USGS Science⌕ Search

SEARCH · USGS Science

Results for “Frontiers in Environmental Science.”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,607 records · Page 75Linked to original sources
USGS2026

Small earthquake moment magnitude and implications for frequency–magnitude scaling of injection induced earthquakes of the Raton Basin

Accurate estimation of earthquake source parameters—such as moment magnitudes, corner frequencies, and stress drops—is essential for improving seismic hazard assessments and understanding earthquake physics. In this study, moment magnitudes ( M W ) are calculated for 31,581 earthquakes associated with wastewater injection in the Raton Basin (located along the border between northern New Mexico and southern Colorado) between 2016 and 2024 using radiative transfer theory to fit coda decay envelopes. Our results show that it is feasible to estimate moment magnitudes down to M W ~1 with coda envelopes from a small local monitoring network. Significant differences were found between M W and local magnitudes ( M L ) for small earthquakes ( M < 3.0). A linear relationship was optimized to convert M L to M W : M W = 0.7 M L + 0.96 and M W = 0.73 M L + 0.99 (for the events reported by the U.S. Geological Survey), which can be applied in future studies of Raton Basin seismicity. We find that b -values calculated employing different methods and using M L are approximately 1.0, while those using M W range from 1.2 to 1.4. A larger estimate of the b -value could influence interpretations of the statistical behavior of earthquakes associated with injection and consequently seismic hazard assessments based on a magnitude–frequency distribution. The potential differences between local versus moment magnitude-based earthquake statistics should be considered in other seismically active regions.

Colorado, New Mexico↗
USGS2026

Investigating the influence of climate and volcanic surface aging on fluvial erosion: A case study of Réunion Island, Indian Ocean

Precipitation is one of the dominant drivers of landscape erosion and evolution; however, the effects of typical rainfall compared with less frequent, high-magnitude precipitation events on erosion remain unclear. Volcanic islands are ideal locations to study such phenomena due to their simple geometries, nontectonic construction, and strong spatiotemporal rainfall gradients. However, spatial variation in surface age, created during their construction, often complicates their degradation histories by introducing temporal changes in erosion rates as drainage networks develop. Réunion Island (western Indian Ocean) presents a clear example of this, with an east–west gradient in both surface age and mean annual precipitation, as well as infrequent cyclones that alter the background rainfall pattern. In this study, we analyze the effects of surface age, average rainfall, and rainfall variability on basin development and fluvial erosion across the island. We calculate basin-averaged values of basin morphology, age, precipitation, river discharge, eroded volumes, and erosion rates, and use these to analyze the dominant drivers of landscape evolution through a series of correlation analyses. Our results indicate a temporal dependence on the influence of precipitation, with young surfaces being dominantly eroded by high-rainfall events and older surfaces eroded by mean annual rainfall patterns. Furthermore, we show that drainage development of shield volcanoes follows similar trends to other volcano types, and suggest that surface permeability and groundwater structure are important controls on runoff-driven erosion on shield volcanoes. These results add new components to the question of how precipitation impacts erosion.

Réunion Island↗
USGS2025

Ungulate migrations of the Western United States, volume 5

Many ungulates migrate between distinct summer and winter ranges to take advantage of spatially and temporally variable food sources and avoid threats such as predators and deep snow. In 2018, the U.S. Department of the Interior established Secretarial Order 3362, which provided Federal support to expand existing research efforts to study ungulate populations and conserve their migrations by enhancing habitat quality for ungulates across the Western United States. In response to the order, the U.S. Geological Survey (USGS) created the Corridor Mapping Team, which is a collaboration among 11 State agencies, regional and Federal partners, and an expanding number of Tribal wildlife agencies. Together, the Corridor Mapping Team maps ungulate migrations throughout the Western United States and publishes them in the USGS “Ungulate Migrations of the Western United States” report series. This report details migrations and seasonal ranges from 36 additional herds and includes 2 herd updates detailed in previous reports. The Corridor Mapping Team has mapped the migrations and seasonal ranges of 218 unique herds for the report series, including this report. The report series serves as a map-based inventory of the ungulate migrations across the Western United States for biologists, managers, policymakers, and conservation practitioners. Building on the previous report volumes in the series, volume 5 additionally describes some of the local and national initiatives that are incorporating the products, tools, and information from this growing USGS report series.

Navajo Nation↗
USGS2026

Statewide surficial geologic map of Nebraska underscores Quaternary landscape evolution from the High Plains to the Central Lowland

Surficial geologic mapping in Nebraska has been conducted primarily at the 1:24,000 scale since the mid-1990s, although there have also been limited efforts to map generalized Quaternary and surficial geology within the state and the region. We compiled and evaluated disparate maps (1:24,000–1:1,000,000) and datasets—including geologic, soil and soil parent material, and geomorphic maps as well as LiDAR derivatives—to produce a single 1:500,000 scale surficial geologic map of Nebraska that is the first of its kind. This new map provides a coarse-scale surficial geologic map that will be incorporated into a nationwide U.S. Geological Survey Quaternary geologic map. It also reflects the variation and uniqueness of physical landscapes in the state, where the Great Plains and Central Lowland physiographic provinces meet, further developing a richer interdisciplinary understanding of regional geomorphology in the heart of North America.

Nebraska↗
USGS2026

Hydrothermal manganese-oxide mineralization of a carbonate ooze, Samoan hotspot region, South Pacific Ocean

Low-temperature hydrothermal manganese oxides occur throughout the global oceans. However, the hydrothermal replacement of a carbonate ooze by manganese oxides is described here for the first time. The 24 samples dredged from three locations around the Territory of American Samoa in the South Pacific Ocean include six samples with remnant carbonate and volcaniclastic sediments, which we refer to as “low Mn,” and 18 samples in which the mineralization is pervasive and has replaced most original sediment, termed “high Mn.” The 18 high-Mn samples exhibit a mean Mn content of 51 wt.%. Higher Li and Mn contents and lower Fe contents in the high-Mn samples indicate a hydrothermal origin and distinguish these samples from hydrogenetic ferromanganese crusts. Mn-oxide layers are up to 90 mm thick, some with columns to 44 mm long and 10 mm wide, the magnitude of which has not been described previously. Samples are composed of birnessite and 10 Å phyllomanganate minerals. Textures of the thickest Mn layers indicate mineralization below the seabed from ascending fluids during multiple hydrothermal pulses. Mineralization took place by complete to partial replacement and cementation of foraminiferal sediments intermixed with volcaniclastic sediments in varying amounts. Our results highlight the production of carbonate sediment-hosted hydrothermal Mn oxides from multiple hydrothermal sources within the Samoan volcanic chain. The potential extensive distribution on the regional scale of this newly described mineralization process and unique element enrichments raise questions about its broader distribution globally and potential importance to hydrothermal processes, element mass balance, and seabed mineral resources.

Geochemistry, Geophysics, Geosystems↗
USGS2024

Constraining mean landslide occurrence rates for non-temporal landslide inventories using high-resolution elevation data

Constraining landslide occurrence rates can help to generate landslide hazard models that predict the spatial and temporal occurrence of landslides. However, most landslide inventories do not include any temporal data due to the difficulties of dating landslide deposits. Here we introduce a method for estimating the mean landslide occurrence rate of deep-seated rotational and translational slides derived solely from high-resolution (≤3 m) elevation data and globally available estimates of the diffusion coefficient for sediment flux. The method applies a linear diffusion model to the roughest landslide deposits until they reach a representative non-landslide roughness distribution. This estimates the time for a landslide deposit to be unrecognizable in high-resolution digital elevation data, which we term the mean lifetime of the landslide. Using the mean lifetime and number of landslides within an area of interest, we can estimate the mean occurrence rate of landslides over that domain. We validate this approach using a comprehensive temporal inventory of landslides in western Oregon created using age-roughness curves that are calibrated with high-resolution elevation data and radiocarbon data. We find good agreement between our diffusion method and the existing age-roughness-derived estimates, producing mean lifetimes of 4500 and 5200 years (4% difference), respectively. Hazard maps produced using the two methodologies generally agree, with the maximum differences in landslide probability reaching 0.1. Due to the relative abundance of high-resolution elevation data compared with age-dated landslides, our method could help constrain landslide occurrence rates in areas previously considered unfeasible.

Oregon↗
USGS2025

Applying U-Th disequilbrium for dating siliceous sinters

Continental hydrothermal systems are critical avenues for the crustal transport of heat and mass captured for geothermal energy and mineral exploration. Thus, understanding their temporal evolution and longevity is important for resource characterization. Deposits of microlaminated siliceous sinter, common surface expressions of high temperature reservoirs (> 170 °C), have the potential to trace hydrothermal histories. Geothermal reservoirs are often located within uranium-bearing silicic volcanic rock where subsurface fluid-rock interactions extract U into hydrothermal fluids. U incorporated in the surface sinter deposit has the potential to provide a U— Th disequilibrium dating option. We focus on samples from El Tatio geyser field in the Altiplano of northern Chile, the largest geothermal system in the Andes. Our resulting 230 Th/U ages, along with the water and deposit elemental compositions, suggest concentrations of U and Th vary predictably along the sinter apron. While distal facies containing the highest U concentrations (> 50 μg/g) are least affected by detrital Th corrections, they can display suspected open-system behavior. In contrast, more medial facies, where bacterial mats and other porous textures are co mmonly concentrated, have only trace amounts of U (< 0.1 μg/g), which leads to unreliable or geologically improbable dates. Proximal facies tend to date most consistently. By comparing existing 14 C ages with 230 Th/U results, 230 Th/U ages tend to be younger than the 14 C ages, supporting the presence of a 14 C-dead carbon influence. New data confirm that the onset of geothermal activity at El Tatio goes back to the late Pleistocene.

Altiplano, El Tatio geyser field↗
USGS2025

Modeling byproduct and coproduct mine production and mineral substitution using multidimensional supply curves: Application to the Cu-Co-Ni system and beyond

Rapid demand growth is expected for many metals used in the energy transition. Many of these metals are byproducts of other commodities. Byproduct production’s price response is tied to host mineral economics, complicating its supply dynamics. Moreover, many of these metals are used in applications where the material properties desired are difficult to substitute; effectively, limiting how quickly demand can adapt to changes in commodity price. Previous work has demonstrated the interconnectivity of jointly produced mineral commodities from the supply side, where the copper–cobalt–nickel system was used and demand was assumed independent across commodities. Studies to understand byproduct-coproduct market interconnectivity on the demand side are limited, while studies on the interconnectivity of supply and demand simultaneously are even more so. We propose a modification to the multicommodity supply curve method to enable inter-commodity effects on demand simultaneous with supply. In batteries, high cobaltprices may push consumers to transition to high-nickel chemistries, causing the nickel demand surface to decrease with nickel price but increase with cobaltprice, creating a two-dimensional demand surface. Below cross-price elasticities of 0.05, inter-commodity effects were found to be negligible, potentially permitting exclusion of these effects for many commodities. This additional demand curve complexity introduces potential computation challenges alongside the capacity to model many interrelated commodity systems such as rare earth elements, ferroalloys, country-oriented subsidies or restrictions, and bifurcated sustainable metals markets. By presenting the work done on multicommodity supply surfaces to date and potential new directions, this work aims to catalyze the next round of innovative approaches to modeling jointly produced commodities.

Conference Paper↗
USGS2025

Fluid inclusion constraints on the geometry of the magmatic plumbing system beneath Mauna Loa – Part 2: Xenoliths

Mauna Loa volcano erupts crystal-poor material at its summit and more crystal-rich material on its rift zones. Some of the more olivine-rich lava flows contain xenoliths with diverse mineralogy, including cumulate harzburgites with high-Mg# orthopyroxenes and high-Fo olivines (both > 84). Previous experimental work and thermodynamic modelling has proposed that high-Mg# orthopyroxenes only crystallize from Mauna Loa melts at high pressures (> 6 kbar, > 20 km), leading to suggestions that there is a region of sub-Moho magma storage at Mauna Loa in addition to the geophysically imaged magma reservoir at 2–5 km depth below the summit. We use melt and fluid inclusion barometry combined with thermodynamic models to further investigate this suggestion. Fluid inclusion data from harzburgites and dunitic xenoliths yield storage depths remarkably similar to those found in non-xenolithic crystals from lavas and tephras, with a clear peak at ~ 2–3 km (below the summit). Depths from melt inclusions in these xenoliths overlap with fluid inclusion pressures, ruling out the possibility of fluid inclusion re-equilibration during a period of stalling in a shallower reservoir. We examine five different thermodynamic models and find that the minimum pressure of olivine-orthopyroxene co-saturation varies by ~ 4 kbar (~ 12 km). These models also fail to predict that orthopyroxene is stable in ~ 15–80% of compositionally relevant experimental charges which grew orthopyroxene. Overall, this shows that phase stability modelling is an unreliable method of determining magma storage depth at Mauna Loa. We suggest that model discrepancies reflect a lack of experimental constraints on orthopyroxene stability at > 1200 ℃ and 0.01–5 kbar. Based on the presence of large oikocrystic orthopyroxenes completely enclosing rounded olivine chadacrysts, we suggest that these harzburgitic xenoliths formed through the reaction of intruding melts with olivine mush piles within the Mauna Loa edifice at ~ 3 km depth below the summit, with no need for a deeper storage reservoir. The predominance of pre-eruptive shallow storage means that there is more chance of detecting reservoir destabilization with geophysical monitoring techniques compared to a scenario where melts are supplied from sub-Moho reservoirs.

Hawaii↗
USGS2026

Geologic map of the Emmons Lake volcanic center, Alaska

Introduction The Emmons Lake volcanic center is a spatially clustered group of stratovolcanoes and calderas in the southwestern part of the Alaska Peninsula, Alaska. The volcanic center is characterized by several ice- and snow-clad stratovolcanoes located within and along the margins of a nested-caldera complex that includes Emmons Lake. A shieldlike ancestral edifice (ancestral Mount Emmons) is truncated by the caldera complex and forms a broad volcanic platform around the center. The main stratovolcanoes of the Emmons Lake volcanic center are Pavlof Sister, Pavlof Volcano, Little Pavlof, Double Crater, Mount Hague, and Mount Emmons. Several small unnamed cinder cones and vents also are located within Emmons Lake volcanic center and on the east flank of Pavlof Volcano. Many of these cones and vents have been the source of the young lava flows that mantle the floor of the caldera. Pavlof Volcano, in the northeastern part of the Emmons Lake volcanic center, is one of the most historically (that is, the past about 300 years) active volcanoes in Alaska, and eruptions from Pavlof Volcano pose the greatest hazards to the region. Volcanic rocks of the Emmons Lake volcanic center overlie continental and marine sedimentary rocks of chiefly Late Jurassic to early Tertiary age. The oldest rocks in the area are those of the Naknek Formation, consisting of volcaniclastic sandstone, siltstone, and conglomerate of Late Jurassic age. The southern part of the area includes rocks of the Belkofski Formation, a thick sequence of volcaniclastic sandstone, siltstone, and conglomerate of middle Tertiary age. Lava flows, volcanic breccia, and fluvial volcaniclastic rocks of late Miocene age, which unconformably overlie the Belkofski Formation south of the Emmons Lake volcanic center, are primarily exposed on the islands just south of the Alaska Peninsula. The Emmons Lake volcanic center was affected multiple times by glaciation associated with the glacier expansion that characterized the Quaternary. Glaciation has played a key role in shaping the present-day landscape, and much of the eruptive history of the Emmons Lake volcanic center has involved interactions with glacier ice. Thus, a brief review of the Quaternary glacial history of the area is provided to establish the physical context for Emmons Lake volcanic center eruptive activity.

Alaska↗
USGS2025

AAPG Energy and Minerals Division Tight Oil and Gas Committee Activities and Commodity Report for 2021-2022: Tuscaloosa Marine Shale, Gulf Coast basin, Louisiana and Mississippi

The Upper Cretaceous Tuscaloosa marine shale (TMS) potential production area encompasses 20.4 million acres across central Louisiana (LA), southern Mississippi (MS), southwestern Alabama (AL), and a small southwestern section of the Florida panhandle (Hackley et al., 2018). It remains a minor and largely undeveloped unconventional shale oil play with production from the TMS confined along the east-west LA-MS State boundary (Fig. 1). The mean undiscovered, technically recoverable resources in the TMS are estimated at 1.5 billion barrels of oil and 4.6 trillion cubic feet of gas (Hackley et al., 2018). Geochemical analyses of source rock solvent extracts and oil samples indicate that, in the play area, the TMS is the primary source of shale oil produced from the TMS as well as of accumulated oils in the underlying conventional reservoirs of the lower Tuscaloosa (Hackley et al., 2020). The API gravity of TMS oils ranges from approximately 34 to 46 degrees (Hackley et al., 2020; Croke et al., 2020).

AAPG Wiki↗
USGS2025

Uppermost Oligocene and Miocene diatom biostratigraphy of Ocean Drilling Program Sites 682 and 688 from the Peru Margin

The diatom biochronology of ODP (Ocean Drilling Program) Holes 682A and 688E provides a detailed framework for refiningMiocene diatom zonation in the East Pisco Basin of southern Peru, establishing both a nearly complete offshore reference section and a correlation tool for the fragmentary onshore vertebrate-bearing deposits. This new biostratigraphic record documents a complete succession of low latitude and/or northeastern Pacific Miocene diatom zones, with two notable exceptions: a dissolution and/or hiatus interval (*16.5–14 Ma) during the Middle Miocene Climatic Optimum and a likely earliest Miocene hiatus (*23.4–21.8 Ma). Although eastern equatorial Pacific diatom zones characterize the Upper Oligocene and Lower Miocene strata, an increased abundance of cool-water diatoms that lived during the Middle and Late Miocene allows better application of northeast Pacific diatom zones, except during the Messinian (7–6 Ma) when warm-water diatoms predominate. The effects of eustatic sea level and tectonics on depositional sequences in the EPB and in offshore cores off central Peru are discussed.

Stratigraphy↗
USGS2025

Gulf Coast Basin CORE-CM initiative final report

The Bureau of Economic Geology at the University of Texas at Austin (UT-BEG) is leading the Gulf Coast Carbon Ore, Rare Earth, and Critical Minerals (CORE-CM) Initiative to assess the potential to produce critical minerals (CMs), including rare earth elements (REEs) from coal, coal ash, and produced water related to oil and gas production, and related materials (alumina processing waste [red mud], heavy mineral sands, graphite, and zeolite) within the Gulf Coast Basin. This project represents the first phase in a long-term program and provides reconnaissance data that will be foundational for future work by assessing resources and suggesting plans to be conducted in future work and expanding stakeholder engagement. The project includes several tasks designed to identify, characterize, and assess several necessary aspects for development of CMs and REEs in the Gulf Coast Basin.

Gulf Coast basin↗
USGS2026

Controls on natural hydrogen generation during serpentinization of mantle rocks

Mantle rocks undergoing serpentinization can generate significant amounts of natural hydrogen, yet the rates and controlling processes remain poorly understood. Here, we constrain the possible hydrogen generation rates in two distinct mantle rock types, the fertile lherzolites of the Western Pyrenees and the depleted harzburgites of Northern California, to relatively low rates of ~0.1 to ~0.5 tonnes H₂ yr⁻¹ km⁻³ of reactive rock. When integrated over the full reactive volumes, this corresponds to total production rates of ~300 to ~600 tonnes H₂ yr⁻¹. By combining three-dimensional geophysical inversion with numerical modelling of fluid-rock processes, we show that hydrogen generation rates are mainly limited by H₂ saturation in the fluid and reaction kinetics. Under these constraints, hydrogen generation in mantle-derived serpentinization systems proceeds slowly, making rapid large-scale replenishment unlikely and suggesting that large, economically relevant accumulations, would require timescales of thousands to tens of thousands of years to develop.

northern California, western Pyrenees↗
USGS2025

Beyond optimality: Dryland ecosystems infrequently use water efficiently for carbon gain

Optimality theory assumes plants maximize carbon gain per unit water lost and is often implemented to scale leaf-level carbon gain and water use to regional and global scales. Optimality theory is often mathematically represented by assuming plant water-use efficiency (WUE) scales with VPD k , where k = ½ represents expected optimal behavior. It is unclear, however, if this relationship holds in arid and semi-arid ecosystems that are strongly impacted by soil and atmospheric moisture status. We used data from seven flux tower sites along an aridity gradient in New Mexico to answer: how does the relationship between WUE and VPD compare to expectations based on optimality theory? To address this question, we integrated the Dynamic Evapotranspiration Partitioning Approach for Rapid Timescales with a stochastic antecedent model to estimate ecosystem-level WUE (GPP/T) and the net sensitivity of WUE to VPD, or k Dynamic , which we compare to the theoretical optimal sensitivity of k = ½. Our results show that optimality theory is not always appropriate, and k Dynamic often deviates from ½, especially at some of the more arid sites or during periods of low soil moisture. At less arid, higher elevation sites, k Dynamic is most consistent with optimality theory at moderate VPD levels, but not at high VPD. In general, the sensitivity of WUE to VPD is highly variable such that k Dynamic exhibits notable daily and seasonal variability, suggesting highly dynamic stomatal behavior. These results emphasize that representing plant water-use strategies as dynamic in time and space is critical to improving large-scale estimates of plant water use.

New Mexico↗
USGS2025

Apatite geo-thermochronology and geochemistry constrain Oligocene-Miocene growth and geodynamics of the northeastern Tibetan Plateau

Understanding the geodynamics of plateau evolution requires examining the spatial and temporal aspects of mountain building in the northeastern Tibetan Plateau, which are still under debate. Here we integrate apatite geo-thermochronological and geochemical data from the Oligocene-Miocene succession of the Xunhua Basin to elucidate the evolution of the regional topography. The results suggest sediment provenance changes, at ca. 28, 20 and 12 Ma, indicating topographic growth of the West Qinling, Laji Shan, and Jishi Shan source areas, respectively. Our findings reveal Oligocene-Miocene stepwise deformation and middle Miocene stress reorganization within the northeastern Tibetan Plateau. We attribute this to Oligocene lithospheric foundering beneath the south-central Tibetan Plateau and the middle Miocene initiation of sinistral strike-slip faults due to the underthrusting of India and North China. This study highlights the roles of lithospheric removal and continental underthrusting in plateau growth, and the value of multi-proxy apatite analyses in provenance studies.

Northeastern Tibetan Plateau↗
USGS2025

Earth Mapping Resources Initiative protocols—Sampling hard-rock mine waste and perpetual mine water sources

Supporting the overarching goal to evaluate critical minerals nationwide, the mine waste characterization effort in the U.S. Geological Survey (USGS) Earth Mapping Resources Initiative has created a series of protocols to standardize sampling carried out under this effort by the participating State geological surveys and their cooperators. The protocols are based on published, reviewed methods that can be deployed in the field. The protocols include (1) collecting and processing composite samples of mine and mill waste, including tailings, waste rock, gangue, heap leach piles, ore stockpiles, slag, or other mineralized and processed materials and (2) collecting and preserving water samples from perpetual or long-term mine water sources. The protocols also specify information to document on field sheets and detail the collection of geospatial data. The analytical methods used by the USGS and USGS contract laboratories are described in this report, including the data delivery pathway for USGS-derived data.

Scientific Investigations Report↗
USGS2024

Earthquake-triggered ground-failure inventory associated with the M7.1 2018 Southcentral Alaska earthquake

The 30 November 2018, magnitude (Mw) 7.1 earthquake in Southcentral Alaska triggered substantial landslides, liquefaction, and ground cracking throughout the region, resulting in widespread geotechnical damage to buildings and infrastructure. Despite a challenging reconnaissance and remote-sensing environment, we constructed a detailed digital inventory of ground failure associated with the event from several sources. Sources included information derived from remotely sensed data, and data compiled from literature, social media postings, and earthquake damage information compiled by local, state, and federal agencies. Each instance of ground failure within the inventory contains information on the location and type of observed ground failure, and the methods and data used to document the occurrence. Where high-quality data, such as LIDAR or satellite imagery, were available and showed the ground-failure instance clearly, the extent is mapped as a polygon or polyline. All other locations are mapped as points. There are a total of 886 ground-failure instances documented within the inventory (400 landslides, 286 liquefaction features, and 200 features unattributed to specific processes). A semi-quantitative confidence scheme is used to describe mapping certainty associated with each ground-failure feature. This inventory represents a relatively moderate ground-failure-triggering event that occurred in a subarctic environment. This data paper describes the content within the inventory, the inventory data collection procedures, and limitations of the data. Events of this type are not often documented in detail; thus, adding the inventory data to the US Geological Survey Open Repository of Earthquake-Triggered Ground-Failure Inventories further diversifies the datasets available to the scientific community to be used to better understand and model earthquake-triggered ground failure.

Alaska↗