USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geological Society of America Bulletin”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,666 records · Page 71Linked to original sources
USGS2025

Evidence for fluid pressurization of fault zones and persistent sensitivity to injection rate beneath the Raton Basin

Subsurface wastewater injection has increased the seismicity rate within the Raton Basin over more than two decades, with the basin-wide injection rate peaked between 2009-2015. To understand the evolution of injection-induced earthquakes, we systematically analyzed 2016-2024 broadband recordings with a machine-learning-based phase picker and constructed a catalog with 95,993 earthquakes (-1≤ M L ≤4.3). We then inverted for full centroid moment tensors (CMT) for 90 M L ≥ 2 events, with a special interest in constraining the non-double-couple components via probabilistic metrics. Both relocations and CMT solutions support basement-rooted normal faults, including graben and half-graben structures. Furthermore, we observe the non-double-couple components that imply elevated pore pressure in the fault zones. An earthquake cluster emerged in the north-central basin in 2023, preceded by ~1-yr of increased injection volume from wells within 15km. Despite a basin-wide decrease in the injection volume, we highlights the persistence of seismicity that remains to sensitive to injection rates within the Raton Basin.

Colorado, New Mexico↗
USGS1997

An optimized network for phosphorus load monitoring for Lake Okeechobee, Florida

Phosphorus load data were evaluated for Lake Okeechobee, Florida, for water years 1982 through 1991. Standard errors for load estimates were computed from available phosphorus concentration and daily discharge data. Components of error were associated with uncertainty in concentration and discharge data and were calculated for existing conditions and for 6 alternative load-monitoring scenarios for each of 48 distinct inflows. Benefit-cost ratios were computed for each alternative monitoring scenario at each site by dividing estimated reductions in load uncertainty by the 5-year average costs of each scenario in 1992 dollars. Absolute and marginal benefit-cost ratios were compared in an iterative optimization scheme to determine the most cost-effective combination of discharge and concentration monitoring scenarios for the lake. If the current (1992) discharge-monitoring network around the lake is maintained, the water-quality sampling at each inflow site twice each year is continued, and the nature of loading remains the same, the standard error of computed mean-annual load is estimated at about 98 metric tons per year compared to an absolute loading rate (inflows and outflows) of 530 metric tons per year. This produces a relative uncertainty of nearly 20 percent. The standard error in load can be reduced to about 20 metric tons per year (4 percent) by adopting an optimized set of monitoring alternatives at a cost of an additional $200,000 per year. The final optimized network prescribes changes to improve both concentration and discharge monitoring. These changes include the addition of intensive sampling with automatic samplers at 11 sites, the initiation of event-based sampling by observers at another 5 sites, the continuation of periodic sampling 12 times per year at 1 site, the installation of acoustic velocity meters to improve discharge gaging at 9 sites, and the improvement of a discharge rating at 1 site.

Florida↗
USGS2024

Quality of groundwater used for domestic supply in the eastern Sacramento Valley and adjacent foothills, California

Summary More than 2 million Californians rely on groundwater from privately owned domestic wells for drinking-water supply. This report summarizes a water-quality survey of domestic and small-system drinking-water supply wells in the eastern Sacramento Valley and adjacent foothills where more than 25,000 residents are estimated to use privately owned domestic wells. Study results show that inorganic and organic constituents in groundwater were present above regulatory (maximum contaminant level, MCL) benchmarks for public drinking-water quality in 8 and 3 percent, respectively, of the aquifer area used for domestic drinking-water supply (herein, “domestic groundwater resources”; fig. 1). The only inorganic constituent detected above regulatory benchmarks was arsenic. The only organic constituent exceeding regulatory benchmarks was the fumigant 1,2,3-trichloropropane (1,2,3-TCP). Three additional organic constituents—the disinfection by-product chloroform, the gasoline oxygenate methyl tert -butyl ether (MTBE), and the solvent tetrachloroethene (PCE)—were detected at low concentrations below one-tenth of regulatory benchmarks in 34, 10, and 10 percent of domestic groundwater resources, respectively. Total dissolved solids (TDS), iron, and manganese exceeded non-regulatory aesthetic guidelines for drinking water in 5, 10, and 26 percent of domestic groundwater resources, respectively. Per- and polyfluoroalkyl substances (PFASs) were detected in 29 percent of domestic groundwater resources,with 5 percent exceeding the recently enacted (April 2024) U.S. Environmental Protection Agency MCLs. Total coliform and enterococci bacteria were detected in 13 and 8 percent of domestic groundwater resources, respectively. Redox sensitive constituents in this study included arsenic, manganese, nitrate, and iron. In the lower elevation portions of the eastern Sacramento Valley study area, reducing conditions in groundwater aquifers promote elevated arsenic, iron, and manganese, and conversely lower concentrations of nitrate. The presence of the volatile organic compound (VOC) 1,2,3-TCP was related to its past history in select agricultural land uses (on orchards or vineyards) in the Sacramento Valley; however, unlike in the San Joaquin Valley where orchards and vineyards are more common, its detection frequency was low (only detected in one well in this study). Chloroform was frequently detected in this study at low levels. Chloroform is a disinfection byproduct commonly found in domestic wells treated by shock chlorination. The solvent PCE is among the most frequently detected VOCs in groundwater, which is primarily related to its long history of use and its persistence in groundwater in oxic conditions. The gasoline oxygenate MTBE was a contaminant introduced to groundwater through atmospheric exchange when it was used as a fuel additive to decrease smog inducing emissions from vehicles. Its occurrence in groundwater at low levels is expected and makes it a potentially useful tracer of relatively recent recharge water being withdrawn from wells. The PFASs are anthropogenic chemicals with hundreds of uses, and they have been incorporated into many different products, processes, and applications worldwide. Like MTBE, the occurrence of PFASs in groundwater may be in part due to atmospheric exchange, but there are several other pathways that contribute PFASs to the environment.

California↗
USGS2025

Concentration-discharge relations and transient metal loads reveal spatiotemporal variability in solute-generation mechanisms in a mine-affected watershed

Concentration-discharge (CQ) relations are commonly used to understand geochemical and hydrologic controls on the generation of solutes in watersheds. Despite the widespread application of CQ relations, this technique has been infrequently applied to acid mine drainage (AMD) sites, but the CQ framework may allow mechanistic understanding of remedial outcomes such as impoundment of water within underground mines. Results of CQ analyses and changes in metal loads in an AMD affected watershed in Colorado, USA indicate that dissolved loads increased at many individual locations following water impoundment within mine workings. Although increased loads were observed at most individual locations, these increases were offset by a large decrease in loading from the largest mine. A loading analysis that included data from an instream monitoring location showed a statistically significant decrease in Fe and Zn after bulkhead emplacement, indicating a net positive effect of bulkheads. Streams generally displayed dilution CQ patterns whereas mines and springs showed either flushing or chemostatic patterns prior to bulkheading, which transitioned to chemostatic patterns following bulkheading, indicating a transition from dynamic to equilibrium geochemical processes. Saturation indices for sulfide and secondary minerals indicated that mines and springs were near equilibrium for phases including schwertmannite, fluorite, and gypsum. Saturation indices vary through time for mines suggesting progressive leaching of sulfide minerals as the mass of available minerals in the mine workings decreases. Together, these diverse analyses provide an integrated understanding of the variability in solute generating processes in this watershed and may inform remediation plans for similarly affected sites by indicating the nature of mineralogic controls on water quality.

Colorado↗
USGS2024

Ambient flow and transport in long-screened, sand-packed wells: Insights into cross contamination and wellbore flow

The presence of long-screened wells with a surrounding sand pack can have a major effect on the redistribution of contaminants in groundwater, particularly when the wells are set in low-hydraulic conductivity aquifers. Such redistribution, or cross contamination, can occur through vertical flow and advective transport or by in-well mixing via multiple non-advective transport processes. A multi-method approach, including the use of single borehole dilution tracer (SBDT) logging, was undertaken to estimate vertical transport of trichloroethylene (TCE) in 8 discontinued remedial extraction wells, all constructed with long screens (100 ft, or 30.6 m long) and surrounding sand packs, at Site 25, Edwards Air Force Base, California. The site is within an enclosed drainage basin that is underlain primarily by quartz-monzonite-granitic rocks in various states of weathering. Prior to this study, little information was available on the depths of fracture zones intersecting the wellbores. Results indicate that because of in-well mixing processes, a potential redistribution of TCE of up to 9 g/d per well occurs as a consequence of leaving the wells inactive (unpumped) and unsealed, as measured by SBDT logging. Simulations of flow made with a generic model of the site show that if the wells were to be sealed with well liners, with the intent of reducing vertical TCE transport but the sand pack left intact, TCE transport decreases by 53% overall compared to leaving the wells unlined.

Environmental Earth Sciences↗
USGS1998

Stream habitat characteristics at selected sites in the Georgia-Florida coastal plain

Habitat characterization is part of a multidisciplinary approach to water-quality assessment implemented by the National Water-Quality Assessment Program. Habitat data were collected in the Georgia-Florida Coastal Plain study unit at 24 sites during 1993-95. Data were collected for habitat characteristics at three spatial scales: basin, segment, and reach. Basin data include physiography, land resource provinces, and land use, providing a description of the environmental setting at each site. Segment data include length, gradient, and sinuosity. A Kendall correlation analysis performed on segment characteristics and the log-of-basin area showed a correlation between segment gradient and the log-of-basin area and a correlation between sinuosity and segment length. Reach data consist of field-collected measurements of both instream and riparian habitats. Sand and detritus were the most common channel-bed substrates among the sampled sites. Measurements of channel width, water depth, and bank width and height were used to create cross-sectional profiles of each sampled area. Elevations of selected durations plotted on cross sections illustrated the percentage of time that the banks were inundated at each site. Sites were divided into two groups based on duration of bank inundation (less than or equal to 1 percent and greater than 1 percent). Bank woody vegetation was also sampled and a clustering algorithm known as Two-Way INdicator SPecies ANalysis (TWINSPAN) was used to analyze these data. TWINSPAN divided the sites into two groups based on their vegetation composition. A statistical comparison of the two types of site groups (duration of bank inundation and vegetation) was performed. The significant association between these groups was consistent with the hypothesis that inundation frequency affected riparian vegetation.

Florida, Georgia↗
USGS2024

Using a time-of-travel sampling approach to quantify per- and polyfluoroalkyl substances (PFAS) stream loading and source inputs in a mixed-source, urban catchment

Understanding per- and polyfluoroalkyl substances (PFAS) mass distribution in surface and groundwater systems can support source prioritization, load reduction, and water management. Thirteen sites within an urban catchment were sampled utilizing a time-of-travel sampling approach to minimize the influence of subdaily fluctuations in mass from PFAS point sources and to quantify PFAS and ancillary chemical loads from various PFAS sources. A larger increase in perfluoroalkyl sulfonate (PFSA) loads (8 to 11 μg/s, up to 618%) than in perfluoroalkyl carboxylate (PFCA) loads (no change to 3.4 μg/s, up to 122%) was observed at sites below tributaries influenced by military bases with known groundwater discharge. Point discharges from two sewage treatment plants (STPs) resulted in increases in PFCA and PFSA loads that were similar (6 and 10 μg/s respectively) below the first STP and greater for PFCA compared to PFSA loads (23 and 13 μg/s respectively) below the second STP. Overall, percent increases in total PFAS load ranged from 20 to 277% for military base inputs and 44 to 77% for STP inputs. A focus catchment that represents only 14% (76.9 km 2 ) of the drainage area at the most downstream site (544 km 2 ) accounted for about 70% of PFSA and 40% of PFCA loads observed at the most downstream site. Results show that by using a time-of-travel sampling approach in mixed, urban settings with several PFAS sources, it is possible to quantify stream loads from individual PFAS sources, thereby improving source attribution and providing actionable data for water-resource managers.

ACS ES&T Water↗
USGS2026

Diverging mineral chemistry of iron and nickel throughout Earth’s changing redox conditions reveals foundation for their evolution as protein cofactors

Iron (Fe) and nickel (Ni) were both foundational to early metabolism, yet their biological trajectories diverged as Earth’s surface redox state changed. Here, we integrate mineral chemistry network analysis, protein metal-site coordination-sphere analysis, and curated redox comparisons to test how geochemistry and metalloprotein architecture co-evolved. Mineral network analyses show broader electronegativity variation and network diversity for Fe-bearing minerals through time relative to Ni-bearing minerals. In structural analyses of protein metal centers in a combined Fe/Ni protein structure set, it is shown that Fe- and Ni-associated environments differ in amino-acid composition, hydropathy structure, and cysteine representation. The greater chemical diversity and electronegativity variation in Fe minerals mirror the higher redox and structural versatility of Fe-binding proteins. The presence of Fe in a broader range of mineral and protein environments demonstrates the chemical adaptability of the metal, from the anoxic Archean to oxidative Earth surface conditions following the Great Oxidation Event. Iron, with its broad redox potential range in Fe-oxidoreductases, has a central role in both anaerobic and aerobic metabolisms. Nickel, by contrast, is less widespread in biology. Today, Ni is predominantly employed in deeply branching anaerobic pathways and by proteins with narrower redox potential ranges. Our results show that evolutionary processes, constrained by metal chemistry, habitually utilize Fe as a redox generalist while retaining Ni in specialized roles. The divergent paths of Ni and Fe, from rocks to proteins, demonstrate the intimate relationship between planetary geochemistry and metabolic origins on Earth and suggest that Fe/Ni geochemistry may inform habitability assessments in extraterrestrial environments when interpreted within specific planetary environmental contexts.

Life↗
USGS2025

Groundwater-storage change in the north Phoenix aquifer, Arizona, 2020–23

The city of Phoenix, Arizona, relies primarily on surface water for municipal water supply. The city also maintains wells to withdraw groundwater, particularly in times of drought and reduced surface-water supply, and to recharge groundwater when excess surface water is available. As of 2023, withdrawals from the aquifer in the northeastern part of the city are a small volume of water, less than 3,000 acre-feet in most years. Each year a similar volume of water is recharged through injection wells. The withdrawal wells are permitted to produce in total more than 20,000 acre-feet per year; increased pumping could lead to future groundwater-storage declines. To better understand groundwater-storage change in the north Phoenix aquifer, a repeat microgravity monitoring network was established in 2020. Measurements of changes in Earth’s gravity provide a direct, non-invasive measurement of subsurface mass change. Groundwater-storage changes were small during the 2020–23 study period, consistent with the relatively small volumes of pumping and recharge. Groundwater levels measured in monitoring wells were stable or increased slightly during this period, although the number of monitoring wells within the area of the gravity monitoring network is sparse. In total, about 15,000 acre-feet of water were pumped and 31,000 acre-feet recharged through injection in the north Phoenix aquifer during the 2020–22 period. Within the monitored area, groundwater storage increased by a small amount, about 1,000 acre-feet, in 2020, and decreased by a larger amount, about 6,000 acre-feet, each year in 2021 and 2022. Storage decreased at 89 of 102 stations from 2020 to 2023. Groundwater-storage decreases greater than the volume of net pumping indicate down-gradient subflow from the aquifer is greater than recharge plus incoming subflow, drying of the unsaturated zone resulting from decreased land-surface recharge, or both. At present (2023), the aquifer appears able to store and supply the relatively small amounts of water needed without excessive drawdown or harmful effects, such as land subsidence and surface inundation. If pumping or recharge increases in the future, the established repeat microgravity network is well suited to capture the spatial extent and magnitude of groundwater-storage changes in the aquifer.

Arizona↗
USGS1996

Technique for estimating magnitude and frequency of peak flows in Maryland

A convenient and reliable technique for estimating flood magnitudes is required for effective flood-plain management and for the efficient design of bridges, culverts, embankments, and flood-protection structures. Methods are presented for estimating peak-flow magnitudes of selected frequencies, ranging from 2 to 500 years, for all nontidal drainage basins in Maryland. The methods were developed by generalized least-squares regression techniques using data from 219 gaged basins in and near Maryland. The State is divided into five hydrologic regions: the Appalachian Plateaus and Allegheny Ridges region, the Blue Ridge and Great Valley region, the Piedmont region, the Western Coastal Plain region, and the Eastern Coastal Plain region. These regions correspond to the physiographic provinces of the State, with the exceptions that (1) the Coastal Plain Province is divided into two hydrologic regions, and (2) there is no distinct hydrologic region corresponding to the Valley and Ridge Province as it is divided into its constituent Allegheny Ridges and Great Valley subdivisions. Sets of equations for calculating peak discharges based on physical basin characteristics are provided for each of the regions. Based on the peak-flow equations, methods for estimating peak flows are presented for ungaged and gaged streams in Maryland. The methods and equations are supported by generalized least-squares analysis of basin and flood-frequency characteristics data from 219 drainage basins in and near Maryland. estimates for each of the five regions are calculated using combinations of the fol-lowing basin characteristics: drainage area, forest cover, basin relief, carbonate rock coverage, storage, and runoff-curve number. Drainage area contributes to the estimate in all five study regions. Carbonate rock coverage is used only in the Blue Ridge and Great Valley region. Storage and runoff-curve number are used solely in the Eastern Coastal Plain region. All other basin characteristics are used in two or more regions. Standard errors of estimate for the regression equations range from 19 to 31 percent in the Appalachian Plateaus and Allegheny Ridges region, 34 to 47 percent in the Blue Ridge and Great Valley region, 33 to 48 percent in the Piedmont region, 45 to 64 percent in the Western Coastal Plain region, and 36 to 42 percent in the Eastern Coastal Plain region.

Maryland↗
USGS2021

Geology, mineralogy, and cassiterite geochronology of the Ayawilca Zn-Pb-Ag-In-Sn-Cu deposit, Pasco, Peru

The Ayawilca deposit in Pasco, Peru, represents the most significant recent base-metal discovery in the central Andes and one of the largest undeveloped In resources globally. As of 2018, it hosts an 11.7 Mt indicated resource grading 6.9% Zn, 0.16% Pb, 15 g/t Ag, and 84 g/t In, an additional 45.0 Mt inferred resource grading 5.6% Zn, 0.23% Pb, 17 g/t Ag, and 67 g/t In, and a separate Sn-Cu-Ag inferred resource of 14.5 Mt grading 0.63% Sn, 0.21% Cu, and 18 g/t Ag. Newly obtained U–Pb dates for cassiterite by LA-ICP-MS (22.77 ± 0.41 and 23.05 ± 2.06 Ma) assign the Ayawilca deposit to the Miocene polymetallic belt of central Peru. The polymetallic mineralization occurs as up to 70-m-thick mantos hosted by carbonate rocks of the Late Triassic to Early Jurassic Pucará Group, and subordinately, as steeply dipping veins hosted by rocks of the Pucará Group and overlying Cretaceous sandstones-siltstones of the Goyllarisquizga Group. Relicts of a distal retrograde magnesian skarn and cassiterite (stage pre-A) were identified in the deepest mantos. The volumetrically most important mineralization at Ayawilca comprises a low-sulfidation assemblage (stage A) with quartz, pyrrhotite, arsenopyrite, chalcopyrite, Fe-rich sphalerite, and traces of stannite and herzenbergite. Stage A sphalerite records progressive Fe depletion, from 33 to 10 mol% FeS, which is compatible with the observed transition from low- to a subsequent intermediate-sulfidation stage (B) marked by the crystallization of abundant pyrite and marcasite. Finally, during a later intermediate-sulfidation stage (C) sphalerite (up to 11 mol% FeS), galena, native bismuth, Cu-Pb-Ag sulfosalts, siderite, Mn-Fe carbonates, kaolinite, dickite, and sericite were deposited. This paragenetic evolution shows striking similarities with that at the Cerro de Pasco Cordilleran-type polymetallic deposit, even if at Ayawilca stage C did not reach high-sulfidation conditions. The occurrence of an early retrograde skarn assemblage suggests that the manto bodies at Ayawilca formed at the transition between distal skarn and skarn-free (Cordilleran-type) carbonate-replacement mineralization. Mineral assemblages define a T- f S 2 evolutionary path close to the pyrrhotite-pyrite boundary. Buffering of hydrothermal fluids by underlying Devonian carbonaceous phyllites of the Excelsior Group imposed highly reduced conditions during stage A mineralization (log f O 2 < − 30 atm). The low f O 2 favored efficient Sn mobility during stages pre-A and A, in contrast to other known ore deposits in the polymetallic belt of central Peru, in which the occurrence of Sn minerals is minor. Subsequent cooling, progressive sealing of vein walls, and decreasing buffering potential of the host rocks promoted the shift from low- (stage A) to intermediate-sulfidation (stages B and C) states. LA-ICP-MS analyses reveal significant In contents in Fe-rich sphalerite (up to 1.7 wt%), stannite (up to 1908 ppm), and chalcopyrite (up to 1185 ppm). The highest In content was found in stage A sphalerite that precipitated along with chalcopyrite and stannite, thus pointing to the early, low-sulfidation assemblage as prospective for this high-tech metal in similar mineral systems. Indium was likely incorporated into the sphalerite crystal lattice via Cu + + In 3+ ↔ 2 Zn 2+ and (Sn, Ge) 4+ + (Ga, In) 3+ + (Cu + Ag) + ↔ 4 Zn 2+ coupled substitutions. Indium incorporation mechanisms into the stannite and chalcopyrite crystal lattices remain unclear.

Pasco↗
USGS2026

Repeated coral bleaching events have eroded reef accretion potential in the Florida Keys

Coral bleaching is now the primary driver of coral-reef degradation globally, threatening the persistence of coral-reef functions and the invaluable ecosystem services they support. The Florida Keys have been impacted by four severe, regional-scale coral-bleaching events, which occurred in 1997–1998, 2005, 2014–2015, and 2023. Our aim in this study was to quantify the effects of those thermal-stress events on the persistence of coral-reef structures. We leveraged long-term coral-reef monitoring data to quantify the impacts of coral bleaching on coral cover, carbonate production, and reef-accretion potential throughout the Florida Keys from 1996–2024. Our study indicates that coral bleaching drove significant declines of reef-building corals, which successively diminished regional-scale reef-accretion potential (from 1.65 ± 0.33 mm y -1 in 1996) and culminated with a regional-scale transition to net reef erosion (-0.12 ± 0.08 mm y -1 ) following the 2023 event. Coral bleaching was the primary driver of declining reef-building capacity, with the cumulative impacts of the four coral-bleaching events accounting for >75% of total declines since 1996. The 1997–1998 event alone drove ~50% of overall declines, largely due to losses of the shallow-water ecosystem engineer, Acropora palmata . More moderate impacts of thermal stress on regional reef-accretion potential in 2005 (6%) and 2014–2015 (9%) could lend some support to the hypothesis that the remaining corals were more thermally tolerant; however, the unprecedented thermal stress event in 2023 caused widespread coral-bleaching and bleaching-related mortality, and caused an additional 12% of the total decline in reef-accretion potential. Stony-coral tissue loss disease accounted for an additional 6% of the decline, with the remaining 19% unexplained. Coral bleaching has already dramatically reshaped the structure and function of coral reefs in the Florida Keys over the last three decades. With the high likelihood that thermal stress will accelerate moving forward, the persistence of Florida’s essential coral-reef functions and services is uncertain.

Florida↗
USGS2026

Structural evolution of iron coordination in proteins across Earth’s oxygenation history

Protein metal-binding sites support essential biological functions shaped by protein fold, subunit interactions, and cofactor chemistry. Because these sites encode both biochemical function and environmental constraint, they offer a route to connect protein evolution with changes in Earth’s surface environment through time. Of particular interest is iron (Fe), the most widely used metal in biology and a cofactor central to both anaerobic and aerobic metabolism. Here, we systematically compare the immediate chemical environments of functionally essential Fe-binding sites in three-dimensional protein structures to test whether Fe coordination spheres differ across oxygen contexts. Using a curated dataset of experimentally determined structures, we identify a clear shift in the local chemistry of Fe-binding environments from anaerobic to aerobic proteins. Aerobic Fe sites are significantly more hydrophilic than anaerobic ones, and amino-acid composition analyses show reduced cysteine use in aerobic Fe-binding neighborhoods. These patterns suggest that as Earth’s surface environments became more oxygenated, proteins retained Fe as a core redox metal while reconfiguring local coordination chemistry in ways less vulnerable to oxidative damage. More broadly, this study introduces and applies the Coordination Sphere Analysis and Comparison (CSAC) workflow, an open and archived Python workflow for extracting local metal-binding environments from structure datasets, providing a framework for linking metalloprotein structure to evolutionary and geobiological transitions across Earth history.

Discover Life↗
USGS2025

Wangyanite, PdNi8S8, a new Pd end-member mineral of the pentlandite group from the J-M reef, Stillwater Complex, Montana, USA

Wangyanite (IMA2024-008a), ideally PdNi 8 S 8 , is a Pd end-member mineral of the pentlandite group that was discovered in the J-M reef of the Stillwater Complex, Montana, USA. Wangyanite occurs as anhedral-subhedral granular crystals 200–400 µm in size, associated with isoferroplatinum, braggite, pentlandite, and chalcopyrite interstitial to plagioclase grains within anorthosite. Wangyanite exhibits a yellowish brown color with a black streak and a metallic luster. It is brittle with uneven fractures, and has a calculated density of 5.14 g/cm 3 . The mineral does not show discernible pleochroism, bireflectance, or anisotropy. It has an average composition of 9.95 wt.% Pd, 31.95 wt.% Ni, 25.02 wt.% Fe, 0.57 wt.% Co, 31.74 wt.% S, totaling 99.23 wt.%. The empirical formula, based on eight sulfur atoms per formula unit, is (Pd 0.76 Co 0.08 ) Σ0.84 (Ni 4.39 Fe 3.60 ) Σ7.99 S 8 . Wangyanite has a cubic cell with a space group of Fm -3 m (#225), having lattice parameters of a = 10.1167(12) Å, V = 1035.4(4) Å 3 , and Z = 4. Its crystal structure has been solved by single-crystal three-dimensional electron diffraction study. The strongest X-ray diffraction lines of wangyanite are claculated at [ d in Å ( I %)( hkl )]: 5.841(14.03)(111), 3.050(100)(311), 1.947(29.16)(115,333), 1.264(11.66)(800), 3.577(8.79)(220), 2.920(20.82)(222), and 2.321(9.34)(331). Wangyanite shares the same crystal structure as pentlandite, but the octahedrally coordinated site is mainly occupied by Pd in wangyanite. Based on the textural features and previous experimental Pd-Fe-Ni-S phase system, wangyanite could form by peritectic reaction between braggite, pentlandite and sulfide liquid. These mineral associations are stable in a Ni-Pd-rich sulfide melt system at about 550 °C or even lower temperature. Therefore, wangyanite can potentially serve as an indicator of the presence of Pd-rich residual melts. The mineral is named in honor of Prof. Christina Yan Wang, a well-known researcher on platinum-group element (PGE) occurrences and enrichment mechanisms in mafic-ultramafic intrusions, notably those deposits related to the Emeishan large igneous province in China.

Montana↗
USGS2026

Dynamic drainage reorganization in Eastern Tibet: Insights from the Yangtze River first bend

The modern drainage network of eastern Tibet is widely believed to have developed through a series of river capture and flow reversal events; however, the timing and mechanisms driving this reorganization remain contentious. Among these events, the river capture that formed the First Bend of the Yangtze River (YFB) stands out as both iconic and particularly debated. Here we present sedimentary provenance data from the Late Miocene–Quaternary Dali Basin, located south of the YFB, which indicate that a southward-flowing Jinsha River (i.e., the present-day upper Yangtze River) sourced sediment to the Dali basin at ∼7.4–6.4 Ma in a drainage configuration different from that of today. Because this interval postdates the initial establishment of a near-modern Jinsha River system prior to the Miocene, our results imply at least two discrete fluvial reorganizations occurred at the YFB—one preceding ∼7.4 Ma and another following ∼6.4 Ma. By integrating these findings with landscape evolution modeling, we infer that the initiation of rapid uplift of the Yulong-Haba Mountains and the Diancang Shan may have been responsible for these drainage reorganizations. These results underscore that Cenozoic drainage systems on the eastern Tibetan Plateau have evolved dynamically on a short timescale of ∼10 5 –10 6 -year, rather than remaining in a long-term stationary configuration on ∼10 7 -year timescales.

eastern Tibetan Plateau, first bend of the Yangtze↗
USGS2000

Storm impact scale for barrier islands

A new scale is proposed that categorizes impacts to natural barrier islands resulting from tropical and extra-tropical storms. The proposed scale is fundamentally different than existing storm-related scales in that the coupling between forcing processes and the geometry of the coast is explicitly included. Four regimes, representing different levels of impact, are defined. Within each regime, patterns and relative magnitudes of net erosion and accretion are argued to be unique. The borders between regimes represent thresholds defining where processes and magnitudes of impacts change dramatically. Impact level 1 is the 'swash' regime describing a storm where runup is confined to the foreshore. The foreshore typically erodes during the storm and recovers following the storm; hence, there is no net change. Impact level 2 is the 'collision' regime describing a storm where the wave runup exceeds the threshold of the base of the foredune ridge. Swash impacts the dune forcing net erosion. Impact level 3 is the 'overwash' regime describing a storm where wave runup overtops the berm or, if present, the foredune ridge. The associated net landward sand transport contributes to net migration of the barrier landward. Impact level 4 is the 'inundation' regime describing a storm where the storm surge is sufficient to completely and continuously submerge the barrier island. Sand undergoes net landward transport over the barrier island; limited evidence suggests the quantities and distance of transport are much greater than what occurs during the 'overwash' regime.

Journal of Coastal Research↗
USGS2026

A Lake Charr pangenome reveals highly conserved Ohnologs as drivers of phenotypic diversity

Whole-genome duplication (WGD) is hypothesized to spur evolutionary diversification by producing genome-wide duplicate gene sets (Ohnologs) that are initially functionally redundant but can diverge markedly as the effects of relaxed selection accumulate over time. However, the underlying mechanisms remain unclear, in part because genomic studies often reconstruct Ohnolog evolution over millions of years, during which subsequent mutations can obscure deep-time signals. Investigating the relationship between Ohnolog evolution and diversification on a contemporary timescale offers clearer insights. We explore this relationship in Lake Charr ( Salvelinus namaycush ), where ∼10% of genes are retained highly conserved polyploid duplicates following the Salmonid-Specific Fourth Round WGD. Using 31 chromosome-level assemblies of Lake Charr from morphologically and ecologically diverse populations, joined into a pangenome graph, we characterized 189,555 structural variants (SVs) that were significantly less likely to affect genes retained as sequence-conserved Ohnolog pairs, nuancing the hypothesis that gene redundancy, relaxed selection, and functional diversification are intertwined. However, we found that SVs affecting such conserved Ohnologs may be potent drivers of adaptive evolution. Notably, we identified a putative 938-Kb interchromosomal translocation containing 25 genes with highly conserved Ohnologs in a paralogous (but untranslocated) genomic block. This putative translocation appears to have facilitated Ohnolog divergence in ankrd11 and hp , genes putatively linked to craniofacial and lipid metabolic diversity in sympatric Lake Superior morphs. This research reveals that conserved Ohnologs previously presumed to be redundant remain a reservoir for adaptive change.

BioRxiv↗
USGS2024

Wave propagation in layered soil deposits

Recent advances in the general theory of viscoelastic waves and rays in layered media provide a rigorous mathematical framework for site-specific, soil-response models used for earthquake resistant design. The advances provide general closed-form anelastic solutions for the classic problems of the response of a stack of soil layers to S and P waves, ray theory for reflected and refracted waves, Rayleigh- and Love-Type surface waves, and head waves. These general solutions valid for anelastic media regardless of the amount of material damping yield new insights regarding the characteristics of seismic waves and their ray paths that are not provided by conventional models. They provide corresponding numerical ground-response models and ray-tracing computation algorithms that account for changes in velocity and attenuation of anelastic waves associated with changes in inhomogeneity of the waves induced by anelastic soil and soil-rock boundaries. These anelastic effects manifest themselves as variations in amplitude response, amplitude attenuation, raypath location, and travel time as observed at the Earth’s surface. Implications of these anelastic effects for soil-response models used for earthquake resistant design are provided herein.

Conference Paper↗