USGS Science⌕ Search

SEARCH · USGS Science

Results for “Soil Dynamics and Earthquake Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,696 records · Page 71Linked to original sources
USGS1977

Summary of results from electromagnetic and galvanic soundings on Kilauea Iki lava lake, Hawaii

The purpose of this report is to summarize various electrical sounding studies made on the Kilauea Iki lava lake and to present some of the preliminary interpretations that resulted from the measurements. The following discussion is not intended as a complete interpretation, but is intended to summarize the major points made in an invited oral presentation at the American Geophysical Union fall meeting held in San Francisco, Calif. on December 6, 1976. This paper was part of a group of papers dealing with various geophysical studies recently made on the Kilauea Iki lava lake. A general plan map of Kilauea Iki lava lake is shown in figure 1. Electromagnetic (EM) loop-loop soundings, D.C. resistivity soundings, and VLF apparent resistivity measurements were made on the lave lake surface. All of these surveys were made to determine the geoelectric structure of the lava lake and to determine parameters of the molten basaltic lens that exist in the partially solidified lava lake.

Hawaii↗
USGS2025

The 3D Elevation Program—Supporting the economy of Massachusetts

Introduction Massachusetts extends from the mountains of the Appalachian system in the west of the State to the sandy beaches and rocky shorelines of the Atlantic coast in the east. Inland topographic data support a wide range of important activities, including geologic mapping, transportation planning, forest and wildlife management, quantifying ecological services, water supply protection, commonwealth-wide infrastructure planning, local site planning, and flood-plain management. Nearshore bathymetry can be used to support coastal portions of the Commonwealth by addressing the combined threats of ocean warming, strong storm surge, and rising sea levels. The maintenance and (or) expansion of Massachusetts ports (for instance, Boston, New Bedford) and Cape Cod sediment management depends upon the accurate mapping of bathymetry and the frequent influx of sediment and redeposition. Critical applications that address the broad range of requirements depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Massachusetts. The status of available and in-progress 3DEP baseline lidar data in Massachusetts is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $1.23 million in new benefits annually to Massachusetts. The top 10 Massachusetts business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Massachusetts↗
USGS2025

Near-surface geophysics: Environmental applications

The field of geophysics encompasses a broad and diverse compilation of methodologies that employs principles of physics to characterize properties of earth materials within the subsurface. While geophysical methods have a long history in resource exploration and studies of Earth’s interior, the subdiscipline of “near-surface geophysics” has evolved in recent decades for examination of the shallow, near-surface environment for a range of purposes ranging from archaeological or forensic investigations to assessment of geologic, hydrologic, biologic, and geochemical properties and processes. “Environmental geophysics” are near-surface geophysical studies and methods that focus on understanding natural systems (e.g., watershed hydrology, groundwater–surface water connections, biophysical processes) as well as research pertaining to anthropogenic impacts and land management, (e.g., contamination and remediation, saltwater intrusion, agricultural practices). This field can be further subdivided into subdisciplines focused on specific topics and applications, such as water resources and hydrology (hydrogeophysics) or biologic and microbial processes (biogeophysics). Studies in environmental geophysics span a range of scales, from pore-scale laboratory tests to watershed-scale or regional field experiments. Methods vary by the nature of physics employed, the specific measurement acquired, and how that data is ultimately processed and analyzed to produce interpretable results. There exists further diversity in the acquisition logistics, geometry, and timing of data collection. Geophysical data can be collected in boreholes (one-dimensional, 1-D, vertical profiles), along survey lines (two-dimensional, 2-D, cross-sections), or in dense sensor arrays or gridded profiles (three-dimensional, 3-D, models). Regarding the temporal aspect, studies can conduct one-time geophysical surveys to obtain detailed imaging of subsurface structure or use timelapse and continuous monitoring to investigate variations in subsurface properties over time. The cumulation of all possible permutations of these factors (method, acquisition geometry, survey design, and target application) results in an immense diversity among environmental geophysical studies. Nevertheless, this field remains unified in the pursuit of understanding natural and human-impacted near-surface environments through geophysical investigations. Here we highlight some key references within environmental geophysics. Resources on geophysical theory, acquisition logistics, processing and inversion workflows, and example case studies are categorized into the most common geophysical classes within Geophysical Methods. Lastly, example references for the dominant types of applications in environmental geophysical studies are catalogued in Environmental Applications.

Book chapter↗
USGS2023

Eruptive history within the vicinity of Al Madīnah in northern Harrat Rahat, Kingdom of Saudi Arabia

The northernmost part of the Harrat Rahat volcanic field contains early Pleistocene to Holocene mafic eruptive products within the vicinity of the city of Al Madīnah, Kingdom of Saudi Arabia. A detailed geologic investigation into the eruptive history of a 570 square kilometer (km 2 ) area covering Al Madīnah and the surrounding area has yielded 33 mapped Quaternary volcanic units consisting of lava flows, scoria cones, and shield volcanoes. These eruptive products consist of continental, intraplate alkalic and minor transitional basalts, hawaiites, and a single mugearite that were emplaced from at least 1,014±14 thousand years ago (ka) to a single Holocene eruption in 1256 C.E. Lava flows are generally 10 to 15 kilometers (km) long (but can reach 23 km long), 1 to 3 km wide, and at least 10 meters thick. Most of the mapped units erupted episodically between 400 and 340 ka and 180 and 100 ka. Despite small individual volumes (less than 1 cubic kilometers dense rock equivalent), each unit represents eruption of a distinct magma batch that was strongly influenced by clinopyroxene, olivine, and plagioclase fractionation. Some of these units are interpreted to have undergone magma mixing pre- and (or) syneruptively. Integrating eruption ages, geochemistry, and paleomagnetic data yields evidence that some eruptions were temporally and (or) spatially clustered. Aligned scoria cones and elongate vent edifices were constructed atop fissure vent systems that reflect the local stress field, which controls dike ascent through the middle and upper crust.

Professional Paper↗
USGS2026

Arsenic and isotope concentrations in the lower Platte River valley of eastern Nebraska, early 1970s to 2023

The City of Lincoln, Nebraska, has been monitoring concentrations of arsenic in their source water and evaluating their options for treatment and removal since at least 2002. In 2022, the City of Lincoln, Nebr., with funding assistance from the Nebraska Water Sustainability Fund, began cooperating with the U.S. Geological Survey to examine arsenic concentrations in surface water and groundwater in the lower Platte River valley and the area around City of Lincoln Water System (LWS) well field. Arsenic data collected from the Platte River since 1974 were examined using the “weighted regression on time, discharge, and season” model, which compared the streamflow (also referred to as “discharge”), time of year, and season to estimate concentrations of arsenic. Annual mean arsenic concentrations modeled for more than 49 years at the Platte River at Louisville, Nebr., U.S. Geological Survey streamgage (station 06805500), indicated a significant increasing trend. Arsenic concentrations in the Platte River were seasonal, with the highest concentrations being observed during mid- to late summer. When seasonal patterns and streamflow were combined with arsenic concentrations in the Platte River during low streamflow conditions, groundwater contributions, which can have higher arsenic concentrations, make up a larger portion of the streamflow. Arsenic samples were collected from upstream rivers in 2022 and 2023 and were paired to analyze the arsenic contributions at the U.S. Geological Survey streamgage on the Platte River near Ashland, Nebr. (station 06801000), near the City of Lincoln well field. The arsenic concentrations from the streamgage on the Platte River near Ashland, Nebr., location, were higher than the U.S. Geological Survey streamgage on the Elkhorn River at Waterloo, Nebr. (station 06800500), and significantly lower than at the U.S. Geological Survey streamgage on the Platte River near Leshara, Nebr.(station 06796500), indicating that the Platte River usually contributes a higher concentration of arsenic than does the Elkhorn River as they join near Ashland, Nebr. During 1991–2023, six groundwater monitoring wells were analyzed to identify trends in arsenic concentrations. Two of the six wells had a positive trend during the 33-year period. One monitoring well did not reveal a long-term trend during this period but showed a trend during 2019–23, correlating to a period when the island in the middle of the Platte River was connected to the east bank of the river when manganese reducing conditions were present and groundwater levels were declining in the well. Across all wells the oxidation and reduction (redox) condition during the time of sampling was assessed. Mixed anoxic and (or) oxic redox condition was the most common redox process and the highest sampled arsenic concentrations in monitoring wells were observed in anoxic conditions driven by manganese reduction. Groundwater arsenic concentrations had seasonal variation around the City of Lincoln well field, with higher arsenic concentrations tending to be further south in comparison to samples collected further north. Isotope samples were collected and analyzed in surface water and groundwater around the LWS well field. The samples indicate that the proportion of surface water present in the LWS production wells can be higher in the spring and lower in the summer. With higher arsenic concentrations observed in the stream water during the summer period, the LWS source water can be affected by these elevated arsenic concentrations even though the proportion of surface water is lower.

Nebraska↗
USGS2024

Estimation of reservoir storage capacity and geomorphic change detection analysis from a multibeam bathymetric survey of Randy Poynter Lake, Rockdale County, Georgia

Rockdale County Department of Water Resources has a directive to update estimates of the reservoir storage capacity of Randy Poynter Lake, located in northern Georgia, and to assess recent sedimentation and associated storage capacity loss. In 2022, the U.S. Geological Survey completed a multibeam bathymetric survey of Randy Poynter Lake to update storage capacity estimates and to quantify storage capacity change since the first multibeam bathymetric survey in 2012 in consideration of estimated errors inherent to bathymetric surveys. Data from the 2022 survey were used to generate contours of the reservoir as well as compute storage capacity at regular increments of water-surface elevation. Storage capacity comparisons between 2012 and 2022 at Randy Poynter Lake show minimal changes that are within the estimated uncertainties, with consistent or slightly increased storage capacities observed at most water-surface elevations and reductions observed at the remaining few elevations. Comparison of the multibeam bathymetric data collected in 2012 with data collected in 2022 further allowed for a formal geomorphic change detection analysis to map, quantify, and infer causation of morphological change over time with respect to a level of detectable change. The volume change in Randy Poynter Lake for the decade between 2012 and 2022 was slightly net-depositional and within the estimated uncertainty. The spatial distribution of sediment deposition was primarily concentrated in the northern portion of the lake, where the principal tributary flows into Randy Poynter Lake. The results of the geomorphic change analysis were used to further understand the future implications to storage capacity change. Despite the challenges of confirming systematic biases because of uncertainties exceeding the observed changes, insights from the study help predict long-term reservoir sediment accumulation, indicating a reservoir half-life extending about 650 years from 2022 on the basis of the current sediment yield estimates.

Georgia↗
USGS1998

Assessment of the hydraulic connection between ground water and the Peace River, west-central Florida

The hydraulic connection between the Peace River and the underlying aquifers along the length of the Peace River from Bartow to Arcadia was assessed to evaluate flow exchanges between these hydrologic systems. Methods included an evaluation of hydrologic and geologic records and seismic-reflection profiles, seepage investigations, and thermal infrared imagery interpretation. Along the upper Peace River, a progressive long-term decline in streamflow has occurred since 1931 due to a lowering of the potentiometric surface of the Upper Floridan aquifer by as much as 60 feet because of intensive ground-water withdrawals for phosphate mining and agriculture. Another effect from lowering the potentiometric surface has been the cessation of flow at several springs located near and within the Peace River channel, including Kissengen Spring, that once averaged a flow of about 19 million gallons a day. The lowering of ground-water head resulted in flow reversals at locations where streamflow enters sinkholes along the streambed and floodplain. Hydrogeologic conditions along the Peace River vary from Bartow to Arcadia. Three distinctive hydrogeologic areas along the Peace River were delineated: (1) the upper Peace River near Bartow, where ground-water recharge occurs; (2) the middle Peace River near Bowling Green, where reversals of hydraulic gradients occur; and (3) the lower Peace River near Arcadia, where ground-water discharge occurs. Seismic-reflection data were used to identify geologic features that could serve as potential conduits for surface-water and ground-water exchange. Depending on the hydrologic regime, this exchange could be recharge of surface water into the aquifer system or discharge of ground water into the stream channel. Geologic features that would provide pathways for water movement were identified in the seismic record; they varied from buried irregular surfaces to large-scale subsidence flexures and vertical fractures or enlarged solution conduits. Generally, the upper Peace River is characterized by a shallow, buried irregular top of rock, numerous observed sinkholes, and subsidence depressions. The downward head gradient provides potential for the Peace River to lose water to the ground-water system. Along the middle Peace River area, head gradients alternate between downward and upward, creating both recharging and discharging ground-water conditions. Seismic records show that buried, laterally continuous reflectors in the lower Peace River pinch out in the middle Peace River streambed. Small springs have been observed along the streambed where these units pinch out. This area corresponds to the region where highest ground-water seepage volumes were measured during this study. Further south, along the lower Peace River, upward head gradients provide conditions for ground-water discharge into the Peace River. Generally, confinement between the surficial aquifer and the confined ground-water systems in this area is better than to the north. However, localized avenues for surface-water and ground-water interactions may exist along discontinuities observed in seismic reflectors associated with large-scale flexures or subsidence features. Ground-water seepage gains or losses along the Peace River were quantified by making three seepage runs during periods of: (1) low base flow, (2) high base flow, and (3) high flow. Low and high base-flow seepage runs were performed along a 74-mile length of the Peace River, between Bartow and Nocatee. Maximum losses of 17.3 cubic feet per second (11.2 million gallons per day) were measured along a 3.2-mile reach of the upper Peace River. The high-flow seepage run was conducted to quantify losses in the Peace River channel and floodplain between Bartow and Fort Meade. Seepage losses calculated during high-flow along a 7.2-mile reach of the Peace River, from the Clear Springs Mine bridge to the Mobil Mine bridge, were approximately 10 percent of the river flow, or 118 cubic feet per second. Calculated seepages along the Peace River in Hardee and De Soto Counties were inconclusive, because most seepages were within the range of discharge measurement error. Two continuous aerial thermal infrared imagery surveys were conducted to locate sites of ground-water discharge along the Peace River. Although temperature and hydrologic conditions were ideal to observe spring flow using thermal infrared imaging techniques, no sources of ground-water discharge were identified using this method. Diffuse ground-water seepage may, however, provide significant ground-water discharge.

Florida↗
USGS2025

Stories in stone: The geoheritage significance of U.S. National Park Service stratotypes

The U.S. National Park Service stratotype inventory has systematically documented hundreds of published stratotypes across the country that represent a quintessential component of America’s geoheritage and possess significant scientific, educational, cultural, historic, and aesthetic values. As valuable geologic reference standards, stratotypes record intervals of Earth history relating to our nation’s unique geologic evolution, biological progression, cultural traditions, historical narratives, and stunning landforms. However, the general lack of awareness and knowledge regarding the scope, significance, distribution, and scale of stratotypes can result in these resources being overlooked. Consequently, stratotypes may inadvertently experience accidental alteration, damage, or destruction through both natural and anthropogenic processes. As with many American geoheritage sites, stratotypes lack specific recognition through legislation, policies, or other management strategies to ensure their preservation and protection. Through education and outreach, we hope to inform, increase awareness, and engage the public about these internationally and nationally significant geologic reference sites, unite various geoheritage communities, and promote their preservation for future generations.

Geoheritage↗
USGS2026

A practical decision tool for marine bird mortality assessments

Given the rise in anthropogenic, environmental, and disease events contributing to marine bird mortality, there is a critical need to improve the rigor of mortality assessments. Deficits in data collection and mortality estimation can hinder a manager’s ability to document the scale of events and assess population level impacts. Therefore, to inform decisions required during activities, such as conservation status assessments or harvest management, organizations may choose to incorporate mortality assessments into response plans. Resources, capacity, and assets to assess mortality vary across jurisdictions (federal, state, Indigenous, local, etc.), and clear guidance to support mortality assessments is often unavailable or not clearly addressed. Here, we present a decision support tool to help managers identify and evaluate survey options to assess bird mortality in a diverse array of scenarios. The objective of the decision tool is to improve data collection and availability, which will increase the ability to estimate mortality robustly, given situation-specific attributes and constraints. This decision tool is designed to guide the response when a mortality event is initially encountered and offers suggestions for assessment and reporting procedures in the absence of other guidance or to complement existing protocols. The decision tool is also meant to inform decision making for response determination and resource allocation. The tool facilitates examination of options for further assessment and monitoring, which users determine by examining questions pertaining to species prioritization, determination of mortality minimum spatial extent, and the potential magnitude of impacts on affected species. Finally, identification of appropriate survey methods that address imperfect detection when a complete census is not possible are determined by exploring location, spatial and temporal extent, and the type of species affected. Ultimately, this decision tool aims to facilitate and improve the standardization of mortality assessments, equipping managers with a practical resource to navigate the decision-making process for marine bird mortality estimation.

Ornithological Applications↗
USGS2026

Teach me how to pycap: A high-capacity well decision support tool using analytical solutions in Python

Regulatory agencies in humid temperate environments rely on timely evaluations of streamflow depletion and drawdown to protect aquatic ecosystems and existing water users. Numerical models offer detailed insights, but their complexity and time demands often preclude their practical use in rapid decision-making. We present pycap-dss, an open-source Python package that implements a suite of analytical solutions for estimating streamflow depletion and drawdown. The tool supports superposition of multiple wells and time-varying pumping, enabling cumulative impact assessments in situations with multiple wells and streams. The software is modular and extensible, allowing users to interchange solutions or add new analytical methods. A YAML-based configuration supports batch processing of multiple wells, and an optional AnalysisProject class facilitates integration with regulatory workflows. Rigorous unit and regression testing ensures computational reliability, and continuous integration supports ongoing development. We demonstrate deterministic examples of drawdown where multiple solutions are readily compared and streamflow depletion with multiple wells in the Central Sands region of Wisconsin. We also show the value of Monte Carlo analyses of streamflow depletion in the same Central Sands example, leveraging computational efficiency to evaluate the uncertainty of individual and cumulative streamflow depletion calculations from over 200 high-capacity wells.

Wisconsin↗
USGS2026

Keeping pace: Migrating sea lampreys adjust swim speed in response to shifting water velocity to maintain a constant ground speed

Upstream migrating fish must balance energetic costs with environmental and ecological constraints. Theoretical models predict that fish can conserve energy by adjusting swim speed in response to changing water velocity, but detailed field tests of these predictions remain rare. We used fine-scale acoustic telemetry and hydrodynamic modeling to track adult sea lamprey (Petromyzon marinus) migrating through a river and evaluated how movement speeds varied with environmental conditions and individual traits. Swim speed increased with faster water velocities, while ground speed remained constant, supporting the hypothesis that lampreys regulate swim effort to maintain a fixed migration pace. The average ground speed aligned with a predicted optimum of ∼1 body length per second. Both swim and ground speeds declined slightly in deeper water, suggesting a trade-off between movement efficiency and predator avoidance. These findings provide field-based support for a theoretical model of energy optimization and underscore how migratory fish adaptively adjust behavior to local hydrodynamic conditions. Our results highlight the value of using high-resolution tracking and environmental modeling to reveal behavioral tactics that underlie efficient migration strategies.

Michigan↗
USGS2024

Methodology for inclusion of produced and stored carbon dioxide in the U.S. Geological Survey Federal lands greenhouse gas inventory

The U.S. Geological Survey (USGS) has developed two new carbon dioxide (CO2) emissions and sequestration accounting methods for use in future reports. The first method is a Federal lease-produced CO2 emissions calculation for an update of the report, “Federal Lands Greenhouse Gas Emissions and Sequestration in the United States.” The methodology to incorporate Federal lease CO2 production emissions into the updated report relies on CO2 sales royalty data from the Office of Natural Resources Revenue (ONRR). The end usage points for the gas include enhanced oil recovery with CO2 (CO2-EOR), food and beverage, and chemical production. CO2-EOR is the main end point for natural CO2 production in the United States; it accounted for 94% of usage in 2022 [1]. Federal lands emissions from this sector are estimated at 460 metric tons of CO2 in 2022, a very small amount relative to most other Federal lands emissions sector estimates. The second new method, planned for a separate report, is a calculation of the geologic storage of CO2 on Federal lands. The second method estimates the CO2 stored under Federal surface lands and documents Federal climate change mitigation efforts. Currently, there is no storage of CO2 at an industrial level on Federal lands, however multiple proposals and projects are planned. This method was developed on non-Federal lands datasets in an effort to prepare for when these activities on Federal lands will require accounting. National estimates for CO2 geologic storage using this method, but without a Federal lands filtering step, totaled 8.0 million metric tons (Mt) in 2022. The two methods described here are new benchmark methods in a collection of accounting procedures to document the current state of greenhouse gas emissions and their storage on Federal lands. These benchmarks can then be used to measure any subsequent changes in emissions from or carbon storage beneath Federal lands. While the magnitude of the values is currently non-existent to small, emissions mitigation goals established by decision makers indicate that these values will grow, and their documentation will take on greater value and use.

continental United States↗
USGS2026

Detecting snow avalanche activity using infrasound: Hooker Valley, New Zealand

Snow avalanches pose considerable hazards to people and infrastructure in alpine environments. Traditional avalanche monitoring relies on meteorological data and visual observations, which can be limited in scope and timeliness. Infrasound offers a promising complementary monitoring tool by detecting the low-frequency sound waves generated by avalanches. Here, we present infrasound and camera observations during a 50-day field campaign in the Hooker Valley of Aoraki/Mount Cook National Park, New Zealand. Our study detected seven avalanches with the cameras, whereas the infrasound system identified only one of these events, which was the largest and occurred under conditions that likely favoured infrasound propagation. The infrasound system recorded numerous other events not captured by the cameras, indicating the benefit of further investigation to determine their sources. These findings highlight the potential of infrasound technology for detecting avalanches and providing broad spatial coverage, capturing events in areas not monitored by cameras, while also showcasing limitations in infrasound capabilities. The limited detection of smaller avalanches underscores the opportunity for further research to enhance detection capabilities and understand environmental influences such as snow cover and wind noise. Overall, this study emphasises the utility of multidisciplinary monitoring techniques to improve avalanche detection in alpine environments.

Hooker Valley↗
USGS2025

The influence of nodule versus crust morphology on the composition of seamount-hosted ferromanganese minerals

Ferromanganese mineral precipitation in the global oceans is ubiquitous, occurring in the form of both crusts and nodules at a broad range of depths and seafloor terrains. Although ferromanganese crusts and nodules are both composed of ferromanganese minerals, mineralogy and mean element concentrations compiled for regional crust versus nodule occurrences differ. Notably, most published compilations compare nodules from abyssal plain sediments to crusts forming on seamounts, and do not address the question as to whether mineral morphology may affect the composition of crusts and nodules in addition to environmental factors. To address this, we have compiled a dataset of co-located hydrogenetic (seawater sourced) open-ocean ferromanganese crusts and seamount-hosted nodules. The preliminary data presented here support our hypothesis that co-located crusts and nodules exhibit similar compositions, both in terms of their mineralogy and mean element concentrations, as well as overall variance in concentrations for any given element. These data indicate that local processes influence sample-to-sample variation in both crusts and nodules, in contrast to broader ferromanganese variation reported between open-ocean seamounts- hosted crusts and abyssal plain-hosted nodules.

Conference Paper↗
USGS2025

Using hydrogeologic context and water budgets to evaluate the potential for groundwater contributions to contaminants in Lake Superior

This study presents a synthesis of the hydrogeology in the U.S. Lake Superior watershed and the contribution of groundwater to the water budget of the U.S. Lake Superior basin. Much of the shoreline of Lake Superior in Minnesota and Michigan is composed of hydrogeologic units contributing very little direct groundwater discharge to the lake. Groundwater in watersheds adjacent to the lake typically flows in short, local flow systems characterized by thin glacial sediments with active groundwater flow in fractured bedrock within the top 60–90 m below land surface. The complex groundwater system in Wisconsin’s Bayfield Peninsula has the largest groundwater reservoir near the lake, characterized by thick sand and gravel glacial deposits and underlying sandstone aquifer. Although these thick sandy glacial deposits are not in direct contact with the lake at the shoreline, groundwater discharge may still be significant via subsurface exposures beyond the shoreline or flow through the underlying sandstone aquifer. Overall, most groundwater in the watershed is contributed as indirect base flow in streams around the lakeshore and comprises about 60 percent of the upland water budget. Direct groundwater flow to the shoreline contributes 2 to 9 percent of the inflow. Identifying possible contamination sources through direct sampling of groundwater would be an inefficient way to detect problems if sources are unknown, particularly for some chemicals of concern such as PFAS, pesticides, PCBs, chloride, and nutrients. Evaluating the chemical characteristics of contamination is also important to consider in evaluating how groundwater may contribute to pollution in Lake Superior.

Lake Superior↗
USGS2025

Chemical and isotopic fractionation during melt inclusion formation

Melt inclusions are used to study the origin and evolution of magmas. The extent to which they represent equilibrium melt compositions, however, critically hinges on the ratio of crystal growth rate to diffusion rate in melts. If the rate of crystal growth is limited by the supply of nutrients and the dissipation of unwanted components, the trapped melt will be depleted in compatible elements and enriched in incompatible elements. Despite widespread recognition of the potential for melt inclusions to trap disequilibrium compositions, their identification remains a challenge. Here, we demonstrate how stable isotopes provide a solution to this problem. Melt inclusions in basaltic tephra from Kīlauea volcano, Hawai‘i, display Mg isotope fractionation up to 0.49‰ ( 26 Mg/ 24 Mg) relative to bulk rock. These observations indicate that kinetic processes, such as chemical diffusion, are at play, as equilibrium mineral-melt isotope fractionation at high temperatures is an order of magnitude smaller. We propose that the heavy Mg isotopic compositions of the melt inclusions were generated by the faster diffusion and thus preferential incorporation of 24 Mg by the growing olivine, leaving the slower diffusant ( 26 Mg) behind. The incompatible elements (e.g., Ca, Ti, and K) are predicted to display similarly large fractionations when boundary layer effects are significant. These findings show that stable isotopes can be a useful tool in identifying disequilibrium compositions in melt inclusions.

Geology↗
USGS2025

Analysis of aquifer framework and properties, Alvahs Lane well field, Cutchogue, New York

The U.S. Geological Survey, in cooperation with the Suffolk County Water Authority, evaluated the aquifer transmissivity and storage properties at the Alvahs Lane well field north of the village of Cutchogue, New York. This analysis of aquifer properties provides the Suffolk County Water Authority with hydrogeologic information needed to develop water supplies to meet the increasing water demands of the residents of Suffolk County, New York. An aquifer test was conducted at the Alvahs Lane well field from October 18 through October 21, 2022, when a production well was pumped at 550 gallons per minute for about 24 hours, and groundwater-level drawdown and recovery were measured in two monitoring wells. The three wells are screened in a glaciofluvial aquifer under unconfined (water table) conditions. Drawdown and recovery data were analyzed with an analytical solution for partial penetration and delayed yield in an unconfined aquifer to provide estimates of the glaciofluvial aquifer properties. Inclusion of lateral aquifer boundaries was not necessary for the analysis to result in satisfactory matches with the observed water-level responses. Aquifer transmissivity was estimated at 32,000 feet squared per day. Assuming a saturated aquifer thickness of 120 feet, this result is equivalent to a horizontal hydraulic conductivity value of 270 feet per day. Specific yield was estimated at 0.15 (dimensionless). The estimated properties are consistent with those of a highly transmissive unconfined aquifer.

New York↗
USGS2025

Ultramafic float rocks at Jezero crater (Mars): Excavation of lower crustal rocks or mantle peridotites by impact cratering?

Based on observation and data from meteorites and in situ scientific missions, experiments as well as models, the Martian mantle is assumed to share some compositional and mineralogical affinity with the terrestrial mantle. However, there might be subtle differences like the Martian mantle being more ferroan. Yet, we do not have any direct analysis of a Martian mantle rock to confirm this assumption. NASA’s Perseverance rover found olivine-rich boulder-sized float rocks on the upper Jezero fan (Mars). These boulders have an ultramafic composition and their mineralogy is dominantly composed of Fo 73±3 olivine with high-Mg orthopyroxene, Cr-rich Ti-Fe oxides and minor plagioclase and high-Ca pyroxene. Microtextural and petrological analysis reveals that these minerals crystallized at equilibrium. In addition, these boulders are different from all the bedrocks analyzed by Perseverance along its traverse which are crustal igneous rocks and sediments. Comparing our data to Martian meteorites and available Mars bulk silicate models (BSM), we discuss that these boulders could represent primitive melts and/or lower crustal material, and we specifically hypothesize that they could be mantle peridotites. We propose that these putative mantle rocks could have been excavated by the succession of impacts from the shallow mantle or lower crust in the Isidis region where Jezero crater is located. These olivine-rich boulders could thereby constitute the first direct analysis of a Martian mantle rock.

Earth and Planetary Science Letters↗