Results for “Geologic Quadrangle” — Page 74

USGS2021

Geologic map of the Middendorf quadrangle, Chesterfield County, South Carolina

The Middendorf 7.5-minute quadrangle is located entirely within the Carolina Sandhills region of the upper Atlantic Coastal Plain province in Chesterfield County, South Carolina. The Carolina Sandhills, which has been recognized as a separate region for a long time (e.g., McGee, 1890, 1891; Holmes, 1893), extends from central North Carolina across South Carolina to the western border of Georgia along the updip (inland) margin of the Atlantic Coastal Plain province. In Chesterfield County, the Carolina Sandhills form a relatively high plateau that is bounded to the west by Paleozoic metamorphic rocks of the Piedmont province. This plateau is bounded to the east by the east-facing Orangeburg Scarp, which is interpreted as a shoreline formed by wave erosion during a middle Pliocene time of high sea level (Dowsett and Cronin, 1990). Digital Elevation Models (DEMs) of the Middendorf quadrangle derived from lidar point cloud data reveal a landscape incised by creeks and streams. The highest elevation in the Middendorf quadrangle is 596 ft (182 m) on top of a sandhill in the northwest quadrant of the quadrangle, whereas the lowest elevation is 230 ft (70 m) in the floodplain of Big Black Creek on the southern margin of the quadrangle. Most of the landscape is covered by a mantle of unconsolidated sand that is mapped as the Quaternary Pinehurst Formation. At many locations, the unconsolidated sand is <2 m thick and forms a sand sheet of low relief. In areas of higher elevation, however, the unconsolidated sand can be up to 10 m thick and forms subdued hills (degraded dunes) of up to 6 m relief with steeper sides on the east and southeast. Many of these subdued hills (degraded dunes) are present in the area of closed depressions in the southwest corner of the map. Outcrops within the quadrangle are not common, and are limited mostly to a few exposures of sandstone and clay of the Cretaceous Middendorf Formation in a few road cuts, railroad cuts, and borrow pits as well as some slopes and roadside ditches.

South Carolina↗

USGS2002

Geologic map of the Dillon quadrangle, Summit and Grand Counties, Colorado

New 1:24,000-scale geologic mapping along the Interstate-70 urban corridor in western Colorado, in support of the USGS Central Region State/USGS Cooperative Geologic Mapping Project, is contributing to a more complete understanding of the stratigraphy, structure, tectonic evolution, and hazard potential of this rapidly developing region. The 1:24,000-scale Dillon quadrangle is near the headwaters of the Blue River and straddles features of the Blue River graben (Kellogg, 1999), part of the northernmost reaches of the Rio Grande rift, a major late Oligocene to recent zone of extension that extends from Colorado to Mexico. The Williams Range thrust fault, the western structural margin of the Colorado Front Range, cuts through the center of the quadrangle, although is mostly covered by surficial deposits. The oldest rocks in the quadrangle underlie the Williams Fork Mountains and the ridge immediately east of South Fork Middle Fork River, and include biotite-sillimanite schist and gneiss, amphibolite, and migmatite that are intruded by granite inferred to be part of the 1,667-1,750 Ma Routt Plutonic Suite (Tweto, 1987). The oldest exposed sedimentary unit is the Upper Jurassic Morrison Formation, but Pennsylvanian Maroon Formation, a sequence of red sandstone, conglomerate, and interbedded shale, underlies the southern part of the quadrangle. The thickest sequence of sedimentary rocks is Cretaceous in age and includes at least 500 m of the Upper Cretaceous Pierre Shale. Surficial deposits include (1) an old, deeply dissected landslide deposit, possibly as old as Pliocene, on the west flank of the Williams Fork Mountains, (2) deeply weathered, very coarse gravel deposits underlying a mesa in the southwest part of the quadrangle (the Mesa Cortina subdivision. The gravels are gold bearing and were mined by hydraulic methods in the 1800s), (3) moderately to deeply weathered, widespread, bouldery material that is a combination of till of the Bull Lake glaciation, debris-flow deposits, landslide deposits, and possibly pre-Bull Lake till, (4) glacial deposits of both Bull Lake (middle Pleistocene) and Pinedale (late Pleistocene)glaciations, (5) recent landslide deposits, and (6)extensive colluvial and alluvial deposits.

Miscellaneous Field Studies Map↗

USGS1997

Geologic map of the Dillon quadrangle, Summit and Grand Counties, Colorado

New 1:24,000-scale geologic mapping along the Interstate-70 urban corridor in western Colorado, in support of the USGS Central Region State/USGS Cooperative Geologic Mapping Project, is contributing to a more complete understanding of the stratigraphy, structure, tectonic evolution, and hazard potential of this rapidly developing region. The 1:24,000-scale Dillon quadrangle is near the headwaters of the Blue River and straddles features of the Blue River graben (Kellogg, 1999), part of the northernmost reaches of the Rio Grande rift, a major late Oligocene to recent zone of extension that extends from Colorado to Mexico. The Williams Range thrust fault, the western structural margin of the Colorado Front Range, cuts through the center of the quadrangle, although is mostly covered by surficial deposits. The oldest rocks in the quadrangle underlie the Williams Fork Mountains and the ridge immediately east of South Fork Middle Fork River, and include biotite-sillimanite schist and gneiss, amphibolite, and migmatite that are intruded by granite inferred to be part of the 1,667-1,750 Ma Routt Plutonic Suite (Tweto, 1987). The oldest exposed sedimentary unit is the Upper Jurassic Morrison Formation, but Pennsylvanian Maroon Formation, a sequence of red sandstone, conglomerate, and interbedded shale, underlies the southern part of the quadrangle. The thickest sequence of sedimentary rocks is Cretaceous in age and includes at least 500 m of the Upper Cretaceous Pierre Shale. Surficial deposits include (1) an old, deeply dissected landslide deposit, possibly as old as Pliocene, on the west flank of the Williams Fork Mountains, (2) deeply weathered, very coarse gravel deposits underlying a mesa in the southwest part of the quadrangle (the Mesa Cortina subdivision. The gravels are gold bearing and were mined by hydraulic methods in the 1800s), (3) moderately to deeply weathered, widespread, bouldery material that is a combination of till of the Bull Lake glaciation, debris-flow deposits, landslide deposits, and possibly pre-Bull Lake till, (4) glacial deposits of both Bull Lake (middle Pleistocene) and Pinedale (late Pleistocene)glaciations, (5) recent landslide deposits, and (6)extensive colluvial and alluvial deposits.

Colorado↗

USGS1989

Bedrock geology of the Bristol quadrangle, Hartford, Litchfield, and New Haven Counties, Connecticut

Metamorphosed strata of sedimentary origin underlie the upland surface of western Connecticut, and nonmetamorphosed sedimentary strata underlie the adjacent lowland surface of central Connecticut. The metamorphic rocks consist chiefly of micaceous schists and gneisses, with minor amounts of pegmatite, amphibolite, and metaquartzite. These rocks represent three formations. They are, in order of decreasing age, the Taine Mountain Formation, Collinsville Formation, and Straits Schist Formation; together they comprise seven members. The formations probably correlate with the Moretown Formation, Hawley Formation, and Goshen Formation of central western Massachusetts, and Vermont. The originally nonmetamorphosed sediments of the formations thus are inferred to range in geologic age from Middle Ordovician to Late Silurian and Early Devonian. Regional metamorphism of the strata may have occurred during the Acadian orogeny at or near the end of Early Devonian time. The nonmetamorphosed strata of the lowland are mainly sandstone; they are correlated with the New Haven Arkose of Middle Triassic age in central Connecticut. Gravimeter traverses across the upland-lowland boundary suggest the presence of a normal fault of a few hundred feet displacement, downthrown on the east. Traces of copper mineralization are found locally in the vicinity of the boundary, and at least one mine produced copper ore during the 1800's. Jointing and foliation planes in the metamorphic rocks may affect slope stability and the ease of excavation. The sedimentary strata are inclined, commonly massive, and poorly exposed.

Connecticut↗

USGS2007

Geologic Map of the Big Delta B-1 Quadrangle, East-Central Alaska

Geologic mapping and U-Pb age dating of rocks from the Big Delta B-1 quadrangle, east-central Alaska, have yielded new insights into the geology and gold mineral resource for the headwater region of the Goodpaster River, northeast of Delta, Alaska. The area lies within the Yukon-Tanana Upland and is underlain by Paleozoic and Cretaceous crystalline bedrock and contains several gold mines and prospects. The Paleozoic units include biotite gneiss, quartzite interlayered with metapelite, and amphibolite gneiss. The Paleozoic units were intruded during the Devonian by tonalitic to granitic plutons, which, as a result of regional Mesozoic metamorphism and tectonism, are now augen gneiss and biotite orthogneiss. The Mesozoic regional metamorphism and ductile deformation of the entire Yukon-Tanana Upland culminated by the Late Cretaceous (about 116 Ma) as a result of northwest-directed regional transpression along the southern margin of the North American craton. This dynamothermal episode was followed by invasion of syn- to post-tectonic granodioritic to granitic batholiths during the Late Cretaceous (about 113-107 Ma), followed by a pulse of 100-95 Ma quartz feldspar porphyry intrusions. Gold mineralization is spatially associated with various post-tectonic Late Cretaceous granitic dikes and batholiths throughout the quadrangle. A northeast-trending structural corridor, described herein as the Black Mountain tectonic zone, both controlled the emplacement of some of the Cretaceous intrusive rocks, gold deposits, and prospects, as well as formed a deep-seated crustal conduit along which a subsequent rhyolite flow-dome complex erupted during the Paleocene. Tertiary uplift and erosion resulted in the development of extensive erosional pediments. Quaternary alpine glaciation carved beautiful, broad valleys in the eastern part of the quadrangle, leaving behind terminal moraines in the headwater region of the Goodpaster river drainage. Continued Holocene to Recent deformation along the Black Mountain tectonic zone has offset Tertiary terraces, as well as Quaternary fluvial and alluvial deposits, indicating that the area has a long, complex, and ongoing tectonic history.

Scientific Investigations Map↗

USGS2002

Factors related to well yield in the fractured-bedrock aquifer of New Hampshire

The New Hampshire Bedrock Aquifer Assessment was designed to provide information that can be used by communities, industry, professional consultants, and other interests to evaluate the ground-water development potential of the fractured-bedrock aquifer in the State. The assessment was done at statewide, regional, and well field scales to identify relations that potentially could increase the success in locating high-yield water supplies in the fractured-bedrock aquifer. statewide, data were collected for well construction and yield information, bedrock lithology, surficial geology, lineaments, topography, and various derivatives of these basic data sets. Regionally, geologic, fracture, and lineament data were collected for the Pinardville and Windham quadrangles in New Hampshire. The regional scale of the study examined the degree to which predictive well-yield relations, developed as part of the statewide reconnaissance investigation, could be improved by use of quadrangle-scale geologic mapping. Beginning in 1984, water-well contractors in the State were required to report detailed information on newly constructed wells to the New Hampshire Department of Environmental Services (NHDES). The reports contain basic data on well construction, including six characteristics used in this study?well yield, well depth, well use, method of construction, date drilled, and depth to bedrock (or length of casing). The NHDES has determined accurate georeferenced locations for more than 20,000 wells reported since 1984. The availability of this large data set provided an opportunity for a statistical analysis of bedrock-well yields. Well yields in the database ranged from zero to greater than 500 gallons per minute (gal/min). Multivariate regression was used as the primary statistical method of analysis because it is the most efficient tool for predicting a single variable with many potentially independent variables. The dependent variable that was explored in this study was the natural logarithm (ln) of the reported well yield. One complication with using well yield as a dependent variable is that yield also is a function of demand. An innovative statistical technique that involves the use of instrumental variables was implemented to compensate for the effect of demand on well yield. Results of the multivariate-regression model show that a variety of factors are either positively or negatively related to well yields. Using instrumental variables, well depth is positively related to total well yield. Other factors that were found to be positively related to well yield include (1) distance to the nearest waterbody; (2) size of the drainage area upgradient of a well; (3) well location in swales or valley bottoms in the Massabesic Gneiss Complex and Breakfast Hill Granite; (4) well proximity to lineaments, identified using high-altitude (1:80,000-scale) aerial photography, which are correlated with the primary fracture direction (regional analysis); (5) use of a cable tool rig for well drilling; and (6) wells drilled for commercial or public supply. Factors negatively related to well yields include sites underlain by foliated plutons, sites on steep slopes sites at high elevations, and sites on hilltops. Additionally, seven detailed geologic map units, identified during the detailed geologic mapping of the Pinardville and Windham quadrangles, were found to be positively or negatively related to well yields. Twenty-four geologic map units, depicted on the Bedrock Geologic Map of New Hampshire, also were found to be positively or negatively related to well yields. Maps or geographic information system (GIS) data sets identifying areas of various yield probabilities clearly display model results. Probability criteria developed in this investigation can be used to select areas where other techniques, such as geophysical techniques, can be applied to more closely identify potential drilling sites for high-yielding

Professional Paper↗

USGS2003

Geologic map of the Bobs Flat Quadrangle, Eureka County, Nevada

Map Scale: 1 :24,000 Map Type: colored geologic map A 1 :24,000-scale, full-color geologic map of the Bobs Flat Quadrangle in Eureka County with one cross section and descriptions of 28 geologic units. Accompanying text describes the geologic history and structural geology of the quadrangle .

Report↗

USGS2005

Geologic map of the Ikpikpuk River quadrangle, Alaska

This map is a product of the USGS Digital Geologic Maps of Northern Alaska project, which captures in digital format quadrangles across the entire width of northern Alaska. Sources include geologic maps previously published in hardcopy format and recent updates and revisions based on field mapping by the Alaska Department of Natural Resources, Division of Geological and Geophysical Surveys and Division of Oil and Gas, and the U.S. Geological Survey. Individual quadrangles are digitized at either 1:125,000 or 1:250,000 depending on the resolution of source maps. The project objective is to produce a set of digital geologic maps with uniform stratigraphic nomenclature and structural annotation, and publish those maps electronically. The paper version of this map is available for purchase from the USGS Store.

Alaska↗

USGS2006

Geologic map of the Lookout Ridge quadrangle, Alaska

This map is a product of the USGS Digital Geologic Maps of Northern Alaska project, which captures in digital format quadrangles across the entire width of northern Alaska. Sources include geologic maps previously published in hardcopy format and recent updates and revisions based on field mapping by the Alaska Department of Natural Resources, Division of Geological and Geophysical Surveys and Division of Oil and Gas, and the U.S. Geological Survey. Individual quadrangles are digitized at either 1:125,000 or 1:250,000 depending on the resolution of source maps. The project objective is to produce a set of digital geologic maps with uniform stratigraphic nomenclature and structural annotation, and publish those maps electronically. The paper version of this map is available for purchase from the USGS Store.

Alaska↗

USGS2006

Geologic map of the Utukok River quadrangle, Alaska

This map is a product of the USGS Digital Geologic Maps of Northern Alaska project, which captures in digital format quadrangles across the entire width of northern Alaska. Sources include geologic maps previously published in hardcopy format and recent updates and revisions based on field mapping by the Alaska Department of Natural Resources, Division of Geological and Geophysical Surveys and Division of Oil and Gas, and the U.S. Geological Survey. Individual quadrangles are digitized at either 1:125,000 or 1:250,000 depending on the resolution of source maps. The project objective is to produce a set of digital geologic maps with uniform stratigraphic nomenclature and structural annotation, and publish those maps electronically.

Alaska↗

USGS2008

Geologic map of the Point Lay quadrangle, Alaska

This map is a product of the USGS Digital Geologic Maps of Northern Alaska project, which captures in digital format quadrangles across the entire width of northern Alaska. Sources include geologic maps previously published in hardcopy format and recent updates and revisions based on field mapping by the Alaska Department of Natural Resources, Division of Geological and Geophysical Surveys and Division of Oil and Gas, and the U.S. Geological Survey. Individual quadrangles are digitized at either 1:125,000 or 1:250,000 depending on the resolution of source maps. The project objective is to produce a set of digital geologic maps with uniform stratigraphic nomenclature and structural annotation, and publish those maps electronically. The paper version of this map is available for purchase from the USGS Store.

Alaska↗

USGS1973