USGS Science⌕ Search

SEARCH · USGS Science

Results for “Input”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71Linked to original sources
USGS1979

One-dimensional steady-state stream water-quality model

A computer program, based on a one-dimensional mathematical model which predicts the stream water-quality response characteristics from waste source inputs, is described and documented. Variables predicted include dissolved oxygen, biochemical oxygen demand, nitrogen forms, total and fecal-coliform bacteria, orthophosphate-phosphorus, and various conservative substances. The model is based primarily on the well known Streeter-Phelps oxygen-sag equation. Special options of the program include the capability of handling nonpoint source waste inputs and anoxic conditions. The model formulation is based on a steady-state assumption which requires constant flow rate of waste and stream discharges and associated parameters. To achieve a problem solution, each reach of a stream system is broken into a given number of subreaches, generally defined by locations of waste or tributary inflow points. All waste constituents are assumed to be completely mixed within any cross section.

Water-Resources Investigations Report↗
USGS1982

Digital model of the Bates Creek alluvial aquifer near Casper, Wyoming

A digital model was used to simulate ground-water flow within the Bates Creek alluvial aquifer, southwest of Casper, Wyoming. Hydrologic data collected during 1977 and 1978 were used to develop the flow model under steady-state and transient conditions. Three scenarios for operating the stream-aquifer system were evaluated with the digital model. The scenarios represent no ground-water pumping, pumping by all existing wells , and pumping by all existing and proposed wells. The model simulations used average values of stream discharge, ground-water pumpage and water use as input parameters. A decrease in the quantitity of ground-water discharge to Bates Creek is predicted to occur through 1988 as a result of pumping. The magnitude and timing of the predicted decrease in ground-water discharge may differ from actual ground-water discharge if hydrologic conditions through 1988 vary significantly from the averaged input values used in the simulations. (USGS)

Water-Resources Investigations Report↗
USGS1983

Simulated effects of anticipated coal mining on dissolved solids in selected tributaries of the Yampa River, northwestern Colorado

Identifying cumulative effects of coal mining on dissolved solids downstream from multipe coal-mining operations is particularly important in western basins. The problem of identifying cumulative effects is evident in the Trout Creek drainage, a tributary to the Yampa River in northwestern Colorado, where a number of mines are active and mine expansions are planned. As an evaluation tool, a model was developed and calibrated for the Trout Creek drainage and a reach of the Yampa River main stem. This model uses a series of nodes on the stream network to sum water quantity and quality through the network. The model operates on a monthly basis and uses data from water years 1976 to 1981. Output is mean monthly discharge, dissolved-solids concentration, and dissolved-solids load. Observed data are needed to initiate the model and for model calibration. Some data were extrapolated from records of nearby streamflow-gaging stations. Some nodes within the stream network were for inputs from anticipated mining and were inactive during calibrations. After calibration, these nodes were used to input water discharge at a given dissolved-solids concentration to reflect various future mine configurations. (USGS)

Water-Resources Investigations Report↗
USGS1983

A two-dimensional graphing program for the Tektronix 4050-series graphics computers

A refined, two-dimensional graph-plotting program was developed for use on Tektronix 4050-series graphics computers. Important features of this program include: any combination of logarithmic and linear axes, optional automatic scaling and numbering of the axes, multiple-curve plots, character or drawn symbol-point plotting, optional cartridge-tape data input and plot-format storage, optional spline fitting for smooth curves, and built-in data-editing options. The program is run while the Tektronix is not connected to any large auxiliary computer, although data from files on an auxiliary computer easily can be transferred to data-cartridge for later plotting. The user is led through the plot-construction process by a series of questions and requests for data input. Five example plots are presented to illustrate program capability and the sequence of program operation. (USGS)

Water-Resources Investigations Report↗
USGS1984

Sediment concentrations and loads in the Loxahatchee River estuary, Florida, 1980-82

This study was conducted to estimate the magnitude of sediment loads and the general spatial and temporal patterns of sediment transport in the Loxahatchee River estuary, Florida. Mean concentrations of suspended sediment generally were higher in the Jupiter Inlet area than in the remainder of the embayment area. Concentrations of suspended sediment varied with season and weather conditions. Concentrations in selected tributaries following Tropical Storm Dennis in August 1981 immediately increased as much as 16 times over concentrations before the storm. Suspended-sediment loads from the tributaries were also highly seasonal and storm related. During a 61-day period of above-average rainfall that included Tropical Storm Dennis, 5 major tributaries discharged 926 tons (short) of suspended sediment to the estuary, accounting for 74 percent of the input for the 1981 water year and 49 percent of the input for the 20-month study period. Suspended-sediment loads at Jupiter Inlet and at the mouth of the estuary embayment on both incoming and outgoing tides far exceeded tributary loads, but the direction of long-term, net tidal transport was not determined. (USGS)

Water-Resources Investigations Report↗
USGS1985

Documentation of a Regional Aquifer Simulation Model, RAQSIM, and a description of support programs applied in the Twin Platte-Middle Republican Study Area, Nebraska

RAQSIM, a generalized flow model of a groundwater system using finite-element methods, is documented to explain how it works and to demonstrate that it gives valid results. Three support programs that are used to compute recharge and discharge data required as input to RAQSIM are described. RAQSIM was developed to solve transient, two-dimensional, regional groundwater flow problems with isotropic or anisotropic conductance. The model can also simulate radially-symmetric flow to a well and steady-state flow. The mathematical basis, program structure, data input and output procedures, organization of data sets, and program features and options of RAQSIM are discussed. An example , containing listings of data and results and illustrating RAQSIM 's capabilities, is discussed in detail. Two test problems also are discussed comparing RAQSIM 's results with analytical procedures. The first support program described, the PET Program, uses solar radiation and other climatic data in the Jensen-Haise method to compute potential evapotranspiration. The second support program, the Soil-Water Program, uses output from the PET Program, soil characteristics, and the ratio of potential to actual evapotranspiration for each crop to compute infiltration, storage, and removal of water from the soil zone. The third program, the Recharge-Discharge Program, uses output from the Soil-Water Program together with other data to compute recharge and discharge from the groundwater flow system. For each support program, a program listing and examples of the data and results for the Twin Platte-Middle Republican study are provided. In addition, a brief discussion on how each program operates and on procedures for running and modifying these programs are presented. (Author 's abstract)

Nebraska↗
USGS1987

An evaluation of the bedrock aquifer system in northeastern Wisconsin

Ground water is a major source of water in northeastern Wisconsin. The lower Fox River valley, located between Lake Winnebago and Green Bay in northeastern Wisconsin, is the second largest population center in Wisconsin. By 1957, ground-water withdrawals had lowered the potentiometric surface of the aquifer system as much as 440 feet below prepumping levels. With the exception of the city of Green Bay, which converted from ground water to surface water (Lake Michigan) for their municipal water supply in 1957, ground-water withdrawals have continually increased. The report evaluates the bedrock aquifer system in northeastern Wisconsin and describes how the flow regimes in the system have been altered due to ground-water withdrawals. A three-dimensional finite-difference groundwater flow model was used to aid in evaluation of the regional flow system. In order to simplify the study of the aquifer system, the geologic units were grouped into eight geohydrologic units consisting of four aquifers and four confining beds. The aquifers are the more permeable sand and gravel layers in the surficial deposits (aquifer 4), Devonian dolomite-Silurian dolomite (aquifer 3), St. Peter Sandstone- Prairie du Chien Group-Jordan Sandstone Member of the Trempealeau Formation (aquifer 2), and the Galesville Sandstone-Eau Claire Sandstone-Mount Simon Sandstone (aquifer 1). The confining beds are the less permeable silts and clays in the surficial deposits (confining bed 4), Maquoketa Shale-Galena Dolomite-Decorah Shale-Platteville Formation (confining bed 3), St. Lawrence Member of the Trempealeau Formation-Franconia Sandstone (confining bed 2), and the Precambrian crystalline rock (confining bed 1). The following aquifer and confining-bed characteristics were determined to represent the aquifer system of northeastern Wisconsin and were used in the development of the model. Aquifer 4 acts as an upper boundary of the bedrock aquifer system. The hydraulic conductivity of aquifer 3 was 7.9 feet per day and the storage coefficient was estimated to be 0.01. Transmissivity input values to the model for aquifer 2 are based on hydraulic conductivities ranging from 3 to 8 feet per day. The storage coefficient for aquifer 2 was 0.0002. The transmissivity input values to the model for aquifer 1 are based on hydraulic conductivities ranging from 2.5 to 8 feet per day and the storage coefficient was 0.0002. Confining bed 4 acts as an upper confining unit for the underlying bedrock aquifers. A vertical hydraulic conductivity of 0.007 foot per day was assigned to represent confining bed 4. The vertical hydraulic conductivity of confining bed 3 was assigned values of 0.0001 to 0.000004 foot per day. A value of 0.00001 foot per day was used as the vertical hydraulic conductivity for confining bed 2. Confining bed 1 is a lower boundary of the system and was not modeled. Model simulations indicate that, by 1914, ground-water withdrawals from the aquifer system had already impacted the study area. Pumping in the Green Bay metropolitan area had lowered the potentiometric heads in aquifer 1 by 69 feet and in aquifer 2 by 55 feet. Model simulations indicate that, by 1981, ground-water withdrawals have caused a cone of depression centered in the city of De Pere area. The influence of the cone affects almost the entire study area and has significantly altered the horizontal and vertical flow regimes in the aquifer system. In 1981, computed drawdowns below the prepumping potentiometric surface of aquifer 1 range from 0 feet on the western side of the study area to 330 feet in the center of the cone of depression. In aquifer 2, the computed drawdown ranges from 0 feet on the western side of the study area to 253 feet in the center of the cone.

Wisconsin↗
USGS1985

A two-constituent solute-transport model for ground water having variable density

A numerical model has been developed to simulate solute transport and dispersion of either one or two constituents in groundwater where there is two-dimensional, density-dependent flow. The model is a modified version of the one documented by Konikow and Bredehoeft (1978), which uses finite-difference methods and the method of characteristics to solve the flow and transport equations. The model was tested on an idealized seawater intrusion problem for which an analytical solution has been developed. The results were nearly identical to those of other numerical models tested on the same problem. A description of the formats for the input data, a sample of input and output for a two-constituent example problem, and a listing of the Fortran program are presented. (Author 's abstract)

Water-Resources Investigations Report↗
USGS1985

A computer program for analyzing channel geometry

The Channel Geometry Analysis Program (CGAP) provides the capability to process, analyze, and format cross-sectional data for input to flow/transport simulation models or other computational programs. CGAP allows for a variety of cross-sectional data input formats through use of variable format specification. The program accepts data from various computer media and provides for modification of machine-stored parameter values. CGAP has been devised to provide a rapid and efficient means of computing and analyzing the physical properties of an open-channel reach defined by a sequence of cross sections. CGAP 's 16 options provide a wide range of methods by which to analyze and depict a channel reach and its individual cross-sectional properties. The primary function of the program is to compute the area, width, wetted perimeter, and hydraulic radius of cross sections at successive increments of water surface elevation (stage) from data that consist of coordinate pairs of cross-channel distances and land surface or channel bottom elevations. Longitudinal rates-of-change of cross-sectional properties are also computed, as are the mean properties of a channel reach. Output products include tabular lists of cross-sectional area, channel width, wetted perimeter, hydraulic radius, average depth, and cross-sectional symmetry computed as functions of stage; plots of cross sections; plots of cross-sectional area and (or) channel width as functions of stage; tabular lists of cross-sectional area and channel width computed as functions of stage for subdivisions of a cross section; plots of cross sections in isometric projection; and plots of cross-sectional area at a fixed stage as a function of longitudinal distance along an open-channel reach. A Command Procedure Language program and Job Control Language procedure exist to facilitate program execution on the U.S. Geological Survey Prime and Amdahl computer systems respectively. (Lantz-PTT)

Water-Resources Investigations Report↗
USGS1986

Computer programs for computing particle-size statistics of fluvial sediments

Two versions of computer programs for inputing data and computing particle-size statistics of fluvial sediments are presented. The FORTRAN 77 language versions are for use on the Prime computer, and the BASIC language versions are for use on microcomputers. The size-statistics program compute Inman, Trask , and Folk statistical parameters from phi values and sizes determined for 10 specified percent-finer values from inputed size and percent-finer data. The program also determines the percentage gravel, sand, silt, and clay, and the Meyer-Peter effective diameter. Documentation and listings for both versions of the programs are included. (Author 's abstract)

Water-Resources Investigations Report↗
USGS1987

Streamflow and water quality of the Grand Calumet River, Lake County, Indiana, and Cook County, Illinois, October 1984

A diel (24-hour) water-quality survey was done to investigate the sources of dry-weather waste inputs attributable to other than permitted point-source effluent and to evaluate the waste-load assimilative capacity of the Grand Calumet River, Lake County, Indiana, and Cook County, Illinois, in October 1984. Flow in the Grand Calumet River consists almost entirely of municipal and industrial effluents which comprised more than 90% of the 500 cu ft/sec flow observed at the confluence of the East Branch Grand Calumet River and the Indiana Harbor Ship Canal during the study. At the time of the study, virtually all of the flow in the West Branch Grand Calumet River was municipal effluent. Diel variations in streamflow of as much as 300 cu ft/sec were observed in the East Branch near the ship canal. The diel variation diminished at the upstream sampling sites in the East Branch. In the West Branch, the diel variation in flow was quite drastic; complete reversals of flow were observed at sampling stations near the ship canal. Average dissolved-oxygen concentrations at stations in the East Branch ranged from 5.7 to 8.2 mg/L and at stations in the West Branch from 0.8 to 6.6 mg/L. Concentrations of dissolved solids, suspended solids, biochemical-oxygen demand, ammonia, nitrite, nitrate, and phosphorus were substantially higher in the West Branch than in the East Branch. In the East Branch, only the Indiana Stream Pollution Control Board water-quality standards for total phosphorus and phenol were exceeded. In the West Branch, water-quality standards for total ammonia, chloride, cyanide, dissolved solids, fluoride, total phosphorus, mercury, and phenol were exceeded and dissolved oxygen was less than the minimum allowable. Three areas of significant differences between cumulative effluent and instream chemical-mass discharges were identified in the East Branch and one in the West Branch. The presence of unidentified waste inputs in the East Branch were indicated by differences in the chemical-mass discharges at three sites. Elevated suspended solids, biochemical-oxygen demand, and ammonia chemical-mass discharges at Columbia Avenue indicated the presence of a source of what may have been untreated sewage to the West Branch during the survey. (Author 's abstract)

Illinois, Indiana↗
USGS1987

AQMAN; linear and quadratic programming matrix generator using two-dimensional ground-water flow simulation for aquifer management modeling

A FORTRAN-77 computer program code that helps solve a variety of aquifer management problems involving the control of groundwater hydraulics. It is intended for use with any standard mathematical programming package that uses Mathematical Programming System input format. The computer program creates the input files to be used by the optimization program. These files contain all the hydrologic information and management objectives needed to solve the management problem. Used in conjunction with a mathematical programming code, the computer program identifies the pumping or recharge strategy that achieves a user 's management objective while maintaining groundwater hydraulic conditions within desired limits. The objective may be linear or quadratic, and may involve the minimization of pumping and recharge rates or of variable pumping costs. The problem may contain constraints on groundwater heads, gradients, and velocities for a complex, transient hydrologic system. Linear superposition of solutions to the transient, two-dimensional groundwater flow equation is used by the computer program in conjunction with the response matrix optimization method. A unit stress is applied at each decision well and transient responses at all control locations are computed using a modified version of the U.S. Geological Survey two dimensional aquifer simulation model. The program also computes discounted cost coefficients for the objective function and accounts for transient aquifer conditions. (Author 's abstract)

Water-Resources Investigations Report↗
USGS1987

Documentation of a graphical display program for the saturated- unsaturated transport (SUTRA) finite-element simulation model

This report documents a graphical display program for the U. S. Geological Survey finite-element groundwater flow and solute transport model. Graphic features of the program, SUTRA-PLOT (SUTRA-PLOT = saturated/unsaturated transport), include: (1) plots of the finite-element mesh, (2) velocity vector plots, (3) contour plots of pressure, solute concentration, temperature, or saturation, and (4) a finite-element interpolator for gridding data prior to contouring. SUTRA-PLOT is written in FORTRAN 77 on a PRIME 750 computer system, and requires Version 9.0 or higher of the DISSPLA graphics library. The program requires two input files: the SUTRA input data list and the SUTRA simulation output listing. The program is menu driven and specifications for individual types of plots are entered and may be edited interactively. Installation instruction, a source code listing, and a description of the computer code are given. Six examples of plotting applications are used to demonstrate various features of the plotting program. (Author 's abstract)

Water-Resources Investigations Report↗
USGS1989

Hydrology of the Goat Lake watershed, Snohomish County, Washington, 1982-87

The Goat Lake watershed in Snohomish County, Washington, functions as an ' experimental watershed ' for long-term studies to determine the effects of acidic precipitation on water resources. Data have been collected there by the U.S. Geological Survey since 1982. The watershed is in a wilderness area of the Cascade Range and is downwind of an industrial and urban area that produces chemical compounds found in acidic precipitation. The lake is considered sensitive to acidic inputs from atmospheric deposition and streamflow. The mean annual discharge of the Goat Lake outflow is 35 cu ft/sec; precipitation on the watershed is calculated to be about 170 in/yr. The inflow to Goat Lake is sufficient to replace the entire contents of the lake basin on an average every 21.5 days, or 17 times/year. Water in Goat Lake, and that of the inlet and outlet, is of low ionic strength and of calcium-bicarbonate type. The lake, although considered oligotrophic, is sufficiently deep to stratify thermally, and summer dissolved-oxygen concentrations in the hypolimnion are depressed. Even though alkalinity and specific conductance at Goat Lake are in the range considered sensitive to acidic inputs , the pH of water in the lake has consistently ranged from 6.1 to 7.2, indicating that the lake is not acidified at this time. (USGS)

Water-Resources Investigations Report↗
USGS1989

A numerical solution for the diffusion equation in hydrogeologic systems

The documentation of a computer code for the numerical solution of the linear diffusion equation in one or two dimensions in Cartesian or cylindrical coordinates is presented. Applications of the program include molecular diffusion, heat conduction, and fluid flow in confined systems. The flow media may be anisotropic and heterogeneous. The model is formulated by replacing the continuous linear diffusion equation by discrete finite-difference approximations at each node in a block-centered grid. The resulting matrix equation is solved by the method of preconditioned conjugate gradients. The conjugate gradient method does not require the estimation of iteration parameters and is guaranteed convergent in the absence of rounding error. The matrixes are preconditioned to decrease the steps to convergence. The model allows the specification of any number of boundary conditions for any number of stress periods, and the output of a summary table for selected nodes showing flux and the concentration of the flux quantity for each time step. The model is written in a modular format for ease of modification. The model was verified by comparison of numerical and analytical solutions for cases of molecular diffusion, two-dimensional heat transfer, and axisymmetric radial saturated fluid flow. Application of the model to a hypothetical two-dimensional field situation of gas diffusion in the unsaturated zone is demonstrated. The input and output files are included as a check on program installation. The definition of variables, input requirements, flow chart, and program listing are included in the attachments. (USGS)

Water-Resources Investigations Report↗
USGS1990

A statistical processor for analyzing simulations made using the Modular Finite-Difference Ground-water Flow Model

Many hydrologic studies of ground-water systems are conducted using a digital computer model as an aid to understanding the flow system. One of the most commonly used ground-water modeling programs is the Modular Three-Dimensional Ground-water Flow Model (Modular Model) by McDonald and Harbaugh. This report presents a computer program to summarize the data input to and output from the Modular Model. The program is named the Modular Model Statistical Processor and is designed to be run following the Modular Model. The Modular Model Statistical Processor provides ground-water modelers with the capabilities to easily read data input to and output from the Modular Model, calculate descriptive statistics, generate histograms, perform logical tests using relational operators, calculate data arrays using arithmetic operators, and calculate flow vectors for use in a graphical-display program.

Water-Resources Investigations Report↗
USGS1994

Application of a Geographic Information System for regridding a ground-water flow model of the Columbia Plateau Regional Aquifer System, Walla Walla River basin, Oregon-Washington

Computerized Geographic Information Systems (GIS) have become viable and valuable tools for managing,analyzing, creating, and displaying data for three-dimensional finite-difference ground-water flow models. Three GIS applications demonstrated in this study are: (1) regridding of data arrays from an existing large-area, low resolution ground-water model to a smaller, high resolution grid; (2) use of GIS techniques for assembly of data-input arrays for a ground-water model; and (3) use of GIS for rapid display of data for verification, for checking of ground-water model output, and for the cre.ation of customized maps for use in reports. The Walla Walla River Basin was selected as the location for the demonstration because (1) data from a low resolution ground-water model (Columbia Plateau Regional Aquifer System Analysis [RASA]) were available and (2) concern for long-term use of water resources for irrigation in the basin. The principal advantage of regridding is that it may provide the ability to more precisely calibrate a model, assuming chat a more detailed coverage of data is available, and to evaluate the numerical errors associated with a particular grid design.Regridding gave about an 8-fold increase in grid-node density.Several FORTRAN programs were developed to load the regridded ground-water data into a finite-difference modular model as model-compatible input files for use in a steady-state model run.To facilitate the checking and validating of the GIS regridding process, maps and tabular reports were produced for each of eight ground-water parameters by model layer. Also, an automated subroutine that was developed to view the model-calculated water levels in cross-section will aid in the synthesis and interpretation of model results.

Water-Resources Investigations Report↗
USGS1990

Hydrology and land use in Grand Traverse County, Michigan

Glacial deposits are the sole source of ground-water supplies in Grand Traverse County. These deposits range in thickness from 100 to 900 feet and consist of till, outwash, and materials of lacustrine and eolian origin. In some areas, the deposits fill buried valleys that are 500 feet deep. Sedimentary rocks of Paleozoic age, which underlie the glacial deposits, are mostly shale and are not used for water supply. Of the glacial deposits, outwash and lacustrine sand are the most productive aquifers. Most domestic wells obtain water from sand and gravel at depths ranging from 50 to 150 feet and yield at least 20 gallons per minute. Irrigation, municipal, and industrial wells capable of yielding 250 gallons per minute or more are generally greater than 150 feet deep. At places in the county where moranial deposits contain large amounts of interbedded silt and clay, wells are generally deeper and yields are much lower. Areal variations in the chemical and physical characteristics of ground and surface water are related to land use and chemical inputs to the hydrologic system. Information on fertilizer application, septic-tank discharges, animal wastes, and precipitation indicate that 40 percent of nitrogen input is from precipitation, 6 percent from septic tanks, 14 percent from animal wastes, and 40 percent from fertilizers. Streams and lakes generally have a calcium bicarbonate-type water. The dissolved-solids concentration of streams ranged from 116 to 380 milligrams per liter, and that of lakes, from 47 to 170 milligrams per liter. Water of streams is hard to very hard; water of lakes ranges from soft to hard. The maximum total nitrogen concentration found in streams was 4.4 milligrams per liter. Water of lakes have low nitrogen concentrations; the median nitrate concentration is less than 0.01 milligrams per liter. Pesticides (Parathion and Simazine) were detected in low concentrations at six stream sites; 2,4-D was detected in low concentrations in water of two lakes. Relationships between land use and the yield of dissolved and suspended substances could not be established for most stream basins. Calcium and bicarbonate are the principal dissolved substances in ground water. Dissolved-solids concentrations ranged from 70 to 700 milligrams per liter; the countywide mean concentration is 230 milligrams per liter. The mean nitrate concentration is 1.3 milligrams per liter; about 1.6 percent of the county's ground water has nitrate concentrations that exceed the U.S. Environmental Protection Agency's maximum drinking water level of 10 milligrams per liter. An effect of fertilizer applications on ground-water quality is evident in some parts of the county.

Michigan↗