USGS Science⌕ Search

SEARCH · USGS Science

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71Linked to original sources

Titanium mineral resources in heavy-mineral sands in the Atlantic coastal plain of the southeastern United States

This study examined titanium distribution in the Atlantic Coastal Plain of the southeastern United States; the titanium is found in heavy-mineral sands that include the minerals ilmenite (Fe 2+ TiO 3 ), rutile (TiO 2 ), or leucoxene (an alteration product of ilmenite). Deposits of heavy-mineral sands in ancient and modern coastal plains are a significant feedstock source for the titanium dioxide pigments industry. Currently, two heavy-mineral sands mining and processing operations are active in the southeast United States producing concentrates of ilmenite-leucoxene, rutile, and zircon. The results of this study indicate the potential for similar deposits in many areas of the Atlantic Coastal Plain. This study used the titanium analyses of 3,457 stream sediment samples that were analyzed as part of the U.S. Geological Survey’s National Geochemical Survey program. This data set was analyzed by an integrated spatial modeling technique known as Bayesian hierarchical modeling to map the regional-scale, spatial distribution of titanium concentrations. In particular, clusters of anomalous concentrations of titanium occur: (1) along the Fall Zone, from Virginia to Alabama, where metamorphic and igneous rocks of the Piedmont region contact younger sediments of the Coastal Plain; (2) a paleovalley near the South Carolina and North Carolina border; (3) the upper and middle Atlantic Coastal Plain of North Carolina; (4) the majority of the Atlantic Coastal Plain of Virginia; and (5) barrier islands and stretches of the modern shoreline from South Carolina to northeast Florida. The areas mapped by this study could help mining companies delimit areas for exploration.

Scientific Investigations Report↗

Geologic features and ground-water storage capacity of the Sacramento Valley, California

The Sacramento Valley constitutes the northern and smaller arm of the Central Valley of California. It is about 150 miles long by about 30 miles wide; and its area is about 5,000 square miles. The Sacramento Valley is drained by the Sacramento River, the largest in California, which rises west of Mount Shasta and flows southward to join the San Joaquin River near Suisun Bay and discharges through San Francisco Bay to the Pacific. Most of the valley floor is suitable for growing crops, and under irrigation the land is highly productive. The Sacramento Valley is underlain by sediments transported from the surrounding mountains by the Sacramento River and its tributaries. The floor of the valley slopes southward from about 300 feet above sea level at the north end near Red Bluff to sea level at Suisun Bay. The Sutter Buttes, which are erosional remnants of an old volcano rise to 2,132 feet above sea level near the center of the valley. The valley floor is not a featureless plain but is characterized by various types of topography, which have been assigned to four principal groups: 1, low hills and dissected alluvial uplands; 2, low alluvial plains and fans; 3, flood plains and natural levees; and 4, flood basins; a fifth and relatively minor group consists of the tidal Islands of the Sacramento-San Joaquin Delta, which are south of the principal area of investigation. The rocks that underlie the Sacramento Valley and the bordering mountains range from crystalline rocks of Paleozoic and Mesozoic age to unconsolidated alluvium of Recent age. These rocks have been subdivided into 20 geologic units which may be assigned to 2 broad categories: rocks that yield little water and rocks that yield water freely. The rocks of the first category are chiefly marine sedimentary rocks of Late Jurassic, Cretaceous, and Early Tertiary age and a basement complex of pre-Tertiary crystalline rocks. The rocks of the second category consist predominantly of nonmarine valley-filling sediments of late Tertiary and Quaternary age, which constitute the principal ground-water reservoir in the Sacramento Valley. The rocks that yield little or no water includes the following geologic units: 1, Basement complex of the Sierra Nevada (pre-Tertiary); 2, Shasta series (Lower Cretaceous); 3, Chico formation (Upper Cretaceous); 4, Paleocene series; 5, Eocene series (in part, water yielding); 6, basalt (Tertiary); 7, sedimentary rocks of volcanic origin on the west side of the Sacramento Valley (Tertiary, in part water yielding) ; 8, intrusive rhyolite and andesite and vent tuff of the Sutter Buttes (Pliocene); and 9, tuff-breccia of the Sutter Buttes (Pliocene, in part water yielding). The rocks that yield water freely, comprises the following geologic units: 1, Volcanic rocks from the Sierra Nevada (Eocene to Pliocene; in part yield little or no water); 2, Tuscan formation (Pliocene; in part yield little or no water); 3, Tehama formation (Pliocene); 4, Tehama formation and related continental sediments, undifferentiated (Pliocene and Pleistocene); 5, Laguna formation and related continental sediments (Pliocene and Pleistocene); 6, fanglomerate from the Cascade Range (Pleistocene); 7, Red Bluff formation (Pleistocene); 8, Victor formation and related deposits (Pleistocene); 9, alluvial-fan deposits (Pleistocene and Recent); 10, river deposits (Recent); and 11, flood-basin deposits (Recent). The volcanic rocks from the Sierra Nevada consist chiefly of andesitic and rhyolitic detritus. Most of these volcanic rocks are fragmental and were deposited either as mudflows or by streams. Their permeability is extremely variable, the poorly consolidated sandstone and conglomerate strata locally yield water copiously to wells, but the interbedded fine-grained and cemented strata are virtually impermeable and act as confining layers. The Tuscan formation, which occurs in the northeastern part of the valley, consists of fragmental andesitic and basaltic mate

Water Supply Paper↗

Geochemical characterization of tarballs on beaches along the California coast. Part I - Shallow seepage impacting the Santa Barbara Channel Islands, Santa Cruz, Santa Rosa and San Miguel

Tarballs are common along the southern California coastline. This study investigates tarballs from beaches along this coastline, with a focus on Santa Cruz, Santa Rosa, and San Miquel Islands in the Santa Barbara Channel. The tarballs were fingerprinted using biomarker and stable carbon isotope parameters, and then grouped according to genetic similarities. The data show that the tarballs are of natural and not anthropogenic origin and that all originate from source rock within the Miocene Monterey Formation via shallow seeps offshore. Sterane biomarker parameters were found to vary widely in the sample set. Biodegradation, especially of the regular steranes, is the primary process impacting the biomarker distributions in a large group of samples. The most common tarball occurrences appear to come from offshore seepage near the west end of Santa Cruz Island. Another major group most likely was transported north from near Santa Monica Bay. Several individual occurrences of some of these tarball groups also were found on beaches as far north as Pt. Reyes and as far south as San Diego, indicating significant long-distance dispersal by ocean currents. This study begins a library of tarball fingerprints to be used as a database to help distinguish between natural and anthropogenic tar occurrences all along the California coast, and to compare shallow seepage with future samples of deeper production oils from the same area.

Organic Geochemistry↗

Geochemical analysis of Atlantic rim water, Carbon County, Wyoming: New applications for characterizing coalbed natural gas reservoirs

Coalbed natural gas (CBNG) production typically requires the extraction of large volumes of water from target formations, thereby influencing any associated reservoir systems. We describe isotopic tracers that provide immediate data on the presence or absence of biogenic natural gas and the identify methane-containing reservoirs are hydrologically confined. Isotopes of dissolved inorganic carbon and strontium, along with water quality data, were used to characterize the CBNG reservoirs and hydrogeologic systems of Wyoming’s Atlantic Rim. Water was analyzed from a stream, springs, and CBNG wells. Strontium isotopic composition and major ion geochemistry identify two groups of surface water samples. Muddy Creek and Mesaverde Group spring samples are Ca-Mg-SO4–type water with higher 87Sr/86Sr, reflecting relatively young groundwater recharged from precipitation in the Sierra Madre. Groundwaters emitted from the Lewis Shale springs are Na-HCO3–type waters with lower 87Sr/86Sr, reflecting sulfate reduction and more extensive water-rock interaction. To distinguish coalbed waters, methanogenically enriched d13CDIC was used from other natural waters. Enriched d13CDIC, between −3.6 and +13.3‰, identified spring water that likely originates from Mesaverde coalbed reservoirs. Strongly positive d13CDIC, between +12.6 and +22.8‰, identified those coalbed reservoirs that are confined, whereas lower d13CDIC, between +0.0 and +9.9‰, identified wells within unconfined reservoir systems

Wyoming↗

Stratigraphy and palaeoclimatic significance of Late Quaternary loess-palaeosol sequences of the Last Interglacial-Glacial cycle in central Alaska

Loess is one of the most widespread subaerial deposits in Alaska and adjacent Yukon Territory and may have a history that goes back 3 Ma. Based on mineralogy and major and trace element chemistry, central Alaskan loess has a composition that is distinctive from other loess bodies of the world, although it is quartz-dominated. Central Alaskan loess was probably derived from a variety of rock types, including granites, metabasalts and schists. Detailed stratigraphic data and pedologic criteria indicate that, contrary to early studies, many palaeosols are present in central Alaskan loess sections. The buried soils indicate that loess sedimentation was episodic, or at least rates of deposition decreased to the point where pedogenesis could keep ahead of aeolian input. As in China, loess deposition and pedogenesis are likely competing processes and neither stops completely during either phase of the loess/soil formation cycle. Loess deposition in central Alaska took place before, and probably during the last interglacial period, during stadials of the mid-Wisconsin period, during the last glacial period and during the Holocene. An unexpected result of our geochronological studies is that only moderate loess deposition took place during the last glacial period. Our studies lead us to conclude that vegetation plays a key role in loess accumulation in Alaska. Factors favouring loess production are enhanced during glacial periods but factors that favour loess accumulation are diminished during glacial periods. The most important of these is vegetation; boreal forest serves as an effective loess trap, but sparsely distributed herb tundra does not. Thus, thick accumulations of loess should not be expected where tundra vegetation was dominant and this is borne out by modern studies near the treeline in central Alaska. Much of the stratigraphic diversity of North American loess, including that found in the Central Lowlands, the Great Plains, and Alaska is explained by a new model that emphasizes the relative importance of loess production factors versus loess accumulation factors.

Quaternary Science Reviews↗

Petroleum geology and resources of the Amu-Darya basin, Turkmenistan, Uzbekistan, Afghanistan, and Iran

The Amu-Darya basin is a highly productive petroleum province in Turkmenistan and Uzbekistan (former Soviet Union), extending southwestward into Iran and southeastward into Afghanistan. The basin underlies deserts and semideserts north of the high ridges of the Kopet-Dag and Bande-Turkestan Mountains. On the northwest, the basin boundary crosses the crest of the Karakum regional structural high, and on the north the basin is bounded by the shallow basement of the Kyzylkum high. On the east, the Amu-Darya basin is separated by the buried southeast spur of the Gissar Range from the Afghan-Tajik basin, which is deformed into a series of north-south-trending synclinoria and anticlinoria. The separation of the two basins occurred during the Neogene Alpine orogeny; earlier, they were parts of a single sedimentary province. The basement of the Amu-Darya basin is a Hercynian accreted terrane composed of deformed and commonly metamorphosed Paleozoic rocks. These rocks are overlain by rift grabens filled with Upper Permian-Triassic rocks that are strongly compacted and diagenetically altered. This taphrogenic sequence, also considered to be a part of the economic basement, is overlain by thick Lower to Middle Jurassic, largely continental, coal-bearing rocks. The overlying Callovian-Oxfordian rocks are primarily carbonates. A deep-water basin surrounded by shallow shelves with reefs along their margins was formed during this time and reached its maximum topographic expression in the late Oxfordian. In Kimmeridgian-Tithonian time, the basin was filled with thick evaporites of the Gaurdak Formation. The Cretaceous-Paleogene sequence is composed chiefly of marine clastic rocks with carbonate intervals prominent in the Valanginian, Barremian, Maastrichtian, and Paleocene stratigraphic units. In Neogene time, the Alpine orogeny on the basin periphery resulted in deposition of continental clastics, initiation of new and rejuvenation of old faults, and formation of most structural traps. A single total petroleum system is identified in the Amu-Darya basin. The system is primarily gas prone. Discovered gas reserves are listed by Petroconsultants (1996) at about 230 trillion cubic feet, but recent discoveries and recent reserve estimates in older fields should increase this number by 40 to 50 trillion cubic feet. Reserves of liquid hydrocarbons (oil and condensate) are comparatively small, less than 2 billion barrels. Most of the gas reserves are concentrated in two stratigraphic intervals, Upper Jurassic carbonates and Neocomian clastics, each of which contains about one-half of the reserves. Reserves of other stratigraphic units?from Middle Jurassic to Paleogene in age?are relatively small. Source rocks for the gas are the Lower to Middle Jurassic clastics and coal and Oxfordian basinal black shales in the east-central part of the basin. The latter is probably responsible for the oil legs and much of the condensate in gas pools. Throughout most of the basin both source-rock units are presently in the gas-window zone. Traps are structural, paleogeomorphic, and stratigraphic, as well as a combination of these types. The giant Dauletabad field is in a combination trap with an essential hydrodynamic component. Four assessment units were identified in the total petroleum system. One unit in the northeastern, northern, and northwestern marginal areas of the basin and another in the southern marginal area are characterized by wide vertical distribution of hydrocarbon pools in Middle Jurassic to Paleocene rocks and the absence of the salt of the Gaurdak Formation. The other two assessment units are stratigraphically stacked; they occupy the central area of the basin and are separated by the regional undeformed salt seal of the Gaurdak Formation. The largest part of undiscovered hydrocarbon resources of the Amu-Darya basin is expected in older of these assessment units. The mean value of total assessed resources of the Amu-Darya basin is estimated

Bulletin↗

Geologic map and digital database of the Porcupine Wash 7.5 minute Quadrangle, Riverside County, southern California

This data set maps and describes the geology of the Porcupine Wash 7.5 minute quadrangle, Riverside County, southern California. The quadrangle, situated in Joshua Tree National Park in the eastern Transverse Ranges physiographic and structural province, encompasses parts of the Hexie Mountains, Cottonwood Mountains, northern Eagle Mountains, and south flank of Pinto Basin. It is underlain by a basement terrane comprising Proterozoic metamorphic rocks, Mesozoic plutonic rocks, and Mesozoic and Mesozoic or Cenozoic hypabyssal dikes. The basement terrane is capped by a widespread Tertiary erosion surface preserved in remnants in the Eagle and Cottonwood Mountains and buried beneath Cenozoic deposits in Pinto Basin. Locally, Miocene basalt overlies the erosion surface. A sequence of at least three Quaternary pediments is planed into the north piedmont of the Eagle and Hexie Mountains, each in turn overlain by successively younger residual and alluvial deposits. The Tertiary erosion surface is deformed and broken by north-northwest-trending, high-angle, dip-slip faults and an east-west trending system of high-angle dip- and left-slip faults. East-west trending faults are younger than and perhaps in part coeval with faults of the northwest-trending set. The Porcupine Wash database was created using ARCVIEW and ARC/INFO, which are geographical information system (GIS) software products of Envronmental Systems Research Institute (ESRI). The database consists of the following items: (1) a map coverage showing faults and geologic contacts and units, (2) a separate coverage showing dikes, (3) a coverage showing structural data, (4) a scanned topographic base at a scale of 1:24,000, and (5) attribute tables for geologic units (polygons and regions), contacts (arcs), and site-specific data (points). The database, accompanied by a pamphlet file and this metadata file, also includes the following graphic and text products: (1) A portable document file (.pdf) containing a navigable graphic of the geologic map on a 1:24,000 topographic base. The map is accompanied by a marginal explanation consisting of a Description of Map and Database Units (DMU), a Correlation of Map and Database Units (CMU), and a key to point-and line-symbols. (2) Separate .pdf files of the DMU and CMU, individually. (3) A PostScript graphic-file containing the geologic map on a 1:24,000 topographic base accompanied by the marginal explanation. (4) A pamphlet that describes the database and how to access it. Within the database, geologic contacts , faults, and dikes are represented as lines (arcs), geologic units as polygons and regions, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum and link it to other tables (.rel) that provide more detailed geologic information.

California↗

Geology of the Mineral and Lake Anna West Quadrangles, Virginia

This map product is a cooperator series publication and, as such, does not have a specific abstract. Geologic mapping for this map product was completed between 2014 and 2017, with most of the field work occurring between January 2016 and May 2017. Numerous foot traverses were completed along creeks and roads throughout the field area; the shore of Lake Anna was accessed by kayak to provide additional data. Distributions of soil units were considered when assigning bedrock type in areas where outcrop was lacking and helped to distinguish fluvial terrace deposits. Hill-shade raster images created from LiDAR datasets and geophysical data sets proved useful in the field to trace bedrock and surficial units. GPS location control and field data were collected and recorded in digital databases using a variety of geologic mapping applications for an iPad 3rd Gen Model A1403 and Motion C5v tablet using Fieldmove 2013.1. Structural measurements were also plotted on field maps. Data collected included lithology and the orientation of foliations, folds, lineations, joints, and faults. Representative rock samples of significant formations were thin-sectioned for petrographic analysis; a few samples from these and surrounding quadrangles were analyzed for zircon U-Pb geochronology and geochemistry.

Virginia↗

Production waters associated with the Ferron coalbed methane fields, central Utah: Chemical and isotopic composition and volumes

This study investigated the composition of water co-produced with coalbed methane (CBM) from the Upper Cretaceous Ferron Sandstone Member of the Mancos Shale in east-central Utah to better understand coalbed methane reservoirs. The Ferron coalbed methane play currently has more than 600 wells producing an average of 240 bbl/day/well water. Water samples collected from 28 wellheads in three fields (Buzzards Bench, Drunkards Wash, and Helper State) of the northeast-southwest trending play were analyzed for chemical and stable isotopic composition.Water produced from coalbed methane wells is a Na-Cl-HCO3 type. Water from the Drunkards Wash field has the lowest total dissolved solids (TDS) (6300 mg/l) increasing in value to the southeast and northeast. In the Helper State field, about 6 miles northeast, water has the highest total dissolved solids (43,000 mg/l), and major ion abundance indicates the possible influence of evaporite dissolution or mixing with a saline brine. In the southern Buzzards Bench field, water has variable total dissolved solids that are not correlated with depth or spatial distance. Significant differences in the relative compositions are present between the three fields implying varying origins of solutes and/or different water-rock interactions along multiple flow paths.Stable isotopic values of water from the Ferron range from +0.9??? to -11.4??? ?? 18O and -32??? to -90??? ?? 2H and plot below the global meteoric water line (GMWL) on a line near, but above values of present-day meteoric water. Isotopic values of Ferron water are consistent with modification of meteoric water along a flow path by mixing with an evolved seawater brine and/or interaction with carbonate minerals. Analysis of isotopic values versus chloride (conservative element) and total dissolved solids concentrations indicates that recharge water in the Buzzards Bench area is distinct from recharge water in Drunkards Wash and is about 3 ??C warmer. These variations in isotopes along with compositional variations imply that the Ferron reservoir is heterogeneous and compartmentalized, and that multiple flow paths may exist. ?? 2003 Published by Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗

Subsurface geology and oil and gas resources of Osage County, Oklahoma. Part 8, Parts of township 20 north, ranges 9 and 10 east, and township 21 north, ranges 8 and 9 east and all of township 21 north, range 10 east

The area whose subsurface geology and oil and gas resources are described in this report lies along the southern border of Osage County, Okla., and includes parts of T. 20 N., Rs. 9 and 10 E., and of T. 21 N., Rs. 8 and 9 E., and all of T. 21 N., R. 10 E. The towns of Osage and Prue are within the area; Cleveland, which is a mile south of the Arkansas River, is not far beyond its southwestern limit; and Tulsa is 10 miles east of its southeast corner. The production of oil and gas from the many fields in the five townships began as early as 1905, and drilling has continued up to the present. Oil or gas is produced from 13 zones at depths ranging from 250 to 2,600 feet. Of these zones, one is in the Ordovician system, one is at the contact of the Mississippian and the Pennsylvanian series, and all others are in the Pennsylvanian series. The five townships lie within a region that contains many oil and gas fields in the Bartlesville sand; the Red Fork sand is oil-bearing in a narrow belt in T. 21 N., R. 8 E.; and oil and gas are produced in small areas from the Taneha, Skinner, Squirrel, Cleveland, Jones, and Layton sands, the Mussehem and Peoples sand zone, the Okesa, Torpedo, and Clem Creek sand zone, and the Big lime and Peru sand zone. The rocks dip westward across the five townships at an average rate of about 38 feet to the mile as measured on the top of the Oswego lime. This regional dip is interrupted, however, by many anticlines, domes, synclines, and structural basins. The subsurface crests of most of the domes and anticlines are not directly under the crests as determined on the exposed rocks, and the dips of the deeper rocks are steeper and the structural closures greater in the buried rocks than in the exposed rocks. The exposed rocks are cut by several faults that trend northwest, but the data are insufficient to determine whether the deeply buried rocks, also, are displaced along the faults. This investigation has shown that there are a few localities not yet completely tested in this part of Osage County that may produce oil and gas and that a few producing oil fields have areas within or adjacent to them that have not been thoroughly prospected. It is pointed out that yields of oil and gas from limy reservoir rocks may be increased by acid treatment and that additional oil may be produced from some of the reservoir sands by repressuring them with gas or flooding them with water.

Oklahoma↗

Gas and Isotope Geochemistry of 81 Steam Samples from Wells in The Geysers Geothermal Field, Sonoma and Lake Counties, California

The Geysers geothermal field in northern California, with about 2000-MW electrical capacity, is the largest geothermal field in the world. Despite its importance as a resource and as an example of a vapor-dominated reservoir, very few complete geochemical analyses of the steam have been published (Allen and Day, 1927; Truesdell and others, 1987). This report presents data from 90 steam, gas, and condensate samples from wells in The Geysers geothermal field in northern California. Samples were collected between 1978 and 1991. Well attributes include sampling date, well name, location, total depth, and the wellhead temperature and pressure at which the sample was collected. Geochemical characteristics include the steam/gas ratio, composition of noncondensable gas (relative proportions of CO2, H2S, He, H2, O2, Ar, N2, CH4, and NH3), and isotopic values for deltaD and delta18O of H2O, delta13C of CO2, and delta34S of H2S. The compilation includes 81 analyses from 74 different production wells, 9 isotopic analyses of steam condensate pumped into injection wells, and 5 complete geochemical analyses on gases from surface fumaroles and bubbling pools. Most samples were collected as saturated steam and plot along the liquid-water/steam boiling curve. Steam-togas ratios are highest in the southeastern part of the geothermal field and lowest in the northwest, consistent with other studies. Wells in the Northwest Geysers are also enriched in N2/Ar, CO2 and CH4, deltaD, and delta18O. Well discharges from the Southeast Geysers are high in steam/gas and have isotopic compositions and N2/Ar ratios consistent with recharge by local meteoric waters. Samples from the Central Geysers show characteristics found in both the Southeast and Northwest Geysers. Gas and steam characteristics of well discharges from the Northwest Geysers are consistent with input of components from a high-temperature reservoir containing carbonrich gases derived from the host Franciscan rocks. Throughout the geothermal field, the carbon-isotopic composition of CO2 is consistent with derivation of carbon from Franciscan metasedimentary rocks. NH3 concentrations are high in most Geysers well fluids, and are 2-3 orders of magnitude greater than would be expected in a the gas phase exhibiting homogeneous equilibrium at normal reservoir temperatures and pressures. Evidently, NH3 is flushed from the Franciscan host rocks at a rate that exceeds the reaction rate for NH3 breakdown. Many wells show clear influence by fluids from reinjection wells where steam condensate has been pumped back into the geothermal reservoir. Six wells were resampled over the time period of this study. One of these six wells was strongly affected by a nearby injection well. Three of the six resampled wells showed some signs of decreasing liquid/ steam within the geothermal reservoir, consistent with 'drying out' of the reservoir due to steam withdrawal. However, two wells exhibited little change. Analyses of gases from five surface manifestations (fumaroles and bubbling pools) are roughly similar to the deeper geothermal samples in both chemical and isotopic composition, but are lower in soluble gases that dissolve in groundwater during transit toward the surface.

Open-File Report↗

Groundwater quality in the Western San Joaquin Valley study unit, 2010: California GAMA Priority Basin Project

Water quality in groundwater resources used for public drinking-water supply in the Western San Joaquin Valley (WSJV) was investigated by the USGS in cooperation with the California State Water Resources Control Board (SWRCB) as part of its Groundwater Ambient Monitoring and Assessment (GAMA) Program Priority Basin Project. The WSJV includes two study areas: the Delta–Mendota and Westside subbasins of the San Joaquin Valley groundwater basin. Study objectives for the WSJV study unit included two assessment types: (1) a status assessment yielding quantitative estimates of the current (2010) status of groundwater quality in the groundwater resources used for public drinking water, and (2) an evaluation of natural and anthropogenic factors that could be affecting the groundwater quality. The assessments characterized the quality of untreated groundwater, not the quality of treated drinking water delivered to consumers by water distributors. The status assessment was based on data collected from 43 wells sampled by the U.S. Geological Survey for the GAMA Priority Basin Project (USGS-GAMA) in 2010 and data compiled in the SWRCB Division of Drinking Water (SWRCB-DDW) database for 74 additional public-supply wells sampled for regulatory compliance purposes between 2007 and 2010. To provide context, concentrations of constituents measured in groundwater were compared to U.S. Environmental Protection Agency (EPA) and SWRCB-DDW regulatory and non-regulatory benchmarks for drinking-water quality. The status assessment used a spatially weighted, grid-based method to estimate the proportion of the groundwater resources used for public drinking water that has concentrations for particular constituents or class of constituents approaching or above benchmark concentrations. This method provides statistically unbiased results at the study-area scale within the WSJV study unit, and permits comparison of the two study areas to other areas assessed by the GAMA Priority Basin Project statewide. Groundwater resources used for public drinking water in the WSJV study unit are among the most saline and most affected by high concentrations of inorganic constituents of all groundwater resources used for public drinking water that have been assessed by the GAMA Priority Basin Project statewide. Among the 82 GAMA Priority Basin Project study areas statewide, the Delta–Mendota study area ranked above the 90th percentile for aquifer-scale proportions of groundwater resources having concentrations of total dissolved solids (TDS), sulfate, chloride, manganese, boron, chromium(VI), selenium, and strontium above benchmarks, and the Westside study area ranked above the 90th percentile for TDS, sulfate, manganese, and boron. In the WSJV study unit as a whole, one or more inorganic constituents with regulatory or non-regulatory, health-based benchmarks were present at concentrations above benchmarks in about 53 percent of the groundwater resources used for public drinking water, and one or more organic constituents with regulatory health-based benchmarks were detected at concentrations above benchmarks in about 3 percent of the resource. Individual constituents present at concentrations greater than health-based benchmarks in greater than 2 percent of groundwater resources used for public drinking water included: boron (51 percent, SWRCB-DDW notification level), chromium(VI) (25 percent, SWRCB-DDW maximum contaminant level (MCL)), arsenic (10 percent, EPA MCL), strontium (5.1 percent, EPA Lifetime health advisory level (HAL)), nitrate (3.9 percent, EPA MCL), molybdenum (3.8 percent, EPA HAL), selenium (2.6 percent, EPA MCL), and benzene (2.6 percent, SWRCB-DDW MCL). In addition, 50 percent of the resource had TDS concentrations greater than non-regulatory, aesthetic-based SWRCB-DDW upper secondary maximum contaminant level (SMCL), and 44 percent had manganese concentrations greater than the SWRCB-DDW SMCL. Natural and anthropogenic factors that could affect the groundwater quality were evaluated by using results from statistical testing of associations between constituent concentrations and values of potential explanatory factors, inferences from geochemical and age-dating tracer results, and by considering the water-quality results in the context of the hydrogeologic setting of the WSJV study unit. Natural factors, particularly the lithologies of the source areas for groundwater recharge and of the aquifers, were the dominant factors affecting groundwater quality in most of the WSJV study unit. However, where groundwater resources used for public supply included groundwater recharged in the modern era, mobilization of constituents by recharge of water used for irrigation also affected groundwater quality. Public-supply wells in the Westside study area had a median depth of 305 m and primarily tapped groundwater recharged hundreds to thousands of years ago, whereas public-supply wells in the Delta–Mendota study area had a median depth of 85 m and primarily tapped either groundwater recharged within the last 60 years or groundwater consisting of mixtures of this modern recharge and older recharge. Public-supply wells in the WSJV study unit are screened in the Tulare Formation and zones above and below the Corcoran Clay Member are used. The Tulare Formation primarily consists of alluvial sediments derived from the Coast Ranges to the west, except along the valley trough at the eastern margin of the WSJV study unit where the Tulare Formation consists of fluvial sands derived from the Sierra Nevada to the east. Groundwater from wells screened in the Sierra Nevada sands had manganese-reducing or manganese- and iron-reducing oxidation-reduction (redox) conditions. These redox conditions commonly were associated with elevated arsenic or molybdenum concentrations, and the dominance of arsenic(III) in the dissolved arsenic supports reductive dissolution of iron and manganese oxyhydroxides as the mechanism. In addition, groundwater from many wells screened in Sierra Nevada sands contained low concentrations of nitrite or ammonium, indicating reduction of nitrate by denitrification or dissimilatory processes, respectively. Geology of the Coast Ranges westward of the study unit strongly affects groundwater quality in the WSJV. Elevated concentrations of TDS, sulfate, boron, selenium and strontium in groundwater were primarily associated with aquifer sediments and recharge derived from areas of the Coast Ranges dominated by Cretaceous-to-Miocene age, organic-rich, reduced marine shales, known as the source of selenium in WSJV soils, surface water, and groundwater. Low sulfur-isotopic values (δ34S) of dissolved sulfate indicate that the sulfate was largely derived from oxidation of biogenic pyrite from the shales, and correlations with trace element concentrations, geologic setting, and groundwater geochemical modeling indicated that distributions of sulfate, strontium, and selenium in groundwater were controlled by dissolution of secondary sulfate minerals in soils and sediments. Elevated concentrations of chromium(VI) were primarily associated with aquifer sediments and recharge derived from areas of the Coast Ranges dominated by the Franciscan Complex and ultramafic rocks. The Franciscan Complex also has boron-rich, sodium-chloride dominated hydrothermal fluids that contribute to elevated concentrations of boron and TDS. Groundwater from wells screened in Coast Ranges alluvium was primarily oxic and relatively alkaline (median pH value of 7.55) in the Delta–Mendota study area, and primarily nitrate-reducing or suboxic and alkaline (median pH value of 8.4) in the Westside study area. Many groundwater samples from those wells have elevated concentrations of arsenic(V), molybdenum, selenium, or chromium(VI), consistent with desorption of metal oxyanions from mineral surfaces under those geochemical conditions. High concentrations of benzene were associated with deep wells located in the vicinity of petroleum deposits at the southern end of the Westside study area. Groundwater from these wells had premodern age and anoxic geochemical conditions, and the ratios among concentrations of hydrocarbon constituents were different from ratios found in fuels and combustion products, which is consistent with a geogenic source for the benzene rather than contamination from anthropogenic sources. Water stable-isotope compositions, groundwater recharge temperatures, and groundwater ages were used to infer four types of groundwater: (1) groundwater derived from natural recharge of water from major rivers draining the Sierra Nevada; (2) groundwater primarily derived from natural recharge of water from Coast Ranges runoff; (3) groundwater derived from recharge of pumped groundwater applied to the land surface for irrigation; and (4) groundwater derived from recharge during a period of much cooler paleoclimate. Water previously used for irrigation was found both above and below the Corcoran Clay, supporting earlier inferences that this clay member is no longer a robust confining unit. Recharge of water used for irrigation has direct and indirect effects on groundwater quality. Elevated nitrate concentrations and detections of herbicides and fumigants in the Delta–Mendota study area generally were associated with greater agricultural land use near the well and with water recharged during the last 60 years. However, the extent of the groundwater resource affected by agricultural sources of nitrate was limited by groundwater redox conditions sufficient to reduce nitrate. The detection frequency of perchlorate in Delta–Mendota groundwater was greater than expected for natural conditions. Perchlorate, nitrate, selenium, and strontium concentrations were correlated with one another and were greater in groundwater inferred to be recharge of previously pumped groundwater used for irrigation. The source of the perchlorate, selenium, and strontium appears to be salts deposited in the soils and sediments of the arid WSJV that are dissolved and flushed into groundwater by the increased amount of recharge caused by irrigation. In the Delta–Mendota study area, the groundwater with elevated concentrations of selenium was found deeper in the aquifer system than it was reported by a previous study 25 years earlier, suggesting that this transient front of groundwater with elevated concentrations of constituents derived from dissolution of soil salts by irrigation recharge is moving down through the aquifer system and is now reaching the depth zone used for public drinking water supply.

California↗

Hydrogeology and ground-water quality at a land reclamation site, Neshaminy State Park, Pennsylvania

At Neshaminy State park, the most important aquifer is the informally named 'Trenton gravel' of Pleistocene age, which consists of poorly sorted sand and gravel. This is underlain by less permeable crystalline rock that limits the downward movement of water. Up to 5 feet of Holocene (or perhaps Pleistocene) alluvium consisting of clay and silt was deposited above the Trenton gravel, but much of the surficial material is dredge spoil, mostly sand and silt from the Delaware River. Normally, ground water discharges to the Delaware River and Neshaminy Creek. However, because the Trenton gravel is confined by the alluvium and is hydraulically connected to the Delaware River throughout its entire thickness due to channel dredging, hydraulic-head variations in the river are readily transmitted to wells. Thus, flow is toward the Delaware River and Neshaminy Creek at low tide, but the river and and creek recharge the aquifer as the tide rises. In September 1981 and October 1983, infertile dredge spoil from the Delaware River at Neshaminy State Park was mixed with composted sewage sludge and seeded to grasses to produce a soil product that has not adversely affected ground-water quality as of March 1985. Analyses for pH, specific conductance, nutrients, and heavy metals in ground water at the beginning of the study indicate that the chemistry of the ground water in the dredge spoil at the site differs from that in the Trenton gravel. Analyses of ground-water samples collected after the first two sludge applications (120 tons per acre and 450 tons per acre), indicate that no significant change occurred in the chemistry of the samples from the Trenton gravel, whereas organic nitrogen increased temporarily in ground water from the dredge spoil 6 months after the larger of the two sludge applications, but quickly returned to background levels. The lack of chemical change with time in the ground water implies either that little of the more than 100 inches of precipitation that fell from April 1983 through March 1985 reached the water table or, more likely, that a mechanism exists beneath the soil- factory site that retards or prevents the downard migration of contaminants.

Pennsylvania↗

Geology and hydrology of the Edwards Aquifer in the San Antonio area, Texas

The Edwards aquifer, which is the sole source of water for the city of San Antonio, is one of the most permeable and productive carbonate aquifers in the United States. The aquifer is composed of extensively faulted, fractured, and cavernous limestone and dolomite of Early Cretaceous age lying within the Balcones fault zone a series of normal en echelon strike faults that separate the Edwards Plateau from the Gulf Coastal Plain in south Texas. Along segments of some faults, the entire thickness of the aquifer is displaced vertically, and these faults then act as barriers to downdip ground-water flow. The large porosity and exceptional permeability of the unconfined part of the Edwards aquifer result from the dissolution of limestone by circulating ground water and development of a cavernous network along fractures. The large porosity and permeability of the freshwater part of the confined Edwards aquifer result primarily from dedolomitization. The small permeability of the saline-water part of the confined aquifer is caused by the limited interconnection between the pores in the rock matrix and by the lack of substantial dissolution along fractures. The large transmissivity of the Edwards aquifer is indicated by the hundreds of highyielding wells, small hydraulic gradients, and large spring discharges. The determined transmissivity throughout most of the confined freshwater aquifer ranges from 430,000 to 2,200,000 feet squared per day; the determined transmissivity of the unconfined aquifer generally is less than 430,000 feet squared per day. Faulting causes the aquifer to be highly anisotropic, and simulation indicates anisotropy ratios ranging from 0.0:1 to 1:1. The ground-water-flow system of the Edwards aquifer includes several components. These include a catchment area on the Edwards Plateau where the unconfined aquifer receives direct recharge, an area of confining beds crossed by streams draining the Edwards Plateau, a major recharge area within the Balcones fault zone where streams lose flow directly into the unconfined Edwards aquifer, and the confined Edwards aquifer that consists of the freshwater and salinewater zones. Water entering the Edwards aquifer in the Balcones fault zone moves downdip in a generally southeasterly direction into the confined parts of the aquifer. In the confined aquifer, flow is toward the east and northeast under low hydraulic gradients through fractured, highly transmissive limestone and ultimately discharges at large springs and wells. All of the base flow and some of the storm runoff of streams crossing the recharge area infiltrates to the unconfined aquifer. On the basis of streamflow losses, the average annual recharge for 1934-88 was 635,500 acre-feet. Freshwater discharges from the Edwards aquifer primarily from wells, springs, and seeps. Beginning in 1968, annual discharge from the aquifer has consistently exceeded average annual recharge largely because of a doubling of well pumpage. However, total springflow also increased because of greater-than-average recharge during most years since the late 1960's. The total volume of circulating freshwater in the Edwards aquifer is about 45 million acrefeet. Long-term hydrographs at San Antonio indicate no net decline in ground-water levels during 1911-87; thus, there was no net loss of water from storage in the freshwater zone of the Edwards aquifer during that long-term period, assuming the San Antonio hydrograph represents the entire aquifer. However, short-term changes in water levels result largely from the variability of precipitation as indicated by severe declines during the drought of the late 1940's to middle 1950's and by rises to record highs during the abnormally wet years in the 1970's and 1980's. The principal components of the groundwater budget (recharge, springflow, and pumpage) have varied greatly over 55 years (1934-88) of pertinent hydrologic records. Annual recharge varied from about 44,000 to 2,000,000 acre-feet. Annual springflow varied from about 70,000 acrefeet to about 580,000 acre-feet. Pumpage increased from about 100,000 acre-feet annually in the early 1930's to more than 500,000 acre-feet annually during some years in the 1980's. However, the average annual recharge of 635,500 acrefeet is about equal to the sum of the average annual springflow (359,500 acre-feet) and average annual pumpage (273,000 acre-feet), indicating no longterm decrease in ground-water storage because of springflow and pumpage.

Texas↗

Ground-water data in the Corvallis-Albany area, central Willamette Valley, Oregon

THE CORVALLIS-ALBANY AREA IS PART OF THE ALLUVIAL PLAIN THAT LIES BETWEEN THE CASCADE AND COAST RANGES IN THE CENTRAL WILLAMETTE VALLEY IN NORTHWESTERN OREGON. THE ALLUVIAL DEPOSITS (SAND AND GRAVEL) OF THE VALLEY PLAIN CONTAIN THE MOST PRODUCTIVE AQUIFERS IN THE AREA AND ARE CONSIDERED TO BE THE ONLY UNITS FEASIBLE FOR LARGE-SCALE DEVELOPMENT OF GROUNDWATER SUPPLIES. DURING 1971 THE SEASONAL DECLINE OF WATER LEVELS FROM WINTER TO LATE SUMMER AVERAGED ABOUT 10 FEET FOR THE ALLUVIAL DEPOSITS. THE SEASONAL CHANGE OF STORAGE WAS ESTIMATED TO BE ABOUT 130,000 ACRE-FEET. OF THIS VOLUME, ABOUT 14,000 ACRE-FEET WAS PUMPED FROM WELLS; THE REST WAS DISCHARGED THROUGH SEEPS AND SPRINGS BY EVAPOTRANSPIRATION. THE DIFFERENCE BETWEEN PUMPAGE AND NATURAL DISCHARGE INDICATES THAT A GREAT QUANTITY OF ADDITIONAL WATER IS AVAILABLE FOR DEVELOPMENT. THE STORAGE CAPACITY OF THE ALLUVIAL AQUIFERS IS ESTIMATED TO BE ABOUT 750,000 ACRE-FEET BETWEEN DEPTHS OF 10 AND 100 FEET. WATER FROM THE ALLUVIAL DEPOSITS IS CHEMICALLY SUITABLE FOR ALL USES, AS IS MOST OF THE WATER FROM PERCHED-WATER BODIES IN THE OLDER SEDIMENTARY AND VOLCANIC ROCKS.

Oregon↗

Brief comparison of some technological and environmental aspects of large-scale surface and underground mining of oil shale, Piceance Creek Basin, Colorado

Comparison of several aspects of surface and underground methods of mining for large-scale oil shale extraction in the Piceance Creek Basin suggests that surface mining techniques may have several advantages over underground methods. For a production level of one million barrels of shale oil per day, potential advantages include those related to economics, environmental effects, and the overall national interest. One million barrels of shale oil per day could be produced from 2-3 large surface mines compared to perhaps 10-20 large underground mines. Fewer surface mines would result in: (1) fewer roads and utility corridors, (2) less acres disturbed per barrel of oil pro duced, (3) reduced detrimental effects on ground water and surface water, (4) less wildlife distur bance, (5) a safer overall operation, (6) a greater opportunity to achieve stable long-term land and water reclamation, (7) potential economic advantages related to scale and materials handling, and (8) a three- to five-fold increase in resource recovery. Advantages to underground (including modified in situ [MIS]) mines include: (1) more flexibility of mine siting, (2) mining and handling a minimum of waste rock, and (3) simplified ore grade control for processing.

Colorado↗

Apollo 11 and 12 mare basalts and gabbros: Classification, compositional variations, and possible petrogenetic relations

On the basis of composition, it is possible to distinguish three major groups of Apollo 12 basaltic rocks: olivine-pigeonite basalts and gabbros, ilmenite-bearing basalts and gabbros, and feldspathic basalts. Two major groups of Apollo 11 basalts are also distinguishable: ophitic ilmenite basalts and intersertal ilmenite basalts. Compositional variations between samples within groups are generally dominated by MgO variations, whereas differences between groups are primarily inverse variations of TiO 2 and SiO 2 or Al 2 O 3 and FeO. Results of fractionation calculations indicate that the MgO variation trends are explained principally by low-pressure fractionation of early-crystallized olivine ± pigeonite ± chrome spinel. The Al 2 O 3 versus FeO trend in the basalts might possibly be explained by near-surface fractionation, but the TiO 2 versus SiO 2 trend is not explainable in this way. Investigations of the latter trend in terms of possible processes of high-pressure fractional melting or fractional crystallization indicate that the compositional variations cannot be the products of simple variations in depth or degree of fractionation. Our data are consistent with the view that the mafic magmas formed by partial melting in the lunar interior, and that near-surface fractionation, with the exception of removal or addition of olivine, has not been extensive.

GSA Bulletin↗

Evaluation of major dike-impounded ground-water reservoirs, Island of Oahu, with a section on flow hydraulics in dike tunnels in Hawaii

Ground-water reservoirs impounded by volcanic dikes receive a substantial part of the total recharge to ground water on the island of Oahu because they generally underlie the rainiest areas. They accumulate the infiltration from rainfall, store it temporarily, and steadily leak it to abutting basal reservoirs or to streams cutting into them. The dike reservoirs have high hydraulic heads and are mostly isolated from saline water. The most important and productive of the dike-impounded reservoirs occur in an area of about 135 square miles in the main fissure zone of the Koolau volcano where the top of the dike-impounded water reaches an altitude of at least 1,000 feet. Water is impounded and stored both above and below sea level. The water stored above sea level in the area of about 135 square miles has been roughly estimated at 560 billion gallons by using a mean water level of 400 feet and a mean specific yield of 0.05. In comparison, the water stored above sea level in reservoirs with a mean water level of 300 feet and mean specific yield of 0.03 underlying a dike-intruded area of about 53 square miles in the Waianae Range has been roughly estimated at 100 billion gallons. Storage below sea level is indeterminable, owing to uncertainties in the ability of the rock to store water resulting from increasing dike density and decreasing porosity. Total leakage from storage in the WaLanae Range has not been estimated because underflow is difficult to determine. Much of the surface leakage, about 4 Mgal/d in the upper parts of Waianae, Makaha, and Lualualei Valleys, has been diverted by tunnels. Hence, supplies available, other than surface leakage, cannot be estimated from the discharge end of the hydrologic cycle. Infiltration in the Waianae Range to dike-intruded reservoirs in the upper part of the valleys on the west (leeward) side has been estimated at about 20 Mgal/d, and on the east (windward) side, at about 10 Mgal/d. The available supply has been estimated at about 15 Mgal/d from the infiltration on the leeward side, of which about 4 Mgal/d is now being developed. No estimate has been made for the available supply on the windward side. Dike-intruded reservoirs at shallow depths west (lee side) of the crest are in upper Makaha, Waianae, and Lualualei Valleys. They are at moderate depths in upper Haleanu and in lower Kaukonahua Gulches on the east (windward) side. Flow hydraulics in dike tunnels is also discussed.

Hawaii↗