SEARCH · USGS Science

Results for “Rocks & Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75Linked to original sources

USGS1973

An empirical NaKCa geothermometer for natural waters

An empirical method of estimating the last temperature of water-rock interaction has been devised. It is based upon molar Na, K and Ca concentrations in natural waters from temperature environments ranging from 4 to 340°C. The data for most geothermal waters cluster near a straight line when plotted as the function log ( Na K ) + β log [ √ (Ca) Na ] "> log (NaK) + β log [ √(Ca)Na] vs reciprocal of absolute temperature, where β is either 1 3 "> 13 or 4 3 "> 43 depending upon whether the water equilibrated above or below 100°C. For most waters tested, the method gives better results than the Na K "> NaK methods suggested by other workers. The ratio Na K "> NaK should not be used to estimate temperature if √ ( M Ca ) M Na "> √ (MCa)MNa is greater than 1. The Na K "> NaK values of such waters generally yield calculated temperatures much higher than the actual temperature at which water interacted with the rock. A comparison of the composition of boiling hot-spring water with that obtained from a nearby well (170°C) in Yellowstone Park shows that continued water-rock reactions may occur during ascent of water even though that ascent is so rapid that little or no heat is lost to the country rock, i.e. the water cools adiabatically. As a result of such continued reaction, waters which dissolve additional Ca as they ascend from the aquifer to the surface will yield estimated aquifer temperatures that are too low. On the other hand, waters initially having enough Ca to deposit calcium carbonate during ascent may yield estimated aquifer temperatures that are too high if aqueous Na and K are prevented from further reaction with country rock owing to armoring by calcite or silica minerals. The Na-K-Ca geothermometer is of particular interest to those prospecting for geothermal energy. The method also may be of use in interpreting compositions of fluid inclusions.

Wyoming↗

USGS2016

The chemistry and isotopic composition of waters in the low-enthalpy geothermal system of Cimino-Vico Volcanic District, Italy

Geothermal energy exploration is based in part on interpretation of the chemistry, temperature, and discharge rate of thermal springs. Here we present the major element chemistry and the δD, δ 18 O, 87 Sr/ 86 Sr and δ 11 B isotopic ratio of groundwater from the low-enthalpy geothermal system near the city of Viterbo in the Cimino-Vico volcanic district of west-Central Italy. The geothermal system hosts many thermal springs and gas vents, but the resource is still unexploited. Water chemistry is controlled by mixing between low salinity,HCO 3 -rich fresh waters (<24.2°C) flowing in shallow volcanic rocks and SO 4 -rich thermal waters (25.3°C to 62.2°C) ascending from deep, high permeability Mesozoic limestones. The (equivalent) SO 4 /Cl (0.01–0.02), Na/Cl (2.82–5.83) and B/Cl ratios (0.02–0.38) of thermal waters differs from the ratios in other geothermal systems from Central Italy, probably implying a lack of hydraulic continuity across the region. The δ 18 O (−6.6‰ to −5.9‰) and δD (−40.60‰ to −36.30‰) isotopic composition of spring water suggest that the recharge area for the geothermal system is the summit region of Mount Cimino. The strontium isotope ratios ( 87 Sr/ 86 Sr) of thermal waters (0.70797–0.70805) are consistent with dissolution of the Mesozoic evaporite-carbonate units that constitute the reservoir, and the ratios of cold fresh waters mainly reflect shallow circulation through the volcanic cover and some minor admixture (<10%) of thermal water as well. The boron isotopic composition (δ 11 B) of fresh waters (−5.00 and 6.12‰) is similar to that of the volcanic cover, but the δ 11 B of thermal waters (−8.37‰ to −4.12‰) is a mismatch for the Mesozoic reservoir rocks and instead reflects dissolution of secondary boron minerals during fluid ascent through flysch units that overlie the reservoir. A slow and tortuous ascent enhances extraction of boron but also promotes conductive cooling, partially masking the heat present in the reservoir. Overall data from this study is consistent with previous studies that concluded that the geothermal system has a large energy potential.

Journal of Volcanology and Geothermal Research↗

USGS2022

Hyperspectral remote sensing of white mica: A review of imaging and point-based spectrometer studies for mineral resources, with spectrometer design considerations

Over the past ~30 years, hyperspectral remote sensing of chemical variations in white mica have proven to be useful for ore deposit studies in a range of deposit types. To better understand mineral deposits and to guide spectrometer design, this contribution reviews relevant papers from the fields of remote sensing, spectroscopy, and geology that have utilized spectral changes caused by chemical variation in white micas. This contribution reviews spectral studies conducted at the following types of mineral deposits: base metal sulfide, epithermal, porphyry, sedimentary rock hosted gold deposits, orogenic gold, iron oxide copper gold, and unconformity-related uranium. The structure, chemical composition, and spectral features of white micas, in this contribution defined as muscovite, paragonite, celadonite, phengite, illite, and sericite, are given. Reviewed laboratory spectral studies determined that shifts in the position of the white mica 2200 nm combination feature of 1 nm correspond to a change in Al oct content of approximately ±1.05%. Many of the reviewed spectral studies indicated that a shift in the position of the white mica 2200 nm combination feature of 1 nm was geologically significant. A sensitivity analysis of spectrometer characteristics; bandpass, sampling interval, and channel position, is conducted using spectra of 19 white micas with deep absorption features to determine minimum characteristics required to accurately measure a shift in the position of the white mica 2200 nm combination feature. It was determined that a sampling interval < 16.3 nm and bandpass <17.5 nm are needed to achieve a root mean square error (RMSE) of 2 nm, whereas a sampling interval < 8.8 nm and bandpass <9.8 nm are needed to achieve a RMSE of 1 nm. For comparison, commonly used imaging spectrometers HyMap, AVIRIS-Classic, SpecTIR®'s AisaFENIX 1K, and HySpex tm SWIR 384 have 2.1, 1.2, 0.96, and 0.95 nm RMSE in determining the position of the 2200 nm white mica combination feature, respectively. An additional sensitivity analysis is conducted to determine the effect of signal to noise ratio (SNR) on the RMSE of the position of the white mica 2200 nm combination feature, using spectra of 18 white micas with deep absorption features. For a spectrometer with sampling interval and bandpass of 1 nm, we estimate that RMSEs of 1 and 1.5 nm are achievable with spectra having a minimum SNR of approximately 246 and 64, respectively. For a spectrometer with sampling interval and bandpass of 5 nm, we estimate that RMSEs of 1 and 1.5 nm are attainable with spectra having a minimum SNR of approximately 431 and 84, respectively. When using a spectrometer with a sampling interval 8.8 nm and a bandpass of 9.8 nm, a RMSE of 1 is only achievable with convolved, noiseless reference spectra. For the 8.8_9.8 nm spectrometer, spectra with SNR of 250 and 100 result in RMSE of 1.1 and 1.3, respectively. Therefore, fine spectral resolution characteristics achieve RMSEs better than 1 nm for high SNR spectra while spectrometers with coarse spectral resolution have larger RMSE, perform well with noisy data, and are useful for white mica studies if RMSE of 1.1 to 1.5 nm is acceptable.

Remote Sensing of Environment↗

USGS2001

Constraining controls on carbonate sequences with high-resolution chronostratigraphy: Upper Miocene, Cabo de Gata region, SE Spain

A high-resolution chronostratigraphy has been developed for Miocene shallow-water carbonate strata in the Cabo de Gata region of SE Spain for evaluation of local, regional and global factors that controlled platform architecture prior to and during the Messinian salinity crisis. Paleomagnetic data were collected from strata at three localities. Mean natural remanent magnetization (NRM) ranges between 1.53 ?? 10-8 and 5.2 ?? 10-3 Am2/kg. Incremental thermal and alternating field demagnetization isolated the characteristic remanent magnetization (ChRM). Rock magnetic studies show that the dominant magnetic mineral is magnetite, but mixtures of magnetite and hematite occur. A composite chronostratigraphy was derived from five stratigraphic sections. Regional stratigraphic data, biostratigraphic data, and an 40Ar/39Ar date of 8.5 ?? 0.1 Ma, for an interbedded volcanic flow, place the strata in geomagnetic polarity Chrons C4r to C3r. Sequence-stratigraphic and diagenetic evidence indicate a major unconformity at the base of depositional sequence (DS)3 that contains a prograding reef complex, suggesting that approximately 250 000 yr of record (Subchrons C3Br.2r to 3Br.1r) are missing near the Messinian-Tortonian boundary. Correlation to the GPTS shows that the studied strata represent five third- to fourth-order DSs. Basal units are temperate to subtropical ramps (DS1A, DS1B, DS2); these are overlain by subtropical to tropical reefal platforms (DS3), which are capped by subtropical to tropical cyclic carbonates (Terminal Carbonate Complex, TCC). Correlation of the Cabo de Gata record to the Melilla area of Morocco, and the Sorbas basin of Spain indicate that early - Late Tortonian ramp strata from these areas are partially time-equivalent. Similar strata are extensively developed in the Western Mediterranean and likely were influenced by a cool climate or influx of nutrients during an overall rise in global sea-level. After ramp deposition, a sequence boundary (SB3) in Cabo de Gata correlates with a sequence boundary in Morocco and a published third-order eustatic fall suggesting at least a partial eustatic control for the sequence boundary. Coral reefs began to develop earlier in Cabo de Gata than at Melilla or Sorbas, arguing for local factors affecting this major environmental transition. Later Messinian reefs (DS3) from all areas are time-equivalent, suggesting a regional or global control on their formation. Some Halimeda-rich horizons in the Western Mediterranean are not time-equivalent event strata as hypothesized by others. Correlation of the relative sea-level curve for the fringing reef complex (DS3) with a published eustatic curve suggests at least a partial third-order global eustatic control for the highstand part of the sequence. Downstepping DS3 reefs and initial subaerial exposure of earlier DS3 reef strata approximately correlate with initiation of a series of subaerial unconformities in the South Pacific. The longer-term relative fall in sea-level during DS3 downstepping reef progradation does not correlate with a published third-order eustatic fall. Eustatic sea-level fluctuations may have been associated with initiation of the Mediterranean Messinian salinity crisis, but the longer-term fall may have been linked to tectonic uplift in the Mediterranean region. Widespread distribution of 'TCC-style' cycles of approximately the same age suggests a regional (Western Mediterranean) or global control on sea-level change responsible for TCC cycles. In addition, four subaerial exposure-capped TCC cycles may correlate with similar subaerial unconformities in the South Pacific, suggesting at least a partial eustatic control on TCC cyclicity. The high rates of relative sea-level change needed to generate a minimum of 25-30 m sea-level changes associated with each cycle are consistent with glacio-eustacy along with rapid evaporitic drawdown in the Mediterranean. ?? 2001 Elsevier Science B.V. All rights reserved.

Palaeogeography, Palaeoclimatology, Palaeoecology↗

USGS1948

Petrography of Iwo Jima

The rocks of Iwo Jima are augite and augite-hornblende trachyandesites, distinctly more alkalic than the ordinary andesites of Japanese volcanoes or the average world andesite. They are described, and chemical analyses are listed. Fumarolic gases have altered some rocks to a mixture of opal and clay minerals and have cemented tuff with opal, calcite, zeolite, and iron oxides.

Iwo Jima↗

USGS1997

Late-stage sinking of plutons

Many granodiorite to diorite plutons in the Great Basin of western North America are surrounded by rim monoclines or anticlines that suggest relative downward movement of the plutons while wall rocks were hot and ductile. We propose that such plutons rise to a level of approximately neutral buoyancy and then founder as their densities increase ≈10% during crystallization. Late-stage sinking of intermediate to mafic plutons should be common when wall rocks are rich in weak, low-density minerals such as quartz and calcite. Structures related to sinking will overprint those related to initial pluton emplacement and may be mistaken for regional tectonic structures.

Geology↗

USGS1997

Potential for new nickel-copper sulfide deposits in the Lake Superior region

Scientists from the U.S. Geological Survey are evaluating the potential for undiscovered sulfide deposits containing varying amounts of nickel, copper, platinum-group metals, and cobalt in the Lake Superior region as part of an ongoing effort to assess the mineral potential of the United States. Similarities between rocks of the Midcontinent rift and rocks that host the Voisey Bay nickel-copper-cobalt deposit in Labrador, Canada, and the Noril'sk nickel-copper-platinum-group-metals deposits in Russia suggest a high potential for such sulfide deposits in rocks associated with the 1.1-billion-year-old Midcontinent rift in the Lake Superior region.

Lake Superior↗

USGS2023

Assessment of lunar resource exploration in 2022

The idea of mining the Moon, once purely science-fiction, is now on the verge of becoming reality. Taking advantage of the resources on the Moon is part of the plans of many nations and some enterprising commercial entities; demonstrating in-situ (in place) resource utilization near the lunar south pole is an explicit goal of the United States’ Artemis program. Economic extraction and sustainable management of these resources require understanding the nature, quantity, and quality of each resource. This publication aims to provide a relatively simple, but technically rigorous, assessment of the status of lunar resource exploration in 2022. Building on the experience of the U.S. Geological Survey in conducting resource assessments for Earth, we propose a general methodology for quantitative lunar resources assessments. Lunar resources can be categorized as energy, mineral, and water and classified with respect to their certainty and their recoverability. The portion of the technically recoverable resource that can be converted to a commodity within budgetary and other mission constraints can be classified as a “reserve.” For energy resources, solar energy is known to be especially abundant along some high ridges near the lunar poles and the technology to exploit it is mature. Mineral resources, largely in the form of loose rock powder that covers the surface of the Moon, are also widely accessible in large quantities. Many different technologies to convert this material into useful commodities (such as landing pads and oxygen) are currently being developed and are likely to be available for industrial-scale application within 30 years. Water ice almost certainly exists in the polar regions of the Moon but there are fundamental unanswered questions about when and how the ice formed—leaving us without knowledge of the form, quantity, quality, and distribution of lunar ice. Until rover missions bring new ground truth data, lunar ice will remain a highly speculative resource that may be both limited and non-renewable.

Circular↗

USGS1968

Favorable areas for prospecting adjacent to the Roberts Mountains thrust in southern Lander County, Nevada

Recent geologic mapping by the U.S. Geological Survey of more than 2,500 square miles of a relatively little-studied part of central Nevada has outlined four areas favorable for the discovery of metallic mineral deposits. In these areas, lower Paleozoic carbonate rocks crop out below the Roberts Mountains thrust, a widespread fault in central and north-central Nevada. These areas have a stratigraphic and structural setting similar to that of the areas where large, open-pit gold deposits have been discovered recently at Carlin and Cortez in north-central Nevada.

Circular↗

USGS1990

Map showing drill-hole depths, lithologic intercepts, and partial isopachs of basin fill in the Winnemucca 1 degree by 2 degrees quadrangle, Nevada

The purpose of this map is to aid in the mineral-resource assessment and exploration of covered host rocks by displaying and interpreting data that can be used to estimate the depth of basin fill in the Winnemucca 1° by 2° quadrangle, Nevada. Publicly available information used in making this map includes water, petroleum, and geothermal well data, gravity data and models, seismic profiles, and geologic and geomorphic reports. Wells logs used for this map of the Winnemucca quadrangle are from the following sources: (1) logs of more than 1,000 water wells reported to the State of Nevada Division of Water Resources, which are on file with them in Reno and at the with U.S. Geological Survey in Carson City, (2) 44 petroleum wells collected by the Nevada Bureau of Mines (Lintz, 1957; Schilling and Garside, 1968; Garside and Schilling, 1977, Garside and others, 1977; 1988), and (3) Two geothermal wells reported in Zoback (1979) and Flynn and others (1982). Data from isostatic residual and Bouguer gravity maps by Wagini (1985) contributed to the interpretation of basin configuration. Gravity models of Dixie Valley (Schaefer, 1982, and Speed, 1976) and Grass Valley (Grannell and Noble, 1977) and seismic profiles of Grass and Pine Valleys (Potter and others, 1987) helped refine basis interpretations in those areas. The geologic base map of Paleozoic and Mesozoic igneous and sedimentary rocks, Tertiary volcanic and sedimentary rocks, and Cenozoic structures was simplified from Stewart and Carlson (1976b).

Nevada↗

USGS1972

Ground-water resources and geology of Cook County, Georgia

Aquifer-performance tests and aquifer studies indicate that the limestone beneath the city of Adel and probably most of Cook County contains potable water to a depth of only about 400 to 500 feet and that "deep" wells that tap these limestones obtain most of their water from a few thin, highly permeable zones rather than from the entire thickness of the rocks. Below about 500 feet the water is mineralized and not potable without treatment. The yield of "shallow wells" is variable and the water generally is corrosive and at places contains appreciable dissolved iron. The volume of ground water flowing through the Suwannee and Marianna Limestones in Cook County and available for development to properly spaced wells and well fields is estimated to be about 18,000,000 gallons per day. That in the Tampa Foundation is estimated to be about 1,500,000 gallons per day. Water levels near the center of the Adel well field have declined 38 feet since 1890 and presently are declining at a rate of 1.6 feet per year.

Georgia↗

USGS1983

Reconnaissance geology of the Thaniyah Quadrangle, sheet 20/42 C, Kingdom of Saudi Arabia

The Thaniyah quadrangle, sheet 20/42 C, is located in the transition zone between the Hijaz Mountains and the Najd Plateau of southwestern Saudi Arabia between lat 20?00' and 20?30' N., long 42?00' to 42?30' E. The quadrangle is underlain by Precambrian metavolcanic, metasedimentary, plutonic, and dike rocks. Metavolcanic rocks consist of metamorphosed basalt and andesite with minor dacite and rhyolite and underlie three discontinuous northwest-trending belts. Metasedimentary rocks are confined to small areas underlain by quartzite, metasandstone, marble, and calc-silicate rock. Plutonic rocks include an extensive unit of tonalite and quartz diorite and a smaller unit of diorite and quartz diorite, which occupy much of the central part of the quadrangle. A small body of diorite and gabbro and a two-part zone of tonalite gneiss are also present. All of these plutonic rocks are assigned to the An Nimas batholith. Younger plutonic rocks include extensive graphic granite and rhyolite in the northeastern part of the quadrangle and several smaller bodies of granitic rocks and of gabbro. The metavolcanic rocks commonly have strong foliation with northwest strike and steep to vertical dip. Diorite and quartz diorite are sheared and brecciated and apparently syntectonic. Tonalite and quartz diorite are both foliate and nonfoliate and were intruded in episodes both preceding and following shearing. The granitic rocks and gabbro are post-tectonic. Trends of faults and dikes are mostly related to the Najd faulting episode. Radiometric ages, mostly from adjacent quadrangles, suggest that the An Nimas batholith is 835 to 800 Ma, gabbro and granite, except the graphic granite and rhyolite unit, are about 640 to 615 Ma, and the graphic granite and rhyolite 575 to 565 Ma old. Metavolcanic rocks similar to those hosting copper and gold mineralization in the Wadi Shuwas mining district adjacent to the southwestern part of the quadrangle are abundant. An ancient copper mine was discovered at the edge of the tonalite gneiss belt east of Wadi Ranyah. Granite and gabbro have economic potential as building stone.

Open-File Report↗

USGS1990

Electromagnetic, magnetic, and gravimetric surveys at the Bi'r Jarbuah gold prospect, Kingdom of Saudi Arabia

Bi'r Jarbuah is a potential gold-bearing site located east of the Ishmas gold district in the southeastern part of the Arabian Shield. Surface rocks are mostly diorite and granodiorite plutons and the metavolcanic and metasedimentary rocks they have intruded. Extensive thin alluvial deposits cover approximately 40 percent of the area studied. Diorite, granodiorite, aplite porphyry, granite, granite pegmatite, and mafic dikes intrude the plutons and the metavolcanic and metasedimentary rocks. Veins of quartz, carbonate materials, and associated carbonate-altered rocks containing limonite and hematite cut all rock types. The veins were extensively mined by ancient people, and recent trenching has revealed small amounts of free gold associated with these veins and adjacent altered country rocks. A detailed search for gold and associated minerals was begun in the Bi'r Jarbuah area in 1988. Crone electromagnetic (CEM), magnetic, and gravimetric surveys were run in the areas of greatest interest. Anomalous areas are most interesting in the southern part of the area where linear magnetic and gravity anomalies trend east-northeast and overlap in large part. They are most prominent at or near the south end of a diorite pluton where some quartz veins mined by the ancients also trend northeast. A second area, at the extreme southern end of the survey, contains a large CEM anomaly that coincides with northeast-trending magnetic and gravity anomalies. Although this second area is largely overlain by alluvium, a major quartz vein strikes to the northeast in the adjacent bedrock.

Open-File Report↗

USGS2011

Borehole geophysical investigation of a formerly used defense site, Machiasport, Maine, 2003-2006

The U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, collected borehole geophysical logs in 18 boreholes and interpreted the data along with logs from 19 additional boreholes as part of an ongoing, collaborative investigation at three environmental restoration sites in Machiasport, Maine. These sites, located on hilltops overlooking the seacoast, formerly were used for military defense. At each of the sites, chlorinated solvents, used as part of defense-site operations, have contaminated the fractured-rock aquifer. Borehole geophysical techniques and hydraulic methods were used to characterize bedrock lithology, fractures, and hydraulic properties. In addition, each geophysical method was evaluated for effectiveness for site characterization and for potential application for further aquifer characterization and (or) evaluation of remediation efforts. Results of borehole geophysical logging indicate the subsurface is highly fractured, metavolcanic, intrusive, metasedimentary bedrock. Selected geophysical logs were cross-plotted to assess correlations between rock properties. These plots included combinations of gamma, acoustic reflectivity, electromagnetic induction conductivity, normal resistivity, and single-point resistance. The combined use of acoustic televiewer (ATV) imaging and natural gamma logs proved to be effective for delineating rock types. Each of the rock units in the study area could be mapped in the boreholes, on the basis of the gamma and ATV reflectivity signatures. The gamma and mean ATV reflectivity data were used along with the other geophysical logs for an integrated interpretation, yielding a determination of quartz monzonite, rhyolite, metasedimentary units, or diabase/gabbro rock types. The interpretation of rock types on the basis of the geophysical logs compared well to drilling logs and geologic mapping. These results may be helpful for refining the geologic framework at depth. A stereoplot of all fractures intersecting the boreholes indicates numerous fractures, a high proportion of steeply dipping fractures, and considerable variation in fracture orientation. Low-dip-angle fractures associated with unloading and exfoliation are also present, especially at a depth of less than 100 feet below the top of casing. These sub-horizontal fractures help to connect the steeply dipping fractures, making this a highly connected fracture network. The high variability in the fracture orientations also increases the connectivity of the fracture network. A preliminary comparison of all fracture data from all the boreholes suggests fracturing decreases with depth. Because all the boreholes were not drilled to the same depth, however, there is a clear sampling bias. Hence, the deepest boreholes are analyzed separately for fracture density. For the deepest boreholes in the study, the intensity of fracturing does not decline significantly with depth. It is possible the fractures observed in these boreholes become progressively tighter or closed with depth, but this is difficult to verify with the borehole methods used in this investigation. The fact that there are more sealed fractures at depth (observed in optical televiewer logs in some of the boreholes) may indicate less opening of the sealed fractures, less water moving through the rock, and less weathering of the fracture infilling minerals. Although the fracture orientation remained fairly constant with depth, differences in the fracture patterns for the three restoration sites indicate the orientation of fractures varies across the study area. The fractures in boreholes on Miller Mountain predominantly strike northwest-southeast, and to a lesser degree they strike northeast. The fractures on or near the summit of Howard Mountain strike predominantly east-west and dip north and south, and the fractures near the Transmitter Site strike northeast-southwest and dip northwest and southeast. The fracture populations for the boreholes on or near the summit of Howard Mountain show more variation than at the other two sites. This variation may be related to the proximity of the fault, which is northeast of the summit of Howard Mountain. In a side-by-side comparison of stereoplots from selected boreholes, there was no clear correspondence between fracture orientation and proximity to the fault. There is, however, a difference in the total populations of fractures for the boreholes on or near the summit of Howard Mountain and the boreholes near the Transmitter Site. Further to the southwest and further away from the fault, the fractures at the Transmitter Site predominantly strike northeast-southwest and northwest-southeast.Heat-pulse flowmeter (HPFM) logging was used to identify transmissive fractures and to estimate the hydraulic properties along the boreholes. Ambient downflow was measured in 13 boreholes and ambient upflow was measured in 9 boreholes. In nine other bedrock boreholes, the HPFM did not detect measurable vertical flow. The observed direction of vertical flow in the boreholes generally was consistent with the conceptual flow model of downward movement in recharge locations and upward flow in discharge locations or at breaks in the slope of land surface. Under low-rate pumping or injection rates [0.25 to 1 gallon per minute (gal/min)], one to three inflow zones were identified in each borehole. Two limitations of HPFM methods are (1) the HPFM can only identify zones within 1.5 to 2 orders of magnitude of the most transmissive zone in each borehole, and (2) the HPFM cannot detect flow rates less than 0.010 + or - 0.005 gal/min, which corresponds to a transmissivity of about 1 foot squared per day (ft2/d). Consequently, the HPFM is considered an effective tool for identifying the most transmissive fractures in a borehole, down to its detection level. Transmissivities below that cut-off must be measured with another method, such as packer testing or fluid-replacement logging. Where sufficient water-level and flowmeter data were available, HPFM results were numerically modeled. For each borehole model, the fracture location and measured flow rates were specified, and the head and transmissivity of each fracture zone were adjusted until a model fit was achieved with the interpreted ambient and stressed flow profiles. The transmissivities calculated by this method are similar to the results of an open-hole slug test; with the added information from the flowmeter, however, the head and transmissivity of discrete zones also can be determined. The discrete-interval transmissivities ranged from 0.16 to 330 ft2/d. The flowmeter-derived open-hole transmissivity, which is the combined total of each of the transmissive zones, ranged from 1 to 511 ft2/d. The whole-well open-hole transmissivity values determined with HPFM methods were compared to the results of open-hole hydraulic tests. Despite the fact that the flowmeter-derived transmissivities consistently were lower than the estimates derived from open-hole hydraulic tests alone, the correlation was very strong (with a coefficient of determination, R2, of 0.9866), indicating the HPFM method provides a reasonable estimate of transmissivities for the most transmissive fractures in the borehole. Geologic framework, fracture characterization, and estimates of hydraulic properties were interpreted together to characterize the fracture network. The data and interpretation presented in this report should provide information useful for site investigators as the conceptual site groundwater flow model is refined. Collectively, the results and the conceptual site model are important for evaluating remediation options and planning or implementing the design of a well field and borehole completions that will be adequate for monitoring flow, remediation efforts, groundwater levels, and (or) water quality. Similar kinds of borehole geophysical logging (specifically the borehole imaging, gamma, fluid logs, and HPFM) should be conducted in any newly installed boreholes and integrated with interpretations of any nearby boreholes. If boreholes are installed close to existing or other new boreholes, cross-hole flowmeter surveys may be appropriate and may help characterize the aquifer properties and connections between the boreholes.

Maine↗

USGS1973

Metamorphic facies indicated by vein minerals in basal beds of the Great Valley sequence, northern California

A reexamination of reported blueschist mineral localities in the basal strata of the Great Valley sequence revealed only prehnite-pumpellyite facies minerals. Franciscan graywacke thrust below the Great Valley rocks contains lawsonite-quartz blueschist assemblages. At a common pressure of about 4 kb, the Franciscan blueschists formed at lower temperatures than the overlying Great Valley prehnite-bearing rocks, lending support to tectonic models that involve rapid subduction of the Franciscan rocks.

California↗

USGS2011

Contributions of Phosphorus from Groundwater to Streams in the Piedmont, Blue Ridge, and Valley and Ridge Physiographic Provinces, Eastern United States

Phosphorus from natural and human sources is likely to be discharged from groundwater to streams in certain geochemical environments. Water-quality data collected from 1991 through 2007 in paired networks of groundwater and streams in different hydrogeologic and land-use settings of the Piedmont, Blue Ridge, and Valley and Ridge Physiographic Provinces in the eastern United States were compiled and analyzed to evaluate the sources, fate, and transport of phosphorus. The median concentrations of phosphate in groundwater from the crystalline and siliciclastic bedrock settings (0.017 and 0.020 milligrams per liter, respectively) generally were greater than the median for the carbonate setting (less than 0.01 milligrams per liter). In contrast, the median concentrations of dissolved phosphate in stream base flow from the crystalline and siliciclastic bedrock settings (0.010 and 0.014 milligrams per liter, respectively) were less than the median concentration for base-flow samples from the carbonate setting (0.020 milligrams per liter). Concentrations of phosphorus in many of the stream base-flow and groundwater samples exceeded ecological criteria for streams in the region. Mineral dissolution was identified as the dominant source of phosphorus in the groundwater and stream base flow draining crystalline or siliciclastic bedrock in the study area. Low concentrations of dissolved phosphorus in groundwater from carbonate bedrock result from the precipitation of minerals and (or) from sorption to mineral surfaces along groundwater flow paths. Phosphorus concentrations are commonly elevated in stream base flow in areas underlain by carbonate bedrock, however, presumably derived from in-stream sources or from upland anthropogenic sources and transported along short, shallow groundwater flow paths. Dissolved phosphate concentrations in groundwater were correlated positively with concentrations of silica and sodium, and negatively with alkalinity and concentrations of calcium, magnesium, chloride, nitrate, sulfate, iron, and aluminum. These associations can result from the dissolution of alkali feldspars containing phosphorus; the precipitation of apatite; the precipitation of calcite, iron hydroxide, and aluminum hydroxide with associated sorption of phosphate ions; and the potential for release of phosphate from iron-hydroxide and other iron minerals under reducing conditions. Anthropogenic sources of phosphate such as fertilizer and manure and processes such as biological uptake, evapotranspiration, and dilution also affect phosphorus concentrations. The phosphate concentrations in surface water were not correlated with the silica concentration, but were positively correlated with concentrations of major cations and anions, including chloride and nitrate, which could indicate anthropogenic sources and effects of evapotranspiration on surface-water quality. Mixing of older, mineralized groundwater with younger, less mineralized, but contaminated groundwater was identified as a critical factor affecting the quality of stream base flow. In-stream processing of nutrients by biological processes also likely increases the phosphorus concentration in surface waters. Potential geologic contributions of phosphorus to groundwater and streams may be an important watershed-management consideration in certain hydrogeologic and geochemical environments. Geochemical controls effectively limit phosphorus transport through groundwater to streams in areas underlain by carbonate rocks; however, in crystalline and siliciclastic settings, phosphorus from mineral or human sources may be effectively transported by groundwater and contribute a substantial fraction to base-flow stream loads.

Scientific Investigations Report↗

USGS2019

Factors affecting the occurrence of lead and manganese in untreated drinking water from Atlantic and Gulf Coastal Plain aquifers, eastern United States—Dissolved oxygen and pH framework for evaluating risk of elevated concentrations

Groundwater samples collected during 2012 and 2013 from public-supply wells screened in the Atlantic and Gulf Coastal Plain aquifers of the eastern and southeastern U.S. rarely contained lead or manganese concentrations that exceeded drinking-water limits, despite having corrosive characteristics. Data indicate that the occurrence of dissolved lead and manganese in sampled groundwater, prior to its distribution or treatment, was related to several explanatory factors including the presence of source minerals, hydrologic position along the flow path, water-rock interactions, and associated geochemical conditions such as pH and dissolved oxygen (DO) concentrations. Elevated concentrations of lead compared to health-based benchmarks were associated with groundwater that is acidic (pH ≤ 6.5), oxygenated (DO ≥ 2 mg/L), and closer to recharge zones (relatively young water). Elevated concentrations of manganese were associated with groundwater that is acidic to neutral (pH ≤ 7.5), has low DO (<2 mg/L), and further from recharge zones (relatively old). Under these geochemical conditions, minerals that could sequester lead or manganese tended to be undersaturated, and adsorption by hydrous ferric oxide was limited. Under neutral to alkaline pH conditions, precipitation of impure calcium carbonate or phosphate compounds containing traces of lead or manganese (solid solutions) could maintain low concentrations of the trace elements. Additionally, adsorption of lead or manganese cations by hydrous ferric oxides (HFO) could be another attenuating factor where conditions are oxidizing and dissolved inorganic carbon concentrations are relatively low. A DO/pH framework was developed as a screening tool for evaluating risk of elevated lead or manganese, based on the occurrence of elevated lead and manganese concentrations and the corresponding distributions of DO and pH in the Atlantic and Gulf Coastal Plain aquifers. Validation of the DO/pH framework was accomplished using an independent national dataset that showed consistent results for elevated lead (pH ≤ 6.5; DO ≥ 2 mg/L) and manganese (pH ≤ 7.5; DO < 2 mg/L).

Atlantic and Gulf Coastal Plain aquifers↗

USGS2006

Characterization and petrologic interpretation of olivine-rich basalts at Gusev Crater, Mars

Rocks on the floor of Gusev crater are basalts of uniform composition and mineralogy. Olivine, the only mineral to have been identified or inferred from data by all instruments on the Spirit rover, is especially abundant in these rocks. These picritic basalts are similar in many respects to certain Martian meteorites (olivine-phyric shergottites). The olivine megacrysts in both have intermediate compositions, with modal abundances ranging up to 20-30%. Associated minerals in both include low-calcium and high-calcium pyroxenes, plagioclase of intermediate composition, iron-titanium-chromium oxides, and phosphate. These rocks also share minor element trends, reflected in their nickel-magnesium and chromium-magnesium ratios. Gusev basalts and shergottites appear to have formed from primitive magmas produced by melting an undepleted mantle at depth and erupted without significant fractionation. However, apparent differences between Gusev rocks and shergottites in their ages, plagioclase abundances, and volatile contents preclude direct correlation. Orbital determinations of global olivine distribution and compositions by thermal emission spectroscopy suggest that olivine-rich rocks may be widespread. Because weathering under acidic conditions preferentially attacks olivine and disguises such rocks beneath alteration rinds, picritic basalts formed from primitive magmas may even be a common component of the Martian crust formed during ancient and recent times.

Journal of Geophysical Research E: Planets↗