USGS Science⌕ Search

SEARCH · USGS Science

Results for “Climate of the Past”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,687 records · Page 74Linked to original sources
USGS2024

Framework for implementing damping scaling factors in U.S. Geological Survey National Seismic Hazard Models

Traditionally, probabilistic seismic hazard analysis (PSHA) has focused on calculating ground motion hazard curves for elastic, 5%-damped pseudo spectral accelerations, Sa(T,5%), which are used as the basis for engineering design parameters and targets for ground motion selection and modification. However, structures and geotechnical systems can exhibit a wide range of damping ratios both above and below the 5% level, depending on the construction material, structural system, nonstructural elements, or subsurface soil properties. When spectral parameters at such damping levels are required for certain applications, 5%-damped accelerations have traditionally been extracted from PSHA-based hazard curves and adjusted outside of the hazard integral using damping scaling factors (DSF) such as those from Newmark & Hall (1982). Recent advances in the development of more rigorous and comprehensive damping scaling models (e.g., Rezaeian et al., 2014; Rezaeian et al., 2021) have allowed for the modeling of means and standard deviations of DSFs as functions of earthquake source and path properties for crustal, intraslab, and subduction interface tectonic environments. These DSF models can be applied to ground motion model (GMM) estimates of Sa(T,5%) for a given earthquake rupture scenario to produce a corresponding mean and standard deviation Sa at a specified damping ratio β, Sa(T,β). In this study, the DSF models of Rezaeian et al. (2014) and Rezaeian et al. (2021) are implemented within the U.S. Geological Survey National Seismic Hazard Model (NSHM) PSHA framework to calculate probabilistic hazard curves for spectral accelerations at damping ratios from 0.5% to 30%. The DSF models are applied directly to the mean and standard deviation of Sa(T,5%) predictions from each GMM in the NSHM logic tree. Resulting hazard curves and uniform hazard and risk spectra for Sa(T,β) are presented for several geographic locations and compared with corresponding spectra estimated using current design practices by applying the same DSFs outside of the PSHA calculation. Key differences between the two methods for estimating Sa(T,β) are discussed, and potential strategies are presented for the implementation and usage of the hazard-consistent Sa(T,β) in building codes. Comparing the results to those from DSFs used in current design practices that are mainly based on Newmark & Hall (1982) is not explored in this study.

Conference Paper↗
USGS2026

Regional models for postfire debris-flow likelihood and rainfall thresholds across the western United States

The U.S. Geological Survey (USGS) uses an empirical model developed with logistic regression (the ‘M1’ model) to rapidly assess debris-flow likelihood and to identify quantitative rainfall thresholds for debris flows after wildfire in the western United States. The M1 model was calibrated to a debris-flow inventory from southern California (United States) and has been applied throughout the western United States. Limited spatial coverage in the calibration dataset has motivated evaluation of M1 model accuracy outside the calibration region (e.g., the Sierra Nevada or the eastern Cascade Range, United States). Previous test cases showed that M1 overpredicts debris-flow likelihood and underpredicts rainfall thresholds for some locations (e.g., Arizona, northern California, Colorado, New Mexico, United States). We sought to improve the regional applicability of a debris-flow likelihood model by expanding the debris-flow inventory used for calibration, testing multiple potential models and generating an updated model framework. The updated inventory includes 3788 observations from 67 burned areas paired with short duration rainfall ratios. The updated model framework consists of a modified model structure and sets of coefficients calibrated separately to the entire updated inventory and to subsets of the inventory that intersect three Environmental Protection Agency (EPA) Level 2 ecoregions (Mediterranean California, Upper Gila Mountains and Western Cordillera). Comparisons of predictions from the updated models with observed rainfall and debris-flow activity show that the updated models outperform the M1 model by ~15%–60% and improve the uniformity of predictive performance across the western United States. The updated models also reduce false positive rates relative to M1 and generate rainfall thresholds that are better aligned with relative differences in regional climatology and debris-flow activity.

Arizona, California, Colorado, Idaho, Montana, Nev↗
USGS1993

Ground-water quality near an inactive landfill and sludge-spreading area, Tallahassee, Florida

Ground-water quality of a 120-acre area encompassing an inactive landfill southwest of Tallahassee, Florida, was assessed by installing and sampling 21 monitoring wells. Sludge from a municipal sewage-treatment plant was also applied to the land surface near the landfill site. Water samples were collected from the 21 monitoring wells from June 1987 through September 1990 and analyzed for concentrations of major ions, nitrogen species, trace metals, field measurements, and more than 140 organic constituents. Water quality in the Upper Floridan aquifer at the study site was compared to background water quality in other areas of Leon County. Ground-water quality of the study site was evaluated by the location of wells sampled in relation to the landfill and the sludge-spreading areas. Results of nonparametric statistical analysis indicated that potassium and nitrite plus nitrate as nitrogen concentrations in water samples from wells completed in the Upper Floridan aquifer at the study site were significantly different at the 5 percent probability level from those in samples from background wells completed in this aquifer in Leon County. Median potassium concentrations were 0.4 mg/L (milligrams per liter) in water from wells at the study site and 0.7 mg/L in water from background wells in Leon County. Median nitrite plus nitrate concentrations were 6.48 mg/L in water samples from wells at the study site and 0.51 mg/L in water samples from background wells. Graphical comparison of the water quality characteristics in water from six categories of wells; upgradient, landfill, adjacent to the landfill, downgradient onsite, downgradient offsite, and background Leon County, indicated that sodium, bicarbonate, sulfate, iron, manganese, and dissolved solids concentrations and specific conductance values were highest within the landfill. Upgradient and downgradient well categories include wells in areas affected by sludge spreading. Localized reducing conditions were indicated in a downgradient area by median iron concentrations of 930 and 30 ug/L (micrograms per liter) in samples from wells only 5 feet apart. Nitrite plus nitrate concentrations were lowest in water from wells in the landfill compared to water from the other categories. Concentrations of most trace elements and organic compounds were mostly below detection limits, although State maximum contaminant levels of 1 ug/L for benzene and vinyl chloride and 3 ug/L for tetrachloroethene were exceeded in 14 samples. Concentrations of sodium, potassium, chloride, sulfate, nitrite plus nitrate, total organic and ammonia nitrogen, and ammonia nitrogen in ground water were statistically analyzed in areas affected by sludge-spreading and other areas. Only nitrite plus nitrate and chloride concentrations were significantly different between the two areas. Median nitrite plus nitrate and chloride concentrations in sludge-spreading areas were 6.9 mg/L and 2.9 mg/L, respectively, compared to 1.1 mg/L and 1.8 mg/L in other areas.

Florida↗
USGS2025

Seamless Geologic Map Database for the Intermountain West, United States: A foundational dataset for mineral systems analysis

The Intermountain West has a complex geologic history, resulting in the formation of a diverse array of mineral deposits. Effective mineral exploration requires understanding the spatial and temporal relationships among geologic processes and events, a key focus of the mineral systems approach to exploration. This paper presents the Intermountain West Seamless Geologic Map Database, a unified dataset designed to support mineral exploration. Integrating geologic provinces, structural settings, and hydrothermal alteration, the database leverages the Seamless Integrated Geologic Mapping (SIGMa) extension to the USGS Geologic Map Schema (GeMS) to standardize geologic data from varied sources. SIGMa's hierarchical stratigraphic organization and feature-level metadata enhance data interoperability and reusability, enabling seamless query, analysis, and visualization of lithology, structural features, mineral deposits, geochronology, hydrothermal alteration. volcanic activity, and By providing a regionally consistent and dynamically evolving geologic map, this database provides a foundational framework for mineral exploration and geologic research. It also allows for an efficient workflow that expedites the publication of integrated geologic map databases.

Conference Paper↗
USGS2024

Automated, near real-time ground-motion processing at the U.S. Geological Survey

We describe automated ground‐motion processing software named gmprocess that has been developed at the U.S. Geological Survey (USGS) in support of near‐real‐time earthquake hazard products. Because of the open‐source development process, this software has benefitted from the involvement and contributions of a broad community and has been used for a wider range of applications than was initially envisioned. Here, we give an overview and introduction to the software, including how it has leveraged other open‐source libraries. We highlight some key features that gmprocess provides, compare response spectra calculated with the automated processing approach of gmprocess to the response spectra provided by the Next Generation Attenuation projects, and summarize projects that have utilized gmprocess. These use‐cases demonstrate that this software development effort has been successfully leveraged in earthquake research activities both within and outside the USGS.

Seismological Research Letters↗
USGS2026

Microplastics undergo fragmentation during pressurized membrane filtration

Low-micrometer microplastics (<10 μm) have been detected in drinking water, driving growing interest in using pressure-driven membrane filtration to remove these particles and ensure drinking water safety. However, little attention is paid to the fate of microplastics concentrated in the filtration byproduct. In this study, using well-defined polystyrene (PS) and poly(methyl methacrylate) microspheres as model particles, we observed microplastic fragmentation during nanofiltration and the subsequent release of smaller fragments. After operating for 3 h at 20 bar, 67.9 ± 8.0% of the PS spheres in the concentrate, based on particles counted in selected fields of view, were transformed into fractured particles. The characteristic Raman band signals of microplastics were significantly weakened after fragmentation, leading to detection challenges. To address this, a data processing algorithm was developed to identify PS fragments as small as 1 μm. Preliminary statistical analysis reveals that within the tested pressure range, operation time has a stronger influence on fragmentation than pressure magnitude alone and that fragmentation is further governed by the intrinsic mechanical properties of the tested model polymers. This work provides direct evidence that pressure-driven membrane processes induce microplastic fragmentation and highlights the environmental risks associated with the discharge of fragmented microplastics into the concentrate.

Environmental Science & Technology Letters↗
USGS2025

Cascading land surface hazards as a nexus in the Earth system

Earth’s surface is sculpted by numerous processes that move sediment, ranging from gradual and benign to abrupt and catastrophic. Although infrequent, high-magnitude sediment mobilization events can be hazardous to people and infrastructure, leaving topographic imprints on the landscape and remarkable narratives in the historical record. Hazardous events such as fires, storms, and earthquakes accelerate erosion and sediment transport, increasing landscape sensitivity to subsequent perturbations, thus forming a cascading hazard. Although the redistribution of sediment across Earth’s landscape can result in higher risks to vulnerable populations, cascading processes are commonly unaccounted for in hazard assessments. Cascading hazards can occur almost immediately after triggering events, such as coseismic landslides, or over months, years, or even decades after an initial perturbation, such as debris flows after wildfires or flooding in channels alluviated by volcanic debris. Sediment cascades span Earth’s surface, from mountaintops to river valleys, where erosion, deposition, and aggradation can lead to a myriad of hazardous processes, including decreased river conveyance capacity, which increases the likelihood of downstream flooding. An improved understanding of the magnitude, frequency, and persistence of cascading hazards is critical given the rapid changes in the frequency and severity of storms, fires, sea-level change, and cryospheric melting, as well as the expansion of high-population-density urban footprints in regions susceptible to solid Earth hazards. Understanding the full consequences and underlying physics of Earth’s cascading land surface hazards can help minimize future human and economic losses.

California↗
USGS2024

Effective site coefficients for the 2024 International Building Code (IBC)

The U.S. National Seismic Hazard Models (NSHMs), developed by the U.S. Geological Survey (USGS), have long been the scientific foundation of seismic design guidelines and have been used to compute design ground motions for construction of new buildings and retrofit of existing buildings in the United States and its territories. The 2018 NSHM is adopted by the 2024 International Building Code (IBC). Prior to the 2018 NSHM update, hazard calculations were required only at one reference site condition defined by V S30 =760 m/s (where V S30 is the time-averaged shear wave velocity from the surface to a depth of 30 m) and three periods (peak ground acceleration, PGA, and pseudo spectral accelerations at periods of 0.2 and 1 s, S s and S 1 ). Site coefficients, F PGA , F a , and F v , were then defined by the Building Seismic Safety Council (BSSC) Provisions Update Committee (PUC) in the site-specific procedures of National Earthquake Hazard Reduction Program (NEHRP) Recommended Seismic Provisions to calculate ground motions for other site classes with different V S30 values at the given periods. The design ground motions at other periods were then estimated using a generic spectral shape that was also defined by the BSSC PUC in NEHRP provisions. In recent years, the engineering community has realized there were deficiencies with the F a and F v site coefficients and the generic spectral shape. To avoid potentially dangerous underestimations of design ground motions for long period structures on soft site conditions in high seismicity regions, the BSSC PUC recommended the use of multi-period response spectra (MPRS) in 2017. As a result, the USGS produced multi-period and multi-V S30 response spectral values in the 2018 NSHM for calculations of design ground motions and the site coefficients F a and F v were eliminated from the 2020 NEHRP Provisions. As these site coefficients were widely used inside and outside of the United States, in this study we back-calculate the “effective” site coefficients F a,eff , and F v,eff by comparing MPRS for various site classes with the MPRS for the reference site condition, and discuss the changes that are observed in the 2024 IBC compared to its previous version in 2021. The effective site coefficients are presented for test site locations and their dependence on various factors including period, ground motion intensity, and regional models are discussed. Ratio maps between the new effective site coefficients and the old ones are then presented for soft site classes and for short and long periods. For soft site classes at short periods, the new effective site coefficients are lower than the old site coefficients for high seismicity regions and higher for low seismicity regions. As it was expected, for soft site classes at long periods and high seismicity regions, the new effective site coefficients are much larger than the old site coefficients without imposing the 50% increase as a penalty that was suggested in the 2021 IBC, whereas they could be much smaller if the 50% increase would have been imposed particularly around New Madrid and Charleston high seismicity regions. For low seismicity regions, the long period effective site coefficients can be smaller or larger by 20% compared to the 2021 IBC coefficients.

Conference Paper↗
USGS2026

Potential impacts of groundwater pumping on stream temperature are greatest in streams with substantial cold groundwater inflows

Groundwater pumping-induced reductions in streamflow (known as ‘streamflow depletion’) have been documented worldwide, but potential impacts of streamflow depletion on stream temperature are not well understood. Here, we use two types of models to identify potential impacts of pumping on stream temperature across the conterminous United States (CONUS) to determine which aspects of a stream's annual thermograph (thermal signatures) can be used to monitor and manage streamflow depletion impacts on stream temperature. We used long-term streamflow and stream temperature data from 30 streamgages across CONUS and surrogate models of streamflow depletion to analyse potential stream temperature impacts at each site. We compared two different stream temperature modelling approaches: (i) a process-based energy balance model and (ii) statistical regression models based on air temperature and stream discharge. We calculated a suite of thermal signatures under depleted and non-depleted conditions for each stream and found that maximum annual 7-day temperature and annual temperature range are potentially the most sensitive to streamflow depletion, with potential changes of at least 2°C at > 70% of the sites when using the process-based model. We also found that the regression-based models predicted much less sensitivity of stream temperature to streamflow depletion than the process-based model. This work provides an initial evaluation and sensitivity analysis of the potential impacts of streamflow depletion on stream temperature. We demonstrate that stream temperature may be most sensitive to pumping in streams with a high proportion of flow sourced from relatively cold groundwater inputs, and that regression-based stream temperature models may underpredict stream temperature changes caused by streamflow depletion.

conterminous United States↗
USGS2026

Egg thiamine concentrations reflect dietary differences between four hatchery strains, including two morphotypes, of Lake Trout in Lake Ontario

Objective Test whether dietary differences among hatchery strains of Lake Trout Salvelinus namaycush were associated with variation in egg thiamine concentrations and assess the potential for using strain-specific traits to mitigate thiamine deficiency complex (TDC) in Lake Ontario restoration efforts. Methods Stomach content analysis and stable isotope mixing models were used to compare diets among four hatchery strains of Lake Trout, representing lean and humper morphotypes. Egg thiamine concentrations were measured to test whether dietary differences correlated with susceptibility to TDC. Results Significant differences in diet and egg thiamine concentrations were observed among Lake Trout strains. A humper-like morphotype strain exhibited elevated thiamine levels, which were associated with reduced consumption of prey known to degrade thiamine levels when consumed, Alewife Alosa pseudoharengus and Rainbow Smelt Osmerus mordax , and increased reliance on Round Goby Neogobius melanostomus or sculpin species (Slimy Sculpin Cottus cognatus and Deepwater Sculpin Myoxocephalus thompsonii ). These findings support the link between the consumption of Alewife and Rainbow Smelt and thiamine deficiency. Conclusions Our findings support a link between strain-specific dietary preferences and susceptibility to TDC in Lake Trout. Preferential stocking of strains less prone to TDC, such as the strain derived from a humper morph from Lake Superior, could enhance restoration success in Lake Ontario. This strategy may be especially effective given the continued dominance of Alewife in the lake's prey base and the current management priorities supporting fisheries for Pacific salmon Oncorhynchus spp.

North American Journal of Fisheries Management↗
USGS1991

Wetland sedimentation and vegetation patterns near selected highway crossings in West Tennessee

Wetland sedimentation and vegetation patterns at 11 highway crossings in West Tennessee were studied from 1987 to 1989. The purpose of the study was to investigate potential adverse effects of highway crossings on wetlands. Sedimentation rates, determined from root-burial depths, were highly variable. Average rates offine-grained deposition ranged from 0.005 to 0.033 foot per year for stations in locally ponded areas and from -0.002 to 0.039 foot per year for stations in drained areas. Sedimentation rates upstream from highway crossings were not significantly different from downstream rates at 8 of the 11 study sites. Three study sites had significantly greater sedimentation rates downstream. Sand splays were observed downstream from bridges at most study sites. Vegetation patterns and tree growth appear most strongly related to hydropetiod, defined as the average length of time an area is covered by water each year. The influence of sedimentation on tree growth is difficult to separate from the influence of hydroperiod because areas with high sedimentation rates typically have long hydroperiods. Estimated hydroperiod increased no more than 1 percent because of backwater from the highway crossings at the 11 study sites, while the estimated average depth of flood-plain inundation increased by an average of 6 percent.

Tennessee↗
USGS2026

Lunar analog study using portable gamma-ray neutron detector: Radiochemical mapping of silicic-to-basaltic volcanic terrains in the San Francisco Volcanic Field, Arizona

Studying lunar silicic volcanism provides key insights into the Moon’s crustal evolution, magmatic processes, and volcanic history. The Lunar-VISE (Lunar Vulkan Imaging and Spectroscopy Explorer) mission will investigate the Gruithuisen domes, a unique lunar region hypothesized to have formed through silicic volcanism. Using instruments on a Firefly Aerospace lander and a Honeybee Robotics rover, Lunar-VISE will analyze mineralogy, geochemistry, and surface properties to determine the origin and evolution of the domes, with a gamma-ray and neutron spectrometer (LV-GRNS) among its payload instruments. In preparation for this mission, we conducted preliminary fieldwork using a handheld gamma-ray neutron detector with NaI(Tl) and Cs LiYCl :Ce (CLYC) scintillators. This study focuses on various rhyolitic and basaltic volcanic centers in the San Francisco Volcanic Field (SFVF) near Flagstaff, Arizona—specifically Sugarloaf Peak, Bonito Lava Flow, and Robinson Mountain, a region containing several well-characterized lunar analog sites. The SFVF was selected for this study due to its broad compositional diversity spanning basaltic to rhyolitic compositions, its well-preserved volcanic morphologies, and its extensive use in previous NASA field campaigns and astronaut training exercises, making it an ideal terrestrial laboratory for testing planetary exploration techniques. We measured natural radioactivity, specifically from potassium (K), thorium (Th), and uranium (U) and other elements in their decay chains, which serve as diagnostic tracers of magmatic differentiation and crustal evolution processes, to assess geochemical variability across compositionally diverse terrains. The detector’s sensitivity was assessed across varying concentration levels. Regionally averaged concentrations of radioisotopes were determined by gamma-ray spectroscopy at selected sites. Our measurements reveal significant compositional variations between sites, with Sugarloaf Peak (rhyolitic, silicic dome) exhibiting the highest average radioisotope concentrations (K: 3.29 ± 0.24 wt%, U: 14.35 ± 1.81 ppm, Th: 27.14 ± 2.43 ppm), while Bonito Lava Flow (K: 1.13 ± 0.08 wt%, U: 3.86 ± 0.52 ppm, Th: 7.52 ± 1.02 ppm), and Robinson Mountain (K: 1.46 ± 0.16 wt%, U: 5.59 ± 1.06 ppm, Th: 11.75 ± 1.98 ppm) show lower concentrations aligned with basaltic compositions. Gamma-ray fluxes were elevated by a factor of approximately three to four at Sugarloaf Peak relative to nearby basaltic terrains, consistent with expected geochemical differentiation patterns. Furthermore, at meter scales, proximity to geological features significantly affects measurements. Th concentrations adjacent to a cliff face at Sugarloaf’s base were 28% higher than values measured 3-5 meters away from the same feature, demonstrating localized compositional heterogeneity. Analysis of station-by-station measurements reveals that K, U, and Th concentrations show an elevation trend at Robinson Mountain and generally higher concentrations near Sugarloaf Peak’s summit, suggesting progressive magmatic differentiation and/or the presence of more evolved lithologies at higher elevations. By mapping these elements on Earth using GRNS, we aim to optimize measurement techniques for Lunar-VISE and similar rover-borne missions by demonstrating the applicability of portable GRNS instruments for planetary surface exploration in an analog environment.

Arizona↗
USGS2025

Preliminary depth to basement modeling at Salton Sea, California

The San Andreas Fault – Imperial Fault (SAF-IF) transtensional step-over zone along the southern margin of the Salton Sea hosts substantial geothermal production and lithium brine resources. Recent volcanism at the Salton Buttes and active seismicity along the SAFIF fault system highlight active tectonic and magmatic processes that pose natural hazards and may impact energy and mineral production. Characterizing the subsurface architecture and extent of concealed alteration associated with this tectono-magmatic system enhances understanding of these active processes, associated hazards, and resources. We have compiled a gravity database, consisting of new and re-processed existing data, from which we have constructed a new isostatic residual gravity anomaly map of the Salton trough. We have used this new gravity dataset together with a compilation of publicly available borehole data to develop new depth to basement inversion models for the region. These depth to basement models help to constrain basin geometries, inform alteration mapping, and reveal variations in basement rocks. Due to the concealed nature of the complex tectonic framework at the Salton trough, it is necessary to utilize geophysical methods for subsurface characterization. These new depth to basement models are a first step toward constructing 2D and 3D geophysical and geologic models of the Imperial Valley and Salton Sea geothermal area. This analysis complements other geophysical initiatives, including magnetotelluric (MT) modeling (Tokmakoff et al., 2024), magnetic mapping (Glen and Earney, 2023, 2024) and potential field modeling, and seismic studies focused on hazard and resource investigations in the Imperial Valley.

California↗
USGS2025

Land cover change within wetland complexes at Dixie Meadows, Churchill County, Nevada: 2015 – 2023

Dixie Meadows, Nevada, is a system of geothermal springs and seeps that feed a complex of marshes and wetland meadows that are located within lands managed by the Bureau of Land Management (BLM) and the Department of Defense (DOD). A previous U.S. Geological Survey report documented variability in satellite imagery-based land cover classifications for seven wetland complexes at near monthly time intervals between October 2015 and January 2022. This report presents additional data, extending analysis to November 2023. Land cover classifications between October 2015 and November 2023 demonstrated an association between vegetation cover characteristics and surface moisture, with Class 1 having dry, bare soil or sparse upland vegetation, Class 2 having moist, bare soil or sparse to small vegetation, Class 3 having dense green vegetation with potentially saturated soil conditions, Class 4 having a mix of shallow surface water, saturated soil, and dense green vegetation, and Class 5 having open surface water. Most of the wetland complexes occur close to spring outflows primarily within land managed by the DOD, though portions are also within BLM lands. The intervening and surrounding landscape outside of the wetland complexes assessed in this study are managed by the BLM. As a result, Class 1 land covers had the largest areal coverage for BLM managed lands. Classes 2 and 3 land covers were primarily mapped inside the wetland complexes and thus had the largest area coverage within DOD managed lands. Class 4 was almost exclusively mapped within the wetland complexes and thus was largely contained within DOD managed lands. Class 5 (open water) was exclusively mapped in and adjacent to a single wetland complex with catchment ponds on land managed by the BLM. The distribution of these land cover classes over the study period was seasonally and annually variable. Land cover areas of Classes 1 and 2 were larger during the spring months. Conversely, land cover areas of Classes 3 and 4 tended to be greatest during the summer or fall. These patterns might be influenced by differences in seasonal water sources and phenology.

Nevada↗
USGS2024

On algorithmically determined versus traditional macroseismic intensity assignments

The utility of macroseismic data, defined as the effects of earthquakes on humans and the built environment, has been increasingly recognized following the advent of online systems that now produce unprecedented volumes of macroseismic intensity information. Contributed reports from the U.S. Geological Survey “Did You Feel It?” (DYFI) system ( Wald et al ., 1999 ) are used to generate intensity values with an algorithm based on seminal work by Dengler and Dewey (1998) . The algorithm was developed initially to reproduce intensity values assigned by expert opinion using questionnaire results collected by telephone survey. In this article, I discuss reasons why intensity values from (self‐selected) DYFI responses can differ from values that would be assigned by expert opinion given more complete data from randomly selected participants. For example, with the data used by Dengler and Dewey (1998) , intensities near 4 could be determined from the percentage of people who felt shaking in each town. With less spatially rich data from self‐selected participants, this percentage often cannot be determined reliably. Audible noises are key additional diagnostic criteria for modified Mercalli intensity (MMI) 4, but, although the DYFI system includes a question about noise, following Dengler and Dewey (1998) , the DYFI algorithm does not include a noise indicator. At the upper end of the scale, as defined the DYFI algorithm yields a maximum intensity value of 9.05, nominally corresponding to peak ground acceleration of 75% g . These and other factors can result in DYFI values that are low compared to traditional MMI values assigned using expert opinion, even absent factors that can bias traditional MMI assignments. Modern ground‐motion intensity conversion equations determined using DYFI intensities are expected to be appropriate for DYFI intensities, but the results of this study suggest that biases may be introduced if DYFI and traditional intensities are assumed to be interchangeable.

Seismological Research Letters↗
USGS2026

Magnitude conversion relations create substantial differences in seismic hazard models

Earthquake catalogs are essential data inputs for seismic hazard modeling. Because earthquake magnitudes are reported in a variety of types (e.g., local magnitudes and moment magnitudes), magnitude conversion relationships must be used to convert the different magnitude types present in a catalog to a uniform magnitude type to avoid biases in the hazard computation. However, these conversion relationships are often uncertain and have been shown to sometimes perform poorly. Here, we investigate the sensitivity of the gridded seismicity component of the National Seismic Hazard Model (NSHM) to the catalog conversion equations in the Eastern United States. In the 2023 NSHM, magnitudes of various types were converted to moment magnitudes using equations developed by the Central and Eastern United States Seismic Source Characterization for Nuclear Facilities (CEUS‐SSCn), based on least‐squares (LS) regressions made using data from a catalog containing events up through 2008. We recompute these equations using events in the Advanced National Seismic System Comprehensive Earthquake Catalog with multiple magnitudes from 2000 to 2023. Although we prefer the use of orthogonal regressions for our datasets, LS regressions produce broadly similar results, with both approaches exhibiting large deviations from the CEUS‐SSCn conversions, especially at smaller magnitudes. We compare the spatial distribution of annual rates using three different models: (1) the 2023 NSHM conversions, (2) our updated conversions, and (3) no conversions. We find that the choice of conversions leads to substantial differences in the rate forecasts, which can greatly impact the seismic hazard model, particularly in regions with low‐seismicity rates such as the Eastern United States, where the hazard is dominated by gridded seismicity rather than a fault model.

Seismological Research Letters↗
USGS1990

Large springs in the Valley and Ridge Province in Tennessee

Approximately 2,700 miscellaneous discharge measurements for 171 large springs in 28 counties of East Tennessee, predominantly within the Valley and Ridge physiographic province, were analyzed statistically and results tabulated to summarize data useful to the Appalachian Valleys-Piedmont Regional Aquifer System Analysis study. The number of measurements at each spring ranged from 1 to 65. Information from each spring includes station numbers, latitude, longitude, spring name and where data are sufficient, an estimate of the mean discharge and the discharge exceeded by 75%, 50%, and 25% of the miscellaneous measurements. Data are referenced to locations on a 1:1,000 ,000-scale map. The highest mean spring discharge was 32.2 cu ft/sec (14,5000 gallons/min).

Tennessee↗
USGS2026

Critical minerals in zinc ore—An update on Earth Mapping Resources Initiative Research in the Boulder Batholith region, Montana

Plain Language Summary U.S. Geological Survey research, in collaboration with Montana Technical University and Montana Bureau of Geology and Mines, is providing key critical mineral information that may have potential for critical mineral production of several mining districts in the Boulder Batholith region, to better understand the abundance and distribution of natural resources within this region. Continued research can be used to show the potential for previously undiscovered critical mineral resources in southwestern Montana and in other parts of the United States.

Montana↗