USGS Science⌕ Search

SEARCH · USGS Science

Results for “Mining Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73Linked to original sources
USGS2013

A Sr-Nd isotopic study of sand-sized sediment provenance and transport for the San Francisco Bay coastal system

A diverse suite of geochemical tracers, including 87 Sr/ 86 Sr and 143 Nd/ 144 Nd isotope ratios, the rare earth elements (REEs), and select trace elements were used to determine sand-sized sediment provenance and transport pathways within the San Francisco Bay coastal system. This study complements a large interdisciplinary effort (Barnard et al., 2012) that seeks to better understand recent geomorphic change in a highly urbanized and dynamic estuarine-coastal setting. Sand-sized sediment provenance in this geologically complex system is important to estuarine resource managers and was assessed by examining the geographic distribution of this suite of geochemical tracers from the primary sources (fluvial and rock) throughout the bay, adjacent coast, and beaches. Due to their intrinsic geochemical nature, 143 Nd/ 144 Nd isotopic ratios provide the most resolved picture of where sediment in this system is likely sourced and how it moves through this estuarine system into the Pacific Ocean. For example, Nd isotopes confirm that the predominant source of sand-sized sediment to Suisun Bay, San Pablo Bay, and Central Bay is the Sierra Nevada Batholith via the Sacramento River, with lesser contributions from the Napa and San Joaquin Rivers. Isotopic ratios also reveal hot-spots of local sediment accumulation, such as the basalt and chert deposits around the Golden Gate Bridge and the high magnetite deposits of Ocean Beach. Sand-sized sediment that exits San Francisco Bay accumulates on the ebb-tidal delta and is in part conveyed southward by long-shore currents. Broadly, the geochemical tracers reveal a complex story of multiple sediment sources, dynamic intra-bay sediment mixing and reworking, and eventual dilution and transport by energetic marine processes. Combined geochemical results provide information on sediment movement into and through San Francisco Bay and further our understanding of how sustained anthropogenic activities which limit sediment inputs to the system (e.g., dike and dam construction) as well as those which directly remove sediments from within the Bay, such as aggregate mining and dredging, can have long-lasting effects

California↗
USGS1962

Geology and fluorspar deposits of the Levias-Keystone and Dike-Eaton areas, Crittenden County, Kentucky

The fault systems of the Levias-Keystone and Dike-Eaton areas, in the Kentucky-Illinois fiuorspar district, are a complex northeastward-trending sys- tem and a simple northwestward-trending system of steeply dipping normal faults, associated in part with a lamprophyre dike. Fluorspar mining started in the area about 1900 and, as of 1945, more than 200,000 tons of crude ore probably has been mined; most of the ore was from the Levias-Keystone area. A small quantity of zinc and lead ore also is present in the Dike-Eaton area. The deposits are localized along faults that displace fiat-lying or low-dipping limestones, sandstones, and shales of the Meramec and Chester series of Missis- sippian age. Movement along most of the faults was principally vertical, with displacement as much as 600 feet. Some horizontal movement occurred along at least one fault. Geologic mapping of the surface and data from underground workings have revealed 13 faults in an area of four-fifths of a square mile. Only a few of these faults are known to contain economically important deposits of fiuorspar. The most abundant vein minerals are calcite and fiuorite with subordinate quantities of sphalerite, galena, barite, and quartz. Some weathering products of sphalerite and galena are present also. The veins are dominantly calcite that contains fiuorite lenses but in places are mainly fiuorite having lesser quantities of calcite. Sphalerite- and galena-bearing deposits are present in the Dike-Eaton area. The ore bodies mainly are the result of fissure filling and replacement of calcite by fiuorite; in addition a small amount of limestone wallrock probably has been replaced. Residual concentrations of high-grade fluorspar in the overburden above faults have yielded some so-called gravel fiuorspar. The position of the veins within the faults may be related to one or more factors such as type of wallrock, change in dip of the fault, and amount of displacement.

Kentucky↗
USGS2011

Reported historic asbestos mines, historic asbestos prospects, and other natural occurrences of asbestos in California

The map (Plate.pdf), pamphlet (Pamphlet.pdf), and the accompanying datasets in this report provide information for 290 sites in California where asbestos occurs in natural settings, using descriptions found in the geologic literature. Data on location, mineralogy, geology, and relevant literature for each asbestos site are provided. Using the map and digital data in this report, the user can examine the distribution of previously reported asbestos and their geological characteristics in California. This report is part of an ongoing study by the U.S. Geological Survey to identify and map sites where asbestos mineralization occurs in the United States, which includes similar maps and datasets of natural asbestos localities within the Eastern United States (http://pubs.usgs.gov/of/2005/1189/), the Central United States (http://pubs.usgs.gov/of/2006/1211/), the Rocky Mountain States (http://pubs.usgs.gov/of/2007/1182/), the Southwestern United States (http://pubs.usgs.gov/of/2008/1095/), and the Northwestern United States (Oregon and Washington) (http://pubs.usgs.gov/of/2010/1041/). These reports are intended to provide State and local government agencies and other stakeholders with geologic information on reported asbestos mineralization in the United States.

California↗
USGS2013

Water use, availability, and net demand in the Tennessee River watershed within Alabama, 2005

The U.S. Geological Survey worked in cooperation with the Alabama Department of Economic and Community Affairs—Office of Water Resources to estimate water use and water availability for 2005 for the portion of the Tennessee River watershed contained within the borders of the State of Alabama. Estimates of water use and availability are an important part of planning for population and economic growth in the Tennessee River watershed in Alabama. Total water use for the region in 2005 was 5,197 million gallons per day (Mgal/d). Total surface-water withdrawals were 5,139 Mgal/d, and total groundwater withdrawals were about 58 Mgal/d. About 92 percent of the total water withdrawn was surface water used for once-through cooling for thermoelectric power generation. Self-supplied industrial and public-supply water uses accounted for the next greatest uses of water, constituting approximately 49 and 42 percent, respectively, of the total water use excluding thermoelectric power use. Summaries of water use by county and subbasin indicated the areas of greatest water withdrawals and use within the Tennessee River watershed. Limestone (2,012 Mgal/d), Jackson (1,498 Mgal/d), and Colbert (1,363 Mgal/d) Counties were the counties with the greatest total water use in 2005 and had large amounts of water withdrawn for thermoelectric power generation. When water use from thermoelectric power generation was not considered, the counties with the greatest withdrawals were Morgan (124 Mgal/d), Madison (72 Mgal/d), Colbert (69 Mgal/d), and Lawrence (67 Mgal/d). The subbasin with the greatest total water use was Wheeler Lake (2,260 Mgal/d) in the Middle Tennessee—Elk subregion. Wheeler Lake subbasin also had the greatest public-supply, irrigation, industrial, mining, and thermoelectric withdrawals of any subbasin in the Tennessee River watershed within Alabama. Total water availability for the Tennessee River watershed within Alabama was estimated to be 34,567 Mgal/d by the Geological Survey of Alabama. Net water demand for the watershed was calculated by subtracting the Tennessee Valley Authority estimates of return flow from water withdrawals. The net water demand was 136 Mgal/d, which is less than 1 percent of the estimated water available.

Alabama↗
USGS1903

Contributions to economic geology, 1902

This bulletin has been prepared primarily with a view to securing prompt publication of the economic results of investigations by the United States Geological Survey. It is designed to meet the wants of the busy man, and is so condensed that he will be able to obtain results and conclusions with a minimum expenditure of time and energy. It also affords a better idea of the work which the Survey as an organization is-carrying on for the direct advancement of mining interests throughout the country than can readily be obtained from the more voluminous reports. Should this bulletin be favorably received by those interested in the development of the mineral industries of the United States, it is proposed to publish early in each calendar year a similar bulletin containing the results of the last year's field work in economic geology. In the preparation of the present volume, promptness of publication has been made secondary only to the economic utility of the material presented. The papers included are such only as have a direct economic bearing, all questions of purely scientific interest being excluded. The papers represent three classes : (1) Preliminary discussions of the results of extended economic investigations, which will later be published by the Survey in more detailed form; (2) comparatively detailed descriptions of occurrences of economic interest, noted by geologists of the Survey in the course of their field work, but not of sufficient importance to necessitate a later and more extended description; (3) abstracts of certain economic papers which have appeared in Survey publications during the last year, chiefly such as give a general account of the distribution and mode of occurrence of particular mineral deposits throughout the United States. The papers have been grouped according to the subjects treated. At the end of each section is given a list of previous publications on that subject by this Survey. These lists will be found serviceable by those who wish to ascertain what has been accomplished by the Survey in the investigation of any particular group of mineral products. They are generally confined to Survey publications, though a few titles of important papers published elsewhere by members of the Survey are included.

Bulletin↗
USGS2020

Geologic and mineral map (modified from the 1975 original map compilation by A.S. Shadchinev and others) and hyperspectral surface materials maps of the Ghorband, Salang, and Panjsher River Basins; Kapisa, Panjsher, Parwan, and Baghlan Provinces, Afghanistan

Introduction The geologic map and cross sections are a redrafted and modified version of the Geologic map and map of mineral resources of the basins of Ghorband, Salang, and Panjsher ; located in the Kapisa, Panjsher, Parwan, and Baghlan Provinces, Afghanistan. The original map and cross sections are contained in an unpublished Soviet report no. 1162A (Shadchinev and others, 1975) prepared in cooperation with the Ministry of Mines and Industries of the Royal Government of Afghanistan, in Kabul during 1975, under contract no. 55–184/17500. This redrafted map consists of parts of quadrangle map sheets 503–F, 504–C, 504–D, 504–E, and 504–F shown on an index map that can be found on the original 1:100,000-scale map by Shadchinev and others (1975). The redrafted map and cross sections illustrate the mineral deposits and geologic structure of the Ghorband, Salang, and Panjsher River Basins. Because there were no location coordinates provided on the original Soviet map, the map was registered to drainage patterns identified by contours from the Global Digital Elevation Model (GDEM). The end result can only be considered a best fit for the map extend, and some features may not be positioned in their correct geographic location. The redrafted geologic map and cross sections reproduce the topology of rock units, contacts, and faults of the original Soviet map and cross sections, and includes minor modifications based on our examination of the originals. Table 1, provided on both map sheets 1 and 2, shows mineral commodity locations also from the original Soviet map. However, because of the poor quality of the original map, some map features could not be identified and some may be misinterpreted. Further, we have attempted to translate the original Russian terminology and rock classifications into modern English geologic usage as literally as possible without changing any genetic or process-oriented implications in the original rock-unit descriptions. We also use the rock-unit age designations from the original maps, however, rock-unit colors and symbols differ from the colors and symbols shown on the original version. Unit colors were selected according to the color and pattern scheme of the Commission for the Geological Map of the World (http://www.ccgm.org). Unit symbols were assigned based on the geologic age and unit descriptions provided on the original Soviet map. Elevations on the cross sections are derived from the original topography and may not match the Global GDEM topography used on the redrafted geologic map of this report.

Baghlan, Kapisa, Panjsher, Parwan↗
USGS1968

The relationship of geophysical measurements to engineering and construction parameters in the Straight Creek Tunnel pilot bore, Colorado

Seismic-refraction and electrical-resistivity measurements made along the walls of the Straight Creek Tunnel pilot bore indicate that both a low-velocity and a high-resistivity layer exist in the disturbed rock surrounding the excavation. Seismic measurements were analyzed to obtain the thickness and seismic velocity of rock in the low-velocity layer, the velocity of rock behind the layer and the amplitude of seismic energy received at the detectors. Electrical-resistivity measurements were analyzed to obtain the thickness and electrical resistivity of the high-resistivity layer and the resistivity of rock behind the layer. The electrical resistivity and the seismic velocity of rock at depth, the thickness of rock in the low-velocity layer, and the relative amplitude of seismic energy were correlated against the following parameters, all of which are important in tunnel construction: height of the tension arch, stable vertical rock load, rock quality, rate of construction and cost per foot, percentage of lagging and blocking, set spacing, and type and amount of steel support required, The correlations were statistically meaningful, having correlation coefficients ranging in absolute value from about 0·7 to nearly 1·0. This finding suggests the possibility of predicting parameters of interest in tunnel construction from geophysical measurements made in feeler holes drilled ahead of a working face. Predictions might be based on correlations established either during the early stages of construction or from geophysical surveys in other tunnels of similar design in similar geologic environments.

Colorado↗
USGS2010

Organic petrology of subbituminous carbonaceous shale samples from Chalāw, Kabul Province, Afghanistan: Considerations for paleoenvironment and energy resource potential

Neogene (?) subbituminous carbonaceous shale deposits from Chalāw, Afghanistan, were investigated through organic petrology techniques and standard coal analyses to determine paleoenvironment and potential for resource utilization. The Chalāw deposit, approximately 30 km southeast of Kabul, currently is exploited for brick making and domestic heating and cooking. Three multiple-bench channel samples of the mined bed at Chalāw were collected and evaluated. The presence of significant huminite (ranging from 0.2 to 59.0 vol.%, mineral-inclusive basis) is suggestive of a terrestrial lignin-rich precursor plant material. Measured reflectance values of 0.38–0.55% indicate subbituminous rank. This rank suggests burial depths of approximately 1500 m and maximum temperatures of approximately 50 °C. Structured liptinite macerals generally are absent except for some fluorescing morphologies interpreted to be poorly-preserved root cork suberinite. Sponge spicule bioliths including gemmoscleres and megascleres are common. These petrographic observations, in addition to high mineral matter content (33 to > 95 vol.%), medium to high sulfur content (2.1–11.5 wt.%, dry basis; db), and the presence of common gastropod? shell fragments and an aragonite-needle chalk bed are consistent with, but not directly indicative of, a marginal marine or estuarine mangrove depositional environment. However, additional data are necessary to confirm this hypothesis and deposition in a freshwater environment cannot be ruled out at this time. Commercial-scale development and utilization of the Chalāw deposit as a thermal fuel resource may be possible using a fluidized bed combustion system which could accept the low-quality mine product currently produced. Samples examined herein contain high-ash yield (45–90 wt.%, db), high total moisture content (17–39 wt.%), low calorific value (980–6860 Btu/lb, m,mmf), and have poor agglomerating properties (FSI = 0), consistent with fuels utilized in fluidized bed combustors. However, delineation of the extent of the deposit through field investigation will be necessary to make a quantified resource estimate for mine planning.

Kabul Province↗
USGS1961

Ground-water control in the Neyveli lignite field, South Arcot district, Madras State, India

Unconsolidated deposits of the Cuddalore series of Miocene age underlie much of the coastal plain of southern Madras . Several lignite seams occur in a thick sequence of sand, gravel, and clay that dips seaward about 40 to 100 feet per mile. The principal seam of lignite mapped in the Neyveli area averages more than 50 feet in thickness, underlies at least 80 square miles, and occurs at a minimum depth of 165 feet near Neyveli , where deposits totalling 230 million tons have been proved in an area of 4J square miles. The lignite seam is immediately underlain, throughout its area of occurrence, by a thick bed of sand and gravel that contains artesian water, the head of which is more than 100 feet above the top of the lignite at Neyveli . The sand and gravel aquifer is exposed to recharge in and near its outcrop area, 6 to 10 miles northwest of Neyveli , where the average annual rainfall is 41 inches. Hydraulic tests of the aquifer indicate that ground-water control for mining by opencast from a pit 6,000 feet long and 1,200 feet wide will require continuous withdrawal of about 40,000 gallons (Imperial) per minute from wells in and adjacent to the mine. The well field , including 50 to 65 large-capacity wells, must move with the open cut; and no appreciable decrease in the withdrawal rate can be expected throughout the life of the mine, which is designed to produce about 3j million tons of raw lignite per year.

Madras State↗
USGS1915

Some mining districts in northeastern California and northwestern Nevada

Scattered over its sparsely settled and generally arid expanse the State of Nevada contains approximately 200 centers of past or present mining activity. Some of these mining districts, such as the Comstock,1 Eureka,2 Tonopah,3 and Goldfield,4 have added millions to the world's wealth in precious metals and have been given thorough geologic study. Others of less note, including Silver Peak,5 Manhattan,° Bullfrog,? Yerington,8 Searchlights and Jarbidge,9 have been made the subjects of brief reports by Federal geologists.

California, Nevada↗
USGS2006

Freshwater diatomite deposits in the western United States

Freshwater diatomite deposits in the Western United States are found in lake beds that formed millions of years ago. These diatom-rich sediments are among the Nation's largest commercial diatomite deposits. Each deposit contains billions of tiny diatom skeletons, which are widely used for filtration, absorption, and abrasives. New studies by the U.S. Geological Survey (USGS) are revealing how ancient lakes in the Western States produced such large numbers of diatoms. These findings can be used by both land-use managers and mining companies to better evaluate diatomite resources in the region.

Fact Sheet↗
USGS2010

Historical files from Federal government mineral exploration-assistance programs, 1950 to 1974

Congress enacted the Defense Production Act in 1950 to provide funding and support for the exploration and development of critical mineral resources. From 1950 to 1974, three Department of the Interior agencies carried out this mission. Contracts with mine owners provided financial assistance for mineral exploration on a joint-participation basis. These contracts are documented in more than 5,000 'dockets' now archived online by the U.S. Geological Survey. This archive provides access to unique and difficult to recreate information, such as drill logs, assay results, and underground geologic maps, that is invaluable to land and resource management organizations and the minerals industry. An effort to preserve the data began in 2009, and the entire collection of dockets was electronically scanned. The scanning process used optical character recognition (OCR) when possible, and files were converted into Portable Document Format (.pdf) files, which require Adobe Reader or similar software for viewing. In 2010, the scans were placed online (http://minerals.usgs.gov/dockets/) and are available to download free of charge.

Fact Sheet↗
USGS2010

Chemical analyses in the World Coal Quality Inventory

The main objective of the World Coal Quality Inventory (WoCQI) was to collect and analyze a global set of samples of mined coal during a time period from about 1995 to 2006 (Finkelman and Lovern, 2001). Coal samples were collected by foreign collaborators and submitted to country specialists in the U.S. Geological Survey (USGS) Energy Program. However, samples from certain countries, such as Afghanistan, India, and Kyrgyzstan, were collected collaboratively in the field with USGS personnel. Samples were subsequently analyzed at two laboratories: the USGS Inorganic Geochemistry Laboratory located in Denver, CO and a commercial laboratory (Geochemical Testing, Inc.) located in Somerset, PA. Thus the dataset, which is in Excel (2003) format and includes 1,580 samples from 57 countries, does not have the inter-laboratory variability that is present in many compilations. Major-, minor-, and trace-element analyses from the USGS laboratory, calculated to a consistent analytical basis (dry, whole-coal) and presented with available sample identification information, are sorted alphabetically by country name. About 70 percent of the samples also have data from the commercial laboratory, which are presented on an as-received analytical basis. The USGS initiated a laboratory review of quality assurance in 2008, covering quality control and methodology used in inorganic chemical analyses of coal, coal power plant ash, water, and sediment samples. This quality control review found that data generated by the USGS Inorganic Geochemistry Laboratory from 1996 through 2006 were characterized by quality practices that did not meet USGS requirements commonly in use at the time. The most serious shortcomings were (1) the adjustment of raw sample data to standards when the instrument values for those standards exceeded acceptable limits or (2) the insufficient use of multiple standards to provide adequate quality assurance. In general, adjustment of raw data to account for instrument 'drift' is an acceptable practice within strictly defined limits. During the denoted period, USGS required that the maximum adjustment of instrument values, guided by calibration standards, was not allowed to exceed 10 percent. However, in some cases, the Inorganic Geochemistry Laboratory released data that were adjusted by more than 10 percent and (or) were not constrained by an adequate number of control standards. Original instrument values no longer exist for about 80 percent of the analyses during this period; therefore, the acceptability of drift corrections for most of the samples analyzed cannot be determined. For these reasons, the WoCQI data from the USGS Inorganic Geochemistry Laboratory should be used with care. For more information, individuals may contact laboratory management at EnergyLabs@usgs.gov with specific questions about particular datasets or analytical attributes. Standard USGS sampling methods were provided and recommended to collaborators, but the analyzed samples may or may not be representative of their locale; for some samples, only limited information is available concerning sample provenance. Single samples cannot represent spatial or temporal variability within a coal area. Geochemical datasets of U.S. coals can be found in the COALQUAL database (Bragg and others, 1997) and the National Coal Quality Inventory (Hatch and others, 2006), as only non-U.S. sample data are presented in the WoCQI. Although the WoCQI does not contain worldwide coverage of coal deposits, it is truly a unique and valuable compilation. The information in the WoCQI should prove useful for identifying possible areas for future global coal research.

Open-File Report↗
USGS2010

Water-quality, bed-sediment, and biological data (October 2008 through September 2009) and statistical summaries of long-term data for streams in the Clark Fork basin, Montana

Water, bed sediment, and biota were sampled in streams from Butte to near Missoula, Montana, as part of a long-term monitoring program in the upper Clark Fork basin; additional water samples were collected in the Clark Fork basin from sites near Missoula downstream to near the confluence of the Clark Fork and Flathead River as part of a supplemental sampling program. The sampling programs were conducted by the U.S. Geological Survey in cooperation with the U.S. Environmental Protection Agency to characterize aquatic resources in the Clark Fork basin of western Montana, with emphasis on trace elements associated with historic mining and smelting activities. Sampling sites were located on the Clark Fork and selected tributaries. Water samples were collected periodically at 24 sites from October 2008 through September 2009. Bed-sediment and biota samples were collected once at 13 sites during August 2009. This report presents the analytical results and quality-assurance data for water-quality, bed-sediment, and biota samples collected at all long-term and supplemental monitoring sites from October 2008 through September 2009. Water-quality data include concentrations of selected major ions, trace elements, and suspended sediment. Turbidity was analyzed for water samples collected at the four sites where seasonal daily values of turbidity were being determined as well as at Clark Fork above Missoula. Nutrients also were analyzed at all the supplemental water-quality sites, except for Clark Fork Bypass, near Bonner. Daily values of suspended-sediment concentration and suspended-sediment discharge were determined for four sites. Bed-sediment data include trace-element concentrations in the fine-grained fraction. Biological data include trace-element concentrations in whole-body tissue of aquatic benthic insects. Statistical summaries of long-term water-quality, bed-sediment, and biological data for sites in the upper Clark Fork basin are provided for the period of record since 1985.

Open-File Report↗
USGS2012

Water-quality, bed-sediment, and biological data (October 2009 through September 2010) and statistical summaries of data for streams in the Clark Fork basin, Montana

Water, bed sediment, and biota were sampled in streams from Butte to near Missoula, Montana, as part of a monitoring program in the upper Clark Fork basin. The sampling program was conducted by the U.S. Geological Survey in cooperation with the U.S. Environmental Protection Agency to characterize aquatic resources in the Clark Fork basin of western Montana, with emphasis on trace elements associated with historic mining and smelting activities. Sampling sites were located on the Clark Fork and selected tributaries. Water samples were collected periodically at 20 sites from October 2009 through September 2010. Bed-sediment and biota samples were collected once at 13 sites during August 2010. This report presents the analytical results and quality-assurance data for water-quality, bed-sediment, and biota samples collected at sites from October 2009 through September 2010. Water-quality data include concentrations of selected major ions, trace elements, and suspended sediment. Turbidity was analyzed for water samples collected at the four sites where seasonal daily values of turbidity were being determined. Daily values of suspended-sediment concentration and suspended-sediment discharge were determined for four sites. Bed-sediment data include trace-element concentrations in the fine-grained fraction. Biological data include trace-element concentrations in whole-body tissue of aquatic benthic insects. Statistical summaries of water-quality, bed-sediment, and biological data for sites in the upper Clark Fork basin are provided for the period of record since 1985.

Montana↗
USGS2016

Estimation of daily mean streamflow for ungaged stream locations in the Delaware River Basin, water years 1960–2010

The ability to characterize baseline streamflow conditions, compare them with current conditions, and assess effects of human activities on streamflow is fundamental to water-management programs addressing water allocation, human-health issues, recreation needs, and establishment of ecological flow criteria. The U.S. Geological Survey, through the National Water Census, has developed the Delaware River Basin Streamflow Estimator Tool (DRB-SET) to estimate baseline (minimally altered) and altered (affected by regulation, diversion, mining, or other anthropogenic activities) and altered streamflow at a daily time step for ungaged stream locations in the Delaware River Basin for water years 1960–2010. Daily mean baseline streamflow is estimated by using the QPPQ method to equate streamflow expressed as a percentile from the flow-duration curve (FDC) for a particular day at an ungaged stream location with the percentile from a FDC for the same day at a hydrologically similar gaged location where streamflow is measured. Parameter-based regression equations were developed for 22 exceedance probabilities from the FDC for ungaged stream locations in the Delaware River Basin. Water use data from 2010 is used to adjust the baseline daily mean streamflow generated from the QPPQ method at ungaged stream locations in the Delaware River Basin to reflect current, or altered, conditions. To evaluate the effectiveness of the overall QPPQ method contained within DRB-SET, a comparison of observed and estimated daily mean streamflows was performed for 109 reference streamgages in and near the Delaware River Basin. The Nash-Sutcliffe efficiency (NSE) values were computed as a measure of goodness of fit. The NSE values (using log 10 streamflow values) ranged from 0.22 to 0.98 (median of 0.90) for 45 streamgages in the Upper Delaware River Basin and from -0.37 to 0.98 (median of 0.79) for 41 streamgages in the Lower Delaware River Basin.

Delaware River Basin↗
USGS2019

Time-domain electromagnetic soundings for the delineation of saline groundwater in the Genesee River Valley, Western New York, 2016-2017

The U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, is investigating the distribution of saline groundwater in the Genesee River Valley near the former Retsof salt mine (fig. 1). As part of this study, paired time-domain electromagnetic (TEM) soundings and horizontal-to-vertical spectral ratio (HVSR) seismic soundings were made at 39 locations during the fall of 2016 to determine the presence of saline groundwater and depth to the bedrock surface, respectively. All measurement sites were west of Geneseo, New York, on the Genesee River valley floor north and south of the sinkhole area that developed as a result of the roof collapse and flooding of the Retsof mine in 1994 (fig. 1). An integrated analysis of the TEM and HVSR soundings with borehole logs, coupled with groundwater-sample data from previous investigations, allowed the delineation of zones of high electrical conductivity associated with saline water in the lower part of the valley fill and underlying bedrock to depths greater than 1,000 feet (ft). This article describes the TEM sounding method and its application in the ongoing investigation, presents results of the TEM analysis at two of the sounding sites, and identifies proposed sites for additional TEM/HVSR sounding data collection during the fall of 2017. Supporting data for this study are available in a separate data release (Johnson and others, 2017).

New York↗