USGS Science⌕ Search

SEARCH · USGS Science

Results for “Electronics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73Linked to original sources
USGS1986

Improvement of filament-protection circuitry in a Finnigan model 251 mass spectrometer

As delivered from Finnigan MAT, the emission current of the Leybold-Heraeus model IM210 ionization vacuum gage on a model 251 isotope ratio mass spectrometer can turn on as soon as the ' PUMP ON ' switch is depressed, before a good vacuum in the mass spectrometer is attained. The filament in the source of the mass spectrometer may turn on at the same time, thereby shortening its life or burning it out if the vacuum is poor. This design flaw can be corrected by a simple modification of the electronic circuitry. (Author 's abstract)

Open-File Report↗
USGS1988

Borehole geophysics applied to ground-water investigations

The purpose of this manual is to provide hydrologists, geologists, and others who have the necessary training with the basic information needed to apply the most useful borehole-geophysical-logging techniques to the solution of problems in ground-water hydrology. Geophysical logs can provide information on the construction of wells and on the character of the rocks and fluids penetrated by those wells, in addition to changes in the character of these factors with time. The response of well logs is caused by: petrophysical factors; the quality; temperature, and pressure of interstitial fluids; and ground-water flow. Qualitative and quantitative analysis of the analog records and computer analysis of digitized logs are used to derive geohydrologic information. This information can then be extrapolated vertically within a well and laterally to other wells using logs. The physical principles by which the mechanical and electronic components of a logging system measure properties of rocks, fluids and wells, and the principles of measurement need to be understood to correctly interpret geophysical logs. Planning the logging operation involves selecting the equipment and the logs most likely to provide the needed information. Information on well construction and geohydrology are needed to guide this selection. Quality control of logs is an important responsibility of both the equipment operator and log analyst and requires both calibration and well-site standardization of equipment. Logging techniques that are widely used in ground-water hydrology or that have significant potential for application to this field include: spontaneous potential, resistance, resistivity, gamma, gamma spectrometry, gamma-gamma, neutron, acoustic velocity, acoustic televiewer, caliper, and fluid temperature, conductivity, and flow. The following topics are discussed for each of these techniques: principles and instrumentation, calibration and standardization, volume of investigation, extraneous effects, and interpretation and applications.

Open-File Report↗
USGS1988

Selected annotated bibliographies for adaptive filtering of digital image data

Digital spatial filtering is an important tool both for enhancing the information content of satellite image data and for implementing cosmetic effects which make the imagery more interpretable and appealing to the eye. Spatial filtering is a context-dependent operation that alters the gray level of a pixel by computing a weighted average formed from the gray level values of other pixels in the immediate vicinity. Traditional spatial filtering involves passing a particular filter or set of filters over an entire image. This assumes that the filter parameter values are appropriate for the entire image, which in turn is based on the assumption that the statistics of the image are constant over the image. However, the statistics of an image may vary widely over the image, requiring an adaptive or "smart" filter whose parameters change as a function of the local statistical properties of the image. Then a pixel would be averaged only with more typical members of the same population. This annotated bibliography cites some of the work done in the area of adaptive filtering. The methods usually fall into two categories, (a) those that segment the image into subregions, each assumed to have stationary statistics, and use a different filter on each subregion, and (b) those that use a two-dimensional "sliding window" to continuously estimate the filter either the spatial or frequency domain, or may utilize both domains. They may be used to deal with images degraded by space variant noise, to suppress undesirable local radiometric statistics while enforcing desirable (user-defined) statistics, to treat problems where space-variant point spread functions are involved, to segment images into regions of constant value for classification, or to "tune" images in order to remove (nonstationary) variations in illumination, noise, contrast, shadows, or haze. Since adpative filtering, like nonadaptive filtering, is used in image processing to accomplish various goals, this bibliography is organized in subsections based on application areas. Contrast enhancement, edge enhancement, noise suppression, and smoothing are typically performed in order imaging process, (for example, degradations due to the optics and electronics of the sensor, or to blurring caused by the intervening atmosphere, uniform motion, or defocused optics). Some of the papers listed may apply to more than one of the above categories; when this happens the paper is listed under the category for which the paper's emphasis is greatest. A list of survey articles is also supplied. These articles are general discussions on adaptive filters and reviews of work done. Finally, a short list of miscellaneous articles are listed which were felt to be sufficiently important to be included, but do not fit into any of the above categories. This bibliography, listing items published from 1970 through 1987, is extensive, but by no means complete. It is intended as a guide for scientists and image analysts, listing references for background information as well as areas of significant development in adaptive filtering.

Open-File Report↗
USGS1988

Operating manual for the U.S. Geological Survey minimonitor, 1988 revised edition; punched-paper-tape model

This manual describes the U.S. Geological Survey Minimonitor Water Quality Data Measuring and Recording System. Instructions for calibrating, servicing, maintaining, and operating the system are provided. The Survey Minimonitor is a battery-powered , multiparameter water quality monitoring instrument designed for field use. A watertight can containing signal conditioners is connected with cable and waterproof connectors to various water quality sensors. Data are recorded on a punched paper-tape recorder. An external battery is required. The operation and maintenance of various sensors and signal conditioners are discussed, for temperature, specific conductance, dissolved oxygen, and pH. Calibration instructions are provided for each parameter, along with maintenance instructions. Sections of the report explain how to connect the Minimonitor to measure direct-current voltages, such as signal outputs from other instruments. Instructions for connecting a satellite data-collection platform or a solid-state data recorder to the Minimonitor are given also. Basic information is given for servicing the Minimonitor and trouble-shooting some of its electronic components. The use of test boxes to test sensors, isolate component problems, and verify calibration values is discussed. (USGS)

Open-File Report↗
USGS1989

Functional requirements of computer systems for the U.S. Geological Survey, Water Resources Division, 1988-97

Investigating the occurrence, quantity, quality, distribution, and movement of the Nation 's water resources is the principal mission of the U.S. Geological Survey 's Water Resources Division. Reports of these investigations are published and available to the public. To accomplish this mission, the Division requires substantial computer technology to process, store, and analyze data from more than 57,000 hydrologic sites. The Division 's computer resources are organized through the Distributed Information System Program Office that manages the nationwide network of computers. The contract that provides the major computer components for the Water Resources Division 's Distributed information System expires in 1991. Five work groups were organized to collect the information needed to procure a new generation of computer systems for the U. S. Geological Survey, Water Resources Division. Each group was assigned a major Division activity and asked to describe its functional requirements of computer systems for the next decade. The work groups and major activities are: (1) hydrologic information; (2) hydrologic applications; (3) geographic information systems; (4) reports and electronic publishing; and (5) administrative. The work groups identified 42 functions and described their functional requirements for 1988, 1992, and 1997. A few new functions such as Decision Support Systems and Executive Information Systems, were identified, but most are the same as performed today. Although the number of functions will remain about the same, steady growth in the size, complexity, and frequency of many functions is predicted for the next decade. No compensating increase in the Division 's staff is anticipated during this period. To handle the increased workload and perform these functions, new approaches will be developed that use advanced computer technology. The advanced technology is required in a unified, tightly coupled system that will support all functions simultaneously. The new approaches and expanded use of computers will require substantial increases in the quantity and sophistication of the Division 's computer resources. The requirements presented in this report will be used to develop technical specifications that describe the computer resources needed during the 1990's. (USGS)

Open-File Report↗
USGS1989

Construction data and retrieval procedures for selected wells drilled from 1985 through 1987 at Oak Ridge National Laboratory, Tennessee

Twenty-eight wells were constructed by the U. S. Geological Survey for use in describing the groundwater flow system in Melton Valley, at the Oak Ridge National Laboratory in eastern Tennessee. The wells were installed at 18 locations in Melton Valley and along the Clinch River during the period 1985 through 1987. During the same period, 19 wells were constructed by Oak Ridge National Laboratory at 7 locations in or near radioactive-waste burial grounds in Melton Valley. Construction data for all 47 wells are in the U.S. Geological Survey Groundwater Site Inventory data system, where information is also stored for 450 wells that were completed at the laboratory in earlier years. The data can be electronically retrieved by personnel who have access to the U.S. Geological Survey Prime computer located in Nashville, Tennessee, and retrieval procedures are given in the report. (USGS)

Tennessee↗
USGS1990

U.S. Geological Survey National Computer Technology Meeting; Program and abstracts, May 7-11, 1990

he Water Resources Division of the U.S. Geological Survey has made major advancements in the use of computer technology to meet the Survey‘s mission of providing the hydrologic information and understanding needed for the optimum use and management of the Nation’s water resources. The Division requires substantial computer technology to process, store, and analyze data from about 60,000 sites. To meet this workload, the Division organized its computer resources in 1982 through the Distributed Information System (DIS) Program Office, which manages the Division's national network of computers. The DIS is designed to provide computer resources in support of the Division’s current and future activities -acquisition and storage of hydrologic information, hydrologic data analysis, geographic information systems, reports and electronic report processing, and administration. The Water Resources Division sponsored the first DIS Site Administrators Meeting in March 1984 in Denver, Colorado, and a second meeting in October 198.5 in Hyannis, Massachusetts. The thrust of the first two national meetings was the training of Water Resources Division personnel in the use and administration of the Division’s computer hardware and software. Starting with the third meeting, which was held in Atlanta, Georgia, in May 1987, the name was changed to the National Computer Technology Meeting because the format evolved to include presentation of papers prepared by computer and scientific personnel in the Division. These papers document work done in the field of computer science as applied to hydrology, including the design and use of geographic information systems, use of nationally distributed software, the development of procedures for data-base management, and research papers on the expanding field of computer technology. Training continues to be a major part of the National Computer Technology Meeting. This year’s meeting includes training on the use of UNIX operating system, UNIX system administration and security, the C programming language, local area networking, as well as a publication seminar. This report includes abstracts for papers and posters that have been accepted for presentation at the Fifth National Computer Technology Meeting.

Open-File Report↗
USGS1991

Volcanologic investigations in the Commonwealth of the Northern Mariana Islands, September-October 1990

U.S. Geological Survey volcanologists examined the ten volcanoes in the active Mariana Arc north of Saipan in May 1992, at the request of the Governor and the Disaster Control Office of the Commonwealth of the Northern Mariana Islands (CNMI). A shallow earthquake swarm on Anatahan in March-April 1990 and reports of possible new fuming on Agrigan in August 1990 had prompted the evacuation of all CNMI islands north of Saipan. None of the volcanoes in the chain erupted during our visit. Five uninhabited islands (Farallon de Pajaros, Maug, Asuncion, Guguan, and Sarigan) were inspected only from the air, while the other four were studied in more detail. The previously installed seismic stations on Anatahan, Alamagan, and South Pagan were upgraded. A new station was established at the southwestern base of the intermittently active Mount Pagan, on the northern end of Pagan Island. Portable seismometers were operated on Anatahan, Alamagan, Pagan, and Agrigan. The seismometers on Anatahan, Alamagan, and Agrigan recorded no local shallow earthquake swarms nor volcanic tremor indicative of shallow magmatic movement. On Mount Pagan, intermittent low-amplitude tremor indicated the continuing possibility of occasional small ash eruptions, which prior to our visit had been witnessed in April 1992. Ash eruptions resumed in February 1993. Electronic distance measurement (EDM) lines were remeasured on Agrigan, Mount Pagan, and Anatahan. Line length changes were generally insignificant, in accord with the absence of significant shallow seismicity. Hot spring waters were collected on Agrigan, Pagan, and Anatahan, and fumarole temperatures were measured on Agrigan, Pagan, Alamagan, and Anatahan. The temperature data showed no indication of an impending significant change in the state of these volcanoes. We mapped the geology of Alamagan, collected charcoal to date eruptions of Alamagan and Mount Pagan, and collected rocks on Agrigan, Pagan, Alamagan, and Anatahan for petrographic and chemical studies. We conclude that the low shallow seismicity, lack of significant deformation, and low fumarole temperatures suggest that no eruption is likely soon on Agrigan, Alamagan, or Anatahan. The persistent low-level volcanic tremor on Mount Pagan suggests that intermittent small explosive eruptions may continue to occur.

Open-File Report↗
USGS1993

Earthquake locations determined by the Southern Alaska seismograph network for October 1971 through May 1989

This report describes the instrumentation and evolution of the U.S. Geological Survey’s regional seismograph network in southern Alaska, provides phase and hypocenter data for seismic events from October 1971 through May 1989, reviews the location methods used, and discusses the completeness of the catalog and the accuracy of the computed hypocenters. Included are arrival time data for explosions detonated under the Trans-Alaska Crustal Transect (TACT) in 1984 and 1985. The U.S. Geological Survey (USGS) operated a regional network of seismographs in southern Alaska from 1971 to the mid 1990s. The principal purpose of this network was to record seismic data to be used to precisely locate earthquakes in the seismic zones of southern Alaska, delineate seismically active faults, assess seismic risks, document potential premonitory earthquake phenomena, investigate current tectonic deformation, and study the structure and physical properties of the crust and upper mantle. A task fundamental to all of these goals was the routine cataloging of parameters for earthquakes located within and adjacent to the seismograph network. The initial network of 10 stations, 7 around Cook Inlet and 3 near Valdez, was installed in 1971. In subsequent summers additions or modifications to the network were made. By the fall of 1973, 26 stations extended from western Cook Inlet to eastern Prince William Sound, and 4 stations were located to the east between Cordova and Yakutat. A year later 20 additional stations were installed. Thirteen of these were placed along the eastern Gulf of Alaska with support from the National Oceanic and Atmospheric Administration (NOAA) under the Outer Continental Shelf Environmental Assessment Program to investigate the seismicity of the outer continental shelf, a region of interest for oil exploration. Since then the region covered by the network remained relatively fixed while efforts were made to make the stations more reliable through improved electronic instrumentation and strengthened antenna systems. The majority of the stations installed since 1980 were operated only temporarily (from one to several years) for special studies in various areas within the network. Due to reduced funding, the network was trimmed substantially in the summer of 1985 with the closure of 15 stations, 13 of which were located in and around the Yakataga seismic gap. To further reduce costs, two telephone circuits were dropped and multiple radio relays were installed in their place. This economy reduced the reliability of these telemetry links. In addition, data collection from the areas around Cordova and Yakutat was compromised by the necessity of relying on triggered event recording using PC-based systems (Rogers, 1993) that were not fully developed and which proved to be less reliable than anticipated. The principal means of recording throughout the time period of this catalog was 20-channel oscillographs on 16-mm film (Teledyne Geotech Develocorder, Model RF400 and 4000D). Initially one Develocorder was operated at the USGS Alaskan headquarters in Anchorage, but in 1972 recording was shifted to the National Oceanic and Atmospheric Administration (NOAA) Palmer Observatory (currently the West Coast and Alaska Tsunami Warning Center). The Develocorders were turned off at the end of May 1989, and after that time recording was done in digital format at the Geophysical Institute of the University of Alaska in Fairbanks (GIUA). Thus, this catalog covers the entire period of film recording.

Alaska↗
USGS1994

Ground-water quality and geochemistry in Dayton, Stagecoach, and Churchill Valleys, western Nevada

The U.S. Geological Survey investigated the quality of ground water in the Dayton, Stagecoach, and Churchill Valleys as part of the Carson River Basin National Water-Quality Assessment (NAWQA) pilot study. Four aquifer systems have been de- lineated in the study area. Principal aquifers are unconsolidated deposits at altitudes of less than 4,900 feet above sea level and more than 50 feet below land surface. Shallow aquifers are at altitudes of less than 4,900 feet and less than 50 feet below land surface. Upland aquifers are above 4,900 feet and provide recharge to the principal aquifers. Thermal aquifers, defined as those having a water temperature greater than 30 degrees Celsius, are also present. Ground water used in Dayton, Stagecoach, and Churchill Valleys is pumped from principal aquifers in unconsolidated basin-fill deposits. Ground water in these aquifers originates as precipitation in the adjacent mountains and is recharged by the Carson River and by underflow from adjacent upstream valleys. Ground-water flow is generally parallel to the direction of surface-water flow in the Carson River. Ground water is discharged by pumping, evapo- transpiration, and underflow into the Carson River. The results of geochemical modeling indicate that as ground water moves from upland aquifers in mountainous recharge areas to principal aquifers in basin-fill deposits, the following processes probably occur: (1) plagioclase feldspar, sodium chloride, gypsum (or pyrite), potassium feldspar, and biotite dissolve; (2) calcite precipitates; (3) kaolinite forms; (4) small amounts of calcium and magnesium in the water exchange for potassium on aquifer minerals; and (5) carbon dioxide is gained or lost. The geochemical models are consistent with (1) phases identified in basin- fill sediments; (2) chemical activity of major cations and silica; (3) saturation indices of calcite and amorphous silica; (4) phase relations for aluminosilicate minerals indicated by activity diagrams; and (5) results of optical, X-ray diffraction, and scanning-electron microscopy examination of mineral grains in the aquifer sediments. Sulfur-isotopic composition of ground- water samples also supports the models. In general, the quality of ground water in the study area meets Nevada State drinking-water standards and is acceptable for most uses. In addition to analysis for major ions, samples were analyzed for 22 inorganic trace elements, 3 nutrients, and 4 radionuclides. Selenium in 1 sample is the only constituent that exceeded Nevada State primary drinking-water standards. Nevada State secondary- drinking water standards were exceeded for fluoride in 1 sample, for iron in 7 samples, and for manganese in 19 samples. Minor constituent con- centrations are generally the result of local redox conditions, and are primarily from minerals in volcanic and marine metasedimentary rocks, metal- oxide coatings on mineral grains, and organic matter.

Open-File Report↗
USGS1993

Proceedings of a pressure transducer-packer workshop, June 25-28, 1991

The U.S. Geological Survey conducted its first Pressure Transducer-Packer Workshop in Denver, Colorado, June 25-28, 1991. Nineteen attendees from the Survey, Environment Canada, academia, and the private sector presented papers concerning their experiences with the use of transducers and packers in hydrogeologic investigations. Workshop partici- pants concluded that fixed-head packers are generally more reliable than other types and that there is a need for a wet/wet transducer for deep wells. The group recommended that simple downhole technology be used, that only rugged commercially available packers be purchased, and that it is imperative electrical connections and transducer electronics be kept dry. (USGS)

Open-File Report↗
USGS1994

Review of literature on the testing of point-velocity current meters

The U.S. Geological Survey is in the process of evaluating point-velocity current meters. As part of this evaluation process, a review of the literature pertaining to the testing of point-velocity current meters was conducted. A listing of current-meter testing found in the literature was compiled and is grouped according to the type of meter tested and the type of test conducted. Meter types included in the review were vertical- and horizontal-axis mechanical current meters and electromagnetic acoustic electronic current meters. Laser current meters are not included in the review because there are no practical laser meter designs for field velocity measurements. The results of the literature review indicated that there has not been a comprehensive testing of the commonly available current meters since the 1920's.

Open-File Report↗
USGS1995

Volcanic investigations in the Commonwealth of the Northern Mariana Islands, April to May 1994

A team of U.S. Geological Survey geologists, a seismologist, and technicians gathered new geologic, seismic, and deformation data in the Commonwealth of the Northern Mariana Islands (CNMI). Nine volcanic islands on the active East Mariana Ridge north of Saipan were examined between April 20 and May 3, 1994. In addition, a new radio-telemetry seismic station was installed on the island of Agrihan (also spelled Agrigan). This report describes our continuing efforts, that began in May 1981, to establish volcano monitors and to assess hazards in the CNMI. Our previous visits, from September 1990 to May 1992, are documented in Moore and others (1991, 1993). Regional seismicity of the Mariana Island region, as recorded by the USGS National Earthquake Information Center (NEIC), included at least 324 events between January 1, 1991, and February 4, 1994. The largest event was a M 8.1 Guam earthquake on August 8, 1993, which caused extensive damage to that island and was felt on Saipan. Intermittent seismic activity continues to occur in the Anatahan-Sarigan, Guguan-Alamagan-Pagan, and PaganAgrihan-Asuncion areas. Mount Pagan volcano was actively erupting ash during our 11 days on the island of Pagan. We were able to document seismicity and ground deformation associated with this volcanic activity. None of the other subaerial volcanoes in the chain showed signs of eruptive activity during our visit, but an overflight in a fixed-wing aircraft by geologist Richard Moore and CNMI Lieutenant Governor Jesus Borja detected an apparent submarine eruption between Farallon de Pajaros (also known as Uracas or Uracus) and Maug. The only surveillance of the three uninhabited islands of Farallon de Pajaros, Maug, and Sarigan was by aerial reconnaissance. Geologists studied the other six islands in greater detail by field mapping and aerial surveillance. Electronic distance measurement (EDM) permanent-glass monitor lines were measured on Agrihan, Pagan, and Anatahan. The majority of line-length changes on Agrihan were insignificant (<16 mm). Mount Pagan's south EDM monitor was reestablished, and 1994 results, compared with 1983 measurements, show large changes associated with renewed volcanic activity. Contractions of 59 mm (stations INS to REF) and 157 mm (stations INS to MID) were measured on the south monitor. The southwest Pagan EDM monitor showed a 56 mm contraction for the same period (stations PAGAN 1 to RIDGE 2). Line-length change of this sense and magnitude usually indicates that inflation has occurred in the volcano. Measurements during the 1994 visit to Pagan Island showed no significant changes (for all measurements made during April-May 1994). Anatahan also showed changes as large as -50 mm, accumulated over a time span of approximately two years. Temperatures and pH values of hot spring waters on Agrihan, Pagan, and Anatahan and fumaroles on Agrihan and Anatahan were measured. The temperature data indicated no significant change in the state of these volcanoes since 1992. We collected warm spring water from Lagoonam Sanhalom (Inland Lake) near Mount Pagan. In addition, we started geologic mapping on Asuncion and Guguan, collected charcoal to date three eruptions of Mount Pagan, and collected rocks on Asuncion, Guguan, Pagan, and Alamagan for petrographic and chemical studies. We conclude that the low and infrequent shallow seismicity, lack of significant deformation, and low fumarole temperatures suggest that no eruption is likely soon on Agrihan and Alamagan. Anatahan's deformation pattern continues to behave in an erratic manner. Because f the lack of seismicity, it seems unlikely that an eruption of Anatahan will occur soon. The persistent volcanic tremor and significant EDM changes on Mount Pagan mean that small explosive eruptions will continue to occur.

Mariana Islands↗
USGS1995

Real-Time Mapping alert system; characteristics and capabilities

The U.S. Geological Survey has an extensive hydrologic network that records and transmits precipitation, stage, discharge, and other water-related data on a real-time basis to an automated data processing system. Data values are recorded on electronic data collection platforms at field sampling sites. These values are transmitted by means of orbiting satellites to receiving ground stations, and by way of telecommunication lines to a U.S. Geological Survey office where they are processed on a computer system. Data that exceed predefined thresholds are identified as alert values. The current alert status at monitoring sites within a state or region is of critical importance during floods, hurricanes, and other extreme hydrologic events. This report describes the characteristics and capabilities of a series of computer programs for real-time mapping of hydrologic data. The software provides interactive graphics display and query of hydrologic information from the network in a real-time, map-based, menu-driven environment.

Open-File Report↗
USGS1996

Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory-Determination of semivolatile organic compounds in bottom sediment by solvent extraction, gel permeation chromatographic fractionation, and capillary-column gas chromatography/mass spectrometry

A method for the determination of 79 semivolatile organic compounds (SOCs) and 4 surrogate compounds in soils and bottom sediment is described. The SOCs are extracted from bottom sediment by solvent extraction, followed by partial isolation using high-performance gel permeation chromatography (GPC). The SOCs then are qualitatively identified and quantitative concentrations determined by capillary-column gas chromatography/mass spectrometry (GC/MS). This method also is designed for an optional simultaneous isolation of polychlorinated biphenyls (PCBs) and organochlorine (OC) insecticides, including toxaphene. When OCs and PCBs are determined, an additional alumina- over-silica column chromatography step follows GPC cleanup, and quantitation is by dual capillary- column gas chromatography with electron-capture detection (GC/ECD). Bottom-sediment samples are centrifuged to remove excess water and extracted overnight with dichloromethane. The extract is concentrated, centrifuged, and then filtered through a 0.2-micrometer polytetrafluoro-ethylene syringe filter. Two aliquots of the sample extract then are quantitatively injected onto two polystyrene- divinylbenzene GPC columns connected in series. The SOCs are eluted with dichloromethane, a fraction containing the SOCs is collected, and some coextracted interferences, including elemental sulfur, are separated and discarded. The SOC-containing GPC fraction then is analyzed by GC/MS. When desired, a second aliquot from GPC is further processed for OCs and PCBs by combined alumina-over-silica column chromatography. The two fractions produced in this cleanup then are analyzed by GC/ECD. This report fully describes and is limited to the determination of SOCs by GC/MS.

Open-File Report↗
USGS1996

Real-Time Mapping alert system; user's manual

The U.S. Geological Survey has an extensive hydrologic network that records and transmits precipitation, stage, discharge, and other water- related data on a real-time basis to an automated data processing system. Data values are recorded on electronic data collection platforms at field monitoring sites. These values are transmitted by means of orbiting satellites to receiving ground stations, and by way of telecommunication lines to a U.S. Geological Survey office where they are processed on a computer system. Data that exceed predefined thresholds are identified as alert values. These alert values can help keep water- resource specialists informed of current hydrologic conditions. The current alert status at monitoring sites is of critical importance during floods, hurricanes, and other extreme hydrologic events where quick analysis of the situation is needed. This manual provides instructions for using the Real-Time Mapping software, a series of computer programs developed by the U.S. Geological Survey for quick analysis of hydrologic conditions, and guides users through a basic interactive session. The software provides interactive graphics display and query of real-time information in a map-based, menu-driven environment.

Open-File Report↗
USGS1996

MUDMASTER: A Program for Calculating Crystalline Size Distributions and Strain from the Shapes of X-Ray Diffraction Peaks

Particle size may strongly influence the physical and chemical properties of a substance (e.g. its rheology, surface area, cation exchange capacity, solubility, etc.), and its measurement in rocks may yield geological information about ancient environments (sediment provenance, degree of metamorphism, degree of weathering, current directions, distance to shore, etc.). Therefore mineralogists, geologists, chemists, soil scientists, and others who deal with clay-size material would like to have a convenient method for measuring particle size distributions. Nano-size crystals generally are too fine to be measured by light microscopy. Laser scattering methods give only average particle sizes; therefore particle size can not be measured in a particular crystallographic direction. Also, the particles measured by laser techniques may be composed of several different minerals, and may be agglomerations of individual crystals. Measurement by electron and atomic force microscopy is tedious, expensive, and time consuming. It is difficult to measure more than a few hundred particles per sample by these methods. This many measurements, often taking several days of intensive effort, may yield an accurate mean size for a sample, but may be too few to determine an accurate distribution of sizes. Measurement of size distributions by X-ray diffraction (XRD) solves these shortcomings. An X-ray scan of a sample occurs automatically, taking a few minutes to a few hours. The resulting XRD peaks average diffraction effects from billions of individual nano-size crystals. The size that is measured by XRD may be related to the size of the individual crystals of the mineral in the sample, rather than to the size of particles formed from the agglomeration of these crystals. Therefore one can determine the size of a particular mineral in a mixture of minerals, and the sizes in a particular crystallographic direction of that mineral.

Open-File Report↗
USGS1997

Sand-storage changes in the Colorado River downstream from the Paria and Little Colorado rivers, April 1994 to August 1995

Sixty-six cross sections on the Colorado River in 11-kilometer reachesdownstream from the Paria and Little Colorado Rivers were monitoredfrom June 1992 to August 1995 to provide data to evaluate the effectof releases from Glen Canyon Dam on channel-sand storage and fordevelopment of multidimensional flow and sediment-transport models.Most of the network of monumented cross sections was established andfirst measured JuneSeptember 1992. Data collected from June 1992through February 1994 were published in a previous report. Crosssections downstream from the Paria River were remeasured six timesbetween April 1994 and August 1995. Most sections downstream from theLittle Colorado River were remeasured four times in the same timeperiod. Each measurement consisted of 10 passes across the section,and data presented are the mean section and the standard deviationfrom the mean. Measured depths were converted to bed elevations usingwater-surface elevations measured or estimated for each reach. A linemarked at regular intervals was strung across the river between thesection end points and used to provide horizontal-position control. AWilcoxon rank-sum test was applied to the data, and bed-elevationdifferences between successive measurements that were statisticallysignificant at the 5-percent significance level were identified andused to compute the difference in cross-sectional area frommeasurement to measurement. Changes in sand storage computed forselected cross sections are presented. Changes in area at most of theselected cross sections during the period presented in this reportwere smaller than those measured during the period covered bythe previous report. The largest changes over the monitoring periodpresented in this report were measured at section p22 (+115 squaremeters) downstream from the Paria River and at sections lb1 (+209square meters) and lc2 (156 square meters) downstream from theLittle Colorado River. This report presents selected data from themeasurements made from April 1994 through August 1995 in graphicalform and describes the electronic form of the entire data set.

Open-File Report↗