USGS Science⌕ Search

SEARCH · USGS Science

Results for “Coastal Management”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75Linked to original sources

Comparative microhabitat characteristics at oviposition sites of the California red-legged frog ( Rana draytonii )

We studied the microhabitat characteristics of 747 egg masses of the federally-threatened Rana draytonii (California red-legged frog) at eight sites in California. our study showed that a broad range of aquatic habitats are utilized by ovipositing R. draytonii , including sites with perennial and ephemeral water sources, natural and constructed wetlands, lentic and lotic hydrology, and sites surrounded by protected lands and nested within modified urban areas. We recorded 45 different egg mass attachment types, although the use of only a few types was common at each site. These attachment types ranged from branches and roots of riparian trees, emergent and submergent wetland vegetation, flooded upland grassland/ruderal vegetation, and debris. eggs were deposited in relatively shallow water (mean 39.7 cm) when compared to maximum site depths. We found that most frogs in artificial pond, natural creek, and artificial channel habitats deposited egg masses within one meter of the shore, while egg masses in a seasonal marsh averaged 27.3 m from the shore due to extensive emergent vegetation. Rana draytonii appeared to delay breeding in lotic habitats and in more inland sites compared to lentic habitats and coastal sites. eggs occurred as early as mid-december at a coastal artificial pond and as late as mid-April in an inland natural creek. We speculate that this delay in breeding may represent a method of avoiding high-flow events and/or freezing temperatures. Understanding the factors related to the reproductive needs of this species can contribute to creating, managing, or preserving appropriate habitat, and promoting species recovery.

Herpetological Conservation and Biology↗

Residence times and nitrate transport in ground water discharging to streams in the Chesapeake Bay Watershed

One of the major water-quality problems in the Chesapeake Bay is an overabundance of nutrients from the streams and rivers that discharge to the Bay. Some of these nutrients are from nonpoint sources such as atmospheric deposition, agricultural manure and fertilizer, and septic systems. The effects of efforts to control nonpoint sources, however, can be difficult to quantify because of the lag time between changes at the land surface and the response in the base-flow (ground water) component of streams. To help resource managers understand the lag time between implementation of management practices and subsequent response in the nutrient concentrations in the base-flow component of streamflow, a study of ground-water discharge, residence time, and nitrate transport in springs throughout the Chesapeake Bay Watershed and in four smaller watersheds in selected hydrogeomorphic regions (HGMRs) was conducted. The four watersheds were in the Coastal Plain Uplands, Piedmont crystalline, Valley and Ridge carbonate, and Valley and Ridge siliciclastic HGMRs. A study of springs to estimate an apparent age of the ground water was based on analyses for concentrations of chlorofluorocarbons in water samples collected from 48 springs in the Chesapeake Bay Watershed. Results of the analysis indicate that median age for all the samples was 10 years, with the 25th percentile having an age of 7 years and the 75th percentile having an age of 13 years. Although the number of samples collected in each HGMR was limited, there did not appear to be distinct differences in the ages between the HGMRs. The ranges were similar between the major HGMRs above the Fall Line (modern to about 50 years), with only two HGMRs of small geographic extent (Piedmont carbonate and Mesozoic Lowland) having ranges of modern to about 10 years. The median values of all the HGMRs ranged from 7 to 11 years. Not enough samples were collected in the Coastal Plain for comparison. Spring samples showed slightly younger water under wet conditions than under dry conditions. The apparent age of water from wells, springs, and other ground-water discharge points in the four targeted watersheds was modern to 60 years, which was similar to the apparent ages from the spring study. In the Pocomoke River Watershed in the Coastal Plain Uplands HGMR, the apparent age of ground-water samples ranged from 0 to 60 years; the ages in the vicinity of the streams ranged from 0 to 23 years. The apparent ages of ground water in the Polecat Creek Watershed in the Piedmont crystalline HGMR ranged from 2 to 30 years. The apparent ages of water from wells in the Muddy Creek Watershed in the Valley and Ridge carbonate HGMR ranged from 10 to 20 years (except for a single sample that was 45 years). The ages in the East Mahantango Creek Watershed in the Valley and Ridge siliciclastic HGMR ranged from 0 to 50 years. The distribution in apparent age of water from wells in the targeted watersheds, however, generally is older than that for water from the springs. The median age of water from wells in the Muddy Creek Watershed, for example, was 15 years, compared to 11 years for the water from the springs in that watershed, and less than 10 years for water from all springs in the spring study. The similarity in the ranges in apparent age of water from the wells and from the springs shows that the samples from the targeted watersheds and springs have bracketed the range of apparent ages that would be expected in the shallow ground-water-flow systems throughout the Chesapeake Bay Watershed. The apparent age of water from individual wells does not necessarily represent the entire distribution of ages of the discharging ground water, and it is this distribution of ages that affects the response of nutrient concentrations in stream base flow. Nutrient-reduction scenarios were modeled for two watersheds for which the distribution of apparent ground-water ages was available, the East Mahantango Creek Watershed in the Valley and Ridge siliciclastic HGMR and the Locust Grove Watershed in the Coastal Plain Uplands HGMR. A nutrient-reduction scenario was created for East Mahantango Creek, where the average residence time was determined to be approximately 10 years on the basis of the output of particle tracking from a ground-water-flow model. This scenario showed decreases of nearly 50 percent in base-flow concentrations of nitrate in streams within the first year after the reduction in nitrogen input; smaller reductions in nitrate concentration occurred in each subsequent year. A second scenario for that same watershed, in which the same 10-year average residence time was assumed and an exponential model was used for analysis, showed that a 50-percent reduction in base-flow concentrations of nitrate could take up to 5 years. For the Locust Grove Watershed, in which an average residence time of 32 years was assumed, simulation with the exponential model showed that it may take more than 20 years to achieve a 50-percent reduction in base-flow concentra-tions of nitrate. Although it was not possible to construct such scenarios for all watersheds, these examples show the range of possible responses to changes in nutrient inputs in two very different types of watersheds. Findings from this study include information on factors that affect ground-water age, spatial distribution of ages, and nitrogen transport. In the East Mahantango Creek Watershed and the Polecat Creek Watershed, the residence time varied spatially depending on the position of the flow path, and temporally depending on the recharge conditions. Generally, ground water in areas near the stream had short residence times and the water in upland areas had longer residence times. Water traveling through deep layers had longer residence times than water traveling through shallow layers, and residence times were faster under high recharge conditions than low recharge conditions. Ground water in the Pocomoke Watershed exhibits a similar pattern: younger water discharges to small order streams in headwater basins and older water discharges to larger streams near the basin outlet. Factors affecting nitrogen transport in ground water include spatial and temporal variation in input sources, ground-water age, and aquifer processes that lead to denitrification. Spatial and temporal variations in nitrogen sources affect all the watersheds. Tributaries with higher inputs of nitrogen have higher concentrations in stream base flow. Areas where nitrogen application rates have increased over time show an age-nitrate relation in ground-water samples. The age-nitrate relation can be affected by denitrification, which occurs in Pocomoke and East Mahantango Creeks but is not evident in Polecat and Muddy Creeks. In East Mahantango Creek, the level of denitrification is significant in water with residence times greater than 20 years, but because this is a small component of overall ground-water discharge to a stream, it may not remove a significant quantity of nitrogen from the system. Denitrification in Pocomoke Creek is significant and appears to affect mostly older water discharging to streams. Therefore, if most of the nitrogen entering these two streams is associated with the discharge of younger ground water, denitrification may not greatly affect the overall nitrogen delivery to these streams. Other findings of this study show that nitrate in ground water discharging along preferential flow paths may not be affected by natural processes, such as denitrification or uptake by riparian vegetation. Seeps to swales and ditches beneath the north uplands at Polecat Creek indicate a shallow water table and discharge of young ground water whereas the absence of such seeps on the south side indicates a deep water table and a lack of young ground water. Similarly, discharge at the base of the slope and to the valley wetland south of the creek but not north of the creek indicates a different role for the riparian forest on the two sides of the creek. In many of the systems where water discharges at the base of slopes to wetlands, ditches have been dug to drain the valley. Such drainage circumvents possible removal of nitrate by riparian vegetation. Because ground-water residence times do not appear directly related to the HGMRs, the targeting of management practices will achieve the most rapid response in water quality if directed at 1) watersheds with large agricultural sources of nitrate, 2) areas with the shortest ground-water-flow paths and 3) areas not affected by significant denitrification. The fastest response in stream base-flow concentrations of nitrogen to implementation of management practices would be to implement practices in those areas with the highest loads rather than attempt to target practices on the basis of HGMR stratification. Overall findings of the study indicate that 1) ground-water contributions to nitrogen in streamflow are significant, 2) some response to management practices should be evident in base-flow concentrations of nitrogen and loads within 1 to 5 years in watersheds with the shortest average residence times, but response time may be closer to 20 years in watersheds with longer average ground-water residence times, 3) the majority of the response in ground-water discharge to any changes in management practices will be distributed over a 10-year time period even in the watersheds with the fastest response times, and 4) given that half the streamflow is from ground-water discharge and the other half is runoff or soil water, about 90 percent of total water being discharged to a stream will be less than about a decade old; therefore, full implementation of nutrient reductions may result in improved streamwater quality in about a decade. In the more-likely scenario of gradual source reduction, the reduction in concentrations of nitrate in streams and aquifers would take longer than the examples shown here.

Chesapeake Bay watershed↗

Summary of hydrogeology and simulation of ground-water flow and land-surface subsidence in the northern part of the Gulf Coast aquifer system, Texas

The northern part of the Gulf Coast aquifer system in Texas, which includes the Chicot, Evangeline, and Jasper aquifers, supplies most of the water used for industrial, municipal, agricultural, and commercial purposes for an approximately 25,000- square-mile (mi 2 ) area that includes the Beaumont and Houston metropolitan areas. The area has an abundant amount of potable ground water, but withdrawals of large quantities of ground water have resulted in potentiometric-surface declines in the Chicot, Evangeline, and Jasper aquifers and land-surface subsidence from depressurization and compaction of clay layers interbedded in the aquifer sediments. This fact sheet summarizes a study done in cooperation with the Texas Water Development Board (TWDB) and the Harris-Galveston Coastal Subsidence District (HGCSD) as a part of the TWDB Ground-Water Availability Modeling (or Model) (GAM) program. The study was designed to develop and test a ground-water-flow model of the northern part of the Gulf Coast aquifer system in the GAM area (fig. 1) that waterresource managers can use as a tool to address future groundwater- availability issues.

Texas↗

EAARL Coastal Topography - Northern Gulf of Mexico, 2007: First surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) elevation data were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. The project provides highly detailed and accurate datasets of select barrier islands and peninsular regions of Louisiana, Mississippi, Alabama, and Florida, acquired June 27-30, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Alabama, Mississippi↗

A numerical investigation of the mechanisms controlling salt intrusion in the Delaware Bay Estuary

Salinity intrusion in coastal systems is mainly controlled by freshwater inflows. However, extreme events like drought, low-pressure storms, and longer-term sea level rise can exacerbate the landward salt migration and threaten economic infrastructure and ecological health. Along the eastern seaboard of the United States, approximately 13 million people rely on the water resources of the Delaware River basin. Salinity intrusion is actively managed through river discharge targets to suppress the propagation of the salt front (∼0.52 daily averaged psu line). The purpose of this study is to examine the mechanisms controlling the location of the salt front in the Delaware Bay estuary using a calibrated three-dimensional hydrodynamic model, the Coupled Ocean Atmosphere Wave and Sediment Transport modeling system. This study explored how river discharge, tidal motions, interactions with bathymetric and topographic features, and meteorological events affected the location of the salt front. The model was forced with tides, subtidal water levels, bulk atmospheric conditions, and waves. Compared with the observationally derived location of the salt front line, the model captured the major dynamics throughout the year and performed particularly well during times of low discharge, when salinity intruded up estuary at a constant rate of 0.4 km /day . The daily average salt front moved almost 16 km (10 mi) within a neap-spring tidal cycle, and low-pressure storm systems were found to move the daily averaged salt front by 13–16 km in one event.

Delaware, New Jersey, Pennsylvania↗

Predicting coastal retreat in the Florida Big Bend region of the Gulf Coast under climate change induced sea-level rise

Many wildlife preserves and refuges in coastal areas of our nation are slowly being inundated by rising sea-level. Land elevation and tidal flooding are key factors controlling the extent and zonation of coastal habitats. Warming of our global environment threatens to speed the rate of sea-level rise and perhaps further amplify the detrimental effects of tropical storms, droughts, and lightning fires. A field and modeling study was conducted to determine the current status of emergent vegetation and surficial hydrology and to predict marsh transgression under rising sea-level. Field surveys were conducted to relate vegetation cover and ecotones to surface elevation and tidal inundation. A regional site application of a GIS-based simulation model, WETLANDS, was developed to predict ecosystem response to changing sea-level conditions on a coastal reach of the Big Bend region in northwest Florida. The WETLANDS model contains functional probabilities of community tolerance to flooding conditions that dictate the rate and process of ecological succession and coastal retreat. Map information of hypsography and bathymetry of the study area were digitized and interpolated to construct a digital elevation model. Classified thematic mapper imagery of aquatic and terrestrial habitat at a community level was used to initialize model simulation by vegetative type. Model simulations were generated to predict a likelihood index of habitat change and conversion under different scenarios of sea-level rise. The WETLANDS model was applied to track the process and pattern of coastal inundation over space and time for low, mid, and high sea-level rise projections of 15, 50, and 95 cm over the next century. Model results indicated that major portions of this coastal zone will be permanently inundated by 2100, bringing about a combined migration of marsh habitat and displacement of forest habitat. Results show that lowland pine forests will undergo retreat on the order of thousands of hectares over the 21st century. Coastal marsh extent may actually increase slightly as a function of the low lying topography. Socioeconomic implications may be nominal for this area given its remote and fairly undeveloped and protected coast-202 line. The model offers a technological tool for research and policy purposes that allows for effective land and water management, risk assessment, and cumulative impact analysis of wetland systems and landscapes.

Florida↗

Riparian ecosystem creation and restoration: a literature summary

Riparian ecosystems generally compose a minor proportion of surrounding areas, but typically are more structurally diverse and more productive in plant and animal biomass than adjacent upland areas. Riparian areas supply food, cover, and water (especially important in the arid West) for a large diversity of animals, and serve as migration routes and forest connectors between habitats for a variety of wildlife, particularly ungulates and birds. Because riparian ecosystems often are relatively small areas and occur in conjunction with waterways, they are vulnerable to severe alteration. Riparian ecosystems throughout the U.S. have been heavily impacted by man's activities. Riparian ecosystem creation and restoration have been used as mitigation for project impacts from highway, bridge, and pipeline construction; water development; flood control channel modifications; industrial and residential development; agriculture; irrigation; livestock grazing; mining; and accidental habitat loss. Creation of a riparian ecosystem in| a more mesic upland area (e.g., ‘grassland or cropland) adjacent to a river requires appropriate water supply and grading the topography to suitable elevations to support plantings of riparian vegetation. Restoration involves returning the ecosystem to pre disturbance conditions and typically implies revegetation. Removing exotic vegetation or restoring water supplies to pre disturbance level also may be involved. Enhancement of riparian ecosystems commonly refers to improving existing conditions to increase habitat value, usually by increasing plant or community diversity to increase value for wildlife. Managing a riparian ecosystem typically involves enhancement techniques. However, creation and restoration projects often involve use of techniques considered more management-oriented (e.g., fencing to prevent cattle grazing until planted vegetation of a created or restored wetland is established). Protection of an existing riparian ecosystem from impact should be of utmost importance during planning and construction phases of development projects. If loss or damage is unavoidable, wetland creation or restoration can be used as mitigation. Compared to other wetland types (e.g., coastal wetlands), projects and techniques involving creation or restoration of riparian ecosystems are not well documented. For example, only 8% of the records in the WCR Data Base contained information on riparian ecosystems, whereas 31% of the records contained information on coastal emergent or forested ecosystems. To provide a source of currently available literature, riparian information from 92 records (primarily published papers or reports) in the U.S. Fish and Wildlife Service's (FWS) Wetland Creation-Restoration (WCR) Data Base (Schneller-McDonald et al. 1988) was used to develop a literature summary of creation and restoration of riparian ecosystems. The summary provides an overview of the status of riparian ecosystems in the U.S., a discussion of several riparian functions, and a review of some techniques used for planning, implementing, monitoring, and measuring project success of creation-restoration efforts. Case studies of various creation or restoration projects are used to demonstrate these techniques and to report some results of their use. Several well-documented case studies are discussed in detail to illustrate more extensive efforts to plan, implement, or monitor riparian ecosystem creation-restoration projects. For the purpose of this report, riparian ecosystems are defined as landscapes adjacent to drainageways of floodplains that exhibit vegetation, soil, and hydrologic mosaics along topographic and moisture gradients that are distinct from the predominant landscape surface types. Major plant communities are described under palustrine system in Cowardin et al. (1979). Literature from the WCR Data Base was used to provide a summary of riparian ecosystem creation-restoration literature. Thus, information concerning natural systems is not included unless discussed in these articles. This focus allows the reader to compare relative information available on riparian ecosystem creation-restoration efforts. However, this focus also results in limited information in some sections of the report (e.g., Status of Riparian Ecosystems in the U.S.). Individuals involved in riparian ecosystem creation-restoration efforts are encouraged to thoroughly examine available literature on natural and altered systems. Brinson et al. (1981) provide a comprehensive review and synthesis of the ecology and status of riparian ecosystems. Over 500 articles are cited in their 124-page report. Chapters include the following topics: status of riparian ecosystems in the U.S., ecological functions and properties of riparian ecosystems (e.g., geomorphology, primary productivity, nutrient cycling, hydrology), importance of riparian ecosystems to fish and wildlife, and considerations in valuation (ecologic and economic) of riparian ecosystems. Brinson et al. (1981) also discuss management of riparian ecosystems. Riparian ecosystem management literature was not included in the WCR Data Base, unless the article also discussed creation or restoration.

Report↗

EAARL Coastal Topography-Pearl River Delta 2008: Bare Earth

These remotely sensed, geographically referenced elevation measurements of Lidar-derived bare earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the University of New Orleans (UNO), Pontchartrain Institute for Environmental Sciences (PIES), New Orleans, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Pearl River Delta in Louisiana and Mississippi, acquired March 9-11, 2008. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗

EAARL Coastal Topography-Pearl River Delta 2008: First Surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the University of New Orleans (UNO), Pontchartrain Institute for Environmental Sciences (PIES), New Orleans, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Pearl River Delta in Louisiana and Mississippi, acquired March 9-11, 2008. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗

ATM Coastal Topography-Alabama 2001

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Alabama coastline, acquired October 3-4, 2001. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative scanning Lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning Lidar system that measures high-resolution topography of the land surface, and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for pre-survey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography.

Alabama↗

EAARL coastal topography — Northern Gulf of Mexico, 2007: Bare earth

These remotely sensed, geographically referenced elevation measurements of Lidar -derived bare earth ( BE ) topography were produced as a collaborative effort between the U.S. Geological Survey ( USGS ), Florida Integrated Science Center ( FISC ), St. Petersburg, FL ; the National Park Service ( NPS ), Gulf Coast Network, Lafayette, LA ; and the National Aeronautics and Space Administration ( NASA ), Wallops Flight Facility, VA . The purpose of this project is to provide highly detailed and accurate datasets of select barrier islands and peninsular regions of Louisiana, Mississippi, Alabama, and Florida, acquired on June 27-30, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar ( EAARL ), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar , a down-looking red-green-blue ( RGB ) digital camera, a high-resolution multi-spectral color infrared ( CIR ) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system and the resulting data were then processed using the Airborne Lidar Processing System ( ALPS ), a custom-built processing system developed in a NASA - USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

northern Gulf of Mexico↗

Multiple dimensions define thresholds for population resilience of the eastern oyster, Crassostrea virginica

A species' distribution depends on its tolerance to environmental conditions. These conditions are defined by a minimum, maximum, and optimal ranges of single and combined factors. Forays into environmental conditions outside the minimum or maximum tolerance of a species (i.e., thresholds) are predicted to have large effects on a species' population and may help predict population resilience in the face of changing conditions. Here, we explore ecological thresholds for an important fisheries species and ecosystem engineer, Crassostrea virginica (eastern oyster). In coastal Louisiana, extreme freshwater inputs from rivers and precipitation events impact estuarine salinity, which is a key driver of oyster population dynamics. Using daily salinity and monthly oyster abundance monitoring data across Louisiana estuaries, we explore low salinity exposure threshold levels for oysters. Two statistical approaches were applied, with each model highlighting a different operational definition of a threshold: random forest models identified a threshold as an abrupt change in the oyster abundance- salinity relationship, while Bayesian models identified an increased probability of oyster abundance dropping below a critical threshold, defined here as less than 50% of the 5-year mean. All model results indicate oysters in coastal Louisiana experience low salinity exposure thresholds, defined as the number of consecutive summer days of salinity levels less than 5. However, actual number of days and salinity threshold differed by statistical approach, oyster life stage, and estuary highlighting the multiple dimensions defining ecological thresholds. While thresholds are considered important benchmarks to inform management and assess population or ecosystem vulnerability, our results reveal the need to carefully relate threshold definition to management goals and to acknowledge that thresholds may be highly context dependent.

Louisiana↗

The challenges and opportunities in cumulative effects assessment

The cumulative effects of increasing human use of the ocean and coastal zone have contributed to a rapid decline in ocean and coastal resources. As a result, scientists are investigating how multiple, overlapping stressors accumulate in the environment and impact ecosystems. These investigations are the foundation for the development of new tools that account for and predict cumulative effects in order to more adequately prevent or mitigate negative effects. Despite scientific advances, legal requirements, and management guidance, those who conduct assessments—including resource managers, agency staff, and consultants—continue to struggle to thoroughly evaluate cumulative effects, particularly as part of the environmental assessment process. Even though 45 years have passed since the United States National Environmental Policy Act was enacted, which set a precedent for environmental assessment around the world, defining impacts, baseline, scale, and significance are still major challenges associated with assessing cumulative effects. In addition, we know little about how practitioners tackle these challenges or how assessment aligns with current scientific recommendations. To shed more light on these challenges and gaps, we undertook a comparative study on how cumulative effects assessment (CEA) is conducted by practitioners operating under some of the most well-developed environmental laws around the globe: California, USA; British Columbia, Canada; Queensland, Australia; and New Zealand. We found that practitioners used a broad and varied definition of impact for CEA, which led to differences in how baseline, scale, and significance were determined. We also found that practice and science are not closely aligned and, as such, we highlight opportunities for managers, policy makers, practitioners, and scientists to improve environmental assessment.

Environmental Impact Assessment Review↗

Coastal vulnerability assessment of Assateague Island National Seashore (ASIS) to sea-level rise

A coastal vulnerability index (CVI, http://pubs.usgs.gov/of/2004/1020/html/cvi.htm) was used to map relative vulnerability of the coast to future sea-level rise within Assateague Island National Seashore (ASIS) in Maryland and Virginia. The CVI ranks the following in terms of their physical contribution to sea-level rise-related coastal change: geomorphology, regional coastal slope, rate of relative sea-level rise, shoreline change rates, mean tidal range and mean wave height. Rankings for each variable were combined and an index value calculated for 1-minute grid cells covering the park. The CVI highlights those regions where the physical effects of sea-level rise might be the greatest. This approach combines the coastal system's susceptibility to change with its natural ability to adapt to changing environmental conditions, yielding a quantitative, although relative, measure of the park's natural vulnerability to the effects of sea-level rise. The CVI provides an objective technique for evaluation and long-term planning by scientists and park managers. Assateague Island consists of stable and washover dominated portions of barrier beach backed by wetland and marsh. The areas within Assateague that are likely to be most vulnerable to sea-level rise are those with the highest occurrence of overwash and the highest rates of shoreline change.

Maryland, Virginia↗

Coastal vulnerability assessment of Olympic National Park to sea-level rise

A coastal vulnerability index (CVI) was used to map the relative vulnerability of the coast to future sea-level rise within Olympic National Park (OLYM), Washington. The CVI scores the following in terms of their physical contribution to sea-level rise-related coastal change: geomorphology, regional coastal slope, rate of relative sea-level rise, shoreline change rates, mean tidal range and mean wave height. The rankings for each variable were combined and an index value calculated for 1-minute grid cells covering the park. The CVI highlights those regions where the physical effects of sea-level rise might be the greatest. This approach combines the coastal system's susceptibility to change with its natural ability to adapt to changing environmental conditions, yielding a quantitative, although relative, measure of the park's natural vulnerability to the effects of sea-level rise. The CVI provides an objective technique for evaluation and long-term planning by scientists and park managers. The Olympic National Park coast consists of rocky headlands, pocket beaches, glacial-fluvial features, and sand and gravel beaches. The Olympic coastline that is most vulnerable to sea-level rise are beaches in gently sloping areas.

Washington↗

Coastal vulnerability assessment of Cape Hatteras National Seashore (CAHA) to sea-level rise

A coastal vulnerability index (CVI) was used to map the relative vulnerability of the coast to future sea-level rise within Cape Hatteras National Seashore (CAHA) in North Carolina. The CVI ranks the following in terms of their physical contribution to sea-level rise-related coastal change: geomorphology, regional coastal slope, rate of relative sea-level rise, historical shoreline change rates, mean tidal range, and mean significant wave height. The rankings for each variable were combined and an index value was calculated for 1-minute grid cells covering the park. The CVI highlights those regions where the physical effects of sea-level rise might be the greatest. This approach combines the coastal system's susceptibility to change with its natural ability to adapt to changing environmental conditions, yielding a quantitative, although relative, measure of the park's natural vulnerability to the effects of sea-level rise. The CVI provides an objective technique for evaluation and long-term planning by scientists and park managers. Cape Hatteras National Seashore consists of stable and washover dominated segments of barrier beach backed by wetland and marsh. The areas within Cape Hatteras that are likely to be most vulnerable to sea-level rise are those with the highest occurrence of overwash and the highest rates of shoreline change.

North Carolina↗

Coastal Vulnerability Assessment of Padre Island National Seashore (PAIS) to Sea-Level Rise

A coastal vulnerability index (CVI) was used to map the relative vulnerability of the coast to future sea-level rise within Padre Island National Seashore in Texas. The CVI ranks the following in terms of their physical contribution to sea-level rise-related coastal change: geomorphology, regional coastal slope, rate of relative sea-level rise, shoreline change rates, mean tidal range and mean significant wave height. The rankings for each variable were combined and an index value calculated for 1-minute grid cells covering the park. The CVI highlights those regions where the physical effects of sea-level rise might be the greatest. This approach combines the coastal system's susceptibility to change with its natural ability to adapt to changing environmental conditions, yielding a quantitative, although relative, measure of the park's natural vulnerability to the effects of sea-level rise. The CVI provides an objective technique for evaluation and long-term planning by scientists and park managers. Padre Island National Seashore consists of stable to washover dominated portions of barrier beach backed by wetland, marsh, tidal flat, or grassland. The areas within Padre that are likely to be most vulnerable to sea-level rise are those with the highest occurrence of overwash and the highest rates of shoreline change.

Texas↗

Coastal vulnerability assessment of Cumberland Island National Seashore (CUIS) to sea-level rise

A coastal vulnerability index (CVI) was used to map the relative vulnerability of the coast to future sea-level rise within Cumberland Island National Seashore in Georgia. The CVI ranks the following in terms of their physical contribution to sea-level rise-related coastal change: geomorphology, regional coastal slope, rate of relative sea-level rise, historical shoreline change rates, mean tidal range and mean significant wave height. The rankings for each input variable were combined and an index value calculated for 1-minute grid cells covering the park. The CVI highlights those regions where the physical effects of sea-level rise might be the greatest. This approach combines the coastal system's susceptibility to change with its natural ability to adapt to changing environmental conditions, yielding a quantitative, although relative, measure of the park's natural vulnerability to the effects of sea-level rise. The CVI provides an objective technique for evaluation and long-term planning by scientists and park managers. Cumberland Island National Seashore consists of stable to washover-dominated portions of barrier beach backed by wetland, marsh, mudflat and tidal creek. The areas within Cumberland that are likely to be most vulnerable to sea-level rise are those with the lowest foredune ridge and highest rates of shoreline erosion.

Georgia↗