USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of the American Water Resources Association”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,691 records · Page 72Linked to original sources
USGS2025

False positives in the identification of dynamic earthquake triggering

Dynamic earthquake triggering is commonly identified through the temporal correlation between increased seismicity rates and global earthquakes that are possible triggering events. However, correlation does not imply causation. False positives may occur when unrelated seismicity rate changes coincidently occur at around the time of candidate triggers. We investigate the expected false positive rate in Southern California with global M ≥ 6 earthquakes as candidate triggers. We compute the false positive rate by applying the statistical tests used by DeSalvio and Fan (2023), https://doi.org/10.1029/2023jb026487 to synthetic earthquake catalogs with no real dynamic triggering. We find a false positive rate of ∼3.5%–8.5% when realistic earthquake clustering is present, consistent with the 95% confidence typically used in seismology. However, when this false positive rate is applied to the tens of thousands of spatial-temporal windows in Southern California tested in DeSalvio and Fan (2023), https://doi.org/10.1029/2023jb026487 , thousands of false positives are expected. The expected false positive occurrence is large enough to explain the observed apparent triggering following 70% of large global earthquakes (DeSalvio & Fan, 2023, https://doi.org/10.1029/2023jb026487 ), without requiring any true dynamic triggering. Aside from the known triggering from the nearby El Mayor-Cucapah, Mexico, earthquake, the spatial and temporal characteristics of the reported triggering are indistinguishable from random false positives. This implies that best practice for dynamic triggering studies that depend on temporal correlation is to estimate the false positive rate and investigate whether the observed apparent triggering is distinguishable from the correlations that may occur by chance.

JGR Solid Earth↗
USGS2025

Evaluating Laramide orogenesis via flexural basin response in the San Juan basin, New Mexico and Colorado

A challenge in interpreting the location, timing, and magnitude of ancient orogenic events is that ongoing uplift and erosion in the hinterlands often destroys much of the primary record of these events. However, basin-thickness patterns in the sedimentary record can provide complimentary evidence of uplift via flexural effects. Here, we deploy well-log correlation, isochores, basin modeling, flexural modeling, and subcrop mapping to evaluate the Late Cretaceous to Paleogene basin response to Laramide tectonism in the San Juan basin. A wedge of upper Campanian to Maastrichtian sedimentary rock thickens from 200 to 800 meters from southeast to northwest in the basin. This pattern can be successfully simulated via flexural modeling if we infer early Laramide uplift along the northwest basin flank that produced a 0.8 km high topographic load. The Laramide unconformity bounds the top of this Upper Cretaceous sedimentary wedge and truncates progressively older strata to the east, further supporting a westward tilt of the basin. The onset of Campanian Laramide flexure may have also contributed to the profound transgression from the upper Menefee Formation to the Lewis Shale. The Paleocene isochore map displays an approximately symmetrical pattern, with thickening towards the center of the basin. This suggests the possibility of competing flexural loads. The base Eocene structure indicates an asymmetric deep on the northeast flank of the basin, providing flexural evidence of contemporaneous uplift/loading of the Nacimiento uplift and Archuleta arch; this has been modeled as ~2.1 km load height. Both Cretaceous and Paleocene sedimentary wedges are narrow, suggesting low flexural rigidity; modeled effective elastic thicknesses (EET) are 20-30 km, comparable to estimates of modern EET for the region.

Colorado, New Mexico↗
USGS2024

Repeated coseismic uplift of coastal lagoons above the Patton Bay Splay Fault System, Montague Island, Alaska, USA

Coseismic slip on the Patton Bay splay fault system during the 1964 M w 9.2 Great Alaska Earthquake contributed to local tsunami generation and vertically uplifted shorelines as much as 11 m on Montague Island in Prince William Sound (PWS). Sudden uplift of 3.7–4.3 m caused coastal lagoons along the island's northwestern coast to gradually drain. The resulting change in depositional environment from marine lagoon to freshwater muskeg created a sharp, laterally continuous stratigraphic contact between silt and overlying peat. Here, we characterize the geomorphology, sedimentology, and diatom ecology across the 1964 earthquake contact and three similar prehistoric contacts within the stratigraphy of the Hidden Lagoons locality. We find that the contacts signal instances of abrupt coastal uplift that, within error, overlap the timing of independently constrained megathrust earthquakes in PWS—1964 Common Era, 760–870 yr BP, 2500–2700 yr BP, and 4120–4500 yr BP. Changes in fossil diatom assemblages across the inferred prehistoric earthquake contacts reflect ecological shifts consistent with repeated draining of a lagoon system caused by >3 m of coseismic uplift. Our observations provide evidence for four instances of combined megathrust-splay fault ruptures that have occurred in the past ∼4,200 years in PWS. The possibility that 1964-style combined megathrust-splay fault ruptures may have repeated in the past warrants their consideration in future seismic and tsunami hazards assessments.

Alaska↗
USGS2024

Bathymetric and velocimetric surveys at highway bridges crossing the Missouri and Mississippi Rivers on the periphery of Missouri, June 13–22, 2022

Bathymetric and velocimetric data were collected by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, near seven bridges at six highway crossings of the Missouri and Mississippi Rivers on the periphery of Missouri from June 13–22, 2022. A multibeam echosounder mapping system was used to obtain channel-bed elevations for river reaches about 1,640 feet longitudinally and generally extending laterally across the active channel from bank to bank during minor flood-flow conditions. These surveys provided channel geometry and hydraulic conditions at the time of the surveys and provided characteristics of scour holes that may be useful in developing or verifying predictive guidelines or equations for computing potential scour depth. These data also may be useful to the Missouri Department of Transportation as a minor flood-flow assessment of the bridges for stability and integrity issues with respect to bridge scour during floods. Bathymetric data were collected around every in-channel pier. Scour holes were present at most piers for which bathymetry could be obtained, except those on banks or surrounded by riprap. Occasionally, scour holes were minor and difficult to discern from nearby dunes and ripples. All bridge sites in this study were surveyed and documented in previous studies. Although partial exposure of substructural support elements was observed at several piers, at most sites the exposure most likely is minimal compared to the overall substructure that remains buried in bed material at these piers. The notable exceptions are piers 12 and 13 at structure L0135 on State Highway 51 at Chester, Illinois, where the bedrock material was fully exposed around the piers. The average difference between the bathymetric surfaces between 2022 and 2018 varied from 0.41 foot higher to 1.86 feet lower. Between 2022 and 2014, the average difference between the bathymetric surfaces varied from 1.02 feet higher to 4.69 feet lower. Only the two sites on the Missouri River and the Caruthersville site were surveyed in 2011; for those sites, the average difference between the bathymetric surfaces varied from 5.83 feet higher to 1.34 feet lower. The most substantial overall net gain of sediment in a reach was between 2011 and 2022 at structure A1700 near Caruthersville, Mo. (site 38). This result was expected because structure A1700 is downstream from the confluences of the Missouri and Ohio Rivers, and therefore subject to the largest streamflows, the largest streamflow fluctuations, and the most substantial sediment flux, as has historically been observed at this site. The presence of riprap blankets, pier size and nose shape, and alignment to flow had a substantial effect on the size of the scour hole observed for a given pier. Piers that were surrounded by riprap blankets had scour holes that were substantially smaller (to nonexistent) compared to piers at which no rock or riprap were present. New riprap blankets were surveyed at pier 3 of structure L0098 at Brownville, Nebraska, and at piers 15–18 of structure A1700 near Caruthersville, Mo., that effectively mitigated the scour holes historically observed at these piers. Narrow piers having round or sharp noses that were aligned with flow often had scour holes that were difficult to discern from nearby bed features, whereas piers having wide or blunt noses resulted in larger, deeper scour holes. Several of the structures had piers that were skewed to primary approach flow. Scour holes near these piers consistently displayed greater depth on the side of the pier with impinging flow and deposition on the leeward side of the pier.

Missouri↗
USGS2024

Development of USGS NSHMs: Do small changes in hazard imply small changes in risk?

One of the flagship products from the U.S. Geological Survey (USGS) is the National Seismic Hazard Model (NSHM). Since 1976, the NSHM has been periodically updated to reflect newly published earthquake science and provide probabilistic estimates of seismic hazard for the United States. During each update cycle, alternative models are deliberated, analyzed, and documented through logic trees and their corresponding logic tree branch weights. For example, the decision to modify a logic tree branch weight may be influenced by sensitivity analyses of the logic tree branches in their effects on the mean hazard. However, do small changes in traditional measures of hazard imply small changes in risk? In this study, we make use of two update cycles of the USGS NSHMs and a National Bridge Inventory (NBI) from the Federal Highway Administration (FHWA) to explore the preceding question. Specifically, we first identify geographic locations in the conterminous United States in which the change in hazard from one cycle to another is relatively small. Next, we model the seismic risk to highway bridges for these locations and for each update cycle, while simultaneously distinguishing low hazard environments from high hazard environments. These data enable quantitative analysis of how much changes in risk can be expected given small changes in hazard, investigating the importance of risk models in decision-making during development of the USGS NSHMs.

Conference Paper↗
USGS2025

Using subducting plate motion to constrain Cascadia slab geometry and interface strength

Subduction zones are home to multiple geohazards driven by the evolution of the regional tectonics, including earthquakes, volcanic eruptions and landslides. Past evolution builds the present-day structure of the margin, while the present-day configuration of the system determines the state-of-stress in which individual hazardous events manifest. Regional simulations of subduction zones provide a tool to synthesize the tectonic history of a region and investigate how geologic features lead to variations in the state of stress across the subduction system. However, it is challenging to design regional models that provide a force-balance that is consistent with the large-scale motion of surrounding tectonic plates while also not over-constraining the solution. Here, we present new models for the Cascadia subduction zone that meet these criteria and demonstrate how the motion of the subducting Juan de Fuca plate can be used to determine the along-strike variations in the viscous (long-term) coupling across the plate boundary. All successful models require lower viscous coupling in the northern section of the trench compared to the central and southern sections. However, due to uncertainties in the geometry of the Cascadia slab, we find that there is a trade-off between along-strike variation in viscous coupling and slab shape. Better constraints on the slab shape, and/or use of other observations are needed to resolve this trade-off. The approach presented here provides a framework for further exploring how geologic features in the overriding plate and the properties of the plate boundary region affect the state-of-stress across this and other subduction zones.

Cascadia subduction zone↗
USGS2024

Evaluation of an open earthquake early warning system in Mexico, and laboratory tests of their sensors

Microelectromechanical system (MEMS) accelerometers are useful for seismological and engineering applications because of their ability to record unsaturated large seismic signals. Recent advances in MEMS technologies enable the design of instruments with improved capabilities that also allow the recording of small signals. As a result, MEMS can be useful across a broad dynamic range and for both major earthquakes and smaller magnitude events. Here, we analyze the performance of a MEMS‐based accelerometer with the capability of real‐time data transmission. We discuss the self‐noise level, dynamic range, and sensitivity, along with the timing precision and data transmission latency, and compare these parameters to other MEMS‐based instruments. We also summarize observations from a regional network deployed in southern Mexico over a period of 3+ yr for the purpose of earthquake early warning. In addition to the sensor evaluation, we present a large, openly available data set of strong motion data from the Mexican network that comprises continuous ground‐motion records from 24 accelerometers in the period between 2017 and 2022.

Seismological Research Letters↗
USGS2026

Tringa flavipes (Lesser Yellowlegs) from separate breeding sites subdivides the Prairie Pothole Region in space and time during southbound migration

Some staging regions support multiple groups of the same migratory species, each of which may use the region differently. Characterizing the ways, in which separate groups use such regions can therefore help to identify vulnerabilities during this sensitive period of the annual cycle. The Prairie Pothole Region (PPR) is a massive wetland complex in the northern Great Plains of North America used by ∼11 million shorebirds during migration. The PPR has been heavily modified by agriculture and is experiencing varied effects of global climate change, threatening the health of the shorebirds that rely on it. Here, we used 6 seasons of southbound tracking data of Tringa flavipes (Lesser Yellowlegs)—a long-distance migratory shorebird species with an estimated population decline of 63% over the last 4 decades—from 9 sites across their breeding range to explore differences in migratory behavior within this important staging region. We found that 75% of tracked individuals used the region during southbound migration, and T. flavipes from different breeding sites detoured 110–875 km from their most direct migratory route to access the PPR. Individuals that arrived later stayed longer and made more stops within the region than those that arrived early. Individuals originating from different breeding sites also displayed spatial and temporal segregation within the region: T. flavipes from southwest and central Alaska relied heavily on the northwestern PPR, while those from Canada used the central and southeastern portions of the PPR. Finally, timing of use varied among groups, but the southeastern PPR became increasingly important over the course of the southbound migratory window, as other wetlands likely dried out. Our study highlights the portions of the PPR of critical importance to migrating T. flavipes and the diversity of ways, in which different groups from within the same species can use a single staging region.

Alaska, Manitoba, Northwest Territories, Ontario, ↗
USGS2025

Late Pleistocene kinematics of the Great Southern Puerto Rico Fault Zone, Puerto Rico

Several onshore faults in southern Puerto Rico have recently been recognized as Quaternary active. However, the kinematics of these faults, particularly any lateral component, remain largely unconstrained. It is difficult to characterize low strain‐rate faults, partially due to extensive erosional and anthropogenic landscape modification, steep relief, and frequent landsliding, limiting the preservation of geomorphic features that could serve as recorders of fault motion. Here, we constrain the kinematics along sections of the Great Southern Puerto Rico Fault Zone (GSPRFZ) on the southern coastal plain of Puerto Rico. We integrate ∼1‐m‐resolution light detection and ranging (lidar)‐derived topography, historical air photos, and field mapping to identify a series of ∼50–1200‐m‐long fault scarps and lineaments that trend northwest–southeast and extend for ≥25 km across the southern coastal plain. Fault scarps are primarily south facing, cut across topography, and displace Quaternary deposits and landforms. We document multiple offset geomorphic markers, including channel thalwegs and interfluves formed in deposits previously mapped as Quaternary piedmont alluvial plain. We observe both vertical (south‐side‐down) and right‐lateral meter‐scale displacements, which indicate that the GSPRFZ accommodates right‐lateral oblique motion in the late Pleistocene, consistent with northeast motion of the Puerto Rico and the Virgin Islands microplate away from the Hispaniola block.

Puerto Rico↗
USGS2025

Nanometer-scale relationships between sedimentary organic matter molecular composition, fluorescence, cathodoluminescence, and reflectance: The importance of oxygen content at low thermal maturities

Molecular characterization of sedimentary organic matter (SOM), termed macerals, is a common goal when seeking to understand petroleum generation as well as other geologic processes in deep time. However, unambiguous measurement of discrete macerals is challenging due to the small size of organic particles in sedimentary rocks, the proximity of different organic matter types to one another, mineral-organic matter interactions, and maceral mixing that occurs during SOM isolation prior to ex situ analysis. The recent advent of infrared spectrometers capable of nanometer-scale resolution and the application of these technologies to geologic samples has enabled advances in rapid, in situ molecular characterization of SOM allowing for insights into paleoenvironmental processes, such as organic matter productivity and preservation, among others. Here we employ one such technology, optical photothermal infrared (OPTIR) spectroscopy, to map SOM functional group distributions at 500-nm resolution in a sample from the Lower Cretaceous Sunniland Limestone of the South Florida Basin. Examined fields of view include occurrences of amorphous organic matter (AOM), inertinite, micrinite, solid bitumen, telalginite, and vitrinite. OPTIR data from these macerals are compared against traditional organic petrographic data from the same organic grains including fluorescence intensity and white light reflectance as well as against cathodoluminescence response, an emerging organic petrographic approach. Maceral oxygen content (using carbonyl functional group abundance as a proxy) is observed to vary widely between maceral types but correlates strongly with fluorescence and cathodoluminescence intensity as well as against reflectance. These findings highlight the important role that oxygen content plays in determining the optical properties of SOM and further demonstrate the ability of OPTIR to discriminate subtle molecular differences between SOM types.

Organic Geochemistry↗
USGS2024

Geologic map of Scoggins Dam, Henry Hagg Lake, and Scoggins Valley, Washington County, Oregon

New geologic mapping (Wells and others, 2020b) and geophysical mapping (Blakely and others, 2000; McPhee and others, 2014; Wells and others, 2020a) document kilometers of Cenozoic right-lateral offset along the Gales Creek Fault Zone, a major, northwest-striking fault zone forming the boundary between the Tualatin Valley and the Coast Range. The Bureau of Reclamation’s (Reclamation) Scoggins Dam (fig. 1), in the Coast Range foothills west of Forest Grove, Oregon, lies within the Gales Creek Fault Zone as mapped by Wells and others (2020a, 2020b; fig. 2). Active faults of the Gales Creek Fault Zone defined by paleoseismic trenching (Redwine and others, 2017, 2019b, Horst and others, 2018, 2019, 2021, and Wells and others, 2020a) are presently mapped as projecting through the existing dam. The Pacific Northwest Region of Reclamation requested assistance with geologic studies around Scoggins Dam to provide better understanding of fault locations and their activity, which are needed to design a modification of the dam (Maguire, 2019a, b). The scope of this project includes detailed geology of the existing Scoggins Dam site, Henry Hagg Lake, the reservoir behind the dam, and Scoggins Valley downstream of the existing dam, particularly around a potential new dam site, where Scoggins Creek cuts through a narrow gap formed by a resistant felsic tuff bed that crosses the valley.

Oregon↗
USGS2024

A journey to the center of the USGS National Strong-motion Project processing and beyond

The United States Geological Survey (USGS) National Strong Motion Project (NSMP) has the primary U.S. government responsibility to acquire, process, and disseminate significant strong-motion earthquake ground motion records measured at surficial free-field stations, structures (buildings, dams, and bridges, and geotechnical arrays to the earthquake engineering community. As a result of the deployment of modern seismic instrumentation and growth of tools such as web-services, earthquake data from U.S. and international seismic networks are more accessible than ever. Our mission is to provide raw and processed strong-motion waveforms with PGA values greater than 0.1%g for M3.0 earthquakes and larger in California and M4.0 and larger within the conterminous US, Hawaii, Puerto Rico, and Alaska. Datasets of interest to the engineering and geophysics communities, such as event sequences in areas of induced seismicity and significant global events, are also processed and posted at the Center for Engineering Strong Motion Data (CESMD) at strongmotioncenter.org when available through collaboration with the international strong-motion data community. Here we outline (1) the NSMP’s current workflow to acquire, process, and distribute data at CESMD; (2) our new endeavours and collaborations focusing on comparison and integration of waveform processing software, development of techniques for metadata quality checks before and after earthquakes, and construction of a dynamic site characterization repository; and (3) our topics for possible collaboration topics across the global strong-motion community.

Conference Paper↗
USGS2025

Impact of land subsidence on housing sale values: Evidence from the San Joaquin Valley, California

This study assesses the impact of land subsidence on housing sale values in the San Joaquin Valley, California. The study utilizes home sale transactions and vertical land-surface displacement data from Interferometric Synthetic Aperture Radar techniques. Using fine-scale fixed effects, matching, as well as a repeat-sales approach, our results indicate that land subsidence resulted in a 2.4% to 5.8% reduction in housing sale values, with the largest reductions occurring in areas where substantial subsidence occurred. Such findings may have implications for groundwater management and can potentially help inform policy design to help mitigate the causes and impacts of land subsidence.

California↗
USGS2026

Dynamic drainage reorganization in Eastern Tibet: Insights from the Yangtze River first bend

The modern drainage network of eastern Tibet is widely believed to have developed through a series of river capture and flow reversal events; however, the timing and mechanisms driving this reorganization remain contentious. Among these events, the river capture that formed the First Bend of the Yangtze River (YFB) stands out as both iconic and particularly debated. Here we present sedimentary provenance data from the Late Miocene–Quaternary Dali Basin, located south of the YFB, which indicate that a southward-flowing Jinsha River (i.e., the present-day upper Yangtze River) sourced sediment to the Dali basin at ∼7.4–6.4 Ma in a drainage configuration different from that of today. Because this interval postdates the initial establishment of a near-modern Jinsha River system prior to the Miocene, our results imply at least two discrete fluvial reorganizations occurred at the YFB—one preceding ∼7.4 Ma and another following ∼6.4 Ma. By integrating these findings with landscape evolution modeling, we infer that the initiation of rapid uplift of the Yulong-Haba Mountains and the Diancang Shan may have been responsible for these drainage reorganizations. These results underscore that Cenozoic drainage systems on the eastern Tibetan Plateau have evolved dynamically on a short timescale of ∼10 5 –10 6 -year, rather than remaining in a long-term stationary configuration on ∼10 7 -year timescales.

eastern Tibetan Plateau, first bend of the Yangtze↗
USGS2026

Testing characteristic magnitude distributions in modern PSHA models

The characteristic magnitude distribution hypothesis predicts a higher rate of large earthquakes than a Gutenberg–Richter extrapolation of the small‐earthquake rate would imply. Characteristic magnitude distributions have been commonly applied to faults in probabilistic seismic hazard analysis (PSHA), and in modern models they can emerge from the way short‐term seismicity constraints are combined with long‐term geologic and geodetic constraints. We test the characteristic magnitude distribution hypothesis by comparing the fault‐based magnitude distributions from the 2023 update to the National Seismic Hazard Model (NSHM23) in the Western United States with observed seismicity over the past 93 yr. We find that observed magnitude distributions fall outside the model‐predicted confidence bounds in regions where NSHM23 produces characteristic magnitude distributions: in these regions, the model predicts higher rates of large earthquakes than are observed. An analysis of the earlier California model (Uniform California Earthquake Rupture Forecast, version 3) also reveals discrepancies between the modeled and observed magnitude distributions. In addition, we find that observed magnitude distributions near modeled faults are not significantly different from those in background regions. These results challenge the prevalence of characteristic magnitude distributions in fault‐based seismic hazard models and call for a reassessment of how disparate data sets are integrated in PSHA.

western United States↗
USGS2026

The U.S. Geological Survey 2025 Puerto Rico and U.S. Virgin Islands time-independent earthquake rupture forecast

We present the 2025 U.S. Geological Survey Puerto Rico and U.S. Virgin Islands (PRVI) time‐independent earthquake rupture forecast (ERF), developed for the 2025 update to the National Seismic Hazard Model (NSHM) for PRVI. The updated ERF improves upon a prior model from 2003, including an expanded fault inventory with slip‐rate estimates, updated seismicity catalogs, and refined subduction zone geometries and deformation models. It applies the fault‐system inversion methodology to solve for rates of ruptures on modeled faults, adapted from the 2023 NSHM (NSHM23) for the western United States, including the first application of the inversion to model rates on a U.S. subduction interface. Off‐fault and intraslab seismicity are constrained by observed seismicity and use updated methods developed for NSHM23. Uncertainties in model components are substantial, and the ERF represents epistemic uncertainties through a comprehensive logic tree consisting of 1.7 billion logic‐tree branches combined across all sources.

Puerto Rico, U.S. Virgin Islands↗
USGS2025

Invited perspectives: Integrating hydrologic information into the next generation of landslide early warning systems

Although rainfall-triggered landslides are initiated by subsurface hydro-mechanical processes related to the loading, weakening, and eventual failure of slope materials, most landslide early warning systems (LEWS) have relied solely on rainfall event information. In previous decades, several studies demonstrated the value of integrating proxies for subsurface hydrologic information to improve rainfall-based forecasting of shallow landslides. More recently, broader access to commercial sensors and telemetry for real-time data transmission has invigorated new research into hydrometeorological thresholds for LEWS. Given the increasing number of studies across the globe using hydrologic monitoring, mathematical modeling, or both in combination, it is now possible to make some insights into the advantages versus limitations of this approach. The extensive progress demonstrates the value of in situ hydrologic information for reducing both failed and false alarms, through the ability to characterize infiltration during, as well as the drainage and drying processes between major storm events. There are also some areas for caution surrounding the long-term sustainability of subsurface monitoring in landslide-prone terrain, as well as unresolved questions in hillslope hydrologic modeling, which relies heavily on the assumptions of diffuse flow and vertical infiltration but often ignores preferential flow and lateral drainage. Here, we share a collective perspective based on our previous collaborative work across Europe, North America, Africa, and Asia to discuss these challenges and provide some guidelines for integrating knowledge of hydrology and climate into the next generation of LEWS. We propose that the greatest opportunity for improvement is through a measure-and-model approach to develop an understanding of landslide hydro-climatology that accounts for local controls on subsurface storage dynamics. Additionally, new efforts focused on the subsurface hydrology are complementary to existing rainfall-based methods, so leveraging these with near-term precipitation forecasts is a priority for increasing lead times.

Alaska↗
USGS2024

StreamStats—A quarter century of delivering web-based geospatial and hydrologic information to the public, and lessons learned

StreamStats is a U.S. Geological Survey (USGS) web application that provides streamflow statistics, such as the 1-percent annual exceedance probability peak flow, the mean flow, and the 7-day, 10-year low flow, to the public through a map-based user interface. These statistics are used in many ways, such as in the design of roads, bridges, and other structures; in delineation of floodplains for land-use zoning and setting of insurance rates; for regulatory purposes, such as the permitting of wastewater discharges; and for hydrologic and climate change studies. StreamStats was first developed for Massachusetts and released in 2001. The application provided users with the ability to obtain streamflow statistics computed from data collected at USGS streamgages and to obtain estimates of streamflow statistics for user-selected ungaged sites. Massachusetts StreamStats used geographic information system software and digital mapping to compute drainage-basin characteristics, which were then used in statistical models to estimate streamflow statistics for the user-selected sites. The statistical models were in the form of equations that were developed through a process known as regression analysis. StreamStats was the first known web application with the ability to do interactive geoprocessing. The utility of Massachusetts StreamStats was instantly apparent, leading the USGS to develop a version of StreamStats that could be implemented nationally. USGS State offices normally were required to develop custom regression equations and prepare local digital mapping data needed for implementing StreamStats for their States. Funding needed to complete this work usually was provided through cooperative agreements between the USGS and State agencies. In 2004, Idaho became the first to be released in the national version of StreamStats. By 2023, 44 States were fully implemented and six were undergoing implementation. StreamStats has undergone many modifications over the years to keep up with changes to the underlying software and to add functionality. Customized functionality and separate linked StreamStats applications were developed for several States. Meeting the high demand for additions and improvements to StreamStats while also adhering to budgetary constraints has, at times, been challenging. The StreamStats development team has identified numerous additional improvements that could be made to provide better performance and more functionality. The lessons learned from the experience of building and operating StreamStats for nearly 25 years could be relevant to others interested in pursuing efforts of a similar scale.

Circular↗