USGS Science⌕ Search

SEARCH · USGS Science

Results for “Technical Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71Linked to original sources
USGS2021

System characterization report on Planet’s Dove-R

Executive Summary This report addresses system characterization of Planet’s Dove-R and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Since 2013, Planet has launched more than 360 Dove 3U CubeSats, where U stands for 10-centimeter (cm) x 10-cm x 10-cm stowed dimensions, each weighing about 5 kilograms. Since 2015, all Dove satellites have had four-band imagers with about a 4-meter (m) pixel ground sample distance. Since 2016, all Doves have been launched into Sun-synchronous orbits varying from 474 to 524 kilometers, with inclinations between 97 and 98 degrees. The Dove series satellites do not have orbit maintenance capabilities; thus, their orbits decay slowly over time, contributing to shorter lifetimes of about 3 years. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Dove-R has an interior geometric performance in the range of −0.306 (−0.102 pixel) to 0.286 m (0.095 pixel) in easting and 0.090 (0.030 pixel) to 1.084 m (0.361 pixel) in northing in band-to-band registration, an exterior geometric performance of −5.10 m (−0.51 pixel) in easting and 3.30 m (0.33 pixel) in northing offset in comparison to Sentinel-2, a radiometric performance in the range of −0.023 to −0.008 in offset and 0.948 to 1.077 in slope, and a spatial performance in the range of 2.96 to 3.15 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.001 to 0.003.

Open-File Report↗
USGS2023

System characterization report on the BlackSky Global multispectral sensor

Executive Summary This report addresses system characterization of the BlackSky Global satellites and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The BlackSky Global satellites are three-band multispectral imagers (red, green, and blue multispectral bands plus a panchromatic band) with a 0.8- to 0.9-meter (m) pixel ground sample distance for the assessed satellites. BlackSky Global satellites 9 and 12–17 were launched in March and December 2021, respectively, into a Sun-synchronous orbit of 430–450 kilometers with an inclination of 42–53 degrees and a swath width of 6 kilometers at nadir. Each Global satellite has an expected lifetime of about 3 years. More information on the BlackSky Global satellites is available in the “Land Remote Sensing Satellites Online Compendium” ( https://calval.cr.usgs.gov/apps/compendium ) and from BlackSky at Real-Time Space-Based Intelligence (blacksky.com) The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior) and spatial performances. Results of these analyses indicate that the assessed BlackSky Global satellites have an interior geometric performance in the range of −0.011 m (−0.012 pixel) to 0.007 m (0.008 pixel) in easting and −0.018 m (−0.020 pixel) to 0.012 m (0.013 pixel) in northing in band-to-band registration; an exterior geometric performance using ground control points of 8.0-m circular error (95-percent certainty) for orthorectified products and 10.7- to 17.4-m circular error (95-percent certainty) for nonorthorectified products, depending on the geolocation metadata used; and a spatial performance in the range of 1.70 to 2.43 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.032 to 0.084.

Open-File Report↗
USGS2021

System characterization report on Planet’s Dove Classic

Executive Summary This report addresses system characterization of Planet’s Dove Classic satellites and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Since 2013, Planet has launched more than 360 Dove 3U CubeSats, where U stands for 10-centimeter (cm) x 10-cm x 10-cm stowed dimensions, each weighing about 5 kilograms. Since 2015, all Dove satellites have had four-band imagers with about a 4-meter (m) pixel ground sample distance. Since 2016, all Doves have been launched into Sun-synchronous orbits varying from 474 to 524 kilometers, with inclinations between 97 and 98 degrees. The Dove series satellites do not have orbit maintenance capabilities; thus, their orbits decay slowly over time, contributing to shorter lifetimes of about 3 years. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Dove Classic has an interior geometric performance in the range of −0.218 (−0.073 pixel) to −0.037 m (−0.012 pixel) in easting and −0.167 (−0.056 pixel) to −0.111 m (−0.037 pixel) in northing in band-to-band registration, an exterior geometric error of −6.841 (−2.280 pixels) in easting and −6.235 m (−2.078 pixels) in northing offset in comparison to Landsat 8 Operational Land Imager, a radiometric performance in the range of −0.057 to −0.010 in offset and 0.963 to 1.298 in slope, and a spatial performance in the range of 2.77 to 3.35 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.003 to 0.010.

Open-File Report↗
USGS2021

System characterization report on the China-Brazil Earth Resources Satellite-4A (CBERS–4A)

Executive Summary This report addresses system characterization of the China-Brazil Earth Resources Satellite-4A (CBERS–4A) multispectral remote sensing satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence in 2021. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. CBERS–4A is a joint Chinese-Brazilian medium-resolution satellite launched in December 2019 by the China National Space Agency/National Institute for Space Research (Brazil) on a Chang Zheng 4B rocket from the Taiyuan Satellite Launch Center for Earth resources monitoring. The CBERS–4A mission continues the CBERS mission that has been in continual operation since the launch of CBERS–1 in 1999. The CBERS–4A satellite was designed and built by Academia Chinesa de Tecnologia Espacial/National Institute for Space Research and uses the Phoenix-Eye bus. CBERS–4A carries the multispectral camera and wide field imager sensors for medium-resolution land imaging and the wide swath panchromatic and multispectral camera sensor for high-resolution land imaging. This assessment focused on the multispectral camera sensor only. More information on CBERS sensors is available in the “ 2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium ” and at https://www.gov.br/pt-br/servicos/obter-imagens-de-sensoriamento-remoto-da-terra-geradas-pelo-satelite-cbers-04a . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that CBERS–4A provides an interior (band-to-band) geometric performance in the range of −0.02 to −0.16 pixel; an exterior geometric accuracy performance of −22.02 (−1.47 pixels) to −16.06 meters (−1.07 pixels); a radiometric accuracy performance of –0.006 to 0.925 (offset and slope); and a spatial performance for relative edge response in the range of 0.39 to 0.44, for full width at half maximum in the range of 2.38 to 2.56 pixels, and for a modulation transfer function at a Nyquist frequency in the range of 0.001 to 0.013.

Open-File Report↗
USGS2022

System characterization report on Planet’s SuperDove

Executive Summary This report addresses system characterization of Planet’s SuperDove and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Since 2013, Planet has launched more than 360 Dove 3U CubeSats, where U stands for 10-centimeter (cm) x 10-cm x 10-cm stowed dimensions, each weighing about 5.8 kilograms. Since 2015, all Dove satellites have had four-band imagers with about a 3-meter (m) pixel ground sample distance. Since 2016, all Doves have been launched into Sun-synchronous orbits varying from 474 to 524 kilometers, with inclinations between 97 and 98 degrees. The Dove series satellites do not have orbit maintenance capabilities; thus, their orbits decay slowly over time, contributing to shorter lifetimes of about 3 years. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that SuperDove has a band-to-band geometric performance in the range of −1.701 m (−0.567 pixel) to 1.173 m (0.391 pixel) in easting and −4.950 m (−1.650 pixels) to 6.051 m (2.017 pixels) in northing, an image-to-image geometric performance of −1.17 m (−0.39 pixel) to 23.45 m (7.82 pixels) in easting and −10.61 m (−3.54 pixels) to −4.43 m (−1.48 pixels) in northing offset in comparison to Sentinel-2, a radiometric performance in the range of −0.043 to 0.020 in offset and 0.812 to 1.246 in slope, and a spatial performance in the range of 3.59 to 3.70 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.005 to 0.008.

Open-File Report↗
USGS2021

System characterization report on Resourcesat-2 Advanced Wide Field Sensor

Executive Summary This report addresses system characterization of the Indian Space Research Organisation Resourcesat-2 Advanced Wide Field Sensor (AWiFS) and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence in 2021. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Resourcesat-2 is a medium-resolution satellite launched in 2011 on the Polar Satellite Launch Vehicle-C16. Resourcesat-2 carries the same sensing elements as Resourcesat-1 (launched in October 2003) and provides continuity for the mission. The objectives of the Resourcesat mission are to provide remote sensing data services to global users, focusing on data for integrated land and water resources management. Resourcesat-2A is identical to Resourcesat-2 and was launched in 2016 on the Polar Satellite Launch Vehicle-C36 launch vehicle for continuity of data and improved temporal resolution. The two satellites operating in tandem improved the revisit capability from 5 days to 2–3 days. The Resourcesat-2 platform is of Indian Remote Sensing Satellites-1C/1D–P3 heritage and was built by the Indian Space Research Organisation. Resourcesat-2 and Resourcesat-2A carry the AWiFS, Linear Imaging Self Scanning-3, and Linear Imaging Self Scanning-4 sensors for medium-resolution imaging. More information on Indian Space Research Organisation satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.isro.gov.in/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that AWiFS has an interior geometric performance in the range of −16.080 (−0.268 pixel) to 35.520 meters (m; 0.592 pixel) in easting and −25.680 (−0.428 pixel) to 23.400 m (0.390 pixel) in northing in band-to-band registration, an exterior geometric error of −64.262 (−1.071 pixels) to −19.059 m (−0.318 pixel) in easting and −29.028 (−0.484 pixel) to 41.249 m (0.687 pixel) in northing offset in comparison to the Landsat 8 Operational Land Imager, a radiometric performance in the range of 2.29–2.36 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.030–0.035.

Open-File Report↗
USGS2025

System characterization report on Resourcesat-2A Linear Imaging Self Scanning-3 sensor

Executive Summary This report addresses system characterization of the Indian Space Research Organisation Resourcesat-2A Linear Imaging Self Scanning-3 sensor and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence since 2021. These reports present and detail the methodology and procedures for characterization, present technical and operational information about the specific sensing system being evaluated, and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Resourcesat-2A is identical to Resourcesat-2 and was launched in 2016 on the Polar Satellite Launch Vehicle-C36 for continuity of data and improved temporal resolution. The Resourcesat-2 platform (which includes Resourcesat-2A) is of Indian Remote Sensing Satellites-1C/1D–P3 heritage and was built by the Indian Space Research Organisation. Resourcesat-2 and Resourcesat-2A carry the Linear Imaging Self Scanning-3 and Linear Imaging Self Scanning-4 sensors for medium-resolution imaging. More information on Indian Space Research Organisation satellites and sensors is available in the “2022 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.isro.gov.in/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. To summarize the results, we have determined that this sensor provides an interior geometric performance with mean offsets in the range of 1.75 meters (m; 0.06 pixel) to 6.83 m (0.23 pixel) in easting and −1.83 m (−0.06 pixel) to 1.81 m (0.06 pixel) in northing in band-to-band registration and a root mean square error in the range of 3.81 m (0.13 pixel) to 8.19 m (0.27 pixel) in easting and 2.21 m (0.09 pixel) to 4.72 m (0.16 pixel) in northing. We have measured an exterior geometric error offset in the range of −21.29 to 6.88 m in easting and −7.35 to −2.63 m in northing, and the root mean square error is in the range of 7.19 to 21.43 m in easting and 3.64 to 8.19 m in northing in comparison to the Landsat 8 Operational Land Imager. The measured radiometric performance was in the range of −0.002 to 0.031 in offset and 0.701 to 0.940 in slope, and the spatial performance was in the range of 1.204 to 1.265 pixels for full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.251 to 0.277.

Open-File Report↗
USGS2024

System characterization report on Vision-1

Executive Summary This report addresses system characterization of the Airbus Vision-1 satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Vision-1 is a high-resolution Earth observation satellite launched in September 2018 as a collaborative effort between Airbus and Surrey Satellite Technology Ltd. It features a Newtonian telescope with a refractive relay, capturing images in panchromatic and multispectral bands. Operating in a Sun-synchronous orbit at an altitude of 583 kilometers, Vision-1 ensures consistent illumination conditions during image acquisition. It has a revisit time of 1 to 8 days depending on latitude and viewing angle, and it features an off-pointing agility of plus or minus 45 degrees, allowing for multiple target captures in a single pass using spot, strip, and mosaic imaging modes. The panchromatic band offers a resolution of 0.87 meter (m), whereas the multispectral bands (blue, green, red, and near infrared) provide a resolution of 3.48 m. These capabilities support a variety of applications including urban planning, agricultural monitoring, land classification, natural resource management, and disaster response. More information on the Vision-1 satellite and sensors is available in the “2022 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium.” The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that the Vision-1 satellite has an interior geometric performance in the range of 0 to 0.02 m in easting and −0.01 to 0.03 m in northing in band-to-band registration, an exterior geometric performance of 1.7 to 2.2 m in easting and −1.1 to −0.7 m in northing offset with a 90-percent circular error of 3.4 to 3.7 m, a radiometric performance in the range of −0.029 to 0.017 in offset and 0.884 to 0.984 in slope, and a spatial performance in the range of 0.992 to 1.092 pixels for multispectral full width at half maximum and 1.895 pixels for the panchromatic band full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.29 to 0.36 for the multispectral bands and 0.05 for the panchromatic band.

Open-File Report↗
USGS2021

System characterization report on Resourcesat-2 Linear Imaging Self Scanning-3 (LISS–3) sensor

Executive Summary This report addresses system characterization of the Indian Space Research Organisation Resourcesat-2 Linear Imaging Self Scanning-3 (LISS–3) sensor and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence in 2021. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Resourcesat-2 is a medium-resolution satellite launched in 2011 on the Polar Satellite Launch Vehicle-C16 launch vehicle. Resourcesat-2 carries the same sensing elements as Resourcesat-1 (launched in October 2003) and provides continuity for the mission. The objectives of the Resourcesat mission are to provide remote sensing data services to global users, focusing on data for integrated land and water resources management. Resourcesat-2A is identical to Resourcesat-2 and was launched in 2016 on the Polar Satellite Launch Vehicle-C36 launch vehicle for continuity of data and improved temporal resolution. The two satellites operating in tandem improved the revisit capability from 5 days to 2–3 days. The Resourcesat-2 platform is of Indian Remote Sensing Satellites-1C/1D–P3 heritage and was built by the Indian Space Research Organisation. Resourcesat-2 and Resourcesat-2A carry the Advanced Wide Field Sensor and LISS–3, as well as the Linear Imaging Self Scanning-4 for medium-resolution imaging. More information on Indian Space Research Organisation satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.isro.gov.in/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that LISS–3 has an interior geometric performance in the range of −4.620 (−0.154 pixel) to 13.230 meters (m; 0.441 pixel) in easting and −12.360 (−0.412 pixel) to 1.500 m (0.050 pixel) in northing in band-to-band registration, an exterior geometric error of −27.805 (−0.927 pixel) to 26.578 m (0.886 pixel) in easting and −35.341 (−1.178 pixel) to −6.286 m (−0.210 pixel) in northing offset in comparison to the Landsat 8 Operational Land Imager, a radiometric performance in the range of −0.096 to 0.036 in offset and 0.585–0.946 in slope, and a spatial performance in the range of 1.87–1.95 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.045–0.070.

Open-File Report↗
USGS1995

Delineation of flooding within the upper Mississippi River basin — Flood of July 30, 1993, in Jefferson City and vicinity, Missouri

This report provides Missouri River flood-peak elevation data and delineates the areal extent of flooding in Jefferson City and vicinity, Missouri, for July 30, 1993. The July 1993 flood is compared with the Federal Emergency Management Agency's (FEMA) 100- and 500-year flood profiles. This report is one of a series of U.S. Geological Survey reports to document the flooding within the upper Mississippi River Basin in 1993 and to improve the technical base on which flood-plain management decisions can be made by other agencies.

Missouri↗
USGS1998

Delineation of flooding within the upper Mississippi River basin: Flood of August 1-3, 1993, in St. Louis and vicinity, Missouri

A five-sheet hydrologic investigations atlas provides flood-peak elevation data and delineates the areal extent of flooding of the Missouri, the Mississippi, and the Meramec Rivers and the River des Peres in St. Louis and vicinity from August 1 through 3, 1993. The August 1993 flood is compared with the Federal Emergency Management Agency's (FEMA) 100- and 500-year flood profiles. This atlas is one of a series of USGS reports that documents the 1993 flooding in the upper Mississippi River Basin. The information presented here will improve the technical base on which flood-plain management decisions can be made.

Missouri↗
USGS1952

Topical index and bibliography of U.S. Geological Survey Trace Elements and related reports

Part 1, the topical index, lists the titles of reports prepared from 1941 to December 1952, in conjunction with the Geological Survey's program of uranium and other elements of related interest. It includes not only completed Trace Elements reports and those now in preparation, but also Survey publications, publications by Survey personnel in scientific journals, and open-fie releases. The titles are grouped topically under the headings listed in the table of contents. Entries in each category are listed alphabetically, by author, and numbered consecutively. Many of the reports have been cross-indexed, where appropriate. The classification of the Trace Elements reports, insofar as it is known, has been indicated after the title of the report. The classification of some of the earlier Trace Elements reports is uncertain. The Geological Survey does not have additional copies of most of the reports listed, but copies of some of the completed reports can be loaned on request to organizations officially cooperating with the Atomic Energy Commission. Many Trace Elements reports have been made available to the public, either by open-file release, reproduction by Technical Information Service, Oak Ridge (referred to as TIS), by publication as a Geological Survey circular or bulletin or by a publication in a scientific journal. This information is given, following the title of the report. If the abstract of a Trace Element report has been published in Nuclear Science Abstracts, it is noted by the initials NSA following the title of the report. Part 2 is a reference guide to information on the Trace Elements program that is available to the public. This information is categorized according to the type of publication or release.

Trace Elements Investigations↗
USGS2012

Impacts of climate change on biodiversity, ecosystems, and ecosystem services: technical input to the 2013 National Climate Assessment

Ecosystems, and the biodiversity and services they support, are intrinsically dependent on climate. During the twentieth century, climate change has had documented impacts on ecological systems, and impacts are expected to increase as climate change continues and perhaps even accelerates. This technical input to the National Climate Assessment synthesizes our scientific understanding of the way climate change is affecting biodiversity, ecosystems, ecosystem services, and what strategies might be employed to decrease current and future risks. Building on past assessments of how climate change and other stressors are affecting ecosystems in the United States and around the world, we approach the subject from several different perspectives. First, we review the observed and projected impacts on biodiversity, with a focus on genes, species, and assemblages of species. Next, we examine how climate change is affecting ecosystem structural elements—such as biomass, architecture, and heterogeneity—and functions—specifically, as related to the fluxes of energy and matter. People experience climate change impacts on biodiversity and ecosystems as changes in ecosystem services; people depend on ecosystems for resources that are harvested, their role in regulating the movement of materials and disturbances, and their recreational, cultural, and aesthetic value. Thus, we review newly emerging research to determine how human activities and a changing climate are likely to alter the delivery of these ecosystem services. This technical input also examines two cross-cutting topics. First, we recognize that climate change is happening against the backdrop of a wide range of other environmental and anthropogenic stressors, many of which have caused dramatic ecosystem degradation already. This broader range of stressors interacts with climate change, and complicates our abilities to predict and manage the impacts on biodiversity, ecosystems, and the services they support. The second cross-cutting topic is the rapidly advancing field of climate adaptation, where there has been significant progress in developing the conceptual framework, planning approaches, and strategies for safeguarding biodiversity and other ecological resources. At the same time, ecosystem-based adaptation is becoming more prominent as a way to utilize ecosystem services to help human systems adapt to climate change. In this summary, we present key findings of the technical input, focusing on themes that can be found throughout the report. Thus, this summary takes a more integrated look at the question of how climate change is affecting our ecological resources, the implications for humans, and possible response strategies. This integrated approach better reflects the impacts of climate in the real world, where changes in ecosystem structure or function will alter the viability of different species and the efficacy of ecosystem services. Likewise, adaptation to climate change will simultaneously address a range of conservation goals. Case studies are used to illustrate this complete picture throughout the report; a snapshot of one case study, 2011 Las Conchas, New Mexico Fire , is included in this summary.

Report↗
USGS1995

EAST93: Geophysical traverse from the Transantarctic Mountains to the Wilkes Basin, East Antarctica

The East Antarctic Seismic Traverse (EAST93) was a geophysical traverse designed to image the bedrock under the East Antarctic ice cap. The traverse started 10 km west of the Taylor Dome drill site and 25 km west of the exposed bedrock of the Transantarctic Mountains at Lashly Mt. and ended 323 km west of the drill site over the Wilkes subglacial basin (Fig. 1). The traverse was located subparallel to latitude 78° S starting 30-50 km north of the Victoria Land Traverse (1958-1959). It was carried out jointly by the U.S. Geological Survey and Stanford University, U.S.A., together with the Institute of Geological and Nuclear Sciences, and Victoria University, New Zealand, during December 1993 and January 1994. The geophysical traverse included 236 km of multichannel seismic reflection data at 150 m shot intervals, 312.5 km of gravity data collected at intervals of 2.1 km, 312.5 km of magnetic data (total field intensity) collected at average intervals of 0.5 km, and 205 km of ground penetrating radar at intervals of 77 m. Relative locations and elevations of the entire traverse were measured at intervals of 150 m by traditional surveying methods, and tied to three absolute locations measured by the Global Positioning System (GPS). EAST93 is the first large-scale geophysical traverse on the polar plateau to our knowledge since the early 1960s. As such, the experiment presented several logistical challenges: (1) how to collect regional seismic profiles during the short Antarctic summer; (2) how to keep the scientific instruments running with minimal protection in harsh conditions; and (3) how to combine daily moves of camp with full days of work. The scientific and logistical aspects of the project proceeded, in general, according to plan despite the harsh conditions and our lack of previous experience on the polar plateau. Two unanticipated problems affected the progress of the work: the strong wind which slowed seismic acquisition, and the break-down of one of the large traverse vehicles. The major operational lessons of this project are. (1) Primacord laid close to the surface is not an adequate seismic source for imaging under the thick East Antarctic ice sheet, despite positive prior tests on the Ross Ice Shelf. (2) It is necessary to reduce the 6-7 hours spent daily on camp move and other chores by integrating the living quarters into the working teams, and by improving vehicle warming methods and generator housing. The following report details the operational and logistical aspects of the work, the weather and ground conditions, the technical aspects of acquisition of geophysical data, and lessons and recommendations for future geophysical traverses.

Open-File Report↗
USGS2012

U.S. Geological Survey, National Wildlife Health Center, 2011 report of selected wildlife diseases

The National Wildlife Health Center (NWHC) was founded in 1975 to provide technical assistance in identifying, controlling, and preventing wildlife losses from diseases, conduct research to understand the impact of diseases on wildlife populations, and devise methods to more effectively manage these disease threats. The impetus behind the creation of the NWHC was, in part, the catastrophic loss of tens of thousands of waterfowl as a result of an outbreak of duck plague at the Lake Andes National Wildlife Refuge in South Dakota during January 1973. In 1996, the NWHC, along with other Department of Interior research functions, was transferred from the U.S. Fish and Wildlife Service to the U.S. Geological Survey (USGS), where we remain one of many entities that provide the independent science that forms the bases of the sound management of the Nation’s natural resources. Our mission is to provide national leadership to safeguard wildlife and ecosystem health through dynamic partnerships and exceptional science. The main campus of the NWHC is located in Madison, Wis., where we maintain biological safety level 3 (BSL–3) diagnostic and research facilities purposefully designed for work with wildlife species. The NWHC provides research and technical assistance on wildlife health issues to State, Federal, and international agencies. In addition, since 1992 we have maintained a field station in Hawaii, the Honolulu Field Station, which focuses on marine and terrestrial natural resources throughout the Pacific region. The NWHC conducts diagnostic investigations of unusual wildlife morbidity and mortality events nationwide to detect the presence of wildlife pathogens and determine the cause of death. This is also an important activity for detecting new, emerging and resurging diseases. The NWHC provides this crucial information on the presence of wildlife diseases to wildlife managers to support sound management decisions. The data and information generated also allows for further indepth analyses for determining the biological and ecological significance of disease events, detecting disease trends over time and space, as well as detecting any significant changes to how diseases manifest in the field. Moreover, this information allows us to gain insight into the significance of future wildlife disease events. The purpose of this report is to provide a sample of NWHC data that are available from our Laboratory Information Management System (LIMS). These data are presented in summary format with minimal statistical analysis and interpretation. The goal is to share these data with wildlife managers and other stakeholders, promote the use of NHWC data, and encourage the sharing of wildlife disease data to improve temporal and geographic surveillance coverage. Continued national surveillance for wildlife diseases is essential for providing early detection and warning of events that have the potential to result in harm to human health, economic losses, declines in wildlife populations, and subsequent ecological disturbances. Increased collaboration, coordination, and sharing of surveillance data will enhance this Nation’s ability to detect and respond to wildlife disease threats.

Scientific Investigations Report↗
USGS2010

2009 Data Summary USA-NPN Technical Series

The USA National Phenology Network (USA-NPN) engages volunteer observers to collect phenology observations of plants and animals using consistent standards and to contribute to the USA-NPN National Phenology Database. In March 2009, the USA-NPN National Coordinating Office implemented an online monitoring program for 213 plant species. In this pilot year of the program, 547 observers reported phenology observations on one or more plants via an online interface. There was substantial national interest in participating in this program, focused only on plants and with minimal advertising or marketing, which resulted in fifteen hundred new registrants, a thousand new sites, and tens of thousands of observations on 133 plant species across the nation in less than a year. Participants tended to stay involved, reporting most phenophases for an average of nine unique dates over almost two months during the year. This suggests sustained interest in participation and that the online interface and status monitoring engage the public, keeping them involved in the project and in participatory monitoring and outdoor activities. The data collected by participants show interesting patterns of plant phenology on regional to national scales that are commensurate with our understanding of climatological gradients associated with latitude, longitude, elevation, and degree of continentality. As such, these data should be useful to a variety of stakeholders interested in the spatial and temporal patterns of plant activity on a national scale. Through time, these data should empower scientists, resource managers, and the public in making decisions concerning adaptation to variable and changing climates and environments.

USA-NPN Technical Series↗
USGS2014

Strategic conservation planning for the Eastern North Carolina/Southeastern Virginia Strategic Habitat Conservation Team

The Eastern North Carolina/Southeastern Virginia Strategic Habitat Conservation Team (ENCSEVA) is a partnership among local federal agencies and programs with a mission to apply Strategic Habitat Conservation to accomplish priority landscape-level conservation within its geographic region. ENCSEVA seeks to further landscape-scale conservation through collaboration with local partners. To accomplish this mission, ENCSEVA is developing a comprehensive Strategic Habitat Conservation Plan (Plan) to provide guidance for its members, partners, and collaborators by establishing mutual conservation goals, objectives, strategies, and metrics to gauge the success of conservation efforts. Identifying common goals allows the ENCSEVA team to develop strategies that leverage joint resources and are more likely to achieve desired impacts across the landscape. The Plan will also provide an approach for ENCSEVA to meet applied research needs (identify knowledge gaps), foster adaptive management principles, identify conservation priorities, prioritize threats (including potential impacts of climate change), and identify the required capacity to implement strategies to create more resilient landscapes. ENCSEVA seeks to support the overarching goals of the South Atlantic Landscape Conservation Cooperative (SALCC) and to provide scientific and technical support for conservation at landscape scales as well as inform the management of natural resources in response to shifts in climate, habitat fragmentation and loss, and other landscape-level challenges (South Atlantic LCC 2012). The ENCSEVA ecoregion encompasses the northern third of the SALCC geography and offers a unique opportunity to apply landscape conservation at multiple scales through the guidance of local conservation and natural resource management efforts and by reporting metrics that reflect the effectiveness of those efforts (Figure 1). The Environmental Decision Analysis Team, housed within the North Carolina Cooperative Fish and Wildlife Research Unit at North Carolina State University, is assisting the ENCSEVA team in developing a scientifically sound basis for the Plan though the elicitation of expert knowledge and the organization of that knowledge using the Open Standards for the Practice of Conservation. The Open Standards for the Practice of Conservation is a framework that is well suited to incorporating decision-making tools such as Structured Decision Making and provides a multi-step process to conceptually organize conservation projects in a manner that enhances the rigor and transparency of expert and knowledge-based plans. It helps define explicit pathways from 2 planned conservation activities and ultimate impact, as well as indicators to measure success (Stem et al. 2005). Specifically, the framework identifies conservation targets, key ecological attributes, threats, and associated indicators to monitor responses given the implementation of a conservation action (Conservation Measures Partnership 2007). This report serves to provide a scientific foundation for the Plan by summarizing the expert opinion of wildlife biologists, ecologists, hydrologists, researchers, natural resource managers, and conservation practitioners regarding five environments (wetlands, riverine systems, estuaries, uplands, and barrier islands) within the ENCSEVA geography. Specifically, this report describes (1) the approach to elicit expert knowledge meant to support the strategic plan, (2) how this knowledge can inform collaborative conservation planning, and (3) a summary of opportunities available for the ENCSEVA team to address threats and impacts associated with climate change within the ecoregion.

Technical Bulletin↗