USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysics Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 75Linked to original sources
USGS2024

Insights on gas hydrate formation and growth within an interbedded sand reservoir from well logging at the Qiongdongnan Basin, South China Sea

Although variable well log resolution and its control on saturation estimation has been studied, it has not been directly applied to a specific location to explore the nature of gas hydrate within a sand reservoir. We applied in-situ measurements of resistivities, neutron porosity, and gamma ray at two sites in the Qiongdongnan Basin, South China Sea (QDN-W05–2021 and QDN-W08–2021) to investigate the reservoir parameters of a hydrate-bearing sand reservoir. Our results show that gas hydrate is distributed in 5 zones with a total thickness of 10.7 m and an average saturation of 69% at the QDN-W05–2021 site, while they are distributed in 2 zones with a total thickness of 4.3 m and an average saturation of 49% at the QDN-W08–2021 site. We found that variances in saturations estimated from lateral-extra deep button (RX), phase shift (P40H-P40L), and attenuation (A40H-A40L) resistivities within the laterally mapped continuous sand body were affected by the nature of gas hydrate occurrences. Results indicate gas hydrate forms and accumulates at the center of the sand layer and tends to be less or not present toward the top and base. Integrated with seismic data, the in-situ measurements provide insights in the evolution of a mushroom-shaped, hydrate-gas reservoir system. In the system, free gas is likely horizontally transported from the top-center of the gas chimney to the surrounding areas in the early stage dominated by a warm-gas environment, whereas hydrate forms in the opposite pathway starting from the surrounding areas in the following stage with temperature reducing. Our study suggests that high-resolution in-situ measurements not only are a tool to identify the physical properties, but also can be used to help explain the physical process of hydrate growth and accumulation.

Marine Geology↗
USGS2023

Hidden system identification: Basin modeling as a tool for examining sedimentary geothermal resource potential

Three-dimensional (3D) geologic and temperature models have been developed for the onshore U.S. Gulf Coast. The results from these models identify areas of moderate- to high-temperature (90°-150°C and >150°C; respectively) geothermal resources at depths <6 km. This modeling study addresses the fundamental challenge of predicting where opportune temperature and lithology coincide. Unlike traditional geothermal systems with surface expressions of hydrothermal circulation (e.g., hot springs, fumaroles, sinter), sedimentary geothermal systems (SGS) are generally hidden. Historically, simplified efforts to predict subsurface temperatures in sedimentary basins have focused on linear temperature extrapolation that does not consider the variable thermal properties of different lithologies or lithologic changes with depth (e.g., compaction, lithification). Therefore, the need to understand basin architecture and predict temperatures in 3D within SGS is paramount to identifying geothermal resources and determining economic feasibility. Basin modeling software has long been used to characterize the subsurface conditions of sedimentary basins, including temperature, in the pursuit of finding hydrocarbons. This tool can also be adapted to evaluate the potential of geothermal resources in a sedimentary basin by predicting the confluence of desirable temperatures and reservoir lithologies. In this work, PetroMod basin modeling software was used to create a regional geologic model of the onshore U.S. Gulf Coast, covering over 500,000 km 2 calibrated to temperature data from wells. Inputs include structural surfaces from commercial databases, lithology information derived from published literature, and corrected bottom-hole temperatures (BHT) from over 6,000 wells. The resulting 3D geologic model can be used to predict temperatures throughout the basin. Maps were exported showing the depth, depositional unit, and reservoir lithology at which temperatures of 90°C and 150°C were reached, revealing over 400,000 km 2 of moderate- to high-temperature resources at depths <6 km. These maps function as a first-order screening tool to identify areas where low-, moderate-, or high-grade resource potential may exist, based on temperature and if optimal reservoir lithologies or depositional units of interest are present. Depending on the success criteria of a project, the same maps can be exported for any isotherm or incorporate other 1407 Gardner and Birdwell subsurface properties. The methodology employed in this work can be applied in any sedimentary basin with available subsurface data. Further calibration incorporating other data, including pressure and porosity, can expand the utility of basin modeling for geothermal evaluations. Basin modeling is a powerful but underutilized tool for identifying prospective geothermal resources in sedimentary basins.

Conference Paper↗
USGS2025

An empirical Green’s function approach for isolating directivity effects in earthquake ground-motion amplitudes

In this study, we apply an empirical Green’s function (eGf) method within a ground‐motion modeling framework to mitigate trade‐offs between source, path, and site effects. Many physical processes contribute to spatial variations in observed ground motions, including earthquake radiation pattern, directivity, variable path attenuation, and site effects. Current nonergodic ground‐motion models use spatially varying coefficients for path and site effects, but they do not address trade‐offs with complex earthquake source effects. To quantify the influence of directivity on ground‐motion amplitudes, we use records from multiple smaller earthquakes with epicenters near that of a larger event. We use these small magnitude events as eGfs and estimate repeatable path and site effects at individual stations, assuming that the average adjustments are not controlled by directivity. We adjust residuals from the larger earthquake using the eGf terms, isolating effects related to the rupture. This method clearly enhances the observed broadband directivity observed in the 2022 M 5.1 and 2007 M 5.4 Alum Rock earthquake ground motions, reinforcing the conclusion that their ruptures were unilateral. For the 2004 M 6.0 Parkfield earthquake, we find a bilateral rupture model better fits the data because variations in rupture velocity, slip rate, and slip distribution seem to have a stronger effect on the ground motions than rupture direction alone. Applying eGf adjustments reduces the standard deviation of the rupture models over the three earthquakes by 32% on average and by up to 57% for the 2022 Alum Rock earthquake, confirming we have effectively removed repeatable effects related to the wave propagation path and site response. We propose a novel measure of the frequency‐dependent directivity amplification strength as the reduction in ground‐motion residual variability gained by fitting a directivity model; for the three earthquakes considered, this parameter varies between 25% and 75%, indicating that directivity can strongly influence ground motions and should be considered in ground‐motion modeling.

California↗
USGS2025

Remote single-station seismic monitoring of the July–October 2022 earthquake swarm at Tau volcano, American Samoa

From July to October 2022, a non-eruptive volcanic earthquake swarm occurred within ~15 km of Taʻū Island, located in eastern American Samoa. Felt reports from local residents were the only available information about the swarm when it started, as American Samoa lacked a seismic monitoring network. We developed a consistent single-station catalog for the entire swarm, using seismic data from the nearest station IU.AFI, ~250 km away. We applied the EQTransformer deep-learning model (Mousavi et al., 2020), automatically picking Pn and Sn arrivals on IU.AFI continuous data. We retained only events with Sn-Pn times of 22.5–25 seconds, consistent with the expected locations based on felt reports, then detected smaller swarm events with subsequent template-matching. This single-station catalog characterized the swarm’s onset and escalation to peak activity before a multi-agency field response team installed a local seismic network in mid-August 2022. This permanent seismic network captured the swarm’s decline. EQTransformer identified short S-P times on the first two locally deployed seismometers, both Raspberry Shake sensors, to constrain the swarm’s distance from Taʻū Island. Modern seismological processing methods, combined with basic observations such as felt reports, can quickly contribute useful information during an earthquake response in a poorly monitored region.

American Somoa↗
USGS1991

Wetland sedimentation and vegetation patterns near selected highway crossings in West Tennessee

Wetland sedimentation and vegetation patterns at 11 highway crossings in West Tennessee were studied from 1987 to 1989. The purpose of the study was to investigate potential adverse effects of highway crossings on wetlands. Sedimentation rates, determined from root-burial depths, were highly variable. Average rates offine-grained deposition ranged from 0.005 to 0.033 foot per year for stations in locally ponded areas and from -0.002 to 0.039 foot per year for stations in drained areas. Sedimentation rates upstream from highway crossings were not significantly different from downstream rates at 8 of the 11 study sites. Three study sites had significantly greater sedimentation rates downstream. Sand splays were observed downstream from bridges at most study sites. Vegetation patterns and tree growth appear most strongly related to hydropetiod, defined as the average length of time an area is covered by water each year. The influence of sedimentation on tree growth is difficult to separate from the influence of hydroperiod because areas with high sedimentation rates typically have long hydroperiods. Estimated hydroperiod increased no more than 1 percent because of backwater from the highway crossings at the 11 study sites, while the estimated average depth of flood-plain inundation increased by an average of 6 percent.

Tennessee↗
USGS2025

Groundwater budget for the surficial aquifer surrounding Lake Nokomis, Minneapolis, Minnesota

During prolonged periods of above-average precipitation, rising groundwater levels have the potential to cause damage to and interfere with underground infrastructure and building foundations. To understand the relations between precipitation and groundwater in the vicinity of Lake Nokomis, the U.S. Geological Survey, in collaboration with the University of Minnesota, quantified five components of the groundwater budget: groundwater recharge, change in surficial aquifer storage, surficial aquifer groundwater discharge to Lake Nokomis, groundwater evapotranspiration, and groundwater discharge to underlying bedrock aquifers. Field data, geologic records, and empirical calculation methods were used to quantify groundwater budget components for April 2023 through April 2024. Lake water budget data indicate that Lake Nokomis is a flowthrough system during periods with no outflow through the weir, with groundwater inputs equal to outputs. Roughly 40 percent of precipitation that fell in the study area was added to the surficial aquifer as recharge. Uncertainty in the vertical hydraulic conductivity resulted in wide-ranging estimates (spanning three orders of magnitude) of water discharging from the surficial aquifer to the underlying bedrock aquifer. Drought conditions persisted for the duration of this study and were not representative of the conditions that motivated this study. This study is a start towards understanding relations between precipitation, Lake Nokomis levels, and groundwater levels that could affect local underground infrastructure.

Minnesota↗
USGS2025

Multidecadal change in pesticide concentrations relative to human health benchmarks in the Nation’s groundwater

Groundwater-quality trend assessments identify aquifers that are responding to changes in pesticide use and the compounds that may pose a threat to water availability. The U.S. Geological Survey has been monitoring pesticide concentrations in groundwater for 25 principal aquifers across the conterminous United States since 1993. The groundwater well locations represent a range of soils, climate, and landforms. The wells are used to monitor groundwater underlying selected agricultural and urban settings and groundwater used for domestic supply. This study examined changes in relative concentrations, defined here as the percentage of wells with pesticide concentrations exceeding a human health benchmark (HHB). HHBs used in this report are legally enforceable drinking-water standards and nonenforceable drinking water levels. Relative pesticide concentration increases may lead to decreased water availability, as restrictions may be put in place for groundwater used as a drinking-water source. This study focused on concentration changes in 22 pesticides that were included in laboratory analysis from 1993 to 2023. The analysis and interpretation of these pesticide concentrations in groundwater have been separated into approximate decadal intervals (decade 1 (1993–2001), decade 2 (2002–12), and decade 3 (2013–22). For one pesticide, 1,2-dibromo-3-chloropropane (DBCP), concentration data were also collected in decade 4 (2023–onward). Atrazine, deethylatrazine, alachlor, prometon, and simazine were 5 pesticides detected at moderate concentrations (greater than 10 percent of the HHB but less than or equal to the HHB). The percentage of wells that had groundwater pesticide concentrations in the moderate concentration category decreased from 7 percent in decade 1 to 2 percent in decade 3. The agricultural networks had the highest percentages of wells with moderate concentrations, and these percentages decreased from 13 percent in decade 1 to 4 percent in decade 3. Moderate concentrations in the urban networks decreased between decades 1 and 2 from 4 percent to 0 percent. No moderate concentrations occurred in the urban networks in decade 3. The percentage of wells with moderate concentrations in the domestic supply networks (1 percent) was the lowest of all the network types and did not change across the three decades. Moderate atrazine or deethylatrazine concentrations occurred across all three decades in aggregated ecoregions representing similar soils, climate, and landforms in the Semiarid West, Midcontinent, and Northeastern United States. Moderate concentrations of prometon, alachlor, and simazine also occurred in the Midcontinent, Arid West, Northeast, South Atlantic Gulf, and Semiarid West regions, but the moderate concentrations did not persist across all three decades. DBCP was the only pesticide that exceeded its respective HHB, and the exceedances occurred across all four decades. In this report, the DBCP analysis was limited to one well network in the Central Valley, California. Agricultural use of DBCP was suspended in 1977. Forty-five years after being banned, DBCP concentrations were greater than the maximum contaminant level of 2 micrograms per liter (μg/L), but the number of exceedances decreased from 50 percent to 15 percent of the samples between 1993 and 2023. This assessment of decadal groundwater pesticide concentrations provides a characterization of changes in water availability because of pesticide contamination in areas where groundwater is used as a drinking-water source. The results highlight the importance of continued long-term monitoring and assessment of groundwater pesticides to identify locations and specific compounds that may pose a potential risk to human health.

continental United States↗
USGS2024

The 3D Elevation Program—Supporting New Hampshire’s economy

Introduction The topography of New Hampshire ranges from the Coastal Lowlands to the Eastern New England Upland to the White Mountains region. High-quality statewide elevation data are useful in managing this very diverse landscape. For example, the short coastline, including the Great Bay estuary and the Hampton-Seabrook marshes, is of disproportionately high value to New Hampshire’s tourist economy. The vulnerability of the coast to the effects of sea-level rise underscores the need for accurate, high-quality nearshore topographic elevation data and offshore bathymetric data to effectively manage the coast’s valuable resources, which include important fisheries, habitat, and infrastructure. Another important use for accurate elevation data in New Hampshire is in the evaluation of flood hazards and their potential environmental and infrastructure effects. This evaluation includes mapping of inundation and sediment transport, and assessing the associated costs of flooding. Addressing this challenge requires detailed knowledge of both surface topography and inland bathymetry. Other important activities having a substantial economic element and needing accurate elevation data include geologic resource assessment and hazard mitigation, urban and regional planning, infrastructure and construction management, and cultural resources preservation and management. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional model of the Earth’s surface and aboveground features.

New Hampshire↗
USGS2026

Seasonal migrations and other movements

In the past 25 years new information has been obtained on the migrations and movements of mountain sheep (bighorn [Ovis canadensis], thinhorn [Ovis dalli]). This chapter provides a comprehensive overview of mountain sheep migration and other movements across their broad distribution in western North America. Across the range of mountain sheep, migrations and other seasonal movements define a complex movement portfolio that relates to and supports all aspects of mountain sheep ecology. Bighorn and thinhorn species have examples of migratory behaviors that span the continuum between annual residents and long-distance migrants. Migratory behaviors can be characterized as low- or high-elevation residents; elevational migrations and other variants; and geographic migrants. Native populations that have been extant on the landscape without notable human intervention have greater migratory propensity and more diverse migratory portfolios due to the maintenance of migration through cultural learning and social transmission. Restored and augmented populations, where the population-level knowledge of migration has been lost or greatly reduced, are largely nonmigratory, although translocations show some ability to restore short-distance elevational migrations. Seasonal spring and fall migrations are less common in desert bighorn sheep (O. canadensis spp.) or bighorn sheep living in canyon or prairie breaks landscapes. Mineral lick visitation is important and common across the range of mountain sheep. Managing for migratory diversity can help to sustain migratory behavior in the face of climate change and other anthropogenic pressures, which can limit landscape connectivity between seasonal ranges or alter the spatiotemporal dynamics of regional phenology with cascading effects to other biotic and abiotic interactions such as the need to balance forage and predation risk or the spatial refugia with increased temperatures.

Book chapter↗
USGS2026

Tectonic controls on volcanism and associated hydrothermal activity in a sediment-dominated mid-ocean ridge; Escanaba Trough

Mid-ocean ridges, the Earth's most extensive volcanic system, exhibit unique characteristics in sediment-dominant environments. Thick sediment cover insulates the crust and channels fluid along pathways that can lead to the formation of distinct crustal alteration patterns, exceptionally large mineral deposits, and specialized chemosynthetic ecosystems. This study presents an interdisciplinary investigation into the tectonics of the Escanaba Trough, a heavily sedimented axial valley at the southern Gorda Ridge in the Northeast Pacific Ocean. A primary challenge in such environments is overcoming the masking effect of thick sediments on basement structures that control magmatic and hydrothermal activity. We address this by employing three-dimensional (3D) magnetic modeling of high-resolution near-seafloor magnetic data collected by an autonomous underwater vehicle (AUV). The 2022 surveys with AUV Sentry provided data for 3D magnetic susceptibility models, refining our understanding of the geometry of sub-sediment laccoliths/saucer-shaped sills and hydrothermal alteration. In conjunction with a new 1:100,000 scale lithostratigraphic map, we outline the tectonic controls on the emplacement of Escanaba Trough's three main volcanic centers, characterize the geometry of its spreading segments, and provide volumetric data on the distribution of sub-sediment volcanism in the southern Gorda Ridge.

Escanaba Trough, Pacific Ocean↗
USGS2025

From hydrated silica to quartz: Potential hydrothermal precipitates found in Jezero crater, Mars

On Earth, silica-rich phases from opal to quartz are important indicators and tracers of geological processes. Hydrated silica, such as opal, is a particularly good matrix for the preservation of molecular and macroscopic biosignatures. Cherts, a type of silica-dominated rocks, provide a unique archive of ancient terrestrial life while quartz is the emblematic mineral of the Earth's continental crust. On Mars, hydrated silica has been detected in several locations based on remote sensing and rover-based studies. In the present article we report on the detection of cobbles made of hydrated silica (opal or chalcedony), as well as well-crystallized quartz. These detections were made with the SuperCam instrument onboard Perseverance (Mars 2020 mission), using a combination of LIBS, infrared and Raman spectroscopy. Quartz-dominated stones are detected unambiguously for the first time on the Martian surface, and based on grain size and crystallinity are proposed to be of hydrothermal origin. Although these rocks were all found as float, we propose that these detections are part of a common hydrothermal system, and represent different depths / temperatures of precipitation. This attests that hydrothermal processes were active in and around Jezero crater, possibly triggered by the Jezero crater-forming impact. These silica-rich rocks, in particular opaline silica, are very promising targets for sampling and return to Earth given their high biosignature preservation potential.

Earth and Planetary Science Letters↗
USGS2025

Climate change and future water availability in the United States

The steady rise in global temperature as a result of human activity is causing changes in Earth’s water cycle. The balance of water stored within and moving between vapor, liquid, and frozen states in the water cycle is shifting, with consequences for water availability that include increases in drought, fire weather, flooding, and heavy precipitation, as well as cryosphere decline and sea-level rise. In this chapter of the U.S. Geological Survey Integrated Water Availability Assessment—2010–20, we provide an overview of climate-change observations and projections from Earth-system model simulations that relate to future water availability, from global and national climate assessments and from the published literature. Effects of climate change on primary water-cycle components are discussed in context of how global-scale hydroclimate drivers influence regional processes within the United States. Understanding the major climate drivers impacting the water cycle is crucial to predicting future changes in water availability and developing adaptation strategies to ensure human and ecosystem water supplies. First, we provide background information on the water cycle, the climate-model ensemble simulations developed to produce projections based on warming scenarios, and attribution and certainty levels. Tipping points, self-reinforcing feedbacks, cascading effects, and compound extremes are introduced. The framework of climatic impact drivers (CIDs) outlined in the Intergovernmental Panel on Climate Change Sixth Assessment Report (IPCC AR6) is used to show primary drivers of physical change to the water cycle and to understand and predict changes in future water availability. Specific climate-change related observations and projections are discussed for water cycle components of precipitation, evapotranspiration, soil moisture, streamflow, lakes and wetlands, ice and snow, and groundwater, as well as their implications for future water availability for humans and ecosystems. The chapter concludes with a synthesis discussion of three examples of complex regional-scale hydroclimate processes that influence water availability for populations in the United States, including (1) mountain and coastal precipitation, (2) aridification and drought, and (3) the influence of forest-cover change on terrestrial water-vapor recycling.

Professional Paper↗
USGS2025

Groundwater flowpath characteristics drive variability in per- and polyfluoroalkyl substances (PFAS) loading across a stream-wetland system

Groundwater-dependent ecosystems in areas with industrial land use are at risk of exposure to a PFAS chemicals. We investigated one such system with several known PFAS source areas, where high and low permeability sediments (glacial) coupled with groundwater-lake and groundwater/surface-water interactions created complex ‘source to seep’ dynamics. Using heat-tracing and chemical methods, numerous preferential groundwater discharge zones were identified and sampled across the upper Quashnet River stream-wetland system in Mashpee, MA, USA, downgradient of Joint Base Cape Cod (JBCC). Surface-water and groundwater samples were analyzed for 40 PFAS compounds between March and October 2022. Samples were collected from groundwater seeps identified as preferential discharge points (PDPs), wells upgradient of the stream-wetland system, contributing flow-through kettle lakes, and along Quashnet River surface-waters. PFAS from sampled waters contained perfluorinated carboxylates (PFPea, PFHxA, PFNA), perfluorinated sulfonates (PFBS, PFPeS, PFHxS, PFOS), fluorotelomer sulfonates (6:2, 8:2 FtS), and perfluoroalkyl sulfonamides (PFOSA). Samples from PDPs and wells had measured PFAS concentrations ranging from non-detect to 4677 ng/L ng/L (mean = 418 ng/L, std. = 709 ng/L), and a range of deuterium excess values (3.2 to 15.9 per mil) indicative of varying degrees of groundwater-lake interaction prior to groundwater flowpath emergence at PDPs. Correlations ( p < 0.01) between deuterium excess, %PFAS precursors, and terminal PFAS compounds highlighted potential precursor transformations associated with lake-groundwater exchange along flowpaths sourcing PDPs. However, some seepages had higher total PFAS concentrations (>1000 ng/L) than upgradient kettle lakes despite showing lake (evaporative) isotopic signatures, indicating the potential for groundwater flowpath convergence at wetland discharge zones and the influence of lakebed PFAS precursor reactions. Results from these synoptic surveys address gaps in the existing PFAS literature by demonstrating the importance of subsurface fate and transport on PFAS compound concentrations and mass loading in preferential groundwater discharge zones.

Massachusetts↗
USGS2025

Hydrogeology, water budget, and simulated groundwater availability in the Salt Fork Arkansas River and Chikaskia River alluvial aquifers, northern Oklahoma, 1980–2020

The 1973 Oklahoma Groundwater Law (Oklahoma Statute §82–1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations of the State’s aquifers to determine the maximum annual yield for each groundwater basin. The U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, conducted an updated hydrologic investigation of the Salt Fork Arkansas River and Chikaskia River alluvial aquifers in northern Oklahoma for the study period spanning 1980–2020 and evaluated the simulated effects of potential groundwater withdrawals on groundwater flow and availability in the Salt Fork Arkansas River alluvial aquifer. A hydrogeologic framework and conceptual model were developed to guide the development of a numerical model. Three groundwater-availability scenarios were evaluated by using the calibrated numerical model, which was focused on the Salt Fork Arkansas River alluvial aquifer. These scenarios were used to (1) estimate equal-proportionate-share groundwater withdrawal rates, (2) quantify the potential effects of projected well withdrawals on groundwater storage over a 50-year period, and (3) simulate the potential effects of a hypothetical 10-year drought. The 20-, 40-, and 50-year equal-proportionate-share groundwater withdrawal rates for the Salt Fork Arkansas River alluvial aquifer under normal recharge conditions were about 0.63, 0.58, and 0.57 acre-foot per acre per year, respectively. Projected 50-year groundwater withdrawal scenarios were used to simulate the effects of modified well withdrawal rates. Because well withdrawals were less than 2 percent of the calibrated numerical-model water budget, changes to the well groundwater withdrawal rates had little effect on simulated Salt Fork Arkansas River base flows and groundwater storage in the Salt Fork Arkansas River alluvial aquifer. A hypothetical 10-year drought scenario was used to simulate the potential effects of a prolonged period of reduced recharge on groundwater storage. Groundwater storage at the end of the hypothetical drought period was 14.5 percent less than the groundwater storage of the calibrated numerical model without the simulated drought.

Oklahoma↗
USGS2025

Enhanced geothermal systems electric-resource assessment for the Great Basin, southwestern United States

The U.S. Geological Survey recently (2025) completed a provisional assessment of the geothermal-electric resources associated with high-temperature, low-permeability rock formations of the Great Basin, Southwestern United States. If sufficient technological advances to commercialize enhanced geothermal systems occur, then a current best provisional estimate for electric-power generation capacity of 135 gigawatts electric are available from the upper 6 kilometers of the Earth’s crust. This estimate is a potential substantial increase of the installed geothermal electricity-generating capacity from <1 to 10 percent of current total U.S. power production capacity.

California, Idaho, Nevada, Oregon, Utah↗
USGS2025

Evaluating mass flow meter measurements from chambers for greenhouse gas emissions from orphan wells and other point sources

This study evaluates the performance of a rigid gas flux chamber equipped with a mass flow meter (MFM) for measuring gas emissions from leaking orphan wells and similar pressure-driven gas point sources. We conducted a series of laboratory and field experiments to evaluate the sensitivity, stability, and dynamic range of an MFM chamber system and found an optimal method for sealing the chamber to the ground to isolate the emission source. From these results, we estimate the effects of different soil gas permeabilities on measurements and identify the uncertainty of environmental processes that can impact measurements. Simulations of an MFM chamber are compared to those of a dynamic flux chamber to contrast the data derived with both methodologies and illustrate the potential for measuring high variability leaks with the MFM chamber. Using a low flow resistance MFM and a chamber well-sealed to the ground, it is possible to measure leaks down to 1.08 x 10 -3 cubic meters per hour (m 3 h −1 ) (refenced to 25°/1 atm), corresponding to 0.77 grams per hour (g h −1 ) methane or 2.11 g h −1 carbon dioxide, with a mean uncertainty of 0.89 % relative standard deviation. Environmental processes such as heated gas inside the chamber from solar gain, wind blowing across the chamber vent, and changing humidity in the chamber, can cause variation in MFM measurements. Over 11 d of continuous monitoring under varying weather conditions, the standard deviation of the environmentally sourced signals was found to be 7.40 x 10 -3 m 3 h −1 (equivalent to or 5.27 g h −1 methane or 14.45 g h −1 carbon dioxide). Strategies to obtain the highest quality data from MFM chambers include burying the edges of the chamber below the surface sufficiently deep to seal the chamber edges against gas flow and soaking the dirt with water to lower the chances of escaping gases, while monitoring the gas flow and adjusting the chamber seal to achieve a maximum flow rate.

Atmospheric Measurement Techniques↗
USGS2026

Mid-Cretaceous porphyritic magmatism in the Beartooth Mountains of the northern Laramide foreland and its connection to Frontier Formation sediment dispersal in Bighorn basin, Montana-Wyoming (USA), and Cordilleran tectonism

Porphyritic intrusions in the southeast Beartooth Mountains and porphyritic cobbles from the Torchlight conglomerate of the Cenomanian Frontier Formation in Bighorn basin (Montana-Wyoming, USA) bear striking resemblance. We utilize geologic mapping, petrography, geochemistry, and geochronology to characterize rocks from both locations and test whether the Beartooth Mountains area was the provenance for Bighorn basin cobbles. Mapping on Line Creek Plateau in the Beartooth Mountains shows three units with porphyritic phenocrysts consisting dominantly of plagioclase, plagioclase + potassium feldspar, and plagioclase + quartz. Petrography shows embayed quartz, opacitic rims, and zoned plagioclase. Geochemistry characterizes the intrusions as trachydacite to trachyte and trace elements exhibit enrichment in light rare earth elements and slight depletion in heavy rare earth elements relative to primitive mantle. Zircon U-Pb dating shows substantial Archean inheritance and ca. 104−92 Ma dates; some samples display multiple mid-Cretaceous date populations. Bighorn basin porphyritic cobbles exhibit similar modal mineralogy, near-identical geochemistry, and Archean inheritance and mid-Cretaceous geochronology. We suggest the porphyritic cobbles were sourced from basement-hosted porphyritic intrusions now exposed in the Beartooth Mountains, given that geochemistry does not agree with coeval volcanic sources along the Frontier Formation depositional fairway (Idaho batholith) or sedimentary-hosted Beartooth Mountains porphyritic sills intruded into Cambrian shale. Stratigraphic evidence does not support kilometer-scale mid-Cretaceous Beartooth Mountains exhumation to expose basement-hosted porphyritic intrusions, and we therefore present a volcanic hypothesis to bring rocks to the surface. This mid-Cretaceous multimillion-year magmatism is unexplained by tectonic models for the north-central Laramide foreland, and thus we further explore the emplacement processes, spatiotemporal significance, and tectonic implications of these rocks.

Montana, Wyoming↗
USGS2025

World minerals outlook—Cobalt, gallium, helium, lithium, magnesium, palladium, platinum, and titanium through 2029

Given the rapid expansion in the demand for mineral commodities that underpin worldwide economic growth and technological advancement, information regarding expected country-level mine production and production capacity is becoming increasingly important to industry stakeholders, end users, and policymakers. Production capacity can limit future supply, depending on how rapidly that capacity is able to expand. Current capacity can be evaluated on the basis of past production. Decreases to future capacity can be taken into account from announcements of planned shutdowns of mines or processing facilities, which are frequently publicized well in advance of such closures. Likewise, capacity expansions, which usually involve multiple stages—such as permitting, financing, and construction (all of which take time)—can also be estimated. As such, it is possible to evaluate midterm future capacity based on estimates of today’s capacities along with consideration of future investment plans. This World Minerals Outlook provides estimated capacities for cobalt, gallium, helium, lithium, magnesium, palladium, platinum, and titanium for 2025 through 2029. The results of this analysis indicate that two mineral commodities important to the manufacture of lithium-ion batteries—cobalt and lithium—are expected to have large capacity growth in the next few years, likely owing to expectations for increased demand for these batteries. For gallium, helium, palladium, and platinum, capacity is expected to remain stable or exhibit moderate growth. Still, these expected capacity levels are higher than current production, allowing for future production growth. The production capacity outlook is opaque for magnesium and titanium metal, which have a significant fraction of current production in nonmarket economies, such as China and Russia. Ultimately, though, where free market conditions prevail, full utilization of capacity potential for those commodities is likely to depend on supply deficits and prices that are above production costs.

Scientific Investigations Report↗