SEARCH · USGS Science

Results for “Ore and Energy Resource Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,664 records · Page 75Linked to original sources

USGS2024

Hypothetical CO2 leakage into, and hydrological plume management within, an underground source of drinking water at a proposed CO2 storage facility, Kemper County, Mississippi, USA

A large Geologic Carbon Sequestration (GCS) hub has been proposed in Kemper County, Mississippi. The target injection interval consists of numerous Cretaceous-aged deep saline aquifers overlain by a competent and extensive regional sealing layer. Above the seal, the deepest Underground Source of Drinking Water (USDW) at the site is the Eutaw aquifer of the Eutaw Group and McShan Formation, undifferentiated. To assess potential risks of leakage from the deep sequestration reservoir, a model of a portion of the Cretaceous Eutaw Group was constructed in this study. Simulations tested various permeabilities, hypothetical leakage rates, and plume mitigation strategies utilizing existing wells. Results suggest that, under the influence of regional groundwater flow fields, leaking CO 2 would effectively bypass the existing wells, and to influence this migration would require very large water extraction rates. Therefore, to ensure plume detection, monitoring for leakage at the injection wells themselves is very important.

Mississippi↗

USGS2025

Constraining large magnitude event source and path effects using ground motion simulations

The purpose of this study is to use ground motion simulations to investigate ways in which source and path effects for large magnitude events can be represented in non-ergodic GMMs. While we initially developed computation techniques using CyberShake simulations, the range of magnitudes and source-site combinations is not adequate to replicate what is observed empirically. We therefore designed a new ground motion simulation study, which includes earthquakes with a large range of magnitudes distributed uniformly on a fault plane, and sites covering a large range of rupture distances and azimuths. After running a large suite of simulations (M4-M7), we then develop a non-ergodic GMM with the simulation data. We find that the within-site residuals are dominated by the radiation pattern, rupture directivity, and slip patterns. Next, we modify an existing rupture directivity model to fit and remove the observed radiation pattern and rupture directivity from the residuals. We also minimize the contributions of slip patterns by averaging the within-site residuals among multiple source realizations. Finally, after removing the source effects from the within-site residuals, we compare the path effects computed with different magnitude groups using two approaches. The first approach only considers the small events that have the same shortest path to a site with the large events, while the second approach considers all small events on the fault plane. The results indicate that the path effects of large events cannot be satisfactorily approximated with that of small events using either approach.

Conference Paper↗

USGS2025

Induced earthquakes are generally not tidally triggered in Oklahoma and Kansas

Human-induced earthquakes occur along critically stressed faults as injected wastewater simultaneously heightens fluid pressure and pushes faults to failure. We investigate the possibility that small stresses imposed by Earth tides could trigger earthquakes in the induced seismicity region of Oklahoma and Kansas from 2011 to 2018. We decluster a catalog consisting of ∼110,000 earthquakes using three methods (Reasenberg, nearest-neighbor distance, and phase-bin). We find no significant tidal earthquake triggering using Schuster's p -value test for the declustered catalogs as a whole. We search for localized triggering using discretized space-time cells and find ∼0–6% of cells have significant tidal triggering which is close to what is randomly expected (5%) and indicates there is an insignificant amount of tidal triggering for the full study region. One area that has significant p -values across multiple time windows, ∼2014–2016 is ∼15 km from a region of large wastewater injection volume. It is possible that localized tidal triggering occurs for this time and area because faults remain critically stressed and are particularly susceptible to slip under the small stress load from the semidiurnal tide. Possible explanations for the lack of tidal triggering in our broader study are that the pre-seismic stressing rate in the earthquake nucleation area is faster than the tidal stressing rate (∼3 kPa/day), faults are not close enough to critically stressed to be affected by tidal forcing, and that nucleation occurs over longer periods than the tides considered in this study (∼1, ∼14 days). Fluid injection could be the source of a higher pre-seismic stress rate.

Kansas, Oklahoma↗

USGS2026

Flood-inundation maps for Río Grande De Loíza in and near Caguas, Puerto Rico, 2026

Digital flood-inundation maps for a 2.7-mile reach of Río Grande De Loíza in Caguas, Puerto Rico, were created by the U.S. Geological Survey. Water-surface profiles were computed for the stream reach by using a one-dimensional, steady-state, step-backwater model. The model was calibrated to the current (2025) stage-streamflow relation (rating curve) for the U.S. Geological Survey streamgage 50055000, Río Grande De Loíza, Puerto Rico. The resulting hydraulic model was then used to compute 16 water-surface profiles for water levels (flood stages) ranging from 19.00 to 34.00 feet at the streamgage; these flood stages range from “moderate flood stage” to above “major flood stage” as defined by the National Weather Service. The 34.00-foot stage exceeds the historical maximum peak stage of 33.20 feet, recorded at the streamgage in 1945. The simulated water-surface profiles were used in combination with a digital elevation model derived from light detection and ranging (lidar) data to map the inundated areas associated with each flood profile. The flood-inundation maps and the supporting hydraulic model produced by this study can be used by emergency managers and local officials to assess flood-mitigation strategies and to define flood-hazard areas to help protect life and property, to coordinate flood-response activities such as evacuations and road closures, and to aid post-flood recovery efforts.

Puerto Rico↗

USGS2026

The effect of temperature, flow, density and disease on smallmouth bass (Micropterus dolomieu) early life growth rate

Individual growth rates of fish are influenced by gradually changing environmental conditions and rapid-onset events. However, there is a paucity of information on drivers of spatiotemporal variability in growth rates of fishes across large spatial extents. Using a 36-year dataset of smallmouth bass ( Micropterus dolomieu ) length-at-age data across 10 river reaches in Pennsylvania, USA ( n = 54,068 individuals), we estimated annual early life growth rates (mm year −1 ) and assessed the effects of relative abundance, summer temperature, summer streamflow rate and a disease outbreak on growth rate. We found that temperature had a positive effect on growth rate, varied spatially, and had a stronger effect in diseased reaches. There was also evidence for an impact of disease on early life growth through density-dependent mechanisms, with growth rates increasing from ∼85 to 101 mm·year −1 following disease-related decreases in abundance. This study adds to our understanding of the factors that shape early life growth, including rapid-onset events like disease which can have immediate and lasting effects on growth rate trajectory.

Pennsylvania↗

USGS2025

Reply to, “Comment on ‘The 1886 Charleston, South Carolina, earthquake: Relic railroad offset reveals rupture,’ by Roger Bilham and Susan E. Hough”

We welcome this opportunity to respond to Pratt et al. (2024) (hereinafter P24). Bilham and Hough (2023) proposed a “first-cut” elastic deformation model for the 1886 earthquake, a quantitative source model constrained by identified coseismic constraints. A key observation was the measurement of a lateral offset of a railroad line south of Summerville, leading to a model with predominately dextral slip and minor convergence, from which we concluded that active faulting had raised the Penholoway Marine Terrace >6 m since ∼770 ka. P24 questioned these constraints and proposed an alternative rupture model with predominantly reverse slip. This alternative model is neither consistent with coseismic constraints nor with other geophysical data. In a revised model presented here, we recognize that uplift of the Penholoway Terrace is confined to the eastern edge of the terrace, which we conclude results from active folding and tectonic transpression centered on the dextral fault that offset the railroad in 1886.

South Carolina↗

USGS2024

Will there be water? Climate change, housing needs, and future water demand in California

Climate change in California is expected to alter future water availability, impacting water supplies needed to support future housing growth and agriculture demand. In groundwater-dependent regions like California's Central Coast, new land-use related water demand and decreasing recharge is already stressing depleted groundwater basins. We developed a spatially explicit state-and-transition simulation model that integrates climate, land-use change, water demand, and groundwater gain-loss to examine the impact of future climate and land use change on groundwater balance and water demand in five counties along the Central Coast from 2010 to 2060. The model incorporated downscaled groundwater recharge projections based on a Warm/Wet and a Hot/Dry climate future from a spatially explicit hydrological process-based model. Two urbanization projections from a parcel-based, regional urban growth model representing 1) recent historical and 2) state-mandated housing growth projections were used as alternative spatial targets for future urban growth. Agricultural projections were based on recent historical trends from remote sensing data. Annual projected changes in groundwater balance were calculated as the difference between land-use related water demand, based on historical estimates, and climate-driven recharge plus agriculture return flows. Results indicate that future changes in climate-driven groundwater recharge, coupled with cumulative increases in agricultural water demand, result in overall declines in future groundwater balance, with a Hot/Dry future resulting in cumulative groundwater decline in all but Santa Cruz County. Cumulative declines by 2060 are especially prominent in San Luis Obispo (−2.9 to −5.1 Bm 3 ) and Monterey counties (−6.5 to −8.7 Bm 3 ), despite limited changes in agricultural water demand over the model period. These two counties show declining groundwater reserves in a Warm/Wet future as well, while San Benito and Santa Barbara County barely reach equilibrium. These results suggest future groundwater supplies may not be able to keep pace with regional demand and declining climate-driven recharge, resulting in a potential reduction in water security in the region. However, our county-scale projections showed new housing and associated water demand does not conflict with California's groundwater sustainability goals. Rather, future climate coupled with increasing agricultural groundwater demand may reduce water security in some counties, potentially limiting available groundwater supplies for new housing.

California↗

USGS2025

Bathymetric and acoustic-backscatter mapping of Lake Sammamish, Washington, during USGS field activity 2021-656-FA

In 2021, scientists from the U.S. Geological Survey (USGS) acquired bathymetric and acoustic-backscatter data within Lake Sammamish, Washington. Mapping was completed to find evidence of past earthquakes such as underwater landslides and is part of a larger USGS project to understand the overall geologic hazards history of the Cascadia Margin region. The survey was conducted using the USGS research vessel Parke Snavely outfitted with an interferometric sidescan-sonar system for swath mapping. Three estimates of bathymetric uncertainty were calculated from the post-processed bathymetric data. This report provides a summary of the mapping mission.

Washington↗

USGS2025

Three-dimensional seismic velocity model for the Cascadia Subduction Zone with shallow soils and topography, version 1.7

The U.S. Geological Survey’s seismic velocity model for the Cascadia Subduction Zone provides P- and S-wave velocity ( V P and V S , respectively) information from 40.2° to 50.0° N. latitude and −129.0° to −121.0° W. longitude, and is used to support a variety of research topics, including three-dimensional (3D) earthquake simulations and seismic hazard assessment in the Pacific Northwest. This report describes an update to the previous version (v) 1.6 of the 3D seismic velocity model for the Cascadia Subduction Zone. This new model (herein referred to as v1.7) contains more detailed near-surface structure for improved earthquake ground motion modeling. Updated features include the addition of a new shallow soil velocity model in the top few hundred meters and the option of adding user-specified topography. Although v1.6 of the Cascadia seismic velocity model has a minimum V S of 600 meters per second (m/s), the new model (v1.7) has a minimum V S of approximately 40 m/s. Overall, this update will allow for more accurate ground motion estimates from 3D simulations of scenario earthquakes in the Cascadia Subduction Zone region.

British Columbia, California, Oregon, Washington↗

USGS2025

‘The fish that stop’: Drivers of historical decline for Pacific cod and implications for modern management in an era of rapidly changing climate

n the Gulf of Alaska, a series of marine heat waves depleted Pacific cod ( Gadus macrocephalus ) biomass to the lowest abundance ever recorded and led to the fishery’s closure in 2020. Although the fishery has been productive for decades, this collapse may have historical precedents. Traditional knowledge holders refer to cod as ‘the fish that stop’, and there is a suggested period of decline in the 1930s. Here we conduct a catch reconstruction of the early commercial fishery (1864–1950), confirming a rapid catch decline in the 1920s and 1930s. Next, we evaluate evidence for possible drivers. We document changes to demand and technology that contributed to declining catch. However, we also find both qualitative and quantitative evidence of depletion, suggesting catch declines were not driven entirely by social factors. Overfishing may have contributed to localized catch declines as evidenced by declining catch rates in heavily fished localities. We also find evidence for climate as a driver of regional decline, with the period of catch decline characterized by up to 2°C higher temperatures as compared to the earlier period of high fisheries production. Our analysis underscores the importance of understanding long-term drivers of fisheries productivity and the value of linking fisheries and climate histories.

Alaska↗

USGS2025

Assessing nonpoint-source uranium pollution in an irrigated stream-aquifer system

Uranium (U) in rocks and soils of arid and semi-arid environments can be mobilized by irrigation and fertilization, posing environmental and health risks. Elevated U, along with selenium (Se) and nitrate (NO 3 ) co-constituents, necessitates careful monitoring and management. We developed a distributed-parameter numerical model to assess U pollution in an irrigated stream-aquifer system, applying it to a 552 km 2 region in Colorado's Lower Arkansas River Valley (LARV) over 14 years. A MODFLOW model, describing groundwater and stream flow, was coupled with an RT3D-OTIS model to portray reactive U transport. Calibration using the PESTPP-iES iterative ensemble smoother (iES) software indicated good agreement with observed U concentrations. The model revealed substantial and variable U levels across the LARV, highlighting potential hotspots and possible contributing factors, such as geological composition of the bedrock and near-surface shale and aquifer sediments derived from them, irrigation practices, and riparian landscape. U levels exceed the chronic standard (85th percentile = 30 μg/L, set by the US Environmental Protection Agency), which is the permissible regulatory threshold, in groundwater across 44 % of the region and along the river by an average factor of 2.9. Simulated average U concentrations in the non-riparian aquifer and river are 124 μg/L and 60 μg/L, respectively, compared with 112 μg/L and 62 μg/L for measured values. The average 85th percentile U concentration is 222 μg/L in the aquifer and 82 μg/L in the river. Average simulated U mass loading to the river is 0.17 kg/day per km, compared to an estimated 0.23 kg/day per km. Findings provide a baseline for comparing future simulated outcomes of alternative best management practices (BMPs) for U pollution mitigation and offer a methodology applicable to other irrigated regions.

Colorado↗

USGS2025

Assessing flood water infiltration and storage in a restored floodplain

In urban areas, floodplain restoration is gaining prominence as a strategy for restoring the natural functions of floodplain ecosystems and reducing flood risk. This has spurred research into potential interactions between floodwaters, the hyporheic zone, and the floodplain aquifer. An urban restored stream in Wisconsin, USA, was used as a case study to examine four methods to estimate floodplain infiltration and storage during overbank floods. We characterised flood-related infiltration over a 4-year period from 2018 through 2021 by simultaneously and continuously measuring groundwater levels and vertical temperature profiles with stream water levels linked to high-resolution flood inundation maps. High-resolution topographic data helped to quantify surface floodplain storage and the unsaturated soil volume relative to flood stage. Infiltration estimates from the simple methods align well with those from the more complex methods; however, the complex methods provide additional insights about the factors influencing infiltration. Results from all methods indicate that the volume of water that vertically infiltrates during floods is likely small relative to the total volume of the flood, with 0.08%–0.52% of flood water infiltrating into the floodplain, on average. Spatially variable vertical hydraulic gradients, driven by flood depth, groundwater level, and permeability, imply heterogeneous patterns of infiltration across the floodplain. Gradients favourable for infiltration typically occurred during the onset of flooding but, over the study period, were mostly (98% of the time) favourable for groundwater discharge to the channel (non-flood periods). These findings highlight the importance of considering surface-groundwater dynamics, floodplain soils, and unsaturated floodplain volume in defining the benefits of floodplain infiltration for flood attenuation.

Wisconsin↗

USGS2025

Divide and conquer: Separating the two probabilities in seismic phase picking

There are two fundamental probabilities in the seismic phase picking process – the probability of the existence of a seismic phase (detection probability) and the probability of correctly identifying the phase arrival time (timing probability). The nearly ubiquitous approach in developing deep learning phase picking models is to use a kernel, such as a truncated Gaussian, to mask the labeled phase arrival time, and train a segmentation model. Once a model is trained, the times of the peaks in the output are taken as phase arrival times (picks) and the height of the peaks are taken as “probability” of the picks. Here, we show that this “probability” represents neither the detection nor the timing probabilty because this approach forces the output to follow the shape of the kernel. We introduce an approach using two models to estimate these two distinct probabilities. We use a binary classifier with a calibrated confidence to address the detection probability and a multi-class classifier to obtain a probability mass function to address the timing probability. This new approach makes the deep learning-based phase picking process more interpretable and gives us options to logically control seismic monitoring workflows.

Geophysical Journal International↗

USGS2026

Temporal and spatial changes in seismic attenuation associated with inferred fluid migration in the 2016 central Apennines earthquake sequence

Prior work suggests that high‐frequency seismic attenuation acts as a highly sensitive proxy for crustal permeability and fluid mobility in fractured media. We test the hypothesis that the fault system responsible for the 2016–2017 Amatrice–Visso–Norcia–Capitignano sequence acted as an impermeable seal, compartmentalizing pressurized fluids until dynamic rupture triggered widespread fluid diffusion. By tracking across the sequence the spatiotemporal evolution of the S ‐wave anelastic attenuation parameter, we identify large, positive low‐frequency attenuation anomalies emerging within the hanging wall following the Amatrice mainshock and strictly preceding subsequent large ruptures. Conversely, we observe weaker, negative anomalies in the footwall, anticorrelated in time with those of the hanging wall, revealing a massive asymmetry in fluid redistribution and permeability evolution across the fault system. Furthermore, aftershock migration rates reveal distinct linear alignments in a distance‐reduced time space, allowing us to explicitly track and quantify episodes of lateral and upward fluid migration. These physically consistent patterns suggest that stress‐driven fluid diffusion directly weakens adjacent fault patches, dictating the spatiotemporal migration of seismicity. We conclude that near‐real‐time monitoring of seismic attenuation may help detect fluid redistribution in active fault systems and may provide useful information for time‐dependent seismic hazard assessment.

central Apennines↗

USGS2026

Stress states on the eve of past earthquakes inform earthquake rupture through fault complexity along the San Andreas and San Jacinto faults

Estimating the evolving state of stress along active fault systems can provide insight into the conditions that generated past ground‐rupturing earthquakes and influenced their ability to propagate through areas of geometric complexity, such as fault branches and stepovers. We use quasi‐static forward numerical models that incorporate the 3D complex configuration of active faults in southern California to estimate shear tractions on the geometrically complex southern San Andreas and San Jacinto faults from 1000 to 1900 C.E. These tractions include interseismic accumulation of traction due to tectonic loading, viscoelastic relaxation of shear stress within the upper crust between earthquakes, and effects of other earthquakes on the fault network. We simulate ground‐rupturing earthquakes based on the along‐strike earthquake extents modeled by Scharer and Yule (2020) , assuming that stress drop is complete in each earthquake. We use Monte Carlo simulations to estimate uncertainty in evolving shear tractions due to uncertainties in earthquake timing and in upper‐crustal viscosity. Pre‐earthquake shear tractions typically do not exceed ∼2 MPa. Although ruptures with length <200 km have pre‐earthquake shear tractions that range from near zero to ∼1.75 MPa, these tractions are not less than ∼0.4 MPa for earthquakes with rupture length >200 km. Earthquakes with long (>200 km) ruptures occur only in the single‐stranded part of the system, whereas those with short (<125 km) rupture length and high pre‐earthquake shear traction occur near fault stepovers and branches. This suggests that high accumulated shear traction encourages longer rupture propagation, but may not be sufficient to overcome geometric complexities. This modeling approach informs our understanding of rupture propagation and provides estimates of fault shear tractions that are unavailable from direct measurements.

Callifornia↗

USGS2026

Ductile and brittle Rio Grande Rift deformation in Oligocene granite records a two-stage rift history in southern Colorado

The timing and nature of early deformation in the Rio Grande Rift remains poorly constrained. We present evidence for the earliest structural signature of rift extension in the Sangre de Cristo Range, southern Colorado, based on new geologic mapping, structural analysis, rock magnetic data, and thermochronology. These analyses focus on the ~30.0 Ma granite of Chokecherry Canyon, which hosts discrete low-angle mylonitic shear zones and a distributed, gently SW-dipping protomylonitic fabric. Incremental stretching axes, stretching lineations, and Kmax magnetic lineations plunge gently WSW. Quartz microstructures and crystallographic orientations indicate dominantly coaxial strain in the protomylonite and general shear in the discrete shear zones. Quartz c-axis opening-angle thermometry suggests deformation at ~420–540°C. Thermal modeling of ⁴⁰Ar/³⁹Ar K-feldspar data indicates rapid post magmatic cooling below the brittle–plastic transition, supporting shear-zone formation immediately after emplacement. Slow cooling from ~20–13 Ma was followed by renewed rapid cooling at ~13 Ma, interpreted as the onset of extensional exhumation along the Sangre de Cristo Fault System. These results show that extension in the northern Rio Grande Rift was active by ~30 Ma, earlier than previously recognized. We propose a two-stage model for northern Rio Grande Rift evolution: Stage I (30–23 Ma) records ENE–WSW extension localized in low-angle mylonitic shear zones associated with mid-crustal intrusions; Stage II (≤18 Ma) reflects brittle high-angle normal faulting, focused exhumation, and rift narrowing. Stage I magmatism and deformation along the western range front likely established crustal weaknesses that guided later fault development.

Colorado↗

USGS2025

Geochemical monitoring of volcanic fluids in the twenty-first century

This chapter reviews the state-of-the-art of geochemical volcano monitoring techniques. We cover in-situ monitoring technologies that rely on sampling fluids (direct sampling) and on instrumental analysis of the composition of such fluids in real-time (remote sensing of volcanic fluids is covered elsewhere in this book). We first review key concepts and principles in the field, and then review the results of some selected case studies and applications. We cover the large variety of fluid categories emitted by volcanoes, in both the near-(crater fumaroles and lakes, and plumes) and far-(degassing soils, groundwaters) fields. Our aim is to demonstrate the utility of measuring the chemistry of fluids released by volcanoes, and how these can help characterize volcano unrest, and eventually the increased likelihood of eruption. We conclude with a brief discussion of current challenges and knowledge gaps, and on future directions in geochemical monitoring.

Book chapter↗

USGS2024

Reduced injection rates and shallower depths mitigated induced seismicity in Oklahoma

The proximity of wastewater disposal to the Precambrian basement is a critical factor influencing induced earthquake rates in the Central United States, but the impact of reducing injection depths has not been widely demonstrated. Beginning in 2015, state regulatory efforts in Oklahoma and Kansas mandated that wells injecting into the lower Arbuckle Group, a basal sedimentary unit, be backfilled with cement (i.e. “plugged back”) so that they inject into shallower formations. This plug back activity gives us a unique opportunity to investigate the relationship between injection depth and induced seismicity rate. To evaluate the impact that decreased injection rates and plug backs had on the seismicity rates, we create a suite of rate-state earthquake models. Observed seismicity rates are best fit when only lower Arbuckle volumes are considered, suggesting the lower Arbuckle injectors were primarily responsible for the seismicity and that plug backs were effective at isolating the injected volumes to shallower formations. Our models demonstrate that if these wells had not been plugged back, seismicity rates would be multiple times larger than they are today. We find that the combination of well plug backs and injection volume decreases can be effective strategies for reducing induced seismicity rates.

Oklahoma↗