USGS Science⌕ Search

SEARCH · USGS Science

Results for “Current Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71Linked to original sources
USGS2022

The Bathy-drone: An autonomous unmanned drone-tethered sonar system

A unique drone-based system for underwater mapping (bathymetry) was developed at the University of Florida. The system, called the “Bathy-drone”, comprises a drone that drags, via a tether, a small vessel on the water surface in a raster pattern. The vessel is equipped with a recreational commercial off-the-shelf (COTS) sonar unit that has down-scan, side-scan, and chirp capabilities and logs GPS-referenced sonar data onboard or transmitted in real time with a telemetry link. Data can then be retrieved post mission and plotted in various ways. The system provides both isobaths and contours of bottom hardness. Extensive testing of the system was conducted on a 5 acre pond located at the University of Florida Plant Science and Education Unit in Citra, FL. Prior to performing scans of the pond, ground-truth data were acquired with an RTK GNSS unit on a pole to precisely measure the location of the bottom at over 300 locations. An assessment of the accuracy and resolution of the system was performed by comparison to the ground-truth data. The pond ground truth had an average depth of 2.30 m while the Bathy-drone measured an average 21.6 cm deeper than the ground truth, repeatable to within 2.6 cm. The results justify integration of RTK and IMU corrections. During testing, it was found that there are numerous advantages of the Bathy-drone system compared to conventional methods including ease of implementation and the ability to initiate surveys from the land by flying the system to the water or placing the platform in the water. The system is also inexpensive, lightweight, and low-volume, thus making transport convenient. The Bathy-drone can collect data at speeds of 0–24 km/h (0–15 mph) and, thus, can be used in waters with swift currents. Additionally, there are no propellers or control surfaces underwater; hence, the vessel does not tend to snag on floating vegetation and can be dragged over sandbars. An area of more than 10 acres was surveyed using the Bathy-drone in one battery charge and in less than 25 min.

Drones↗
USGS2013

Book review: Biology and conservation of martens, sables, and fishers: A new synthesis

Mammals of the genus Martes , including martens, sables, and fishers, are mid-sized carnivores inhabiting many forested ecosystems throughout regions of North America, Europe, and Asia. This volume provides a comprehensive synthesis of the current state of knowledge pertaining to the biology and conservation of Martes species throughout the world. This volume will be an essential resource for mammalogists, resource managers, and applied ecologists involved in research or conservation of martens, sables, and fishers. For that matter, anyone seeking a full immersion in the modern world of Martes biology and conservation will not be disappointed. The volume has been carefully edited and reviewed, and the thoroughness with which the authors present and interpret recent advances in their specialty areas is really quite impressive. Review info: Biology and conservation of martens, sables, and fishers: A new synthesis. Edited by K.B. Aubry, W.J. Zielinski, M.G. Raphael, G. Proulx, and S.W. Buskirk, 2012. ISBN: 978-08014, 580pp.

Northwest Science↗
USGS2003

The Hula Valley subsurface structure inferred from gravity data

We use the 3-D gravity inversion technique to model the shape of the Hula basin, a pull-apart basin along the Dead Sea Transform. The interpretation was constrained using the Notera-3-well density logs and current geological knowledge. The model obtained by inversion shows a rhomb-shaped graben filled with approximately 4 km of young sediments in the deepest part of the basin. The reliability of this model was verified using 3-D forward modeling with an accuracy of 0.5 km. Curvature attributes of the gravity field depict the main fault pattern, suggesting that the Hula basin is a subsiding rhomb-shaped graben, bordered by steep-sided, deep basement faults on the western and eastern sides (Qiryat Shemona and Jordan River faults) and by gradual, en-echelon step faults on the southern and northern margins of the basin. ?? 2003 Laser Pages Publishing Ltd.

Israel Journal of Earth Sciences↗
USGS2012

Introduction to emergent wetlands: Chapter A in Emergent wetlands status and trends in the northern Gulf of Mexico: 1950-2010

Throughout the past century, emergent wetlands have been declining across the Gulf of Mexico. Emergent wetland ecosystems provide a plethora of resources including plant and wildlife habitat, commercial and recreational economic activity, water quality improvement, and natural barriers against storms. As emergent wetland losses increase, so does the need for information on the causes and effects of these losses, for emergent wetland mapping, for monitoring and restoration efforts, and for increased education. The U.S. Geological Survey (USGS) and the U.S. Environmental Protection Agency’s Gulf of Mexico Program Office (EPA GMPO) are committed to providing the best science to restore, enhance, and protect these important ecosystems. The Emergent Wetlands Status and Trends Report is a continuation of the completed Seagrass Status and Trends in the Northern Gulf of Mexico Report (Handley and others, 2007), both of which serve to update the EPA GMPO Status and Trends of Emergent and Submerged Vegetated Habitats of Gulf of Mexico Coastal Waters, USA Report (Duke and Kruczynski, 1992). The Emergent Wetlands Status and Trends Report is also part of the Gulf of Mexico Alliance Ecosystems Integration and Assessment Priority Issue Team’s work plan to provide resources that will aid in the ecological and economic enhancement of the Gulf of Mexico region. The purpose of this report is to provide scientists, managers, and citizens with valuable baseline information on the status and trends of emergent wetlands along the coast of the Gulf of Mexico. The study upon which this report is based examines the emergent wetlands of eight individual estuarine areas within the northern Gulf of Mexico region and presents statewide summaries for Texas, Louisiana, Mississippi, Alabama, and Florida. Each estuarine area is detailed in vignettes that address current status and historical trends of estuarine and palustrine emergent wetlands, emergent wetlands mapping and monitoring, causes of status change, restoration and enhancement activities, background information for the study area, and the methodology employed to analyze and document the historical trends and current status of emergent wetlands. The eight individual estuarine areas examined in this report are:  Corpus Christi/ Nueces/Aransas Bays, Tex.  Galveston Bay, Tex.  Barataria/Terrebonne Bay, La.  Mississippi Delta, La.  Mississippi Sound, Miss.  Mobile Bay, Ala.  Florida Panhandle, Fla.  Tampa Bay, Fla.

Report↗
USGS2019

Gravity surveys using a mobile atom interferometer

Mobile gravimetry is important in metrology, navigation, geodesy, and geophysics. Atomic gravimeters could be among the most accurate mobile gravimeters, but are currently constrained by being complex and fragile. Here, we demonstrate a mobile atomic gravimeter, measuring tidal gravity variations in the laboratory as well as surveying gravity in the field. The tidal gravity measurements achieve a sensitivity of 37 μGal/√Hz (1 μGal=10 nm/s2) and a long-term stability of better than 2 μGal, revealing ocean tidal loading effects and recording several distant earthquakes. We survey gravity in the Berkeley Hills with an uncertainty of around 0.04 mGal and determine the density of the subsurface rocks from the vertical gravity gradient. With simplicity and sensitivity, our instrument paves the way for bringing atomic gravimeters to field applications.

Science Advances↗
USGS2024

Using mercury and lead stable isotopes to assess mercury, lead, and trace metal source contributions to Great Salt Lake, Utah, USA

Great Salt Lake is a critical habitat for migratory birds that is threatened by elevated metal concentrations, including mercury (Hg) and lead (Pb), and is subject to severe hydrologic changes, such as declining lake level. When assessing metal profiles recorded in Great Salt Lake sediment, a large data gap exists regarding the sources of metals within the system, which is complicated by various source inputs to the lake and complex biogeochemistry. Here, we leverage Hg and Pb stable isotopes to track relative changes in metal source contributions to Great Salt Lake over time. Mercury and Pb concentrations increase in sediments deposited after 1920 and peak between 1965 and 1995, following closure of several local smelters and the onset of increased emission controls. The nominal associations above are confirmed via Hg stable isotopes in pre-1920 background sediments, which reflect atmospheric inputs from regional and global origin, whereas Hg and Pb stable isotopes together indicate that elevated metal concentrations in mid-late 20th century sediments reflect increased mining/smelting inputs. The observed minimal rebound towards pre-1920 Pb isotope signatures in 21st century sediments indicates that mining/smelting inputs, though reduced, remain a primary source of Pb to Great Salt Lake. In contrast, the more pronounced rebound of Hg stable isotope signatures to pre-1920 values indicate a greater contribution of atmospheric inputs of regional/global origin to current Hg inputs, though Hg concentrations are ∼10 times greater than pre-1920 background values due to global increases in atmospheric Hg concentrations or possibly slow recovery from local contamination. The importance of regional/global Hg sources to the system suggests that reductions in Hg bioaccumulation in the open water food webs of Great Salt Lake are more dependent on national and global reductions in Hg emissions and management strategies to limit methylmercury production within system. This work highlights the utility of using coupled Hg and Pb stable isotope values to assess trace metal pollution sources and pathways in aquatic systems.

Utah↗
USGS2006

Assessing possible thermal rearing restrictions for juvenile coho salmon (Oncorhynchus kisutch) through thermal infrared imaging and in-stream monitoring, Redwood Creek, California

We quantified patterns in stream temperature in a northern coastal California river using thermal infrared (TIR) imaging and in-stream monitoring and related temperature patterns to the historical and present distributions of juvenile coho salmon (Oncorhynchus kisutch). In Redwood Creek, California, water temperature increased from the headwaters to about 60 km downstream, then gradually decreased over the next 40 km as the river approaches the Pacific Ocean. Despite the lack of fish migration barriers, juvenile coho are currently only observed in the downstream-most 20 km, whereas historically they were found in 90 km of river channel. Maximum daily temperatures and duration of elevated stream temperatures were not significantly different in the headwater and downstream reaches but were significantly higher in the 50 km long intervening reach, where maximum weekly maximum temperatures ranged from 23 to 27??C. An increase in stream temperatures in the middle basin during the last three decades as a result of channel aggradation, widening, and the removal of large riparian conifers may play an important role in restricting juvenile coho to one-fifth of their historical range. ?? 2006 NRC.

Canadian Journal of Fisheries and Aquatic Sciences↗
USGS2010

eMODIS: A User-Friendly Data Source

The U.S. Geological Survey's (USGS) Earth Resources Observation and Science (EROS) Center is generating a suite of products called 'eMODIS' based on Moderate Resolution Imaging Spectroradiometer (MODIS) data acquired by the National Aeronautics and Space Administration's (NASA) Earth Observing System (EOS). With a more frequent repeat cycle than Landsat and higher spatial resolutions than the Advanced Very High Resolution Spectroradiometer (AVHRR), MODIS is well suited for vegetation studies. For operational monitoring, however, the benefits of MODIS are counteracted by usability issues with the standard map projection, file format, composite interval, high-latitude 'bow-tie' effects, and production latency. eMODIS responds to a community-specific need for alternatively packaged MODIS data, addressing each of these factors for real-time monitoring and historical trend analysis. eMODIS processes calibrated radiance data (level-1B) acquired by the MODIS sensors on the EOS Terra and Aqua satellites by combining MODIS Land Science Collection 5 Atmospherically Corrected Surface Reflectance production code and USGS EROS MODIS Direct Broadcast System (DBS) software to create surface reflectance and Normalized Difference Vegetation Index (NDVI) products. eMODIS is produced over the continental United States and over Alaska extending into Canada to cover the Yukon River Basin. The 250-meter (m), 500-m, and 1,000-m products are delivered in Geostationary Earth Orbit Tagged Image File Format (Geo- TIFF) and composited in 7-day intervals. eMODIS composites are projected to non-Sinusoidal mapping grids that best suit the geography in their areas of application (see eMODIS Product Description below). For eMODIS products generated over the continental United States (eMODIS CONUS), the Terra (from 2000) and Aqua (from 2002) records are available and continue through present time. eMODIS CONUS also is generated in an expedited process that delivers a 7-day rolling composite, created daily with the most recent 7 days of acquisition, to users monitoring real-time vegetation conditions. eMODIS Alaska is not part of expedited processing, but does cover the Terra mission life (2000-present). A simple file transfer protocol (FTP) distribution site currently is enabled on the Internet for direct download of eMODIS products (ftp://emodisftp.cr.usgs.gov/eMODIS), with plans to expand into an interactive portal environment.

Open-File Report↗
USGS2016

The global Landsat archive: Status, consolidation, and direction

New and previously unimaginable Landsat applications have been fostered by a policy change in 2008 that made analysis-ready Landsat data free and open access. Since 1972, Landsat has been collecting images of the Earth, with the early years of the program constrained by onboard satellite and ground systems, as well as limitations across the range of required computing, networking, and storage capabilities. Rather than robust on-satellite storage for transmission via high bandwidth downlink to a centralized storage and distribution facility as with Landsat-8, a network of receiving stations, one operated by the U.S. government, the other operated by a community of International Cooperators (ICs), were utilized. ICs paid a fee for the right to receive and distribute Landsat data and over time, more Landsat data was held outside the archive of the United State Geological Survey (USGS) than was held inside, much of it unique. Recognizing the critical value of these data, the USGS began a Landsat Global Archive Consolidation (LGAC) initiative in 2010 to bring these data into a single, universally accessible, centralized global archive, housed at the Earth Resources Observation and Science (EROS) Center in Sioux Falls, South Dakota. The primary LGAC goals are to inventory the data held by ICs, acquire the data, and ingest and apply standard ground station processing to generate an L1T analysis-ready product. As of January 1, 2015 there were 5,532,454 images in the USGS archive. LGAC has contributed approximately 3.2 million of those images, more than doubling the original USGS archive holdings. Moreover, an additional 2.3 million images have been identified to date through the LGAC initiative and are in the process of being added to the archive. The impact of LGAC is significant and, in terms of images in the collection, analogous to that of having had two additional Landsat-5 missions. As a result of LGAC, there are regions of the globe that now have markedly improved Landsat data coverage, resulting in an enhanced capacity for mapping, monitoring change, and capturing historic conditions. Although future missions can be planned and implemented, the past cannot be revisited, underscoring the value and enhanced significance of historical Landsat data and the LGAC initiative. The aim of this paper is to report the current status of the global USGS Landsat archive, document the existing and anticipated contributions of LGAC to the archive, and characterize the current acquisitions of Landsat-7 and Landsat-8. Landsat-8 is adding data to the archive at an unprecedented rate as nearly all terrestrial images are now collected. We also offer key lessons learned so far from the LGAC initiative, plus insights regarding other critical elements of the Landsat program looking forward, such as acquisition, continuity, temporal revisit, and the importance of continuing to operationalize the Landsat program.

Remote Sensing of Environment↗
USGS1987

Physical properties of the surface materials at the Viking landing sites on Mars

This report summarizes the results of the Physical Properties Investigation of the Viking '75 Project, activities of the surface samplers, and relevant results from other investigations. The two Viking Landers operated for nearly four martian years after landing on July 20 (Lander 1) and Sept. 3 (Lander 2), 1976; Lander 1 acquired its last pictures on or about Nov. 5, 1982. Lander 1 rests on a smooth, cratered plain at the west edge of Chryse Planitia (22.5 ? N, 48.0? W), and Lander 2 rests 200 km west of the crater Mie in Utopia Planitia (48.0? N, 225.7? W). Lander 1 views showed that dune-like deposits of drift material were superposed on rock-strewn surfaces. Soil-like material from the rock-strewn areas was called blocky material. Lander 2 views also showed a rock-strewn surface. Polygonal to irregular features, etched by the wind, revealed crusty to cloddy material among rocks. Both landers descended to the surface along nearly vertical trajectories. Velocities at touchdown were about 2 m/s for both landers. Footpad 2 of Lander 1 penetrated drift material 0.165 m, and footpad 3 penetrated blocky material 0.036 m. The two visible footpads of Lander 2 struck rocks. Erosion by exhausts from the forward engines produced craters with rims of mixed fine-grained material and platy to equidimensional clods, crusts, and fragments. Comparison of engine-exhaust erosion on Mars with terrestrial data suggested that drift material behaved like a weakly cohesive material with a grain size less than 3-9 /-lm. Although not sand, blocky and crusty to cloddy materials eroded like sand-with grain sizes of 0.01 or 0.2 cm. The surface samplers accomplished an impressive number of tasks. All experiments that required samples received samples. Deep holes, as much as 0.22 m deep, were excavated by both landers. Lander 2 successfully pushed rocks and collected samples from areas originally beneath the rocks. Tasks specifically accomplished for the Physical Properties Investigation include: (1) acquiring motor-current data while excavating trenches, (2) performing surface-bearing tests, (3) performing backhoe touchdowns, (4) attempting to chip or scratch rocks, (5) comminuting samples, (6) measuring subsurface diurnal temperatures, and (7) constructing conical piles of materials on and among rocks. Sample trenches in the three major types of soil-like materials were different from one another. Trenches in drift material, which were typically 0.06 m deep, had steep walls along much of their lengths, lumpy tailings and floors, and smooth domed surfaces with sparse fine fractures around their tips. Trenches in blocky material, which were typically 0.03-0.04 m deep, had steep walls near their tips, and surfaces around their tips were displaced upward and some appeared blocky. Trenches in crusty to cloddy material, which were typically 0.04-0.05 m deep, had steep and often irregular slopes near their tips, clods and slabs of crust in their tailings, and disrupted areas around their tips composed of mixed fine-grained material and slabs of crust or thick polygonal clods that had been displaced upwards. Data acquired during landing, trenching, surface-bearing tests, backhoe touchdowns, and from other science experiments were used to determine the mechanical properties of drift, blocky, and crusty to cloddy materials. Drift material appeared to be very fine grained, with local planes of weakness; in general, the drift material was consistent with a material having an angle of internal friction about 18?, a cohesion ranging from 0.7 to 3.0 kPa, and a bulk density of 1,200 kg/m 3 . Blocky material was consistent with a material having an angle of internal friction about 30?, cohesions from 1.5 to 16 kPa, and a bulk density of 1,600 kg/m 3 . Crusty to cloddy material had variable properties. For chiefly crusty to cloddy material, angles of internal friction were about 35 ? , and cohesions were from 0.5 to 5.2 kPa. For mixed fines and crusts, a

Professional Paper↗
USGS2006

Proceedings of the U.S. Geological Survey Sixth Biennial Geographic Information Science Workshop, Denver, Colorado, April 24-28, 2006

The U.S. Geological Survey's (USGS) Sixth Biennial Geographic Information Science Workshop April 24 - 28, 2006, at the Denver Federal Center in Denver, Colorado, provides a unique opportunity for multi-disciplinary Geographic Information Systems (GIS) and associated scientific professionals to share, learn, present, and discuss a wide variety of geospatial-related topics. Information is exchanged through a series of plenary sessions, hands-on technical workshops, user and commercial vendor demonstrations, lecture and poster sessions, and specialty meetings. Workshop attendance is limited to Department of Interior (DOI) and USGS employees and contractors; however, plenary, hands-on, and lecture sessions have presenters from other Federal agencies, numerous commercial vendors, universities, and several consortia. Over 175 participants are expected to attend the Workshop. Several prominent speakers are featured at this Workshop. Monday evening Star Guest Speaker and National Aeronautics and Space Administration (NASA) Astronaut Captain Dominic Gorie will talk about his experiences as a veteran of three space flights and over 32 days in space, including the NASA Space Shuttle Radar Topography Mission that mapped more than 47 million miles of the Earth's land surface. Selected as an astronaut candidate by NASA in December 1994, Captain Gorie is currently Chief of the Astronaut Shuttle Branch. Monday evening also features a town hall meeting with Geographic Information Office (GIO) leaders Karen Siderelis, Kevin Gallagher, Bob Pierce, Steve Guptill, Mark DeMulder, John Mahoney, and Mark Negri, who will discuss changes and activities within the GIO in an open discussion format. Tuesday plenary sessions feature keynote speaker Dr. P. Patrick Leahy, Acting USGS Director. Dr. Leahy holds undergraduate and graduate degrees in geology (1968) and geophysics (1970) from Boston College. In 1979, he received his doctorate in geology from Rensselaer Polytechnic Institute, where he specialized in regional ground-water studies and hydraulics. Dr. Leahy has been with the USGS since 1974, and has held various technical and managerial positions, including Associate Director for Geology and Chief of the National Water-Quality Assessment (NAWQA) Program. Dr. Leahy will be discussing a broad range of topics including Bureau accomplishments, initiatives, and budgets. The purpose of this proceedings volume is to serve as an activity reference for Workshop attendees as well as an archive of technical abstracts submitted, presented, and discussed at the Workshop. Author, co-author, and presenter names, affiliations, and contact information are listed with presentation titles along with submitted abstracts. Some hands-on sessions are offered twice. In these instances, abstracts submitted for publication are presented in the proceedings on both days they are offered. All acronyms used in these proceedings are explained in the text of each abstract. The term 'ArcGIS' refers to an integrated collection of GIS software products produced by Environmental Systems Research Institute, Inc. (ESRI).

Scientific Investigations Report↗
USGS2013

Water resources and shale gas/oil production in the Appalachian Basin: critical issues and evolving developments

Unconventional natural gas and oil resources in the United States are important components of a national energy program. While the Nation seeks greater energy independence and greener sources of energy, Federal agencies with environmental responsibilities, state and local regulators and water-resource agencies, and citizens throughout areas of unconventional shale gas development have concerns about the environmental effects of high volume hydraulic fracturing (HVHF), including those in the Appalachian Basin in the northeastern United States (fig. 1). Environmental concerns posing critical challenges include the availability and use of surface water and groundwater for hydraulic fracturing; the migration of stray gas and potential effects on overlying aquifers; the potential for flowback, formation fluids, and other wastes to contaminate surface water and groundwater; and the effects from drill pads, roads, and pipeline infrastructure on land disturbance in small watersheds and headwater streams (U.S. Government Printing Office, 2012). Federal, state, regional and local agencies, along with the gas industry, are striving to use the best science and technology to develop these unconventional resources in an environmentally safe manner. Some of these concerns were addressed in U.S. Geological Survey (USGS) Fact Sheet 2009–3032 (Soeder and Kappel, 2009) about potential critical effects on water resources associated with the development of gas extraction from the Marcellus Shale of the Hamilton Group (Ver Straeten and others, 1994). Since that time, (1) the extraction process has evolved, (2) environmental awareness related to high-volume hydraulic fracturing process has increased, (3) state regulations concerning gas well drilling have been modified, and (4) the practices used by industry to obtain, transport, recover, treat, recycle, and ultimately dispose of the spent fluids and solid waste materials have evolved. This report updates and expands on Fact Sheet 2009–3032 and presents new information regarding selected aspects of unconventional shale gas development in the Appalachian Basin (primarily Virginia, West Virginia, Maryland, Pennsylvania, Ohio, and New York). This document was prepared by the USGS, in cooperation with the U.S. Department of Energy, and reviews the evolving technical advances and scientific studies made in the Appalachian Basin between 2009 and the present (2013), addressing past and current issues for oil and gas development in the region.

Maryl;New York;Ohio;Pennsylvania;Virginia;West Vir↗
USGS2005

Stream invertebrate community functional responses to deposited sediment

We investigated functional responses of benthic invertebrates to deposited sediment in four Missouri USA streams. In each stream, invertebrates were sampled along continuums of deposited sediment (particles <2 mm in size) from 0 to 100% surface cover in reaches of fairly homogeneous substrate composition, current velocity, and water depths. Correlations, graphical representations, and the cumulative response curves of feeding and habit groups provided strong empirical support for distinct community functional changes due to deposited sediment. Feeding groups were more sensitive to deposited sediment than habit groups. Densities of all the feeding groups decreased significantly with increasing deposited sediment, while relative densities of gatherers increased significantly. Taxa richness also decreased significantly for all the feeding groups except for the shredders. Increases in deposited sediment were related to significant density decreases for only the clingers and sprawlers in the habit group, resulting in significant increases in the relative densities of both burrowers and climbers. Clingers, sprawlers, and swimmers also showed significant decreases in taxa richness. ?? Eawag, 2005.

Aquatic Sciences↗
USGS2014

Behavior of bats at wind turbines

Wind turbines are causing unprecedented numbers of bat fatalities. Many fatalities involve tree-roosting bats, but reasons for this higher susceptibility remain unknown. To better understand behaviors associated with risk, we monitored bats at three experimentally manipulated wind turbines in Indiana, United States, from July 29 to October 1, 2012, using thermal cameras and other methods. We observed bats on 993 occasions and saw many behaviors, including close approaches, flight loops and dives, hovering, and chases. Most bats altered course toward turbines during observation. Based on these new observations, we tested the hypotheses that wind speed and blade rotation speed influenced the way that bats interacted with turbines. We found that bats were detected more frequently at lower wind speeds and typically approached turbines on the leeward (downwind) side. The proportion of leeward approaches increased with wind speed when blades were prevented from turning, yet decreased when blades could turn. Bats were observed more frequently at turbines on moonlit nights. Taken together, these observations suggest that bats may orient toward turbines by sensing air currents and using vision, and that air turbulence caused by fast-moving blades creates conditions that are less attractive to bats passing in close proximity. Tree bats may respond to streams of air flowing downwind from trees at night while searching for roosts, conspecifics, and nocturnal insect prey that could accumulate in such flows. Fatalities of tree bats at turbines may be the consequence of behaviors that evolved to provide selective advantages when elicited by tall trees, but are now maladaptive when elicited by wind turbines.

Indiana↗
USGS2019

Extreme coastal water level in Washington state: Guidance to support sea level rise planning

This document provides guidelines for assessing exposure to future coastal flooding during extreme coastal water level events – whether these are due to tides, surge, wave run-up, or, more likely, a combination of the three. These guidelines provide information about the current and future magnitude of extreme coastal water levels across Washington State and the underlying processes that influence them. This information is intended to be combined with sea level projections to assess future exposure to coastal flooding along Washington’s coastline. Although the results of our analyses can be combined with any available sea level projections, this report is intended as a companion to the localized sea level rise projections (Miller et al., 2018) developed as part of the Washington Coastal Resilience Project. The Washington Coastal Resilience Project was a three-year effort to rapidly increase the state’s capacity to prepare for sea level rise. The project aimed to improve risk projections, provide better guidelines for land use planners and strengthen capital investment programs for coastal restoration and infrastructure. Partners in the Washington Coastal Resilience Project included Washington Sea Grant, Washington Department of Ecology, Island County, King County, NOAA Office for Coastal Management, Pacific Northwest National Laboratory, Padilla Bay National Estuary Research Reserve, The City of Tacoma, The Nature Conservancy, U.S. Geological Survey, University of Oregon, University of Washington Climate Impacts Group, University of Washington Department of Earth and Space Sciences, Washington Department of Fish and Wildlife and Western Washington University. The 2018 sea level projections are described in an accompanying technical report, along with a review of the science related to sea level rise (Miller et al., 2018). The report and all associated supporting information are available on the Washington Coastal Hazards Resilience Network website (http://www.wacoastalnetwork.com/).

Washington↗
USGS2008

Use of complex hydraulic variables to predict the distribution and density of unionids in a side channel of the Upper Mississippi River

Previous attempts to predict the importance of abiotic and biotic factors to unionids in large rivers have been largely unsuccessful. Many simple physical habitat descriptors (e.g., current velocity, substrate particle size, and water depth) have limited ability to predict unionid density. However, more recent studies have found that complex hydraulic variables (e.g., shear velocity, boundary shear stress, and Reynolds number) may be more useful predictors of unionid density. We performed a retrospective analysis with unionid density, current velocity, and substrate particle size data from 1987 to 1988 in a 6-km reach of the Upper Mississippi River near Prairie du Chien, Wisconsin. We used these data to model simple and complex hydraulic variables under low and high flow conditions. We then used classification and regression tree analysis to examine the relationships between hydraulic variables and unionid density. We found that boundary Reynolds number, Froude number, boundary shear stress, and grain size were the best predictors of density. Models with complex hydraulic variables were a substantial improvement over previously published discriminant models and correctly classified 65-88% of the observations for the total mussel fauna and six species. These data suggest that unionid beds may be constrained by threshold limits at both ends of the flow regime. Under low flow, mussels may require a minimum hydraulic variable (Rez.ast;, Fr) to transport nutrients, oxygen, and waste products. Under high flow, areas with relatively low boundary shear stress may provide a hydraulic refuge for mussels. Data on hydraulic preferences and identification of other conditions that constitute unionid habitat are needed to help restore and enhance habitats for unionids in rivers. ?? 2008 Springer Science+Business Media B.V.

Hydrobiologia↗
USGS2008

Density currents in the Chicago River: Characterization, effects on water quality, and potential sources

Bidirectional flows in a river system can occur under stratified flow conditions and in addition to creating significant errors in discharge estimates, the upstream propagating currents are capable of transporting contaminants and affecting water quality. Detailed field observations of bidirectional flows were made in the Chicago River in Chicago, Illinois in the winter of 2005-06. Using multiple acoustic Doppler current profilers simultaneously with a water-quality profiler, the formation of upstream propagating density currents within the Chicago River both as an underflow and an overflow was observed on three occasions. Density differences driving the flow primarily arise from salinity differences between intersecting branches of the Chicago River, whereas water temperature is secondary in the creation of these currents. Deicing salts appear to be the primary source of salinity in the North Branch of the Chicago River, entering the waterway through direct runoff and effluent from a wastewater-treatment plant in a large metropolitan area primarily served by combined sewers. Water-quality assessments of the Chicago River may underestimate (or overestimate) the impairment of the river because standard water-quality monitoring practices do not account for density-driven underflows (or overflows). Chloride concentrations near the riverbed can significantly exceed concentrations at the river surface during underflows indicating that full-depth parameter profiles are necessary for accurate water-quality assessments in urban environments where application of deicing salt is common.

Science of the Total Environment↗
USGS2016

Urbanization and stream ecology: Diverse mechanisms of change

The field of urban stream ecology has evolved rapidly in the last 3 decades, and it now includes natural scientists from numerous disciplines working with social scientists, landscape planners and designers, and land and water managers to address complex, socioecological problems that have manifested in urban landscapes. Over the last decade, stream ecologists have met 3 times at the Symposium on Urbanization and Stream Ecology (SUSE) to discuss current research, identify knowledge gaps, and promote future research collaborations. The papers in this special series on urbanization and stream ecology include both primary research studies and conceptual synthesis papers spurred from discussions at SUSE in May 2014. The themes of the meeting are reflected in the papers in this series emphasizing global differences in mechanisms and responses of stream ecosystems to urbanization and management solutions in diverse urban streams. Our hope is that this series will encourage continued interdisciplinary and collaborative research to increase the global understanding of urban stream ecology toward stream protection and restoration in urban landscapes.

Freshwater Science↗