USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Waterway, Port, Coastal, and Ocean Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,722 records · Page 75Linked to original sources
USGS2026

Groundwater-level elevations in the bedrock aquifers of the Denver Basin aquifer system, Elbert County, Colorado, 2015–23

Water users in Elbert County, Colorado, rely on groundwater from bedrock aquifers in the Denver Basin aquifer system (upper Dawson, lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers) for approximately half of their water uses. Withdrawals from the bedrocks aquifers have increased to meet the water use needs of expanding regional population growth and development. The U.S. Geological Survey, in cooperation with the Elbert County Board of County Commissioners, began a study in 2015 to monitor groundwater levels within Elbert County. The primary purpose of this report is to present a summary of groundwater levels measured during the study period (2015–23) and present results from statistical analyses of changes in groundwater-level elevations through time. Discrete groundwater levels were measured at 36 wells within Elbert County. Seven of those wells contained equipment to make and record continuous groundwater-level measurements at hourly intervals. All aquifers, except the lower Dawson aquifer, had only declining groundwater-level elevations in discrete measurements for wells with statistically significant trends. Of the eight statistically significant trends in the lower Dawson aquifer, two wells indicated increasing groundwater-level elevation from discrete measurements. The groundwater-level elevation trend medians in the upper Dawson, lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers were −0.23, −0.66, −0.64, −0.39, and −0.63 feet per year, respectively, for discrete groundwater-level elevation measurements. Trends in continuous groundwater-level elevations were in agreement with statistically significant trends in discrete groundwater-level elevations for all wells. The groundwater-level elevation trend medians in this study, compared to the overall trends in a 2015−2018 study, both indicated declining groundwater-level elevations except in the upper Dawson aquifer, where the trend direction was opposite, a positive trend from 2015 to 2018 and a negative trend (declining groundwater elevations) from 2015 to 2023. The change in trends within the upper Dawson aquifer may be affected by differences in the study period and the trend analysis applied. Trends during the 2015–23 study period were compared to departures from the median 2015 groundwater-level elevation for each site in each aquifer. In general, the departures from the 2015 median supported trends observed at each site and correlated spatially with greater departures near the western border of Elbert County. Additionally, 30-year precipitation data showing wet and dry periods were overlaid with the departure from the 2015 median to assess groundwater-level patterns in wells in the five aquifers. Departures from the 2015 median groundwater-level elevations appeared greatest during the dry period between 2020 and 2023. Potentiometric-surface maps of the upper and lower Dawson aquifers created from static April 2023 groundwater elevations indicated groundwater-flow direction is generally from the south to the north. Results of this study could be used to guide additional groundwater monitoring in Elbert County and could aid in long-term planning of water resources.

Colorado↗
USGS2025

Forecast, monitor, adapt: A multi-agency strategy to protect people from postfire debris flows

In 2020, a wildfire burned across Glenwood Canyon in Colorado, USA. A history of postfire debris flows in the region and a hazard assessment for the burn area indicated that potentially life-threatening debris flows could be triggered by rainfall within months of a wildfire. As a result, four government agencies evaluated strategies to help mitigate hazards, including the loss of human life, that may be associated with debris-flow events. After the fire, 26 large debris flows occurred in the summer of 2021 and three sediment-laden flows occurred in the summer of 2023, but there were no major injuries or fatalities reported. We found that integrating hazard assessment/ forecasting, monitoring, and adaptation scenarios was a successful strategy for reducing postfire debris-flow risks to human life (including injuries and fatalities). Weather forecasts and estimates of debris-flow triggering rainfall thresholds, likelihood, and volume were used to anticipate the timing, location, and magnitude of debris-flow events. Rainfall monitoring and detailed recordkeeping of storms that triggered debris flows were used to validate and update debris-flow warning thresholds that varied with time following the wildfire. Although the governmental agencies working in this burn area had distinct and differing agency mandates, they were able to integrate information to reduce the risk of debris-flow events to human life.

Colorado↗
USGS2026

Final project peport for “Mapping riparian vegetation response to climate change on the San Carlos Apache Reservation and Upper Gila River watershed to inform restoration priorities: 1935 to present – Phase 2: Focus on tamarisk vegetation”

Riparian ecosystems play a critical role in supporting wildlife habitats, maintaining water quality, and sustaining ecological resilience in arid landscapes. In the Upper Gila River level-4 Hydrologic Unit Code (HUC-4; Identification Number – 1504) watershed of Arizona and New Mexico, and across areas of the San Carlos Apache Tribe of the San Carlos Apache Reservation (hereafter, Tribe/Tribal – entity; or Reservation - place), riparian ecosystems have been substantially altered by the widespread expansion of tamarisk ( Tamarix spp.), an invasive and non-native riparian species. Tamarisk has high water use and increased flammability, making it a growing concern as droughts intensify across the southwestern United States (U.S.). Recent research indicates that tamarisk is increasingly stressed under prolonged drought conditions, which can elevate wildfire risk and further degrade riparian habitat. In response, the U.S. Geological Survey (USGS) Western Geographic Science Center, in collaboration with the Tribe, developed remote sensing–based tools to map riparian vegetation composition and monitor vegetation condition over time. These tools enable accurate identification of tamarisk extent, detection of vegetation stress, and comparison with native species such as cottonwood and willow. This information directly supports restoration and management actions, including targeted tamarisk removal, protection of endangered species habitat, and prioritization of areas for native vegetation recovery. The tools also provide insight into how riparian vegetation responds to changing climate and hydrologic conditions, strengthening long-term planning for riparian forest management. Findings from this work demonstrate that riparian vegetation responses vary across river systems, indicating differences in plant composition and hydro-climatic conditions. Tamarisk on both the Gila and San Carlos Rivers generally exhibit greater declines in greenness in response to higher temperature as well as lower precipitation and river flow, while cottonwood ( Populus fremontii ) and willow (Salix spp.) are particularly sensitive to changes in discharge along the San Carlos River and respond more directly to both high and low flows, with more moderate responses to precipitation and temperature. By providing actionable, science-based information, this research supports climate adaptation planning, wildfire risk reduction, and improved riparian ecosystem health, with benefits that extend beyond the Reservation to regional water and wildlife conservation efforts.

Arizona, New Mexico↗
USGS2024

A methodology to estimate CO2 and energy gas storage resources in depleted conventional gas reservoirs

Depleted hydrocarbon reservoirs are subsurface geological structures capable of sequestering vast quantities of carbon dioxide (CO 2 ) as well as storing other energy gases for later usage, such as natural gas, and potentially hydrogen (H 2 ). Here we outline a methodology to quantify multi-gas storage resources in depleted conventional gas reservoirs for usage in assessments by the United States Geological Survey (USGS) at the scale of sedimentary basins. The methodology consists first of quantifying accessible pore volume in a depleted reservoir for natural gas storage using up to three equations. Input data are derived from commonly reported or estimated reservoir parameters and natural gas production volumes, and equations may be combined in linear models to improve pore volume estimates. Storage estimates from these equations are tested and validated for 31 reservoirs in the Michigan Basin Province, USA that were previously converted to underground gas storage facilities and have known (federally reported) natural gas storage capacities. Secondly, natural gas storage capacities can be transformed via fluid substitution calculations to estimate the storage resources for non-native fluids, applied here for, CO 2 , H 2 , and methane-H 2 blends, accounting for molecule-specific deviations from ideal gas behavior at reservoir pressures and temperatures as well as differing storage efficiencies. Importantly, the storage of non-native fluids may not be appropriate in all depleted gas reservoir settings due to potential risks like leakage, in particular in the case of H 2 storage, requiring additional knowledge of caprock sealing capacity. Given this caveat, we demonstrate the fluid substitution method for natural gas reservoirs of the Northern Niagaran Reef and Southern Niagaran Reef USGS plays in the Michigan Basin Province, as these trends of Silurian pinnacle reefs are capped with tight-sealing evaporite facies. The deterministic equations outlined from this methodology can be incorporated into future probabilistic USGS gas storage assessments for CO 2 , H 2 , and natural gas resources in the United States.

Michigan↗
USGS2025

3D Converted wave reverse time migration imaging

We describe a newly developed method for recovering high-resolution images of seismic discontinuities, such as subducting slabs, in 3D. Our method makes use of converted S → P or P → S waves observed by dense arrays of seismometers to infer the locations and relative strengths of seismic discontinuities at depth in a target region. Observed direct and converted waves are backpropagated to their times of origin. The time-reversed wavefield is then separated into its constituent P and S components via the Helmholtz decomposition, and those separated wavefields are used to compute imaging functions that characterize the locations and relative strengths of seismic discontinuities. Imaging functions may be designed to use either S → P or P → S waves, so that users can target those arrivals expected to be most dominant in a given dataset. We have previously demonstrated the efficacy of our method in two dimensions, and we now present a 3D implementation of our technique which addresses the significant computational challenges posed by the size of volumetric wavefield data in three dimensions. Through a series of synthetic examples, we demonstrate that our method is capable of recovering the fine scale structure of a subducting slab given realistic station coverage and earthquake sources. We investigate optimal seismic station geometries for our technique and explore image interpretability in regions with poor data coverage. We find that linear station geometries yield more optimal, interpretable imaging functions than collections of small arrays can. We also show that our method can successfully recover bothS → P or P → S images when realistic shear earthquake sources are used, and we explore the additional computational challenges presented by the high frequency content of S waves. Our results demonstrate the potential for our technique to recover high-resolution information about subducting slabs in real-world regions, given that relatively sparse seismic arrays with only approximately 100 stations are capable of recovering interpretable imaging functions from just a few realistic earthquake sources for multiple discontinuities at significant depth in an area of approximately 400~sq~km.

Seismica↗
USGS2025

Statewide cumulative human health risk assessment of inorganics-contaminated groundwater wells, Montana, USA

Across the United States, rural residents rely on unregulated and generally unmonitored private wells for drinking water, which may pose serious health risks due to unrecognized contaminants. We assessed the nature, degree, and spatial distribution of cumulative health risks from inorganic contaminants in groundwater. Our analysis included nearly 84,000 data points from 6500+ wells, across 51 of Montana's 98 watersheds, using a public groundwater database. We compared a drinking water screening level cumulative risk assessment (CRA) for inorganics based on the U.S. Environmental Protection Agency (EPA) protective health thresholds (Maximum Contaminant Level Goals, Health Advisories [MCLG-HAs]) to a CRA based on EPA public supply enforceable Maximum Contaminant Levels (MCLs). Based on median concentrations of 19 inorganics (antimony, arsenic, barium, beryllium, boron, cadmium, chromium, copper, fluoride, manganese, molybdenum, nickel, nitrate, lead, selenium, strontium, thallium, uranium, zinc), 75% of watersheds had MCLG-HA-based cumulative risk values > 1.0; arsenic and uranium contributed the most risk, followed by strontium, fluoride, manganese and boron. Hence, this screening level (Tier I) CRA indicated widespread potential for unrecognized human health risk to private well users from inorganic contaminants considering both carcinogenic and non-carcinogenic risks. Sensitivity analysis showed that benchmarks applied (MCLG-HAs versus MCLs) exerted the largest control on results. Our findings identify priority regions for Tier 2 risk assessments to elucidate local sources and distributions of geogenic versus anthropomorphic contaminants. Our study is the first statewide assessment of cumulative health risk from groundwater that we are aware of, and results support increased statewide drinking water education and testing to reduce human health risks from contaminated private well water.

Montana↗
USGS2025

Young explosive eruptions from the Clear Lake volcanic field

The Clear Lake volcanic field is the northernmost and youngest field in a chain of volcanic fields in and near the California Coast Range mountains. For 2 million years, numerous eruptions have happened around (and through) Clear Lake. The most recent period of activity in the Clear Lake volcanic field probably started around 40,000 years ago and was mainly explosive eruptions concentrated on and near faults in and around the lake. The combination of hot magma and groundwater created explosive releases of hot steam. The craters, called maars, threw out volcanic ash, pumice, and lava fragments, which fell back to the ground and draped the surrounding landscape. The deposits are visible in many places around the southeast end of the lake.

California↗
USGS2025

Light absorbing particles deposited to snow cover across the Upper Colorado River Basin, Colorado Rocky Mountains, 2013-16: Interannual variations from multiple natural and anthropogenic sources

Atmospheric particulate matter (PM) as light-absorbing particles (LAPs) deposited to snow cover can result in early onset and rapid snow melting, challenging management of downstream water resources. We identified LAPs in 38 snow samples (water years 2013–2016) from the mountainous Upper Colorado River basin by comparing among laboratory-measured spectral reflectance, chemical, physical, and magnetic properties. Dust sample reflectance, averaged over the wavelength range of 0.35–2.50 μm, varied by a factor of 1.9 (range, 0.2300–0.4444) and was suppressed mainly by three components: (a) carbonaceous matter measured as total organic carbon (1.6–22.5 wt. %) including inferred black carbon, natural organic matter, and carbon-based synthetic, black road-tire-wear particles, (b) dark rock and mineral particles, indicated by amounts of magnetite (0.11–0.37 wt. %) as their proxy, and (c) ferric oxide minerals identified by reflectance spectroscopy and magnetic properties. Fundamental compositional differences were associated with different iron oxide groups defined by dominant hematite, goethite, or magnetite. These differences in iron oxide mineralogy are attributed to temporally varying source-area contributions implying strong interannual changes in regional source behavior, dust-storm frequency, and (or) transport tracks. Observations of dust-storm activity in the western U.S. and particle-size averages for all samples (median, 25 μm) indicated that regional dust from deserts dominated mineral-dust masses. Fugitive contaminants, nevertheless, contributed important amounts of LAPs from many types of anthropogenic sources.

Colorado↗
USGS2024

Characterizing directivity in small (M 2.4-5) aftershocks of the Ridgecrest sequence

Directivity, or the focusing of energy along the direction of an earthquake rupture, is a common property of earthquakes of all sizes and can cause increased hazard due to azimuthally dependent ground‐motion amplification. For small earthquakes, the effects of directivity are generally less pronounced due to reduced rupture size, yet the directivity in small events can bias source property estimates and provide important insights into general regional faulting patterns. However, due to observational limitations, directivity is usually only measured and modeled for large events. As such, many studies of small earthquakes either ignore directivity altogether or assume a constant rupture direction for all events in a cluster. In our study, we apply a refined directivity fitting method constrained with two separate methods of source deconvolution to the dataset of aftershocks of the 2019 Ridgecrest earthquakes, which contain a large number of well‐recorded small‐to‐mid sized earthquakes occurring in close proximity to each other. The revealed directivity of 100+ small (M 2.4–5) earthquakes is highly heterogeneous and primarily oblique to and away from the main fault strike, suggesting a complex postseismic stress redistribution. In addition, the energy focusing effect of directivity appears to bias the selection of high‐quality data from stations in the direction of rupture, leading to average stress‐drop increases of 50% if directivity is not accounted for.

California↗
USGS2025

Mapping potential sensitivity to hydrogeomorphic change in the UMRS riverscape

In 2020 the U.S. Geological Survey (USGS), as part of the Upper Mississippi River Restoration (UMRR) Program, began a new project to characterize potential hydrogeomorphic change associated with hydrogeomorphic units (HGUs) and their catenae (units linked by their association with sediment sources and flow origins). The goal of the project was to develop a geographic information system (GIS) database of HGUs for the Upper Mississippi River System (UMRS) available to both scientists and river managers working on UMRR studies and HREP planning and design studies. The characterization was based on a hydrogeomorphic change hierarchical classification developed previously for the UMRS. The products were generated with automated techniques in a GIS using systemic datasets. Landforms were mapped from the 2015 UMRS topobathymetric dataset with geomorphon (shape-based) tools tailored for the large riverscape, valley bottom environments in the UMRS. A clustering analysis was applied to the resulting landforms to identify HGUs associated with zones of perennial low flows, bankfull flows, and overbank floodplains. Catenae were assembled based on the proximity of the units to the main channel, tributary mouths, and side channels from previously published aquatic areas (USACE, 2018) coupled with least-cost flowpath linkages between potential sediment origins and planform change units developed by Rogala, Fitzpatrick, and Henderson (2020). These GIS-based analyses were successful at identifying a range of HGUs using an automated technique with available data across the entire riverscape, with emphasis on those that have the potential for hydrogeomorphic change. Most of the resulting features are depositional, as expected in a large river system. However, this is the first attempt of linking tributary inputs, side channel erosion and levee breaches with their depositional counterparts. The approach was successfully piloted in Pools 8 and 10 in the Upper Impounded Reach and Pool 14 in the Lower Impounded Reach, with next steps for application in reaches of the unimpounded section and Illinois River. This report emphasizes results from Pool 10, which was the focus of most of our attention during the pilot phase.

Illinois, Indiana, Iowa, Minnesota, Missouri, Sout↗
USGS2026

New measurements indicate that natural geologic methane emissions from microseepage in the Michigan Basin are likely negligible

The magnitude of natural geologic methane (CH 4 ) emissions to the atmosphere (including emissions of fossil CH 4 from offshore and onshore gas and oil seeps, diffuse microseepage, mud volcanoes, volcanic vents, and geothermal areas) is highly uncertain. The largest component of geologic emissions is thought to be microseepage, which is the diffuse flux of CH 4 from soils across large areas of productive hydrocarbon basins. The accuracy of existing bottom-up estimates of microseepage is limited by low spatial coverage of published microseepage measurements. We present the first soil—atmosphere CH 4 flux measurements from Michigan Basin, USA. Results from 335 measurements taken during summer and winter seasons across a large portion of the basin suggest microseepage is nonexistent in the sampled region. Even areas with predictive features for microseepage (e.g., underlying mature, organically rich source rocks, proven gas accumulations, faults, and lineaments) yield null or negative fluxes, suggesting that CH 4 emissions from microseepage are negligible throughout our study region. A Monte Carlo method was used to place an upper limit on the regional-mean microseepage flux, in which synthetic patchy microseepage distributions were generated and tested against our observations to assess the impact of possible emission hot spots that were missed by our sampling strategy. Our analysis finds it is very unlikely that regional-mean emissions are as high as assumed in a previous global microseepage study. The observed lack of seepage may be explained by groundwater flow, active methanotrophy, glacial sediments, and bedded salt deposits, which could inhibit vertical gas migration and release to atmosphere.

Michigan↗
USGS2026

Groundwater dependency and hydroclimatic influences on riparian and upland vegetation productivity, Upper San Pedro, Arizona, United States

In arid and semi-arid regions, groundwater sustains vegetation through subsurface water access, yet the responses of groundwater-dependent ecosystems (GDEs) to changing hydroclimate and groundwater availability are relatively understudied. This study investigates seasonal and spatial patterns in vegetation greenness using Landsat Enhanced Vegetation Index (EVI) values across riparian and upland zones in the semi-arid Upper San Pedro (USP) watershed, southern Arizona, which experiences a bimodal precipitation regime. We paired 25 years (2000–2024) of EVI and depth to groundwater (DTG) data from 89 wells and climate metrics (precipitation and vapour pressure deficit) to quantify the sensitivity of vegetation to subsurface moisture as well as atmospheric moisture supply and demand. Vegetation at wells near the USP riparian area showed strong associations between EVI and DTG anomalies during the monsoon season, indicating sustained groundwater use even during this wet period when summer precipitation is abundant. In contrast, upland vegetation that lacked access to groundwater showed minimal sensitivity in EVI to DTG and was generally less responsive to vapour pressure deficit. Interestingly, the riparian GDEs were not decoupled from precipitation and climate variability. These results underscore the importance of groundwater for maintaining riparian productivity and highlight the utility of remote sensing in identifying vegetation-climate-groundwater linkages across heterogeneous dryland landscapes.

Arizona↗
USGS1990

Large springs in the Valley and Ridge Province in Tennessee

Approximately 2,700 miscellaneous discharge measurements for 171 large springs in 28 counties of East Tennessee, predominantly within the Valley and Ridge physiographic province, were analyzed statistically and results tabulated to summarize data useful to the Appalachian Valleys-Piedmont Regional Aquifer System Analysis study. The number of measurements at each spring ranged from 1 to 65. Information from each spring includes station numbers, latitude, longitude, spring name and where data are sufficient, an estimate of the mean discharge and the discharge exceeded by 75%, 50%, and 25% of the miscellaneous measurements. Data are referenced to locations on a 1:1,000 ,000-scale map. The highest mean spring discharge was 32.2 cu ft/sec (14,5000 gallons/min).

Tennessee↗
USGS2025

An empirical Green’s function approach for isolating directivity effects in earthquake ground-motion amplitudes

In this study, we apply an empirical Green’s function (eGf) method within a ground‐motion modeling framework to mitigate trade‐offs between source, path, and site effects. Many physical processes contribute to spatial variations in observed ground motions, including earthquake radiation pattern, directivity, variable path attenuation, and site effects. Current nonergodic ground‐motion models use spatially varying coefficients for path and site effects, but they do not address trade‐offs with complex earthquake source effects. To quantify the influence of directivity on ground‐motion amplitudes, we use records from multiple smaller earthquakes with epicenters near that of a larger event. We use these small magnitude events as eGfs and estimate repeatable path and site effects at individual stations, assuming that the average adjustments are not controlled by directivity. We adjust residuals from the larger earthquake using the eGf terms, isolating effects related to the rupture. This method clearly enhances the observed broadband directivity observed in the 2022 M 5.1 and 2007 M 5.4 Alum Rock earthquake ground motions, reinforcing the conclusion that their ruptures were unilateral. For the 2004 M 6.0 Parkfield earthquake, we find a bilateral rupture model better fits the data because variations in rupture velocity, slip rate, and slip distribution seem to have a stronger effect on the ground motions than rupture direction alone. Applying eGf adjustments reduces the standard deviation of the rupture models over the three earthquakes by 32% on average and by up to 57% for the 2022 Alum Rock earthquake, confirming we have effectively removed repeatable effects related to the wave propagation path and site response. We propose a novel measure of the frequency‐dependent directivity amplification strength as the reduction in ground‐motion residual variability gained by fitting a directivity model; for the three earthquakes considered, this parameter varies between 25% and 75%, indicating that directivity can strongly influence ground motions and should be considered in ground‐motion modeling.

California↗
USGS2025

Prospectivity mapping for geologic hydrogen

Geologic, or naturally occurring, hydrogen has the potential to become a new, low-carbon, primary energy resource. Often referred to as “white” or “gold” hydrogen, this gas occurs naturally in the Earth’s subsurface, similar to petroleum resources. However, unlike petroleum, which releases carbon dioxide when burned, burning hydrogen only produces water as a byproduct. Exploration for geologic hydrogen remains in an early stage and discoveries of high concentrations of subsurface hydrogen are still relatively rare. To facilitate research and exploration for this potential resource, this report presents the first publicly available prospectivity map of geologic hydrogen accumulations in the conterminous United States. Prospective regions are those regions in which all major components necessary for a hydrogen accumulation likely are present—a source of sufficient hydrogen generation, porous reservoirs for storage, and seals to prevent leakage. The midcontinent region of the United States and the central California coast are revealed as having high prospectivity. This analysis also identifies previously unrecognized prospective regions that may be favorable due to long distance lateral migration of subsurface hydrogen, such as the offshore eastern seaboard of the United States, and can provide a linkage between surface observations of hydrogen degassing and far-field source regions. The methodology developed to create this map is expandable and flexible and may be adapted to incorporate new concepts in the hydrogen system and for application to other regions of the world.

conterminous United States↗
USGS2025

Induced earthquakes are generally not tidally triggered in Oklahoma and Kansas

Human-induced earthquakes occur along critically stressed faults as injected wastewater simultaneously heightens fluid pressure and pushes faults to failure. We investigate the possibility that small stresses imposed by Earth tides could trigger earthquakes in the induced seismicity region of Oklahoma and Kansas from 2011 to 2018. We decluster a catalog consisting of ∼110,000 earthquakes using three methods (Reasenberg, nearest-neighbor distance, and phase-bin). We find no significant tidal earthquake triggering using Schuster's p -value test for the declustered catalogs as a whole. We search for localized triggering using discretized space-time cells and find ∼0–6% of cells have significant tidal triggering which is close to what is randomly expected (5%) and indicates there is an insignificant amount of tidal triggering for the full study region. One area that has significant p -values across multiple time windows, ∼2014–2016 is ∼15 km from a region of large wastewater injection volume. It is possible that localized tidal triggering occurs for this time and area because faults remain critically stressed and are particularly susceptible to slip under the small stress load from the semidiurnal tide. Possible explanations for the lack of tidal triggering in our broader study are that the pre-seismic stressing rate in the earthquake nucleation area is faster than the tidal stressing rate (∼3 kPa/day), faults are not close enough to critically stressed to be affected by tidal forcing, and that nucleation occurs over longer periods than the tides considered in this study (∼1, ∼14 days). Fluid injection could be the source of a higher pre-seismic stress rate.

Kansas, Oklahoma↗
USGS2025

Emerging investigator series: Post-wildfire sediment geochemical characterization reveals manganese reactivity and a potential link to water quality impairment in the Gallinas Creek watershed, New Mexico

Water quality post-wildfire is often impaired by increased turbidity and elevated concentrations of elements such as manganese (Mn) and iron (Fe). Precipitation events exacerbate these issues, due in part to increased erosion and transport of sediment from hillslopes to surface water. Both Mn and Fe are major redox-active elements in sediments that drive a variety of biogeochemical cycles, precipitate adsorptive phases, and can themselves be drinking water contaminants. By investigating Mn and Fe sediment geochemistry in post-wildfire sediment deposits, related water quality hazards can be assessed. To establish and strengthen this connection, we analyzed the geochemistry of sediment deposits and surface water in the Gallinas Creek watershed, New Mexico over 1.5 years post-wildfire. Analyses included particle size analysis, water extractions, sequential extractions and aqua regia extractions to determine metal partitioning in sediment deposits. Data demonstrate Mn concentrations were distributed across labile and reactive fractions, such as the exchangeable and oxyhydroxide fractions, while Fe concentrations were mainly associated with the residual fraction. Manganese concentrations in aqua regia extractions and several fractions of sequential extractions were also strongly and significantly correlated with fine-grained sediment while the same pools of Fe concentrations were not. Dissolved Mn concentrations in surface water were elevated (>50 μg L −1 ) multiple times over the 1.5 years post-wildfire, highlighting a relationship between sediment geochemistry and water quality. This work shows Mn in sediments mobilized post-wildfire has an influence on water quality and highlights how further investigation into Mn sediment redox processes and mineralogy post-wildfire can inform risk assessments and resource management.

New Mexico↗
USGS2026

Regional models for postfire debris-flow likelihood and rainfall thresholds across the western United States

The U.S. Geological Survey (USGS) uses an empirical model developed with logistic regression (the ‘M1’ model) to rapidly assess debris-flow likelihood and to identify quantitative rainfall thresholds for debris flows after wildfire in the western United States. The M1 model was calibrated to a debris-flow inventory from southern California (United States) and has been applied throughout the western United States. Limited spatial coverage in the calibration dataset has motivated evaluation of M1 model accuracy outside the calibration region (e.g., the Sierra Nevada or the eastern Cascade Range, United States). Previous test cases showed that M1 overpredicts debris-flow likelihood and underpredicts rainfall thresholds for some locations (e.g., Arizona, northern California, Colorado, New Mexico, United States). We sought to improve the regional applicability of a debris-flow likelihood model by expanding the debris-flow inventory used for calibration, testing multiple potential models and generating an updated model framework. The updated inventory includes 3788 observations from 67 burned areas paired with short duration rainfall ratios. The updated model framework consists of a modified model structure and sets of coefficients calibrated separately to the entire updated inventory and to subsets of the inventory that intersect three Environmental Protection Agency (EPA) Level 2 ecoregions (Mediterranean California, Upper Gila Mountains and Western Cordillera). Comparisons of predictions from the updated models with observed rainfall and debris-flow activity show that the updated models outperform the M1 model by ~15%–60% and improve the uniformity of predictive performance across the western United States. The updated models also reduce false positive rates relative to M1 and generate rainfall thresholds that are better aligned with relative differences in regional climatology and debris-flow activity.

Arizona, California, Colorado, Idaho, Montana, Nev↗