USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geochronology, Thermochronology and Time Scale Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,663 records · Page 75Linked to original sources
USGS2026

Shallow hydrogeologic framework of the Tully Valley mudboil area, Onondaga County, New York

Mudboils have been documented in the Tully Valley in southern Onondaga County, New York, since the late 1890s. Sediment-laden water from the mudboils flows into Onondaga Creek, which empties into Onondaga Lake at Syracuse 15 miles to the north. Turbidity from the mudboils has degraded the water quality of Onondaga Creek despite a series of mitigation efforts that began in the early 1990s. Turbidity mitigation actions presently (2025) being considered include creek relocation and offline sediment settling. In support of these proposed actions during 2021–23, the U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, U.S. Environmental Protection Agency, Onondaga Nation, Onondaga Environmental Institute, and Central New York Regional Planning and Development Board, collected and analyzed geologic, hydrologic, geophysical, and geotechnical data to characterize the shallow hydrogeology along four proposed creek-relocation paths and in the proposed offline settling basin area. The investigation indicated that the four proposed creek-relocation paths, two east of Onondaga Creek and two west of Onondaga Creek, are underlain by sediments including muck, alluvium, mudboil deposits, alluvial-fan sand and gravel, and lacustrine fines. The proposed excavations would penetrate partially to fully saturated conditions: generally, the water table is shallow near the creek and deep on the alluvial fans. The shallowest excavation, about 5 feet below land surface, would be near the creek and primarily in alluvium, and the deepest excavation, as much as 30 feet below land surface, would be in the alluvial-fan deposits. Brackish waters would be penetrated by proposed channel excavations on the eastern side of Onondaga Creek in an area downgradient from a potentially leaking historical salt-exploration borehole and near the main mudboil area. Excavation in these areas likely would provide a continuous source of brackish groundwater to the relocated creek. Proposed channel excavations of muck, soft to very soft lacustrine fines, and mudboil-type sediments in mudboil and suspected mudboil areas would pose an excavation and slope stability challenge and would have the greatest potential to create new mudboils. Proposed channel excavations below the water table on the Rattlesnake Gulf and Rainbow Creek alluvial fans would intercept groundwater and make the constructed streambank susceptible to seepage-induced slope instability. The substantial water-level fluctuation in the sediments of both alluvial fans would aggravate the stability condition. In addition, excavation on the Rattlesnake Gulf alluvial fan would have the potential to affect water-supply springs at the toe of the fan. The proposed offline settling basin area is in the northern part of the Rattlesnake Gulf alluvial fan. Natural and man-made diversions of Rattlesnake Gulf have resulted in saturated conditions in the general area of the proposed basin. The proposed offline settling basin would be excavated in, and berms would be constructed on, alluvial-fan deposits and lacustrine fines. In the proposed basin area, the alluvial deposits overlying the lacustrine fines are less than 10 feet thick. Excavation, berm construction, and loading of the saturated, soft to very soft lacustrine fines may be problematic and require soil strengthening.

New York↗
USGS2025

Review: The hydrogeology of critical mineral resources relevant to the energy transition

Attaining the goals of the international treaty on climate change (the Paris Agreement) will greatly increase the demand for the critical minerals required to implement clean-energy technologies. This poses both challenges and opportunities to the hydrogeologic community from several perspectives. Here, important insights that the hydrogeological sciences have to offer for mineral exploration, mineral production, and addressing environmental issues related to mining and mine decommissioning are summarized. This study focuses on copper, cobalt, lithium, and rare earths to represent the broad spectrum of critical minerals and illustrate their relevance by referring to projected demands and production rates. The current understanding of the hydrogeologic processes that form major deposits of these minerals are then summarized. Ore is defined as the naturally occurring material from which minerals of economic value can be extracted, where most ore deposits are the products of complex hydrogeologic couplings between fluid flow, heat transport, solute transport, chemical reactions, and mechanical deformation. Exploration models for the discovery of deeper, hidden deposits are potentially informed by hydrogeologic theory and hydrogeochemical processes. Hydrogeologic understanding and methods are also essential to production and recovery. Longstanding challenges are mine dewatering and (conversely) mine water supply, as well as mineral-extraction practices such as spoil heap leaching and in situ mining. New challenges arise from element extraction from subsurface brines. Finally, the quantity of water use and potential environmental impacts of mining on water quality are at the core of ‘social license’: the approval and acceptance of society to mining activities.

Hydrogeology Journal↗
USGS1997

Application of acoustical methods for estimating water flow and constituent loads in Perdido Bay, Florida

Water flow and quality data were collected from December 1994 to September 1995 to evaluate variations in discharge, water quality, and chemical fluxes (loads) through Perdido Bay, Florida. Data were collected at a cross section parallel to the U.S. Highway 98 bridge. Discharges measured with an acoustic Doppler current profiler (ADCP) and computed from stage-area and velocity ratings varied roughly between + or - 10,000 cubic feet per second during a typical tidal cycle. Large reversals in flow direction occurred rapidly (less than 1 hour), and complete reversals (resulting in near peak net-upstream or downstream discharges) occurred within a few hours of slack water. Observations of simultaneous upstream and downstream flow (bidirectional flow) were quite common in the ADCP measurements, with opposing directions of flow occurring predominantly in vertical layers. Continuous (every 15 minutes) discharge data were computed for the period from August 18, 1995, to September 28, 1995, and filtered daily mean discharge values were computed for the period from August 19 to September 26, 1995. Data were not computed prior to August 18, 1995, either because of missing data or because the velocity rating was poorly defined (because of insufficient data) for the period prior to landfall of hurricane Erin (August 3, 1995). The results of the study indicate that acoustical techniques can yield useful estimates of continuous (instantaneous) discharge in Perdido Bay. Useful estimates of average daily net flow rates can also be obtained, but the accuracy of these estimates will be limited by small rating shifts that introduce bias into the instantaneous values that are used to compute the net flows. Instantaneous loads of total nitrogen ranged from -180 to 220 grams per second for the samples collected during the study, and instantaneous loads of total phosphorous ranged from -10 to 11 grams per second (negative loads indicate net upstream transport). The chloride concentrations from the water samples collected from Perdido Bay indicated a significant amount of mixing of saltwater and freshwater. Mixing effects could greatly reduce the accuracy of estimates of net loads of nutrients or other substances. The study results indicate that acoustical techniques can yield acceptable estimates of instantaneous loads in Perdido Bay. However, estimates of net loads should be interpreted with great caution and may have unacceptably large errors, especially when saltwater and freshwater concentrations differ greatly.

Florida↗
USGS2025

Synergy between geology and geophysics in graphite mineral resource assessment

Graphite is designated as a critical mineral by the U.S. Government due to its essential role in modern technology and its vulnerability to supply chain disruption. To evaluate domestic graphite resources, the U.S. Geological Survey (USGS) conducted two airborne electromagnetic (AEM) surveys as part of the Earth Mapping Resources Initiative (Earth MRI) over prospective areas in the southern Appalachians of Alabama and the Seward Peninsula of Alaska. These surveys aimed to refine areas of interest by revealing subsurface electrical resistivity patterns indicative of graphite-bearing rocks. The results of the AEM surveys were integrated with existing geological knowledge and supplemented by field observations to assess the likelihood of undiscovered resources in these regions. This multidisciplinary approach combined geophysical techniques with traditional geological methods, enhancing the understanding of graphite potential in areas that may have been previously overlooked. The findings from this initiative are expected to contribute significantly to the ongoing efforts to secure a reliable domestic supply of graphite, thereby reducing import reliance and supporting national interests in mineral resource management.

Conference Paper↗
USGS2025

Simulation of groundwater flow in Wake County, North Carolina, 2000 through 2070

In 2019, the U.S. Geological Survey and Wake County Environmental Services began a collaborative study to evaluate groundwater resources and long-term groundwater availability in the county’s fractured-rock groundwater system. Wake County, in central North Carolina, is experiencing rapid population growth, associated land development, and changing water use. Hydrogeologic data including groundwater levels, aquifer testing, borehole fracture flow measurements, water-quality samples, and groundwater age-dating tracers were collected, along with findings from previous investigations, to help inform a conceptual model of the flow system used to develop a modular three-dimensional finite-difference groundwater-flow model (MODFLOW) for simulating historical and future groundwater conditions from 2000 to 2070. Hydraulic conductivity and transmissivity ranges were estimated from 17 slug tests and 21 borehole-flow measurements. Groundwater-quality analytical results from 19 sampling sites indicate that oxidation-reduction (redox) conditions varied within the regolith and bedrock and that minimal evaporation occurred before recharge entered the groundwater system. Age dating revealed mixtures of older and younger water, ranging from the 1940s to the 1990s—indicating variable flow pathways of recharge within permeable bedrock fracture zones. To simplify the complex fractured-rock groundwater system, two layers representing the regolith and the fractured bedrock were used in the MODFLOW model. Model calibration included parameter estimation and provided a reasonable fit to observed groundwater levels and estimated stream base flows. The model forecast scenarios incorporated future climate-model data for two emissions scenarios with land cover change projections to simulate potential impacts to future groundwater levels, recharge, and base flows. Recharge and base flow projections were largely within historical ranges, with no apparent long-term trends, but did indicate a slight downward shift in median values—likely, in part, because of differences in spatial resolution of input climate datasets. Seasonal patterns were consistent with historical data, with projections of possible increases in future winter recharge. Model limitations are discussed, and additional monitoring and model refinement needs are highlighted to support decision making for local groundwater management.

North Carolina↗
USGS1977

Summary of results from electromagnetic and galvanic soundings on Kilauea Iki lava lake, Hawaii

The purpose of this report is to summarize various electrical sounding studies made on the Kilauea Iki lava lake and to present some of the preliminary interpretations that resulted from the measurements. The following discussion is not intended as a complete interpretation, but is intended to summarize the major points made in an invited oral presentation at the American Geophysical Union fall meeting held in San Francisco, Calif. on December 6, 1976. This paper was part of a group of papers dealing with various geophysical studies recently made on the Kilauea Iki lava lake. A general plan map of Kilauea Iki lava lake is shown in figure 1. Electromagnetic (EM) loop-loop soundings, D.C. resistivity soundings, and VLF apparent resistivity measurements were made on the lave lake surface. All of these surveys were made to determine the geoelectric structure of the lava lake and to determine parameters of the molten basaltic lens that exist in the partially solidified lava lake.

Hawaii↗
USGS2026

Scenarios to assess the future water availability in the Mississippi River Valley Alluvial Aquifer for the Cache River and Grand Prairie Regions of Arkansas

The U.S. Geological Survey, as part of the Arkansas Groundwater Initiative, developed forecast scenarios using previously calibrated MODFLOW 6 groundwater models that focused on the Cache and Grand Prairie Critical Groundwater Areas to assess the impact of future climate and water management strategies on the Mississippi River Valley alluvial aquifer. A Soil Water Balance model was used to forecast recharge and irrigation water use. The forecast scenario period was from January 1, 2019, through December 31, 2055, with monthly stress periods. Twenty scenarios were simulated and included seven alternate climate forecasts, five 13 general groundwater pumping reduction scenarios (round 1), and groundwater pumping reduction scenarios by crop type and for the Bayou Meto Water Management Project and Grand Prairie Area Demonstration Project (round 2). Declines in saturated thickness within the Cache Critical Groundwater Area were larger for 18 of the 20 scenarios as compared to outside of the Critical Groundwater Area. The largest average increase in saturated thickness inside the Critical Groundwater Area was 6.4 m which occurred for the round 1, 50 percent reduction scenario. Automatic reductions in groundwater pumping by MODFLOW 6 in the Cache simulation ranged from 0.02 to 13.1 percent of total groundwater pumping. For the Grand Prairie model domain, the average change in saturated thickness of the Mississippi River Valley alluvial aquifer inside the Critical Groundwater Area for the forecast period ranged between -6.6 to 1.7 m. The average saturated thickness of the Mississippi River Valley alluvial aquifer inside the Grand Prairie Critical Groundwater Area declined for 16 of the 20 scenarios. The average reduction in requested groundwater pumping for all scenarios inside the Grand Prairie Critical Groundwater Area was 25.1 percent, and the largest reduction was 46.5 percent.

ESS Open Archive↗
USGS2025

The 3D Elevation Program—Supporting the economy of Massachusetts

Introduction Massachusetts extends from the mountains of the Appalachian system in the west of the State to the sandy beaches and rocky shorelines of the Atlantic coast in the east. Inland topographic data support a wide range of important activities, including geologic mapping, transportation planning, forest and wildlife management, quantifying ecological services, water supply protection, commonwealth-wide infrastructure planning, local site planning, and flood-plain management. Nearshore bathymetry can be used to support coastal portions of the Commonwealth by addressing the combined threats of ocean warming, strong storm surge, and rising sea levels. The maintenance and (or) expansion of Massachusetts ports (for instance, Boston, New Bedford) and Cape Cod sediment management depends upon the accurate mapping of bathymetry and the frequent influx of sediment and redeposition. Critical applications that address the broad range of requirements depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Massachusetts. The status of available and in-progress 3DEP baseline lidar data in Massachusetts is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $1.23 million in new benefits annually to Massachusetts. The top 10 Massachusetts business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Massachusetts↗
USGS2025

Relationship between peak and cumulative ground motions from 49 Mw 3-6 earthquakes in the San Francisco Bay Area

We examine the relationship between peak ground velocity (PGV) and cumulative absolute displacement (CAD) for 49 M w 3 – 6 earthquakes in the San Francisco Bay Area (SFBA) and gain insight into the spatiotemporal partitioning of seismic energy in ground motion records with respect to source, path, and site effects. PGV and CAD are positively correlated, but there can be large deviations from the average trend. For example, ground motion records with either very long duration resonance or short pulse-like motions will have higher or lower CAD, respectively, but could have very similar PGV. We perform principal component analysis (PCA) on PGV-CAD for >7000 records in the SFBA with the goal of investigating what influences positive or negative anomalies in cumulative motions. PCA rotates the PGV-CAD datapoints into two principal components, where the one with the larger variance, which we call the “primary intensity” represents mostly the distance-dependence of ground motion amplitudes. The other principal component, which we call the “excess motion”, represents the deviation from cumulative motions that would be typical for a ground motion record with a given PGV. The excess motion will be positive in the case of records with long duration ringing and will be negative for short duration pulse-like ground motions. We find that excess motion is generally positive at sites in sedimentary basins and in soft sediments around the SF Bay. Excess motion is generally negative in the very near field, as well as at sites on hard bedrock. We discuss the findings here in terms of implications for seismic hazard applications and other wave propagation phenomena.

California↗
USGS2023

Eruptive history within the vicinity of Al Madīnah in northern Harrat Rahat, Kingdom of Saudi Arabia

The northernmost part of the Harrat Rahat volcanic field contains early Pleistocene to Holocene mafic eruptive products within the vicinity of the city of Al Madīnah, Kingdom of Saudi Arabia. A detailed geologic investigation into the eruptive history of a 570 square kilometer (km 2 ) area covering Al Madīnah and the surrounding area has yielded 33 mapped Quaternary volcanic units consisting of lava flows, scoria cones, and shield volcanoes. These eruptive products consist of continental, intraplate alkalic and minor transitional basalts, hawaiites, and a single mugearite that were emplaced from at least 1,014±14 thousand years ago (ka) to a single Holocene eruption in 1256 C.E. Lava flows are generally 10 to 15 kilometers (km) long (but can reach 23 km long), 1 to 3 km wide, and at least 10 meters thick. Most of the mapped units erupted episodically between 400 and 340 ka and 180 and 100 ka. Despite small individual volumes (less than 1 cubic kilometers dense rock equivalent), each unit represents eruption of a distinct magma batch that was strongly influenced by clinopyroxene, olivine, and plagioclase fractionation. Some of these units are interpreted to have undergone magma mixing pre- and (or) syneruptively. Integrating eruption ages, geochemistry, and paleomagnetic data yields evidence that some eruptions were temporally and (or) spatially clustered. Aligned scoria cones and elongate vent edifices were constructed atop fissure vent systems that reflect the local stress field, which controls dike ascent through the middle and upper crust.

Professional Paper↗
USGS2026

HyFlood: A surrogate-model-based framework for compound coastal flooding

Compound coastal flooding is a major threat to low-lying coastal regions and is expected to intensify under future climate change projections. However, modeling the joint interaction of waves, storm surge, tides, and rainfall remains computationally demanding, limiting the development of fast and reliable forecast tools. Here we present HyFlood, a hybrid statistical-numerical downscaling framework capable of computing and mapping high-resolution compound flood hazards while substantially reducing the computational cost compared with fully process-based hydrodynamic modeling. HyFlood combines statistical sampling and selection algorithms with a cascade of reduced-complexity surrogate models that emulate nearshore wave transformation, surf-zone hydrodynamics, and coastal, fluvial, and pluvial flooding. The surrogate models employ machine-learning and regression algorithms applied to a low-dimensional representation of the flooding outputs, obtained through statistical dimensionality reduction. The framework is demonstrated in southern O'ahu, Hawai'i, a region exposed to elevated sea levels driven by tides, waves, and storm surge along with frequent precipitation-driven flash flooding. Validation of the surrogates against the physics-based model outputs demonstrates that HyFlood accurately reproduces daily maxima of spatially distributed flooding depths. This hybrid approach offers a scalable and efficient tool to better quantify how changes in flooding drivers translate into hazard and impact assessments, and to support compound-flood risk assessments and climate-change adaptation planning.

Hawaii↗
USGS2025

VIPER site analysis

We needed to evaluate available orbital data of NASA’s Volatiles Investigating Polar Exploration Rover (VIPER) mission area in order to derive a variety of maps to help the science team identify scientifically interesting places for the rover to visit and to provide scientific context for our mission. Some of these maps also fulfilled engineering and mission design needs to enable safe and efficient landing and roving. We incorporated data from the Lunar Reconnaissance Orbiter Camera, the Lunar Orbital Laser Altimeter, the Mini-RF instrument, the Chandrayaan-2 Orbital High Resolution Camera, the Korean Pathfinder Lunar Orbiter’s Shadowcam, the Kaguya Spectral Profiler and Multiband Imager, and the Chandrayaan-1 Moon Mineralogy Mapper. We used a variety of techniques to build these maps, including stereogrammetry, shape-from-shading, ice stability depth and surface temperature calculations, and the horizon method for solar illumination and direct-to-Earth communications maps. Altogether, these maps allowed us to survey for boulders, evaluate features in permanently shadowed regions that VIPER might explore, provide mineralogic context for what VIPER’s instruments may learn, estimate the ages and radar properties of craters in the VIPER mission area, and evaluate the potential for gravity traverses with the rover. These data and techniques provided a rich set of information from which both the VIPER science team and engineering teams were able to draw in order to plan a safe landing and to plan a VIPER surface mission that will be both scientifically valuable and robust from an operational perspective.

The Planetary Science Journal↗
USGS2026

Estimating paleotemperature using stable isotopes of soil-formed phyllosilicates from paleosols: A review

Fossilized soils, or paleosols, contain soil-formed phyllosilicates whose stable isotopic compositions may be used to calculate paleotemperature and thus reconstruct ancient terrestrial environments. Though paleosols are common in the geologic record, the use of phyllosilicates as paleotemperature proxies is limited in the literature owing to difficulties with selecting optimal paleosols, isolation from non-clay minerals and organic materials, mixtures of phyllosilicates in natural samples, wide variations of chemical compositions for phyllosilicates, and limited to undefined equilibrium fractionation factors between phyllosilicates-water. Here, we address these challenges by examining and comparing methods used for sample selection, mineral isolation, pretreatments, mineral identification, conventional and developing methods for oxygen and hydrogen isotopic analyses, and determination of phyllosilicate-water equilibrium fractionation factors, concluding with recommendations for best approaches for paleotemperature estimation. Additionally, we discuss how to identify and avoid detrital phyllosilicates, the impacts of diagenesis, comparison of stable isotope and non-isotope paleosol paleotemperature proxies, and challenges and opportunities for broadly using paleosols as paleoclimate archives. With ongoing efforts to refine this multi-faceted paleotemperature approach, the stable isotope geochemistry of soil-formed phyllosilicates continues to be an invaluable proxy system, enhancing our understanding of terrestrial paleoenvironments and paleoclimate.

Kansas↗
USGS2024

Methodology for inclusion of produced and stored carbon dioxide in the U.S. Geological Survey Federal lands greenhouse gas inventory

The U.S. Geological Survey (USGS) has developed two new carbon dioxide (CO2) emissions and sequestration accounting methods for use in future reports. The first method is a Federal lease-produced CO2 emissions calculation for an update of the report, “Federal Lands Greenhouse Gas Emissions and Sequestration in the United States.” The methodology to incorporate Federal lease CO2 production emissions into the updated report relies on CO2 sales royalty data from the Office of Natural Resources Revenue (ONRR). The end usage points for the gas include enhanced oil recovery with CO2 (CO2-EOR), food and beverage, and chemical production. CO2-EOR is the main end point for natural CO2 production in the United States; it accounted for 94% of usage in 2022 [1]. Federal lands emissions from this sector are estimated at 460 metric tons of CO2 in 2022, a very small amount relative to most other Federal lands emissions sector estimates. The second new method, planned for a separate report, is a calculation of the geologic storage of CO2 on Federal lands. The second method estimates the CO2 stored under Federal surface lands and documents Federal climate change mitigation efforts. Currently, there is no storage of CO2 at an industrial level on Federal lands, however multiple proposals and projects are planned. This method was developed on non-Federal lands datasets in an effort to prepare for when these activities on Federal lands will require accounting. National estimates for CO2 geologic storage using this method, but without a Federal lands filtering step, totaled 8.0 million metric tons (Mt) in 2022. The two methods described here are new benchmark methods in a collection of accounting procedures to document the current state of greenhouse gas emissions and their storage on Federal lands. These benchmarks can then be used to measure any subsequent changes in emissions from or carbon storage beneath Federal lands. While the magnitude of the values is currently non-existent to small, emissions mitigation goals established by decision makers indicate that these values will grow, and their documentation will take on greater value and use.

continental United States↗
USGS2025

The influence of nodule versus crust morphology on the composition of seamount-hosted ferromanganese minerals

Ferromanganese mineral precipitation in the global oceans is ubiquitous, occurring in the form of both crusts and nodules at a broad range of depths and seafloor terrains. Although ferromanganese crusts and nodules are both composed of ferromanganese minerals, mineralogy and mean element concentrations compiled for regional crust versus nodule occurrences differ. Notably, most published compilations compare nodules from abyssal plain sediments to crusts forming on seamounts, and do not address the question as to whether mineral morphology may affect the composition of crusts and nodules in addition to environmental factors. To address this, we have compiled a dataset of co-located hydrogenetic (seawater sourced) open-ocean ferromanganese crusts and seamount-hosted nodules. The preliminary data presented here support our hypothesis that co-located crusts and nodules exhibit similar compositions, both in terms of their mineralogy and mean element concentrations, as well as overall variance in concentrations for any given element. These data indicate that local processes influence sample-to-sample variation in both crusts and nodules, in contrast to broader ferromanganese variation reported between open-ocean seamounts- hosted crusts and abyssal plain-hosted nodules.

Conference Paper↗
USGS1999

Comparison of two approaches for determining ground-water discharge and pumpage in the lower Arkansas River Basin, Colorado, 1997-98

In March 1994, the Colorado Division of Water Resources (CDWR) adopted “Rules Governing the Measurement of Tributary Ground Water Diversions Located in the Arkansas River Basin” (Office of the State Engineer, 1994); these initial rules were amended in February 1996 (Office of the State Engineer, 1996). The amended rules require users of wells that divert tributary ground water to annually report the water pumped monthly by each well. The rules allow a well owner to report the pumpage measured by a totalizing flowmeter (TFM) or pumpage determined from electrical power data and a power conversion coefficient (PCC) (Hurr and Litke, 1989). Opinions by representatives of the State of Kansas, presented before the Special Master hearing a court case [State of Kansas v. State of Colorado, No. 105 Original (1996)] concerning post-Compact well pumping, stated that the PCC approach does not provide the same level of accuracy and reliability as a TFM when used to determine pumpage. In 1997, the U.S. Geological Survey (USGS), in cooperation with the CDWR, began a 2-year study to compare ground-water pumpage estimates made using the TFM and the PCC approaches. The study area was along the Arkansas River between Pueblo, Colorado, and the Colorado-Kansas State line (fig. 1). The two approaches for estimating ground-water discharge and pumpage were compared for more than 100 wells completed in the alluvial aquifer of the Arkansas River Basin. The TFM approach uses an inline flowmeter to directly measure instantaneous discharge and the total volume of water pumped at a well. The PCC approach uses electrical power consumption records and a power conversion coefficient to estimate the pumpage at ground-water wells. This executive summary describes the results of the comparison of the two approaches. Specifically, (1) the differences in instantaneous discharge measured with three portable flowmeters and measured with an inline TFM are evaluated, and the statistical differences in paired instantaneous discharge between the two approaches are determined; (2) short- and long-term variations in the PCC’s are presented; (3) differences in pumpage between the two approaches are evaluated, and the statistical differences in pumpage between the two approaches are determined; (4) potential sources of discrepancy between pumpage estimates are discussed; and (5) differences in total network pumpage using the two approaches are presented. During the irrigation seasons of 1997 and 1998, instantaneous discharge and electrical power demand were measured at randomly selected wells to determine PCC’s. At more than 100 wells, the PCC’s determined during the 1998 season were applied to total electrical power consumption data that was recorded between the initial and final readings at each network well site in 1998 to estimate total ground-water pumpage. At each site, an inline TFM was installed in a full-flowing, acceptable test section of pipe on the discharge side of the pump where the measurement of discharge was made. Measurements of instantaneous ground-water discharge also were made using three different types of portable flowmeters. The average velocity multiplied by the cross-sectional area of the discharge pipe was used to compute the discharge in gallons per minute. Whenever possible, discharge measurements were made at each network site using all three types of portable flowmeters.

Colorado↗
USGS2025

Chemical and isotopic fractionation during melt inclusion formation

Melt inclusions are used to study the origin and evolution of magmas. The extent to which they represent equilibrium melt compositions, however, critically hinges on the ratio of crystal growth rate to diffusion rate in melts. If the rate of crystal growth is limited by the supply of nutrients and the dissipation of unwanted components, the trapped melt will be depleted in compatible elements and enriched in incompatible elements. Despite widespread recognition of the potential for melt inclusions to trap disequilibrium compositions, their identification remains a challenge. Here, we demonstrate how stable isotopes provide a solution to this problem. Melt inclusions in basaltic tephra from Kīlauea volcano, Hawai‘i, display Mg isotope fractionation up to 0.49‰ ( 26 Mg/ 24 Mg) relative to bulk rock. These observations indicate that kinetic processes, such as chemical diffusion, are at play, as equilibrium mineral-melt isotope fractionation at high temperatures is an order of magnitude smaller. We propose that the heavy Mg isotopic compositions of the melt inclusions were generated by the faster diffusion and thus preferential incorporation of 24 Mg by the growing olivine, leaving the slower diffusant ( 26 Mg) behind. The incompatible elements (e.g., Ca, Ti, and K) are predicted to display similarly large fractionations when boundary layer effects are significant. These findings show that stable isotopes can be a useful tool in identifying disequilibrium compositions in melt inclusions.

Geology↗
USGS2025

Analysis of aquifer framework and properties, Alvahs Lane well field, Cutchogue, New York

The U.S. Geological Survey, in cooperation with the Suffolk County Water Authority, evaluated the aquifer transmissivity and storage properties at the Alvahs Lane well field north of the village of Cutchogue, New York. This analysis of aquifer properties provides the Suffolk County Water Authority with hydrogeologic information needed to develop water supplies to meet the increasing water demands of the residents of Suffolk County, New York. An aquifer test was conducted at the Alvahs Lane well field from October 18 through October 21, 2022, when a production well was pumped at 550 gallons per minute for about 24 hours, and groundwater-level drawdown and recovery were measured in two monitoring wells. The three wells are screened in a glaciofluvial aquifer under unconfined (water table) conditions. Drawdown and recovery data were analyzed with an analytical solution for partial penetration and delayed yield in an unconfined aquifer to provide estimates of the glaciofluvial aquifer properties. Inclusion of lateral aquifer boundaries was not necessary for the analysis to result in satisfactory matches with the observed water-level responses. Aquifer transmissivity was estimated at 32,000 feet squared per day. Assuming a saturated aquifer thickness of 120 feet, this result is equivalent to a horizontal hydraulic conductivity value of 270 feet per day. Specific yield was estimated at 0.15 (dimensionless). The estimated properties are consistent with those of a highly transmissive unconfined aquifer.

New York↗