USGS Science⌕ Search

SEARCH · USGS Science

Results for “Technical Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70Linked to original sources
USGS1984

Bibliography of water-resources reports for Arizona through 1982

This bibliography is a listing of reports concerning the water resources of Arizona obtained by computer search of three bibliographic files: Water Resources Scientific Information Center (WRSIC); National Technical Information Service (NTIS); and GEOREF, from the American Geological Institute. The three files gave listings of several hundred reports, not all of which have been retained in the present bibliography. For example, abstracts and masters' theses are not listed in the final version and some reports for which the subject matter was thought to be irrelevant to a scientific bibliography are not listed. Also included are all the references listed in the two previously published bibliographies of the Arizona District. Thus, it is a comprehensive listing of water-resources reports for the State of Arizona, and some of the reports cover parts of adjacent states. Discussions of related subjects, such as geology, are included in many of the reports. A subject index and an author index to the bibliography are included to facilitate its use.

Arizona↗
USGS1988

Flood of May 26-27, 1984 in Tulsa, Oklahoma

The greatest flood disaster in the history of Tulsa, Oklahoma occurred during 8 hours from 2030 hours May 26 to 0430 hours May 27, 1984, as a result of intense rainfall centered over the metropolitan area. Storms of the magnitude that caused this flood are not uncommon to the southern great plains. Such storms are seldom documented in large urban areas. Total rainfall depth and rainfall distribution in the Tulsa metropolitan area during the May 26-27 storm were recorded by 16 recording rain gages. This report presents location of recording rain gages with corresponding rainfall histograms and mass curves, lines of equal rainfall depth (map A), and flood magnitudes and inundated areas of selected streams within the city (map B). The limits of the study areas (fig. 1) are the corporate boundaries of Tulsa, an area of about 185 square miles. Streams draining the city are: Dirty Butter, Coal, and Mingo Creeks which drain northward into Bird Creek along the northern boundary of the city; and Cherry, Crow, Harlow, Joe Haikey, Fry, Vensel, Fred, and Mooser Creeks which flow into the Arkansas River along the southern part of the city. Flooding along Haikey, Fry, Fred, Vensel, and Mooser Creeks was not documented for this report. The Arkansas River is regulated by Keystone Dam upstream from Tulsa (fig. 1). The Arkansas River remained below flood stage during the storm. Flooded areas in Tulsa (map B) were delineated on the topographic maps using flood profiles based on surveys of high-water marks identified immediately after the flood. The flood boundaries show the limits of stream flooding. Additional areas flooded because of overfilled storm drains or by sheet runoff are not shown in this report. Data presented in this report, including rainfall duration and frequency, and flood discharges and elevations, provide city officials and consultants a technical basis for making flood-plain management decisions.

Hydrologic Atlas↗
USGS1979

Proceedings of the First membership conference of the National Water Data Exchange, May 9-11, 1978, Denver, Colorado

This report contains the proceedings of the first membership conference of the National Water Data Exchange (NAWDEX). The purpose of the conference was to acquaint participants in the NAWDEX program with the systems, data resources, and services available throughout the membership, to establish improved personal relationships within the membership, and to serve as a forum for the exchange of ideas and expertise on matters relating to improving the operation of NAWDEX and identifying the needs of the water-data community. Sixteen papers were presented at the conference which describe data systems of member organizations, needs of the data community, and programs of national interest. These papers are published in their entirety in this proceedings volume. Four working panels were also conducted dealing with (1) Program Administration, Management, and Coordination; (2) Recommended Standards for the Handling and Exchange of Water Data; (3) Water Data Indexing and Technical Systems Development; and (4) Request, Response and Service Activities. The reports and conclusions of these panels are included also. (Woodard-USGS)

Open-File Report↗
USGS2020

Louisiana Adaptive Management Status and Improvement Report: Vision and Recommendations

As part of the process to increase implementation of adaptive management for ecosystem-based coastal restoration within Louisiana, we aim for this report to be broadly applicable across planning processes as well as funding and implementing entities. It compiles technical knowledge and guidance summarized as key findings through the text which lead to eight priority recommendations to improve application of adaptive management in Louisiana. This report identifies critical linkage points and opportunities for knowledge and data transfers within, and among, agencies in Louisiana. The primary focus is on CPRA and others affiliated with the LA TIG. This report presents a consensus based common vision for adaptive management of coastal restoration implementation in Louisiana. As CPRA is the primary agency responsible for coordinating and facilitating coastal restoration projects within the state of Louisiana, the primary source of information and experience was collated from personnel and processes carried out at CPRA. To capture needs and mechanisms ,across agencies, extensive input was also received from the LA TIG, representing the other state and federal Trustees.

Louisiana↗
USGS2004

Fort Collins Science Center

The U.S. Geological Survey's Fort Collins Science Center (FORT) is one of 17 USGS biological science centers nationwide. FORT conducts research and develops technical applications to assist land managers in understanding and managing biological resources, habitats, and ecosystems. Although the majority of FORT's activities are conducted within the 15-state Central Region of the USGS, many FORT projects are national or international in scope. FORT serves all Department of the Interior land management bureaus and other natural resource agencies. In addition, FORT scientists partner with DOI and other federal entities such as CDC, DOE, EPA, NASA, NIH, and USDA to share expertise and resources. FORT also partners with several universities and works cooperatively with states and nongovernmental organizations. Products and services include reports and publications, predictive models and software, maps and GIS products, and other technical assistance in the form of meetings, workshops, training, field visits, and needs assessments.

Fact Sheet↗
USGS2025

System characterization report on the Environmental Mapping and Analysis Program (EnMAP)

This report addresses system characterization of the Environmental Mapping and Analysis Program hyperspectral sensor by the DLR (German Aerospace Center, ground segment project management), GFZ (Deutsches Geoforschungszentrum, science lead) and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the EnMAP hyperspectral sensor; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), and radiometric performances of the EnMAP hyperspectral sensor. Results of these analyses indicate that the Environmental Mapping and Analysis Program has a band-to-band geometric performance in the range of −0.135 to 0.15 pixel, geometric performance relative to the Operational Land Imager in the range of −27.716 meters (−0.92 pixel) to 32.892 meters (1.09 pixels) offset in comparison to Landsat 8 Operational Land Imager, offset of a radiometric comparison in the range of −0.012 to 0.020, slope of a radiometric comparison in the range of 0.947 to 1.031.

Open-File Report↗
USGS2024

System characterization report on the Earth Surface Mineral Dust Source Investigation (EMIT) sensor

Executive Summary This report addresses system characterization of the Earth Surface Mineral Dust Source Investigation (EMIT) sensor, an imaging spectrometer developed by the National Aeronautics and Space Administration. This report is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior) and radiometric performances. Results of these analyses indicate that the EMIT sensor has a band-to-band geometric performance in the range of −0.355 to 0.210 pixel with a few exceptions of shortwave infrared channels. Geometric offset relative to the Landsat 8 Operational Land Imager ranged from −15.966 meters (−0.266 pixel) to 43.844 meters (0.731 pixel). Offset of a radiometric comparison ranged from −0.016 to 0.025, and slope of a radiometric comparison ranged from 0.837 to 0.985. EMIT agreed with Radiometric Calibration Network measurements within 5 percent across most of the spectral channels.

Open-File Report↗
USGS1994

The KRISP 90 seismic experiment-a technical review

On the basis of a preliminary experiment in 1985 (KRISP 85), a seismic refraction/wide-angle reflection survey and a teleseismic tomography experiment were jointly undertaken to study the lithospheric structure of the Kenya rift down to depths of greater than 200 km. This report serves as an introduction to a series of subsequent papers and will focus on the technical description of the seismic surveys of the main KRISP 90 effort. The seismic refraction/wide-angle reflection survey was carried out in a 4-week period in January and February 1990. It consisted of three profiles: one extending along the rift valley from Lake Turkana to Lake Magadi, one crossing the rift at Lake Baringo, and one located on the eastern flank of the rift proper. A total of 206 mobile vertical-component seismographs, with an average station interval of about 2 km, recorded the energy of underwater and borehole explosions to distances of up to about 550 km. During the teleseismic survey an array of 65 seismographs was deployed to record teleseismic, regional and local events for a period of about 7 months from October 1989 to April 1990. The elliptical array spanned the central portion of the rift, with Nakuru at its center, and covered an area about 300 × 200 km, with an average station spacing of 10–30 km.

Tectonophysics↗
USGS2009

Particle Size Characterization of Water-Elutriated Libby Amphibole 2000 and RTI International Amosite

This report presents data on particle characterization analyzed by scanning electron microscopy on Libby amphibole collected by the U.S. Geological Survey in 2000 (LA2000) and amosite material collected by RTI International (RTI amosite). The particle characterization data were generated to support a portion of the Libby Action Plan. Prior to analysis, the raw LA2000 and RTI amosite materials were subjected to a preparation step. Each sample was water-elutriated by U.S. Environmental Protection Agency (USEPA) Office of Research and Development, Research Triangle Park using the methods generally described in another published report and then delivered to the U.S. Geological Survey, Denver Microbeam Laboratory for analysis. Data presented here represent analyses performed by the U.S. Geological Survey, Denver Microbeam Laboratory and USEPA National Enforcement Investigations Center. This report consists of two Excel spreadsheet files developed by USEPA, Region 8 Superfund Technical Assistance Unit and describe the particle size characterization of the LA2000 and RTI amosite, respectively. Multiple tabs and data entry cells exist in each spreadsheet and are defined herein.

Open-File Report↗
USGS1973

Floods of 1971 and 1972 on Glover Creek and Little River in southeastern Oklahoma

Heavy rains of December 9-10, 1971, and Oct. 30-31, 1972, caused outstanding floods on Glover Creek and Little River in McCurtain County in southeastern Oklahoma. This report presents hydrologic data that document the extent of flooding, flood profiles, and frequency of flooding on reaches of both streams. The data presented provide a technical basis for formulating effective flood-plain zoning that will minimize existing and future flood problems. The report also can be useful for locating waste-disposal and water-treatment facilities, and for the development of recreational areas. The area studied includes the reach of Little River on the Garvin and Idabel 7 1/2-minute quadrangles (sheet 1) and the reach of Glover Creek on the southwest quarter of the Golden 15-minute quadrangle (sheet 2). The flood boundaries delineated on the maps are the limits of flooding during the December 1971 and October 1972 floods. Any attempt to delineate the flood boundaries on streams in the study area other than Glover Creek and Little River was considered to be beyond the scope of this report. The general procedure used in defining the flood boundaries was to construct the flood profiles from high-water marks obtained by field surveys and by records at three stream-gaging stations (two on Little River and one on Glover Creek.). The extent of flooding was delineated on the topographic maps by using the flood profiles to define the flood elevations at various points along the channel and locating the elevations on the map by interpolating between contours (lines of equal ground elevation). In addition, flood boundaries were defined in places by field survey, aerial photographs, and information from local residents. The accuracy of the flood boundaries is consistent with the scale and contour interval of the maps (1 inch = 2,000 feet; contour interval 10 and 20 feet), which means the flood boundaries are drawn as accurately as possible on maps having 10- and 20-foot contour intervals.

Oklahoma↗
USGS2021

System characterization report on the WorldView-3 Imager

Executive Summary This report addresses system characterization of the Maxar WorldView-3 satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence in 2020. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. WorldView-3 is a high-resolution multispectral satellite launched in 2014 by Maxar Technologies on an Atlas V launch vehicle from Vandenberg Air Force Base in California for Earth resources monitoring. WorldView-3 provides substantial technical improvements to previous WorldView satellites, including spectral bands, ground sample distance, and swath. The WorldView-3 satellite was designed and built by Lockheed Martin for Maxar Technologies using the BCP–5000 bus with the WorldView-3 Imager and the Clouds, Aerosols, Vapors, Ice, and Snow sensor. The high-resolution WorldView-3 Imager is the main instrument, and the Clouds, Aerosols, Vapors, Ice, and Snow sensor provides additional data on obscurants and other atmospheric effects used in data production. More information on Maxar WorldView satellites and sensors is available within the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.maxar.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that WorldView-3 has a range of interior geometric performance of −0.09 (−0.07 pixel) to 0.24 meter (0.19 pixel) in band-to-band registration; an exterior geometric performance in the range of a −21.10- (−2.11 pixels) to 28.23-meter (2.82 pixels) offset in comparison to Sentinel-2; a radiometric performance in the range of −0.121 to 1.420 (offset and slope); and a spatial performance in the range of 1.2 to 1.7 pixels at full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.093 to 0.185.

Open-File Report↗
USGS2022

System characterization report on Planet SkySat

This report addresses system characterization of Planet’s SkySat and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. SkySat is a constellation of submeter resolution Earth observation satellites providing analytics services, high-definition video, and imagery. The goal for the constellation is to capture multiple daily repeats of high-resolution imagery over any spot on the Earth. As of September 2020, 21 SkySat satellites have been launched, and the first launch occurred in November 2013. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that SkySat has an interior geometric performance in the range of a 0.38- (0.47 pixel) to 0.75-meter (m; 0.93 pixel) root mean square error in easting and a 0.27- (0.33 pixel) to 0.55-m (0.68 pixel) root mean square error in northing, in band-to-band registration; an exterior geometric performance in the range of 0.26 (0.32 pixel) to 1.04 m (1.28 pixels) offset in comparison to ground control points; a radiometric performance in the range of 0.033 to 0.797 (linear regression); and a spatial performance in the range of 3.7 to 4.3 pixels at full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.004 to 0.009.

Open-File Report↗
USGS2022

System characterization report on the Amazônia-1 multispectral sensor

Executive Summary This report addresses system characterization of the Instituto Nacional de Pesquisas Espaciais Amazônia-1 satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Amazônia-1 is a four-band imager with a 64-meter (m) pixel ground sample distance. Amazônia-1 was launched in February 2021 into a Sun-synchronous orbit of 752 kilometers with an inclination of 98.4 degrees and a swath width of 850 kilometers. The satellite has an expected lifetime of about 4 years. More information on Amazônia-1 is available in the “Land Remote Sensing Satellites Online Compendium” ( https://calval.cr.usgs.gov/apps/compendium ). The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that the Amazônia-1 satellite has an interior geometric performance in the range of −3.584 m (−0.056 pixel) to 0.320 m (0.005 pixel) in easting and −1.984 m (−0.031 pixel) to 2.048 m (0.032 pixel) in northing in band-to-band registration, an exterior geometric performance of −37.256 m (−0.621 pixel) to 54.758 m (0.913 pixel) in easting and −12.684 m (−0.211 pixel) to 54.898 m (0.915 pixel) in northing offset in comparison to the Landsat 8 Operational Land Imager, a radiometric performance in the range of 0.030 to 0.143 in offset and 0.662 to 0.825 in slope, and a spatial performance in the range of 1.62 to 2.06 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.062 to 0.115.

Open-File Report↗
USGS2022

System characterization report on PRecursore IperSpettrale della Missione Applicativa (PRISMA)

Executive Summary This report addresses system characterization of the Italian Space Agency’s PRecursore IperSpettrale della Missione Applicativa (PRISMA) and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (band to band and image to image), radiometric, and spatial performances. Results of these analyses indicate that PRISMA has a band-to-band geometric performance in the range of −0.046 to 0.040 pixel; an image-to-image geometric performance (relative to the Landsat 8 Operational Land Imager) in the range of −60.791 meters (m; −2.03 pixels) to 299.541 m (9.98 pixels); a radiometric performance in the range of −0.037 to −0.001 in offset and 1.026 to 1.274 in slope; and a spatial performance with a relative edge response in the range of 0.56 to 0.63, full width at half maximum in the range of 1.84 to 1.97 pixels, and a modulation transfer function at a Nyquist frequency in the range of 0.054 to 0.096. Regarding fairly large geometric accuracy, the following explanation is provided to help the reader. The geometric accuracy required for PRISMA is a 200-m circular error at 90 percent (CE90) without ground control points (GCPs), a 15-m CE90 using GCPs is documented in the PRISMA mission overview (Agenzia Spaziale Italiana, 2021). The PRISMA images used for the current system characterization were georeferenced without using any GCPs; thus, the 200-m geometric accuracy requirement is applied. Beginning in 2022, a worldwide GCP database will be used in the PRISMA product processing chain, which will improve georeferencing accuracy to meet the 15-m CE90 requirement.

Open-File Report↗
USGS2023

System characterization report on the Pléiades Neo Imager

Executive Summary This report addresses system characterization of the Pléiades Neo satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Pléiades Neo is a constellation of four identical very-high-resolution optical satellites operated by Airbus Defence and Space. The first two satellites, Pléiades Neo-3 and -4, were launched in April and August 2021, respectively. The next two satellites, launched in December 2022, did not reach orbit because of Vega-C launch vehicle failure. Pléiades Neo provides several technical improvements to previous Pléiades-HR satellites, including the addition of coastal aerosol (deep blue) and red edge spectral bands, with improved ground sample distance and swath. The Pléiades Neo satellites were designed and built by Airbus Defence and Space with the high-resolution, multispectral imager for Earth imaging and use the S950 optical satellite bus. The high-resolution sensor on Pléiades Neo collects Earth data in the visible and near-infrared region with six bands and a panchromatic band. The satellites can operate off nadir to achieve a revisit of less than 1 day. More information on Pléiades Neo satellites and sensors is available in the “Land Remote Sensing Satellites Online Compendium” ( https://calval.cr.usgs.gov/apps/compendium# ) and from the manufacturer ( https://www.intelligence-airbusds.com/imagery/constellation/pleiades-Neo/ ). The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Pléiades Neo has an interior geometric performance in the range of 0.01 meter (m; 0.008 pixel) to −0.017 m (−0.014 pixel) in band-to-band registration; an exterior geometric performance in the range of −7.015 m (−0.702 pixel) to 3.846 m (0.385 pixel) offset in comparison to Sentinel-2 using ground control points of 2.2 to 7.2 m (95-percent circular error); a radiometric performance in the range of −0.070 (minimum) to −0.053 (maximum) in offset and 1.107 (minimum) to 1.202 (maximum) in slope; and a spatial performance in the range of 1.002 to 1.226 pixels at full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.22 to 0.34 (bands 2–7).

Open-File Report↗
USGS2022

System characterization report on the Satellogic NewSat multispectral sensor

Executive Summary This report addresses system characterization of Satellogic’s NewSat satellite (also known as ÑuSat) and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Since 2016, Satellogic has launched 17 NewSat satellites. All NewSat satellites have four-band imagers with a 1-meter (m) ground sample distance, and values in pixels are identical to values in meters. All NewSats have been launched into Sun-synchronous orbits of about 475 kilometers, with inclinations of about 97.5 degrees. The satellites have expected lifetimes of about 3 years. More information on the Satellogic satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://satellogic.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that the NewSat satellites have an interior geometric performance in the range of −0.119 (−0.119 pixel) to 0.020 m (0.020 pixel) in easting and −0.148 (−0.148 pixel) to 0.014 m (0.014 pixel) in northing in band-to-band registration, an exterior geometric performance of −9.04 (−9.04 pixels) to −5.84 m (−5.84 pixels) in easting and 1.25 (1.25 pixels) to 3.11 m (3.11 pixels) in northing offset in comparison to Sentinel-2, an exterior geometric performance using ground control points of a 6.5-m circular error (95 percent), a radiometric performance in the range of 0.034 to 0.081 in offset and 0.652 to 0.808 in slope, and a spatial performance in the range of 1.61 to 1.76 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.081 to 0.138.

Open-File Report↗