USGS Science⌕ Search

SEARCH · USGS Science

Results for “Hydrologic Unit”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71Linked to original sources
USGS2004

Regional paleohydrologic and paleoclimatic settings of wetland/lacustrine depositional systems in the Morrison Formation (Upper Jurassic), Western Interior, USA

During deposition of the Upper Jurassic Morrison Formation, water that originated as precipitation in uplands to the west of the Western Interior depositional basin infiltrated regional aquifers that underlay the basin. This regional groundwater system delivered water into the otherwise dry continental interior basin where it discharged to form two major wetland/lacustrine successions. A freshwater carbonate wetland/lacustrine succession formed in the distal reaches of the basin, where regional groundwater discharged into the Denver-Julesburg Basin, which was a smaller structural basin within the more extensive Western Interior depositional basin. An alkaline-saline wetland/lacustrine complex (Lake T'oo'dichi') formed farther upstream, where shallower aquifers discharged into the San Juan/Paradox Basin, which was another small structural basin in the Western Interior depositional basin. These were both wetlands in the sense that groundwater was the major source of water. Input from surface and meteoric water was limited. In both basins, lacustrine conditions developed during episodes of increased input of surface water. Inclusion of wetlands in our interpretation of what had previously been considered largely lacustrine systems has important implications for paleohydrology and paleoclimatology. The distal carbonate wetland/lacustrine deposits are well developed in the Morrison Formation of east-central Colorado, occupying a stratigraphic interval that is equivalent to the "lower" Morrison but extends into the "upper" Morrison Formation. Sedimentologic, paleontologic, and isotopic evidence indicate that regional groundwater discharge maintained shallow, hydrologically open, well oxygenated, perennial carbonate wetlands and lakes despite the semi-arid climate. Wetland deposits include charophyte-rich wackestone and green mudstone. Lacustrine episodes, in which surface water input was significant, were times of carbonate and siliciclastic deposition in scarce deltaic and shoreline deposits. Marginal lacustrine deposits include ooid and skeletal packstone-grainstone, siltstone, and sandstone. Distal lacustrine units are skeletal mudstone-wackestone, microbialites, and laminated (siliciclastic) mudstone. Differentiation between wetlands and distal lacustrine units is not always possible. Palustrine features, Magadi-type chert (MTC), and evaporites record episodes of increased aridity and exposure. Farther upstream, during deposition of the upper part of the Brushy Basin Member, the ancestral Uncompahgre Uplift imposed a barrier to shallow, eastward-flowing groundwater that discharged into the San Juan/Paradox Basin on the upstream side of the uplift. This created the closed hydrologic setting necessary for development of an alkaline-saline wetland/lacustrine complex ("Lake" T'oo'dichi'). Silicic volcanic ash, delivered by prevailing winds from calderas west and southwest of the basin, contributed to the pore-water evolution in the sediments. A distinctive lateral hydrogeochemical gradient, reflecting increasing salinity and alkalinity in the pore waters, altered the ash to a variety of authigenic minerals that define concentric zones within the basin. The basinward progression of diagenetic mineral zones is smectite???clinoptilolite???analcime ??potassium feldspar???albite. The groundwater-fed wetlands were shallow and frequently evaporated to dryness. Scarce laminated gray mudstone beds record distinct episodes of freshwater lacustrine deposition that resulted from intermittent streams that carried detritus well out into the basin. ?? 2004 Elsevier B.V. All rights reserved.

Sedimentary Geology↗
USGS2021

Assessment of peak flow scaling and Its effect on flood quantile estimation in the United Kingdom

Regional flood frequency analysis (RFFA) methods are essential tools to assess flood hazard and plan interventions for its mitigation. They are used to estimate flood quantiles when the at‐site record of streamflow data is not available or limited. One commonly used RFFA method is the index flood method (IFM), which assumes that peak floods satisfy the simple scaling hypothesis. In this work we present an integrated approach to assess the spatial scaling behavior of floods in the United Kingdom (UK) for 540 catchments, where the IFM is currently used operationally. This assessment employs product moments, probability weighted moments, and quantile analysis, and is applied to two different types of “hydrologically homogeneous” UK regions: geographical regions as defined in the Flood Studies Report (NERC, 1975) and pooling‐groups as defined in the updated Flood Estimation Handbook (FEH; Institute of Hydrology, 1999). To understand which variables play a significant role in the flood‐peak generating mechanism, the assessment approach considers scaling not only of drainage area alone but also of other hydro‐geomorphological variables. Results provided by the different methodologies consistently showed that only part (ranging from 30% to 70%) of the peak flow variability is explained by drainage area alone; this fraction increases (up to 80%–95%) when multiple regression is used. Supported by the peak flow spatial scaling assessment, we compared the proposed approach for peak flow quantile estimation with the current FEH method in ungauged catchments. The quantile regression method based on the pooling‐group outperforms the current FEH‐ungauged method, providing a 14% relative improvement in root mean square error over the entire country.

Water Resources Research↗
USGS2010

Dating of shallow groundwater: Comparison of the transient tracers 3H/3He, chlorofluorocarbons, and 85Kr

This paper describes a direct comparison of apparent ages derived from 3 H/ 3 He, chlorofluorocarbons (CCl 3 F and CCl 2 F 2 ), and 85 Kr measurements in shallow groundwater. Wells chosen for this study are completed in the unconfined surficial aquifers in late Cenozoic Atlantic Coastal Plain sediments of the Delmarva Peninsula, on the east coast of the United States. Most of the apparent tracer ages agree within 2 years of each other for recharge dates between 1965 and 1990. Discrepancies in apparent tracer ages usually can be explained by hydrological processes such as mixing in a discharge area. Recharge rate calculations based on apparent tracer age gradients at multilevel well locations agree with previous recharge estimates. High recharge rates on the Delmarva Peninsula result in nearly complete dissolved-gas confinement in the groundwater. The remarkable agreement between the different tracer ages indicates negligible mixing of waters of different ages, insignificant dispersion, minimal gas loss to the atmosphere, and insignificant sorption-desorption processes at this location.

Water Resources Research↗
USGS1978

The United States Geological Survey in Alaska: Accomplishments during 1977

United States Geological Survey projects in Alaska study a wide range of topics of economic and scientific interest. Work done in 1977 includes contributions to economic geology, regional geology, stratigraphy, engineering geology, hydrology, and marine geology. Many maps and reports covering various aspects of the geology and mineral and water resources of the State were published. In addition, the published 1:1,000,000-scale map of the State has been revised in two areas. A bibliography containing 263 reports on Alaska published in 1977 is included.

Alaska↗
USGS2007

Simulation of Regional Ground-Water Flow in the Suwannee River Basin, Northern Florida and Southern Georgia

The Suwannee River Basin covers a total of nearly 9,950 square miles in north-central Florida and southern Georgia. In Florida, the Suwannee River Basin accounts for 4,250 square miles of north-central Florida. Evaluating the impacts of increased development in the Suwannee River Basin requires a quantitative understanding of the boundary conditions, hydrogeologic framework and hydraulic properties of the Floridan aquifer system, and the dynamics of water exchanges between the Suwannee River and its tributaries and the Floridan aquifer system. Major rivers within the Suwannee River Basin are the Suwannee, Santa Fe, Alapaha, and Withlacoochee. Four rivers west of the Suwannee River are the Aucilla, the Econfina, the Fenholloway, and the Steinhatchee; all drain to the Gulf of Mexico. Perhaps the most notable aspect of the surface-water hydrology of the study area is that large areas east of the Suwannee River are devoid of channelized, surface drainage; consequently, most of the drainage occurs through the subsurface. The ground-water flow system underlying the study area plays a critical role in the overall hydrology of this region of Florida because of the dominance of subsurface drain-age, and because ground-water flow sustains the flow of the rivers and springs. Three principal hydrogeologic units are present in the study area: the surficial aquifer system, the intermediate aquifer system, and the Floridan aquifer system. The surficial aquifer system principally consists of unconsoli-dated to poorly indurated siliciclastic deposits. The intermediate aquifer system, which contains the intermediate confining unit, lies below the surficial aquifer system (where present), and generally consists of fine-grained, uncon-solidated deposits of quartz sand, silt, and clay with interbedded limestone of Miocene age. Regionally, the intermediate aquifer system and intermediate con-fining unit act as a confining unit that restricts the exchange of water between the over-lying surficial and underlying Upper Floridan aquifers. The Upper Floridan aquifer is present throughout the study area and is extremely permeable and typically capable of transmitting large volumes of water. This high permeability largely is due to the widening of fractures and formation of conduits within the aquifer through dissolu-tion of the limestone by infiltrating water. This process has also produced numerous karst features such as springs, sinking streams, and sinkholes. A model of the Upper Floridan aquifer was created to better understand the ground-water system and to provide resource managers a tool to evaluate ground-water and surface-water interactions in the Suwannee River Basin. The model was developed to simulate a single Upper Floridan aquifer layer. Recharge datasets were developed to represent a net flux of water to the top of the aquifer or the water table during a period when the system was assumed to be under steady-state conditions (September 1990). A potentiometric-surface map representing water levels during September 1990 was prepared for the Suwannee River Water Management District (SRWMD), and the heads from those wells were used for calibration of the model. Additionally, flows at gaging sites for the Suwannee, Alapaha, Withlacoochee, Santa Fe, Fenholloway, Aucilla, Ecofina, and Steinhatchee Rivers were used during the calibration process to compare to model computed flows. Flows at seven first-magnitude springs selected by the SRWMD also were used to calibrate the model. Calibration criterion for matching potentiometric heads was to attain an absolute residual mean error of 5 percent or less of the head gradient of the system which would be about 5 feet. An absolute residual mean error of 4.79 feet was attained for final calibration. Calibration criterion for matching streamflow was based on the quality of measurements made in the field. All measurements used were rated ?good,? so the desire was for simulated values to be wi

Florida, Georgia↗
USGS2002

Simulation of ground-water flow in the Intermediate and Floridan aquifer systems in Peninsular Florida

A numerical model of the intermediate and Floridan aquifer systems in peninsular Florida was used to (1) test and refine the conceptual understanding of the regional ground-water flow system; (2) develop a data base to support subregional ground-water flow modeling; and (3) evaluate effects of projected 2020 ground-water withdrawals on ground-water levels. The four-layer model was based on the computer code MODFLOW-96, developed by the U.S. Geological Survey. The top layer consists of specified-head cells simulating the surficial aquifer system as a source-sink layer. The second layer simulates the intermediate aquifer system in southwest Florida and the intermediate confining unit where it is present. The third and fourth layers simulate the Upper and Lower Floridan aquifers, respectively. Steady-state ground-water flow conditions were approximated for time-averaged hydrologic conditions from August 1993 through July 1994 (1993-94). This period was selected based on data from Upper Floridan a quifer wells equipped with continuous water-level recorders. The grid used for the ground-water flow model was uniform and composed of square 5,000-foot cells, with 210 columns and 300 rows.

Water-Resources Investigations Report↗
USGS2003

Case study for delineating a contributing area to a well in a fractured siliciclastic-bedrock aquifer near Lansdale, Pennsylvania

A supply well used by the North Penn Water Authority near Lansdale, Pa., was selected as a case study for delineating a contributing area in a fractured siliciclastic-bedrock aquifer. The study emphasized the importance of refining the understanding of factors that control ground-water movement to the well by conducting (1) geophysical logging and flow measurements, (2) ground-water level monitoring, (3) aquifer testing, and (4) geochemical sampling. This approach could be applicable for other wells in siliciclastic-bedrock terranes, especially those of Triassic age in southeastern Pennsylvania. The principal methods for refining the understanding of hydrology at supply well MG-1125 were aquifer testing, water-level measurements, and geophysical logging. Results of two constant-discharge aquifer tests helped estimate the transmissivity of water-producing units and evaluate the anisotropy caused by dipping beds. Results from slug tests provided estimates of transmissivity that were used to evaluate the results from the constant-discharge aquifer tests. Slug tests also showed the wide distribution of transmissivity, indicating that ground-water velocities must vary considerably in the well field. Water-level monitoring in observation wells allowed maps of the potentiometric surface near the well field to be drawn. The measurements also showed that the hydraulic gradient can change abruptly in response to pumping from nearby supply wells. Water levels measured at a broader regional scale in an earlier study also provided a useful view of the potentiometric surface for purposes of delineating the contributing area. Geophysical logging and measurements of flow within wells showed that about 60 percent of water from supply well MG-1125 probably is contributed from relatively shallow water-producing fractures from 60 to 125 feet below land surface, but measurable amounts of water are contributed by fractures to a depth of 311 feet below land surface. Chemical samples supported the evidence that shallow fractures probably contribute significant amounts of water to well MG-1125. The large contribution of water from shallow fractures indicates that the area providing part of the recharge to the well is not far removed from the wellhead. Preliminary delineations of the contributing area and the 100-day time-of travel area were computed from a water budget and time-of-travel equation. These delineations provided insight into the size (but not the shape) of the contributing areas. Three other approaches were used and results compared: (1) uniform-flow equation, (2) hydrogeologic mapping, and (3) numerical modeling. The uniform-flow equation predicted a contributing area that seemed unrealistic—extending far across the ground-water divide into an adjacent watershed. Hydrogeologic mapping, if used with the potentiometric surface and constrained by the water budget, produced contributing area that was similar to that from numerical modeling. Numerical modeling allowed the incorporation of anisotropy caused by dipping water-producing units, differing transmissivity values of geologic units, and ground-water withdrawals from nearby supply wells. The numerical modeling showed that groundwater withdrawals from nearby supply wells affected the contributing area to supply well MG-1125 but had less effect on the 100-day time-of-travel area.

Water-Resources Investigations Report↗
USGS1986

Geohydrology of the aquifers that may be affected by the surface mining of coal in the Fruitland Formation in the San Juan Basin, northwestern New Mexico

A monitoring network of 50 wells was installed from 1975 to 1979 in the surface-mineable coal area. The purpose of the network was to collect hydrologic data and to establish a data base. The hydrologic data consist of water level measurements, water chemistry, and selected aquifer characteristics. The four aquifers considered in this study are: (1) The Pictured Cliffs Sandstone; (2) coal seams and interbedded lithologic units of the Fruitland Formation; (3) overburden of the Kirtland Shale and Fruitland Formation; and (4) the alluvium along the Chaco River and its eastern and northeastern tributaries. Five sites were selected for study. Four of these sites, Western Coal Company 's lease near Fruitland, Bisti West, Kimbeto, and Ojo Encino, have surface-mineable coal. The Chaco River alluvium was selected because it is downstream from anticipated mining activity. The specific conductances of the representative water samples from selected wells in the 4 aquifers in the 5 study areas ranged from 800 to 23,000 microsiemens/cm at 25 C. The dominant cation in all samples was sodium. The water is brackish in the Pictured Cliffs Sandstone and in the coal seams and interbedded lithologic units of the Fruitland Formation. It is fresh to saline in the overburden of the Fruitland Shale and Fruitland Formation, and fresh to brackish in the Chaco River alluvium. (Author 's abstract)

Water-Resources Investigations Report↗
USGS1996

Hydrogeologic investigation and simulation of ground-water flow in the Upper Floridan Aquifer of north-central Florida and southwestern Georgia and delineation of contributing areas for selected city of Tallahassee, Florida, water-supply wells

A 4-year investigation of the Upper Floridan aquifer and ground-water flow system in Leon County, Florida, and surrounding counties of north-central Florida and southwestern Georgia began in 1990. The purpose of the investigation was to describe the ground-water flow system and to delineate the contributing areas to selected City of Tallahassee, Florida, water-supply wells. The investigation was prompted by the detection of low levels of tetrachloroethylene in ground-water samples collected from several of the city's water-supply wells. Hydrologic data and previous studies indicate that; ground-water flow within the Upper Floridan aquifer can be considered steady-state; the Upper Floridan aquifer is a single water-bearing unit; recharge is from precipitation; and that discharge occurs as spring flow, leakage to rivers, leakage to the Gulf of Mexico, and pumpage. Measured transmissivities of the aquifer ranged from 1,300 ft 2 /d (feet squared per day) to 1,300,000 ft2/d. Steady-state ground-water flow in the Upper Floridan aquifer was simulated using a three-dimensional ground- water flow model. Transmissivities ranging from less than 5,000 ft2/d to greater than 11,000,000 ft 2 /d were required to calibrate to observed conditions. Recharge rates used in the model ranged from 18.0 inches per year in areas where the aquifer was unconfined to less than 2 inches per year in broad areas where the aquifer was confined. Contributing areas to five Tallahassee water-supply wells were simulated by particle- tracking techniques. Particles were seeded in model cells containing pumping wells then tracked backwards in time toward recharge areas. The contributing area for each well was simulated twice, once assuming a porosity of 25 percent and once assuming a porosity of 5 percent. A porosity of 25 percent is considered a reasonable average value for the Upper Floridan aquifer; the 5 percent porosity simulated the movement of ground-water through only solution-enhanced bedding plains and fractures. The contributing areas were generally elliptical in shape, reflecting the influence of the sloping potentiometric surface. The contributing areas delineated for a 5 percent porosity were always much larger than those determined using a 25 percent porosity. The lowest average ground-water velocity computed within a contributing area, using a 25 percent porosity, was 1.0 ft/d (foot per day) and the highest velocity was 1.6 ft/d. The lowest average ground-water velocity, determined using a 5 percent porosity, was 2.4 ft/d and the highest was 7.4 ft/d. The contributing areas for each of the five wells was also determined analytically and compared to the model-derived areas. The upgradient width of the simulated contributing areas were larger than the upgradient width of the analytically determined contributing areas for four of the five wells. The model could more accurately delineate contributing areas because of the ability to simulate wells as partially penetrating and by incorporating complex, three-dimensional aquifer characteristics, which the analytical method could not.

Florida, Georgia↗
USGS2011

A proxy for high-resolution regional reanalysis for the Southeast United States: assessment of precipitation variability in dynamically downscaled reanalyses

We present an analysis of the seasonal, subseasonal, and diurnal variability of rainfall from COAPS Land- Atmosphere Regional Reanalysis for the Southeast at 10-km resolution (CLARReS10). Most of our assessment focuses on the representation of summertime subseasonal and diurnal variability.Summer precipitation in the Southeast United States is a particularly challenging modeling problem because of the variety of regional-scale phenomena, such as sea breeze, thunderstorms and squall lines, which are not adequately resolved in coarse atmospheric reanalyses but contribute significantly to the hydrological budget over the region. We find that the dynamically downscaled reanalyses are in good agreement with station and gridded observations in terms of both the relative seasonal distribution and the diurnal structure of precipitation, although total precipitation amounts tend to be systematically overestimated. The diurnal cycle of summer precipitation in the downscaled reanalyses is in very good agreement with station observations and a clear improvement both over their "parent" reanalyses and over newer-generation reanalyses. The seasonal cycle of precipitation is particularly well simulated in the Florida; this we attribute to the ability of the regional model to provide a more accurate representation of the spatial and temporal structure of finer-scale phenomena such as fronts and sea breezes. Over the northern portion of the domain summer precipitation in the downscaled reanalyses remains, as in the "parent" reanalyses, overestimated. Given the degree of success that dynamical downscaling of reanalyses demonstrates in the simulation of the characteristics of regional precipitation, its favorable comparison to conventional newer-generation reanalyses and its cost-effectiveness, we conclude that for the Southeast United states such downscaling is a viable proxy for high-resolution conventional reanalysis.

Climate Dynamics↗
USGS2017

Estimating the high-arsenic domestic-well population in the conterminous United States

Arsenic concentrations from 20 450 domestic wells in the U.S. were used to develop a logistic regression model of the probability of having arsenic >10 μg/L (“high arsenic”), which is presented at the county, state, and national scales. Variables representing geologic sources, geochemical, hydrologic, and physical features were among the significant predictors of high arsenic. For U.S. Census blocks, the mean probability of arsenic >10 μg/L was multiplied by the population using domestic wells to estimate the potential high-arsenic domestic-well population. Approximately 44.1 M people in the U.S. use water from domestic wells. The population in the conterminous U.S. using water from domestic wells with predicted arsenic concentration >10 μg/L is 2.1 M people (95% CI is 1.5 to 2.9 M). Although areas of the U.S. were underrepresented with arsenic data, predictive variables available in national data sets were used to estimate high arsenic in unsampled areas. Additionally, by predicting to all of the conterminous U.S., we identify areas of high and low potential exposure in areas of limited arsenic data. These areas may be viewed as potential areas to investigate further or to compare to more detailed local information. Linking predictive modeling to private well use information nationally, despite the uncertainty, is beneficial for broad screening of the population at risk from elevated arsenic in drinking water from private wells.

Environmental Science & Technology↗
USGS1993

Reconnaissance of the hydrology of sandstone and limestone aquifers along the northwest flank of the Little Rocky Mountains, Fort Belknap Indian Reservation, north-central Montana

The geohydrology of aquifers was studied the south- western part of the Fort Belknap Indian Reservation in north-central Montana. The geologic units of interest are the Lodgepole Limestone, principally composed of thin-bedded limestone; the Mission Canyon Limestone, a massive limestone containing numerous solution cavities; the lower part of the Kootenai Formation, composed of sandstone; a sands- stone unit at the base of the Colorado Group; and the Virgelle Sandstone Member at the base of the Eagle Sandstone. These units were formed during Early Mississippian through Late Cretaceous time and have been subjected to uplift, folding, and the intrusion of the igneous core of Little Rocky Mountains. Dips of these units range from nearly vertical to about 10 degrees. Thirty-one test holes were drilled and 25 of the holes were completed as monitoring wells. Water-level fluctuations in most aquifers followed a seasonal pattern with the lowest levels occurring in the fall and winter and highest levels in the spring and summer. Seasonal fluctuations ranged from about 0.6 to 21 feet. Specific capacity of wells tested ranged from 0.02 gallon per minute per foot for a well completed in the Eagle Sandstone to 4.6 gallons per minute per foot for a well completed in the Mission Canyon Limestone. Eight aquifer tests indicated transmissivity values of 15 to 1,000 feet squared per day. Dissolved-solids concentration in water collected from 22 wells ranged from 263 to 1,930 milligrams per liter. The least mineralized water was obtained from the Mission Canyon Limestone and the most mineralized from the Eagle Sandstone.

Water-Resources Investigations Report↗
USGS2026

Emergent headwater types for watershed monitoring, research, and planning

Headwaters—that is headwater streams and the watersheds they drain—strongly influence water quality, ecosystem services, and hydrologic connectivity, yet remain poorly mapped, monitored, and understood at large spatial scales. Using available spatial data to classify headwater “types” could therefore enhance the utility of sparse monitoring data to advance research and watershed planning—and help update literature-based perceptual models of headwaters as steep, forested, and minimally disturbed watersheds. Here, we analyze headwaters across the contiguous United States to quantify how their attributes (climate, topography, land cover, soils) vary regionally and differ from their downstream watersheds. Our analysis (a) identified seven dominant headwater types with distinct combinations of biophysical and climatic attributes and (b) revealed systematic contrasts with downstream watersheds, with strongest differences in attributes representing potential flowpath depth. Our findings offer a transferable framework for classifying, modeling, and managing these critical yet understudied components of the hydrologic network.

conterminous United States↗
USGS2002

Geohydrology of Southeastern Pennsylvania

Rapid population growth in southeastern Pennsylvania has increased the demand for ground water. In an effort to address the increased ground-water needs, a ground-water investigation in a 5,200-square-mile area of southeastern Pennsylvania was initiated. Information on the geohydrologic system of the area and the water-bearing capabilities of 51 geohydrologic units in six physiographic provinces or sections (Coastal Plain, Piedmont Upland, Piedmont Lowland, Gettysburg-Newark Lowland, South Mountain, and Reading Prong) has been summarized. Also included are statistical summaries by geohydrologic unit for well construction and discharge data (according to water use), as well as inorganic and radiochemical ground-water-quality data. Characteristics of the ground-water-flow system in the study area, as well as aquifer hydrologic properties, are related to geology, but can be modified by human development. Ground-water flow in the Coastal Plain Physiographic Province, is through intergranular or primary openings under either unconfined or confined aquifer conditions. Historically, ground-water flowed toward the Delaware and Schuylkill Rivers, but the original flow paths and water quality have been altered significantly by urbanization. In igneous and metamorphic rocks (Piedmont Upland, South Mountain, and Reading Prong), ground-water flows through a network of interconnected secondary openings (fractures, joints, cleavage planes). Ground water in the carbonate rocks (Piedmont Lowland) also flows through a network of secondary openings, but these openings have been enlarged by solution. In the Triassic sedimentary rocks (Gettysburg-Newark Lowland), thin tabular aquifers are separated by much thicker, strata-bound aquitards. The fractured Triassic bedrock forms a very complex, anisotropic, and heterogeneous aquifer with horizontal permeability much greater than vertical permeability. In general, ground-water flow in southeastern Pennsylvania takes place within local flow systems that discharge within days or weeks to adjacent stream valleys or surface-water bodies. Intermediate (South Mountain) and regional (Gettysburg-Newark Lowland) scale systems, however, in which residence times have been measured in months or years discharge to major streams or rivers that are located in different physiographic provinces or sections or tens of miles distant. Well depths, casing lengths, reported yields, and specific capacities can vary significantly by geohydrologic unit, use of well, and topographic setting. Wells drilled in the Weverton and Loudon Formations, undivided, and the Montalto Quartzite Member (South Mountain) have median well and casing lengths of 374 and 130 feet, respectively, significantly greater than in almost every other geohydrologic unit in the study area. Wells drilled in the Peach Bottom Slate and Cardiff Conglomerate, undivided (Piedmont Upland) are typically shallow, with a median well depth of 90 feet. Wells in the Marburg Schist (Piedmont Upland) have the lowest median casing length—5.5 feet. Wells in the Stonehenge Formation (Piedmont Lowland), the most productive unit in the study area, have a median reported yield of 200 gallons per minute and a median specific capacity of 27 gallons per minute per foot. The Cocalico Formation (Piedmont Lowland) is the least productive unit with a median reported well yield of 2.5 gallons per minute and a median specific capacity of 0.01 gallons per minute per foot. In general, high-demand wells are significantly deeper, use significantly more casing, and have significantly greater yields than domestic wells drilled in the same unit. Commonly, wells drilled in valleys will have greater reported yields and specific capacities than wells drilled in the same unit on slopes or hilltops. Except where adversely affected by human activities, the quality of ground water in southeastern Pennsylvania is suitable for most purposes. Yet several water-quality criteria are exceeded in many wells throughout the area. Water from 51 percent of 2,075 wells sampled had a pH higher or lower than the range specified in the U.S. Environmental Protection Agency (USEPA) secondary maximum contaminant level (SMCL). Of water samples analyzed, about 1 percent of 1,623 wells contained concentrations of chloride and 27 percent of 1,624 wells sampled contained concentrations of iron that exceeded the USEPA SMCL. Twenty-seven percent of 1,397 wells sampled contained water with manganese concentrations greater than the USEPA SMCL. Sulfate concentrations in the water of 3 percent of 1,699 wells sampled and total dissolved solids in the water from 10 percent of 1,590 wells sampled exceeded the USEPA SMCL. Concentrations of cadmium, chromium, cyanide, mercury, nickel, radium-226, selenium, and zinc in the water exceeded the USEPA maximum contaminant level (MCL) in less than 5 percent of the 183 to 620 wells sampled. Nine percent of 625 wells sampled contained water with lead concentrations that exceeded the USEPA MCL. Radon concentrations in the water of 92 percent of the 285 wells sampled exceeded the proposed USEPA MCL. Radium-228 in the water of 10 percent of the 240 wells sampled and nitrate in the water of 13 percent of 1,413 wells sampled exceeded the USEPA MCL. Gross-alpha activity in the water was measured only in the Chickies and Harpers Formations of the Piedmont Upland, with 23 percent of the 168 wells sampled exceeding the USEPA MCL.

Water-Resources Investigations Report↗
USGS2020

Simulation of groundwater flow in the regional aquifer system on Long Island, New York, for pumping and recharge conditions in 2005–15

A three-dimensional groundwater-flow model was developed for the aquifer system of Long Island, New York, to evaluate (1) responses of the hydrologic system to changes in natural and anthropogenic hydraulic stresses, (2) the subsurface distribution of groundwater age, and (3) the regional-scale distribution of groundwater travel times and the source of water to fresh surface waters and coastal receiving waters. The model also provides the groundwater flow components used to define model boundaries for possible inset models used for local-scale analyses. The three-dimensional, groundwater flow model developed for this investigation uses the numerical code MODFLOW–NWT to represent steady-state conditions for average groundwater pumping and aquifer recharge for 2005–15. The particle-tracking algorithm MODPATH, which simulates advective transport in the aquifer, was used to estimate groundwater age, delineate the areas at the water table that contribute recharge to coastal and freshwater bodies, and estimate total travel times of water from the water table to discharge locations. A three-dimensional, 1-meter (3.3-foot) topobathymetric model was used to determine land-surface altitudes for the island and seabed altitudes for the surrounding coastal waters. The mapped extents and surface altitudes of major geologic units were compiled and used to develop a three-dimensional hydrogeologic framework of the aquifer system, including aquifers and confining units. Lithologic data from deep boreholes and previous aquifer-test results were used to estimate the three-dimensional distribution of hydraulic conductivity in principal aquifers. Natural recharge from precipitation was estimated for 2005–15 using a modified Thornthwaite-Mather methodology as implemented in a soil-water balance model. Components of anthropogenic recharge—wastewater return flow, storm water inflow, and inflow from leaky infrastructure—also were estimated for 2005–15. Groundwater withdrawals for various sources, including public water supply, industrial, remediation, and agricultural, were compiled or estimated for the same period. These data were incorporated into the model development to represent the aquifer system geometry, boundaries, and initial hydraulic properties of the regional aquifers and confining units within the Long Island aquifer system. Average hydraulic conditions—water levels and streamflows—for 2005–15 were estimated using existing data from the U.S. Geological Survey National Water Information System database. Model inputs were adjusted to best match average hydrologic conditions using inverse methods as implemented in the parameter-estimating software PEST. The calibrated model was used to simulate average hydrologic conditions in the aquifer system for 2005–15. About 656 cubic feet per second of water was withdrawn on average annually for 2005–15 for water supply and an average of about 349 cubic feet per second of water recharged the aquifer annually from return flow and leaky infrastructure. Parts of New York City have drawdowns exceeding 25 feet, mostly because of urbanization and associated large decreases in recharge rates. Large areas in the western part of the island have drawdowns exceeding 10 feet, mostly from large groundwater withdrawals and sewering, which largely eliminates wastewater return flow. Water-table altitudes in eastern parts of the island increased by more than 2 feet in some areas as a result of wastewater return flow in unsewered areas and changes in land use. Changes in streamflows show a similar pattern as water-table altitudes. Streamflows generally decrease in western parts of the island where there are large drawdowns and increase in eastern parts of the island where water-table altitudes increase.

New York↗
USGS2014

Report of the committee on underground waters, 1938–39

In preparing the report of the Committee on Underground Waters of the Section of Hydrology for the final year of the triennium, it becomes evident that the collection of fundamental data relating to the hydrology of underground waters continues at a rate comparable to that maintained in the past few years, and perhaps even at an accelerated rate. Almost every extensive practical investigation of ground‐water supplies offers some opportunity for study of fundamental problems, in fact many of them require such fundamental study. With a larger number of investigations in progress, and with fairly liberal appropriations much new and valuable information is being discovered. Some idea of the increase in ground‐water studies since the organization of the Section of Hydrology may be given by a few statistics on the work of the Division of Ground‐Water of the Federal Geological Survey, which does the largest amount of ground‐water work in the United States. In 1932 the Division worked on about 50 projects in 25 States, in 15 of which and in Hawaii the investigations were made in cooperation with States, or other local Governmental agencies. During the current fiscal year work has been completed, or is in progress, on about 100 investigations in 35 States, Hawaii, and the Virgin Islands. The number of States cooperating on the work has increased to 24. During the current fiscal year about \$375,000 will be spent for ground‐water investigations by the Federal Geological Survey and cooperating organizations, as compared to about $175,000 spent during the fiscal year ended June 30, 1932.

Eos, Transactions, American Geophysical Union↗
USGS2014

Petrophysical properties, mineralogy, fractures, and flow tests in 25 deep boreholes at Yucca Mountain, Nevada

As part of a site investigation for the disposal of radioactive waste, numerous boreholes were drilled into a sequence of Miocene pyroclastic flows and related deposits at Yucca Mountain, Nevada. This report contains displays of data from 25 boreholes drilled during 1979–1984, relatively early in the site investigation program. Geophysical logs and hydrological tests were conducted in the boreholes; core and cuttings analyses yielded data on mineralogy, fractures, and physical properties; and geologic descriptions provided lithology boundaries and the degree of welding of the rock units. Porosity and water content were computed from the geophysical logs, and porosity results were combined with mineralogy from x-ray diffraction to provide whole-rock volume fractions. These data were composited on plates and used by project personnel during the 1990s. Improvements in scanning and computer technology now make it possible to publish these displays.

Nevada↗
USGS1993

The Loma Prieta, California, earthquake of October 17, 1989: Preseismic observations

The October 17, 1989, Loma Prieta, Calif., Ms=7.1 earthquake provided the first opportunity in the history of fault monitoring in the United States to gather multidisciplinary preearthquake data in the near field of an M=7 earthquake. The data obtained include observations on seismicity, continuous strain, long-term ground displacement, magnetic field, and hydrology. The papers in this chapter describe these data, their implications for fault-failure mechanisms, the scale of prerupture nucleation, and earthquake prediction in general. Of the 10 papers presented here, about half identify preearthquake anomalies in the data, but some of these results are equivocal. Seismicity in the Loma Prieta region during the 20 years leading up to the earthquake was unremarkable. In retrospect, however, it is apparent that the principal southwest-dipping segment of the subsequent Loma Prieta rupture was virtually aseismic during this period. Two M=5 earthquakes did occur near Lake Elsman near the junction of the Sargent and San Andreas faults within 2.5 and 15 months of, and 10 km to the north of, the Loma Prieta epicenter. Although these earthquakes were not on the subsequent rupture plane of the Loma Prieta earthquake and other M=5 earthquakes occurred in the preceding 25 years, it is now generally accepted that these events were, in some way, foreshocks to the main event.

California↗