USGS Science⌕ Search

SEARCH · USGS Science

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70Linked to original sources

Microsatellite DNA markers for the study of Allegheny woodrat (Neotoma magister) populations and cross-species amplification the genus Neotoma

The Allegheny woodrat ( Neotoma magister ) is a colony-forming murid rodent inhabiting rock outcrops, cliff and talus slopes, and caves within the Central and Southern Appalachians of North America ( Hall 1981 ). The species is currently considered threatened, endangered, or at risk throughout its range purportedly due to the direct or indirect effects of human-fragmented landscapes. Currently, Allegheny woodrat management units are arbitrarily defined as metapopulations that roughly constitute contiguous rock outcrops interconnected by forested habitat. To strengthen long-term population stability and reduce the need for further protection through the regulatory process, an effective conservation programme for this at-risk species will require unambiguous, objectively defined units of management that discern evolutionarily important lineages ( Avise 1994 ). A prerequisite in the development of management strategies that recognize and maintain significant woodrat lineages is a thorough understanding of the levels of gene exchange among geographically proximate and distal populations. However, no information exists on population structure, levels of gene flow, or relatedness among Allegheny woodrat populations or colonies. As an initial step towards addressing this research need, we have developed a suite of polymorphic microsatellite DNA markers for this species. In this paper, we describe the isolation and characterization of these markers and demonstrate their suitability in amplifying putatively homologous products in seven additional Neotoma species.

Alabama, Georgia, Kentucky, Mississippi, North Car↗

Evaluation of long-term water-level declines in basalt aquifers near Mosier, Oregon

The Mosier area lies along the Columbia River in northwestern Wasco County between the cities of Hood River and The Dalles, Oregon. Major water uses in the area are irrigation, municipal supply for the city of Mosier, and domestic supply for rural residents. The primary source of water is groundwater from the Columbia River Basalt Group (CRBG) aquifers that underlie the area. Concerns regarding this supply of water arose in the mid-1970s, when groundwater levels in the orchard tract area began to steadily decline. In the 1980s, the Oregon Water Resources Department (OWRD) conducted a study of the aquifer system, which resulted in delineation of an administrative area where parts of the Pomona and Priest Rapids aquifers were withdrawn from further appropriations for any use other than domestic supply. Despite this action, water levels continued to drop at approximately the same, nearly constant annual rate of about 4 feet per year, resulting in a current total decline of between 150 and 200 feet in many wells with continued downward trends. In 2005, the Mosier Watershed Council and the Wasco Soil and Water Conservation District began a cooperative investigation of the groundwater system with the U.S. Geological Survey. The objectives of the study were to advance the scientific understanding of the hydrology of the basin, to assess the sustainability of the water supply, to evaluate the causes of persistent groundwater-level declines, and to evaluate potential management strategies. An additional U.S. Geological Survey objective was to advance the understanding of CRBG aquifers, which are the primary source of water across a large part of Oregon, Washington, and Idaho. In many areas, significant groundwater level declines have resulted as these aquifers were heavily developed for agricultural, municipal, and domestic water supplies. Three major factors were identified as possible contributors to the water-level declines in the study area: (1) pumping at rates that are not sustainable, (2) well construction practices that have resulted in leakage from aquifers into springs and streams, and (3) reduction in aquifer recharge resulting from long-term climate variations. Historical well construction practices, specifically open, unlined, uncased boreholes that result in cross-connecting (or commingling) multiple aquifers, allow water to flow between these aquifers. Water flowing along the path of least resistance, through commingled boreholes, allows the drainage of aquifers that previously stored water more efficiently. The study area is in the eastern foothills of the Cascade Range in north central Oregon in a transitional zone between the High Cascades to the west and the Columbia Plateau to the east. The 78-square mile (mi 2 ) area is defined by the drainages of three streams - Mosier Creek (51.8 mi 2 ), Rock Creek (13.9 mi 2 ), and Rowena Creek (6.9 mi 2 ) - plus a small area that drains directly to the Columbia River.The three major components of the study are: (1) a 2-year intensive data collection period to augment previous streamflow and groundwater-level measurements, (2) precipitation-runoff modeling of the watersheds to determine the amount of recharge to the aquifer system, and (3) groundwater-flow modeling and analysis to evaluate the cause of groundwater-level declines and to evaluate possible water resource management strategies. Data collection included the following: 1. Water-level measurements were made in 37 wells. Bi-monthly or quarterly measurements were made in 30 wells, and continuous water-level monitoring instruments were installed in 7 wells. The measurements principally were made to capture the seasonal patterns in the groundwater system, and to augment the available long-term record. 2. Groundwater pumping was measured, reported, or estimated from irrigation, municipal and domestic wells. Flowmeters were installed on 74 percent of all high-capacity irrigation wells in the study area. 3. Borehole geophysical data were collected from a known commingling well. These data measured geologic properties and vertical flow through the well. 4. Streamflow measurements were made in Rock, Rowena, and Mosier Creeks. A long-term recording stream-gaging station was reestablished on Mosier Creek to provide a continuous record of streamflow. Streamflow measurements also were made along the creeks periodically to evaluate seasonal patterns of exchange between streams and the groundwater system. Major findings from the study include: 1. Annual average precipitation ranges from 20 to 54 inches across the study area with an average value of about 30 inches. Based on rainfall-runoff modeling, about one-third of this water infiltrates into the aquifer system. 2. Currently, about 3 percent of the water infiltrated into the groundwater system is extracted for municipal, agricultural, and rural residential use. The remainder of the water flows through the aquifer system, discharging into local streams and the Columbia River. About 80 percent of recent pumping supports crop production. The city of Mosier public supply wells account for about 10 percent of total pumping, with the remaining 10 percent being pumped from the private wells of rural residents. 3. Groundwater-flow simulation results indicate that leakage through commingling wells is a significant and likely the dominant cause of water level declines. Leakage patterns can be complex, but most of the leaked water likely flows out the CRBG aquifer system through very permeable sediments into Mosier Creek and its tributary streams in the OWRD administrative area. Model-derived estimates attribute 80-90 percent of the declines to commingling, with pumping accounting for the remaining 10-20 percent. Although decadal trends in precipitation have occurred, associated changes in aquifer recharge are likely not a significant contributor to the current water level declines. 4. As many as 150 wells might be commingling. To evaluate whether or not the local combination of geology and well construction have resulted in aquifer commingling at a particular well, the well needs to be tested by measuring intraborehole flow. During geophysical testing of one known commingling well, the flow rate through the well between aquifers ranged between 70 and 135 gallons per minute (11-22 percent of total annual pumping in the study area). Historically, when aquifer water levels were 150-200 feet higher, this flow rate would have been correspondingly higher. 5. Because aquifer commingling through well boreholes is likely the dominant cause of aquifer declines, flow simulations were conducted to evaluate the benefit of repairing wells in specified locations and the benefit of recharging aquifers using diverted flow from study area creeks. As part of this analysis, maps were generated that show which areas are more vulnerable to commingling. These maps indicate that the value of repairing wells in the area generally coincident with the OWRD administrative area is higher than in areas farther upstream in the watershed. Simulation results also indicate that artificial recharge of the aquifers using diverted creek water will not significantly improve water levels in the aquifer system unless at least some commingling wells are repaired first. Repairs would entail construction of wells in a manner that prevents commingling of multiple aquifers. The value of artificially recharging the aquifers improves as more wells are repaired because the aquifer system more efficiently stores water.

Oregon↗

Preliminary Report on the White Canyon Area, San Juan County, Utah

The White Canyon area in San Juan County, Utah, contains known deposits of copper-uranium ore and is currently being mapped and studied by the Geological Survey. To date, approximately 75 square miles, or about 20 percent of the area, has been mapped on a scale 1 inch=1 mile. The White Canyon area is underlain by more than 2,000 feet of sedimentary rocks, Carboniferous to Jurassic(?) in age. The area is on the flank of the Elk Ridge anticline, and the strata have a regional dip of 1 deg to 2 deg SW. The Shinarump conglomerate of Late Triassic age is the principal ore-bearing formation. The Shinarump consists of lenticular beds of sandstone, conglomeratic sandstone, clay, and siltstone, and ranges in thickness from a feather edge to as much as 75 feet. Locally the sandstones contain silicified and carbonized wood and fragments of charcoal. These vegetal remains are especially common in channel-fill deposits. Jointing is prominent in the western part of the area, and apparently affects all formations. Adjacent to the joints some of the redbeds in the sequence are bleached. Deposits of copper-uranium minerals have been found in the Moenkopi, Shinarump, and Chinle formations, but the only production of ore has been from the Shinarump conglomerate. The largest concentration of these minerals is in the lower third of the Shinarump, and the deposits seem to be controlled in part by ancient channel fills and in part by fractures. Locally precipitation of the copper and uranium minerals apparently has been aided by charcoal and clays. Visible uranium minerals include both hard and soft pitchblende and secondary hydrosulfates, phosphates, and silicates. In addition, unidentified uranium compounds are present in carbonized wood and charcoal, and in veinlets of hydrocarbons. Base-metal sulfides have been identified in all prospects that extend beyond the oxidized zone. Secondary copper minerals in the oxidized zone include the hydrous sulfates and carbonates, and possibly chrysocolla. The principal gangue minerals are quartz, clay minerals, chlorite, oxides of iron and manganese, alunite, calcite, gypsum, pyrite, allophane, gibbsite, opal, and chalcedony. The origin of the copper-uranium ores has not been determined, but the association of many deposits with fractures, the mineralogic assemblage, and a lead-uranium age determination of 50 to 60 million years for the pitchblende in the Happy Jack mine favor the hypothesis that the ores are of hydrothermal origin and were deposited in early Tertiary time. Criteria believed to be the most useful in prospecting for new deposits are (1) visible uranium minerals; (2) visible copper minerals; (3) alunite; (4) hydrocarbons; and (5) bleaching of the underlying Moenkopi formation.

Circular↗

Radon in ground water of the lower Susquehanna and Potomac River basins

Ground-water samples collected from 267 wells were analyzed for radon as part of a water-quality reconnaissance of subunits of the Lower Susquehanna and Potomac River Basins conducted by the United States Geological Survey (USGS) as part of the National Water-Quality Assessment (NAWQA) program. Radon is a product of the radioactive decay of uranium. Airborne radon has been cited by the Surgeon General of the United States as the second-leading cause of lung cancer and the United States Environmental Protection Agency (USEPA) has identified ground-water supplies as possible contributing sources of indoor radon. Eighty percent of ground-water samples collected for this study were found to contain radon at activities greater than 300 pCi/L (picocuries per liter), the USEPA's proposed Maximum Contaminant Level for radon in drinking water, and 31 percent of samples contained radon at activities greater than 1,000 pCi/L. The 10 subunits where samples were collected were grouped into three classes - median ground-water radon activity less than 300 pCi/L, between 300 pCi/L and 1,000 pCi/L, and greater than 1,000 pCi/L. Subunits underlain by igneous and metamorphic rocks of the Piedmont Physiographic Province typically have the highest median ground-water radon activities (greater than 1,000 pCi/L); although there is a large variation in radon activities within most of the subunits. Lower median radon activities (between 300 pCi/L and 1,000 pCi/L) were found in ground water in subunits underlain by limestone and dolomite. Of three subunits underlain by sandstone and shale, one fell into each of the three radon-activity classes. The large variability within these subunits may be attributed to the fact that the uranium content of sandstone and shale is related to the uranium content of the sediments from which they formed.

lower Susquehanna and Potomac River basins↗

Geologic map of the Dog River and northern part of the Badger Lake 7.5′ quadrangles, Hood River County, Oregon

The Dog River and northern part of the Badger Lake 7.5' quadrangles encompasses an area of ~201 km2 (77.6 mi2) of the High Cascades of north-central Oregon, lying across the eastern slopes of Mount Hood volcano (Figure 1-1; Plate 1; referred to herein as Dog River–Badger Lake area). Mount Hood, known as Wy’east to Native Americans, is Oregon’s tallest peak (3,427 m [11,241 ft]). The volcano has erupted episodically for the past 500,000 years, experiencing two major eruptive periods during the last 1,500 years (Scott and others, 1997a; Scott and others, 2003; Scott and Gardner, 2017). Cascade Range volcanism and structural development in the area dates back longer, with eruptive activity dating from latest Miocene to recent time; part of that volcano-tectonic record is detailed by new high-resolution geologic mapping presented here. The geology of the Dog River–Badger Lake area was mapped by the Oregon Department of Geology and Mineral Industries (DOGAMI) between 2017 and 2020, in collaboration with geoscientists from the U. S. Geological Survey Cascade Volcano Observatory (USGS CVO) and Hamilton College, New York. The primary objective of this investigation is to provide an updated and spatially accurate geologic framework for the Dog River–Badger Lake area as part of a multi-year study of the geology of the larger Middle Columbia Basin (Figure 1-1, Figure 1-2). Additional key objectives of this project are to: 1) determine the geologic history of volcanic rocks in this part of the northern Oregon Cascade Range, including lava flows and volcaniclastic deposits erupted from Middle Pleistocene to Holocene Mount Hood volcano; 2) provide significant new details about the structure and fault history along the northern segment of the High Cascades intra-arc graben (Hood River graben); and 3) better understand geologic hazards in the region, related to earthquakes, volcanoes, and landslides. New detailed geologic data presented here also provides a basis for future geologic, geohydrologic, and geohazard studies in the greater Middle Columbia Basin. Detailed geologic mapping in this part of the Middle Columbia Basin is a high priority of the Oregon Geologic Map Advisory Committee (OGMAC), supported in part by grants from the STATEMAP component of the USGS National Cooperative Geologic Mapping Program (G17AC00210, G19AC00160). Additional funds were provided by the State of Oregon. The core products of this study are this report, an accompanying geologic map and cross sections (Plate 1), an Esri ArcGIS™ geodatabase, and Microsoft Excel® spreadsheets tabulating point data for geochemistry, geochronology, magnetic polarity, orientation points, and well data. The geodatabase presents the new geologic mapping in a digital format consistent with the USGS National Cooperative Geologic Mapping Program Geologic Map Schema (GeMS) (U.S. Geological Survey National Cooperative Geologic Mapping Program, 2020). This geodatabase contains spatial information, including geologic polygons, contacts, structures, geochemistry, geochronology, magnetic observation, orientation points, and well data, as well as data about each geologic unit such as age, lithology, mineralogy, and structure. Digitization at scales of 1:8,000 or better was accomplished using a combination of high-resolution lidar topography and imagery. Surficial and bedrock geologic units contained in the geodatabase are depicted on the Plate 1 at a scale of 1:24,000. Both the geodatabase and geologic map are supported by this report describing the geology in detail.

Oregon↗

Trace-element variations at Summer Coon volcano, San Juan Mountains, Colorado, and the origin of continental-interior andesite

The Oligocene Summer Coon center, an eroded continental-interior volcano of the eastern San Juan Mountains, Colorado, was the source of magmas ranging in composition from basaltic andesite to rhyolite. Previous Pb and Sr isotope studies indicate derivation of the magmas from an isotopically homogeneous source. This study presents new data for rare-earth elements (REE), U, Th, Ba, Sr, Rb, and Ni from 10 samples of the Summer Coon sequence. Alkali elements are high in all rocks; as SiO 2 increases, Ba increases from 900 to 2,000 ppm, Rb increases from 35 to 90 ppm, Sr decreases from 900 to 350 ppm, K/Rb decreases slightly, Ba/Sr increases, U increases from 0.5 to 2.5 ppm, and Th increases from 2 to 7 ppm. Chondrite-normalized REE patterns are strongly fractionated in comparison with oceanic-arc andesite-dacite sequences. La is 80 to 120 times chondritic abundance, but Yb and Lu are less than 10 times chondritic abundance. Small negative Eu anomalies characterize the rhyolites. Nickel in the andesites is 40 to 70 ppm. The origin of the andesite is interpreted in terms of nonmodal partial melting of a trace-element—enriched garnet-bearing source, possibly subducted crust that has converted to eclogite. Rhyodacite and rhyolite are interpreted as low-pressure crystal-fractionation products of silicic andesite, in which crystallizing phases are hornblende rich in REE and plagioclase.

Colorado↗

Digital database of the geologic map of the middle east rift geothermal subzone, Kīlauea Volcano, Hawai‘i

This database release contains all the information used to produce Geologic Investigations Series I-2614 ( https://pubs.usgs.gov/imap/2614/ ). The main component of this digital release is a geodatabase prepared using ArcGIS, but Esri shapefiles are included as well. Kīlauea is an active shield volcano in the southeastern part of the Island of Hawai‘i. The middle East Rift Zone (MERZ) map includes about 27 square kilometers of the MERZ and shows the distribution of the products of 34 separate eruptions during late Holocene time. Lava flows erupted during 1983–86 have reached the mapped area. The subaerial part of the MERZ is 3–4 km wide and about 18 km long. It is a constructional ridge, 50–150 m above the adjoining terrain, marked by low spatter ramparts and cones as high as 60 m. Lava typically flowed either northeast or southeast, depending on vent location relative to the topographic crest of the rift zone. The MERZ receives more than 100 inches of rainfall annually and is covered by tropical rain forest. Vegetation begins to grow on lava a few months after its eruption. Relative heights of trees can be a guide to relative ages of underlying lava flows, but proximity to faults, presence of easily weathered cinders, and human activity also affect the rate of growth. The rocks have been grouped into five basic age groups. The framework for the ages assigned is provided by eight radiocarbon ages from nearby mapping by the authors and a single date from within this investigation area. The numerical ages are supplemented by observations of stratigraphic relations, degree of weathering, soil development, and vegetative cover.

Hawaii↗

Geologic map of the middle east rift geothermal subzone, Kīlauea Volcano, Hawaiʻi

Kīlauea is an active shield volcano in the southeastern part of the Island of Hawai'i. The middle east rift zone (MERZ) map includes about 27 square kilometers of the MERZ and shows the distribution of the products of 37 separate eruptions during late Holocene time. Lava flows erupted during 1983-96 have reached the mapped area. The subaerial part of the MERZ is 3-4 km wide and about 18 km long. It is a constructional ridge, 50-150 m above the adjoining terrain, marked by low spatter ramparts and cones as high as 60 m. Lava typically flowed either northeast or southeast, depending on vent location relative to the topographic crest of the rift zone. The MERZ receives more than 100 in. of rainfall annually and is covered by tropical rain forest. Vegetation begins to grow on lava a few months after its eruption. Relative heights of trees can be a guide to relative ages of underlying lava flows, but proximity to faults, presence of easily weathered cinders, and human activity also affect the rate of growth. The rocks have been grouped into five basic age groups. The framework for the ages assigned is provided by eight radiocarbon ages from previous mapping by the authors and a single date from the current mapping effort. The numerical ages are supplemented by observations of stratigraphic relations, degree of weathering, soil development, and vegetative cover.

Hawaii↗

Buddingtonite, ammonium feldspar, in the Phosphoria Formation, southeastern Idaho

Buddingtonite is distributed widely in the rocks of the Meade Peak Member of the Phosphoria Formation in southeastern Idaho and occurs in amounts up to about 50 percent. Most of the buddingtonite is in the middle mudstone interval of the member between two phosphate-rich intervals. The composition of the buddingtonite, in terms of a buddingtonite K-feldspar series, shows an apparent range of Bd 82 KF 18 to Bd 13 KF 87 , and compositions of Bd 72 KF 28 to Bd 50 KF 50 may be the most common. The predominant silicate mineral suite consists of buddingtonite-albite-illite. Albite is present in amounts up to about 20 percent. Buddingtonite may have developed directly from volcanic glass in the presence of abundant ammonium, derived from the decomposition of organic matter, in interstitial waters, or it may have formed at some later diagenetic stage from other products of volcanic glass alteration, such as montmorillonite or zeolites.

Idaho↗

High arsenic concentrations and enriched sulfur and oxygen isotopes in a fractured-bedrock ground-water system

Ground water with high arsenic concentrations (up to 26.6????mol L- 1) has sulfate enriched in 34S and 18O in the fractured-bedrock, ground-water system of the Kelly's Cove watershed, Northport, Maine, USA. The ranges of sulfur and oxygen isotope values in aqueous sulfate, ??34S[SO4] and ??18O[SO4], at the Kelly's Cove watershed are + 3.4 to + 4.9??? and - 2.0 to + 6.7???, respectively. These isotope values are strikingly similar to those of the Goose River, Maine watershed which has ??34S[SO4] and ??18O[SO4] ranges of + 3.7 to + 4.6 ??? and - 2.6 to + 7.5???, respectively. In both systems, high arsenic concentrations occur with high ??34S[SO4] and ??18O[SO4] values, yet redox conditions and underlying rock types are quite different. The isotope values of sulfide minerals, ??34S[min], from four bedrock cores vary over short distances and range from - 5.1 to + 7.5???. The ??34S[SO4] values are controlled by the ??34S[min] values with minor input of atmospheric SO4. The much narrower range in ??34S[SO4] values than ??34S[min] values is probably due to sufficient ground-water mixing at a scale greater than the ??34S[min] variability. The ??34S[SO4] values are about 2??? higher than the average ??34S[min] value and fall within the range of ??34S[min] values, indicating only minor fractionation due to bacterial reduction of SO4. The highest ??18O[SO4] values were measured in the downgradient, confined, arsenic-rich ground water. High ??18O[SO4] values there cannot be due to aeration by atmospheric oxygen, but may arise from reoxidation of reduced SO4 products. The enrichment factors of ??18O in SO4 compared to H2O, + 7.2 to + 15.5???, in the Kelly's Cove ground water and the negligible 34S enrichment is very similar to those derived from experimental data of anaerobic sulfide oxidation in the presence of Mn and Fe oxides. Sea level at the Kelly's Cove watershed was approximately 80??m above present sea level about 13 000??years before present, imposing reducing conditions on that area of the watershed. Sea level dropped approximately 60??m below present sea level about 11 000??years before present, allowing for possible oxidation of sulfide minerals and precipitation of arsenic in ferric oxyhydroxides during aeration of the ground-water system. Under present redox conditions, there is evidence that bacteria reduction of ferric oxyhydroxides releases arsenic. The fractionation of 18O in the SO4 during anaerobic oxidation of sulfide in the presence of Mn and Fe oxides and subsequent release of arsenic during Mn and Fe oxide reduction may explain the relationship between high arsenic concentrations and elevated 18O[SO4] at Kelly's Cove. ?? 2007 Elsevier B.V. All rights reserved.

Chemical Geology↗

Emplacement and differentiation of the york haven diabase sheet, Pennsylvania

Many of the high-Ti quartz-normative tholeiitic intrusive sheets in the early Mesozoic rift basins of the Eastern USA exhibit lateral differentiation from mafic cumulate units, through diabase, to relatively evolved iron-rich rock types. We have investigated a representative example in detail, the York Haven sheet in the Gettysburg basin of south-central Pennsylvania. It ranges in thickness from 330 m to 675 m, and we have sampled it from base to top along four separate stratigraphic sections evenly spaced over the extent of the intrusion. The easternmost section (York Haven) is entirely basaltic bronzite cumulate (average 15 vol. % bronzite), whereas the westernmost (Reesers Summit) consists of diabase and low-MgO diabase with a middle to upper 'sandwich zone' of ferrogabbro. The intervening sections feature rock types transitional between the two end-member sequences. Chemically, the rock series shows a gradual east to west depletion of compatible elements (Mg, Ca, Ni, and Cr), and enrichment of incompatible elements [Ti, Fe, Na, K, P, Cu, Zr, Th, Ta, Hf, Sb, Cs, As, platinum group elements (PGEs), and rare earth elements (REEs)].We suggest two main processes for the trends observed in the York Haven sheet. First, flow differentiation during ascent and lateral injection of the parental magma produced a tongue of basaltic bronzite cumulate that thins from southeast to northwest and passes laterally into diabase, and, at the distal end of the intrusion, into low-MgO diabase. Then, in the latter stages of crystallization, densitydriven hydrothermal fluids transported incompatible elements westward, into structurally higher parts of the intrusion. Reaction of this residual aqueous fluid with partly crystallized low-MgO diabase produced a zone of ferrogabbro rich in hydrothermal replacement products (e.g., Cl-amphibole, biotite, ferrohypersthene, and skeletal ilmenite) and precipitates (e.g., quartz, fayalite, Cl-apatite, sulfides, and PGE minerals). © 1993 Oxford University Press.

Pennsylvania↗

Geophysical and geologic maps of Mountain Pass and vicinity, California and Nevada

U.S. Geological Survey Scientific Investigations Map 3412 is a series of products that consists of geophysical and geologic maps of Mountain Pass and vicinity, California. Maps A and B (red outline in above map image) are gravity and aeromagnetic maps, respectively. The map series was begun as part of an effort to study regional crustal structures as an aid to understanding the geologic framework and mineral resources of the southeast Mojave Desert. Mountain Pass resides within the southeast Mojave Desert, and it is host to a one of the world’s largest rare earth element carbonatite deposits. The deposit is found along a north-northwest- trending, fault-bounded block that extends along the eastern parts of the Clark Mountain Range, Mescal Range, and Ivanpah Mountains. This Paleoproterozoic block is composed of a 1.7-Ga metamorphic complex of gneiss and schist that underwent widespread metamorphism and associated plutonism during the Ivanpah orogeny. The Paleoproterozoic rocks were intruded by a Mesoproterozoic (1.4 Ga) ultrapotassic alkaline intrusive suite and carbonatite body. The intrusive rocks include, from oldest to youngest, shonkinite, mesosyenite, syenite, quartz syenite, potassic granite, carbonatite, carbonatite dikes, and late shonkinite dikes. Each map in the series provides the basis for geophysical and geologic interpretations of the Mountain Pass carbonatite terrane. Combined, they provide a comprehensive framework of the regional subsurface geologic structure of the area. Together, they form the first publicly available series of geophysical and geologic maps of this part of the southeast Mojave Desert.

California, Nevada↗

Field-trip guide to mafic volcanism of the Cascade Range in Central Oregon—A volcanic, tectonic, hydrologic, and geomorphic journey

The Cascade Range in central Oregon has been shaped by tectonics, volcanism, and hydrology, as well as geomorphic forces that include glaciations. As a result of the rich interplay between these forces, mafic volcanism here can have surprising manifestations, which include relatively large tephra footprints and extensive lava flows, as well as water shortages, transportation and agricultural disruption, and forest fires. Although the focus of this multidisciplinary field trip will be on mafic volcanism, we will also look at the hydrology, geomorphology, and ecology of the area, and we will examine how these elements both influence and are influenced by mafic volcanism. We will see mafic volcanic rocks at the Sand Mountain volcanic field and in the Santiam Pass area, at McKenzie Pass, and in the southern Bend region. In addition, this field trip will occur during a total solar eclipse, the first one visible in the United States in more than 25 years (and the first seen in the conterminous United States in more than 37 years). The Cascade Range is the result of subduction of the Juan de Fuca plate underneath the North American plate. This north-south-trending volcanic mountain range is immediately downwind of the Pacific Ocean, a huge source of moisture. As moisture is blown eastward from the Pacific on prevailing winds, it encounters the Cascade Range in Oregon, and the resulting orographic lift and corresponding rain shadow is one of the strongest precipitation gradients in the conterminous United States. We will see how the products of the volcanoes in the central Oregon Cascades have had a profound influence on groundwater flow and, thus, on the distribution of Pacific moisture. We will also see the influence that mafic volcanism has had on landscape evolution, vegetation development, and general hydrology.

Oregon↗

Geologic framework for the national assessment of carbon dioxide storage resources—Atlantic Coastal Plain and Eastern Mesozoic Rift Basins

This chapter presents information pertinent to the geologic carbon dioxide (CO 2 ) sequestration potential within saline aquifers located in the Atlantic Coastal Plain and Eastern Mesozoic Rift Basins of the Eastern United States. The Atlantic Coastal Plain is underlain by a Jurassic to Quaternary succession of sedimentary strata that onlap westward onto strata of the Appalachian Piedmont physiographic province and generally thicken eastward toward the present-day Atlantic coastline and onto the present-day continental shelf. Although no significant petroleum discoveries have been made on the coastal plain, the deep saline aquifers of the region appear to contain porous strata (potential reservoirs, or “storage formations”) that are overlain by fine-grained, laterally continuous strata (potential seals), which are prospective CO 2 sequestration targets. For the Atlantic Coastal Plain, we identify two storage assessment units (SAUs), both of which consist of Cretaceous strata. The two SAUs are the Lower Cretaceous Composite SAU C50700101 and the Upper Cretaceous Composite SAU C50700102. The Eastern Mesozoic Rift Basins are a chain of generally southwest- to northeast-trending, elongate sedimentary basins that either underlie the Atlantic Coastal Plain or crop out within adjacent geologic provinces to the west. Similar to the Atlantic Coastal Plain, there has been no significant oil and gas production from any of the basins, although there is a proven petroleum system in several of them. At least three of these basins appear to contain potential storage formations overlain by potential seal units. Most of the other basins were not assessed because a storage and (or) seal formation could not be established in the timeframe of the assessment, often because of the paucity of subsurface data for these basins in comparison to other petroliferous basins of the United States. Thus, we present information supporting one quantitative assessment in the Newark basin, as well as information supporting two nonquantitative assessments, one for strata in the Gettysburg basin and the other for strata in the Culpeper basin. We briefly discuss six other basins within the Eastern Mesozoic Rift Basins that were not assessed. For all SAUs, we discuss the areal distribution of suitable CO 2 reservoir rock. We also describe the overlying sealing unit and the geologic characteristics that influence the potential CO 2 storage volume and reservoir characteristics. These characteristics include storage formation depth, gross thickness, net thickness, porosity, permeability, and groundwater salinity. Case-by-case strategies for estimating the pore volume existing within structurally and (or) stratigraphically closed traps are presented. Although assessment results are not contained in this chapter, the geologic information included herein was used to calculate the potential storage space in the SAUs.

Atlantic Coastal Plain and Eastern Mesozoic Rift B↗

Geohydrology, geochemistry, and numerical simulation of groundwater flow and land subsidence in the Bicycle Basin, Fort Irwin National Training Center, California

Groundwater pumping from Bicycle Groundwater Basin (referred to as Bicycle Basin) in the Fort Irwin National Training Center, California, began in 1967. From 1967 to December 2010, about 46,000 acre-feet of water had been pumped from the basin and transported to the Irwin Basin. During this time, not only did water levels in the basin decline by as much as 100 feet, the quality of the groundwater pumped from the basin also deteriorated in some wells. The U.S. Geological Survey collected geohydrologic data from existing wells, test holes, and 16 additional monitoring wells installed at 6 sites in Bicycle Basin during 1992–2011 to determine the quantity and quality of groundwater available in the basin. Geophysical surveys, including electrical, gravity, and seismic refraction surveys, were completed to help determine the geometry of the structural basin, delineate depths to the interface between Quaternary and Tertiary rocks, map the depth to the water table, and used to develop a geohydrologic framework and groundwater-flow model for Bicycle Basin. Water samples were used to determine the groundwater quality in the basin and to delineate potential sources of poor-quality groundwater. Analysis of stable isotopes of oxygen and hydrogen in groundwater indicated that presentday precipitation is not a major source of recharge to the basin. Tritium and carbon-14 data indicated that most of the groundwater in the basin was recharged prior to 1952 and had an apparent age of 15,625–39,350 years. Natural recharge to the basin was not sufficient to replenish the groundwater pumped from the basin. Interferograms from synthetic aperture radar data (InSAR), analyzed to evaluate land-surface subsidence between 1993 and 2010, showed 0.23 to 1.1 feet of subsidence during this period near one production well north of Bicycle Lake (dry) playa. A groundwater-flow model of Bicycle Basin was developed and calibrated using groundwater levels for 1964– 2010, and a subsidence model using land-surface deformation data for 1993–2010. Between January 1967 and December 2010, the simulated total recharge from precipitation runoff and underflow from adjacent basins was about 5,100 acre-feet and pumpage from the Bicycle Basin was about 47,000 acrefeet of water. Total outflows exceeded natural recharge during this period, resulting in a net loss of about 42,100 acre-feet of groundwater storage in the basin. The Fort Irwin National Training Center is considering various groundwater-management options in the Bicycle Basin. The groundwater-flow model was used to (1) evaluate changes in groundwater levels and subsidence with the addition of capture and recharge of simulated runoff in retention basins (scenario 1) for predevelopment through 2010; (2) simulate a base case (scenario 2) for reference; and (3) compare projections of alternative future pumping strategies for 2011–60 (scenarios 3–5). Model results from the runoff-capture simulation (scenario 1) indicated that total recharge, including runoff captured using retention basins, locally increased water levels, which partially offset, but did not mitigate, groundwater depletion associated with pumping. Groundwater-storage depletion in scenario 1 was about 14 percent less than without runoff capture. Simulated-drawdown results in model layer 1 in the eastern part of the basin indicated that, because of the captured runoff, simulated heads were as much as 100 feet higher in December 2010 than prior to the onset of development in 1967. In contrast, simulated drawdown for model without runoff capture indicated that, without captured runoff, simulated heads for December 2010 in this area were 80–90 feet lower than during the predevelopment period. Subsidence was mitigated slightly in scenario 1 compared to without runoff capture; the largest decrease in subsidence at observation sites was about 0.07 feet.

California↗

Natural aggregates of the conterminous United States

Crushed stone and sand and gravel are the two main sources of natural aggregates. These materials are commonly used construction materials and frequently can be interchanged with one another. They are widely used throughout the United States, with every State except two producing crushed stone. Together they amount to about half the mining volume in the United States. Approximately 96 percent of sand and gravel and 77 percent of the crushed stone produced in the United States are used in the construction industry. Natural aggregates are widely distributed throughout the United States in a variety of geologic environments. Sand and gravel deposits commonly are the results of the weathering of bedrock and subsequent transportation and deposition of the material by water or ice (glaciers). As such, they commonly occur as river or stream deposits or in glaciated areas as glaciofluvial and other deposits. Crushed stone aggregates are derived from a wide variety of parent bedrock materials. Limestone and other carbonates account for approximately three quarters of the rocks used for crushed stone, with granite and other igneous rocks making up the bulk of the remainder. Limestone deposits are widespread throughout the Central and Eastern United States and are scattered in the West. Granites are widely distributed in the Eastern and Western United States, with few exposures in the Midwest. Igneous rocks (excluding granites) are largely concentrated in the Western United States and in a few isolated localities in the East. Even though natural aggregates are widely distributed throughout the United States, they are not universally available for consumptive use. Some areas are devoid of sand and gravel, and potential sources of crushed stone may be covered with sufficient unconsolidated material to make surface mining impractical. In some areas many aggregates do not meet the physical property requirements for certain uses, or they may contain mineral constituents that react adversely when used as concrete aggregate. In areas where suitable natural aggregate is not available or accessible, it may become necessary to improve the quality of existing aggregate, to import aggregate from outside the area, or to substitute artificial aggregate for natural aggregate. In most cases, all of these alternatives add substantially to the cost of the final product. Even though an area may be blessed with an abundance of aggregate suitable for the intended purpose, existing land uses, zoning, or regulations may preclude commercial exploitation of the aggregate. This report also discusses the aggregate industry in general terms, including exploration, mining, and processing, as well as aggregate production rates. Proper long-range planning based on an understanding of the aggregate industry can help assure adequate supplies of aggregate.

conterminous United States↗

California State Waters Map Series — Drakes Bay and vicinity, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Drakes Bay and Vicinity map area is located in northern California, about 30 km north of San Francisco and about 65 km south of Fort Ross. The map area is in the northern part of the Gulf of the Farallones National Marine Sanctuary, and it includes all or parts of four California Marine Protected Areas. The largely undeveloped onshore part of the map area, which occupies much of the southern and southeastern parts of the Point Reyes peninsula, is used primarily for grazing, as well as recreation, as it is home to the Point Reyes National Seashore. The triangular Point Reyes peninsula, which lies completely west of the San Andreas Fault Zone, is bounded by the steep terrain of Inverness Ridge along its northeastern margin, Tomales Point at its northernmost tip, Point Reyes at its southwesternmost point, and Bolinas at its southern end. The landscape in between includes (from southeast to northwest) the sandy beaches along Drakes Bay, the estuaries of Drakes Estero and Estero de Limantour, and the long, windswept Point Reyes Beach, which is backed by an extensive dune field. The seafloor in the map area generally extends from the shoreline to water depths of about 40 to 50 m, except for the area south of the Point Reyes headland where water depths reach 60 to 70 m. This bathymetric gradient south and west of the Point Reyes headland is related to north-side-up motion along the Point Reyes Fault Zone. Except for the bathymetric gradient across the Point Reyes Fault Zone, the bedrock platform in the nearshore and inner shelf areas (50 to 60 m depth) is relatively flat (less than 1.0°) and is overlain by sand-sized to coarser grained sediment. Finer grained sediments are found in water depths greater than 60 m south of the Point Reyes headland, but they also extend into shallower (less than 40 m) water within Drakes Bay. Surficial and shallow sediments were deposited in the last about 21,000 years during the approximately 125-m sea-level rise that followed the last major lowstand associated with the Last Glacial Maximum, at which time the entire Drakes Bay and Vicinity map area was emergent and the shoreline was about 30 km south and west of the present-day shoreline. Tectonic influences that impact the shelf morphology and geology in the map area are related to local faulting, folding, uplift, and subsidence. Offshore of the Point Reyes headland, granitic basement rocks are offset vertically about 1.4 km along the Point Reyes Fault Zone; this uplift, combined with west-side-up offset on the San Andreas Fault Zone, has resulted in uplift of the Point Reyes peninsula and the adjacent shelf. Late Pleistocene uplift of marine terraces on the southern Point Reyes peninsula suggests active deformation of offshore structures west of the San Andreas Fault Zone. Pervasive stratal thinning within inferred uppermost Pliocene and Pleistocene deposits above the west strand of the Point Reyes Fault Zone suggests Quaternary active shortening of the curvilinear, northeast- to north-dipping Point Reyes Fault Zone. Lack of clear deformation in the uppermost Pleistocene and Holocene deposits suggests that activity along the Point Reyes Fault Zone has ceased or slowed since about 21,000 years ago. Seafloor habitats in the Drakes Bay and Vicinity map area range from unconsolidated continental-shelf sediment to hard substrate. Rocky-shelf outcrops and rubble are considered to be promising potential habitats for rockfish and lingcod, both of which are recreationally and commercially important species. Circulation over the continental shelf in the map area is dominated by the southward-flowing California Current, the eastern limb of the North Pacific Gyre. Associated upwelling brings cool, nutrient-rich waters to the surface, resulting in high biological productivity. The current flow generally is southeastward during the spring and summer; however, during the fall and winter, the otherwise persistent northwest winds are sometimes weak or absent, causing the California Current to move farther offshore and the Davidson Current, a weaker, northward-flowing countercurrent, to become active. Sediment transport in the map area largely is controlled by surface waves and tidal currents in the nearshore and, at depths greater than 20 to 30 m, by tidal and subtidal currents. In the map area, nearshore littoral drift of sand and coarse sediment is to the south, owing to the dominant west-northwest swell direction, and scour from large waves and tidal currents removes and redistributes sediment over large areas of the inner shelf. Tidal currents are particularly strong over the shelf in the map area, and they dominate the current regime in the nearshore. Further offshore, bottom currents generally flow to the northwest, distributing finer grained sediment accordingly.

California↗

Geologic Map of Oasis Valley Spring-Discharge Area and Vicinity, Nye County, Nevada

This map report presents the geologic framework of an area in southern Nye County, Nevada, that extends from the southern limit of the Oasis Valley spring-discharge site, northeastward to the southwest margin of the Pahute Mesa testing area, on the Nevada Test Site. This map adds new surficial mapping and revises bedrock mapping previously published as USGS Open-File Report 99-533-B. The locations of major concealed structures were based on a combination of gravity and magnetic data. This report includes a geologic discussion explaining many of the interpretations that are presented graphically on the map and sections. Additional discussion of the geologic framework of the Oasis Valley area can be found in an interpretive geophysical report and in a geologic report (USGS Open-File Report 99-533-A that was a companion product to the previously published version of this map. The map presented here covers nine 7.5-minute quadrangles centered on the Thirsty Canyon SW quadrangle. It is a compilation of one previously published quadrangle map and eight new quadrangle maps, two of which were published separately during the course of the study. The new bedrock mapping was completed by S.A. Minor from 1991 to 1995, by C.J. Fridrich from 1992 to 1998, and by P.L. Ryder from 1997 to 1998. New surficial-deposits mapping was completed by J.L. Slate and M.E. Berry in 1998 and 1999. The new bedrock and surficial mapping is partly a revision of several unpublished reconnaissance maps completed by Orkild and Swadley in the 1960's, and of previously published maps by Maldonado and Hausback (1990), Lipman and others (1966); and Sargent and Orkild (1976). Additionally, mapping of the pre-Tertiary rocks of northern Bare Mountain was compiled from Monsen and others (1992) with only minor modification. The cross sections were drawn to a depth of about 5 km below land surface at the request of hydrologists studying the Death Valley ground-water system. Below a depth of about 1 kilometer, surface constraints offer only faint guidance, and the deep interpretations shown are constrained primarily by geophysical data, and are model-dependent. The estimated thickness of the Tertiary volcanic and sedimentary strata is shown on the cross sections with an overlain blue line, which has a very rounded form because it was modeled from gravity data. Several small faults that appear on the map were omitted from the cross sections for the sake of clarity. Within the Oasis Valley basin alone, the pattern of domino-style faulting shown on the cross sections is based on an interpretation of aeromagnetic data, but is strictly schematic.

Scientific Investigations Map↗