SEARCH · USGS Science

Results for “Groundwater”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74Linked to original sources

USGS2024

Evaluation of groundwater resources in the Upper White River Basin within Mount Rainier National Park, Washington State, 2020

The U.S. Geological Survey (USGS), in cooperation with the National Park Service, investigated groundwater gains and losses on the upper White River within Mount Rainier National Park in Washington. This investigation was conducted using stream discharge measurements at 14 locations within 7 reaches over a 6.5-mile river length from near the White River’s origin at the terminus of the Emmons Glacier on Mount Rainier to the White River Entrance near the northeast boundary of Mount Rainier National Park. Locations selected for the stream discharge measurements were on the main channel of the White River and on tributary streams near their confluence with the White River. A soil-water-balance (SWB) model analysis was also performed on the White River basin to estimate groundwater recharge throughout the basin during the time of the study. Analyses were made for the White River basin at the sub-basin (zone) scale to determine groundwater input to the stream for individual stream reaches. The gridded SWB model was simulated at a 10-meter (m) horizontal resolution, where recharge simulations were constructed using five spatially distributed datasets. Daily climate data as input for the simulation included gridded daily precipitation and air temperature. Upon analysis of the seepage run results, three of the seven reaches showed groundwater gains in this study. The SWB model results were used in conjunction with the baseflow gain totals in the reaches to estimate the length of time for recharge to become base flow. Further analysis estimated the rates of groundwater flow in the zones with adjacent gaining reaches. A streamflow gain curve was created from a simple flow model for each of the zones to relate the recharge from the zones to the adjacent reaches on the White River and tributaries. The fit of the streamflow gain curve to the calculated streamflow gain during the seepage run was used to analyze where the recharge from each zone resulted as streamflow gain. Consecutive reach losses from zones D and L were immediately followed downstream by a relatively large gain in zone GH, indicating that the gain in the reach adjacent to zone GH could be from the recharge in zones D and L.

Washington↗

USGS2024

Potential corrosivity of untreated groundwater in Louisiana

Corrosive groundwater can cause lead, copper, and other metals to leach from pipes and plumbing fixtures in water distribution systems. Metals, if ingested, could lead to serious health implications to the nearly 2.9 million people in Louisiana who obtain their drinking water from groundwater sources. Four indices—the Langelier Saturation Index (LSI), Ryznar Stability Index (RSI), Puckorius Scaling Index (PSI), and the Potential to Promote Galvanic Corrosion (PPGC)—in addition to an analysis which normalized the results from the existing indices, the Combined Index (CI), were used to assess the corrosivity of groundwater in Louisiana and identify areas within eight major aquifers and aquifer systems with moderate to high corrosivity potential. The purpose of this study is to provide State and local governments, public water system managers, and the nearly 500,000 private well owners in Louisiana with information needed to manage drinking-water supplies and mitigate potential health risks related to leaching of metals from water pipes and fixtures. The average scores of untreated groundwater samples from approximately 375 wells by index are as follows: LSI, −1.28; RSI, 9.78; PSI, 9.34; and CI, 4.14. The PPGC does not produce a numerical score, but the total percentage of class counts can be used to assign a classification; overall, samples in Louisiana were classified as significant concern. The percentages of groundwater samples from wells classified as potentially corrosive, by index, are as follows: LSI, 53 percent; RSI, 94 percent; PSI, 81 percent; PPGC, 98 percent; and CI, 81 percent. The percentages of samples classified as indeterminate, by index, are as follows: LSI, 46 percent; RSI, 5 percent; PSI, 12 percent; PPGC, 0 percent; and CI, 18 percent.

Louisiana↗

USGS2025

Estimated hydrogeologic, spatial, and temporal distribution of self-supplied domestic groundwater withdrawals for aquifers of the Virginia Coastal Plain

Water use from private-domestic wells accounts for nearly 40 percent of total groundwater withdrawals in the Virginia Coastal Plain Physiographic Province (henceforth called the Virginia Coastal Plain). However, because self-supplied domestic water use generally falls below the Virginia Department of Environmental Quality (VDEQ) reporting and management threshold of 300,000 gallons per month, quantifying these withdrawals is challenging. This report builds upon the foundation of previous U.S. Geological Survey investigations by providing revised techniques to improve estimates of the aquifer source, spatial distribution, and monthly magnitude of these groundwater withdrawals. The aquifer sources of private-domestic wells in the Virginia Coastal Plain were estimated by cross-referencing 8,264 well records from the VDEQ and the Virginia Department of Health to a digital model of the Virginia Coastal Plain hydrogeologic framework. This analysis highlights the regional importance of the Yorktown-Eastover, Potomac, and surficial aquifers. Collectively, these three aquifers account for 80 percent of self-supplied domestic groundwater withdrawals. The population using self-supplied domestic water was estimated using census blocks, well-use ratios, building footprints, and land-use and land-cover data to produce a high-resolution, disaggregated, raster-based dataset. This approach improves upon previous models at the census-block or road-network scale by reducing the low-density spread of the self-supplied domestic population across undeveloped areas and concentrating the population and its corresponding water use in the areas where it is most likely to occur. Results show that an estimated 475,332 people comprise the 2020 self-supplied domestic population of the Virginia Coastal Plain, an increase of 5.7 percent since 2010, and the greatest concentrations of self-supplied domestic population surround large cities. Estimates could be further refined with the addition of current and complete spatial data on public water-system service areas. The quantity of water used by the self-supplied domestic population was estimated by modifying published state per-capita water-use coefficients with the corresponding monthly variability assessed from Virginia Coastal Plain public water-system withdrawal data. This analysis estimates an average increase of 12 percent from June through August and an average decrease of 8 percent from December through March from the baseline annual average of 80 gallons per day per capita, which generally matches similar studies in the eastern United States. The application of these revised methodologies for the estimation of private-domestic wells and the self-supplied domestic population improves understanding of domestic groundwater use in the Virginia Coastal Plain across hydrogeologic, spatial, and temporal scales. These revisions help better inform water-resource managers and decision makers and support higher resolution groundwater modeling. Furthermore, these methods are transferrable to other areas where self-supplied domestic water withdrawals are important to the overall water budget.

Virginia↗

USGS2025

Conceptual and numerical groundwater flow model of the Iowa River alluvial aquifer near Tama County, Iowa, 1980 through 2022

The Iowa River alluvial aquifer is an important source of water on the Meskwaki Settlement in Tama County, Iowa, which is land owned by the Sac & Fox Tribe of the Mississippi in Iowa (commonly known as the Meskwaki Nation). The U.S. Geological Survey constructed a groundwater flow model, including a conceptual and numerical model, of the Iowa River alluvial aquifer and underlying hydrogeologic units near the Meskwaki Settlement in Tama County, Iowa, for the period of January 1980–August 2022 to estimate the fraction of water pumped from the Iowa River alluvial aquifer by Meskwaki Settlement wells that is derived from streamflow depletion in the Iowa River and its tributaries. Streamflow depletion is a reduction in streamflow caused by groundwater pumping and includes the interception by groundwater production wells of water that otherwise would have been discharged to streams (called “captured groundwater discharge”) and induced infiltration of streamflow to the production wells. Calibrated model runs were performed with no simulated pumping and simulated pumping only at Meskwaki Settlement wells, and the change in simulated flow rates between the groundwater system and streams for the two model runs represents the amount of streamflow depletion in the Iowa River and tributary streams resulting from pumping at the Meskwaki Settlement wells. Streamflow depletion in the Iowa River and its tributaries as a percentage of simulated pumping at the Meskwaki Settlement wells was calculated by dividing this difference by the total simulated pumping rate for the Meskwaki Settlement wells. The model results demonstrate that the mean monthly streamflow depletion, including induced infiltration and captured discharge, in the Iowa River and its tributary streams as a percentage of mean monthly pumping at the Meskwaki Settlement wells was 97.4 percent and ranged from 65.4 to 112 percent. Of the total streamflow depletion, mean monthly induced recharge was 20.9 percent and ranged from 4.9 to 37.2 percent. Mean monthly captured discharge was 76.5 percent and ranged from 57.1 to 97.1 percent. These results indicate that most of the water pumped from the Meskwaki Settlement wells is the result of streamflow depletion, in the form of both induced infiltration and captured discharge.

Iowa↗

USGS2013

Use of multi-node wells in the Groundwater-Management Process of MODFLOW-2005 (GWM-2005)

Many groundwater wells are open to multiple aquifers or to multiple intervals within a single aquifer. These types of wells can be represented in numerical simulations of groundwater flow by use of the Multi-Node Well (MNW) Packages developed for the U.S. Geological Survey’s MODFLOW model. However, previous versions of the Groundwater-Management (GWM) Process for MODFLOW did not allow the use of multi-node wells in groundwater-management formulations. This report describes modifications to the MODFLOW–2005 version of the GWM Process (GWM–2005) to provide for such use with the MNW2 Package. Multi-node wells can be incorporated into a management formulation as flow-rate decision variables for which optimal withdrawal or injection rates will be determined as part of the GWM–2005 solution process. In addition, the heads within multi-node wells can be used as head-type state variables, and, in that capacity, be included in the objective function or constraint set of a management formulation. Simple head bounds also can be defined to constrain water levels at multi-node wells. The report provides instructions for including multi-node wells in the GWM–2005 data-input files and a sample problem that demonstrates use of multi-node wells in a typical groundwater-management problem.

Techniques and Methods↗

USGS2014

Two graphical user interfaces for managing and analyzing MODFLOW groundwater-model scenarios

Scenario Manager and Scenario Analyzer are graphical user interfaces that facilitate the use of calibrated, MODFLOW-based groundwater models for investigating possible responses to proposed stresses on a groundwater system. Scenario Manager allows a user, starting with a calibrated model, to design and run model scenarios by adding or modifying stresses simulated by the model. Scenario Analyzer facilitates the process of extracting data from model output and preparing such display elements as maps, charts, and tables. Both programs are designed for users who are familiar with the science on which groundwater modeling is based but who may not have a groundwater modeler’s expertise in building and calibrating a groundwater model from start to finish. With Scenario Manager, the user can manipulate model input to simulate withdrawal or injection wells, time-variant specified hydraulic heads, recharge, and such surface-water features as rivers and canals. Input for stresses to be simulated comes from user-provided geographic information system files and time-series data files. A Scenario Manager project can contain multiple scenarios and is self-documenting. Scenario Analyzer can be used to analyze output from any MODFLOW-based model; it is not limited to use with scenarios generated by Scenario Manager. Model-simulated values of hydraulic head, drawdown, solute concentration, and cell-by-cell flow rates can be presented in display elements. Map data can be represented as lines of equal value (contours) or as a gradated color fill. Charts and tables display time-series data obtained from output generated by a transient-state model run or from user-provided text files of time-series data. A display element can be based entirely on output of a single model run, or, to facilitate comparison of results of multiple scenarios, an element can be based on output from multiple model runs. Scenario Analyzer can export display elements and supporting metadata as a Portable Document Format file.

Techniques and Methods↗

USGS2022

Documentation for the MODFLOW 6 Groundwater Transport Model

This report documents a new Groundwater Transport (GWT) Model for MODFLOW 6. The GWT Model simulates three-dimensional transport of a single chemical species in fowing groundwater based on a generalized control-volume fnite-difference approach. Although each GWT Model is only able to represent a single chemical species, multiple GWT Models may be invoked within a single MODFLOW 6 simulation to represent solute transport of multiple non-interacting chemical species. The GWT Model is designed to work with the Groundwater Flow (GWF) Model for MODFLOW 6, which simulates transient, three-dimensional groundwater fow. The version of the GWT model documented here must use the same spatial discretization used by the GWF Model; however, that spatial discretization can be represented by regular MODFLOW grids consisting of layers, rows, and columns, or by more general unstructured grids. The GWT Model simulates (1) advective transport, (2) the combined hydrodynamic dispersion processes of velocity-dependent mechanical dispersion and molecular diffusion, (3) adsorption and absorption (collectively referred to as sorption) of solutes by the aquifer matrix, (4) transfer between the mobile domain and one or more immobile domains, (5) frst-or zero-order solute decay or production, (6) mixing from groundwater sources and sinks, and (7) direct addition of solute mass. The GWT Model can also represent advective solute transport through advanced package features, such as streams, lakes, multi-aquifer wells, and the unsaturated zone. If the GWF Model application uses the Water Mover (MVR) Package to connect fow packages, then solute transport between these packages can also be represented. The transport processes described in this report have been implemented in a fully implicit manner and are solved in a system of equations using iterative numerical methods. The present version of the GWT Model for MODFLOW 6 does not have an option to calculate steady-state transport solutions; if a steady-state solution is required, then transient evolution of the solute must be represented using multiple time steps until no further changes in solute concentrations are detected.

Techniques and Methods↗

USGS2015

Documentation of a restart option for the U.S. Geological Survey coupled Groundwater and Surface-Water Flow (GSFLOW) model

A new option to write and read antecedent conditions (also referred to as initial conditions) has been developed for the U.S. Geological Survey (USGS) Groundwater and Surface-Water Flow (GSFLOW) numerical, hydrologic simulation code. GSFLOW is an integration of the USGS Precipitation-Runoff Modeling System (PRMS) and USGS Modular Groundwater-Flow Model (MODFLOW), and provides three simulation modes: MODFLOW-only, PRMS-only, and GSFLOW (or coupled). The new capability, referred to as the restart option, can be used for all three simulation modes, such that the results from a pair (or set) of spin-up and restart simulations are nearly identical to results produced from a continuous simulation for the same time period. The restart option writes all results to files at the end of a spin-up simulation that are required to initialize a subsequent restart simulation. Previous versions of GSFLOW have had some capability to save model results for use as antecedent condiitions in subsequent simulations; however, the existing capabilities were not comprehensive or easy to use. The new restart option supersedes the previous methods. The restart option was developed in collaboration with the National Oceanic and Atmospheric Administration, National Weather Service as part of the Integrated Water Resources Science and Services Partnership. The primary focus for the development of the restart option was to support medium-range (7- to 14-day) forecasts of low streamflow conditions made by the National Weather Service for critical water-supply basins in which groundwater plays an important role. The spin-up simulation should be run for a sufficient length of time necessary to establish antecedent conditions throughout a model domain. Each GSFLOW application can require different lengths of time to account for the hydrologic stresses to propagate through a coupled groundwater and surface-water system. Typically, groundwater hydrologic processes require many years to come into equilibrium with dynamic climate and other forcing (or stress) data, such as precipitation and well pumping, whereas runoff-dominated surface-water processes respond relatively quickly. Use of a spin-up simulation can substantially reduce execution-time requirements for applications where the time period of interest is small compared to the time for hydrologic memory; thus, use of the restart option can be an efficient strategy for forecast and calibration simulations that require multiple simulations starting from the same day.

Techniques and Methods↗

USGS2016

Applying downscaled Global Climate Model data to a groundwater model of the Suwannee River Basin, Florida, USA

The application of Global Climate Model (GCM) output to a hydrologic model allows for comparisons between simulated recent and future conditions and provides insight into the dynamics of hydrology as it may be affected by climate change. A previously developed numerical model of the Suwannee River Basin, Florida, USA, was modified and calibrated to represent transient conditions. A simulation of recent conditions was developed for the 372-month period 1970-2000 and was compared with a simulation of future conditions for a similar-length period 2039-2069, which uses downscaled GCM data. The MODFLOW groundwater-simulation code was used in both of these simulations, and two different MODFLOW boundary condition “packages” (River and Streamflow-Routing Packages) were used to represent interactions between surface-water and groundwater features. The hydrologic fluxes between the atmosphere and landscape for the simulation of future conditions were developed from dynamically downscaled precipitation and evapotranspiration (ET) data generated by the Community Climate System Model (CCSM). The downscaled precipitation data were interpolated for the Suwannee River model grid, and the downscaled ET data were used to develop potential ET and were interpolated to the grid. The fu¬ture period has higher simulated rainfall (10.8 percent) and ET (4.5 percent) than the recent period. The higher future rainfall causes simulated groundwater levels to rise in areas where they are deep and have little ET in either the recent or future case. However, in areas where groundwater levels were originally near the surface, the greater future ET causes groundwater levels to become lower despite the higher projected rainfall. The general implication is that unsaturated zone depth could be more spatially uniform in the future and vegetation that requires a range of conditions (substantially wetter or drier than aver¬age) could be detrimentally affected. This vegetation would include wetland species, especially in areas inland from the coast.

Florida↗

USGS2003

Using natural distributions of short-lived radium isotopes to quantify groundwater discharge and recharge

Radium activity in pore water of wetland sediments often differs from the amount expected from local production, decay, and exchange with solid phases. This disequilibrium results from vertical transport of radium with groundwater that flows between the underlying aquifer and surface water. In situations where groundwater recharge or discharge is significant, the rate of vertical water flow through wetland sediment can be determined from the radium disequilibrium by a combined model of transport, production, decay, and exchange with solid phases. We have developed and tested this technique at three sites in the freshwater portion of the Everglades by quantifying vertical advective velocities in areas with persistent groundwater recharge or discharge and estimating a coefficient of dispersion at a site that is subject to reversals between recharge and discharge. Groundwater velocities (v) were determined to be between 0 and -0.5 cm d-1 for a recharge site and 1.5 ?? 0.4 cm d-1 for a discharge site near Levee 39 in the Everglades. Strong gradients in 223Ra and 224Ra usually occurred at the base of the peat layer, which avoided the problems of other tracers (e.g., chloride) for which greatest sensitivity occurs near the peat surface - a zone readily disturbed by processes unrelated to groundwater flow. This technique should be easily applicable to any wetland system with different production rates of these isotopes in distinct sedimentary layers or surface water. The approach is most straightforward in systems where constant pore-water ionic strength can be assumed, simplifying the modeling of radium exchange.

Limnology and Oceanography↗

USGS2026

Proposing sources for discrete groundwater discharges to patterned pools in three regional raised northern peat bogs

Raised northern peat bogs are generally assumed to be entirely precipitation-fed (ombrogenous), suggesting they are void of groundwater (minerogenous) inflow from underlying sediments. Patterned pools in raised bogs have often been attributed to surficial flow filling depressions along the peat surface that produces subtle differences in peat pore-water chemistry. However, we present evidence that certain patterned pools may be partially fed by localized upwelling of minerogenous groundwater from underlying glacial sediments in three northern peat bogs of Maine, USA. Underlying permeable glacial deposits, embedded in hydraulically confining glacio-marine clay deposits, were delineated using ground-penetrating radar and transient electromagnetic surveys. Paired point measurements of temperature and specific conductance (SpC) were surveyed around pools, and statistical relationships indicative of groundwater upwelling were established. Uncrewed aerial systems (UAS) thermal infrared (TIR) mapping was conducted, augmented by handheld TIR imaging, to examine characteristic groundwater temperatures in cold and warm seasons across pool surfaces. Surface water samples were acquired to assess the relationship between SpC / temperature signals and elevated iron and manganese concentrations that could be indicative of glacial aquifer sources. The combined datasets present evidence for localized upwelling in pools underlain by glacial structures, and the possibility of minerogenous groundwater contributions. Upwelling through the peat matrix is possibly partially facilitated by macropore, “peat pipe” features that serve as preferential flowpaths of varying lengths to the surface. Such upwelling could drive a positive feedback loop where elevated concentrations of ionic constituents repeatedly dilate the peat matrix and/or terminal electron acceptors enhance anaerobic respiration and microbial activity, accelerating the humification of peat around patterned pools and potentially magnifying carbon loss.

Maine↗

USGS2026

Hazard potential of compound flooding from rainfall, storm surge, and groundwater in coastal New York and Connecticut

Compound flood events, the co-occurrence of multiple flood drivers, can result in flood hazard potential exceeding that of any single driver alone. To evaluate compound flooding in a semi-urbanized coastal area, historical records dating back to 1970 are used to study the co-occurrences of high precipitation, storm surge, and shallow groundwater conditions along the coastlines of New York and Connecticut. Joint return periods for coincident precipitation-surge events were computed using statistical dependence models and compared to the assumption of independence as a ratio, referred to here as a return period adjustment. Results indicate distinct seasonality where compound events in the area disproportionately occur in the cold season between October and April. Return period adjustments range from a factor of 1 to almost 9, demonstrating the range in precipitation-storm surge dependence across the study area. Across all 24 station triad locations, groundwater levels were elevated during times of precipitation- surge co-occurrence, reflecting the tendency for coastal storms and shallow groundwater conditions to co-occur seasonally. The result is a pseudo-trivariate compound flood hazard score and corresponding hazard map that integrates dependence between daily precipitation-surge events and overall monthly groundwater levels (as a precondition) into a relative compound hazard score. The location with the highest compound flood hazard score is on the south shore of Long Island, as well as locations across coastal Connecticut where groundwater levels compound the co-occurrence of heavy precipitation and storm surge.

Connecticut, New York↗

USGS2003

Noble gas loss may indicate groundwater flow across flow barriers in southern Nevada

Average calculated noble gas temperatures increase from 10 to 22 o C in groundwater from recharge to discharge areas in carbonate-rock aquifers of southern Nevada. Loss of noble gases from groundwater in these regional flow systems at flow barriers is the likely process that produces an increase in recharge noble gas temperatures. Emplacement of low permeability rock into high permeability aquifer rock and the presence of low permeability shear zones reduce aquifer thickness from thousands to tens of meters. At these flow barriers, which are more than 1,000 m lower than the average recharge altitude, noble gases exsolve from the groundwater by inclusion in gas bubbles formed near the barriers because of greatly reduced hydrostatic pressure. However, re-equilibration of noble gases in the groundwater with atmospheric air at the low altitude spring discharge area, at the terminus of the regional flow system, cannot be ruled out. Molecular diffusion is not an important process for removing noble gases from groundwater in the carbonate-rock aquifers because concentration gradients are small.

Conference Paper↗

USGS2008

Hydrochemical characterization of groundwater in the Akyem area, Ghana

The Akyem area is a small farming community located in southeastern Ghana. Groundwater samples from wells in the area were analyzed for concentrations of the major ions, silica, electrical conductivity and pH. The objective was to determine the main controls on the hydrochemistry of ground-water. Mass balance modeling was used together with multivariate R-mode hierarchical cluster analysis to determine the significant sources of variation in the hydrochemistry. Two water types exist in this area. The first is influenced most by the weathering of silicate minerals from the underlying geology, and is thus rich in silica, sodium, calcium, bicarbonate, and magnesium ions. The second is water that has been influenced by the effects of fertilizers and other anthropogenic activities in the area. Mineral speciation and silicate mineral stability diagrams suggest that montmorillonite, probably derived from the incongruent dissolution of feldspars and micas, is the most stable silicate phase in the groundwaters. The apparent incongruent weathering of silicate minerals in the groundwater system has led to the enrichment of sodium, calcium, magnesium and bicarbonate ions as well as silica, leading to the supersaturation of calcite, aragonite, dolomite and quartz. Stability in the montmorillonite field suggests restricted flow conditions and a long groundwater residence time, leading to greater exposure of the rock to weathering. Cation exchange processes appear to play minor roles in the hydrochemistry of groundwater.

Journal of Environmental Hydrology↗

USGS2008

Canadian groundwater inventory: Regional hydrogeological characterization of the south-central part of the maritimes basin

The Maritimes Groundwater Initiative (MGWI) is a large, integrated, regional hydrogeological study focusing on a representative area of the Maritimes Basin in eastern Canada. The study area covers a land surface of 10 500 km 2 , of which 9 400 km 2 are underlain by sedimentary rocks. This sedimentary bedrock is composed of a sequence of discontinuous strata of highly variable hydraulic properties, and is generally overlain by a thin layer of glacial till(mostly 4-8 m thick, but can reach 20 m). Depending on the area, 46 to 100% of the population relieson groundwater for water supply, either from municipal wells or from private residential wells. The main objectives of this project were to improve the general understanding of groundwater-flow dynamics and to provide baseline information and tools for a regional groundwater-resource assessment. This bulletin presents the current state of understanding of this hydrogeological system, along with the methodology used to characterize and analyze its distinct behaviour at three different scales. This regional bedrock aquifer system contains confined and unconfined zones, and each of its lenticular permeable strata extends only a few kilometres. Preferential groundwater recharge occurs where sandy till is present. The mean annual recharge rate to the bedrock is estimated to range between 130 and 165 mm/a. Several geological formations of this basin provide good aquifers, with hydraulic conductivity in the range 5x10 -6 to 10 -4 m/s. Based on results of numerical flow modelling, faults were interpreted to have a key role in the regional flow. Pumping-test results revealed that the fractured aquifers can locally be very heterogeneous and anisotropic, but behave similarly to porous media. Work performed at the local scale indicated that most water-producing fractures seem to be subhorizontal and generally oriented in a northeasterly direction, in agreement with regional structures and pumping-test results. Almost all residential wells are shallow (about 20 m) open holes that are cased only through the surficial sediments.

Bulletin of the Geological Survey of Canada↗

USGS2013

Descriptions and characterizations of water-level data and groundwater flow for the Brewster Boulevard and Castle Hayne Aquifer Systems and the Tarawa Terrace Aquifer

This supplement of Chapter A (Supplement 3) summarizes results of analyses of groundwater-level data and describes corresponding elements of groundwater flow such as vertical hydraulic gradients useful for groundwater-flow model calibration. Field data as well as theoretical concepts indicate that potentiometric surfaces within the study area are shown to resemble to a large degree a subdued replica of surface topography. Consequently, precipitation that infiltrates to the water table flows laterally from highland to lowland areas and eventually discharges to streams such as Northeast and Wallace Creeks and New River. Vertically downward hydraulic gradients occur in highland areas resulting in the transfer of groundwater from shallow relatively unconfined aquifers to underlying confined or semi-confined aquifers. Conversely, in the vicinity of large streams such as Wallace and Frenchs Creeks, diffuse upward leakage occurs from underlying confined or semi-confined aquifers. Point water-level data indicating water-table altitudes, water-table altitudes estimated using a regression equation, and estimates of stream levels determined from a digital elevation model (DEM) and topographic maps were used to estimate a predevelopment water-table surface in the study area. Approximate flow lines along hydraulic gradients are shown on a predevelopment potentiometric surface map and extend from highland areas where potentiometric levels are greatest toward streams such as Wallace Creek and Northeast Creek. The distribution of potentiometric levels and corresponding groundwater-flow directions conform closely to related descriptions of the conceptual model.

North Carolina↗

USGS2013

Characterization and conceptualization of groundwater flow systems

This chapter discusses some of the fundamental concepts, data needs and approaches that aid in developing a general understanding of a groundwater system. Principles of the hydrological cycle are reviewed; the processes of recharge and discharge in aquifer systems; types of geological, hydrological and hydraulic data needed to describe the hydrogeological framework of an aquifer system; factors affecting the distribution of recharge to aquifers; and uses of groundwater chemistry, geochemical modelling, environmental tracers and age interpretations in groundwater studies. Together, these concepts and observations aid in developing a conceptualization of groundwater flow systems and provide input to the development of numerical models of a flow system. Conceptualization of the geology, hydrology, geochemistry, and hydrogeological and hydrochemical framework can be quite useful in planning, study design, guiding sampling campaigns, acquisition of new data and, ultimately, developing numerical models capable of assessing a wide variety of societal issues — for example, sustainability of groundwater resources in response to real or planned withdrawals from the system, CO 2 sequestration or other waste isolation issues (such as nuclear waste disposal).

Book chapter↗

USGS2010

Contamination of groundwater by the fumigants ethylene dibromide (EDB) and dibromochloropropane (DBCP) near McBee, South Carolina

McBee is a small town of about 700 people located in Chesterfield County, South Carolina, in the Sandhills region of the upper Coastal Plain. The halogenated organic compounds ethylene dibromide (EDB) and dibromochloropropane (DBCP) have been detected in several public and domestic supply and irrigation wells since 2002 at concentrations above their U.S. Environmental Protection Agency Maximum Contaminant Limits of 0.05 and 0.2 microgram per liter (µg/L), respectively. The source(s) and release histories of EDB and DBCP to local groundwater are unknown, but believed to be related to their historical use between the 1940s and their ban in the late 1970s as fumigants to control nematode damage in peach orchards. However, gasoline and jet-fuel supplies also contained EDB and are an alternative source of contamination to groundwater. The detection of EDB and DBCP in water wells has raised health concerns because groundwater is the sole source of water supply in the McBee area. In April 2010, forensic, geochemical-based investigation was initiated by the U.S. Geological Survey in cooperation with the Alligator Rural Water & Sewer Company to provide additional data regarding EDB and DBCP in local groundwater. The investigation includes an assessment of the use, release, and disposal history of EDB and DBCP in the area, the distribution of EDB and DBCP concentrations in the unsaturated zone, and transport and fate in groundwater.

South Carolina↗