Two matters weigh heavily in prospecting in the Santa Maria district: the degree of fracturing of chert and cherty shale in the Monterey shale, and the gravity of the oil. Other things being equal, the productivity of the Monterey varies directly with the amount of fracturing. Very heavy oil, too heavy to produce commercially under present conditions, has befln found ii the Monterey in the northeastern part of the district, where five discoveries (one east of the mapped area) have been made in recent years. Among areas of possible interest, three appear to be favorable for prospecting on the basis of surface geology: an area east of Foxen Canyon, where oil may be trapped in the basal part of the Tinaquaic sandstone member of the Sisquoc formation by westward overlap of successively higher Tinaquaic strata onto the Monterey shale; an area so1tth of the I ... ions Head fault, where oil may be trapped by the fault; and the offshore extension of the north border of Point Sal Ridge, where oil may possibly be trapped in the Monterey by overlap of the Sisquoc formation.

California↗

Hurricane Rita surge data, southwestern Louisiana and southeastern Texas, September to November 2005

Pressure transducers and high-water marks were used to document the inland water levels related to storm surge generated by Hurricane Rita in southwestern Louisiana and southeastern Texas. On September 22-23, 2005, an experimental monitoring network consisting of 47 pressure transducers (sensors) was deployed at 33 sites over an area of about 4,000 square miles to record the timing, extent, and magnitude of inland hurricane storm surge and coastal flooding. Sensors were programmed to record date and time, temperature, and barometric or water pressure. Water pressure was corrected for changes in barometric pressure and salinity. Elevation surveys using global-positioning systems and differential levels were used to relate all storm-surge water-level data, reference marks, benchmarks, sensor measuring points, and high-water marks to the North American Vertical Datum of 1988 (NAVD 88). The resulting data indicated that storm-surge water levels over 14 feet above NAVD 88 occurred at three locations and rates of water-level rise greater than 5 feet per hour occurred at three locations near the Louisiana coast. Quality-assurance measures were used to assess the variability and accuracy of the water-level data recorded by the sensors. Water-level data from sensors were similar to data from co-located sensors, permanent U.S. Geological Survey streamgages, and water-surface elevations performed by field staff. Water-level data from sensors at selected locations were compared to corresponding high-water mark elevations. In general, the water-level data from sensors were similar to elevations of high quality high-water marks, while reporting consistently higher than elevations of lesser quality high-water marks.

Data Series↗

Utility of high-altitude infrared spectral data in mineral exploration: Application to Northern Patagonia Mountains, Arizona

Synoptic views of hydrothermal alteration assemblages are of considerable utility in regional-scale minerals exploration . Recent advances in data acquisition and analysis technologies have greatly enhanced the usefulness of remotely sensed imaging spectroscopy for reliable alteration mineral assemblages mapping. Using NASA's Airborne Visible Infrared Imaging Spectrometer (AVIRIS) sensor, this study mapped large areas of advanced argillic and phyllic-argillic alteration assemblages in the southeastern Santa Rita and northern Patagonia mountains , Arizona . Two concealed porphyry copper deposits have been identified during past exploration , the Red Mountain and Sunnyside deposits, and related published hydrothermal alteration zoning studies allow the comparison of the results obtained from AVIRIS data to the more traditional field mapping approaches. The AVIRIS mapping compares favorably with field-based studies. An analysis of iron-bearing oxide minerals above a concealed supergene chalcocite deposit at Red Mountain also indicates that remotely sensed data can be of value in the interpretation of leached caps above porphyry copper deposits. In conjunction with other types of geophysical data , AVIRIS mineral maps can be used to discriminate different exploration targets within a region.

Economic Geology↗

Hydrogeology and simulated effects of ground-water withdrawals from the Floridan aquifer system in Lake County and in the Ocala National Forest and vicinity, north-central Florida

The hydrogeology of Lake County and the Ocala National Forest in north-central Florida was evaluated (1995-2000), and a ground-water flow model was developed and calibrated to simulate the effects of both present day and future ground-water withdrawals in these areas and the surrounding vicinity. A predictive model simulation was performed to determine the effects of projected 2020 ground-water withdrawals on the water levels and flows in the surficial and Floridan aquifer systems. The principal water-bearing units in Lake County and the Ocala National Forest are the surficial and Floridan aquifer systems. The two aquifer systems generally are separated by the intermediate confining unit, which contains beds of lower permeability sediments that confine the water in the Florida aquifer system. The Floridan aquifer system has two major water-bearing zones (the Upper Floridan aquifer and the Lower Floridan aquifer), which generally are separated by one or two less-permeable confining units. The Floridan aquifer system is the major source of ground water in the study area. In 1998, ground-water withdrawals totaled about 115 million gallons per day in Lake County and 5.7 million gallons per day in the Ocala National Forest. Of the total ground water pumped in Lake County in 1998, nearly 50 percent was used for agricultural purposes, more than 40 percent for municipal, domestic, and recreation supplies, and less than 10 percent for commercial and industrial purposes. Fluctuations of lake stages, surficial and Floridan aquifer system water levels, and Upper Floridan aquifer springflows in the study area are highly related to cycles and distribution of rainfall. Long-term hydrographs for 9 lakes, 8 surficial aquifer system and Upper Floridan aquifer wells, and 23 Upper Floridan aquifer springs show the most significant increases in water levels and springflows following consecutive years with above-average rainfall, and significant decreases following consecutive years with below-average rainfall. Long-term (1940-2000) hydrographs of lake and ground-water levels and springflow show a slight downward trend; however, after the early 1960's, this downward trend generally is more pronounced, which corresponds with accumulating rainfall deficits and increased development. The U.S. Geological Survey three-dimensional ground-water flow model MODFLOW-2000 was used to simulate ground-water flow in the surficial and Floridan aquifer systems in Lake County, the Ocala National Forest, and adjacent areas. A steady-state calibration to average 1998 conditions was facilitated by using the inverse modeling capabilities of MODFLOW-2000. Values of hydrologic properties from the calibrated model were in reasonably close agreement with independently estimated values and results from previous modeling studies. The calibrated model generally produced simulated water levels and flows in reasonably close agreement with measured values and was used to simulate the hydrologic effects of projected 2020 conditions. Ground-water withdrawals in the model area have been projected to increase from 470 million gallons per day in 1998 to 704 million gallons per day in 2020. Significant drawdowns were simulated in Lake County from average 1998 to projected 2020 conditions: the average and maximum drawdowns, respectively, were 0.5 and 5.7 feet in the surficial aquifer system, 1.1 and 7.6 feet in the Upper Floridan aquifer, and 1.4 and 4.3 feet in the Lower Floridan aquifer. The largest drawdowns in Lake County were simulated in the southeastern corner of the County and in the vicinities of Clermont and Mount Dora. Closed-basin lakes and wetlands are more likely to be affected by future pumping in these large drawdown areas, as opposed to other areas of Lake County. However, within the Ocala National Forest, drawdowns were relatively small: the average and maximum drawdowns, respectively, were 0.1 and 1.0 feet in the surficial aquifer system, 0.2 and

Water-Resources Investigations Report↗

Geologic framework and hydrogeologic characteristics of the Edwards aquifer, Uvalde County, Texas

The Edwards aquifer in Uvalde County is composed of Lower Cretaceous carbonate (mostly dolomitic limestone) strata of the Devils River Formation in the Devils River trend and of the West Nueces, McKnight, and Salmon Peak Formations in the Maverick basin. Rocks in the Devils River trend are divided at the bottom of the Devils River Formation into the (informal) basal nodular unit. Maverick basin rocks are divided (informally) into the basal nodular unit of the West Nueces Formation; into lower, middle, and upper units of the McKnight Formation; and into lower and upper units of the Salmon Peak Formation. The Edwards aquifer overlies the (Lower Cretaceous) Glen Rose Limestone, which composes the lower confining unit of the Edwards aquifer. The Edwards aquifer is overlain by the (Upper Cretaceous) Del Rio Clay, the basal formation of the upper confining unit. Upper Cretaceous and (or) Lower Tertiary igneous rocks intrude all stratigraphic units that compose the Edwards aquifer, particularly in the southern part of the study area. The Balcones fault zone and the Uvalde salient are the principal structural features in the study area. The fault zone comprises mostly en echelon, high-angle, and down-to-the-southeast normal faults that trend mostly from southwest to northeast. The Uvalde salient—resulting apparently from a combination of crustal uplift, diverse faulting, and igneous activity—elevates the Edwards aquifer to the surface across the central part of Uvalde County. Downfaulted blocks associated with six primary faults—Cooks, Black Mountain, Blue Mountain, Uvalde, Agape, and Connor—juxtapose the Salmon Peak Formation (Lower Cretaceous) in central parts of the study area against Upper Cretaceous strata in the southeastern part. The carbonate rocks of the Devils River trend and the Maverick basin are products of assorted tectonic and depositional conditions that affected the depth and circulation of the Cretaceous seas. The Devils River Formation formed in a fringing carbonate bank—the Devils River trend— in mostly open shallow marine environments of relatively high wave and current energy. The West Nueces, McKnight, and Salmon Peak Formations resulted mostly from partly restricted to open marine, tidal-flat, and restricted deep-basinal environments in the Maverick basin. The porosity of the Edwards aquifer results from depositional and diagenetic effects along specific lithostratigraphic horizons (fabric selective) and from structural and solutional features that can occur in any lithostratigraphic horizon (non-fabric selective). In addition to porosity depending upon the effects of fracturing and the dissolution of chemically unstable (soluble) minerals and fossils, the resultant permeability depends on the size, shape, and distribution of the porosity as well as the interconnection among the pores. Upper parts of the Devils River Formation and the upper unit of the Salmon Peak Formation compose some of the most porous and permeable rocks in Uvalde County.

Texas↗

Methods for Monitoring Fish Communities of Buffalo National River and Ozark National Scenic Riverways in the Ozark Plateaus of Arkansas and Missouri: Version 1.0

Buffalo National River located in north-central Arkansas, and Ozark National Scenic Riverways, located in southeastern Missouri, are the two largest units of the National Park Service in the Ozark Plateaus physiographic province. The purpose of this report is to provide a protocol that will be used by the National Park Service to sample fish communities and collect related water-quality, habitat, and stream discharge data of Buffalo National River and Ozark National Scenic Riverways to meet inventory and long-term monitoring objectives. The protocol includes (1) a protocol narrative, (2) several standard operating procedures, and (3) supplemental information helpful for implementation of the protocol. The protocol narrative provides background information about the protocol such as the rationale of why a particular resource or resource issue was selected for monitoring, information concerning the resource or resource issue of interest, a description of how monitoring results will inform management decisions, and a discussion of the linkages between this and other monitoring projects. The standard operating procedures cover preparation, training, reach selection, water-quality sampling, fish community sampling, physical habitat collection, measuring stream discharge, equipment maintenance and storage, data management and analysis, reporting, and protocol revision procedures. Much of the information in the standard operating procedures was gathered from existing protocols of the U.S. Geological Survey National Water Quality Assessment program or other sources. Supplemental information that would be helpful for implementing the protocol is included. This information includes information on fish species known or suspected to occur in the parks, sample sites, sample design, fish species traits, index of biotic integrity metrics, sampling equipment, and field forms.

Open-File Report↗

Precipitation runoff modeling system (PRMS) as part of an integrated hydrologic model for the Osage Nation, northeastern Oklahoma, 1915–2014

Executive Summary The Osage Nation lacks a comprehensive tribal water plan to describe the quality and quantity of water resources in the Osage Nation, a 2,304-square-mile (mi 2 ) area of rolling pastures, tallgrass prairie, and mixed woodlands in northeastern Oklahoma. A tribal water plan can be used to help manage the sustainable development of surface and groundwater resources, thereby helping to provide a better future for the Osage Nation and their neighbors, while preserving water resources for the benefit of the surrounding environment and future generations. To help meet these goals and contribute to increased knowledge of the quantity and quality of water resources and the hydrologic processes and factors affecting those resources, the U.S. Geological Survey (USGS) in cooperation with the Osage Nation began studies to evaluate the surface-water and groundwater resources of the Osage Nation. An important component of these studies is the development and application of numerical models to improve quantification and understanding of the hydrologic system. These models are needed to estimate and quantify the effects of historical and potential future water resource development for the Osage Nation. This report describes the development and application of a precipitation-runoff model, the Osage Nation watershed model (ONWM). The ONWM is needed as a component of the Osage Nation integrated hydrologic model (ONIHM). At the time of this study, the ONIHM was being developed using the USGS computer software MODFLOW-One Water Hydrologic Flow Model (MODFLOW-OWHM). The intended use of the ONIHM is to simulate all surface-water and groundwater components of the hydrologic system for a 2,905-mi 2 study area centered on the Osage Nation. The ONWM was developed using the USGS Precipitation Runoff Modeling System, version 4 (PRMS-IV) computer software, also referred to as PRMS in this report, for an 8,343-mi 2 study area in northeastern Oklahoma and southeastern Kansas, centered on and including the areas of the Osage Nation and the ONIHM. The ONWM is to be used as part of the ONIHM to provide a direct coupling with spatially and temporally varying daily climate conditions affecting the ONIHM study area. As an integral part of the ONIHM, the ONWM (1) simulates the inflow boundary conditions from tributary basins in the region outside and surrounding the ONIHM area; (2) provides estimates of spatially and temporally distributed precipitation, air temperature, potential evapotranspiration (PET), actual evapotranspiration (ET), soil moisture, recharge, and streamflow in the ONIHM area; and (3) provides a preliminary water budget for the ONIHM area and the surrounding region, including tributary drainage basins outside of and next to the ONIHM. The specific objectives of this study were to use the ONWM to (1) provide a systematic inventory of the historical distribution of water inflows from precipitation (rain or snow) falling on the land surface and flowing through the surface-water network, (2) provide a historical context of the variability and spatial and temporal distribution of these waters, and (3) provide estimates of water inflows and potential observations to the ONIHM. The application of the ONWM as a component of the ONIHM is needed for planned simulations using the ONIHM to improve the understanding of the hydrologic system and to develop a fully comprehensive water budget, including the use and movement of water across the landscape, in the surface-water network, and in groundwater aquifers under historical and potential future conditions.

Oklahoma↗

Summary geochemical maps for samples of rock, stream sediment, and nonmagnetic heavy-mineral concentrate, Pyramid Roadless Area, El Dorado County, California

The Wilderness Act (Public Law 88-577, September 3, 1964) and related acts require the U.S. Geological Survey and the U.S. Bureau of Mines to survey certain areas on Federal lands to determine their mineral resource potential. Results must be made available to the public and be submitted to the President and the Congress. This report presents the results of a geochemical survey of the Pyramid Roadless Area (5203) in the Eldorado National Forest and Lake Tahoe Basin Management Unit, El Dorado County, California. This roadless area was classified as a further planning area during the Second Roadless Area Review and Evaluation (RARE II) by the U.S. Forest Service, January 1979. The Pyramid Roadless Area lies near the crest of the Sierra Nevada about 75 miles east of Sacramento, California. the area, which is adjacent to and almost encircles the Desolation Wilderness, encompasses approximately 31,400 acres in Eldorado National Forest and the Lake Tahoe Basin Management Unit in El Dorado County, California. The area is dominated by deep rugged canyons that run eastward from the Sierra Nevada crest to Lake Tahoe basin and westward toward the Sacramento Valley. Elevations range from about 5,500 feet along Big Silver Creek on the west side of the study area to 8,895 feet at Echo Peak along the southeastern side of the roadless area. Geochemical sampling was conducted during 1982. This report summarizes the results of that investigation and provides details of the geochemical evaluation used in producing the final mineral resource assessment of the study area (Armstrong and others, 1983).

California↗

Integrated geophysical characterization of the Winthrop Landfill Southern Flow Path, Winthrop, Maine

The U.S. Geological Survey (USGS), in cooperation with United Technologies Corporation, used an integrated suite of borehole, surface, and water-borne geophysical methods near the site of the former Winthrop Landfill, Winthrop, Maine, to investigate the hydrogeology controlling the transport of leachate from the landfill to nearby Annabessacook Lake. During the fall of 2000 and summer of 2001, the USGS conducted borehole electromagnetic (EM) induction and gamma logging, and inductive terrain-conductivity, two-dimensional (2D) resistivity, continuous seismic reflection, and magnetic surveys. The objectives of this integrated geophysical study were to provide constraints on the location and extent of the southern flow path(s) of contamination from the landfill to the lake; identify shoreline seep geophysical signatures; identify potentially hidden seeps in the lake; and determine depth to bedrock below Annabessacook Lake in the study area. Interpretation of surface 2D resistivity, magnetic, and inductive terrain-conductivity data and borehole EM logs delineates an electrically conductive anomaly consistent with a leachate plume moving from the current landfill boundary southward through the overburden to the shores of Annabessacook Lake. Surface and borehole geophysical data collected south and southeast of the landfill indicate the presence of discrete, shallow conductive anomalies at the southeastern edge of the landfill and near the lakeshore. The conductive anomalies appear at increasing depths closer to the lake. Magnetic anomalies offshore confirm the presence of iron-rich landfill leachate discharging into the lake south of the landfill. High-resolution swept-frequency seismic data used to map sediment and grain size distribution in the lake sub-bottom along the shoreline identified sediment-infilled bedrock lows that may act as conduits for contaminant migration.

Maine↗

Surficial geology and geomorphology of Potter County, Pennsylvania

Potter County is located in the Appalachian Plateaus of north-central Pennsylvania and contains the headwaters of the Genesee River, the Allegheny River, and the Susquehanna River. Drift of Wisconsin age covers the northeastern part of the county. This study includes a detailed survev of the surficial deposits of the Genesee quadrangle in north-central Potter County and a reconnaissance of the remainder of the county; a soil survey and a botanical survey were carried on concurrently. The region is a deeply dissected plateau having extensive areas of steeply sloping land separated by narrow ridges and valleys; there is very little level land. Near the junction of the three watersheds the uplands rise to altitudes of more than 2,500 feet. The maximum relief in the Susquehanna drainage is more than 1,500 feet; in the Genesee and Allegheny drainage it. is about 800 feet. Valley walls are steep (15° to 30°), and the uplands have gentle slopes (0.5° to 10°). The drainage pattern is trellised. The climate is continental. Temperatures range from about -30° F. to more than 100° F. The average annual precipitation ranges approximately from 34 to 42 inches. Floods may occur at any season of the year. The large volumes of water from rain or melting snow carried by small streams come from springs. There is little precise data on frost in the ground, but it is probable that the ground seldom freezes in forested areas. The soils of Potter County have relatively immature profiles with poorly developed horizons that commonly have many characteristics inherited from their parent materials. At the great soil group level, the zonal soils are divided into Podzol soils and Brown Podzolic soils. Many soils have a high silt content in the upper part of the profile, apparently derived (at least partly) from a mantle of eolian silt. Mos~ of Potter County is covered by second-growth forests consisting of 40- to 60-year-old hardwood stands. The present forests growing on slopes and summits are composed approximately of 25 species of trees. The northern hardwood region includes most of the county, with an oak-forest region near the borders, principally along its southern margin. Potter County is underlain by sandstone, siltstone, shale, conglomerate, and minor amounts of coal and calcareous rock that range in age from Late Devonian to Pennsylvanian. These rocks form broad open folds that strike northeast. South of the border of the Wisconsin drift, and possibly at two localities inside the drift border, are scattered remnants of ancient soils (here called paleosol), that were formed in preWisconsin time-probably during the Sangamon interglacial stage. This paleosol ranges in texture from clay loam to silt loam, ranges in color from yellowish red to red, includes a few percent to more than 25 percent of rock fragments, and apparently contains a small percentage of gibbsite and varying amounts of kaolinite. Known thicknesses range from 1 to 33 feet. Paleosol was developed on diverse kinds of parent material, such as till, stratified drift, colluvium, and residuum, at altitudes ranging from a few hundred to 2,400 feet. The climatic conditions under which the paleosol formed are uncertain; however, these ancient soils may record an episode of subtropical climatic conditions during which lateritic soils were formed. Perhaps these soils are analogous to the Red-Yellow Podzolic soils of southeastern United States. Except for one possible remnant, no pre-Wisconsin drift has been recognized in Potter County. The Wisconsin glacial deposits of Potter County belong to either the Iowan or Tazewell substages and are dominantly till with minor amounts of glaciofluvial deposits. Erratics of igneous or metamorphic rock comprise less than 0.1 percent of the total number of rock fragments. The till is slightly weathered to depths ranging from 3 to about 12 feet. The drift border is indefinite and has been drawn at the southern limit of erratics or well-rounded or striated pebbles and is only locally marked by a terminal moraine or by a distinct change in the surficial deposits. The drift border is relatively straight and crosses the Genesee quadrangle in a northwesterly direction with little regard for the major topographic features, thus suggesting that the Wisconsin ice sheet had a relatively straight and steep front. Over most of the unglaciated part of Potter County, the bedrock is concealed beneath rubble that probably was formed during the Iowan or Tazewell substage, almost contemporaneously with the adjacent drift. In general, the rubble is thickest and most extensive within about 10 miles of the drift border, becoming thinner and less continuous farther away. The apparent parallelism between a belt of thick periglacial deposits and the drift border suggests that the deposits result from climatic factors in operation while the Wisconsin ice sheet was nearby. Ancient soil structures or patterned ground occur at, or near, the surface of both the periglacial deposits and the adjacent drift. These ancient soil structures are so similar to modern forms in arctic or alpine environments that they are considered to be the result of vigorous frost action. Many of the structures are believed to be a result of down-slope movement of debris by solifluction, facilitated by a frozen subsoil as much as 10 feet deep. Perennially frozen ground may have been present, but this is not a prerequisite. The periglacial deposits underlie long smooth slopes that extend from ridge crest to valley bottom. Flood plains are absent near the headwaters of many streams, the valley walls forming a V-shaped profile. While frost action was in progress, forests probably were restricted to flood plains, lower slopes, and scattered upland areas. Large parts of the upland were bare or partly covered by tundra vegetation; elsewhere, there were scattered trees but no dense forest. 1 2 SURFICIAL GEOLOGY AND GEOMORPHOLOGY OF POTTER COUNTY, PENNSYLVANIA Recent alluvium and alluvial fans include sand and sandy loams, 1 to 3 feet thick, that overlie gravel. The alluvium contains organic matter and lenses of finer materials. Thickness ranges from a few to more than 100 feet. Along the principal streams the alluvium probably overlies Pleistocene deposits. Most of the alluvial fans are composed of unstratified rubbly, pebbly, cobbly. or bouldery sandy loams to silty clay loams with local lenses of stratified sand and gravel. The alluvial fans mapped in the Genesee quadrangle probably include both Wisconsin stage and Recent deposits. The summits of the A.ppalachian Plateaus in north-central Pennsylvania have long been recognized as the remnants or traces of one or more peneplains. To test this hypothesis, a restored contour map was prepared to show the configuration of a supposed peneplain on the assumption that the plateau tops are remnants of such an old erosion surface. The restored contours delineate a surface that corresponds roughly to rock structure. In general, the uplands slope parallel to the dip of the bedrock. The major streams, such as the West Branch Susquehanna River, cross the ridges and valleys of the restored surface in such a way that it is difficult to suppose that the restored surface was ever graded to these streams. On the contrary, it is probable that the restored surface never existed and that the plateau tops are structurally controlled surfaces held up by sandstone and conglomerate beds in the Pottsville and Pocono formations. The plateau tops may have been lowered by erosion as much as 200 feet during the Pleistocene-in other words, after the major streams were incised. If this portion of the Appalachian Plateaus was ever reduced to a peneplain, such a hypothetical surface must have lain many hundreds of feet above the uplands of the present day. The only alternative that might involve peneplanation is the improbable hypothesis that the plateau tops are remnants of a slightly deformed peneplain and that the peneplain was folded along the axes of the Appalachian orogeny. This remote possibility is not supported by any known evidence. The geomorphic analysis yields no new data on the origin of the cross-axial drainage. Regardless of whether the plateaus are peneplain remnants or are structurally controlled surfaces, the beginning of the major southeastward-flowing streams long antedates the existing landscape. The geomorphic history of Potter County begins with an assumed long interval of erosion during the Mesozoic and early Cenozoic eras, for which no record remains in this area. The southeast master drainage was established by the latter part of the Tertiary period (perhaps at a much earlier date), probably as the result of the northwestward migration of the Atlanticinterior divide. In late Pliocene(?) time, areas adjacent to parts of the West Branch Susquehanna River-and probably elsewhere-had a moderate relief ranging from 300 to 700 feet. Some segments of the West Branch meandered across a broad valley that lay about 900 feet above the present streams. The landscape probably was covered by deep residual soils, perhaps by saprolite. The early Pleistocene history of Potter County is essentially unknown. No deposits of the Kansan stage are known except for a possible trace of pre-Illinoian drift on the uplands in central Potter County (Ayers Hill quadrangle). Some deposits in central and eastern Pennsylvania may be of Kansan age. It is probable that the assumed Aftonian regolith was removed by mass movements and other processes during the Kansan stage, thus resulting in a lowering of the plateau tops by as much as 10 feet. By the close of the Yarmouth(?) interglacial stage the major streams were incised to essentially their present depths. The climates of the Yarmouth interglacial stage probably produced deep residual soils over the landscape, parts of which may still be preserved in the paleosol remnants of the present day. No Illinoian drift is known in Potter County, but drift assigned to this stage occurs in areas to the northwest and to the southeast. Some valleys, such as Kettle Creek valley, were filled with sand and gravel alluvium to depths of as much as 150 feet above their present flood plains. It is assumed that the Yarmouth residual soils were removed by mass movements and other processes induced by a periglacial climate, thus lowering the plateau tops by as much as 10 feet. During the Sangamon interglacial stage, deep (10-to-20 foot) residual soils or paleosol were developed in Potter County and probably throughout much of Pennsylvania, perhaps as a result of lateritic weathering in a subtropical climate. It is possible that the paleosol was largely removed by mass movements and by running water during late Sangamon time. During either the Iowan or Tazewell substages of the Wisconsin (perhaps the Iowan), the ice sheet advanced into the northeastern part of Potter County. The drift is similar to the Olean drift (local usage). The paleosol was almost completely removed by mass movements and other processes induced· by a periglacial climate, prior to drift deposition. This removal probably resulted in a lowering of the plateau tops by as much as 10 feet since Sangamon time. Nearly contemporaneously with drift deposition, the periglacial deposits were formed by frost heaving, solifluction, and fluvial transport in areas outside the drift border. Soil structures or patterned ground were developed on both the drift and the periglacial deposits. It is probable that the forests in the periglacial area were greatly restricted and that large areas on the uplands were essentially treeless. Little is known about the history of Potter County in postOlean time. Presumably, forests completely covered the county by the onset of the next substage, during which the Binghamton drift of MacClintock and Apfel was deposited. This drift also is found in southern New York State. The formation of the alluvium and alluvial fans probably began in the Tazewell substage and continued during the Recent epoch. Since these deposits were formed there has been very little dissection. There is little, if any, difference between soils developed on periglacial deposits and soils developed on drift. The roots of fallen trees have disturbed the soil horizons, and it is unlikely that the existing soil profiles are more than 500 years old. The forested landscape of Potter County has a distinctive microrelief ranging from a few inches to a few feet of mounds and pits produced by the roots of fallen trees. Most mounds and pits range from 10 to 20 feet in length and from 6 to 15 feet in width. On level land, many mounds are oriented with their long axes trending northward, and in some areas the orientation is random. On slopes, the mounds are oriented with their long axes at right angles to the maximum slope as a result of trees falling downslope. The toppling of trees increases the permeability of surficial deposits and mixes and destroys the soil horizons. The microrelief is a factor in forest development. The toppling of trees on slopes is a significant agent of slope erosion. The process loosens, breaks up, or overturns the upper 2 to 3 feet of the forest soil, and it tends to make the surficial layer more stony and to produce features resembling soil structures.

Pennsylvania↗

Ground-water resources data for Baldwin County, Alabama

Geologic and hydrologic data for 237 wells were collected, and water-levels in 223 wells in Baldwin and Escambia Counties were measured. Long-term water water-level data, available for many wells, indicate that ground-water levels in most of Baldwin County show no significant trends for the period of record. However, ground-water levels have declined in the general vicinity of Spanish Fort and Daphne, and ground-water levels in the Gulf Shores and Orange Beach areas are less than 5 feet above sea level in places. The quality of ground water generally is good, but problems with iron, sulfur, turbidity, and color occur. The water from most private wells in Baldwin County is used without treatment or filtration. Alabama public- health law requires that water from public-supply wells be chlorinated. Beyond that, the most common treatment of ground water by public-water suppliers in Baldwin County consists of pH adjustment, iron removal, and aeration. The transmissivity of the Miocene-Pliocene aquifer was determined at 10 locations in Baldwin County. Estimates of transmissivity ranged from 700 to 5,400 feet squared per day. In general, aquifer transmissivity was greatest in the southeastern part of the county, and least in the western part of the county near Mobile Bay. A storage coefficient of 1.5 x 10-3 was determined for the Miocene-Pliocene aquifer near Loxley.

Open-File Report↗