USGS Science⌕ Search

SEARCH · USGS Science

Results for “The Earth Observer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70Linked to original sources

Calving seismicity from iceberg-sea surface interactions

Iceberg calving is known to release substantial seismic energy, but little is known about the specific mechanisms that produce calving icequakes. At Yahtse Glacier, a tidewater glacier on the Gulf of Alaska, we draw upon a local network of seismometers and focus on 80 hours of concurrent, direct observation of the terminus to show that calving is the dominant source of seismicity. To elucidate seismogenic mechanisms, we synchronized video and seismograms to reveal that the majority of seismic energy is produced during iceberg interactions with the sea surface. Icequake peak amplitudes coincide with the emergence of high velocity jets of water and ice from the fjord after the complete submergence of falling icebergs below sea level. These icequakes have dominant frequencies between 1 and 3 Hz. Detachment of an iceberg from the terminus produces comparatively weak seismic waves at frequencies between 5 and 20 Hz. Our observations allow us to suggest that the most powerful sources of calving icequakes at Yahtse Glacier include iceberg-sea surface impact, deceleration under the influence of drag and buoyancy, and cavitation. Numerical simulations of seismogenesis during iceberg-sea surface interactions support our observational evidence. Our new understanding of iceberg-sea surface interactions allows us to reattribute the sources of calving seismicity identified in earlier studies and offer guidance for the future use of seismology in monitoring iceberg calving.

Journal of Geophysical Research F: Earth Surface↗

Submarine landslides in the Santa Barbara Channel as potential tsunami sources

Recent investigations using the Monterey Bay Aquarium Research Institutes (MBARI) Remotely Operated Vehicles (ROVs) "Ventana" and "Tiburon" and interpretation of MBARI's EM 300 30 kHz multibeam bathymetric data show that the northern flank of the Santa Barbara Basin has experienced massive slope failures. Of particular concern is the large (130 km2) Goleta landslide complex located off Coal Oil Point near the town of Goleta, that measures 14.6-km long extending from a depth of 90 m to nearly 574 m deep and is 10.5 km wide. We estimate that approximately 1.75 km3 has been displaced by this slide during the Holocene. This feature is a complex compound submarine landslide that contains both surfical slump blocks and mud flows in three distinct segments. Each segment is composed of a distinct head scarp, down-dropped head block and a slide debris lobe. The debris lobes exhibit hummocky topography in the central areas that appear to result from compression during down slope movement. The toes of the western and eastern lobes are well defined in the multibeam image, whereas the toe of the central lobe is less distinct. Continuous seismic reflection profiles show that many buried slide debris lobes exist and comparison of the deformed reflectors with ODP Drill Site 149, Hole 893 suggest that at least 200 000 years of failure have occurred in the area (Fisher et al., 2005a). Based on our interpretation of the multibeam bathymetry and seismic reflection profiles we modeled the potential tsunami that may have been produced from one of the three surfical lobes of the Goleta slide. This model shows that a 10 m high wave could have run ashore along the cliffs of the Goleta shoreline. Several other smaller (2 km2 and 4 km2) slides are located on the northern flank of the Santa Barbara Basin, both to the west and east of Goleta slide and on the Concepcion fan along the western flank of the basin. One slide, named the Gaviota slide, is 3.8 km2, 2.6 km long and 1.7 km wide. A distinct narrow scar extends from near the eastern head wall of this slide for over 2 km eastward toward the Goleta slide and may represent either an incipient failure or a remnant of a previous failure. Push cores collected within the main head scar of this slide consisted of hydrogen sulfide bearing mud, possibly suggesting active fluid seepage and a vibra-core penetrated ???50 cm of recent sediment overlying colluvium or landslide debris confirming the age of ???300 years as proposed by Lee et al. (2004). However, no seeps or indications of recent movement were observed during our ROV investigation within this narrow head scar indicating that seafloor in the scar is draped with mud. ?? 2006 Author(s). This work is licensed under a Creative Commons License.

Natural Hazards and Earth System Sciences↗

Isotope geochemistry of mercury in source rocks, mineral deposits and spring deposits of the California Coast Ranges, USA

We present here the first study of the isotopic composition of mercury in rocks, ore deposits, and active spring deposits from the California Coast Ranges, a part of Earth's crust with unusually extensive evidence of mercury mobility and enrichment. The Franciscan Complex and Great Valley Sequence, which form the bedrock in the California Coast Ranges, are intruded and overlain by Tertiary volcanic rocks including the Clear Lake Volcanic Sequence. These rocks contain two types of mercury deposits, hot-spring deposits that form at shallow depths (< 300??m) and silica-carbonate deposits that extend to depths of 1000??m. Active springs and geothermal areas continue to precipitate Hg and Au and are modern analogues to the fossil hydrothermal systems preserved in the ore deposits. The Franciscan Complex and Great Valley Sequence contain clastic sedimentary rocks with higher concentrations of mercury than volcanic rocks of the Clear Lake Volcanic Field. Mean mercury isotopic compositions (??202Hg) for all three rock units are similar, although the range of values in Franciscan Complex rocks is greater than in either Great Valley or Clear Lake rocks. Hot spring and silica-carbonate mercury deposits have similar average mercury isotopic compositions that are indistinguishable from averages for the three rock units, although ??202Hg values for the mercury deposits have a greater variance than the country rocks. Precipitates from spring and geothermal waters in the area have similarly large variance and a mean ??202Hg value that is significantly lower than the ore deposits and rocks. These observations indicate that there is little or no isotopic fractionation (< ?? 0.5???) during release of mercury from its source rocks into hydrothermal solutions. Isotopic fractionation does appear to take place during transport and concentration of mercury in deposits, however, especially in their uppermost parts. Boiling of hydrothermal fluids, separation of a mercury-bearing CO2 vapor or reduction and volatilization of Hg(0) in the near-surface environment are likely the most important processes causing the observed Hg isotope fractionation. This should result in the release of mercury with low ??202Hg values into the atmosphere from the top of these hydrothermal systems. Estimates of mass balance suggest that residual Hg reservoirs are not measurably enriched in heavy Hg isotopes as a result of this process because only a small amount of Hg (< 4%) leaves actively ore-forming systems. ?? 2008 Elsevier B.V. All rights reserved.

Earth and Planetary Science Letters↗

Origins of high-frequency scattered waves near PKKP from large aperture seismic array data

This article identifies the likely origin of 1-Hz scattered waves in the vicinity of PKKP by comparing measurements of slowness and onset time to ray-theoretical predictions. The measurements are obtained from slant stacks of Large Aperture Seismic Array (LASA) data from 36 earthquakes and six explosions in the range 30??-116??. Three types of scattered waves explain the main features seen in the stacks, including: P scattered to PKP near the Earth's surface (P.PKP), PKKP scattered near its core-mantle-boundary (CMB) reflection point (PK.KP), and SKKP scattered near its CMB reflection point (SK.KP). The LASA stacks image the amplitude and slowness variations of the scattered waves with time. They also show where these waves can be detected and where they are free from contaminating arrivals. SK.KP waves rise above the noise approximately 100 sec before the onset time of the main SKKP arrival near 113??. Observations of PK.KP span 30??-100??. However, at distances greater than 50?? they suffer from P.PKP contamination. At distances less than 40?? the PK.KP last for about 280 sec. This is approximately 130 sec longer than the maximum ray-theoretical prediction for waves scattered at the CMB, indicating a possible combination of near-surface scattering and contributions from the overlying mantle.

Bulletin of the Seismological Society of America↗

Preliminary photointerpretation map of landslide and other surficial deposits of the Mount Hamilton quadrangle and parts of the Mount Boardman and San Jose quadrangles, Alameda and Santa Clara Counties, California

The nine San Francisco Bay region counties lie within a geologically active, young, and dynamic part of the central and northern Coast Ranges of California. Significant movements of the earth's crust are occurring here at the present time, posing numerous problems to urbanization, including some of special concern. Geological processes such as fault movements, earthquakes, land subsidence, landsliding, slow downslope movement of bedrock and surficial materials, coastal and stream erosion, flooding, and sedimentation are all potentially hazardous. Because of these factors, an understanding of the operation of physical processes in the bay region is desirable for harmonious, efficient, and safe land-use planning, particularly now, with greatly expanded pressures for urban growth. This map presents preliminary information about one aspect of the physical environment necessary to sound land-use planning--the nature and distribution of surficial deposits. Because surficial deposits are common and well developed in much of the bay region, it is useful to know how and why they have formed, as well as what properties they possess. When maps like this are used in combination with other types of environmental information, such as data on soils, bedrock geology, slopes, vegetation, climatic variation, seismic response, and hydrology, it should be easier to arrive at sound decisions regarding the physical aspects of land use. The U.S. Geological Survey is studying many of these factors in the bay region and hopes to provide the community with much of the required information as part of its San Francisco Bay Region Study in cooperation with the Department of Housing and Urban Development. The representation of surficial deposits on this map reflects the way in which a geologist, working exclusively with aerial photographs, interpreted the origin of various elements of the present landscape. The deposits shown here have not been examined in the field. However, by viewing overlapping vertical aerial photographs through a stereoscope, the geologist sees a three-dimensional relief model of the ground surface and can study and interpret the origins of landforms with considerable ease. In fact, for mapping surficial deposits, particularly in reconnaissance-type studies, photointerpretation has advantages over both ground observations and laboratory studies of surficial materials. Of course, better information can be provided when all aspects of the study are integrated. These preliminary photointerpretation maps are only the first stage in a detailed study of surficial deposits in the bay region, but they should provide land-use planners with immediately useful information about the regional distribution of landslide and other surficial deposits. This map indicates the dominant surficial processes that have probably been operative by showing the distribution of different types of surficial deposits. Processes such as weathering, erosion, sedimentation, and the slow as well as rapid downslope movement of earth materials have constantly reshaped the land surface in the past and will continue to in the future, although at varying rates. The processes are interrelated to varying degrees. For example, crustal uplift of the Coast Ranges will lead to increased erosion and downcutting by streams that in turn generally results in increased deposition of sediments in river valleys, lakes, and shoreline areas. Older flood planes and river deposits may be eroded, leaving elevated terrace deposits. In addition, downcutting by streams may cause adjacent slopes to become unstable, thereby increasing the possibility of slope failures. Man's activities can alter natural physical processes in many ways. Simple acts such as overwatering a lawn or placing a septic tank drainfield in ground that is marginally stable may weaken the bedrock and surficial materials enough to induce landsliding. Relatively stable areas may be made unstable as a result of construction activities that involve cutting or oversteepening of natural slopes. Engineers, builders, conservationists, and others concerned with land use must evaluate the potential effects of all types of development, and maps that show the nature and distribution of surficial deposits should provide much of the basic information they need. This map, then, shows the cumulative effects of various processes that have yielded surficial deposits up to the time the photographs used for photointerpretation were taken. It does not indicate directly areas where processes will be most active, nor does it show the rate at which they will operate. However, knowledge of the history of geologic events is a key to understanding and predicting the evolution of an area, even where man's activities significantly change the character of the land. Almost all new landslides, for example, occur in areas with a history of landslide activity.

California↗

The Palos Verdes Fault offshore southern California: late Pleistocene to present tectonic geomorphology, seascape evolution and slip rate estimate based on AUV and ROV surveys

The Palos Verdes Fault (PVF) is one of few active faults in Southern California that crosses the shoreline and can be studied using both terrestrial and subaqueous methodologies. To characterize the near-seafloor fault morphology, tectonic influences on continental slope sedimentary processes and late Pleistocene to present slip rate, a grid of high-resolution multibeam bathymetric data, and chirp subbottom profiles were acquired with an autonomous underwater vehicle (AUV) along the main trace of PVF in water depths between 250 and 600&thinsp;m. Radiocarbon dates were obtained from vibracores collected using a remotely operated vehicle (ROV) and ship-based gravity cores. The PVF is expressed as a well-defined seafloor lineation marked by subtle along-strike bends. Right-stepping transtensional bends exert first-order control on sediment flow dynamics and the spatial distribution of Holocene depocenters; deformed strata within a small pull-apart basin record punctuated growth faulting associated with at least three Holocene surface ruptures. An upper (shallower) landslide scarp, a buried sedimentary mound, and a deeper scarp have been right-laterally offset across the PVF by 55&thinsp;&plusmn;&thinsp;5, 52&thinsp;&plusmn;&thinsp;4&thinsp;, and 39&thinsp;&plusmn;&thinsp;8 m, respectively. The ages of the upper scarp and buried mound are approximately 31&thinsp;ka; the age of the deeper scarp is bracketed to 17&ndash;24&thinsp;ka. These three piercing points bracket the late Pleistocene to present slip rate to 1.3&ndash;2.8&thinsp;mm/yr and provide a best estimate of 1.6&ndash;1.9&thinsp;mm/yr. The deformation observed along the PVF is characteristic of strike-slip faulting and accounts for 20&ndash;30% of the total right-lateral slip budget accommodated offshore Southern California.

California↗

Measuring gravel transport and dispersion in a mountain river using passive radio tracers

Random walk models of fluvial sediment transport recognize that grains move intermittently, with short duration steps separated by rests that are comparatively long. These models are built upon the probability distributions of the step length and the resting time. Motivated by these models, tracer experiments have attempted to measure directly the steps and rests of sediment grains in natural streams. This paper describes results from a large tracer experiment designed to test stochastic transport models. We used passive integrated transponder (PIT) tags to label 893 coarse gravel clasts and placed them in Halfmoon Creek, a small alpine stream near Leadville, Colorado, USA. The PIT tags allow us to locate and identify tracers without picking them up or digging them out of the streambed. They also enable us to find a very high percentage of our rocks, 98% after three years and 96% after the fourth year. We use the annual tracer displacement to test two stochastic transport models, the Einstein–Hubbell–Sayre (EHS) model and the Yang–Sayre gamma-exponential model (GEM). We find that the GEM is a better fit to the observations, particularly for slower moving tracers and suggest that the strength of the GEM is that the gamma distribution of step lengths approximates a compound Poisson distribution. Published in 2012. This article is a US Government work and is in the public domain in the USA.

Earth Surface Processes and Landforms↗

Chromium, chromium isotopes and selected trace elements, western Mojave Desert, USA

Chromium(VI) concentrations in excess of the California Maximum Contaminant Level (MCL) of 50 μg/L occur naturally in alkaline, oxic ground-water in alluvial aquifers in the western Mojave Desert, southern California. The highest concentrations were measured in aquifers eroded from mafic rock, but Cr(VI) as high as 27 μg/L was measured in aquifers eroded from granitic rock. Chromium(VI) concentrations did not exceed 5 μg/L at pH < 7.5 regardless of geology. δ 53 Cr values in native ground-water ranged from 0.7 to 5.1‰ and values were fractionated relative to the average δ 53 Cr composition of 0‰ in the earth’s crust. Positive δ 53 Cr values of 1.2 and 2.3‰ were measured in ground-water recharge areas having low Cr concentrations, consistent with the addition of Cr(VI) that was fractionated on mineral surfaces prior to entering solution. δ 53 Cr values, although variable, did not consistently increase or decrease with increasing Cr concentrations as ground-water flowed down gradient through more oxic portions of the aquifer. However, increasing δ 53 Cr values were observed as dissolved O 2 concentrations decreased, and Cr(VI) was reduced to Cr(III), and subsequently removed from solution. As a result, the highest δ 53 Cr values were measured in water from deep wells, and wells in discharge areas near dry lakes at the downgradient end of long flow paths through alluvial aquifers. δ 53 Cr values at an industrial site overlying mafic alluvium having high natural background Cr(VI) concentrations ranged from −0.1 to 3.2‰. Near zero δ 53 Cr values at the site were the result of anthropogenic Cr. However, mixing with native ground-water and fractionation of Cr within the plume increased δ 53 Cr values at the site. Although δ 53 Cr was not necessarily diagnostic of anthropogenic Cr, it was possible to identify the extent of anthropogenic Cr at the site on the basis of the δ 53 Cr values in conjunction with major-ion data, and the δ 18 O and δD composition of water from wells.

Applied Geochemistry↗

Heat wave brings an unprecedented red tide to San Francisco Bay

An exceptional red tide in San Francisco Bay was observed on 8 September 2004. The red tide had chlorophyll concentrations approaching 200 mg/m 3 (Figure 1) in red/purple surface streaks containing high abundances of the dinoflagellate Akashiwo sanguinea. Red tides and harmful algal blooms (HABs) are common features of coastal ecosystems, and their growing frequency is a suspected outcome of coastal eutrophication. However, the authors have never observed a dinoflagellate bloom of this scale during 28 years of sampling in the nutrient-rich San Francisco Bay. Phytoplankton biomass along this transect is typically <5mg Chla/m 3 , and has never exceeded 21 mg Chla/m 3 during summer-autumn.

California↗

Structure of the California Coast Ranges and San Andreas Fault at SAFOD from seismic waveform inversion and reflection imaging

[1] A seismic reflection and refraction survey across the San Andreas Fault (SAF) near Parkfield provides a detailed characterization of crustal structure across the location of the San Andreas Fault Observatory at Depth (SAFOD). Steep-dip prestack migration and frequency domain acoustic waveform tomography were applied to obtain highly resolved images of the upper 5 km of the crust for 15 km on either side of the SAF. The resulting velocity model constrains the top of the Salinian granite with great detail. Steep-dip reflection seismic images show several strong-amplitude vertical reflectors in the uppermost crust near SAFOD that define an ∼2-km-wide zone comprising the main SAF and two or more local faults. Another prominent subvertical reflector at 2–4 km depth ∼9 km to the northeast of the SAF marks the boundary between the Franciscan terrane and the Great Valley Sequence. A deep seismic section of low resolution shows several reflectors in the Salinian crust west of the SAF. Two horizontal reflectors around 10 km depth correlate with strains of seismicity observed along-strike of the SAF. They represent midcrustal shear zones partially decoupling the ductile lower crust from the brittle upper crust. The deepest reflections from ∼25 km depth are interpreted as crust-mantle boundary.

Journal of Geophysical Research B: Solid Earth↗

Monitoring gas emissions can help forecast volcanic eruptions

As magma ascends in active volcanoes, dissolved volatiles partition from melt into a gas phase, rise, and are released into the atmosphere from volcanic vents. The major components of high-temperature volcanic gas are typically water vapor, carbon dioxide, and sulfur dioxide. Volcanologists have long recognized that measuring the chemical composition and emission rates of these discharged volatiles can help them understand the physical and chemical processes occurring within volcanic systems. However, in the past, continuous monitoring of gas emissions has been difficult because of the remote locations of many active volcanoes and the harsh environmental conditions at these sites. In late April, 40 scientists collaborating in the Network for Observation of Volcanic and Atmospheric Change (NOVAC) gathered for the first time in 5 years. The meeting, held on Turrialba Volcano in Costa Rica, was intended to provide a platform for the exchange of experiences with NOVAC instrumentation, spectral evaluation, and data interpretation.

Eos, Earth and Space Science News↗

Fitting jet noise similarity spectra to volcano infrasound data

Infrasound (low-frequency acoustic waves) has proven useful to detect and characterize subaerial volcanic activity, but understanding the infrasonic source during sustained eruptions is still an area of active research. Preliminary comparison between acoustic eruption spectra and the jet noise similarity spectra suggests that volcanoes can produce an infrasonic form of jet noise from turbulence. The jet noise similarity spectra, empirically derived from audible laboratory jets, consist of two noise sources: large-scale turbulence (LST) and fine-scale turbulence (FST). We fit the similarity spectra quantitatively to eruptions of Mount St. Helens in 2005, Tungurahua in 2006, and Kīlauea in 2018 using nonlinear least squares fitting. By fitting over a wide infrasonic frequency band (0.05–10 Hz) and restricting the peak frequency above 0.15 Hz, we observe a better fit during times of eruption versus non-eruptive background noise. Fitting smaller overlapping frequency bands highlights changes in the fit of LST and FST spectra, which aligns with observed changes in eruption dynamics. Our results indicate that future quantitative spectral fitting of eruption data will help identify changes in eruption source parameters such as velocity, jet diameter, and ash content which are critical for effective hazard monitoring and response.

Earth and Space Science↗

Warming-driven erosion and sediment transport in cold regions

Rapid atmospheric warming since the mid-twentieth century has increased temperature-dependent erosion and sediment-transport processes in cold environments, affecting food, energy and water security. In this Review, we summarize landscape changes in cold environments and provide a global inventory of increases in erosion and sediment yield driven by cryosphere degradation. Anthropogenic climate change, deglaciation, and thermokarst disturbances are causing increased sediment mobilization and transport processes in glacierized and periglacierized basins. With continuous cryosphere degradation, sediment transport will continue to increase until reaching a maximum (peak sediment). Thereafter, transport is likely to shift from a temperature-dependent regime toward a rainfall-dependent regime roughly between 2100–2200. The timing of the regime shift would be regulated by changes in meltwater, erosive rainfall and landscape erodibility, and complicated by geomorphic feedbacks and connectivity. Further progress in integrating multisource sediment observations, developing physics-based sediment-transport models, and enhancing interdisciplinary and international scientific collaboration is needed to predict sediment dynamics in a warming world.

Nature--Reviews of Earth and Environment↗

Red-Sea rift magmatism near Al Lith, Kingdom of Saudi Arabia

A newly recognized Tertiary dike complex and comagmatic volcanic rocks exposed on the central Saudi Arabian coastal plain record early stages of magmatism related to Red Sea rifting. Intrusive and stratigraphic relationships, and new potassium-argon dating indicate episodic magmatism from about 30 Ma to the present. Additional stratigraphic and radiometric evidence suggests that limited rift-related magmatism may have began as early as about 50 Ma ago. An early phase of crustal extension in the region was accompanied by faulting and graben formation and by dike-swarm intrusion. The style of extension and intrusion changed approximately 20 Ma ago. Localized volcanism and sheeted dike injection ceased and were replaced by the intrusion of thick gabbro dikes. This change may mark the onset of sea-floor spreading in the central Red Sea. The dikes and volcanic rocks consist of a bimodal mafic-felsic suite with transitional subalkaline to alkaline chemistry. Although no unique petrogenetic model can be developed for the suite, the following observations and conclusions are apparent from the available reconnaissance geochemistry: 1) Strontium isotopic initial ratios overlap in the range 0.7031 to 0.7047 and are not clearly related to alkalinity or silica content. Therefore, the bimodality and alkalinity of the suite are not products of contamination by the radiogenic Precambrian upper-crustal granitic rocks exposed in the region. 2) Several of the evolved rocks (rhyolites and comendite) show large to extreme negative europium anomalies and heavy rare-earth element (HREE) enrichment, features that cannot be explained by low-pressure crystal fractionation of potential parent magmas. An intriguing possibility is that HREE enrichments and large negative Eu anomalies of some peraluminous rhyolites (and granites) may result from the complete melting of garnet from middle or lower crustal rocks. 3) Most of the basalts are light rare-earth element (LREE)-enriched, consistent with derivation from fertile mantle in a continental-rift setting, however, interaction of the mafic melts with lower continental crust cannot be ruled out. A model of poly-baric mantle-melt derivation, producing several alkalinesubalkaline cycles, best explains magmatism in the Red Sea region. Differences in the depths and dynamics of mantle-melt extraction and transport brought about through changes in crust and mantle structure as the rift and paar developed may account for the transition from mixed alkaline-subalkaline bimodal magmatism of the pre-20 Ma rift basin to exclusively subalkaline (tholeiitic) magmatism at the Red Sea spreading axis and to predominantly alkali basalt volcanism within the Arabian Shield.

Open-File Report↗

Populations and home range relationships of the box turtle, Terrapene carolina (Linnaeus)

A population study of Terrapene carolina (Linnaeus) was made at the Patuxent Research Refuge, Maryland, from 1944 to 1947. A thirty acre area in bottomland forest was selected for intensive study. Turtles were marked by filing notches in marginal scutes according to a code. Turtles make extensive use of brushy shelter during the day as well.as at night. Gully banks and woods openings are used for sunning. Nights are usually spent in a 'form,' constructed by the turtle in leaves, debris, or earth. A form may be used once or it may be used repeatedly by the same or different turtles. Weather conditions most favorable to turtle activity are high humidity, warm sunny days, and frequent rains. Periods of activity are alternated with periods of quiet, even in favorable weather. There is no evidence for territorialism. Ranges of turtles of all ages and both sexes overlap grossly. Turtles are frequently found near each other but no antagonistic behavior has been observed. Adult turtles occupy specific home ranges which they maintain from year to year. Turtles retained their ranges even though a flood that completely covered the study area. Maximum home range diameters were determined by measurements of the mapped ranges of individual turtles. There was no significant difference between sizes of male and female ranges: males 33O+ 26 feet, females 37O+29 feet. A trail-laying device was used in following travel routes for 456 turtle days. Normal movements within the home range are characterized by (1) turns, doublings, detours, and criss-crossing paths, (2) interspersion of fairly direct traverses of the home range, (3) frequently repeated travels over certain routes. Maximum limits of the home range are ordinarily reached within a few days or weeks, although some turtles cover only one portion of the range at a time. Some turtles have two home ranges. One of these turtles was followed with a trailer for 161 days in 1946 and 1947. Trips outside the home range are made by females for egg laying. Trips of unexplained nature are made by both males and females. Turtles from other areas are occasional transients through the study plot. Standardized census trips provided data for estimating the size of the population. Census data were taken after females had returned from egg laying. The samples were spaced at intervals of a week or more to allow free movement of turtles over their ranges and assure more nearly equal availability of all turtles. These standard samples were compared by a collection ratio. Assumptions involved in the use of this ratio are discussed. Correction factors were applied to make allowance for turtles whose ranges.were partly inside and partly outside the study area, and for transient turtles. A second estimate, on the basis of the entire season's collecting, gave closely comparable results. The population of the study area is estimated to be between four and five turtles per acre, with juveniles constituting less than ten per cent of the total.

Dissertation Abstracts International↗

Petrology and age of volcanic-arc rocks from the continental margin of the Bering Sea: Implications for Early Eocene relocation of plate boundaries

Eocene volcanic flow and dike rocks from the Beringian margin have arc characteristics, implying a convergent history for this region during the early Tertiary. The extrusive rocks are basalt, basaltic andesite, andesite, and minor dacite and rhyolite. The intrusive sample is from a quartz diorite dike intruding serpentinized peridotite. Major-element oxide contents, particularly FeO*/MgO versus SiO 2 , identify both tholeiitic and calc-alkalic basalt; more silicic lavas have calc-alkalic affinities. Consistent with volcanic-arc compositions, spidergrams show pronounced Nb–Ta depletion and alkali enrichment relative to light-rare-earth-element ( LREE ) abundance. Chondrite-normalized REE plots show relatively flat patterns, with only slight LREE enrichment for tholeiitic compositions and greater LREE enrichment and lower heavy-rare-earth-element ( HREE ) abundance for calc-alkalic compositions. The samples, particularly those with calc-alkalic compositions, are rich in plagioclase that is strongly zoned; the more silicic samples contain orthopyroxene, clinopyroxene, and primary amphibole. The quartz diorite dike contains iron-rich almandine phenocrysts that appear to be magmatic, suggesting emplacement at great depth near the base of the crust or upper mantle.Chemical and mineralogical compositions are similar to those of modern Aleutian-arc lavas. They also resemble volcanic-arc compositions from western mainland Alaska, although greater chemical diversity and a stronger continental influence are observed in the Alaskan mainland rocks.Early Eocene ages of 54.4–50.2 Ma for the Beringian samples are well constrained by conventional K–Ar ages of nine plagioclase separates and by concordant 40 Ar/ 39 Ar incremental heating and total-fusion experiments. A concordant U–Pb zircon age of 53 Ma for the quartz-diorite dike is in good agreement with the K–Ar data.Plate motion studies of the North Pacific Ocean indicate more northerly directed subduction prior to the Tertiary and a continuous belt of arc-type volcanism extending from Siberia, along the Beringian margin, into mainland Alaska. Around 56 Ma (chron 25–24), subduction changed to a more westerly direction and subduction-related volcanism ceased for most of mainland Alaska. The increasingly oblique angle of convergence should have ended subduction along the Beringian margin as well. However, consistent ages of 54–50 Ma indicate a final pulse in arc-type magmatism during this period of plate adjustment, which may be explained by three different models: (1) The northern and central part of the Beringian margin maintained a higher angle of convergence, allowing a final pulse of arc-type magmatism. (2) The rocks erupted in an early, or proto, Aleutian arc and were rafted against the continental margin along transform faults. (3) The rocks erupted along a leaky transform fault, analogous to calc-alkalic volcanism in the southern California borderland.

Alaska↗

Triggered creep as a possible mechanism for delayed dynamic triggering of tremor and earthquakes

The passage of radiating seismic waves generates transient stresses in the Earth’s crust that can trigger slip on faults far away from the original earthquake source. The triggered fault slip is detectable in the form of earthquakes and seismic tremor . However, the significance of these triggered events remains controversial , in part because they often occur with some delay, long after the triggering stress has passed. Here we scrutinize the location and timing of tremor on the San Andreas fault between 2001 and 2010 in relation to distant earthquakes. We observe tremor on the San Andreas fault that is initiated by passing seismic waves, yet migrates along the fault at a much slower velocity than the radiating seismic waves. We suggest that the migrating tremor records triggered slow slip of the San Andreas fault as a propagating creep event. We find that the triggered tremor and fault creep can be initiated by distant earthquakes as small as magnitude 5.4 and can persist for several days after the seismic waves have passed. Our observations of prolonged tremor activity provide a clear example of the delayed dynamic triggering of seismic events. Fault creep has been shown to trigger earthquakes and we therefore suggest that the dynamic triggering of prolonged fault creep could provide a mechanism for the delayed triggering of earthquakes.

California↗

Unforeseen plant phenotypic diversity in a dry and grazed world

Earth harbours an extraordinary plant phenotypic diversity 1 that is at risk from ongoing global changes 2 , 3 . However, it remains unknown how increasing aridity and livestock grazing pressure—two major drivers of global change 4 , 5 , 6 —shape the trait covariation that underlies plant phenotypic diversity 1 , 7 . Here we assessed how covariation among 20 chemical and morphological traits responds to aridity and grazing pressure within global drylands. Our analysis involved 133,769 trait measurements spanning 1,347 observations of 301 perennial plant species surveyed across 326 plots from 6 continents. Crossing an aridity threshold of approximately 0.7 (close to the transition between semi-arid and arid zones) led to an unexpected 88% increase in trait diversity. This threshold appeared in the presence of grazers, and moved toward lower aridity levels with increasing grazing pressure. Moreover, 57% of observed trait diversity occurred only in the most arid and grazed drylands, highlighting the phenotypic uniqueness of these extreme environments. Our work indicates that drylands act as a global reservoir of plant phenotypic diversity and challenge the pervasive view that harsh environmental conditions reduce plant trait diversity 8 , 9 , 10 . They also highlight that many alternative strategies may enable plants to cope with increases in environmental stress induced by climate change and land-use intensification.

Nature↗