SEARCH · USGS Science

Results for “Ecology of Freshwater Fish”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 71Linked to original sources

USGS2026

Groundwater budget for the Mountain Home area, southern Idaho, 2022–23

The U.S. Geological Survey, with funding from the Idaho Department of Water Resources, developed a groundwater budget for the Mountain Home area in southern Idaho for irrigation year 2023 (November 1, 2022–October 31, 2023). This study focused on the water balance across the Cinder Cone Butte Critical Groundwater Area (CGWA), Mountain Home Groundwater Management Area (GWMA), and the rest of the study area (RoSA), compiling data from various sources, including precipitation records, groundwater level measurements, metered groundwater pumpage data, surface water diversions and evapotranspiration (ET) estimates derived from remote sensing satellite imagery, and ground-based reference data. Key inflow components included recharge from applied surface water irrigation (which incorporates incidental recharge from irrigation practices and conveyance losses), estimated tributary streamflow, and estimated mountain block recharge. The key outflow components were groundwater pumpage for irrigation, municipal, industrial, and domestic uses, and ET. Recharge from applied irrigation and mountain block recharge were the largest inflows, and groundwater pumpage for irrigation was the largest outflow. The CGWA had a positive groundwater budget residual of 2,170 acre-feet (acre-ft), which contrasts with observed long-term groundwater level declines and historical trends of storage depletion. This positive residual is likely associated with unquantified outflows, including lateral groundwater flow out of the subregion, or other complexities, such as overestimated tributary contributions relative to the actual recharge for the 2023 water budget. The GWMA exhibited a positive residual of 56,563 acre-ft, primarily owing to recharge from applied surface water irrigation and areal recharge during a wetter-than-average year, which allowed irrigation entities to deliver more water from in-basin and out-of-basin reservoirs. The RoSA showed a large positive residual of 124,933 acre-ft. The interpretation of these positive residuals must account for significant uncertainties, including estimations of areal recharge, tributary streamflow (particularly losses and diversions), ET, the volume of surface water loss to the Snake River, lateral groundwater flows between subregions and across study area boundaries, and the unquantified groundwater discharge to the Snake River. These uncertainties, in combination with the complex hydrogeologic controls on water movement and limitations of remotely sensed data, directly affect the accuracy of water availability assessments. Future data collection efforts would help reduce these uncertainties and support water resource management decisions in the Mountain Home area. Key efforts could include installing additional streamflow gaging stations (particularly to quantify tributary losses and gains and surface water losses to the Snake River), improving groundwater pumpage metering, and validating remotely sensed ET data with ground-based measurements. Furthermore, to better quantify unrepresented or highly uncertain fluxes, focused investigations on groundwater discharge to the Snake River, lateral groundwater flows between subregions and across study area boundaries, and a more robust determination of the actual influence and volume of mountain block recharge would help refine future water availability assessments for the Mountain Home area.

Idaho↗

USGS2024

Exploring the dynamic interactions between the Southern San Andreas Fault and a normal fault under the Salton Sea

We investigate the dynamic interactions between the Southern San Andreas Fault (SSAF) and a proximal normal fault (NF) beneath the Salton Sea in southern California. The NF, positioned near the SSAF terminus at Bombay Beach, exhibits 11–15 displacement events across 14 stratigraphic sequences, with a range of 0.2–1.4 m of vertical offset since ∼2–3 ka. Notably, four of these events may align temporally with SSAF earthquakes, raising questions about the possible interplay between the two faults. Utilizing dynamic rupture models, we analyze the coseismic interactions between the SSAF and NF, addressing under what conditions the SSAF induces slip on the NF. Our findings reveal that a suite of SSAF ruptures, particularly those propagating from north to south, can trigger slip on the normal fault and replicate observed vertical offsets. If the SSAF extends beneath the Salton Sea, earthquakes originating south of the NF intersection are less likely to trigger normal fault slip, although we cannot exclude this possibility. Some SSAF ruptures do not trigger discernible slip on the NF, rendering such events undetectable in the stratigraphic record. Our research contributes toward discussions regarding the seismic hazard in southern California, shedding light on the interplay between the SSAF and NF.

California↗

USGS1990

Recharge rates and aquifer hydraulic characteristics for selected drainage basins in middle and east Tennessee

Quantitative information concerning aquifer hydrologic and hydraulic characteristics is needed to manage the development of ground-water resources. These characteristics are poorly defined for the bedrock aquifers in Middle and East Tennessee where demand for water is increasing. This report presents estimates of recharge rate, storage coefficient, diffusivity, and transmissivity for representative drainage basins in Middle and East Tennessee, as determined from analyses of stream-aquifer interactions. The drainage basins have been grouped according to the underlying major aquifer, then statistical descriptions applied to each group, in order to define area1 distribution of these characteristics. Aquifer recharge rates are estimated for representative low, average, and high flow years for 63 drainage basins using hydrograph analysis techniques. Net annual recharge during average flow years for all basins ranges from 4.1 to 16.8 in/yr (inches per year), with a mean value of 7.3 in. In general, recharge rates are highest for basins underlain by the Blue Ridge aquifer (mean value11.7 in/yr) and lowest for basins underlain by the Central Basin aquifer (mean value 5.6 in/yr). Mean recharge values for the Cumberland Plateau, Highland Rim, and Valley and Ridge aquifers are 6.5, 7.4, and 6.6 in/yr, respectively. Gravity drainage characterizes ground-water flow in most surficial bedrock aquifer in Tennessee. Accordingly, a gravity yield analysis, which compares concurrent water-level and streamflow hydrographs, was used to estimate aquifer storage coefficient for nine study basins. The basin estimates range from 0.002 to 0.140; however, most estimates are within a narrow range of values, from 0.01 to 0.025. Accordingly, storage coefficient is estimated to be 0.01 for all aquifers in Middle and East Tennessee, with the exception of the aquifer in the inner part of the Central Basin, for which storage coefficient is estimated to be 0.002. Estimates of aquifer hydraulic diffusivity are derived from estimates of the streamflow recession index and drainage density for 75 drainage basins; values range from 3,300 to 130,000 ft^2/d (feet squared per day). Basin-specific and site-specific estimates of transmissivity are computed from estimates of hydraulic diffusivity and specific-capacity test data, respectively. Basin-specific, or areal, estimates of transmissivity range from 22 to 1,300 ft^2/d, with a mean of 240 ft^2/d In general, areal transmissivity is highest for basins underlain by the Cumberland Plateau aquifer (mean value 480 ft^2/d) and lowest for basins underlain by the Central Basin aquifer (mean value 79 ft^2/d). Mean transmissivity values for the Highland Rim, Valley and Ridge, and Blue Ridge aquifer are 320,140, and 120 ft^2/d respectively. Site-specific estimates of transmissivity, computed from specific-capacity data from 118 test wells in Middle and East Tennessee range from 2 to 93,000 ft^2/d with a mean of 2,600 ft^2/d Mean transmissivity values for the Cumberland Plateau, Highland Rim, Central Basin, Valley and Ridge, and Blue Ridge aquifers are 2,800,1,200, 7,800, 390, and 65Oft Id, respectively.

Tennessee↗

USGS1976

Heat-flow data from southeastern Oregon

With the exception of values from two holes drilled within 2 km of Mickey Hot Springs, 17 new heat-flow values in southeastern Oregon are within or somewhat below the range one would normally expect in non-anomalous parts of the North American Cordillera. This is not surprising for a region in which most igneous rocks on the surface are 5 m.y. old or more. There is a suggestion of a thermal anomaly associated with the very young (late Pleistocene or Holocene) Diamond Craters lava field, and the thermal regime on both sides of Steens Mountain seems to be controlled, to some degree, by lateral and vertical movement of water.

Oregon↗

USGS2024

Parameter ESTimation with the Gauss–Levenberg–Marquardt algorithm: An intuitive guide

In this paper, we review the derivation of the Gauss–Levenberg–Marquardt (GLM) algorithm and its extension to ensemble parameter estimation. We explore the use of graphical methods to provide insights into how the algorithm works in practice and discuss the implications of both algorithm tuning parameters and objective function construction in performance. Some insights include understanding the control of both parameter trajectory and step size for GLM as a function of tuning parameters. Furthermore, for the iterative Ensemble Smoother (iES), we discuss the importance of noise on observations and show how iES can cope with non-unique outcomes based on objective function construction. These insights are valuable for modelers using PEST, PEST++, or similar parameter estimation tools.

Groundwater↗

USGS2025

Deterministic physics-based earthquake sequence simulators match empirical ground-motion models and enable extrapolation to data poor regimes: Application to multifault multimechanism ruptures

We use the deterministic earthquake simulator RSQSim to generate complex sequences of ruptures on fault systems used for hazard assessment. We show that the source motions combined with a wave propagation code create surface ground motions that fall within the range of epistemic uncertainties for the Next Generation Attenuation‐West2 set of empirical models. We show the model is well calibrated where there are good data constraints, and has good correspondence in regions with fewer data constraints. We show magnitude, distance, and mechanism dependence all arising naturally from the same underlying friction. The deterministic physics‐based approach provides an opportunity for better understanding the physical origins of ground motions. For example, we find that reduced stress drops in shallow layers relative to constant stress drop with depth lead to peak ground velocities in the near field that better match empirical models. The simulators may also provide better extrapolations into regimes that are poorly empirically constrained by data because physics, rather than surface shaking data parameterizations, is underlying the extrapolations. Having shown the model is credible, we apply it to a problem where observations are lacking. We examine the case of crustal faults above a shallow subduction interface seen to break coseismically in simulations of the New Zealand fault system. These types of events were left out of consideration in the most recent New Zealand national seismic hazard model due to the modeling complexity and lack of observational data to constrain ground‐motion models (GMMs). Here, we show that in the model, by breaking up the coseismic crustal and interface rupturing fault motions into two separate subevents, and then recombining the resulting ground‐motion measures in a square‐root‐of‐sum‐of‐squares incoherent manner, we reproduce well the ground‐motion measures from the full event rupture. This provides a new method for extrapolating GMMs to more complex multifault ruptures.

Seismological Research Letters↗

USGS2024

Federal lands greenhouse gas emissions and sequestration in the United States: Estimates for 2005–22

In 2016, the Secretary of the U.S. Department of the Interior requested that the U.S. Geological Survey (USGS) produce a publicly available and annually updated database of estimated greenhouse gas emissions associated with the extraction and use of fossil fuels from Federal lands. The first report in this series included emissions estimates from 2005 to 2014 and were reported for 29 States and two offshore areas. Native American and Tribal lands were not included in that analysis. This report recalculates those previous years (2005–14) with updated data and methods and extends the estimates to 2022. Nationwide emissions from fossil fuels produced on Federal lands in 2022 were 1,081.2 million metric tons of carbon dioxide equivalent (MMT CO 2 Eq.) for CO 2 , 33.4 MMT CO 2 Eq. for methane (CH 4 ), and 4.3 MMT CO 2 Eq. for nitrous oxide (N 2 O). Compared to 2005, the 2022 totals represent decreases in emissions for all three greenhouse gases (by 17 percent for CO 2 , 37 percent for CH 4 , and 30 percent for N 2 O). Emissions from fossil fuels produced on Federal lands represent, on average, 21.8 percent of U.S. emissions for CO 2 , 6.1 percent for CH 4 , and 1.3 percent for N 2 O over the 18 years included in this estimate. The trends and relative magnitudes of the greenhouse gas emissions estimated are roughly parallel to the Federal lands fossil fuel production volumes. In 2021, Federal lands of the conterminous United States stored 70,424 MMT CO 2 Eq. in terrestrial ecosystems. Soils stored most of the terrestrial ecosystem carbon (66 percent), followed by live vegetation (25 percent), deadwood (5 percent), and litter (4 percent). Carbon sequestration on Federal lands was highly variable over time, owing primarily to interannual variability in climate and weather, and variability in land use and land cover (LULC) change and disturbances, among these are wildfires and logging. Between 2005 and 2021, Federal lands sequestered an average of 83 MMT CO 2 Eq./yr. By subtracting the cumulative effects of LULC and disturbance-related CO 2 losses to the atmosphere from the total, we estimate that ecosystems at the national level sequestered CO 2 at an annual mean rate of 17 MMT CO 2 Eq./yr in a term called the net ecosystem exchange (NEE). This annual NEE sequestration value represents about 1.4 percent of average fossil fuel emissions over the same period. The USGS estimates presented in this report represent an accounting for the emissions resulting from fossil fuel extraction on Federal lands and the end-use combustion of those fuels, as well as for the sequestration of carbon in terrestrial ecosystems on Federal lands. A combined net CO 2 emissions estimate, which is the difference between the emitted and sequestered CO 2 from both the fossil fuel and ecosystems estimates, provides context for evaluating the greenhouse gas contributions of activities on these lands. The estimates included in this report can provide context for future energy decisions, as well as a basis to track change in the future.

Scientific Investigations Report↗

USGS2024

Predicting hydrothermal reservoir depth from chemical geothermometers using a three-dimensional temperature model in the Great Basin, USA

Recent work in the Great Basin region of the western United States has made it possible to predict the depth of hydrothermal reservoirs (i.e., the depth at which heat is accumulated prior to ascent via hydrothermal upflow) identified through geochemistry and to contextualize the spatial patterns of these reservoir depths. Chemical geothermometers use the chemical and mineral constituents of hydrothermal fluids to predict the temperature at which fluids equilibrated with the host rocks at depth. Assuming that most of the Great Basin is dominated by conductive conditions until a vertically connected hydrothermal flow path is created (e.g., by faulting), geothermometers reflect the chemical and thermal conditions at the depth interval that the fluid has conductively equilibrated over a long period before a vertical conduit allows convective upflow. By pairing geothermometer temperature estimates with our recent three-dimensional temperature model of conductive heat flow in the Great Basin, we estimate the corresponding reservoir depths and construct a map of circulation depths. The predicted depths from geothermometers have spatial patterns across the Great Basin that relate to patterns seen in other geologic and geophysical data. Deeper springs generally occur disproportionately in areas with higher strain rates and in basins. We posit that current elevated strain rates reflect patterns of historic deformation where ongoing tectonic activity maintains permeable pathways to deeper reservoirs, some of which are estimated to exceed 6 km depth. Basins, as expected, contain a disproportionate number of these deep systems, because the underlying aquifers are closer to the surface in basins, thus requiring less water pressure to reach the surface than in mountain ranges. Most springs estimated to have their source in a deep reservoir occur at places known to host a hydrothermal system; these refined depth estimates of the source reservoir can help to better constrain the source depth for many known hydrothermal systems across the Great Basin.

Arizona, California, Idaho, Nevada, Oregon, Utah↗

USGS2026

A practical decision tool for marine bird mortality assessments

Given the rise in anthropogenic, environmental, and disease events contributing to marine bird mortality, there is a critical need to improve the rigor of mortality assessments. Deficits in data collection and mortality estimation can hinder a manager’s ability to document the scale of events and assess population level impacts. Therefore, to inform decisions required during activities, such as conservation status assessments or harvest management, organizations may choose to incorporate mortality assessments into response plans. Resources, capacity, and assets to assess mortality vary across jurisdictions (federal, state, Indigenous, local, etc.), and clear guidance to support mortality assessments is often unavailable or not clearly addressed. Here, we present a decision support tool to help managers identify and evaluate survey options to assess bird mortality in a diverse array of scenarios. The objective of the decision tool is to improve data collection and availability, which will increase the ability to estimate mortality robustly, given situation-specific attributes and constraints. This decision tool is designed to guide the response when a mortality event is initially encountered and offers suggestions for assessment and reporting procedures in the absence of other guidance or to complement existing protocols. The decision tool is also meant to inform decision making for response determination and resource allocation. The tool facilitates examination of options for further assessment and monitoring, which users determine by examining questions pertaining to species prioritization, determination of mortality minimum spatial extent, and the potential magnitude of impacts on affected species. Finally, identification of appropriate survey methods that address imperfect detection when a complete census is not possible are determined by exploring location, spatial and temporal extent, and the type of species affected. Ultimately, this decision tool aims to facilitate and improve the standardization of mortality assessments, equipping managers with a practical resource to navigate the decision-making process for marine bird mortality estimation.

Ornithological Applications↗

USGS2025

Chemical and isotopic fractionation during melt inclusion formation

Melt inclusions are used to study the origin and evolution of magmas. The extent to which they represent equilibrium melt compositions, however, critically hinges on the ratio of crystal growth rate to diffusion rate in melts. If the rate of crystal growth is limited by the supply of nutrients and the dissipation of unwanted components, the trapped melt will be depleted in compatible elements and enriched in incompatible elements. Despite widespread recognition of the potential for melt inclusions to trap disequilibrium compositions, their identification remains a challenge. Here, we demonstrate how stable isotopes provide a solution to this problem. Melt inclusions in basaltic tephra from Kīlauea volcano, Hawai‘i, display Mg isotope fractionation up to 0.49‰ ( 26 Mg/ 24 Mg) relative to bulk rock. These observations indicate that kinetic processes, such as chemical diffusion, are at play, as equilibrium mineral-melt isotope fractionation at high temperatures is an order of magnitude smaller. We propose that the heavy Mg isotopic compositions of the melt inclusions were generated by the faster diffusion and thus preferential incorporation of 24 Mg by the growing olivine, leaving the slower diffusant ( 26 Mg) behind. The incompatible elements (e.g., Ca, Ti, and K) are predicted to display similarly large fractionations when boundary layer effects are significant. These findings show that stable isotopes can be a useful tool in identifying disequilibrium compositions in melt inclusions.

Geology↗

USGS2024

Developments in African industrial minerals for renewable energy

Introduction Africa is emerging as a leading source for minerals used in the manufacture of batteries for electric vehicles and in other renewable energy applications. New graphite, lithium, and rare-earth mines have or could be opened in African countries from 2017 through 2026. Estimates of production capacities for graphite, lithium, and rare-earth mines for 2023 and beyond are based upon supply-side assumptions, such as announced plans for new capacity construction and bankable feasibility studies, as well as projected trends that could affect current producing facilities in 2023 and planned new facilities projected to come online by 2026. Forward-looking information, including estimates of future production capacities, graphite flake distributions, and timing of the start of operations, are subject to risk factors and uncertainties that could cause actual events or results to differ significantly from expected outcomes. Projects listed in this report are presented as an indication of industry plans and are not a U.S. Geological Survey (USGS) prediction of what will take place. Only projects with planned startup dates are included in this report; ther graphite, lithium, and rare-earth projects in Africa without startup dates were known to be in various stages of development but are not included in this fact sheet.

Fact Sheet↗

USGS2025

Insights into widespread landsliding in southern Appalachia from Hurricane Helene

Between 23 and 27 September 2024, antecedent rain followed by Hurricane Helene produced one of the most damaging weather events in southern Appalachia history. The back-to-back storm events resulted in a maximum cumulative rainfall of 848 mm and hurricane-force wind gusts over 170 km/h in western North Carolina, eastern Tennessee, and southwestern Virginia. The resulting regional flooding, landslides, and tree blowdown caused over 100 fatalities, damaged or destroyed critical infrastructure and thousands of structures, and severed connectivity across the region. Over the next several weeks, a multi-agency landslide response produced a rapid hazard assessment and mapped 2217 landslides, 55% of which damaged infrastructure or property. Orographic uplift enhanced rainfall, resulting in concentrated landsliding along the ~250 km swath of the Blue Ridge escarpment in western North Carolina. Landslides initiated predominantly on windward-facing (southeast-facing) slopes, and localized clustering of initiation points indicated a strong influence of hillslope-scale meteorological and geomorphic factors. Many shallow landslides mobilized into larger, highly mobile, and damaging debris flows that graded into floods. Here, we put our preliminary observations in the context of historical storm-driven landslide events and open new avenues for investigating the nature and extent of landslides and their effects in southern Appalachia and similar environments.

Georgia, North Carolina, South Carolina, Tennessee↗

USGS2024

Earthquake relocations delineate discrete a fault network and deformation corridor throughout Southeast Alaska and Southwest Yukon

Deformation in southeastern Alaska and southwest Yukon is governed by the subduction and translation of the Pacific-Yakutat plates relative to the North American plate in the St. Elias region. Despite notable historical seismicity and major regional faults, studies of the region between the Fairweather and Denali faults are complicated by glacial coverage and the remote setting. In the last decade, significant improvements have been made to the density of regional broadband seismometer networks. We relocate more than 5,000 earthquakes between 2010 and 2021 in the region of southeastern Alaska and southwestern Yukon utilizing these improved seismic networks. With reductions in catalog uncertainty, particularly in depth, we quantify the thickness of the seismogenic layer in the crust throughout the region and locate seismicity on a shallow network of upper-crustal faults. Relocated earthquakes, combined with an updated focal-mechanism catalog, permit estimating and classifying motion of active faults. This includes mapping the Totschunda-Fairweather “Connector” fault, which plays an important role in explaining regional deformation, and identifying new faults like the Kathleen Lake fault. We draw similarities between our seismic observations and simplified conceptual models of regional tectonics, which describe a dominant transpressional regime and localized slip partitioning. Our results support a hypothesis where current deformation is taking place on a well-defined and evolved network of shallow faults in the corridor between the Totschunda-Fairweather “Connector” and Denali faults.

Alaska, Yukon↗

USGS2025

Forecast, monitor, adapt: A multi-agency strategy to protect people from postfire debris flows

In 2020, a wildfire burned across Glenwood Canyon in Colorado, USA. A history of postfire debris flows in the region and a hazard assessment for the burn area indicated that potentially life-threatening debris flows could be triggered by rainfall within months of a wildfire. As a result, four government agencies evaluated strategies to help mitigate hazards, including the loss of human life, that may be associated with debris-flow events. After the fire, 26 large debris flows occurred in the summer of 2021 and three sediment-laden flows occurred in the summer of 2023, but there were no major injuries or fatalities reported. We found that integrating hazard assessment/ forecasting, monitoring, and adaptation scenarios was a successful strategy for reducing postfire debris-flow risks to human life (including injuries and fatalities). Weather forecasts and estimates of debris-flow triggering rainfall thresholds, likelihood, and volume were used to anticipate the timing, location, and magnitude of debris-flow events. Rainfall monitoring and detailed recordkeeping of storms that triggered debris flows were used to validate and update debris-flow warning thresholds that varied with time following the wildfire. Although the governmental agencies working in this burn area had distinct and differing agency mandates, they were able to integrate information to reduce the risk of debris-flow events to human life.

Colorado↗

USGS2000

Suspended-sediment characteristics in the Housatonic River Basin, western Massachusetts and parts of eastern New York and northwestern Connecticut, 1994-96

Suspended-sediment concentrations, discharges, loads, and yields were determined for eight subbasins in the Housatonic River Basin in western Massachusetts, eastern New York, and northwestern Connecticut from April 1994 through March 1996. Suspended-sediment samples were collected at three continuous-record sediment stations and at four partial-record sediment stations. Suspended-sediment concentrations in samples collected during the period of study ranged from less than 0.5 to 3,400 milligrams per liter, and concurrent streamflows ranged from 0.03 to 126 cubic feet per second per square mile at the seven stations. Median suspended-sediment concentrations in samples collected at each station ranged from 7 to 61 milligrams per liter. Median streamflows during suspended-sediment sampling ranged from 1.86 to 5.88 cubic feet per second per square mile. Instantaneous suspended-sediment yields ranged from less than 0.005 to 185 tons per day per square mile, and medians ranged from 0.03 to 1.12 tons per day per square mile at the seven stations. Total suspended-sediment loads (mass) from April 1994 through March 1996 at the continuous-record sediment stations were 11,603 tons at Housatonic River near Great Barrington, 7,929 tons at Green River, and 54,347 tons at Housatonic River near Ashley Falls. Suspended-sediment load during January 1996 at the Green River station accounted for about 54 percent of the total suspended-sediment load for the Green River during the 2-year study. Suspended-sediment load on January 19 and 20, 1996, at the Green River station accounted for about 50 percent of the January 1996 suspended-sediment load, or about 27 percent of the total suspended-sediment load during the 2-year study. This large suspended-sediment transport was the result of rainfall and snowmelt on January 19 and 20, 1996--the equivalent of a 5- to 6-inch rain storm in the Green River subbasin. Total suspended-sediment loads during the 2-year study at the partial-record sediment stations were 3,052 tons at Williams River, 1,758 tons at Ironworks Brook, and 17,927 tons at Konkapot River. Suspended-sediment yields from April 1994 through March 1996 at the continuous-record sediment stations were 21 (tons/yr)/mi 2 at Housatonic River near Great Barrington, 78 (tons/yr)/mi 2 at Green River, and 58 (tons/yr)/mi 2 at Housatonic River near Ashley Falls. Suspended-sediment yields during the 2- year study at the partial-record sediment stations were 35 (tons/yr)/mi 2 at Williams River, 78 (tons/yr)/mi 2 at Ironworks Brook, and 147 (tons/yr)/mi 2 at Konkapot River. Suspended-sediment yields were estimated for two subbasins in the Housatonic River Basin--Schenob Brook at Sheffield, a partial-record sediment station, and the area adjacent to the Housatonic River between Great Barrington and Ashley Falls. The estimate of suspended-sediment yield at Schenob Brook at Sheffield of 82 (tons/yr)/mi 2 is comparable to the yield determined for the Green River and Ironworks Brook. The estimate of suspended-sediment yield for the area adjacent to the Housatonic River between Great Barrington and Ashley Falls was 395 (tons/yr)/mi 2 . This estimated suspended-sediment yield was 2.7 to 18.8 times greater than that estimated for any of the other subbasins. Several basin and land-use characteristics thought to affect suspended-sediment transport in the subbasins were compared to the suspended-sediment yields. The characteristics that seemed to affect suspended-sediment discharge were dams, which contributes to decreased yields; Hadley, Limerick, Linlithgo, Saco, and Winooski silt loam soils (high erodibility soils), which contributes to increased yields; stratified-drift deposits, which contributes to increased yields; and agricultural and open land, which contributes to increased yields. The effect of stratified-drift deposits on suspended-sediment discharge is thought to be greater when those deposits are of glaciolacustrine (generally clay, silt, and fine sand), rather than glaciofluvial (clay, silt, sand, gravel, and cobbles) origin. The silt loam soils, glaciolacustrine deposits, and agricultural and open land are interrelated, inasmuch as the silt loam soils generally are associated with glaciolacustrine deposits and agricultural activities.

Connecticut, Massachusetts, New York↗

USGS2026

Distinguishing natural from mining-related metal sources by including streambank groundwater data in a stream mass loading study

Distinguishing stream metal loading caused by mine features from that caused by natural background sources remains challenging, yet this distinction is essential for making effective remedial decisions at many legacy mine sites. We combine a stream tracer injection and synoptic sampling study with data from shallow near-stream groundwater wells to estimate left-bank versus right-bank metal loading contributions at the 100-m spatial scale. The study was performed in the East Mancos River, a mountain headwater stream in Colorado, USA. The dominant source of elevated stream metal concentrations could be either groundwater infiltration through right-bank Doyle Mine waste piles or natural acid rock drainage from hydrothermally altered bedrock located mainly on the left bank. For the five metals of concern (Cu, Al, Zn, Cd, and Mn), we find that 15 % of the load contributed by diffuse groundwater inputs in the section potentially influenced by Doyle mine waste originates from the right bank. This right-bank potential mine contribution equates to only 3 % of the total watershed instream load for these metals. Furthermore, apparent 3 H/ 3 He groundwater ages in segments contributing most of the right-bank metal loading are sufficiently old (9–12 yr) to suggest that infiltration through the waste piles, located only 140–180 m from the stream, is unlikely. Estimated potential Doyle mine loading contributions can therefore be considered maximum values. Study results thus indicate that Doyle mine waste piles are a minor source of metal loading under low-flow conditions, and streambank groundwater data can provide valuable additional information in stream mass loading studies.

Colorado↗

USGS1989

Techniques for simulating flood hydrographs and estimating flood volumes for ungaged basins in east and west Tennessee

A dimensionless hydrograph developed for a variety of basin conditions in Georgia was tested for its applicability to streams in East and West Tennessee by comparing it to a similar dimensionless hydrograph developed for streams in East and West Tennessee. Hydrographs of observed discharge at 83 streams in East Tennessee and 38 in West Tennessee were used in the study. Statistical analyses were performed by comparing simulated (or computed) hydrographs, derived by application of the Georgia dimensionless hydrograph, and dimensionless hydrographs developed from Tennessee data, with the observed hydrographs at 50 and 75% of their peak-flow widths. Results of the tests indicate that the Georgia dimensionless hydrography is virtually the same as the one developed for streams in East Tennessee, but that it is different from the dimensionless hydrograph developed for streams in West Tennessee. Because of the extensive testing of the Georgia dimensionless hydrograph, it was determined to be applicable for East Tennessee, whereas the dimensionless hydrograph developed from data on streams in West Tennessee was determined to be applicable in West Tennessee. As part of the dimensionless hydrograph development, an average lagtime in hours for each study basin, and the volume in inches of flood runoff for each flood event were computed. By use of multiple-regression analysis, equations were developed that relate basin lagtime to drainage area size, basin length, and percent impervious area. Similarly, flood volumes were related to drainage area size, peak discharge, and basin lagtime. These equations, along with the appropriate dimensionless hydrograph, can be used to estimate a typical (average) flood hydrograph and volume for recurrence-intervals up to 100 years at any ungaged site draining less than 50 sq mi in East and West Tennessee.

Tennessee↗

USGS2025

Factors influencing landslide occurrence in low-relief formerly glaciated landscapes: Landslide inventory and susceptibility analysis in Minnesota, USA

In landscapes recently impacted by continental glaciation, landslides may occur where topographic relief has been generated by the drainage of glacial lakes and ensuing post-glacial fluvial network development into unconsolidated glacially derived sediments and exhumed bedrock. To investigate linkages among environmental variables, post-glacial landscape development, and landslides, we created a landslide inventory of nearly 10,000 landslides in five regions of the formerly glaciated low-relief state of Minnesota, USA. Multivariate logistic regression indicates the importance of slope angle, lithology, and the development of stream valleys to landslide distribution. Areas underlain by fine-grained glaciolacustrine and nearshore deposits that are incised by streams are particularly prone to shallow (<1-2 m depth) landslides. Landslides also occur in a wide range of glacial and fluvial deposits, and as rockfall in layered Paleozoic sedimentary rocks in central and southern Minnesota and Precambrian igneous and sedimentary rocks in northeastern Minnesota. Although no more than 1-2% of the studied regions are susceptible to landslides, they can pose risk to life and safety, damage infrastructure, and impact water quality. The combination of recently generated low-relief steep slopes, extensive unconsolidated sediments, and layered sedimentary bedrock make this formerly glaciated landscape more susceptible to landslides than current national-scale models indicate.

Minnesota↗