SEARCH · USGS Science

Results for “The Alaska Miner”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71Linked to original sources

USGS2002

Mesozoic thermal history and timing of structural events for the Yukon-Tanana Upland, east-central Alaska: 40Ar/39Ar data from metamorphic and plutonic rocks

We present new 40 Ar/ 39 Ar ages for hornblende, muscovite, and biotite from metamorphic and plutonic rocks from the YukonTanana Upland, Alaska. Integration of our data with published 40 Ar/ 39 Ar, kinematic, and metamorphic pressure ( P ) and temperature ( T ) data confirms and refines the complex interaction of metamorphism and tectonism proposed for the region. The oldest metamorphic episode(s) postdates Middle Permian magmatism and predates the intrusion of Late Triassic (215212 Ma) granitoids into the Fortymile River assemblage (Taylor Mountain assemblage of previous papers). In the eastern Eagle quadrangle, rapid and widespread Early Jurassic cooling is indicated by ~188186 Ma 40 Ar/ 39 Ar plateau ages for hornblende from plutons that intrude the Fortymile River assemblage, and for metamorphic minerals from the Fortymile River assemblage and the structurally underlying Nasina assemblage. We interpret these Early Jurassic ages to represent cooling resulting from northwest-directed contraction that emplaced the Fortymile River assemblage onto the Nasina assemblage to the north as well as the Lake George assemblage to the south. This cooling was the final stage of a continuum of subduction-related contraction that produced crustal thickening, intermediate- to high- P metamorphism within both the Fortymile River assemblage and the structurally underlying Lake George assemblage, and Late Triassic and Early Jurassic plutonism in the Fortymile River and Nasina assemblages. Although a few metamorphic samples from the Lake George assemblage yield Jurassic 40 Ar/ 39 Ar cooling ages, most yield Early Cretaceous 40 Ar/ 39 Ar ages: hornblende ~135115 Ma, and muscovite and biotite ~110108 Ma. We interpret the Early Cretaceous metamorphic cooling, in most areas, to have resulted from regional extension and exhumation of the lower plate, previously tectonically thickened during Early Jurassic and older convergence.

Alaska↗

USGS2007

The biogeochemistry and occurrence of unusual plant species inhabiting acidic, metal-rich water, Red Mountain, Bonnifield district, Alaska Range

This report presents results on the occurrence and biogeochemistry of unusual plant species, and of their supporting sediment, in an undisturbed volcanogenic massive sulfide deposit in the Tintina Gold Province (see fig. 1 of Editors’ Preface and Overview). The extraordinary plant assemblage found growing in the acidic metal-rich waters that drain the area is composed predominantly of bryophytes (liverworts and mosses). Ferricrete-cemented silty alluvial sediments within seeps and streams are covered with the liverwort Gymnocolea inflata, whereas the mosses Polytrichum commune and P. juniperinum inhabit the area adjacent to the water and within the splash zone. Both the liverwort-encrusted sediment and Polytrichum thalli have high concentrations of major- and trace-metal cations (for example, Al, As, Cu, Fe, Hg, La, Mn, Pb, and Zn). Soils in the area do not reflect the geochemical signature of the mineral deposit, and we suspect that they are most influenced by the chemistry of airborne dust (aeolian material) derived from outside the area.

Alaska, Yukon↗

USGS2014

Structural control of ore deposition at Kasaan Peninsula, southeastern Alaska

Copper‐bearing magnetite deposits and associated copper deposits at Kasaan Peninsula , Prince of Wales Island, southeastern Alaska , have been known for many years and have been mined to some extent for their copper content. At the beginning of World War II, the development of war industries in the Pacific northwest focused attention on the deposits as possible sources of iron ore . From 1942 through 1944 the United States Geological Survey made detailed studies of most of the ore deposits and at a few of the more promising localities diamond‐drilling operations were carried on by the United States Bureau of Mines. The deposits are for the most part small and irregular but of relatively high grade. The chief ore minerals are magnetite, pyrite, and chalcopyrite, and the gangue consists largely of skarn minerals, including garnet, epidote, diopside, and hornblende. The deposits are presumably of pyrometasomatic origin, but whereas deposits of this type are commonly replacement bodies in limestone, at Kasaan Peninsula limestone seemingly was a poor host rock for the ore.

Alaska↗

USGS1962

Epigenetic uranium deposits in the United States, exclusive of Alaska and Hawaii

Productive and unproductive deposits of uranium in the United States (exclusive of Alaska and Hawaii) are shown on the accompanying map. These deposits constitute the actual and some of the potential domestic raw-material sources of uranium. Other potential sources of uranium similar to these known deposits remain to be discovered and are probably distributed, at least in part, in the same general way as the deposits shown on the map.

Mineral Investigations Resource Map↗

USGS1962

Talc and soapstone in the United States, exclusive of Alaska and Hawaii

The locations of talc and soapstone deposits in the United States (exclusive of Alaska and Hawaii) arc shown on the accompanying map. The two types are distinguished by the shape of symbols; the relative importance of the deposits, expressed in broad ranges of tonnage, is indicated by the size of symbols. Two persistent belts in the Southeastern States are shown by patterns, and the locations of the principal deposits within these belts are shown by appropriate symbols

Mineral Investigations Resource Map↗

USGS1986

Hydrologic conditions in Connors Bog Area, Anchorage, Alaska

Connors Bog is a wetland in Anchorage, Alaska, which provides a habitat for many wildlife species and is a popular area for driving off-road vehicles. A landfill, and residential and commercial developments are present in areas which were once wetland. The main source of water is precipitation, which averages about 15 in/yr. Estimates of evapotranspiration, which is the main component of water outflow, range from 10 to 20 in/yr. Minor amounts of groundwater and surface runoff flow into the area from the northeast and southwest and flow out of the area to the northwest and south. Within the wetland, water in peat and sand is unconfined and becomes more mineralized with depth. A leachate beneath and near an abandoned landfill is characterized by concentrations of dissolved solids, dissolved chloride, and total organics that are higher than those of the area 's natural water. The maximum lateral extent of detectable contamination in 1984 was < 500 ft from the landfill 's edge. Water in glacial deposits that underlie a poorly permeable layer of silt and clay is confined. A well completed in this confined aquifer yielded water that had a low concentration of dissolved solids, 150 mg/L. The potentiometric surface of this aquifer was about 20 ft lower than the water table during 1984. Connors Lake occupies a depression that extends below adjacent groundwater levels. The 40-acre lake has a maximum depth of about 9 ft and a low rate of biological production. The quality of water in the lake has not been adversely impacted by nearby residential development or landfill operations. Lake levels appear to be influenced by precipitation and adjacent groundwater levels. (Author 's abstract)

Water-Resources Investigations Report↗

USGS1998

Natural attenuation of chlorinated-hydrocarbon contamination at Fort Wainwright, Alaska: A hydrogeochemical and microbiological investigation workplan

Natural attenuation processes include biological degradation, by which microorganisms break down contaminants into simpler product compounds; adsorption of contaminants to soil particles, which decreases the mass of contaminants dissolved in ground water; and dispersion, which decreases dissolved contaminant concentrations through dilution. The primary objectives of this study are to (1) assess the degree to which such natural processes are attenuating chlorinated-hydrocarbon contamination in ground water, and (2) evaluate the effects of ground-water/surface-water interactions on natural-attenuation processes in the area of the former East and West Quartermasters Fueling Systems for Fort Wainwright, Alaska. The study will include investigations of the hydrologic, geochemical, and microbiological processes occurring at this site that influence the transport and fate of chlorinated hydrocarbons in ground water. To accomplish these objectives, a data-collection program has been initiated that includes measurements of water-table elevations and the stage of the Chena River; measurements of vertical temperature profiles within the subsurface; characterization of moisture distribution and movement in the unsaturated zone; collection of ground-water samples for determination of both organic and inorganic chemical constituents; and collection of ground-water samples for enumeration of microorganisms and determination of their potential to mineralize contaminants. We will use results from the data-collection program described above to refine our conceptual model of hydrology and contaminant attenuation at this site. Measurements of water-table elevations and river stage will help us to understand the magnitude and direction of ground-water flow and how changes in the stage of the Chena River affect ground-water flow. Because ambient ground water and surface water typically have different temperature characteristics, temperature monitoring will likely provide further insight into ground-water/surface-water interactions in the subsurface. Characterization of the unsaturated zone will improve our understanding of interactions among ground water, the unsaturated zone, and the atmosphere. The interactions likely of importance to this study include the migration of water, dissolved contaminants, nutrients, and gases (oxygen, carbon dioxide, and methane) between the saturated and unsaturated zones. We will use the results of ground-water chemical analyses to determine the spatial and temporal distribution of (1) chlorinated-hydrocarbon contaminants and their degradation products, (2) oxidation-reduction indicators, (3) nutrients, and (4) major ground-water ions. These water-quality data will provide insight into ground-water flow directions, interactions between ground water and surface water, attenuation of contaminant concentrations caused by dispersion, and intrinsic microbiological processes. Microbiological analyses will indicate whether microorganisms at the site are capable of degrading the contaminants of interest, and will allow us to estimate their potential to attenuate existing contamination. Physical and chemical data interpreted as part of the analysis of ground water and surface water mixing will improve our understanding of the relationship between water quality and contaminant source mixing.

Alaska↗

USGS2014

The 3D Elevation Program: summary for Oregon

Elevation data are essential to a broad range of business uses, including forest resources management, wildlife and habitat management, national security, recreation, and many others. In the State of Oregon, elevation data are critical for river and stream resource management; forest resources management; water supply and quality; infrastructure and construction management; wildfire management, planning and response; natural resources conservation; and other business uses. Today, high-density light detection and ranging (lidar) data are the primary source for deriving elevation models and other datasets. The Oregon Lidar Consortium (OLC), led by the Oregon Department of Geology and Mineral Industries (DOGAMI), has developed partnerships with Federal, State, Tribal, and local agencies to acquire quality level 1 data in areas of shared interest. The goal of OLC partners is to acquire consistent, high-resolution and high-quality statewide coverage to support existing and emerging applications enabled by lidar data. The National Enhanced Elevation Assessment evaluated multiple elevation data acquisition options to determine the optimal data quality and data replacement cycle relative to cost to meet the identified requirements of the user community. The evaluation demonstrated that lidar acquisition at quality level 2 for the conterminous United States and quality level 5 ifsar data for Alaska with a 6- to 10-year acquisition cycle provided the highest benefit/cost ratios. The 3D Elevation Program (3DEP) initiative selected an 8-year acquisition cycle for the respective quality levels. 3DEP, managed by the U.S. Geological Survey (USGS), the Office of Management and Budget Circular A–16 lead agency for terrestrial elevation data, responds to the growing need for high-quality topographic data and a wide range of other 3D representations of the Nation’s natural and constructed features.

Oregon↗

USGS1993

Reconnaissance guidelines for gold exploration in Central Alaska

Distribution of more than 300 gold-bearing samples from the Livengood (Tolovana) and parts of the Fairbanks and Rampart mining districts in central Alaska, USA, indicate that the concentration of gold in placers is spatially related both to structural features and to Late Cretaceous and (or) Tertiary felsic plutons. The regional consistency of these spatial relationships is demonstrated by proximity analysis using a Geographic Information System (GIS), and suggests a genetic association between faults, felsic plutons, and gold occurrences. The local presence of gold within several of the plutons indicates that these are the source of some of the gold. In addition, some gold occurs proximal to faults where plutons are not present, suggesting that some of the gold was also derived from the country rock. We envision a model whereby weakly mineralized solutions, thermally driven by latent plutonic heat, were enriched by circulation through clastic units that may have had a naturally elevated gold background. The resultant enriched solutions were channeled and reconcentrated along or adjacent to large-scale fault systems. Future exploration to define individual target areas should be directed toward areas where Late Cretaceous and (or) Tertiary felsic plutons occur near major faults. ?? 1993.

Journal of Geochemical Exploration↗

USGS1978

Electron-microprobe study of chromitites associated with alpine ultramafic complexes and some genetic implications

Electron-microprobe and petrographic studies of alpine chromite deposits from around the world demonstrate that they are bimodal with respect to the chromic oxide content of their chromite. The two modes occur at 54 ? 4 and 37 ? 3 weight per cent chromic oxide corresponding to chromite designated as high-chromium and high-aluminum chromite respectively. The high-chromium chromite occurs exclusively with highly magnesian olivine (Fo92-97) and some interstitial diopside. The high-aluminum chromite is associated with more ferrous olivine (Fo88-92), diopside, enstatite, and feldspar. The plot of the mole ratios Cr/(Cr+Al+Fe3+) vs. Mg/(Mg+Fe2+) usually presented for alpine chromite is shown to have a high-chromium, high-iron to low-chromium, low-iron trend contrary to that shown by stratiform chromite. This trend is characteristic of alpine type chromite and is termed the alpine trend. However, a trend similar to that for startiform chromite is discernable on the graph for the high-chromium chromite data. This latter trend is well-developed at Red Mountain, Seldovia, Alaska. Analysis of the iron-magnesium distribution coefficient, Kd=(Fe/Mg)ol/(Fe/Mg)ch, between olivine and chromite shows that Kd for the high-chromium chromite from all ultramafic complexes has essentially the same constant value of .05 while the distribution coefficient for the high-aluminum chromite varies with composition of the chromite. These distribution coefficients are also characteristic of alpine-type chromites. The constant value for Kd for the high-chromium chromite and associated high-magnesium olivine in all alpine complexes suggests that they all crystallized under similar physico-chemical conditions. The two types of massive chromite and their associations of silicate minerals suggest the possibility of two populations with different origins. Recrystallization textures associated with the high-aluminum chromite together with field relationships between the gabbro and the chromite pods, suggest that the high-aluminum chromite was formed by metamorphic recrystallization of the ultramafic rocks and adjacent gabbro.

Open-File Report↗

USGS2007

The Black Mountain tectonic zone--A reactivated northeast-trending crustal shear zone in the Yukon-Tanana Upland of east-central Alaska

The Black Mountain tectonic zone in the YukonTanana terrane of east-central Alaska is a belt of diverse northeast-trending geologic features that can been traced across Black Mountain in the southeast corner of the Big Delta 1°×3° degree quadrangle. Geologic mapping in the larger scale B1 quadrangle of the Big Delta quadrangle, in which Black Mountain is the principal physiographic feature, has revealed a continuous zone of normal and left-lateral strikeslip high-angle faults and shear zones, some of which have late Tertiary to Quaternary displacement histories. The tectonic zone includes complexly intruded wall rocks and intermingled apophyses of the contiguous mid-Cretaceous Goodpaster and Mount Harper granodioritic plutons, mafic to intermediate composite dike swarms, precious metal mineralization, early Tertiary volcanic activity and Quaternary fault scarps. These structures define a zone as much as 6 to 13 kilometers (km) wide and more than 40 km long that can be traced diagonally across the B1 quadrangle into the adjacent Eagle 1°×3° quadrangle to the east. Recurrent activity along the tectonic zone, from at least mid-Cretaceous to Quaternary, suggests the presence of a buried, fundamental tectonic feature beneath the zone that has influenced the tectonic development of this part of the Yukon-Tanana terrane. The tectonic zone, centered on Black Mountain, lies directly above a profound northeast-trending aeromagnetic anomaly between the Denali and Tintina fault systems. The anomaly separates moderate to strongly magnetic terrane on the northwest from a huge, weakly magnetic terrane on the southeast. The tectonic zone is parallel to the similarly oriented left-lateral, strike-slip Shaw Creek fault zone 85 km to the west.

Alaska, Yukon↗

USGS2013

The giant Pebble Cu-Au-Mo deposit and surrounding region, southwest Alaska: Introduction

The Pebble deposit is located about 320 km southwest of and 27 km northwest of the village of Iliamna in Alaska (Fig. 1A). It is one of the largest porphyry deposits in terms of contained Cu (Fig. 2A) and it has the largest Au endowment of any porphyry deposit in the world (Fig. 2B). The deposit comprises the Pebble West and Pebble East zones that represent two coeval hydrothermal centers within a single system (Lang et al., 2013). Together the measured and indicated resources total 5,942 million metric tons (Mt) at 0.42% Cu, 0.35 g/t Au, and 250 ppm Mo with an inferred resource of 4,835 Mt at 0.24% Cu, 0.26 g/t Au, and 215 ppm Mo. In addition, the deposit contains significant concentrations of Ag, Pd, and Re (Northern Dynasty Minerals, 2011).

Alaska↗

USGS2015

Soil surface organic layers in Arctic Alaska: spatial distribution, rates of formation, and microclimatic effects

Organic layers of living and dead vegetation cover the ground surface in many permafrost landscapes and play important roles in ecosystem processes. These soil surface organic layers (SSOLs) store large amounts of carbon and buffer the underlying permafrost and its contained carbon from changes in aboveground climate. Understanding the dynamics of SSOLs is a prerequisite for predicting how permafrost and carbon stocks will respond to warming climate. Here we ask three questions about SSOLs in a representative area of the Arctic Foothills region of northern Alaska: (1) What environmental factors control the thickness of SSOLs and the carbon they store? (2) How long do SSOLs take to develop on newly stabilized point bars? (3) How do SSOLs affect temperature in the underlying ground? Results show that SSOL thickness and distribution correlate with elevation, drainage area, vegetation productivity, and incoming solar radiation. A multiple regression model based on these correlations can simulate spatial distribution of SSOLs and estimate the organic carbon stored there. SSOLs develop within a few decades after a new, sandy, geomorphic surface stabilizes but require 500–700 years to reach steady state thickness. Mature SSOLs lower the growing season temperature and mean annual temperature of the underlying mineral soil by 8 and 3°C, respectively. We suggest that the proximate effects of warming climate on permafrost landscapes now covered by SSOLs will occur indirectly via climate's effects on the frequency, extent, and severity of disturbances like fires and landslides that disrupt the SSOLs and interfere with their protection of the underlying permafrost.

Alaska↗

USGS1987

Petrogenesis of gabbronorite at Yakobi and northwest Chichagof Islands, Alaska

On Yakobi Island and at Mirror Harbor on the northwest coast of Chichagof Island, gabbronorite occurs as irregular bodies, as much as 5.5 km in maximum dimension, mostly within a 40 to 43 m.y. composite pluton consisting largely of tonalite. The gab-bronorites are the host rocks for a magmatic nickel-copper sulfide deposit consisting predominantly of pyrrhotite, pentlandite, and chalcopyrite. The gabbronorites characteristically have more orthopyroxene than augite and have a significant amount of hornblende. Rock types mapped as gabbronorite range from hornblende pyroxenite to hornblende-pyroxene gabbronorite to quartz-bearing norite and gabbronorite. The tonalite pluton is composed of hornblende diorite, biotite-hornblende diorite, hornblende quartz diorite, biotite-hornblende tonalite, and biotite granodiorite. Contacts between types of gabbronorite are generally gradational on a scale of centimetres to metres; contacts between gabbronorite and the tonalite pluton are gradational on a scale of metres to tens of metres. Rock textures, pyroxene-hornblende relations, and rock and mineral chemistry of the gabbronorites show systematic changes as the gabbronorites grade into the tonalites. The field, petrographic, and chemical data, including trace-element abundances, of the gabbronorites and tonalite pluton rocks can best be explained by either (1) crystallization of gabbronorite from a tholeiitic magma with subsequent assimilation by tonalite that was simultaneously undergoing fractional crystallization or (2) fractional crystallization of a quartz diorite parent magma yielding the range of gabbronorites and tonalite pluton rocks.

Geological Society of America Bulletin↗

USGS1966

Effects of the earthquake of March 27, 1964, at Valdez, Alaska

Valdez is situated on the seaward edge of a large outwash delta composed of a thick section of saturated silty sand and gravel. The earthquake of March 27, 1964, triggered a massive submarine slide, involving approximately 98 million cubic yards of material that destroyed the harbor facilities and nearshore installations. Waves generated by the slide and subsequent strong seiches did additional damage in the downtown area. Stresses generated by the seismic shocks and the slide developed an extensive system of fissures throughout the unconsolidated deposits at the head of the fiord. These fissures plus the shocks caused structural damage to many of the buildings in Valdez and destroyed the sewer and water systems. Removal of support from the face of the delta by submarine sliding allowed some of the material to move seaward and caused parts of the shore area to subside below high-tide level. A site for relocating the town of Valdez has been designated. It is situated on the Mineral Creek fan--an area underlain by coarse alluvial gravel. This relocation site is protected from sea waves by a series of bedrock ridges and islands that also provide a resistant buttress retaining and protecting the toe of the fan from danger of sliding or slumping. The absence of evidence of ground breakage on the Mineral Creek fan indicates that the coarse subsoils at the relocation site react favorably under seismic conditions.

Alaska↗

USGS2015

Long-term anoxia and release of ancient, labile carbon upon thaw of Pleistocene permafrost

The fate of permafrost carbon upon thaw will drive feedbacks to climate warming. Here we consider the character and context of dissolved organic carbon (DOC) in yedoma permafrost cores from up to 20 m depth in central Alaska. We observed high DOC concentrations (4 to 129 mM) and consistent low molecular weight organic acid concentrations in three cores. We estimate a DOC production rate of 12 µmol DOC m −2 yr −1 based on model ages of up to ~200 kyr derived from uranium isotopes. Acetate C accounted for 24 ± 1% of DOC in all samples. This proportion suggests long-term anaerobiosis and is likely to influence thaw outcomes due to biolability of acetate upon release in many environments. The combination of uranium isotopes, ammonium concentrations, and calcium concentrations explained 86% of the variation in thaw water DOC concentrations, suggesting that DOC production may be related to both reducing conditions and mineral dissolution over time.

Geophysical Research Letters↗

USGS1955

Ore deposits on northwestern Chichagof Island, Alaska

The area mapped includes most of northwestern Chichagof Island. The work, started in 1946, is a continuation of the geologic mapping done in the adjoining Chichagof mining district by Reed and Coats. The gold-bearing zone recognized by these writers continues through the area mapped by the writer to the northern shore of Chichagof Island. Stratified rocks ranging in age from Paleozoic through Early Cretaceous were intruded by gabbro, quartz diorite, norite-gabbro, and by younger quartz diorite. The igneous rocks from oldest to youngest are: gabbro, diorite, quartz diorite, the rocks associated with the nickel deposits, which include gabbro-norite and quartz diorite, and basalt. The diorite is believed to have been formed during Early Cretaceous time, and the gabbro is older by an unknown amount. The gabbro and diorite are believed to be, over large areas, recrystallized older rock. The oldest group of quartz diorite intrusives in places cuts the diorite and is therefore younger. The quartz diorite is minerally somewhat foliated and slightly metamorphosed. The igneous rocks associated with the nickel deposits are the youngest of the major igneous rock groups. They intruded the Cretaceous graywacke after it had been folded to essentially its present position. Gold is the most economically important mineral commodity mined to date. The Apex and El Nido are the two largest mines in the area, but some gold has been recovered from the Goldwin and Cobol properties and small amounts from some other small prospects. In addition to gold the area includes nickel-bearing deposits at Mirror Harbor on Chichagof Island and at Bohemia Basin on Yakobi Island. Copper mineralization occurs in the area north of Goulding Harbor. An attempt has been made to outline areas favorable for prospecting based on the regional geology and, on the number and kind of quartz veins found. In general the best area for prospecting appears to be on a northwest-trending zone which extends from the head Pinta Bay to the northern end of Althorp Peninsula.

Alaska↗

USGS1974

A tabulation of K-Ar, Rb-Sr and Pb-alpha ages obtained for materials within the United States (including Alaska and Hawaii) during the years 1956 through 1964

This tabulation of ages has been made as a convenience to anyone desiring a quick reference to ages published in the United States from 1956 through 1964. This tabulation does not include all published K-Ar, Rb-Sr, or Pb-a ages, but is probably 98 percent complete. Many of the radiometric ages published in abstracts, footnotes, or personal communications are not included as sample localities are lacking or are not sufficiently detailed to be of value. Such ages are often published in a subsequent article with detailed sample locations and geologic interpretation. There may be some duplication of ages in this tabulation. The references listed are either the original source for an age or the best source in regard to sample location, decay constants, interpretation, etc. For a tabulation of Pb-a ages published prior to 1957, see U. S. Geological Survey Bulletin 1097-B, Lead-alpha age determinations of accessory minerals of igneous rocks (1953-1957) by H. W. Jaffe, David Gottfried, C. L. Waring, and H. W. Worthing (1959). A minor number of unpublished radiometric ages from Ph.D. or M.S. theses are also listed in this tabulation. The tabulated ages are systematized according to year and state. All ages published during a specific year (i.e. 1956) are grouped together, with the ages listed under the name of the state in which the sample was collected. The states are alphabetized. The dated sample is described as to rock type, location, material analyzed, age(s) determined, radiometric method used, and published reference (by first author only). The complete reference is listed at the end of the tabulation for each specific year. To answer questions about geologic interpretation, decay constants, or location, one must review the source reference.

Open-File Report↗